Analysis of chromosome III replicators reveals an unusual structure for the ARS318 silencer origin and a conserved WTW sequence within the origin recognition complex binding site

Saccharomyces cerevisiae chromosome III encodes 11 autonomously replicating sequence (ARS) elements that function as chromosomal replicators. The essential 11-bp ARS consensus sequence (ACS) that binds the origin recognition complex (ORC) has been experimentally defined for most of these replicators but not for ARS318 (HMR-I), which is one of the HMR silencers. In this study, we performed a comprehensive linker scan analysis of ARS318. Unexpectedly, this replicator depends on a 9/11-bp match to the ACS that positions the ORC binding site only 6 bp away from an Abf1p binding site. Although a largely inactive replicator on the chromosome, ARS318 becomes active if the nearby HMR-E silencer is deleted. We also performed a multiple sequence alignment of confirmed replicators on chromosomes III, VI, and VII. This analysis revealed a highly conserved WTW motif 17 to 19 bp from the ACS that is functionally important and is apparent in the 228 phylogenetically conserved ARS elements among the six sensu stricto Saccharomyces species.     

Linear derivatives of Saccharomyces cerevisiae chromosome III can be maintained in the absence of autonomously replicating sequence elements

Replication origins in Saccharomyces cerevisiae are spaced at intervals of approximately 40 kb. However, both measurements of replication fork rate and studies of hypomorphic alleles of genes encoding replication initiation proteins suggest the question of whether replication origins are more closely spaced than should be required. We approached this question by systematically deleting replicators from chromosome III. The first significant increase in loss rate detected for the 315-kb full-length chromosome occurred only after all five efficient chromosomal replicators in the left two-thirds of the chromosome (ARS305, ARS306, ARS307, ARS309, and ARS310) had been deleted. The removal of the inefficient replicator ARS308 from this originless region caused little or no additional increase in loss rate. Chromosome fragmentations that removed the normally inactive replicators on the left end of the chromosome or the replicators distal to ARS310 on the right arm showed that both groups of replicators contribute significantly to the maintenance of the originless chromosome. Surprisingly, a 142-kb derivative of chromosome III, lacking all sequences that function as autonomously replicating sequence elements in plasmids, replicated and segregated properly 97% of the time. Both the replication initiation protein ORC and telomeres or a linear topology were required for the maintenance of chromosome fragments lacking replicators.     

Multiple DNA elements in ARS305 determine replication origin activity in a yeast chromosome.

A yeast autonomously replicating sequence, ARS305, shares essential components with a chromosome III replicator, ORI305. Known components include an ARS consensus sequence (ACS) element, presumed to bind the origin recognition complex (ORC), and a broad 3'-flanking sequence which contains a DNA unwinding element. Here linker substitution mutagenesis of ARS305 and analysis of plasmid mitotic stability identified three short sequence elements within the broad 3'-flanking sequence. The major functional element resides directly 3' of the ACS and the two remaining elements reside further downstream, all within non-conserved ARS sequences. To determine the contribution of the elements to replication origin function in the chromosome, selected linker mutations were transplaced into the ORI305 locus and two-dimensional gel electrophoresis was used to analyze replication bubble formation and fork directions. Mutation of the major functional element identified in the plasmid mitotic stability assay inactivated replication origin function in the chromosome. Mutation of each of the two remaining elements diminished both plasmid ARS and chromosomal origin activities to similar levels. Thus multiple DNA elements identified in the plasmid ARS are determinants of replication origin function in the natural context of the chromosome. Comparison with two other genetically defined chromosomal replicators reveals a conservation of functional elements known to bind ORC, but no two replicators are identical in the arrangement of elements downstream of ORC binding elements or in the extent of functional sequences adjacent to the ACS.     

Stability of recombinant plasmids containing the ars sequence of yeast extrachromosomal rDNA in several strains of Saccharomyces cerevisiae

The mitotic stabilities of hybrid plasmid Rcp21/11, which contains the replicator of yeast rDNA, have been compared for four yeast host strains of different origins. In two related strains, Saccharomyces cerevisiae A62-1G-P188 and 1A-P3812 from the Peterhof genetic stocks, the plasmid was much more stable than in strains DC5 and GRF18 from the USA stocks.The enhanced mitotic stability of Rcp21/11 in these two yeast strains is obviously attributable to a higher rate of integration of the plasmid into the chromosomal rDNA repeats of the hosts.The centromeric locus CEN3 was inserted into Rcp21/11 because it provides high mitotic and meiotic stability of plasmids with yeast replicators, due to an ordered distribution of plasmids throughout cell division. Using the new centromeric plasmid RcpCEN3, transformation of the four above-described yeast strains was carried out. It was found that, similarly to centromeric plasmids with other chromosomal replicators, RcpCEN3 remains in the cell as a single copy. In strains DC5, GRF18 and A62-1G-P188 the mitotic stability of RcpCEN3 was 20–50%, i.e., less than half that of plasmids containing locus CEN3 and other yeast repliiators, ars1, ars2 and the 2μ DNA replicator. The mitotic stability of RcpCEN3 in strains 1A-P3812 (from the Peterhof genetic stocks) for individual clones reached 85%, i.e. close to that of the other plasmids. Genetic analysis showed that the capacity of strain 1A-P3812 to stably retain RcpCEN3 has a recessive polygenic character. We suggest that the observed differences in mitotic stability of centromeric plasmid RcpCEN3 between various yeast strains reflects the differences in activity of rDNA replicator in these strains. The nature of extrachromosomal rDNA circles, found in some strains of S. cerevisiae, is discussed from the point of view of the data.     

Replicator dominance in a eukaryotic chromosome.

Replicators are genetic elements that control initiation at an origin of DNA replication (ori). They were first identified in the yeast Saccharomyces cerevisiae as autonomously replicating sequences (ARSs) that confer on a plasmid the ability to replicate in the S phase of the cell cycle. The DNA sequences required for ARS function on a plasmid have been defined, but because many sequences that participate in ARS activity are not components of chromosomal replicators, a mutational analysis of the ARS1 replicator located on chromosome IV of S. cerevisiae was performed. The results of this analysis indicate that four DNA elements (A, B1, B2 and B3) are either essential or important for ori activation in the chromosome. In a yeast strain containing two closely spaced and identical copies of the ARS1 replicator in the chromosome, only one is active. The mechanism of replicator repression requires the essential A element of the active replicator. This element is the binding site for the origin recognition complex (ORC), a putative initiator protein. The process that determines which replicator is used, however, depends entirely upon flanking DNA sequences.     

Chromosomal DNA replication initiates at the same origins in meiosis and mitosis.

Autonomously replicating sequence (ARS) elements are identified by their ability to promote high-frequency transformation and extrachromosomal replication of plasmids in the yeast Saccharomyces cerevisiae. Six of the 14 ARS elements present in a 200-kb region of Saccharomyces cerevisiae chromosome III are mitotic chromosomal replication origins. The unexpected observation that eight ARS elements do not function at detectable levels as chromosomal replication origins during mitotic growth suggested that these ARS elements may function as chromosomal origins during premeiotic S phase. Two-dimensional agarose gel electrophoresis was used to map premeiotic replication origins in a 100-kb segment of chromosome III between HML and CEN3. The pattern of origin usage in premeiotic S phase was identical to that in mitotic S phase, with the possible exception of ARS308, which is an inefficient mitotic origin associated with CEN3. CEN3 was found to replicate during premeiotic S phase, demonstrating that the failure of sister chromatids to disjoin during the meiosis I division is not due to unreplicated centromeres. No origins were found in the DNA fragments without ARS function. Thus, in both mitosis and meiosis, chromosomal replication origins are coincident with ARS elements but not all ARS elements have chromosomal origin function. The efficiency of origin use and the patterns of replication termination are similar in meiosis and in mitosis. DNA replication termination occurs over a broad distance between active origins.     

Chl1 and Ctf4 are required for damage-induced recombinations

Deletion mutants of CHL1 or CTF4, which are required for sister chromatid cohesion, showed higher sensitivity to the DNA damaging agents methyl methanesulfonate (MMS), hydroxyurea (HU), phleomycin, and camptothecin, similar to the phenotype of mutants of RAD52, which is essential for recombination repair. The levels of Chl1 and Ctf4 associated with chromatin increased considerably after exposure of the cells to MMS and phleomycin. Although the activation of DNA damage checkpoint did not affected in chl1 and ctf4 mutants, the repair of damaged chromosome was inefficient, suggesting that Chl1 and Ctf4 act in DNA repair. In addition, MMS-induced sister chromatid recombination in haploid cells, and, more importantly, MMS-induced recombination between homologous chromosomes in diploid cells were impaired in these mutants. Our results suggest that Chl1 and Ctf4 are directly involved in homologous recombination repair rather than acting indirectly via the establishment of sister chromatid cohesion.     

The CHL 1 (CTF 1) gene product of Saccharomyces cerevisiae is important for chromosome transmission and normal cell cycle progression in G2/M.

We have analyzed the CTF1 gene, identified in a screen for mutants with decreased chromosome transmission fidelity and shown to correspond to the previously identified chl1 mutation. Chl1 null mutants exhibited a 200-fold increase in the rate of chromosome III missegregation per cell division, and near wild-type rates of marker homozygosis on this chromosome by mitotic recombination. Analysis of the segregation of a marker chromosome indicated that sister chromatid loss (1:0 segregation) and sister chromatid non-disjunction (2:0 segregation) contributed equally to chromosome missegregation. A genomic clone of CHL1 was isolated and used to map its physical position on chromosome XVI. Nucleotide sequence analysis of CHL1 revealed a 2.6 kb open reading frame with a 99 kd predicted protein sequence that contained two PEST sequences and was 23% identical to the coding region of a nucleotide excision repair gene, RAD3. Domains of homology between these two predicted protein sequences included a helix-turn-helix motif and an ATP binding site containing a helicase consensus. Mutants lacking the CHL1 gene product are viable and display two striking, and perhaps interrelated, phenotypes: extreme chromosome instability and a delay in cell cycle progression in G2/M. This delay is independent of the cell cycle checkpoint that requires the function of the RAD9 gene.     

Genetic analysis of the mitotic transmission of minichromosomes

The fidelity of the mitotic transmission of minichromosomes in S. cerevisiae is monitored by a novel visual assay that allows one to detect changes in plasmid copy number in individual mitotic divisions. This assay is used to investigate the mitotic transmission of a plasmid containing a putative yeast origin of replication (ARS 1) and a centromere (CEN3). The rate of improper segregation for the minichromosome is 200-fold higher than observed for a normal chromosome. However, the replication of the minichromosome is stringently controlled; it overreplicates less than once per one thousand mitotic divisions. We also use this assay to isolate and characterize mutations in ARS 1 and CEN3. The mutations in ARS 1 define a new domain required for its optimal activity, and the mutations in CEN3 suggest that the integrity of element II is not essential for centromere function. Finally, the phenotypes of the mutations in ARS 1 and CEN3 are consistent with their function in replication and segregation, respectively.     

Mutational Analysis of Meiotic and Mitotic Centromere Function in Saccharomyces cerevisiae

A centromere (CEN) in Saccharomyces cerevisiae consists of approximately 150 bp of DNA and contains 3 conserved sequence elements: a high A + T region 78-86 bp in length (element II), flanked on the left by a conserved 8-bp element I sequence (PuTCACPuTG), and on the right by a conserved 25-bp element III sequence. We have carried out a structure-function analysis of the element I and II regions of CEN3 by constructing mutations in these sequences and subsequently determining their effect on mitotic and meiotic chromosome segregation. We have also examined the mitotic and meiotic segregation behavior of ARS plasmids containing the structurally altered CEN3 sequences. Replacing the periodic tracts of A residues within element II with random A + T sequences of equal length increases the frequency of mitotic chromosome nondisjunction only 4-fold; whereas, reducing the A + T content of element II while preserving the length results in a 40-fold increase in the frequence of chromosome nondisjunction. Structural alterations in the element II region that do not decrease the overall length have little effect on the meiotic segregation behavior of the altered chromosomes. Centromeres containing a deletion of element I or a portion of element II retain considerable mitotic activity, yet plasmids carrying these same mutations segregate randomly during meiosis I, indicating these sequences to be essential for maintaining attachment of the replicated sister chromatids during the first meiotic division. The presence of an intact element I sequence properly spaced from the element III region is absolutely essential for proper meiotic function of the centromere.     

Identification and Cloning of the Chl4 Gene Controlling Chromosome Segregation in Yeast

A collection of chl mutants characterized by decreased fidelity of chromosome transmission and by minichromosome nondisjunction in mitosis was examined for the ability to maintain nonessential dicentric plasmids. In one of the seven mutants analyzed, chl4, dicentric plasmids did not depress cell division. Moreover, nonessential dicentric plasmids were maintained stably without any rearrangements during many generations in the chl4 mutant. The rate of mitotic heteroallelic recombination in the chl4 mutant was not increased compared to that in an isogenic wild-type strain. Analysis of the segregation of a marked chromosome indicated that sister chromatid nondisjunction and sister chromatid loss contributed equally to chromosome malsegregation in the chl4 mutant. A genomic clone of CHL4 was isolated by complementation of the chl4-1 mutation and was physically mapped to the right arm of chromosome IV near the SUP2 gene. Nucleotide sequence analysis of CHL4 clone revealed a 1.4-kb open reading frame coding for a 53-kD predicted protein which does not have homology to published proteins. A strain containing a null allele of CHL4 is viable under standard growth conditions but has a temperature-sensitive phenotype (conditional lethality at 36°). We suggest that the CHL4 gene is required for kinetochore function in the yeast Saccharomyces cerevisiae.     

Differential targeting of Tetrahymena ORC to ribosomal DNA and non‐rDNA replication origins

The Tetrahymena thermophila origin recognition complex (ORC) contains an integral RNA subunit, 26T RNA, which confers specificity to the amplified ribosomal DNA (rDNA) origin by base pairing with an essential cis‐acting replication determinant—the type I element. Using a plasmid maintenance assay, we identified a 6.7 kb non‐rDNA fragment containing two closely associated replicators, ARS1‐A (0.8 kb) and ARS1‐B (1.2 kb). Both replicators lack type I elements and hence complementarity to 26T RNA, suggesting that ORC is recruited to these sites by an RNA‐independent mechanism. Consistent with this prediction, although ORC associated exclusively with origin sequences in the 21 kb rDNA minichromosome, the interaction between ORC and the non‐rDNA ARS1 chromosome changed across the cell cycle. In G₂ phase, ORC bound to all tested sequences in a 60 kb interval spanning ARS1‐A/B. Remarkably, ORC and Mcm6 associated with just the ARS1‐A replicator in G₁ phase when pre‐replicative complexes assemble. We propose that ORC is stochastically deposited onto newly replicated non‐rDNA chromosomes and subsequently targeted to preferred initiation sites prior to the next S phase.     

Functional conservation of multiple elements in yeast chromosomal replicators.

Replicators that control the initiation of DNA replication in the chromosomes of Saccharomyces cerevisiae retain their function when cloned into plasmids, where they are commonly referred to as autonomously replicating sequences (ARSs). Previous studies of the structure of ARS1 in both plasmid and chromosome contexts have shown that it contains one essential DNA element, A, that includes a match to the ARS consensus sequence (ACS), and three additional elements, B1, B2, and B3, that are also important for ARS function. Elements A and B3 are bound by a candidate initiator protein called the origin recognition complex and ARS-binding factor 1, respectively. Although the A and B3 elements have been found in other ARSs, sequence comparisons among ARSs have failed to identify B1- and B2-like elements. To assess the generality of the modular nature of yeast replicators, linker substitution mutagenesis of another yeast chromosomal replicator, ARS307, was performed. Three DNA sequence elements were identified in ARS307, and they were demonstrated to be functionally equivalent to the A, B1, and B2 elements present in ARS1. Despite the lack of DNA sequence similarity, the B1 and B2 elements at each ARS were functionally conserved. Single-base substitutions in the core of the ARS1 B1 and B2 elements identified critical nucleotides required for the function of the B1 element. In contrast, no single-point mutations were found to affect B2 function. The results suggest that multiple DNA sequence elements might be a general and conserved feature of replicator sequences in S. cerevisiae.     

Identification of mutations that decrease the stability of a fragment of Saccharomyces cerevisiae chromosome III lacking efficient replicators

Eukaryotic chromosomes are duplicated during S phase and transmitted to progeny during mitosis with high fidelity. Chromosome duplication is controlled at the level of replication initiation, which occurs at cis-acting replicator sequences that are spaced at intervals of approximately 40 kb along the chromosomes of the budding yeast Saccharomyces cerevisiae. Surprisingly, we found that derivatives of yeast chromosome III that lack known replicators were replicated and segregated properly in at least 96% of cell divisions. To gain insight into the mechanisms that maintain these "originless" chromosome fragments, we screened for mutants defective in the maintenance of an "originless" chromosome fragment, but proficient in the maintenance of the same fragment that carries its normal complement of replicators (originless fragment maintenance mutants, or ofm). We show that three of these Ofm mutations appear to disrupt different processes involved in chromosome transmission. The OFM1-1 mutant seems to disrupt an alternative initiation mechanism, and the ofm6 mutant appears to be defective in replication fork progression. ofm14 is an allele of RAD9, which is required for the activation of the DNA damage checkpoint, suggesting that this checkpoint plays a key role in the maintenance of the "originless" fragment.     

Stimulation of Meiotic Recombination in Yeast by an Ars Element

In a previous study, meiotic recombination events were monitored in the 22-kb LEU2 to CEN3 region of chromosome III of Saccharomyces cerevisiae. One region (the hotspot) was shown to have an enhanced level of both gene conversion events and reciprocal crossovers, whereas a second region (the coldspot) was shown to have a depressed level of both types of recombination events. In this study we have analyzed the effects of a replication origin, ARS307, located about 2 kb centromere proximal to the hotspot region, on the distribution of meiotic recombination events. We find that a deletion of this origin results in a reduction of both gene conversions and reciprocal crossovers in the hotspot region, and that a 200-bp fragment of this ARS element can stimulate both types of recombination events when relocated to the coldspot region. Although the magnitude of stimulation of these events is similar in both orientations, whether the ARS is functional or not, the distribution of events is dependent upon the orientation of the element.     

The causes of instability of artificial mini-chromosomes in yeasts mutant for chl genes

In mutants chl2, chl3, chl5, and chl6, which control mitotic chromosome transmission, the behaviour of the centromeric plasmids with various genes was analyzed. The main cause of chromosome instability in chl2, chl5, and chl6 is chromosome loss during cell division (1:0 segregation). The main cause of chromosome instability in chl3. is nondisjunction (2:0 segregation). According to this, the chl3 mutant, but not other chl's, cannot maintain the mini-chromosome with SUP11 gene. This gene causes cell death in high copy number. Chromosome nondisjunction in chl3 is also confirmed by the data on the mini-chromosome carrying CUP1 gene responsible for copper-resistance in yeast. The copper resistancy level in chl3 transformants is much higher than in chl5 or wild type transformants. Elevated copper resistance of chl3 transformants is caused by the transit accumulation of CUP1-carrying mini-chromosome in part of the cell population as a result of segregation mistakes upon cell divisions. Thus, the CHL3 gene is a new gene that controls the process of mitotic chromosome disjunction in yeast.     

Altered Fidelity of Mitotic Chromosome Transmission in Cell Cycle Mutants of S. CEREVISIAE

Thirteen of 14 temperature-sensitive mutants deficient in successive steps of mitotic chromosome transmission (cdc2, 4, 5, 6, 7, 8, 9, 13, 14, 15, 16, 17 and 20) from spindle pole body separation to a late stage of nuclear division exhibited a dramatic increase in the frequency of chromosome loss and/or mitotic recombination when they were grown at their maximum permissive temperatures. The increase in chromosome loss and/or recombination is likely to be due to the deficiency of functional gene product rather than to an aberrant function of the mutant gene product since the mutant alleles are, with one exception, recessive to the wild-type allele for this phenotype. The generality of this result suggests that a delay in almost any stage of chromosome replication or segregation leads to a decrease in the fidelity of mitotic chromosome transmission. In contrast, temperature-sensitive mutants defective in the control step of the cell cycle (cdc28), in cytokinesis (cdc3) or in protein synthesis (ils1) did not exhibit increased recombination or chromosome loss.--Based upon previous results with mutants and DNA-damaging agents in a variety of organisms, we suggest that the induction of mitotic recombination in certain mutants is due to the action of a repair pathway upon nicks or gaps left in the DNA. This interpretation is supported by the fact that the induced recombination is dependent upon the RAD52 gene product, as essential component in the recombinogenic DNA repair pathway. Gene products whose deficiency leads to induced recombination are, therefore, strong candidates for proteins that function in DNA metabolism. Among the mutants that induce recombination are those known to be defective in some aspect of DNA replication (cdc2, 6, 8, 9) as well as some mutants defective in the G2 (cdc13 and 17) and M (cdc5 and 14) phases of the mitotic cycle. We suggest that special aspects of DNA metabolism may be occurring in G2 and M in order to prepare the chromosomes for proper segregation.     

Structure and sequence of the centromeric DNA of chromosome 4 in Saccharomyces cerevisiae.

The CEN4 sequences from chromosome 4 that impart mitotic stability to autonomously replicating (ARS) plasmids in yeast cells have been localized to a 1,755-base-pair (bp) fragment. This fragment could be cut in half to give two adjacent, nonoverlapping fragments, that each contained some mitotic stabilization sequences. One of the half-fragments worked as efficiently as the larger fragment from which it was derived, while the other half provided a much poorer degree of mitotic stabilization. Sequencing of 2,095 bp of DNA including this region revealed the presence of a centromere consensus sequence, elements I, II, and III (M. Fitzgerald-Hayes, L. Clarke, and J. Carbon, Cell 29:235-244, 1982), in the half-fragment providing high levels of mitotic stability. The poorly stabilizing half-fragment did not contain any obvious sequence homologies to other centromere sequences. Deletion analysis of the 1,755-bp fragment indicated that removal of the 14-bp element I plus 16 of the 82 bp of element II impaired mitotic stability. Removal of elements I and II eliminated the mitotic stability provided by the consensus sequence.     

Differential kinetochore protein requirements for establishment versus propagation of centromere activity in Saccharomyces cerevisiae

Dicentric chromosomes undergo a breakage-fusion-bridge cycle as a consequence of having two centromeres on the same chromatid attach to opposite spindle poles in mitosis. Suppression of dicentric chromosome breakage reflects loss of kinetochore function at the kinetochore-microtubule or the kinetochore-DNA interface. Using a conditionally functional dicentric chromosome in vivo, we demonstrate that kinetochore mutants exhibit quantitative differences in their degree of chromosome breakage. Mutations in chl4/mcm17/ctf17 segregate dicentric chromosomes through successive cell divisions without breakage, indicating that only one of the two centromeres is functional. Centromere DNA introduced into the cell is unable to promote kinetochore assembly in the absence of CHL4. In contrast, established centromeres retain their segregation capacity for greater than 25 generations after depletion of Chl4p. The persistent mitotic stability of established centromeres reveals the presence of an epigenetic component in kinetochore segregation. Furthermore, this study identifies Chl4p in the initiation and specification of a heritable chromatin state.