Molecular Characterization of Caveolin-induced Membrane Curvature

The generation of caveolae involves insertion of the cholesterol-binding integral membrane protein caveolin-1 (Cav1) into the membrane, however, the precise molecular mechanisms are as yet unknown. We have speculated that insertion of the caveolin scaffolding domain (CSD), a conserved amphipathic region implicated in interactions with signaling proteins, is crucial for caveola formation. We now define the core membrane-juxtaposed region of Cav1 and show that the oligomerization domain and CSD are protected by tight association with the membrane in both mature mammalian caveolae and a model prokaryotic system for caveola biogenesis. Cryoelectron tomography reveals the core membrane-juxtaposed domain to be sufficient to maintain oligomerization as defined by polyhedral distortion of the caveolar membrane. Through mutagenesis we demonstrate the importance of the membrane association of the oligomerization domain/CSD for defined caveola biogenesis and furthermore, highlight the functional significance of the intramembrane domain and the CSD for defined caveolin-induced membrane deformation. Finally, we define the core structural domain of Cav1, constituting only 66 amino acids and of great potential to nanoengineering applications, which is required for caveolin-induced vesicle formation in a bacterial system. These results have significant implications for understanding the role of Cav1 in caveola formation and in regulating cellular signaling events.     

葡萄糖淀粉酶在高压静电纺PEI/PVA纳米纤维膜上的离子吸附固定

旨在应用离子结合法将葡萄糖淀粉酶固定在PEI/PVA纳米纤维膜上并对其理化性质进行研究。采用高压静电纺丝技术制备聚乙烯亚胺(PEI)/聚乙烯醇(PVA)纳米纤维膜,采用热交联方法使其具备水稳定性后,再利用离子吸附法固定葡萄糖淀粉酶。结果显示,利用红外光谱(FT-IR)表征固定有葡萄糖淀粉酶的PEI/PVA纳米纤维膜,表明葡萄糖淀粉酶可成功固定在静电纺丝形成的PEI/PVA纳米纤维膜表面。通过固定化葡萄糖淀粉酶的酶学性质鉴定,发现固定化葡萄糖淀粉酶的最适反应温度为65℃,比游离的葡萄糖淀粉酶提高了6℃;固定化葡萄糖淀粉酶的适用p H值范围明显变宽;热稳定性和存贮稳定性显著增强且可以重复使用。利用离子吸附法能简便地将蛋白质分子固定于纳米纤维膜上,具有一定的应用前景。     

CO2-Assisted Induced Self-Assembled Aramid Nanofiber Aerogel Composite Solid Polymer Electrolyte for All-Solid-State Lithium-Metal Batteries

All-solid-state lithium metal batteries (ASSLMBs) hold great promise for the development of next-generation high-safety, high-energy-density lithium batteries, but still face the challenges of lithium dendrite growth and thickness. Herein, the ultrathin PEO-based composite solid polymer electrolyte (denoted as PAL) supported by a low-density self-supporting aramid nanofiber (ANF) aerogel framework is developed. The ANF aerogel obtained by a novel CO₂-assisted induced self-assembly method has a well-designed bilayer structure with double cross-linking degree. Benefiting from the intermolecular interaction between ANFs and PEO, the PAL achieves an ultrathin thickness (20 µm) with excellent thermal stability and mechanical strength. Meanwhile, due to the modulation of ionic pathways by the functionalized ANF, the PAL achieves uniform lithium deposition without dendrites, resulting in stable long cycling (1400 h) for symmetric cells. Consequently, the Li|PAL|LiFePO₄ (LFP) cell has excellent long-term cycling stability (1 C, >700 cycles, Coulombic efficiency > 99.8%) and fast charge/discharge performance (rate, 10 C). More practically, the Li|PAL|LFP cell achieves an energy density of 180 Wh kg⁻¹ due to the ability to match a high-loading (8 mg cm⁻²) cathode. Furthermore, the double-layer Li|PAL|LFP pouch cell demonstrates excellent flexibility and safety in cycling and abuse tests.     

Simultaneous Enantiomeric Determination of Propranolol,Metoprolol, Pindolol,and Atenolol in Natural Waters by HPLC on New Polysaccharide‐Based Stationary Phase using a Highly Selective Molecularly Imprinted Polymer Extraction

A simple high performance liquid chromatography method HPLC‐UV for simultaneous enantiomeric determination of propranolol, metoprolol, pindolol, and atenolol in natural water samples was developed and validated, using a molecularly imprinted polymer solid‐phase extraction. To achieve this purpose, Lux® Cellulose‐1/Sepapak‐1 (cellulose tris‐(3,5‐dymethylphenylcarbamate)) (Phenomenex, Madrid, Spain) chiral stationary phase was used in gradient elution and normal phase mode at ambient temperature. The gradient elution program optimized consisted of a progressive change of the mobile phase polarity from n‐hex/EtOH/DEA 90/10/0.5 (v/v/v) to 60/40/0.5 (v/v/v) in 13 min, delivered at a flow rate of 1.3 ml/min and a sudden change of flow rate to 2.3 ml/min in 1 min. Critical steps in any molecularly imprinted polymer extraction protocol such as the flow rate to load the water sample in the cartridges and the breakthrough volume were optimized to obtain the higher extraction recoveries for all compounds. In optimal conditions (100 ml breakthrough volume loaded at 2.0 ml/min), extraction recoveries for the four pairs of β‐blockers were near 100%. The MIP‐SPE‐HPLC‐UV method developed demonstrates good linearity (R² ≥ 0.99), precision, selectivity, and sensitivity. Method limit detection was 3.0 µg/l for propranolol and pindolol enantiomers and 20.0 and 22.0 µg/l for metoprolol and atenolol enantiomers, respectively. The proposed methodology should be suitable for routine control of these emerging pollutants in natural waters for a better understanding of the environmental impact and fate. Chirality 24:860–866, 2012. © 2012 Wiley Periodicals, Inc.     

Molecular Characterization of the Glycated Plasma Membrane Calcium Pump

We have previously demonstrated (Diabetes 39:707–711, 1990) that in vitro glycation of the red cell Ca²⁺ pump diminishes the Ca²⁺-ATPase activity of the enzyme up to 50%. Such effect is due to the reaction of glucose with lysine residues of the Ca²⁺ pump (Biochem. J. 293:369–375, 1993). The aim of this work was to determine whether the effect of glucose is due to a full inactivation of a fraction of the total population of Ca²⁺ pump, or to a partial inactivation of all the molecules. Glycation decreased the V _max for the ATPase activity leaving unaffected the apparent affinities for Ca²⁺, calmodulin or ATP. The apparent turnover was identical in both, the glycated and the native enzyme. Glycation decreased the V _max for the ATP-dependent but not for the calmodulin-activated phosphatase activities. Concomitantly with the inhibition, up to 6.5% of the lysine residues were randomly glycated. The probabilistic analysis of the relation between the enzyme activity and the fraction of nonmodified residues indicates that only one Lys residue is responsible for the inhibition. We suggest that glucose decreases the Ca²⁺-ATPase activity by reacting with one essential Lys residue probably located in the vicinity of the catalytic site, which results in the full inactivation of the enzyme. Thus, Ca²⁺-ATPase activity measured in erythrocyte membranes or purified enzyme preparations preincubated with glucose depends on the remaining enzyme molecules in which the essential Lys residue stays unglycated. Received: 9 March 1999/Revised: 11 May 1999     

Purification and Molecular Characterization of the Brain Synaptic Membrane Glutamate-Binding Protein

A glutamate-binding protein from rat brain synaptic plasma membranes has been purified to apparent homogeneity. This protein has a Mr of 14,300 based on amino acid and carbohydrate analyses. The protein is enriched with tryptophan residues, which contribute substantially to its hydrophobic nature. It also has a relatively high content of acidic amino acids, which determine is low isoelectric point (4.82). The protein exhibits either a single, high-affinity class of sites for L-[3H]glutamate binding (KD = 0.13 microM) when binding is measured at low protein concentrations, or two classes of sites with high (KD = 0.17 microM) and low affinities (KD = 0.8 microM) when binding is measured at high protein concentrations. These observations suggest preferential binding of L-glutamate to a self-associating form of the protein. The displacement of protein-bound L-[3H]glutamic acid by other neuroactive amino acids has characteristics similar to those observed for displacement of L-glutamate from membrane binding sites. Chemical modification of the cysteine and arginine residues results in an inhibition of glutamate binding activity. The possible function of this protein in the physiologic glutamate receptor complex of neuronal membranes is discussed.     

Correlation Between Atomic Structure and Electrochemical Performance of Anodes Made from Electrospun Carbon Nanofiber Films

A systematic study is made of the effect of the nitrogen species on the performance of Li‐ion storage and the capacities of carbon‐based anodes in Li‐ion batteries (LIBs). Electrospun carbon nanofiber (CNF) films are fabricated for use as binder‐free electrodes using a polyacrylonitrile precursor. When the CNF films are subjected to carbonization, transformation occurs from an amorphous to a graphitic structure with associated reduction of nitrogen‐containing functional groups. The structural change strongly affects where the Li ions are stored in the CNF electrodes. It is revealed that Li ions can be stored not only between the graphene layers, but also at the defect sites created by nitrogen functionalization. The latter is mainly responsible for the widely reported improved electrochemical performance of LIBs due to N‐doping of carbon materials. An optimized carbonization temperature of 550 °C is identified, which gives rise to a sufficiently high nitrogen content and thus a high capacity of the electrode.     

Development of Highly Stable and Mass Transfer‐Enhanced Cathode Catalysts: Support‐Free Electrospun Intermetallic FePt Nanotubes for Polymer Electrolyte Membrane Fuel Cells

Proton exchange membrane fuel cells (PEMFCs) are an alternative clean energy source and they are attracting increased attention. However, several limitations such as degradation of the carbon support and Nafion ionomer in the cathode electrode must be overcome for practical applications of PEMFCs. Support‐free 1D‐ordered intermetallic nanotubes (NTs) are considered as promising candidates for highly active and durable cathode catalysts in PEMFCs. However, 1D nanotubes are difficult to produce at large scale because they have generally been synthesized using a template‐based method that requires multistep synthetic routes. Herein, a simple and scalable method to produce ordered‐intermetallic FePt nanotubes by electrospinning is reported. When tested as cathode catalysts, under the US Department of Energy's reference condition, the activity of face‐centered‐tetragonal (fct) FePt NTs surpasses that of commercial Pt/C. In an accelerated degradation test at 1.4 V for 3 h, the degradation activity rate of fct‐FePt NTs is only 10%, whereas that of commercial Pt/C catalysts is 65%. For practical PEMFCs, this approach would provide simple routes to support‐free intermetallic nanotube structures with superior kinetic activity and higher durability than those of commercial Pt/C catalyst.     

Development of a Selective Molecularly Imprinted Polymer-Based Solid-Phase Extraction for Copper from Food Samples

In this study is proposed a pre-concentration procedure using molecular imprinted polymer for the determination of copper in food samples. The copper imprinted polymer was prepared by free radical solution polymerization in a tube containing copper, morin, 4-vinylpyridine as a functional monomer, ethyleneglycoldimethacrylate as a cross-linking monomer, and 2,2′-azobisisobutyronitrile as an initiator. The polymer particles synthesized both before and after leaching have been characterized by infrared and X-ray diffraction studies. The effect of different variables such as pH of solution, adsorption and desorption time, type, and least amount of eluent for elution of the complex of polymer was evaluated. Extraction efficiencies more than 99% were obtained by elution of the polymer with 10 mL of 0.5 mol L^?1 EDTA. The detection limit of the proposed procedure was 0.14 μg L^?1. The method was applied to the determination of copper in food real samples.     

硝酸铵水凝胶分子印迹聚合物的制备

目的:目前安全问题成为世界各国的首要问题,尤其是对炸药分子的检测。硝酸铵是硝铵炸药的主要成分。研究水凝胶分子印迹法对硝铵炸药分子的检测。方法:水凝胶分子印迹方法制备硝酸铵水凝胶分子印迹聚合物,运用静态结合实验对其结合率进行了测定。结果:聚合物对硝酸铵具有良好的识别和吸附性能。印迹聚合物的解离常数为4.08g/L,最大吸附量为3.51mg/g。结论:水凝胶分子印迹法可合成水溶性炸药分子印迹聚合物,并且识别及吸附性能良好。     

硝酸铵水凝胶分子印迹聚合物的制备

目的：目前安全问题成为世界各国的首要问题,尤其是对炸药分子的检测。硝酸铵是硝铵炸药的主要成分。研究水凝胶分子印迹法对硝铵炸药分子的检测。方法：水凝胶分子印迹方法制备硝酸铵水凝胶分子印迹聚合物,运用静态结合实验对其结合率进行了测定。结果：聚合物对硝酸铵具有良好的识别和吸附性能。印迹聚合物的解离常数为4.08g/L,最大吸附量为3.51mg/g。结论：水凝胶分子印迹法可合成水溶性炸药分子印迹聚合物,并且识别及吸附性能良好。     

白藜芦醇分子印迹聚合物微球的制备及特性评价(英文)

以聚苯乙烯微球为种球,白藜芦醇为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球。用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性。微球的凹陷可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量。     

基于分子印迹技术的细菌传感检测

分子印迹因其材料结构的稳定性及靶标物识别的特异性而被广泛应用于生化分离分析的相关领域。近年来，将具有选择性捕获、分离和富集靶标物等优势的分子印迹技术与生化传感检测技术有机结合，是目前细菌等微生物高效检测领域备受关注的研究热点。本文就分子印迹技术在细菌分析中的印迹方法、分析检测技术和典型应用等方面的最新进展进行综述。首先介绍了细菌分子印迹原理，对表面印迹的材料以及直接压印、间接印迹和电聚合等制备方法进行了总结和归纳；重点对基于荧光、电化学、石英晶体微天平（QCM）等检测模式的细菌印迹传感监测在细菌分析检测及其与微流控芯片技术耦合的应用和进展进行了综述；最后，提出了存在的挑战及发展的趋势。     

Chemical and Immunological Characterization of a Low Molecular Weight Outer Membrane Protein of Salmonella typhi

A new immunogenic outer membrane protein, Omp-28 (MW 28,000 and pI 4.6), was isolated from smooth Salmonella typhi cells by the use of an extracting medium containing 6 m urea, 1% deoxycholate and 5 mM EDTA. The purification of Omp-28 was performed by gel filtration and fast ion exchange chromatography. This protein showed to be the prevalent component isolated by the latter methodology. Omp-28 is formed by three identical subunits (MW 9,000), not linked by disulfide bonds. The partial N-terminal amino acid sequence of Omp-28 presented great homology with part of the sequence of an Escherichia coli protein found in a precursor whose sequence was predicted by c-DNA. ELISA and Western blotting identified Omp-28 as the major antigenic protein present in the outer membrane protein fraction, isolated by gel filtration. Antibodies against Omp-28 were detected by ELISA in 43% of 28 sera from typhoid fever convalescent patients. The antisera from mice immunized with Omp-28 and the highest positive typhoid fever convalescent serum gave a positive bactericidal test, killing 50% of Salmonella typhi cells in serum dilutions of 1/80 and 1/320, respectively. These results indicate the immunogenic importance of Omp-28 isolated from Salmonella typhi outer membrane and strongly suggest it should be used in further studies of animal protection against the disease caused by this pathogenic bacteria.     

Selective Interaction Model and Photoreceptor Cell Membrane

A mathematical model is proposed in order to describe, from the thermodynamic point of view, the changes in the photoreceptorcell membrane induced by light stimuli. The phenomenologicalbackground is the increase of the fly microvillar membrane ionicconductivity as a consequence of Ca^++-Na⁺ affinity modification under light action. On the basis of the analogywith the model of protein interaction in mixed solvents, themodel is focused on the selective interaction between ionchannels gates and two ionic ligands. Three possible theoretical cases are examined.     

Effect of Biotin and Galactose Functionalized Gelatin Nanofiber Membrane on HEp-2 Cell Attachment and Cytotoxicity

In the present study, we prepared a gelatin nanofiber matrix using an electrospinning technique and cross-linked the nanofibers with 10 % glutaraldehyde vapors. The insoluble nanofibers were functionalized with bioactive molecules like biotin (1 %) and galactose (1 %) by adsorption and coelectrospinning. Surface morphology and fiber dimension were analyzed using atomic force microscopy. The amounts of biotin and galactose bound to the nanofibers before and after adsorption were quantified using high-performance liquid chromatography. Human larynx carcinoma (HEp-2) cell attachment, morphology and cytotoxic characteristics were studied using crystal violet staining and the MTT assay. Cell attachment and viability were highest in biotin- and galactose-embedded nanofibers compared to native nanofibers. Cytotoxicity was less with biotin- and galactose-embedded and adsorbed nanofibers compared to control nanofibers. Hence, we suggest that these biocompatible, nontoxic, biodegradable, functionalized nanofibers could be a potential candidate for application in tissue engineering and scaffold preparation.     

Development of Small Diameter Nanofiber Tissue Engineered Arterial Grafts

The surgical repair of heart and vascular disease often requires implanting synthetic grafts. While synthetic grafts have been successfully used for medium-to-large sized arteries, applications for small diameter arteries (<6 mm) is limited due to high rates of occlusion by thrombosis. Our objective was to develop a tissue engineered vascular graft (TEVG) for small diameter arteries. TEVGs composed of polylactic acid nanofibers with inner luminal diameter between 0.5 and 0.6 mm were surgically implanted as infra-renal aortic interposition conduits in 25 female C17SCID/bg mice. Twelve mice were given sham operations. Survival of mice with TEVG grafts was 91.6% at 12 months post-implantation (sham group: 83.3%). No instances of graft stenosis or aneurysmal dilatation were observed over 12 months post-implantation, assessed by Doppler ultrasound and microCT. Histologic analysis of explanted TEVG grafts showed presence of CD31-positive endothelial monolayer and F4/80-positive macrophages after 4, 8, and 12 months in vivo. Cells positive for α-smooth muscle actin were observed within TEVG, demonstrating presence of smooth muscle cells (SMCs). Neo-extracellular matrix consisting mostly of collagen types I and III were observed at 12 months post-implantation. PCR analysis supports histological observations. TEVG group showed significant increases in expressions of SMC marker, collagen-I and III, matrix metalloproteinases-2 and 9, and itgam (a macrophage marker), when compared to sham group. Overall, patency rates were excellent at 12 months after implantation, as structural integrity of these TEVG. Tissue analysis also demonstrated vessel remodeling by autologous cell.     

Application of Molecularly Imprinted Polymers to Selective Removal of Clofibric Acid from Water

A new molecularly imprinted polymer (MIP) adsorbent for clofibric acid (CA) was prepared by a non-covalent protocol. Characterization of the obtained MIP was achieved by scanning electron microscopy (SEM) and nitrogen sorption. Sorption experimental results showed that the MIP had excellent binding affinity for CA and the adsorption of CA by MIP was well described by pseudo-second-order model. Scatchard plot analysis revealed that two classes of binding sites were formed in the MIP with dissociation constants of 7.52±0.46 mg L⁻¹ and 114±4.2 mg L⁻¹, respectively. The selectivity of MIP demonstrated higher affinity for CA over competitive compound than that of non-imprinted polymers (NIP). The MIP synthesized was used to remove CA from spiked surface water and exhibited significant binding affinity towards CA in the presence of total dissolved solids (TDS). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance.