Characterization of the endogenous plasmid from Pseudomonas alcaligenes NCIB 9867: DNA sequence and mechanism of transfer

The endogenous plasmid pRA2 from Pseudomonas alcaligenes NCIB 9867 was determined to have 32,743 bp with a G+C content of 59.8%. Sequence analysis predicted a total of 29 open reading frames, with approximately half of them contributing towards the functions of plasmid replication, mobilization, and stability. The Pac25I restriction-modification system and two mobile elements, Tn5563 and IS1633, were physically localized. An additional eight open reading frames with unknown functions were also detected. pRA2 was genetically tagged with the OmegaStr(r)/Spc(r) gene cassette by homologous recombination. Intrastrain transfer of pRA2-encoded genetic markers between isogenic mutants of P. alcaligenes NCIB 9867 were observed at high frequencies (2.4 x 10(-4) per donor). This transfer was determined to be mediated by a natural transformation process that required cell-cell contact and was completely sensitive to DNase I (1 mg/ml). Efficient transformation was also observed when pRA2 DNA was applied directly onto the cells, while transformation with foreign plasmid DNAs was not observed. pRA2 could be conjugally transferred into Pseudomonas putida RA713 and KT2440 recipients only when plasmid RK2/RP4 transfer functions were provided in trans. Plasmid stability analysis demonstrated that pRA2 could be stably maintained in its original host, P. alcaligenes NCIB 9867, as well as in P. putida RA713 after 100 generations of nonselective growth. Disruption of the pRA2 pac25I restriction endonuclease gene did not alter plasmid stability, while the pRA2 minireplicon exhibited only partial stability. This indicates that other pRA2-encoded determinants could have significant roles in influencing plasmid stability.     

Selection of cryptic 5'' splice sites by group II intron RNAs in vitro.

Recognition of 5' splice points by group I and group II self-splicing introns involves the interaction of exon sequences--directly preceding the 5' splice site--with intronic sequence elements. We show here that the exon binding sequences (EBS) of group II intron aI5c can accept various substitutes of the authentic intron binding sites (IBS) provided in cis or in trans. The efficiency of cleavages at these cryptic 5' splice sites was enhanced by deletion of the authentic IBS2 element. All cryptic 5' cleavage sites studied here were preceded by an IBS1 like sequence; indicating that the IBS1/EBS1 pairing alone is sufficient for proper 5' splice site selection by the intronic EBS element. The results are discussed in terms of minimal requirements for 5' cleavages and position effects of IBS sites relative to the intron.     

Guiding ribozyme cleavage through motif recognition: the mechanism of cleavage site selection by a group ii intron ribozyme

The mechanism by which group II introns cleave the correct phosphodiester linkage was investigated by studying the reaction of mutant substrates with a ribozyme derived from intron ai5gamma. While fidelity was found to be quite high in most cases, a single mutation on the substrate (+1C) resulted in a dramatic loss of fidelity. When this mutation was combined with a second mutation that induces a bulge in the exon binding site 1/intron binding site 1 (EBS1/IBS1) duplex, the base-pairing register of the EBS1/IBS1 duplex was shifted and the cleavage site moved to a downstream position on the substrate. Conversely, when mismatches were incorporated at the EBS1/IBS1 terminus, the duplex was effectively truncated and cleavage occurred at an upstream site. Taken together, these data demonstrate that the cleavage site of a group II intron ribozyme can be tuned at will by manipulating the thermodynamic stability and structure of the EBS1/IBS1 pairing. The results are consistent with a model in which the cleavage site is not designated through recognition of specific nucleotides (such as the 5'-terminal residue of EBS1). Instead, the ribozyme detects a structure at the junction between single and double-stranded residues on the bound substrate. This finding explains the puzzling lack of phylogenetic conservation in ribozyme and substrate sequences near group II intron target sites.     

The Cryphonectria parasitica mitochondrial rns gene: Plasmid-like elements, introns and homing endonucleases

The mt-rns gene of Cryphonectria parasitica is 9872 bp long and includes two group I and two group II introns. An analysis of intronic protein-encoding sequences revealed that LAGLIDADG ORFs, which usually are associated with group I introns, were transferred at least twice into group II introns. A plasmid-like mitochondrial element (plME) that appears in high amounts in previously mutagen-induced mit1 and mit2 hypovirulent mutants of the Ep155 standard virulent strain of C. parasitica was found to be derived from a short region of the mt-rns gene, including the exon 1 and most of the first intron. The plME is a 4.2-kb circular, multimeric DNA and an autonomously-replicating mtDNA fragment. Although sexual transmission experiments indicate that the plME does not directly cause hypovirulence, its emergence is one manifestation of the many complex molecular and genetic events that appear to underlie this phenotype.     

Potential for alternative intron-exon pairings in group II intron RmInt1 from Sinorhizobium meliloti and its relatives

Ribozyme constructs derived from group II intron RmInt1 of Sinorhizobium meliloti self-splice in vitro when incubated under permissive conditions, but exon ligation is unusually inefficient when the 5' exon is truncated close to the IBS2 intron-binding site. One plausible explanation for this observation is the presence of an alternative intron-exon pairing between an intron segment that overlaps with the EBS2 exon-binding site and a 5' exon site located just distal of IBS2 relative to the splice junction. Strikingly, the existence of this pairing is supported by comparative sequence analysis of introns related to RmInt1.     

In vitro characterization of the splicing efficiency and fidelity of the RmInt1 group II intron as a means of controlling the dispersion of its host mobile element

Group II introns are catalytic RNAs that are excised from their precursors in a protein-dependent manner in vivo. Certain group II introns can also react in a protein-independent manner under nonphysiological conditions in vitro. The efficiency and fidelity of the splicing reaction is crucial, to guarantee the correct formation and expression of the protein-coding mRNA. RmInt1 is an efficient mobile intron found within the ISRm2011-2 insertion sequence in the symbiotic bacterium Sinorhizobium meliloti. The RmInt1 intron self-splices in vitro, but this reaction generates side products due to a predicted cryptic IBS1* sequence within the 3′ exon. We engineered an RmInt1 intron lacking the cryptic IBS1* sequence, which improved the fidelity of the splicing reaction. However, atypical circular forms of similar electrophoretic mobility to the lariat intron were nevertheless observed. We analyzed a run of four cytidine residues at the 3′ splice site potentially responsible for a lack of fidelity at this site leading to the formation of circular intron forms. We showed that mutations of residues base-pairing in the tertiary EBS3–IBS3 interaction increased the efficiency and fidelity of the splicing reaction. Our results indicate that RmInt1 has developed strategies for decreasing its splicing efficiency and fidelity. RmInt1 makes use of unproductive splicing reactions to limit the transposition of the insertion sequence into which it inserts itself in its natural context, thereby preventing potentially harmful dispersion of ISRm2011-2 throughout the genome of its host.     

Identification of Pseudomonas alcaligenes chromosomal DNA in the plasmid DNA of the chlorobenzene-degrading recombinant Pseudomonas putida strain CB1-9

The recombinant Pseudomonas putida strain CB1-9, which acquired the ability to grow on chlorobenzenes, contains a 33-kilobase (kb) plasmid (pKFL3) which lacked homology to an indigenous 15-kb plasmid (pKFL1) in Pseudomonas alcaligenes C-0 parent but was homologous to a 55-kb plasmid (pKFL2) from the P. putida R5-3 parent. Chromosomal DNA of P. alcaligenes C-0 hybridized to probes prepared from pKFL3 but not to probes prepared from pKFL2. A single clone from a genomic library of P. alcaligenes C-0 hybridized to EcoRI-digested pKFL3. Southern blot hybridization with the insert DNA from that clone identified homology with specific restriction enzyme fragments in pKFL3. The ability of the recombinant to utilize 3-chlorobenzoate, chlorobenzene, and 1,4-dichlorobenzene as well as its loss of utilization of xylenes and methylbenzoates appears to be associated with the transfer and integration of chromosomal DNA from P. alcaligenes into a Tol-like plasmid of P. putida R5-3.     

Identification of Pseudomonas alcaligenes chromosomal DNA in the plasmid DNA of the chlorobenzene-degrading recombinant Pseudomonas putida strain CB1-9.

The recombinant Pseudomonas putida strain CB1-9, which acquired the ability to grow on chlorobenzenes, contains a 33-kilobase (kb) plasmid (pKFL3) which lacked homology to an indigenous 15-kb plasmid (pKFL1) in Pseudomonas alcaligenes C-0 parent but was homologous to a 55-kb plasmid (pKFL2) from the P. putida R5-3 parent. Chromosomal DNA of P. alcaligenes C-0 hybridized to probes prepared from pKFL3 but not to probes prepared from pKFL2. A single clone from a genomic library of P. alcaligenes C-0 hybridized to EcoRI-digested pKFL3. Southern blot hybridization with the insert DNA from that clone identified homology with specific restriction enzyme fragments in pKFL3. The ability of the recombinant to utilize 3-chlorobenzoate, chlorobenzene, and 1,4-dichlorobenzene as well as its loss of utilization of xylenes and methylbenzoates appears to be associated with the transfer and integration of chromosomal DNA from P. alcaligenes into a Tol-like plasmid of P. putida R5-3.     

Excision of the Sinorhizobium meliloti group II intron RmInt1 as circles in vivo

Excision of group II introns as circles has been described only for a few eukaryotic introns and little is known about the mechanisms involved, the relevance or consequences of the process. We report that splicing of the bacterial group II intron RmInt1 in vivo leads to the formation of both intron lariat and intron RNA circles. We determined that besides being required for the intron splicing reaction, the maturase domain of the intron-encoded protein also controls the balance between lariat and RNA intron circle production. Furthermore, comparison with in vitro self-splicing products indicates that in vivo, the intron-encoded protein appears to promote the use of a correct EBS1/IBS1 intron-exon interaction as well as cleavage at, or next to, the expected 3' splice site. These findings provide new insights on the mechanism of excision of group II introns as circles.     

趋化信号转导基因cheA突变对Pseudomonas putida DLL-1甲基对硫磷的趋化性及原位降解的影响

Pseudomonas putida DLL-1是一株甲基对硫磷(MP)高效降解菌株,同时对MP具有趋化性。cheA基因是菌株趋化信号转导过程中负责编码组氨酸激酶的基因,为了研究菌株趋化性在农药原位降解中的作用,通过基因打靶的方式使P.putida DLL-1染色体上单拷贝的cheA基因失活,成功地获得了MP的趋化突变株P.putida DAK,突变株与野生菌株生长能力没有显著差异。通过土壤盆钵试验(MP浓度为50mg/kg),发现在灭菌与未灭菌土壤中趋化突变株对MP的降解能力低于原始出发菌株DLL-1约20%~30%,说明菌株DLL-1趋化性的丧失会减慢其对农药的降解,趋化性在农药的原位降解过程中发挥重要作用。     

Origin and evolution of the chloroplast trnK (matK) intron: a model for evolution of group II intron RNA structures

The trnK intron of plants encodes the matK open reading frame (ORF), which has been used extensively as a phylogenetic marker for classification of plants. Here we examined the evolution of the trnK intron itself as a model for group II intron evolution in plants. Representative trnK intron sequences were compiled from species spanning algae to angiosperms, and four introns were newly sequenced. Phylogenetic analyses showed that the matK ORFs belong to the ML (mitochondrial-like) subclass of group II intron ORFs, indicating that they were derived from a mobile group II intron of the class. RNA structures of the introns were folded and analyzed, which revealed progressive RNA structural deviations and degenerations throughout plant evolution. The data support a model in which plant organellar group II introns were derived from bacterial-like introns that had "standard" RNA structures and were competent for self-splicing and mobility and that subsequently the ribozyme structures degenerated to ultimately become dependent upon host-splicing factors. We propose that the patterns of RNA structure evolution seen for the trnK intron will apply to the other group II introns in plants.     

The chloroplastchIL gene of the green algaChlorella vulgaris C-27 contains a self-splicing group I intron

ThechiL gene product is involved in the light-independent synthesis of chlorophyll in photosynthetic bacteria, green algae and non-flowering plants. The chloroplast genome ofChlorella vulgaris strain C-27 contains the first example of a splitchiL gene, which is interrupted by a 951 bp group I intron in the coding region. In vitro synthesized pre-mRNA containing the entire intron and parts of the flanking exon sequences is able to efficiently self-splice in vitro in the presence of a divalent and a monovalent cation and GTP, to yield the ligated exons and other splicing intermediates characteristic of self-splicing group I introns. The 5 and 3 splice sites were confirmed by cDNA sequencing and the products of the splicing reaction were characterized by primer extension analysis. The absence of a significant ORF in the long P9 region (522 nt), separating the catalytic core from the 3 splice site, makes this intron different from the other known examples of group I introns. Guanosine-mediated attack at the 3 splice site and the presence of G-exchange reaction sites internal to the intron are some other properties demonstrated for the first time by an intron of a protein-coding plastid gene.