Dissolution improvement of high drug-loaded solid dispersion

This study focused on an investigation of a high drug-loaded solid dispersion system consisting of drug, carrier, and surfactant. Solid dispersions of a water-insoluble ofloxacin (OFX) with polyethylene glycol (PEG) of different molecular weights, namely binary solid dispersion systems, were prepared at drug to carrier not less than 5∶5. Polysorbate 80, a nonionic surfactant, was incorporated into the binary solid dispersion systems as the third component to obtain the ternary solid dispersion systems. The powder x-ray diffraction and differential scanning calorimetric studies indicated that crystalline OFX existed in the solid dispersions with high drug loading. However, a decreased crystallinity of the solid dispersions obtained revealed that a portion of OFX was in an amorphous state. The results indicated a remarkably improved dissolution of drug from the ternary solid dispersion systems when compared with the binary solid dispersion systems. This was because of polysorbate 80, which improved wettability and solubilized the non-molecularly dispersed or crystalline fraction of OFX.     

Solid-State Characterization and Dissolution Properties of Meloxicam–Moringa Coagulant–PVP Ternary Solid Dispersions

The effect of ternary solid dispersions of poor water-soluble NSAID meloxicam with moringa coagulant (obtained by salt extraction of moringa seeds) and polyvinylpyrrolidone on the in vitro dissolution properties has been investigated. Binary (meloxicam–moringa and meloxicam–polyvinylpyrrolidone (PVP)) and ternary (meloxicam–moringa–PVP) systems were prepared by physical kneading and ball milling and characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffractometry. The in vitro dissolution behavior of meloxicam from the different products was evaluated by means of United States Pharmacopeia type II dissolution apparatus. The results of solid-state studies indicated the presence of strong interactions between meloxicam, moringa, and PVP which were of totally amorphous nature. All ternary combinations were significantly more effective than the corresponding binary systems in improving the dissolution rate of meloxicam. The best performance in this respect was given by the ternary combination employing meloxicam–moringa–PVP ratio of [1:(3:1)] prepared by ball milling, with about six times increase in percent dissolution rate, whereas meloxicam–moringa (1:3) and meloxicam–PVP (1:4) prepared by ball milling improved dissolution of meloxicam by almost 3- and 2.5-folds, respectively. The achieved excellent dissolution enhancement of meloxicam in the ternary systems was attributed to the combined effects of impartation of hydrophilic characteristic by PVP, as well as to the synergistic interaction between moringa and PVP.     

Formulation of Sustained-Release Dosage Form of Verapamil Hydrochloride by Solid Dispersion Technique Using Eudragit RLPO or Kollidon®SR

The release of verapamil hydrochloride from tablets with Eudragit RLPO or Kollidon®SR with different drug-to-polymer ratios were investigated with a view to develop twice-daily sustained-release dosage form by solid dispersion (SD) technique. The SDs containing Eudragit RLPO or Kollidon®SR at drug-polymer ratios of 1:1, 1:2, and 1:3 with verapamil hydrochloride were developed using solvent evaporation technique. The physical mixtures of drug and both polymers were prepared by using simple mixing technique at the same ratio as solid dispersion. The physicochemical properties of solid dispersion were evaluated by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The study of DSC, XRD, and FTIR could not show significant interaction between verapamil HCl and Kollidon®SR or Eudragit RLPO. The solid dispersions or physical mixtures were compressed to tablets. The tablets were prepared with solid dispersions containing Eudragit RLPO or Kollidon®SR, with all the official requirements of tablet dosage forms fulfilled. Tablets prepared were evaluated for the release of verapamil hydrochloride over a period of 12 h in pH 6.8 phosphate buffer using US Pharmacopoeia type II dissolution apparatus. The in vitro drug release study revealed that the tablet containing Eudragit has extended the release rate for 12 h whereas the tablet containing Kollidon®SR at the same concentration has extended the release rate up to 8 h. The in vitro release profile and the mathematical models indicate that release of verapamil hydrochloride can be effectively controlled from a tablet containing solid dispersions of Eudragit RLPO. The reduction of size fraction of the SD system from 200–250 to 75–125 μm had a great effect on the drug release.     

Microparticles Containing Curcumin Solid Dispersion: Stability,Bioavailability and Anti-Inflammatory Activity

This work aimed at improving the solubility of curcumin by the preparation of spray-dried ternary solid dispersions containing Gelucire®50/13-Aerosil® and quantifying the resulting in vivo oral bioavailability and anti-inflammatory activity. The solid dispersion containing 40% of curcumin was characterised by calorimetry, infrared spectroscopy and X-ray powder diffraction. The solubility and dissolution rate of curcumin in aqueous HCl or phosphate buffer improved up to 3600- and 7.3-fold, respectively. Accelerated stability test demonstrated that the solid dispersion was stable for 9 months. The pharmacokinetic study showed a 5.5-fold increase in curcumin in rat blood plasma when compared to unprocessed curcumin. The solid dispersion also provided enhanced anti-inflammatory activity in rat paw oedema. Finally, the solid dispersion proposed here is a promising way to enhance curcumin bioavailability at an industrial pharmaceutical perspective, since its preparation applies the spray drying, which is an easy to scale up technique. The findings herein stimulate further in vivo evaluations and clinical tests as a cancer and Alzheimer chemoprevention agent.     

Physicochemical Investigations and Stability Studies of Amorphous Gliclazide

Gliclazide (GLI), a poorly water-soluble antidiabetic, was transformed into a glassy state by melt quench technique in order to improve its physicochemical properties. Chemical stability of GLI during formation of glass was assessed by monitoring thin-layer chromatography, and an existence of amorphous form was confirmed by differential scanning calorimetry and X-ray powder diffractometry. The glass transition occurred at 67.5°C. The amorphous material thus generated was examined for its in vitro dissolution performance in phosphate buffer (pH 6.8). Surprisingly, amorphous GLI did not perform well and was unable to improve the dissolution characteristics compared to pure drug over entire period of dissolution studies. These unexpected results might be due to the formation of a cohesive supercooled liquid state and structural relaxation of amorphous form toward the supercooled liquid region which indicated functional inability of amorphous GLI from stability point of view. Hence, stabilization of amorphous GLI was attempted by elevation of T_g via formation of solid dispersion systems involving comprehensive antiplasticizing as well as surface adsorption mechanisms. The binary and ternary amorphous dispersions prepared with polyvinylpyrrolidone K30 (as antiplasticizer for elevation of T_g) and Aerosil 200® and/or Sylysia® 350 (as adsorbent) in the ratio of 1:1:1 (w/w) using kneading and spray-drying techniques demonstrated significant enhancement in rate and extent of dissolution of drug initially. During accelerated stability studies, ternary systems showed no significant reduction in drug dissolution performance over a period of 3 months indicating excellent stabilization of amorphous GLI.Key words: amorphous, gliclazide, solid dispersion, stability studies, T_g     

Investigation of molecular dissolution mechanism of ketoprofen binary and ternary solid dispersions by molecular dynamics simulations

Abstract

The research aimed to investigate the molecular dissolution mechanism of both binary and ternary solid dispersions by molecular dynamics simulations. The simulation results indicated that the drug molecules were much easier to be released from surfactant-containing ternary systems than from binary ones. Moreover, sodium dodecyl sulfate as an additive in ternary systems had better effects than Tween 60. The simulation results were in well agreement with the experimental results. This research presented a reasonable explanation of molecular dissolution mechanism for both binary and ternary solid dispersions, which may benefit the future development of solid dispersion formulations.     

Effect of N-trimethyl chitosan enhancing the dissolution properties of the lipophilic drug cyclosporin A

The aim was to evaluate the influence of N-trimethyl chitosan chloride (TMC) as a carrier for solid dispersion on the dissolution of poorly water-soluble drugs. In this study, we used cyclosporin A(CyA) as a model drug and TMC as a carrier. The effect of various formulation and process variables including TMC-to-CyA mixing weight ratio, weigh molecular(M_w) of TMC and methods used to disperse CyA along with the TMC on the drug dissolution was investigated. The nature of CyA dispersed in the matrix was studied by powder X-ray diffractometry (PXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and dissolution rate analyses. It was proved that all solid mixtures of CyA with TMCs showed a significantly rapid dissolution rate compared to pure drug and physical mixture. The greater the TMC content the higher the drug dissolution was, up to a maximum corresponding to a polymer: drug ratio of 3:1. The lower the M_w of TMC, the more important the polymer effect was. The dissolution of CyA was remarkably improved by the solid dispersion. The drug dissolution enhancement was attributed to the decreased drug crystallinity and size and polymer wetting effect. There was no significant difference in the efficiency of improving the drug dissolution between the solid dispersions prepared by solvent dispersing and by co-grinding. It was suggested that the TMC with a lower molecular weight is a useful carrier for solid dispersion.     

The Development of Self-nanoemulsifying Liquisolid Tablets to Improve the Dissolution of Simvastatin

The aim of this work was to develop self-nanoemulsifying liquisolid tablets (SNELT) to enhance the dissolution profile of poorly water-soluble simvastatin. SNELT present a unique technique of incorporating self-nanoemulsifying drug delivery systems (SNEDDS) into tablets. Optimized SNEDDS containing different oils, Cremophor^® RH 40 (surfactant) and Transcutol^® HP (co-surfactant), at different ratios, were used as liquid vehicles and loaded on carrier material, microcrystalline cellulose (MCC), and coating material, Cab-o-sil^® H-5 (nanosize colloidal silicon dioxide) powders at different loading factors (L _f ) and fixed excipient ratio (R?=?20). The effect of using different carrier materials, granulated mannitol, crystalline mannitol, and maltodextrin with MCC at different ratios, and different coating materials, Aeroperl^® 300 (granulated silicon dioxide) at different excipient ratios (R), was also emphasized. Liquisolid powders with acceptable flowability, compressibility, and tablet weight were compressed into tablets. Results revealed that powders with L _f ?=?0.2 possessed the most preferable properties to be tableted. SNELT with MCC and Cab-o-sil^® H-5 were able to generate nanoemulsions and to enhance the cumulative percent of drug dissolved at 60 min significantly to reach up to 90%. Furthermore, using carrier material (granulated mannitol/MCC at ratio 3:1) enabled SNELT to disperse into nanoemulsion (Z-average?=?25.7 nm) and improved the dissolution profile significantly to reach 99% at 60 min. Cab-o-sil^® H-5 proved to be a better coating material compared to Aeroperl^® 300. In conclusion, developed SNELT were promising in enhancing in vitro dissolution of simvastatin and excipients highly affect SNELT’s performance.     

Improved dissolution of oleanolic acid with ternary solid dispersions

The purpose of this study was to enhance the dissolution of oleanolic acid by solid dispersions consisting of the drug, a polymeric carrier, and a surfactant. Binary solid dispersions consisting of oleanolic acid and polyvinylpyrrolidone were prepared for comparison. Polysorbate 80, a nonionic surfactant, was incorporated into binary solid dispersions as the third component to prepare ternary solid dispersions. Solid dispersions were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, and dissolution tests. The crystallinization of OA was prohibited in solid dispersions. Both the binary and ternary solid dispersions enhanced the dissolution of OA. Moreover, the dissolution of ternary solid dispersion was faster compared with that of binary solid dispersion. Polysorbate 80 played an important positive role in dissolution of the solid dispersion.     

Influence of Formulation Factors on Tablet Formulations with Liquid Permeation Enhancer Using Factorial Design

For a drug with low bioavailability, a matrix tablet with liquid permeation enhancer (Labrasol®) was formulated. Factorial design was used to evaluate the effect of three formulation factors: drug percentage, polymer type (Methocel® K100M or Eudragit® L 100-55), and tablet binder percentage (Plasdone® S-630) on tablet characteristics. Tablets were prepared by direct compression and characterized. Compressibility index values ranged between 15.90% and 29.87% and tablet hardness values from 7.8 to 29.78 Kp. Eudragit®-containing formulations had better compressibility index values with higher tablet hardness. Time for 75% of drug release (T ₇₅) was calculated, and formulations containing Eudragit® L 100-55 had faster release rates than tablet formulations with Methocel® K100M. Formulations with Methocel® K100M fit well in the Higuchi model as indicated by their R ² values (>0.98). Among all the formulation factors studied, polymer type displayed the highest and statistically significant effect on compressibility index, tablet hardness, and dissolution rate. Statistical design helped in better understanding the effect of formulation factors on tablet characteristics important for designing formulations with desired characteristics.     

Process optimization and characterization of poloxamer solid dispersions of a poorly water-soluble drug

The objective of the present investigation was to improve the dissolution rate of Rofecoxib (RXB), a poorly water-soluble drug by solid dispersion technique using a water-soluble carrier, Poloxamer 188 (PXM). The melting method was used to prepare solid dispersions. A 3² full factorial design approach was used for optimization wherein the temperature to which the melt-drug mixture cooled (X ₁) and the drug-to-polymer ratio (X ₂) were selected as independent variables and the time required for 90% drug dissolution (t₉₀) was selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of RXB from PXM solid dispersions, a low level ofX ₁ and a high level ofX ₂ were suitable. The differential scanning calorimetry and x-ray diffraction studies demonstrated that enhanced dissolution of RXB from solid dispersion might be due to a decrease in the crystallinity of RXB and PXM and dissolution of RXB in molten PXM during solid dispersion preparation. In conclusion, dissolution enhancement of RXB was obtained by preparing its solid dispersions in PXM using melting technique. The use of a factorial design approach helped in identifying the critical factors in the preparation and formulation of solid dispersion. Published: April 13, 2007     

Application of Pharmaceutical QbD for Enhancement of the Solubility and Dissolution of a Class II BCS Drug using Polymeric Surfactants and Crystallization Inhibitors: Development of Controlled-Release Tablets

The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the critical quality attributes of the FSMs were identified. Box–Behnken experimental design was applied to develop space design and determine the control space of FSMs that have maximum solubility, maximum dissolution, and ability to inhibit felodipine crystallization from supersaturated solution. Material attributes and CPP studied were the amount of hydroxypropyl methylcellulose (HPMC; X ₁), amount of polymeric surfactants Inutec®SP1 (X ₂), amount of Pluronic®F-127 (X ₃) and preparation techniques, physical mixture (PM) or solvent evaporation (SE; X ₄). There is no proposed design space formed if the Pluronic® content was below 45.1 mg and if PM is used as the preparation technique. The operating ranges, for robust development of FSM of desired quality, of Pluronic®, Inutec®SP1, HPMC, and preparation technique, are 49–50, 16–23, 83–100 mg, and SE, respectively. The calculated value of f2 was 56.85, indicating that the release profile of the controlled-release (CR) tablet (CR-6) containing the optimized in situ-formed FSM was similar to that of the target release profile. Not only did the ternary mixture of Pluronic®, HPMC with Inutec®SP1 enhance the dissolution rate and inhibit crystallization of felodipine, but also they aided Carbopol®974 in controlling felodipine release from the tablet matrix. It could be concluded that a promising once-daily CR tablets of felodipine was successfully designed using QbD approach.     

Effect of Auxiliary Substances on Complexation Efficiency and Intrinsic Dissolution Rate of Gemfibrozil–β-CD Complexes

The studies reported in this work are aimed to elucidate the ternary inclusion complex formation of gemfibrozil (GFZ), a poorly water-soluble drug, with β-cyclodextrin (β-CD) with the aid of auxiliary substances like different grades of povidone(s) (viz. PVP K-29/32, PVP K-40, Plasdone S-630, and Polyplasdone XL), organic base (viz. triethanolamine), and metal ion (viz. MgCl₂·6H₂O), by investigating their interactions in solution and solid state. Phase solubility studies were carried out to evaluate the solubilizing power of β-cyclodextrin, in association with various auxiliary substances, to determine the apparent stability constant (K _C) and complexation efficiency (CE) of complexes. Improvement in K _C values for ternary complexes clearly proves the benefit of the addition of auxiliary substances to promote CE. Of all the approaches used, the use of polymer Plasdone S-630 was found to be the most promising approach in terms of optimum CE and K _C. GFZ–β-CD (1:1) binary and ternary systems were prepared by kneading and lyophilization methods. The ternary systems clearly signified superiority over binary systems in terms of CE, solubility, K _C, and reduction in the formulation bulk. Optimized ternary system of GFZ–β-CD–Plasdone S-630 prepared by using lyophilization method indicated a significant improvement in intrinsic dissolution rate when compared with ternary kneaded system. Differential scanning calorimetry, X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and proton nuclear magnetic resonance were carried out to characterize the binary and optimized ternary complex. The results suggested the formation of new solid phases, eliciting strong evidences of ternary inclusion complex formation between GFZ, β-CD, and Plasdone S-630, particularly for lyophilized products.     

Self-Nanoemulsifying Drug Delivery System of Nifedipine: Impact of Hydrophilic–Lipophilic Balance and Molecular Structure of Mixed Surfactants

A simple but novel mixed surfactant system was designed to fabricate a self-nanoemulsifying drug delivery system (SNEDDS) based on hydrophilic–lipophilic balance (HLB) value. The impacts of HLB and molecular structure of surfactants on the formation of SNEDDS were investigated. After screening various oils and surfactants, nifedipine (NDP)-loaded liquid SNEDDS was formulated with Imwitor^® 742 as oil and Tween^®/Span^® or Cremophor^®/Span^® as mixed surfactant. Droplet size of the emulsions obtained after dispersing SNEDDS containing Tween^®/Span^® in aqueous medium was independent of the HLB of a mixed surfactant. The use of the Cremophor^®/Span^® blend gave nanosized emulsion at higher HLB. The structure of the surfactant was found to influence the emulsion droplet size. Solid SNEDDS was then prepared by adsorbing NDP-loaded liquid SNEDDS comprising Cremophor^® RH40/Span^® 80 onto Aerosil^® 200 or Aerosil^® R972 as inert solid carrier. Solid SNEDDS formulations using higher amounts (30–50% w/w) of Aerosil^® 200 exhibited good flow properties with smooth surface and preserved the self-emulsifying properties of liquid SNEDDS. Differential scanning calorimetry and X-ray diffraction studies of solid SNEDDS revealed the transformation of the crystalline structure of NDP due to its molecular dispersion state. In vitro dissolution study demonstrated higher dissolution of NDP from solid SNEDDS compared with NDP powder.     

A Menthol-Based Solid Dispersion Technique for Enhanced Solubility and Dissolution of Sulfamethoxazole from an Oral Tablet Matrix

A menthol-based solid dispersion was designed to improve the intrinsic solubility of the poorly soluble sulfamethoxazole- a class II drug molecule of Biopharmaceutics Classification System (BCS) displaying widespread antibacterial activity. Solid dispersions of menthol and sulfamethoxazole were compressed with hydroxypropyl methylcellulose (HPMC) into suitable sulfamethoxazole-loaded matrix tablets for oral drug delivery. The sulfamethoxazole-loaded solid dispersions and compressed tablets were characterized for their physicochemical and physicomechanical properties such as changes in crystallinity, melting point, molecular transitions, and textural analysis for critical analysis of their effects on the solubility and dissolution of sulfamethoxazole. The formulations were further evaluated for swelling, degradation, solubility, and in vitro drug release behavior. In vitro drug release from the sulfamethoxazole-loaded matrix tablets displayed a minimum and maximum fractional release of 0.714 and 0.970, respectively. The tablets further displayed different release rate profiles over the study periods of 12, 16, 48, and 56 h which were attributed to the varying concentrations of menthol within each formulation. Menthol was determined as a suitable hydrophilic carrier for sulfamethoxazole since it functioned as a solubilizing and release-retarding agent for improving the solubility and dissolution of sulfamethoxazole as well as controlling the rate at which it was released.KEY WORDS: crystallinity, menthol, oral solubility and dissolution, solid dispersion, sulfamethoxazole     

Enhancement of dissolution profile by solid dispersion (kneading) technique

This article investigates enhancement of the dissolution profile of valdecoxib using solid dispersion with PVP. The article also describes the preparation of fast-dissolving tablets of valdecoxib by using a high amount of superdisintegrants. A phase solubility method was used to evaluate the effect of various water-soluble polymers on aqueous solubility of valdecoxib. Polyvinyl pyrrolidone (PVP K-30) was selected and solid dispersions were prepared by the method of kneading. Dissolution studies, using the USP paddle method were performed for solid dispersions of valdecoxib. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and x-ray diffractometry (XRD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Tablets were formulated containing solid dispersion products and compared with commercial products. IR spectroscopy, XRD, and DSC showed no change in the crystal structure of valdecoxib. Dissolution of valdecoxib improved significantly in solid dispersion products (<85% in 5 minutes). Tablets containing solid dispersion exhibited better dissolution profile than commercial tablets. Thus, the solid dispersion technique can be successfully used for improvement of dissolution of valdecoxib. Published: August 18, 2006     

Evaluation of Griseofulvin Binary and Ternary Solid Dispersions with HPMCAS

The stability and dissolution properties of griseofulvin binary and ternary solid dispersions were evaluated. Solid dispersions of griseofulvin and hydroxypropyl methylcellulose acetate succinate (HPMCAS) were prepared using the spray drying method. A third polymer, poly[N-(2-hydroxypropyl)methacrylate] (PHPMA), was incorporated to investigate its effect on the interaction of griseofulvin with HPMCAS. In this case, HPMCAS can form H bonds with griseofulvin directly; the addition of PHPMA to the solid dispersion may enhance the stability of the amorphous griseofulvin due to greater interaction with griseofulvin. The X-ray powder diffraction results showed that griseofulvin (binary and ternary solid dispersions) remained amorphous for more than 19 months stored at 85% RH compared with the spray-dried griseofulvin which crystallized totally within 24 h at ambient conditions. The Fourier transform infrared scan showed that griseofulvin carbonyl group formed hydrogen bonds with the hydroxyl group in the HPMCAS, which could explain the extended stability of the drug. Further broadening in the peak could be seen when PHPMA was added to the solid dispersion, which indicates stronger interaction. The glass transition temperatures increased in the ternary solid dispersions regardless of HPMCAS grade. The dissolution rate of the drug in the solid dispersion (both binary and ternary) has significantly increased when compared with the dissolution profile of the spray-dried griseofulvin. These results reveal significant stability of the amorphous form due to the hydrogen bond formation with the polymer. The addition of the third polymer improved the stability but had a minor impact on dissolution.     

The Effects of Supercritical Carbon Dioxide Processing on Progesterone Dispersion Systems: a Multivariate Study

The aim of this work was to investigate the effects of supercritical carbon dioxide (SC-CO₂) processing on the release profiles of progesterone (PGN) and Gelucire 44/14 dispersion systems. A fractional factorial design was conducted for optimization of the particles from gas-saturated suspension (PGSS) method and formulation parameters and evaluating the effects of three independent responses: PGSS process yield, in vitro dissolution extent after 20 min (E₂₀) and t_1/2 for prepared PGN dispersion systems. The experimental domain included seven factors measured at two levels to determine which factors represent the greatest amount of variation, hence the most influence on the resulting PGN dispersion systems. Variables tested were temperature (A) and pressure (B) of the supercritical fluid, sample loading (C), SC-CO₂ processing time (D), sonication (E), drug-to-excipient ratio (F) and orifice diameter into the expansion chamber (G). The analysis of variance showed that the factors tested had significant effects on the responses (p value <0.05). It was found that the optimum values of the PGSS process are higher pressure (186 bar), higher temperature (60°C), a longer processing time (30 min) and lower PGN-to-excipient ratio of 1:10. The corresponding processing yield was 94.7%, extent of PGN dissolution after 20 min was 85.6% and the t_1/2 was 17.7 min. The results suggest that Gelucire 44/14-based dispersion systems might represent a promising formulation for delivery of PGN. The preparation of PGN-loaded Gelucire 44/14 dispersion systems from a PGSS method can be optimized by factorial design experimentation.Key words: factorial design experiment, in vitro dissolution, optimization, particles from gas-saturated suspensions (PGSS), process yield     

Dissolution Properties and Physical Characterization of Telmisartan–Chitosan Solid Dispersions Prepared by Mechanochemical Activation

Solid dispersion systems of telmisartan (a poorly water-soluble antihypertension drug) with biopolymer carrier chitosan have been investigated in this study. The mechanism of solubilization of chitosan for drug has been studied. In addition, the influence of several factors was carefully examined, including the preparation methods, the drug/carrier weight ratios, and the milling time. Drug dissolution and physical characterization of different binary systems were studied by in vitro dissolution test, particle size distribution, Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffractometry, and scanning electron microscopy. The results presented that the weak basic property of chitosan appeared as the main driving force for the drug dissolution enhancement. Other effects such as decreased drug crystallinity and size played a positive contributory role. Among the preparation methods, cogrinding was the best method showing strong drug amorphization, reduced particle size, and enhanced dissolution. The drug dissolution markedly improved with increasing the amount of chitosan in solid mixtures. As a result, a significant effect of chitosan increasing telmisartan dissolution has been demonstrated, and cogrinding in a roll ball mill was the best way to prepare solid dispersions, which had high degree of uniformity in drug content and had a practical application in manufacturing.     

Kneading Technique for Preparation of Binary Solid Dispersion of Meloxicam with Poloxamer 188

The aim of the present study was to enhance the dissolution rate of meloxicam (MLX), a practically water-insoluble drug by preparation of solid dispersion using a hydrophilic polymer, poloxamer 188 (PXM). The kneading technique was used to prepare solid dispersions. A 3² full factorial design approach was used for optimization wherein the drug, polymer ratio (X ₁), and the kneading time (X ₂) were selected as independent variables and the dissolution efficiency at 60 min (%DE₆₀) and yield percent were selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of MLX from PXM solid dispersions, a high level of X ₁ and a high level of X ₂ were suitable. The use of a factorial design approach helped in optimization of the preparation and formulation of solid dispersion. The optimized formula was characterized by solubility studies, angle of repose, and contact angle; Fourier transform infrared spectroscopy, differential scanning calorimetry, x-ray diffraction studies, and scanning electron microscopy demonstrated that enhanced dissolution of MLX from solid dispersion might be due to a decrease in the crystallinity of MLX and PXM. Analysis of dissolution data of optimized formula indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics as Fickian diffusion. In conclusion, dissolution enhancement of MLX was obtained by preparing its solid dispersion with PXM using kneading technique.