The anchorage mechanics of deep rooted larch, Larix europea L. japonica

The anchorage of deep rooted 16-year-old larch trees, Larixeuropea japonica, has been studied by combining winching testswith analyses of strain around the base of the trunk and rootsystem and mechanical tests on individual roots. These showedthat anchorage is provided by the laterals which emerge fromaround the stem base, sinker roots which emerge along theirlength, and tap roots positioned directly underneath the bole.During anchorage failure the leeward laterals are bent and eventuallybreak close to their base, whilst the windward laterals arepulled out of the ground, with their sinker roots intact. Afterinitially being confined by the soil and bending, the tap rootrotates in the soil. Anchorage failure is similar when the soilis dry as when it is wet, but failure occurs closer to the trunk.Strain measurements along the lateral roots revealed that thestresses were highest close to the trunk and that these regionsof the roots contribute most to tree stability. The two major components of anchorage were found to be the resistanceof leeward laterals to bending and the resistance of tap rootsand windward sinkers to uprooting. Bending tests on leewardlaterals revealed that they provide around 25% of tree anchorage.Almost 75% of the anchorage strength must, therefore, be providedby the windward sinkers and tap roots. Anchorage strength ofroots was positively correlated to their cross-sectional area.The vertical orientation of the sinkers makes the anchoragesystem of larch more efficient than the plate system formedby Sitka spruce on waterlogged soils and means that no root-soilplate is formed. Key words: Anchorage, root architecture, sinker roots, root bending strength, windthrow     

Anchorage Mechanics of the Tap Root System of Winter-sown Oilseed Rape (Brassica napus L.)

The anchorage mechanics of mature winter-sown oilseed rape (‘Envol’)were investigated by combining a morphological and mechanicalstudy of the root system with anchorage tests on real and modelplants. Oilseed rape plants were anchored by a rigid tap root;the few laterals all emerged below the centre of rotation ofthe root system (approx. 30 mm below the soil surface). Whenplants were pulled over, the tap root bent and the top 30 mmmoved in the soil towards the direction of pull, creating acrevice on the opposite side. The maximum anchorage moment was2.9 ± 0.36 N m. Two main components of anchorage wereidentified: the bending resistance of the tap root and the resistanceof the soil on the near side to compression. The relative importanceof these components was determined by measuring both the bendingresistance of the tap root, and the resistance of metal tubesof varying diameter, inserted to various depths in the soil,to being pulled over. These tests showed that the tap root bendingmoment at failure could account for around 40% of anchoragemoment, while soil resistance could account for around 60%.The model tests on the tubes also help to shed light on theway in which the dimensions of tap roots will influence theiranchorage capability. Copyright 2001 Annals of Botany Company Anchorage, lodging, root bending resistance, mechanical properties, oilseed rape, Brassica napus L     

The Anchorage Mechanics of Maize, Zea mays

The anchorage system of mature maize Zea mays was investigatedby combining morphological and anatomical study of the rootsystem with mechanical tests on roots and with studies in whichplants were pulled over. The root system is dominated by 20–30adventitious roots which emerge in rings from the stem basepointing radially downwards and outwards, approximately 30°from the vertical. Roots are strengthened near their base bya heavily lignified exodermis which makes them rigid in bending;distally, strength and rigidity both decrease because rootsbecome thinner and less lignified. When plants were pulled over,a maximum anchorage moment of 5–20 Nm was mobilized atangles of 8–10°, larger plants having stronger anchorage.Movement was initially centred on the leeward side of the stem,anchorage being due to the resistance of both windward and leewardroots to axial motion through the soil and to bending. At displacementsover 10°, however, leeward roots buckled under combinedbending and compression and the centre of rotation shifted tothe windward perimeter of the root system; subsequent movementof the cone of roots and soil was resisted only by the bearingstrength of the soil beneath it. The differences between anchorage failure in balsam and sunflowersand that in maize probably results from the lower angular spreadand the weakness in compression of the maize roots which preventsthe leeward side of the root system from bearing large downwardloads. The system behaves more like that of wheat; these resultssuggest that the lodging resistance of both plants may be improvedby increasing the bending strength and angle of spread of theadventitious roots. Key words: Zea mays, roots, anchorage     

The Increase in Anchorage with Tree Size of the Tropical Tap Rooted TreeMallotus wrayi, King (Euphorbiaceae)

The mechanical development of the anchorage system of the taprooted tropical speciesMallotus wrayiKing (Euphorbiaceae) wasinvestigated by pulling over and examining trees with a diameterat breast height (d_bh) of 4.2 cm to 14.3 cm. The mode of mechanicalfailure depended upon the size of the tree: thicker trees (d_bhapprox.9 cm) failed in the ground with their tap roots pushing intothe soil on the winchward side; in smaller trees (d_bhapprox.7 cm) the trunk snapped before anchorage failure; and in verysmall trees (of d_bh<6 cm) neither type of failure occurredand the trees returned to their original upright position undamagedafter the test. The anchorage strength of the trees was correlatedwith the second power of trunk diameter rather than with thethird power that theory suggests is optimal because tap rootsdid not show an isometric increase in length or diameter. Thereforeas trees grow larger the ‘factor of safety’ againstanchorage failure falls, making them prone to fail in theirroots. These results suggest that only relatively small treespecies can rely solely on the tap root to prevent uprooting.It may be for this reason that most larger trees develop thicklateral roots.Copyright 1998 Annals of Botany Company Anchorage, tap roots, scaling,Mallotus wrayi, isometric growth, functional development, windthrow, root systems.     

Understanding structural roots system of 5-year-old African plum tree (D. edulis) of seed and vegetative origins (G. Don) H. J. Lam

Root morphology of 5-year-old trees of Dacryodes edulis (G. Don) H. J. Lam of seed and two vegetative (cutting and marcot) origins were assessed in Cameroon. Roots of D. edulis trees of seed and vegetative origins were totally excavated and their root morphology described and quantified. Trees of seed origin were characterized by a tap root, reaching depths of about 1.2 m. Contrarily trees of cutting origin showed three strong vertical roots (d > 5 mm) with the longest reaching depths of 1.31 m. Trees of marcot origin were observed to have thick, relatively short prominent vertical roots, reaching depths of 1.15 m. At fixed lateral intra-row distances of 50 cm from tree bases, trees of seed and marcot origins recorded high root densities at soil depths of 0–20 cm; both differed significantly (p = 0.032) from those of trees of cutting origin. At soil depth of 60–100 cm, trees of cutting origin recorded the highest root density which however differ significantly (p = 0.016) from those of trees of both seed and marcot origins. D. edulis trees of seed origin had a tap root system, whereas trees of vegetative origin (cuttings and marcots) had developed prominent main adventitious roots growing vertically (sinker roots), into greater depths and a wider/deeper lateral root spread than seedlings. This could be a vital adaptation to the absence of a genetically determined tap roots in trees of vegetative origins so as not to compromise the acquisition of soil-based resources (water and dissolved ions) and anchorage.     

A Comparative Study of the Anchorage Systems of Himalayan Balsam Impatiens glandulifera and Mature Sunflower Helianthus annuus

The anchorage systems of Himalayan balsam Impatiens glanduliferaand mature sunflowers Helianthus annuus were investigated bycombining morphological and anatomical study of the root systemswith mechanical tests on roots and with studies in which matureplants were pulled over. The root system of balsam is dominated by large numbers of fleshytapering adventitious roots which point downwards from theirorigin at the wide stem base. Sunflowers, in contrast, havea tapering tap-root from which 20–30 well-branched lateralsemerge, pointing radially outwards and downwards. Roots of eachspecies have contrasting anatomy: those of balsam resemble stems,having a central watery pith and being strengthened peripherallyby lignification of vascular tissue; roots of sunflowers arestrengthened by a solid woody stele. Roots of both species arerigid in tension and, towards the base, in bending. Both species exhibited similar behaviour to that known for treessuch as Sitka spruce; when pulled over they rotated about ahinge leeward of the stem base and a root-soil ball was pulledout of the surrounding soil. Anchorage was resolved into threecomponents which, in order of decreasing magnitude, were (i)the resistance to pulling of the roots on the windward sideof the plant (and, for sunflower, the tap-root); (ii) the resistanceof roots and soil at the leeward hinge to rotation; and (iii)the weight of the root-soil ball. Sunflower had stronger anchoragebut achieved it at a greater cost in terms of the dry mass ofits root system. In each species, the morphology, anatomy and mechanical propertiesof the root system can be related to those of the stem. Thewide stem base of balsam allows large numbers of mechanicallyefficient fleshy roots to be attached whereas in sunflowersa woody tap-root system is necessary to anchor the much narrowerstem. Key words: Impatiens, Helianthus, roots, anchorage     

Is it possible to manipulate root anchorage in young trees?

The optimal root system architecture for increased tree anchorage has not yet been determined and in particular, the role of the tap root remains elusive. In Maritime pine (Pinus pinaster Ait.), tap roots may play an important role in anchoring young trees, but in adult trees, their growth is often impeded by the presence of a hard pan layer in the soil and the tap root becomes a minor component of tree anchorage. To understand better the role of the tap root in young trees, we grew cuttings (no tap root present) and seedlings where the tap root had (?) or had not (+) been pruned, in the field for 7 years. The force (F) necessary to deflect the stem sideways was then measured and divided by stem cross-sectional area (CSA), giving a parameter analogous to stress during bending. Root systems were extracted and root architecture and wood mechanical properties (density and longitudinal modulus of elasticity, E _L ) determined. In seedlings (?) tap roots, new roots had regenerated where the tap root had been pruned, whereas in cuttings, one or two lateral roots had grown downwards and acted as tap roots. Cuttings had significantly less lateral roots than the other treatments, but those near the soil surface were 14% and 23% thicker than plants (+) and (?) tap roots, respectively. Cuttings were smaller than seedlings, but were not relatively less resistant to stem deflection, probably because the thicker lateral roots compensated for their lower number. Apart from stem volume which was greater in trees (+) tap roots, no significant differences with regard to size or any root system variable were found in plants (?) or (+) tap roots. In all treatments, lateral roots were structurally reinforced through extra growth along the direction of the prevailing wind, which also improved tap root anchorage. Predictors of log F/CSA differed depending on treatment: in trees (?) tap roots, a combination of the predictors stem taper and %volume allocated to deep roots was highly regressed with log F/CSA (R ² = 0.83), unlike plants (+) tap roots where the combined predictors of lateral root number and root depth were best regressed with log F/CSA (R ² = 0.80). In cuttings, no clear relationships between log F/CSA and any parameter could be found. Wood density and E _L did not differ between roots, but did diminish with increasing distance from the stem in lateral roots. E _L was significantly lower in lateral roots from cuttings. Results showed that nursery techniques influence plant development but that the architectural pattern of Maritime pine root systems is stable, developing a sinker root system even when grown from cuttings. Anchorage is affected but the consequences for the long-term are still not known. Numerical modelling may be the only viable method to investigate the function that each root plays in adult tree anchorage.     

Understanding the impact of root morphology on overturning mechanisms: a modelling approach

BACKGROUND AND AIMS: The Finite Element Method (FEM) has been used in recent years to simulate overturning processes in trees. This study aimed at using FEM to determine the role of individual roots in tree anchorage with regard to different rooting patterns, and to estimate stress distribution in the soil and roots during overturning. METHODS: The FEM was used to carry out 2-D simulations of tree uprooting in saturated soft clay and loamy sand-like soil. The anchorage model consisted of a root system embedded in a soil block. Two root patterns were used and individual roots removed to determine their contribution to anchorage. KEY RESULTS: In clay-like soil the size of the root-soil plate formed during overturning was defined by the longest roots. Consequently, all other roots localized within this plate had no influence on anchorage strength. In sand-like soil, removing individual root elements altered anchorage resistance. This result was due to a modification of the shape and size of the root-soil plate, as well as the location of the rotation axis. The tap root and deeper roots had more influence on overturning resistance in sand-like soil compared with clay-like soil. Mechanical stresses were higher in the most superficial roots and also in leeward roots in sand-like soil. The relative difference in stresses between the upper and lower sides of lateral roots was sensitive to root insertion angle. Assuming that root eccentricity is a response to mechanical stresses, these results explain why eccentricity differs depending on root architecture. CONCLUSIONS: A simple 2-D Finite Element model was developed to better understand the mechanisms involved during tree overturning. It has been shown how root system morphology and soil mechanical properties can modify the shape of the root plate slip surface as well as the position of the rotation axis, which are major components of tree anchorage.     

Responses of the Root Systems of Sunflower and Maize to Unidirectional Stem Flexure

Plants of two contrasting species of herbaceous annuals, thedicot sunflower (Helianthus annuusL.) and the monocot maize(Zea maysL.), grown in the glasshouse were subjected to regularunidirectional stem flexure. Differences in morphology and mechanicalproperties of roots and shoots were then investigated. Rootsystems were divided into quadrants around the axis of stimulationand differences in root morphology and mechanics between thezones were investigated. There were considerable differencesbetween roots in the leeward and windward zones compared withroots perpendicular to the axis of stimulation. First-orderlateral roots in both species were thicker, more rigid and morenumerous. These results suggest that plant roots respond locallyto mechanical stimulation. There were, however, also differencesin the responses of the two species. In sunflower, the tap rootand stem base became elliptical in cross section with the majoraxis lying in the plane of stimulation. The lateral roots offlexed sunflowers in both the leeward and windward zones showedsimilar growth responses: roots were thicker, more numerousand weighed more than those in the perpendicular zones. However,only leeward roots showed significant differences in their mechanicalproperties; roots were more rigid, stronger and stiffer. Incontrast, the leeward roots of maize were thicker and more numerous,with a greater biomass than the windward roots. However, onlyroots in the windward zone were stiffer than those in the perpendicularzone. These differences between sunflower and maize are relatedto their contrasting anchorage mechanics.Copyright 1998 Annalsof Botany Company Anchorage, biomechanics, adaptive growth, roots, thigmomorphogenesis,Helianthus annuusL.,Zea maysL.     

The Mechanics of Anchorage in Wheat Triticum aestivum L.: I. THE ANCHORAGE OF WHEAT SEEDLINGS

Model of the mechanics of uprooting lead to the identificationof ‘optimal’ anchorage systems which can withstanda given upward force at a minimum construction cost. Such systemshave many downward-pointing fibrous roots which are strengthenedprogressively towards the base. A study of the anchorage systemof 7- and 21-d-old wheat (Triticum aestivum L.) plants showedthat the plants possessed five seminal roots, of which onlythree pointed vertically. Each root was well suited for anchorage,being convered in root hairs and strengthened progressivelytowards the base by lignification of the stele. Strength andstiffiness of roots but not their mass per unit length increasedwith age. There was little interaction between roots when plantswere uprooted; the three vertical roots broke while the twohorizontal ones pulled out, as occurred when roots were pulledout singly, Uprooting forces increased with age and the rootsystem could withstand uprooting forces greater than those requiredto pull out upper leaves, so reducing the chances of the plantbeing uprooted by a herbivore, By 3 weeks a stiff adventitiousroot system, which would later help prevent the wheat lodging,was developing.     

The Mechanics of Anchorage in Wheat Triticum aestivum L.: II. ANCHORAGE OF MATURE WHEAT AGAINST LODGING

The root system of mature wheat Triticum aestivum Marts Doveis dominated by the 7 to 15 adventitious roots which emergefrom the perimeter of the stem base, pointing radially outwardsand downwards. The basal, coronal region of these roots is thickand unbranched, attached to a rhizosheath of earth by a densecovering of root hairs and stiffened in bending by lignificationof outer layers of the cortex. Root lodging of plants involves bending of the coronal rootsat their base and axial movement of leeward and windward rootsthrough the soil; their resistance to these motions providemoments resisting lodging. A model of anchorage was producedby summing the resistance of each root to both forms of motionto give two anchorage components. The model was tested in aseries of mechanical experiments in which simulated lodgingwas followed by loading of individual roots; results supportedthe anchorage model and suggested that in the experimental conditionsthe two components of anchorage were approximately equal inmagnitude. The stem was about 30% stronger than the anchoragesystem. The coronal anchorage roots made up 4.4% of total dry mass;it is suggested that anchorage could be improved either by increasinginvestment in this region or by altering root orientation. Sequentialdevelopment of seminal and adventitious root systems is relatedto the changes in anchorage requirement with age.     

Influence of wind loading on root system development and architecture in oak (Quercus robur L.) seedlings.

The effect of wind loading on seedlings of English oak (Quercus robur L.) was investigated. Instead of using a traditional wind tunnel, an innovative ventilation system was designed. This device was set up in the field and composed of a rotating arm supporting an electrical fan, which emitted an air current similar to that of wind loading. Oaks were sown from seed in a circle around the device. A block of control plants was situated nearby, and was not subjected to artificial wind loading. After 7 months, 16 plants from each treatment were excavated, and root architecture and morphological characteristics measured using a 3D digitiser. The resulting geometrical and topological data were then analysed using AMAPmod software. Results showed that total lateral root number and length in wind stressed plants were over two times greater than that in control trees. However, total lateral root volume did not differ significantly between treatments. In comparing lateral root characters between the two populations, it was found that mean root length, diameter and volume were similar between the two treatments. In trees subjected to wind loading, an accentuated asymmetry of root distribution and mean root length was found between the windward and leeward sides of the root system, with windward roots being significantly more numerous and longer than leeward roots. However, no differences were found when the two sectors perpendicular to the wind direction were compared. Mean tap root length was significantly higher in control samples compared to wind stressed plants, whilst mean diameter was greater in the latter. Wind loading appears to result in increased growth of lateral roots at the expense of the tap root. Development of the lateral root system may therefore ensure better anchorage of young trees subjected to wind loading under certain conditions.     

The Mechanics of Root Lodging in Winter Wheat, Triticum aestivum L.

The anchorage of winter wheat, Triticum aestivum L., is providedby a cone of rigid coronal roots which emerge from around thestem base. During root lodging this cone rotates at its windwardedge below the soil surface, the soil inside the cone movingas a block and compressing the soil beneath. A theoretical modelof anchorage suggested that lodging resistance should be dependenton the diameter of the root-soil cone, coronal root bendingstrength and soil shear strength. We tested the predictions of the anchorage model by carryingout two series of experiments. In the first, varieties of contrastinglodging resistances were artificially lodged. The moment requiredto rotate plants into the soil, the diameter of the root-soilcone, and the bending strength of the coronal roots were recorded.The lodging moment was correlated with the size of the soilcone, as predicted. Generally, differences in anchorage strengthbetween varieties were due to differences in root-soil conediameter, although coronal root strength was also important. A second series of tests was carried out using model plantsanchored by plastic discs. The behaviour of the models duringartificial lodging supported the anchorage model; the forceresisting lodging was similar to that of plants with root-soilcones of the same size and the resisting force was dependenton the soil strength. These results suggest that root lodging resistance might beimproved by increasing both the angle of spread and the bendingstrength of the coronal roots. Key words: Anchorage, root-soil cone, coronal roots, lodging, wheat     

Buttress trees in a 20-hectare tropical dipterocarp rainforest in Xishuangbanna,SW China

Aims Buttresses are prevalent and are important to many ecological processes in tropical rainforests but are overlooked in many rainforest studies. Based on a buttress survey in a 20-hectare plot, this study aims to answer the following questions: (I) Is buttress forming a fixed species characteristic? (ii) Is there any phylogenetic signal for buttress forming across a broad taxonomic scale? (iii) Is buttress forming an inherent feature or simply induced by environmental factors, and how is this relevant to the size of the tree?Methods We surveyed buttresses for all 95940 trees with diameter at breast height (DBH) ≥10mm in a 20-ha tropical dipterocarp rainforest in Xishuangbanna, SW China. The occurrence of buttresses was compared across different taxa and across different tree-size classes. A phylogenetic analysis was conducted among buttressed and non-buttressed species in order to understand the evolutionary background of buttress formation.Important findings This preliminary study showed that buttress trees are very abundant (making up 32% of trees with ≥100mm DBH) in this 20-ha tropical rainforest situated at the northern edge of the tropics. Fifty-one percent of the 468 tree species in the plot had stems that produced buttresses. Large trees were more likely to develop buttresses than smaller ones. We found that although buttress formation is not a fixed species characteristic, there is a strong phylogenetic signal for buttress formation in larger species.     

The Anchorage of Leek Seedlings: The Effect of Root Length and Soil Strength

The mechanical behaviour of single roots being extracted fromsoil was modelled as a process in which tension is transferredfrom the upper regions of the root to the soil via shear. Quantitativepredictions were made about the extraction forces and the shapeof the uprooting curves, and these were tested using leek radiclesof different lengths in soil of two different strengths. Results of uprooting tests were qualitatively similar to thepredictions. The pullout resistance rose with root length, untilthe breaking strength of the root was reached, at around 30mm: longer roots all broke before the tip was stressed. In wholeroot systems, therefore, failure will occur proximally beforethe line distal roots are mechanically stressed, so these canhave no anchorage function. Resistance to an upward force will be most economically achievedby having many strengthened proximal root axes, as in the adventitiousroot systems of grasses, sedges and stoloniferous dicots. Allium porrum, root, anchorage, shear, tension, soil     

Strain distribution during anchorage failure of Pinus pinaster Ait. at different ages and tree growth response to wind-induced root movement

Winching tests were carried out on 5- 13- and 17-year-old tap rooted Maritime pine (Pinus pinaster Ait.) in order to determine how the mode of anchorage failure changes throughout the life of a tree. As trees were pulled sideways, strain along the lateral roots was recorded using strain gauges attached to a strain indicator. Measurements of strain in the root system, taken during winching, provide information about root movement when loaded by wind. The mode of mechanical failure appeared to depend on tree age. The youngest trees bent over completely during winching, but did not break due to the plasticity of their trunks. The 13-year-old trees either broke at the base of the tree (due to the presence of grafting scar tissue) or at the base of the tap-root. The oldest trees broke at the base of the tap-root and sounds of roots breaking were also heard. Strain was twice as great in the trunk compared to the roots in the 5- and 13-year-old trees and was three times greater in the compression roots of 17-year–old trees compared to that in the trunk. In one 17-year-old tree, strain was found to increase at a distance of 35 cm in tension roots before decreasing again. Although the mode of failure changed with tree size, anchorage strength increased proportionally with the third power of trunk diameter, therefore another reason why failure differs with tree age must exist. In order to determine if different types of wood were being laid down in the lateral roots in response to wind loading, maturation strains, indicating the existence of mechanical stress in developing wood cells, were measured at different points along the roots. A high correlation was found between maturation strain and strain measured during winching, in roots that lay in the wind direction only. Therefore, trees appear to be able to respond to external loading stress, even at a local level within a root. This revised version was published online in June 2006 with corrections to the Cover Date.     

Variations in maturation strains and root shape in root systems of Maritime pine (Pinus pinaster Ait.)

 In order to determine if different types of wood were being laid down in the root system of Maritime pine (Pinus pinaster Ait), in response to wind loading, longitudinal residual maturation strains (LRMS), indicating the existence of mechanical stress in developing wood cells, were measured in the trunk and lateral roots. Two age groups of trees (5- and 13-year- old) were compared. LRMS were greater in the trunk and roots of 13-year-old trees than in 5-year-old trees. This phenomenon may be due to increased competition between older trees. LRMS in leeward roots of both age-groups were positive i.e. the wood cells had developed under compression, as also occurs in reaction wood of gymnosperms. As leeward roots are placed under compression during tree sway, an abnormal type of wood may form in the roots in order to counteract the increased stress. In other roots, the strains were negative i.e. the cells had developed under tension, as occurs in normal wood. In the roots of younger trees, LRMS were also positive nearer the stem, thus indicating that wood formation may also be influenced by bending stresses experienced in this zone. In addition to LRMS measurements, radial growth in roots was examined in order to determine the influence of mechanical loading on secondary growth. In older trees, there was a significant increase of 34% in woody growth below the biological centre, compared to that above. This eccentricity is unlike that found in most other tree species, where secondary growth is usually greater on the upper side of the root. However, Maritime pine has a tap root, which will alter the pattern of stress within the root system. Under wind loading, a concentration of mechanical stress will develop at the bases of the stem, lateral roots and tap root. Received: 7 July 1997 / Accepted: 11 December 1997     

Growth and Development of Roots of Grapevine (Vitis vinifera L.) in Relation to Water Uptake from Soil

Developmental patterns of lateral roots and their vascular differentiationwere investigated for Vitis vinifera L. cv. Shiraz to assessthe likely contribution of lateral roots to total water uptakeof plants subjected to different irrigation regimes. Correlationanalyses showed a significant positive correlation between mainroot diameter and the diameter of first order lateral rootsof well-watered plants, but in water-stressed plants the twowere not significantly correlated. The correlations betweendiameters of first order lateral roots and the diameters ofmain roots were greater than correlations between the lengthsof first order laterals and the diameters of main roots. Thesuberised surface area of well-watered main roots increasedfrom 4% of total surface area at 0·25 cm to 100% at 10cm from the tip, whereas that of stressed plants increased from15% at 0·25 cm to 100% at 5 cm from the tip. In all treatmentsthe highest linear density of first order laterals was about7 laterals cm^-1 of main root. More than 50% of first order lateralshad diameters less than 0·05 cm, and more than 90% ofthem had lengths less than 5 cm. Calculations of axial resistancesbased on xylem diameter measurements suggest that the axialresistances of root segments may not be uniform along rootsas is often assumed in models of water uptake. Water flow intothe main roots via the lateral root pathway is likely to bemuch smaller than that via the direct radial flow pathway asonly about 1% of surface area of main roots is directly occupiedby lateral roots, leaving the other 99% of main root surfacearea available for the direct radial flow pathway.Copyright1994, 1999 Academic Press Axial resistance, grapevine (Vitis vinifera L. cv. Shiraz) roots, root diameter, root length, xylem vessels     

Root system architecture of Quercus pubescens trees growing on different sloping conditions

BACKGROUND AND AIMS: Plant roots' growth direction has important implications for plant development and survival; moreover it plays an effective and vital role in stabilizing weathered soil on a steep slope. The aim of this work was to assess the influence of slope on the architecture of woody root systems. METHODS: Five mature, single-stemmed Quercus pubescens trees growing on a steep slope and five on a shallow slope were excavated to a root diameter of 1 cm. A very precise numeric representation of the geometry and topology of structural root architecture was gained using a low-magnetic-field digitizing device (Fastrak, Polhemus). Several characteristics of root architecture were extracted by macros, including root volume, diameter, length, number, spatial position and branching order. KEY RESULTS: The diameter at breast height (dbh) was the best predictor of the root volume but had no correlation with length and number of roots. The slope affected the root volume for each branching order, and the basal cross-sectional area (CSA), number and length of the first-order roots. Number and length of the second- and third-order laterals were closely related in both conditions, although this relationship was closer in the shallow trees, suggesting the influence of a genetic control. Sloping trees showed a clustering tendency of the first- and second-order lateral roots in the up-slope direction, suggesting that the laterals rather than the taproots provide much of the anchorage. In a steep-slope condition, the taproot tapering was positively correlated with the asymmetry magnitude of first-order roots, indicating compensation between taproot and main lateral roots' clustering tendency. CONCLUSIONS: These results suggest that on a slope, on clayey soils, root asymmetry appears to be a consequence of several environmental factors such as inclination, shallow-slides and soil compactness. In addition, this adaptive growth seems to counteract the turning moment induced by the self-loading forces acting in slope conditions, and as a consequence improves the tree stability.     

An Experimental Investigation of the Resistance of Model Root Systems to Uprooting

The architecture of a tree root system may influence its abilityto withstand uprooting by wind loading. To determine how theroot branching pattern may alter the anchorage efficiency ofa tree, artificial model root systems with different topologiesand branching angles were built. The root systems were embeddedat various depths in wet sand and the pull-out resistance measured.A model to predict the uprooting resistance from the data collectedwas designed, allowing predictions of anchorage strength withregards to architecture. The dominant factors influencing pull-outresistance were the depth and length of roots in the soil. Themost efficient type of branching pattern predicted by the programwas one with an increased number of roots deep in the soil.The optimum branching angle most likely to resist pull-out isa vertical angle of 90° between a lateral and the main axis.The predicted mechanically optimal radial angle between a lateralbranch and its daughter is between 0 and 20°. Values ofbranching angle are compared with those measured in real woodyroot systems of European larch and Sitka spruce. Root architecture; root anchorage; pull-out resistance; windthrow; Picea sitchensis ; Larix decidua