Secretion and degradation of parathormone as a function of intracellular maturation of hormone pools

The biosynthesis, processing, and secretion of parthormone and the effect of calcium on these processes were measured in dispersed porcine parthyroid cells incubated with [(35)S]methionine. Proparathormone was detected at 10 min, the earliest time measured, and was rapidly and apparently quantitatively converted to parathormone. The half-life of the prohomormone pool was 15 min. Secretion of parathormone was detected by 20 min. In pulse-chase experiments there was a period between 20 and 40 min during which the wave of newly-synthesized parathormone was secreted. After 40 min during little additional radioactive hormone was secreted, but dibutyryl cyclic AMP, an agent that can mobilize stored parathormone, when added to the incubation mixtures enhanced radioactive parathormone secretion but only after 60 min, although it increased net hormone secretion as determined by radioimmunoassay to the same extent at all times studied. When the ionized calcium concentration of the medium was lowered, more radioactive hormone was secreted at all times but the effect was greatest on that hormone that was synthesized less than 60 min previously ; however, net hormone secretion in contrast to radioactive hormone was enhanced equally at all intervals. These data could mean that the refractoriness to secretion of parathormone 40-60 min of age was related to maturation of secretory container preparatory to storage. Low calcium (0.5 mM) stimulated hormone secretion up to fivefold compared to high calcium (3.0 mM) but did not affect synthesis of parathormone or proparathormne or conversion of the latter to hormone. During processing at least 70 percent of the intracellular parathormone was lost, presumably through proteolysis and this degradation was greater at high calcium. These data have been interpreted in light of the concept that two secretable pools of parathormone exist within the parathyroid.     

Conversion of proparathyroid hormone to parathyroid hormone by a particulate enzyme of the parathyroid gland.

The conversion of proparathyroid hormone (proparathormone) to parathyroid hormone (parathormone) by subcellular fractions of the bovine parathyroid has been investigated. The identification of the conversion product as parathormone was established by its elution postion during ion exchange chromatography and gel filtration, and by partial amino acid sequence analysis of its NH2-terminal region. Total homogenates and derived subcellular fractions (600 X g pellet, 5,000 X g pellet, 20,000 X g pellet, 190,000 X g pellet, and 190,000 X g supernatant) all catalyzed the conversion of exogenous [3H]- or [14C]prohormone. Over 60% of the converting activity was in the particulate fractions; the 190,000 X g particulate fraction contained the highest specific converting activity. The converting activity appeared to be an integral component of the membranes since it could only be partially removed by extraction with Triton X-100. The production of parathormone by the particulate converting enzyme increased with time and the concentration of enzyme protein. The optimum pH range was between 7 and 9, and the enzyme was inactive below pH 6. Conversion by the particulate enzyme was inhibited by benzamidine or chloroquine, but not by pancreatic trypsin inhibitor, indicating its dissimilarity to trypsin. When a mixture of [14C]proparathormone and [3H]parathormone was used as substrate, the particulate enzyme did not metabolize the hormone despite over 70% conversion of the prohormone to hormone and other peptides. There was a close correlation between the subcellular distribution of converting activity and that of newly formed parathormone found in the membrane fraction. These data suggest that the particulate converting activity is that concerned with the formation of parathormone in vivo.     

Single particle reconstruction of membrane proteins: A tool for understanding the 3D structure of disease-related macromolecules

Membrane proteins play important roles in cell functions such as neurotransmission, muscle contraction, and hormone secretion, but their structures are mostly undetermined. Several techniques have been developed to elucidate the structure of macromolecules; X-ray or electron crystallography, nuclear magnetic resonance spectroscopy, and high-resolution electron microscopy. Electron microscopy-based single particle reconstruction, a computer-aided structure determination method, reconstructs a three-dimensional (3D) structure from projections of monodispersed protein. A large number of particle images are picked up from EM films, aligned and classified to generate two-dimensional (2D) averages, and, using the Euler angle of each 2D average, reconstructed into a 3D structure. This method is challenging due to the necessity for close collaboration between classical biochemistry and innovative information technology, including parallel computing. However, recent progress in electron microscopy, mathematical algorithms, and computational ability has greatly increased the subjects that are considered to be primarily addressable using single particle reconstruction. Membrane proteins are one of these targets to which the single particle reconstruction is successfully applied for understanding of their structures. In this paper, we will introduce recently reconstructed channel-related proteins and discuss the applicability of this technique in understanding molecular structures and their roles in pathology.     

The three-dimensional morphology of aggregates of native cotton cellulose microfibrils

The three-dimensional morphology of native bacterial cellulose is confirmed by scanning electron microscopy. In addition, it is shown by scanning electron microscopy, and transmission electron microscopy with positive staining by phosphotungstic acid ions that aggregates of microfibrils of native cotton cellulose have a similar structure. The results are consistent with previous reports on microfibrils of algal cellulose. These observations exclude a simple spinneret process as a mechanism of formation of the microfibrils of these sources of cellulose.     

The mode of conversion of proparathormone to parathormone by a particulate converting enzymic activity of the parathyroid gland

The cleavage products from the conversion of proparathormone to parathormone by a bovine and porcine parathyroid microsomal converting activity have been analyzed. In the conversion reaction, the first 6 amino acid residues of the prohormone (Lys-Ser-Val-Lys-Lys-Arg-) are released as an intact hexapeptide. This is rapidly converted to a pentapeptide by removal of the NH2-terminal lysine and then to a tetrapeptide by removal of the COOH-terminal arginine. In order to test for the presence of a postulated COOH-terminal extension of the parathormone sequence in proparathormone, mixtures of 14C-proparathormone and 3H-parathormone were subjected to digestion by trypsin or Staphylococcus aureus protease. The resulting radioactive peptides from the hormone and its precursor were compared. There was no evidence that any fragments different from those from the hormone were released from the prohormone except those accounted for by the NH2-terminal hexapeptide adduct on proparathormone. Thus, the conversion of the prohormone to the hormone catalyzed by the microsomal membrane activity requires only the cleavage of this hexapeptide.     

TomoJ: tomography software for three-dimensional reconstruction in transmission electron microscopy

Background  

Transmission electron tomography is an increasingly common three-dimensional electron microscopy approach that can provide new insights into the structure of subcellular components. Transmission electron tomography fills the gap between high resolution structural methods (X-ray diffraction or nuclear magnetic resonance) and optical microscopy. We developed new software for transmission electron tomography, TomoJ. TomoJ is a plug-in for the now standard image analysis and processing software for optical microscopy, ImageJ.     

Three-dimensional structure of unstained, frozen-hydrated extended tails of bacteriophage T4

Unsupported, unstained frozen-hydrated extended tails of bacteriophage T4 have been studied by cryo-electron microscopy. Their three-dimensional structure has been reconstructed after correlation and averaging of the information from different particles. While the reconstructions of hydrated tails show all the features found by conventional electron microscopy, they are characterized by an open structure. Individual subunits constituting the axial repeat cannot be outlined unambiguously, as the density connectivity is sensitive to the phase-contrast transfer function effects. In order to minimize these effects, we found that the best data set for three-dimensional reconstruction is composed of layer-lines corrected for the phase-contrast transfer function and an uncorrected equator.     

High data output and automated 3D correlative light-electron microscopy method

Correlative light/electron microscopy (CLEM) allows the simultaneous observation of a given subcellular structure by fluorescence light microscopy (FLM) and electron microscopy. The use of this approach is becoming increasingly frequent in cell biology. In this study, we report on a new high data output CLEM method based on the use of cryosections. We successfully applied the method to analyze the structure of rough and smooth Russell bodies used as model systems. The major advantages of our method are (i) the possibility to correlate several hundreds of events at the same time, (ii) the possibility to perform three-dimensional (3D) correlation, (iii) the possibility to immunolabel both endogenous and recombinantly expressed proteins at the same time and (iv) the possibility to combine the high data analysis capability of FLM with the high precision-accuracy of transmission electron microscopy in a CLEM hybrid morphometry analysis. We have identified and optimized critical steps in sample preparation, defined routines for sample analysis and retracing of regions of interest, developed software for semi/fully automatic 3D reconstruction and defined preliminary conditions for an hybrid light/electron microscopy morphometry approach.     

Structure of complex viruses and virus-infected cells by electron cryo tomography

In microbiology, and in particular in virus research, electron microscopy (EM) is an important tool, offering a broad approach for investigating viral structure throughout their intracellular and extracellular life cycles. Currently, molecular tools and rapid developments in advanced light microscopy dominate the field and supply an enormous amount of information concerning virus biology. In recent years, numerous fascinating high-resolution EM structures obtained by single-particle electron cryo microscopy (cryo-EM) were revealed for viral particles that possess icosahedral symmetry. However, no comprehensive three-dimensional analysis of complex viruses or viruses within cells has yet been achieved using EM. Recent developments in electron cryo-tomography render this a proficient tool for the analysis of complex viruses and viruses within cells in greater detail.     

Circular dichroism studies of sheep beta-lipotropic hormone.

The far ultraviolet circular dichroism spectra of sheep beta-lipotropic hormone (beta-LPH) were recorded under different conditions of pH, temperature, salt concentration, and solvent composition. Results confirm the stability of the hormone in strong basic or acidic solutions; moreover, temperatures up to 50 degrees C do not seem to affect noticeably the conformation of beta-LPH. However, increasing the NaC1 concentration or addition of dioxane in the solution brings about a conformational transition of the chain, interpreted as an increase in the helical content. The method of Yang (Chen, Y.H., Yang, J. T. & Martinez, H. M. (1972) Biochemistry 11, 4120-4131) was used to compute the proportion of helical, beta, and unordered forms of the hormone chain. The proportions are compared with those obtained from Fasman's predictive method (Chou, P. Y & Fasman, G. D. (1974) Biochemistry 13, 211-221 and Chou, P. Y. & Fasman, G. D. (1974) Biochemistry 13, 222-245) based on the known amino acid sequence of beta-LPH.     

Three-dimensional approaches to the residual structure of histone-depleted HeLa cell nuclei

Histone-depleted nuclei were prepared by high-salt extraction of interphase HeLa cell nuclei. A large amount of the nuclear DNA remained associated with a rapidly sedimenting residual nuclear structure including cytoplasmic (intermediate filament) and nuclear (matrix and lamina) proteins. Electron microscopy allowed detection in the insoluble structure of a residual nuclear envelope, nucleolar residues, and an intranuclear network whose correspondence with components of in situ fixed nuclei is discussed. Using three-dimensional electron microscopy, it is further demonstrated that the salt-insoluble structure remaining after histone depletion in 2 M NaCl is highly ordered. This is of the utmost importance when considering the roles reportedly ascribed to this structure in nuclear functions.     

Three-dimensional structure of the vacuolar ATPase. Localization of subunit H by difference imaging and chemical cross-linking

The structure of the proton-pumping vacuolar ATPase (V-ATPase) from bovine brain clathrin coated vesicles was analyzed by electron microscopy and single molecule image analysis. A three-dimensional structural model of the complex was calculated by the angular reconstitution method at a resolution of 27 A. Overall, the appearance of the V(0) and V(1) domains in the three-dimensional model of the intact bovine V-ATPase resembles the models of the isolated bovine V(0) and yeast V(1) domains determined previously. To determine the binding position of subunit H in the V-ATPase, electron microscopy and cysteine-mediated photochemical cross-linking were used. Difference maps calculated from projection images of intact bovine V-ATPase and a V-ATPase preparation in which the two H subunit isoforms were removed by treatment with cystine revealed less protein density at the bottom of the V(1) in the subunit H-depleted enzyme, suggesting that subunit H isoforms bind at the interface of the V(1) and V(0) domains. A comparison of three-dimensional models calculated for intact and subunit H-depleted enzyme indicated that at least one of the subunit H isoforms, although poorly resolved in the three-dimensional electron density, binds near the putative N-terminal domain of the a subunit of the V(0). For photochemical cross-linking, unique cysteine residues were introduced into the yeast V-ATPase B subunit at sites that were localized based on molecular modeling using the crystal structure of the mitochondrial F(1) domain. Cross-linking was performed using the photoactivatable sulfhydryl reagent 4-(N-maleimido)benzophenone. Cross-linking to subunit H was observed from two sites on subunit B (E494 and T501) predicted to be located on the outer surface of the subunit closest to the membrane. Results from both electron microscopy and cross-linking analysis thus place subunit H near the interface of the V(1) and V(0) domains and suggest a close structural similarity between the V-ATPases of yeast and mammals.     

3D electron microscopy of biological nanomachines: principles and applications

Transmission electron microscopy is a powerful technique for studying the three-dimensional (3D) structure of a wide range of biological specimens. Knowledge of this structure is crucial for fully understanding complex relationships among macromolecular complexes and organelles in living cells. In this paper, we present the principles and main application domains of 3D transmission electron microscopy in structural biology. Moreover, we survey current developments needed in this field, and discuss the close relationship of 3D transmission electron microscopy with other experimental techniques aimed at obtaining structural and dynamical information from the scale of whole living cells to atomic structure of macromolecular complexes. Presented at the joint biannual meeting of the SFB-GEIMM-GRIP, Anglet France, 14–19 October, 2006.     

Cellular and body scale morphology of Heterocapsa huensis sp. nov. (Peridiniales, Dinophyceae) found in Hue, Vietnam

Cellular and body scale structure of a new armored dinoflagellate Heterocapsa huensis , collected from Hue, Vietnam were investigated. Morphology of motile cell was observed by light, fluorescent and scanning electron microscopy, and body scale structure was examined by whole mounts of transmission electron microscopy. Cells of H. huensis were ellipsoid with a spherical nucleus located in the posterior and multiple pyrenoids located above the nucleus; this arrangement was similar to that of Heterocapsa pygmaea . Transmission electron microscopy revealed ultrastructure of the body scales consisted of a rounded triangular basal plate and three-dimensional ornaments. Structure of the basal plate resembles that of Heterocapsa illdefina ; however, the number of the peripheral spine is different from that of H. illdefina and this structure has never been reported from Heterocapsa species. A new Heterocapsa species, H. huensis Iwataki et Matsuoka sp. nov., is described based on positions of organelles and body scale ultrastructure.     

Novel techniques in electron microscopy

Emerging techniques in electron microscopy promise to yield a wide range of new information about the nervous system. Aided by the development of detectors, electron optics, energy filters, computer automation and preparative methods, electron tomography now provides three-dimensional structures over a scale ranging from single receptor molecules to synapses and neurons. To relate structure to function, a variety of correlative methods are being developed, including protein tags observable both by light microscopy of living cells and, subsequently, by electron microscopy. It is also becoming possible to measure functionally important ions like Ca(2+) in cellular compartments at a scale of about 10 nm by exploiting new advances in electron energy loss and X-ray spectroscopic imaging.     

Chicken liver H-protein, a component of the glycine cleavage system. Amino acid sequence and identification of the N epsilon-lipoyllysine residue

The complete amino acid sequence of H-protein from chicken liver was determined by aligning peptides obtained by cyanogen bromide, endoproteinase Lys-C, Staphylococcus aureus V8 protease, and chymotrypsin cleavage together with the partial NH2- and COOH-terminal sequence of the intact protein. H-protein consists of 125 amino acids and a lipoic acid moiety linked to lysine 59. The sequence is: (sequence in text). The lysyl residue involved in lipoic acid attachment is indicated with an asterisk. The molecular weight including lipoic acid is calculated to be 13,883. From the secondary structure predicted by the method of Chou and Fasman (Chou, P. Y., and Fasman, G. D. (1978) Adv. Enzymol. 47, 45-148) the lipoic acid binding region shows alpha-helical structure and is predicted to be an interior portion of the protein from the hydropathic profile according to Kyte and Doolittle (Kyte, J., and Doolittle, R. F. (1982) J. Mol. Biol. 157, 105-132).     

Electron crystallographic methods for investigating gap junction structure

Gap junctions are clusters of closely packed intercellular membrane channels embedded in the plasma membranes of two adjoining cells. The central pore of the membrane channels serves as a conduit between cell cytoplasms for molecules less than 1000 Da in size. Advances in the purification of gap junctions and electron cryocrystallography and computer reconstruction techniques have produced new insights into the intercellular channel structure. Methods are described here for the purification of gap junction membranes, biochemical treatments to produce hemichannel layers ("split junctions"), assessment of the purity of gap junction preparations, electron cryomicroscopy, image processing and reconstruction, three-dimensional visualization, and interpretation. The critical step in electron crystallographic structure determination remains the isolation of crystalline material in sufficient and pure quantities for recording of electron microscope images. Along with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting, the quality of gap junction purification is assessed using electron microscopy of negatively stained preparations. Electron microscopy is also used to assess the crystallinity of the purified gap junctions and split junctions. Electron cryocrystallography is a powerful technique for high-resolution structural characterization. Image processing is used to combine and enhance two-dimensional images. Electron crystallographic analysis is used to generate a three-dimensional structure from a set of electron micrographs. This three-dimensional information is extracted from a set of images recorded after tilting the specimen in the electron microscope stage and recombined using Fourier analysis techniques analogous to those used in X-ray crystallography. Computer modeling of the three-dimensional gap junction structures is a useful tool for analyzing hemichannel docking.     

New insights into mutable collagenous tissue: correlations between the microstructure and mechanical state of a sea-urchin ligament

The mutable collagenous tissue (MCT) of echinoderms has the ability to undergo rapid and reversible changes in passive mechanical properties that are initiated and modulated by the nervous system. Since the mechanism of MCT mutability is poorly understood, the aim of this work was to provide a detailed morphological analysis of a typical mutable collagenous structure in its different mechanical states. The model studied was the compass depressor ligament (CDL) of a sea urchin (Paracentrotus lividus), which was characterized in different functional states mimicking MCT mutability. Transmission electron microscopy, histochemistry, cryo-scanning electron microscopy, focused ion beam/scanning electron microscopy, and field emission gun-environmental scanning electron microscopy were used to visualize CDLs at the micro- and nano-scales. This investigation has revealed previously unreported differences in both extracellular and cellular constituents, expanding the current knowledge of the relationship between the organization of the CDL and its mechanical state. Scanning electron microscopies in particular provided a three-dimensional overview of CDL architecture at the micro- and nano-scales, and clarified the micro-organization of the ECM components that are involved in mutability. Further evidence that the juxtaligamental cells are the effectors of these changes in mechanical properties was provided by a correlation between their cytology and the tensile state of the CDLs.     

Bacterial surface proteins. Some structural, functional and evolutionary aspects

The structure of several eubacterial and archaebacterial surface (glyco)proteins as determined by three-dimensional electron microscopy is described. Particular emphasis is placed on surface proteins which interact with membranes. Some structure-function relationships deduced from the structural information, such as shape maintenance and molecular recognition phenomena, are discussed.