Isoelectric focusing in immobilized pH gradients in the pH 10-11 range

With the synthesis of a new, strongly basic Immobiline (pK 10.3 at 10 degrees C) it has been possible to formulate a new pH 10-11 recipe for focusing very alkaline proteins, not amenable to fractionation with conventional isoelectric focusing in carrier ampholyte buffers. In this formulation, water is added as an acidic Immobiline having pK = 14 and a unit molar concentration (or with a pK = 15.74 and standard 55.56 molarity) since around pH 11 its buffering power becomes significant. The gel contains a 'conductivity quencher', i.e. a density gradient incorporated in the matrix, with the dense region located on the cathodic side (pH 11) for (a) smoothing the voltage gradient on the separation cell and (b) reducing the anodic electrosmotic flow due to the net positive charge acquired by the matrix at pH 11 (1 mM excess protonated amino groups to act as counterions to the 1 mm OH- groups in the bulk water solution generated by the local value of pH 11). Excellent focusing is obtained for such alkaline proteins as lysozyme (pI 10.55), So-6 (a leaf protein, pI 10.49), cytochrome c (pI 10.45) and ribonuclease (pI 10.12).     

Isoelectric focusing in immobilized pH gradients: generation and optimization of wide pH intervals with two-chamber mixers

A new technique for generating extended pH gradients (5 pH units) in Immobiline gels is reported. The previously described (J. Biochem. Biophys. Methods 7, 1983, 123-142) five-chamber gradient mixer has been replaced by a two-vessel device. A single mixture of the available Immobilines (pK 3.6, 4.6, 6.2, 7.0, 8.5 and 9.3) is made, with relative concentrations adjusted so as to produce the most uniform buffering power throughout the desired pH interval. This mixture is then divided into two portions, which are titrated to the extremes of the required pH span with an acidic titrant (Immobiline pK approximately 1) and a basic species (Immobiline pK 9.95). Highly reproducible pH gradients (pH 4-9) are thus generated, which appear extremely useful for the first dimensioned of 2-dimensional techniques. Our previously reported computer program has been implemented with an optimization algorithm which, given any cocktail of Immobilines, automatically adjusts the relative initial concentrations until the smoothest possible beta power is found. For the first time it is possible to perform IEF under controlled physico-chemical parameters: pH span and linearity, beta power, ionic strength and molarity of the buffering species.     

Preparative isoelectric focusing in immobilized pH gradients. I. General principles and methodology

A new method for preparative protein purification is described, based on the use of Immobiline matrices. After electrofocusing, the protein zone of interest is recovered by electrophoretic transfer to a hydroxyapatite gel, from which it is eluted with 0.2 M phosphate buffer, pH 6.8, with yields for the proteins studied in the range 76-98%. For six different proteins, the focusing step gives a common upper limit of approximately 45 mg protein/ml gel as mean concentration in a focused protein zone. It is demonstrated that in practical preparative work, components with a pI difference of 0.007 pH units can be completely resolved, and that on a 5-mm-thick gel of dimensions 240 X 110 mm, samples containing as much as 400 mg of the major protein component can be applied. Focusing of large amounts of a salt-containing sample is demonstrated with the aid of human serum. A theoretical expression is given relating the concentration distribution and maximum protein concentration within a focused zone to the applied voltage, the pH slope used and the zone width. Based on this expression and the finding of an upper concentration limit for a protein we shown how to optimize the parameters in preparative work with immobilized pH gradients in relation to the separation power needed. Finally, it is shown that, in comparison with conventional preparative electrofocusing in polyacrylamide gels, immobilized pH gradients allow a ten-fold increase in load, whilst still giving a resolution comparable to that of analytical isoelectric focusing.     

Isoelectric focusing as the crow flies

The evolution of isoelectric focusing is traced back over the years, from a somewhat shaky origin to present-day immobilized pH gradients. Four generations of methodology are classified and discussed: (A) Kolin's approach, consisting of a two-step technique, generation of a pH gradient by diffusion followed by a rapid electrokinetic protein separation; (B) Svensson-Rilbe's approach, consisting of creating a pH gradient in an electric field by utilizing as buffers a multitude of carrier ampholytes, i.e. of amphoteric species possessing good buffering capacity and conductivity at their pI; (C) immobilized pH gradients, by which non-amphoteric buffers and titrants (acrylamido weak acids and bases), titrated around their pK values, are grafted (insolubilized) onto a polyacrylamide gel matrix and (D) mixed-bed carrier ampholyte-Immobiline gel, by which a soluble, carrier ampholyte generated pH gradient coexists in the same matrix with an insoluble, Immobiline generated, pH gradient.     

Isoelectric focusing in immobilized pH gradients: Principle,methodology and some applications

A new technique for generating pH gradients in isoelectric focusing is described, based on the principle that the buffering groups are covalently linked to the matrix used as anticonvective medium. For the generation of this type of pH gradient in polyacrylamide gels, a set of buffering monomers, called Immobiline (in analogy with Ampholine), is used. The pH gradient gels are cast in the same way as pore gradient gels, but instead of varying the acrylamide content, the light and heavy solutions are adjusted to different pH values with the aid of the Immobiline buffers. Available Immobiline species make it possible to generate any narrow linear pH gradient between pH 3 and 10. The behaviour of these types of gradients in isoelectric focusing is described.Immobilized pH gradients show a number of advantages compared with carrier ampholyte generated pH gradients. The most important are: (1) the cathodic drift is completely abolished; (2) they give higher resolution and higher loading capacitu; (3) they have uniform conductivity and buffering capacity; (4) they represent a milieu of known and controlled ionic strenght.     

Direct recovery of proteins into a free-liquid phase after preparative isoelectric focusing in immobilized pH gradients

A new method for electrophoretic retrieval of protein zones from Immobiline matrices is described, based on elution directly in a free liquid phase, rather than in ion-exchange beads or molecular sieves, as previously described. The chopped Immobiline gel is loaded on top of a 5% T stacking gel, 6-10 mm in height, and forced to transverse it and collect into a chamber, filled with 20% sucrose solution, closed on its anodic side by a dialysis sac. The transfer is practically quantitative, for most proteins, after 30-60 min of zone electrophoresis at 10 W (300 V potential differential). Recovery of protein mass is in general better than 90%, while for enzyme activity is in the range of 60-80%. For preserving enzyme integrity, the following precautions are recommended: short electrophoretic times; avoidance of anodic oxidation; chilling of the buffer in the anodic chamber; and use of low levels (2-5 mM) of the specific enzyme substrate throughout the entire electrophoretic system (cathode, anode and gel plug).     

Kinetics of the hydrolysis of cellobiose and p-nitrophenyl-beta-D-glucoside by cellobiase of Trichoderma viride.

Cellobiase has been isolated from the crude cellulase mixture of enzymes of Trichoderma viride using column chromatographic and ion-exchange methods. The steady-state kinetics of the hydrolysis of cellobiose have been investigated as a function of cellobiose and glucose concentrations, pH of the solution, temperature, and dielectric constant, using isopropanol-buffer mixtures. The results show that (i) there is a marked activation of the reaction by initial glucose concentrations of 4 X 10(-3) M to 9 X 10(-2) M and strong inhibition of the reaction at higher initial concentrations, (ii) the log rate -pH curve has a maximum at pH 5.2 and enzyme pK values of 3.5 and 6.8, (iii) the energy of activation at pH 5.1 is 10.2 kcal mol-1 over the temperature range 5-56 degrees C, and (iv) the rate decreases from 0 to 20% (v/v) isopropanol. The hydrolysis by cellobiase (EC 3.2.1.21) of p-nitrophenyl-beta-D-glucoside was examined by pre-steady-state methods in which [enzyme]0 greater than [substrate]0, and by steady-state methods as a function of pH and temperature. The results show (i) a value for k2 of 21 S-1 at pH 7.0 (where k2 is the rate constant for the second step in the assumed two-intermediate mechanism (formula: see text), (ii) a log rate -pH curve, significantly different from that for hydrolysis of cellobiose, in which the rate increases with decreasing pH below pH 4.5, is constant in the region pH 4.5-6, and decreases above pH 6 (exhibiting an enzyme pK value of 7.3), and (iii) an activation energy of 12.5 kcal mol-1 at pH 5.7 over the temperature range 10-60 degrees C.     

pH gradients generated by polyprotic buffers. II. Experimental validation

The experimental validation refers to the computer program reported in the companion paper, able to simulate the course of pH, buffering power (beta) and ionic strength (I) of polyprotic buffers (either singly or in a mixture) titrated over any pH range. With simple oligoamines (up to five nitrogens) it is shown that it is impossible to generate linear pH gradients in the pH 4-10 interval, unless they are mixed in appropriate ratios. With pentaethylene hexamine, when used alone, it is possible to create a linear pH 4-10 interval, provided the molarity ratios are altered in the two chambers of the gradient mixer. The general rule operating for generation of linear pH intervals is constancy of buffering power throughout the titration. Local minima of beta produce steeper gradients, while local beta maxima flatten it. The ideal delta pK to arrange for linear pH gradients during titration is centred around 1 pH unit; thus polyprotic buffers with very large delta pK values (e.g., EDTA) appear to be totally useless for this purpose. The present computing algorithms should be quite efficient for optimizing existing buffer recipes for chromatofocusing or ampholyte displacement chromatography or for creating new, properly tailored, buffer mixtures.     

Amphoteric, isoelectric immobiline membranes for preparative isoelectric focusing

Amphoteric, isoelectric agarose membranes, as devised by Martin and Hampson [Martin, A.J.P. and Hampson, F. (1978) J. Chromatogr. 159, 101-110], are found unsuitable for blocking electroendosmosis in multi-compartment electrolysers during preparative isoelectric focusing, due to the poor and highly unpredictable incorporation of carboxyls and amino groups on the polysaccharide moiety. New, polyacrylamide-based membranes are described, containing as buffers and titrants the Immobiline chemicals used to produce immobilized pH gradients. These new membranes are supported on both faces by a non-woven polypropylene cloth, a material exhibiting minimal adsorption properties for proteins. Due to the extensively developed Immobiline technology, membranes with highly predictable isoelectric points, well-defined buffering capacity and conductivity can be synthesized at any pH value along the pH 3-10 scale. They are effective in blocking electroendosmosis even when the delta pH on either side of the membrane is as high as 1.5 pH unit.     

A horizontal apparatus for isoelectric protein purification in a segmented immobilized pH gradient

A modification of the previously described apparatus (Faupel et al. (1987) J. Biochem. Biophys. Methods 15, 147-162), for recycling isoelectric focusing in a segmented immobilized pH gradient, is here reported. The most important improvements are: (1) a horizontal, vs. the previously vertical assembly; (2) a reduction of the thickness of the central flow chamber to 6 mm, vs. the previous 3 cm length and (3) the introduction, at both gel extremities of each Immobiline segment, of polypropylene filters, thus efficiently blocking the gel in situ. The advantages are: (i) the spontaneous removal of air bubbles, which in the vertical apparatus tend to accumulate in the ceiling of the flow chamber and to obstruct the flow of electric current; (ii) a more efficient hydraulic flow with a reduced chance of heating the liquid stream in the flow chamber, due to its reduced length along the separation path and (iii) a reduced risk of gel detachment from the tube walls, due to osmotic swelling caused by focused protein zones in the gel phase and by the fixed Immobiline charges in the polyacrylamide matrix.     

Focusing of pepsin in strongly acidic immobilized pH gradients

A new acrylamido buffer has been synthesized, for use in isoelectric focusing in immobilized pH gradients. This compound (2-acrylamido glycolic acid) has a pK = 3.1 (at 25 degrees C, 20 mM concentration during titration) and is used, by titration with the pK 9.3 Immobiline, to produce a linear pH gradient in the pH 2.5-3.5 interval. Pepsin (from pig stomach) focused in this acidic pH gradient is resolved into four components, two major (with pI values 2.76 and 2.78) and two minor (having pI values 2.89 and 2.90). This is the first time that such strongly acidic proteins could be focused in an immobilized pH gradient. Even in conventional isoelectric focusing in amphoteric buffers it has been impossible to focus reproducibly very-low-pI macromolecules.     

High-resolution two-dimensional electrophoresis with isoelectric focusing in immobilized pH gradients

Due to the high reproducibility of pH gradient slope and width, immobilized pH gradients (IPG) have been used as the first dimension of two-dimensional techniques in order to generate maps of constant spot position in the $\text{p}\text{M}{}_{\mathrm{<mtext>r</mtext>}}$. However, when coupling IPG to SDS (sodium dodecyl sulphate) gels two problems were encountered: vertical streaking, due to incomplete zone solubilization in SDS, and horizontal streaking, due to spot fusion along the pH axis caused by the electroendosmosis of the charged Immobiline gels. Two methodical modifications are herewith described to overcome these drawbacks: (a) the SDS equilibrium time of the first-dimension gel has been prolonged to at least 30 min; (b) the SDS electrophoresis gel has been cast together with a starting gel, containing 2.5 mM of each Immobiline species used in the first dimension, which serves as a transition from the charged to the uncharged gel.     

Protein desalting by isoelectric focusing in a segmented immobilized pH gradient

We have recently described an apparatus for protein purification based on a segmented Immobiline gel, having one or more liquid interlayers in between. The principle is entirely new, as it is based on keeping the protein of interest isoelectric, in a flow chamber, and focusing the impurities in an Immobiline gel. For this, a hydraulic flow is coupled orthogonally to an electric flow, sweeping away the non-isoelectric impurities from the recycling chamber. We now demonstrate that the present apparatus can be efficiently used for protein desalting. Hemoglobin A samples, containing 50 mM NaCl or 50 mM ammonium acetate, could be efficiently desalted in 2 h of recycling, after which the total salt content had decreased to less than 0.005 mM (a salt decrement of more than 10,000 fold the initial input). However, with polyprotic buffers (sulphate, citrate, phosphate, oligoamines) the desalting process was much slower, typically of the order of 20 h, possibly due to interaction of these species with the surrounding Immobiline matrix. In this last case, outside pH control (e.g. with a pH-stat) is necessary during protein purification, as, due to the faster removal of the monovalent counterion, the solution in the recycling chamber can become rather acidic or alkaline. It is demonstrated that the 2 extremities of the Immobiline segments facing the sample recycling chamber act indeed as isoelectric membranes, having a good buffering capacity, preventing the protein macroion from leaving the chamber by continuously titrating it to its isoelectric point.     

Role of intracellular buffering power on the mitochondria-cytosol pH gradient in the rat liver perfused at 4 degrees C

The factors regulating the amplitude and the pH gradient between cytosol and mitochondria (DeltapHmito-cyt) were investigated in the isolated rat liver perfused at 4 degrees C. Liver ATP content, pH, and buffering power of cytosolic and mitochondrial compartments were evaluated in situ using phosphorus-31 nuclear magnetic resonance spectroscopy. No DeltapHmito-cyt was detected in the liver perfused without bicarbonate. Permeant weak acid in the perfusate (H2CO3, 25 mM, or isobutyric acid, 25, 50, or 100 mM) acidified both cytosol and mitochondria and revealed a DeltapHmito-cyt from 0.06 to 0.31 pH unit. Nevertheless, the manipulations of the DeltapHmito-cyt were more effective under bicarbonate-free conditions, due to the absence of buffering by H2CO3/HCO-3. In the absence of bicarbonate, the intracellular buffering power was threefold higher in the mitochondria (110 mmol/pH unit at pHmito 7.16) than in the cytosol (44 mmol/pH unit at pHcyt 7.30) and dependent on the matrix and cytosol pH, respectively. These buffering powers were almost double in the presence of bicarbonate. In the bicarbonate-free perfused liver, the respiratory activity was 0.08 +/- 0.02 micromol O2/min. g liver wet weight and the ATP turnover was only 40 +/- 7 nmol/min. g liver wet weight, indicating the weak activity of liver mitochondria when DeltapHmito-cyt was <0.05 pH unit. The ATP turnover during a 50 mM isobutyric acid load was 35 +/- 4 nmol/min. g liver wet weight whereas DeltapHmito-cyt rose to 0.26 +/- 0.02 pH unit and pHmito remained alkaline. Hence, although DeltapHmito-cyt was increased the ATP turnover remained unchanged. This work is the first evaluation of the mitochondrial buffering power in the isolated liver. The DeltapHmito-cyt observed within various acid loads reflected the differential titration of cytosol and mitochondria containing proteins and H2CO3/HCO-3 buffering systems. Moreover, no direct relationship between DeltapHmito-cyt and ATP turnover could be shown.     

pK-matched running buffers for gel electrophoresis.

Electrophoresis through agarose and polyacrylamide-type gels is the standard method to separate, identify, and purify nucleic acids. Properties of electrophoresis buffers such as pH, ionic strength, and composition affect performance. The buffers in use contain a weak acid or weak base buffered by a compound with a dissimilar pK. Herein, three pK-matched buffers were developed, each containing two effective buffering components: one weak base and one weak acid which have similar pKa at 25 degrees C (within 0.3 pK units): (i) Ethanolamine/Capso, pH 9.6; (ii) triethanolamine/Tricine, pH 7.9; and (iii) Bis-Tris/Aces, pH 6.7. On agarose gels, the buffers in various concentrations were tested for separation of double-stranded DNA fragments with various DNA markers, agarose gel concentrations, and field strengths. Mobility was inversely proportional to the logarithm of molecular weight. The buffers provided high resolution without smearing at more dilute concentration than is possible with standard TAE (Tris/acetate, pH 8.0) or TBE (Tris/borate, pH 8.3) buffers. The buffers were also tested in 7 M urea denaturing LongRanger sequencing gels and in nondenaturing polyacrylamide SSCP gels. The pK-matched buffers provide good separation and high resolution, at a broad range of potential pH values. In comparison to TAE and TBE, pK-matched buffers provide higher voltage and current stability, lower working concentration, more concentrated stock solutions (up to 200x), and lower current per unit voltage, resulting in less heat generation.     

Proton stoichiometry in the reduction of the FAD and disulfide of Escherichia coli thioredoxin reductase. Evidence for a base at the active site

The oxidation-reduction midpoint potentials, Em, of the FAD and active site disulfide couples of Escherichia coli thioredoxin reductase have been determined from pH 5.5 to 8.5. The FAD and disulfide couples have similar Em values and thus a linked equilibrium of four microscopic enzyme oxidation-reduction states exists. The binding of phenylmercuric acetate to one enzyme form could be monitored which allowed solving the four microscopic Em values. The Em values at pH 7.0 and 12 degrees C of the four couples of thioredoxin reductase are: (S)2-enzyme-FAD/FADH2 = -0.243 V, (SH)2-enzyme-FAD/FADH2 = -0.260 V, (FAD)-enzyme-(S)2/(SH)2 = -0.254 V, and (FADH2)-enzyme-(S)2/(SH)2 = -0.271 V. Thus, at pH 7.0, the FAD and disulfide moieties have a 0.017-V negative interaction and Em values which are different by 0.011 V. The delta Em/delta pH of the FAD couples E2m and E3m are about 0.060 V/pH throughout the pH range studied, showing an approximately 2-proton stoichiometry of reduction of the enzyme FAD. The delta Em/delta pH of the disulfide couples E1m and E4m are about 0.052 V/pH from pH 5.5 to 8.5, showing an apparently nonintegral proton stoichiometry of reduction of 1.8 in this pH range. This proton stoichiometry suggests the presence of a base with an ionization behavior that is linked to the oxidation-reduction state of the disulfide. A novel method is presented for determining the pK values on oxidized and reduced enzyme which agrees with the less accurate classical method. The proton stoichiometry results are consistent with the presence of a thiol-base ion pair in which the pK of the base is elevated from 7.6 in disulfide containing enzyme to greater than 8.5 upon forming an ion pair with a thiol anion of pK 7.0 generated upon reduction of the disulfide. The fluorescence of the FAD in thioredoxin reductase decreases as the pH is lowered with a pK of 7.0, direct evidence for a base near the FAD probably distinct from the base interacting with the dithiol.     

Structure and oxidation-reduction behavior of 1-deaza-FMN flavodoxins: modulation of redox potentials in flavodoxins

Flavodoxins from Clostridium beijerinckii and from Megasphaera elsdenii with 1-carba-1-deaza-FMN substituted for FMN have been used to study flavin-protein interactions in flavodoxins. The oxidized 1-deaza analogue of FMN binds to apoflavodoxins from M. elsdenii and C. beijerinckii (a.k.a. Clostridium MP) with association constants (Ka) of 1.0 x 10(7) M-1 and 3.1 x 10(6) M-1, values about 10(2) less than the corresponding Ka values for FMN. X-ray structure analysis of oxidized 1-deaza-FMN flavodoxin from C. beijerinckii at 2.5-A resolution shows that the analogue binds with the flavin atoms in the same locations as their equivalents in FMN but that the protein moves in the vicinity of Gly 89 to accommodate the 1-CH group, undergoing displacements which increase the distance between position 1 of the flavin ring and the main-chain atoms of Gly 89 and move the peptide hydrogen of Gly 89 by about 0.6 A. The X-ray analysis implies that protonation of normal flavin at N(1), as would occur in formation of the neutral fully reduced species, would result in a similar structural perturbation. The oxidation-reduction potentials of 1-deaza-FMN flavodoxin from M. elsdenii have been determined in the pH range 4.5-9.2. The oxidized/semiquinone equilibrium (E'0 = -160 mV at pH 7.0) displays a pH dependence of -60 mV per pH unit; the semiquinone/reduced equilibrium (E'0 = -400 mV at pH 7.0) displays a pH dependence of -60 mV per pH unit at low pH and is pH independent at high pH, with a redox-linked pK of 7.4. Spectral changes of fully reduced 1-deaza-FMN flavodoxin with pH suggest that this latter pK corresponds to protonation of the flavin ring system (the pK of free reduced 1-deaza-FMN is 5.6 [Spencer, R., Fisher, J., & Walsh, C. (1977) Biochemistry 16, 3586-3593]. The pK of reduced 1-deaza-FMN flavodoxin provides an estimate of the electrostatic interaction between the protein and the bound prosthetic group; the free energy of binding neutral reduced 1-deaza-FMN is more negative than that for binding the anionic reduced 1-deaza-FMN by 2.4 kcal.(ABSTRACT TRUNCATED AT 250 WORDS)     

Yeast protein farnesyltransferase. pKas of peptide substrates bound as zinc thiolates.

Protein farnesyltransferase (PFTase) is a zinc metalloenzyme that catalyzes the posttranslational alkylation of the cysteine in C-terminal -Ca(1)a(2)X sequences by a 15-carbon farnesyl residue, where C is cysteine, a(1) and a(2) are normally aliphatic amino acids, and X is an amino acid that specifies selectivity for the farnesyl moiety. Formation of a Zn(2+) thiolate in the PFTase. peptide complex was detected by the appearance of an absorbance at 236 nm (epsilon = 15 000 M(-1) cm(-1)), which was dependent on the concentration of peptide, in a UV difference spectrum in a solution of PFTase and the peptide substrate RTRCVIA. We developed a fluorescence anisotropy binding assay to measure the dissociation constants as a function of pH for peptide analogues by appending a 2',7'-difluorofluorescein to their N-terminus. The electron-withdrawing fluorine atoms allowed us to measure peptide binding down to pH 5.5 without having to correct for the changes in fluorescence intensity that accompany protonation of the fluorophore. Measurements of the pK(a)s for thiol groups in free and bound peptide indicate that peptide binding is accompanied by formation of a zinc thiolate and that binding to PFTase lowers the pK of the peptide thiol by 3 units. In similar studies with the betaY310F mutant, the pK(a) of the thiol moiety was lowered by 2 units upon binding, indicating that the hydroxyl group in the conserved tyrosine helps stabilize the bound thiolate.     

pH measurements in ultranarrow immobilized pH gradients

It is possible to measure pH values in immobilized pH gradients (IPG) when the polyacrylamide matrix is made to contain an additional, carrier ampholyte-generated pH gradient. After an IPG run, 5 mm gel segments, along the separation axis, are cut and eluted in 300 microliter of 10 mM KCl and the pH read with a standard pH meter. When using ultranarrow pH gradients, larger gel segments (ca. 265 microliter) are eluted in 900 microliter of 100 mM KCl and the pH assessed with a differential pH meter. In the latter case, either internal or external standards are used as a reference, or starting point, to convert delta pH values into an actual pH curve. The reproducibility of the system is better than +/- 0.05 pH units, with a ca. 15% error over a 0.3 pH unit span. In ultranarrow pH gradients, it is imperative to use mixtures of all commercially available carrier ampholytes, so as to smoothen conductivity and buffering capacity gaps. By the present method, it is also possible to convert a wide (2-3 pH unit) carrier ampholyte interval into a narrow (0.2-0.3 pH unit) one.     

Diaphorase reactions of lipoamide dehydrogenases from the adrenal ketoglutarate dehydrogenase complex

Lipoamide dehydrogenase, a component of the bovine adrenal ketoglutarate dehydrogenase complex, catalyzes the oxidation of NADH by p-quinones and ferricyanide. The kinetics of oxidation obey the ping-pong mechanism. At pH 7.0, the constants for the active center oxidation by quinones (kox) are equal to 1.1 X 10(4)-5.3 X 10(5) M-1s-1 and increase as the acceptor potential rises. The values of kox for quinones change insignificantly within the pH range of 7.7-5.0, whereas that for ferricyanide increases 10-fold with a decrease of pH from 7.0 to 5.0. The value of the catalytic constant for the enzyme (kcat) reaches its maximum at pH 5.5. The quinones interact with the thiol groups of lipoamide dehydrogenase by inhibiting the fluorescence of FAD and diaphorease activity. The reaction is catalyzed by a basic amino acid (pK 6.7) within the composition of the enzyme.