Response of the cortex to the mitotic apparatus during polar body formation in the starfish oocyte of Asterina pectinifera

In order to understand the mechanism of unequal division, polar body formation was investigated using the oocytes of the starfish, Asterina pectinifera. Cortical actin filaments were quantitatively measured after staining the maturing oocytes with fluorescently labeled phalloidin using a computer and image-processing software. Before polar body formation, at first the actin filaments at the animal pole decreased and subsequently the animal pole bulged. On the other hand, actin filaments surrounding the animal pole increased gradually and made a cleavage furrow around the animal pole as the bulge grew. Then the furrow ingressed and finally a polar body formed. When the surface force was calculated according to the cell shape, the surface force decreased at the animal pole but the force at the contractile ring increased. When by micromanipulation the mitotic apparatus was detached and translocated to the cortex other than the animal pole, polar body formation occurred all over the cortex of the oocyte, which indicates that the response of the whole cortex to the mitotic apparatus is equal. These results indicate that the decrease in the actin filaments and surface force near the centrosome of the mitotic apparatus as well as the increase in the actin filaments and surface force at some distance of the centrosome is important for cytokinesis.     

Requirement of a cell division step for stalk formation in Caulobacter crescentus.

Penicillin G at low concentrations blocked cell division in Caulobacter crescentus without inhibiting cell growth. The long filamentous cells formed after two to three generations under these conditions had a stalk at one pole and usually one or more flagella at the opposite pole. The failure of the filaments to form a second stalk at the flagellated pole indicates that stalk formation was dependent upon completion of a step that was also required for cell division. Two observations support this conclusion. (i) Penicillin did not stop the normal development of synchronous swarmer cells into stalked initiation and stalk elongation. (ii) When the action of penicillin was reversed by the addition of penicillinase to cultures of filaments, stalks were not formed at the nonstalked pole until after cell division had occurred; thus the normal order of development events was maintained: cell division leads to stalk formation. These results are consistent with a model in which the organization of the developmental program for stalk formation occurs before cell division as a consequence of steps that branch from the cell division pathway.     

Multiple phosphorylation sites on the RegA phosphodiesterase regulate Dictyostelium development

In Dictyostelium, the intracellular cAMP-specific phosphodiesterase RegA is a negative regulator of cAMP-dependent protein kinase (PKA), a key determinant in the timing of developmental morphogenesis and spore formation. To assess the role of protein kinases in the regulation of RegA function, this study identified phosphorylation sites on RegA and characterized the role of these modifications through the analysis of phospho-mimetic and phospho-ablative mutations. Mutations affecting residue T676 of RegA, a presumed target of the atypical MAP kinase Erk2, altered the rate of development and impacted cell distribution in chimeric organisms suggesting that phosphorylation of this residue reduces RegA function and regulates cell localization during multicellular development. Mutations affecting the residue S142 of RegA also impacted the rate developmental morphogenesis but in a manner opposite of changes at T676 suggesting the phosphorylation of the S142 residue increases RegA function. Mutations affecting residue S413 residue altered aggregate sizes and delayed developmental progression suggesting that PKA operates in a negative feedback mechanism to increase RegA function. These results suggest that the phosphorylation of different residues on RegA can lead to increased or decreased RegA function and therefore in turn regulate developmental processes such as aggregate formation, cell distribution, and the kinetics of developmental morphogenesis.     

Mycobacterium tuberculosis CwsA Interacts with CrgA and Wag31, and the CrgA-CwsA Complex Is Involved in Peptidoglycan Synthesis and Cell Shape Determination

Bacterial cell division and cell wall synthesis are highly coordinated processes involving multiple proteins. Here, we show that Rv0008c, a novel small membrane protein from Mycobacterium tuberculosis, localizes to the poles and on membranes and shows an overall punctate localization throughout the cell. Furthermore, Rv0008c interacts with two proteins, CrgA and Wag31, implicated in peptidoglycan (PG) synthesis in mycobacteria. Deletion of the Rv0008c homolog in M. smegmatis, MSMEG_0023, caused bulged cell poles, formation of rounded cells, and defects in polar localization of Wag31 and cell wall synthesis, with cell wall synthesis measured by the incorporation of the [¹⁴C]N-acetylglucosamine cell wall precursor. The M. smegmatis MSMEG_0023 crgA double mutant strain showed severe defects in growth, viability, cell wall synthesis, cell shape, and the localization of the FtsZ, FtsI, and Wag31 proteins. The double mutant strain also exhibited increased autolytic activity in the presence of detergents. Because CrgA and Wag31 proteins interact with FtsI individually, we believe that regulated cell wall synthesis and cell shape maintenance require the concerted actions of the CrgA, Rv0008c, FtsI, and Wag31 proteins. We propose that, together, CrgA and Rv0008c, renamed CwsA for cell wall synthesis and cell shape protein A, play crucial roles in septal and polar PG synthesis and help coordinate these processes with the FtsZ-ring assembly in mycobacteria.     

Bacillus subtilis MreB orthologs self-organize into filamentous structures underneath the cell membrane in a heterologous cell system

Actin-like bacterial cytoskeletal element MreB has been shown to be essential for the maintenance of rod cell shape in many bacteria. MreB forms rapidly remodelling helical filaments underneath the cell membrane in Bacillus subtilis and in other bacterial cells, and co-localizes with its two paralogs, Mbl and MreBH. We show that MreB localizes as dynamic bundles of filaments underneath the cell membrane in Drosophila S2 Schneider cells, which become highly stable when the ATPase motif in MreB is modified. In agreement with ATP-dependent filament formation, the depletion of ATP in the cells lead to rapid dissociation of MreB filaments. Extended induction of MreB resulted in the formation of membrane protrusions, showing that like actin, MreB can exert force against the cell membrane. Mbl also formed membrane associated filaments, while MreBH formed filaments within the cytosol. When co-expressed, MreB, Mbl and MreBH built up mixed filaments underneath the cell membrane. Membrane protein RodZ localized to endosomes in S2 cells, but localized to the cell membrane when co-expressed with Mbl, showing that bacterial MreB/Mbl structures can recruit a protein to the cell membrane. Thus, MreB paralogs form a self-organizing and dynamic filamentous scaffold underneath the membrane that is able to recruit other proteins to the cell surface.     

Quantitative analysis of cortical actin filaments during polar body formation in starfish oocytes

Polar body formation is an extremely unequal cell division. In order to understand the mechanism of polar body formation, morphological changes at the animal pole were investigated in living oocytes of the starfish, Asterina pectinifera, and the amounts of cortical actin filaments were quantitatively estimated after staining the maturing oocytes with fluorescently-labeled phallotoxins using a computer and image-processing software. Formation of a bulge, which is presumed to become a polar body, and the anaphase separation of chromosomes occurred simultaneously. When the bulge became large, one group of chromatids moved into the bulge. The dividing furrow then formed and finally a polar body formed. Just at the time of bulge formation, the intensity of the fluorescence produced by the actin filaments at the top of the animal pole began to decrease, and subsequently the intensity at the top fell to half of the original value. On the other hand, the fluorescence intensity at the base of the bulge increased gradually. This actin accumulation at the base created a dividing furrow around the top of the animal pole as the bulge grew. Even when the polar body formation was inhibited mechanically, a similar pattern of actin deficiency and accumulation in the cortex near the animal pole was observed. This indicates that such regulation of filamentous actin can take place without bulging. Therefore, polar body formation is initiated by the bulging of the cortex weakened by actin deficiency and followed by contraction of the base of the bulge reinforced by actin accumulation.     

Mycobacterium tuberculosis Proteins Involved in Mycolic Acid Synthesis and Transport Localize Dynamically to the Old Growing Pole and Septum

Understanding the mechanism that controls space-time coordination of elongation and division of Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis (TB), is critical for fighting the tubercle bacillus. Most of the numerous enzymes involved in the synthesis of Mycolic acid - Arabinogalactan-Peptidoglycan complex (MAPc) in the cell wall are essential in vivo. Using a dynamic approach, we localized Mtb enzymes belonging to the fatty acid synthase-II (FAS-II) complexes and involved in mycolic acid (MA) biosynthesis in a mycobacterial model of Mtb: M. smegmatis. Results also showed that the MA transporter MmpL3 was present in the mycobacterial envelope and was specifically and dynamically accumulated at the poles and septa during bacterial growth. This localization was due to its C-terminal domain. Moreover, the FAS-II enzymes were co-localized at the poles and septum with Wag31, the protein responsible for the polar localization of mycobacterial peptidoglycan biosynthesis. The dynamic localization of FAS-II and of the MA transporter with Wag31, at the old-growing poles and at the septum suggests that the main components of the mycomembrane may potentially be synthesized at these precise foci. This finding highlights a major difference between mycobacteria and other rod-shaped bacteria studied to date. Based on the already known polar activities of envelope biosynthesis in mycobacteria, we propose the existence of complex polar machinery devoted to the biogenesis of the entire envelope. As a result, the mycobacterial pole would represent the Achilles'' heel of the bacillus at all its growing stages.     

<Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis> Antigen Wag31 Induces Expression of C-Chemokine XCL2 in Macrophages

Tuberculosis is still a major threat to human health. To date, only approximately half of the proteins encoded by Mycobacterium tuberculosis H37Rv have been assigned specific functions. Wag31 (Rv2145c) is one of the bacterial proteins whose function is mostly unknown. Using a modified split-ubiquitin membrane yeast two-hybrid system, we screened a macrophage cDNA library with Wag31 as bait and identified XCL2, a C-subfamily chemokine, as a binding partner for Wag31. More importantly, Wag31 was found to specifically stimulate XCL2 expression in macrophages. The results from this study demonstrate that expression of C-chemokine is not restricted to certain types of T cells and natural killer cells. Because C-chemokine is chemotactic for CD8+ and CD4+ T cells, our novel findings could provide a new mechanism by which the bacteria induce cell-mediated immunity and by which Wag31 could be a potential target for controlling M. tuberculosis infection.     

Role of the beta4Thr-beta73Asp hydrogen bond in HbS polymer and domain formation from multinucleate-containing clusters

Fiber formation and domain formation from deoxy-HbS as well as from beta4 and beta73 HbS variants were investigated after temperature jump using DIC microscopy to gain a basic understanding of the determinants involved. Oversaturated deoxy-HbS generated numerous 14-stranded fibers and formed ovoid-shaped, multispherulitic domains. Domain number increased linearly as a function of time. Oversaturated deoxy-alpha2beta2(E6V,T4S) also generated time-dependent, ovoid-shaped spherulitic domains like HbS and alpha 2beta2(E6V,D73H) in the deoxy form. In contrast, alpha 2beta2(E6V,T4Y) and HbC-Harlem (alpha2beta2(E6V,D73N)) in the deoxy form generated time-dependent, ball-shaped domains containing many straight, crystalline-like fibers without evidence of branching. Some of these domains formed large needlelike crystals after overnight incubation. The inhibitory effect on polymer formation by beta4Tyr in HbS was stronger than that by beta4Ser but weaker than that by beta73Asn or beta73Leu. In contrast, both deoxy- and oxy-alpha2beta2(E6V,T4V) promoted formation of tiny, disordered amorphous aggregates without a delay time like oxy-HbS, which is in contrast to formation after a delay time of needlelike fibers for alpha 2beta2(E6V,D73L). Solubilities for both deoxy- and oxy-alpha 2beta2(E6V,T4V) were similar to that of deoxy-alpha 2beta2(E6V,D73H) but approximately 10-fold lower than that of deoxy-HbS. These results suggest that the strength of the hydrogen bond between beta4Thr and beta73Asp and the balance between the hydrogen bond and beta6Val hydrophobic interactions in deoxy-HbS polymers control formation of different types of fibers in a single domain or lead to formation of disordered, non-nucleated amorphous aggregates. These results also lead to a model in which multinucleation rather than a single-nucleation event occurs in a single cluster to generate numerous fibers growing from a single domain.     

Characterization of mesoscale coiled-coil peptide-porphyrin complexes

Photoelectronically conductive self-assembling peptide-porphyrin assemblies have great potential in their use as biomaterials, owing largely to their environmentally responsive properties. We have successfully designed a coiled-coil peptide that can self-assemble to form mesoscale filaments and serve as a scaffold for porphyrin interaction. In our earlier work, peptide-porphyrin-based biomaterials were formed at neutral pH, but the structures were irregular at the nano- to microscale size range, as judged by atomic force microscopy. We identified a pH in which mesoscale fibrils were formed, taking advantage of the types of porphyrin interactions that are present in well-characterized J-aggregates. We used UV-visible spectroscopy, circular dichroism spectropolarimetry, fluorescence spectroscopy, and atomic force microscopy to characterize these self-assembling biomaterials. We propose a new assembly paradigm that arises from a set of unique porphyrin-porphyrin and porphyrin-peptide interactions whose structure may be readily modulated by changes in pH or peptide concentration.     

Novel role of Wag31 in protection of mycobacteria under oxidative stress

Wag31 of Mycobacterium tuberculosis belongs to the DivIVA family of proteins known to regulate cell morphology in Gram-positive bacteria. Here we demonstrate an unrecognized, novel role of Wag31 in oxidatively stressed mycobacteria. We report the cleavage of penicillin-binding protein 3 (PBP3) by the intramembrane metalloprotease Rv2869c (MSMEG_2579) in oxidatively stressed cells. Amino acids ¹⁰²A and ¹⁰³A of PBP3 are required for Rv2869c-mediated cleavage. Wag31_MTB, by virtue of its interaction with PBP3 through amino acid residues ⁴⁶NSD⁴⁸, protects it from oxidative stress-induced cleavage. PBP3 undergoes cleavage in Mycobacterium smegmatis (strain PM2) harbouring wag31 (Δ⁴⁶NSD⁴⁸) instead of the wild type, with concomitant reduction in ability to withstand oxidative stress. Overexpression of Wag31(Δ⁴⁶NSD⁴⁸) attenuates the survival of M. tuberculosis in macrophages with concomitant cleavage of PBP3, and renders the organism more susceptible towards hydrogen peroxide as well as drugs which generate reactive oxygen species, namely isoniazid and ofloxacin. We propose that targeting Wag31 could enhance the activity of mycobactericidal drugs which are known to generate reactive oxygen species.     

Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin- binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin- binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.     

Characterization of mutant p53-hsp72/73 protein-protein complexes by transient expression in monkey COS cells.

Several mutant, but not wild-type, p53 proteins form complexes with hsp72/73 heat shock-related proteins in simian virus 40-transformed monkey COS cells. We carried out a detailed biochemical and structural mapping analysis of p53 and report here that p53-hsp72/73 complex formation showed considerable structural specificity. Such complexes were remarkably stable, but unlike analogous complexes formed between p53 and simian virus 40 T antigen, they did not form in in vitro association assays. p53-hsp72/73 complex formation in vivo appears to be dependent on aspects of mutant p53 protein conformation. However, absence of the conformation-sensitive epitope recognized by monoclonal antibody PAb 246 was not reliably diagnostic of such complexes, nor was p53-hsp72173 binding reliably diagnostic of oncogenic activation.     

Visualization of recA protein and its association with DNA: a priming effect of single-strand-binding protein

A stoichiometric interaction of RecA protein with single-stranded DNA promotes homologous pairing of the single strand with duplex DNA and subsequent polar formation of a heteroduplex joint. Escherichia coli single-strand-binding (SSB) protein augments these reactions. Electron microscopic observations suggest structural bases for these interactions. Without triphosphates or DNA, RecA protein forms short linear filaments. With added circular single-stranded DNA, it forms extended circular filaments as well as collapsed and aggregated complexes of protein and DNA. The extended circular filaments are stiff and regular in appearance, contrasting with the convoluted structure formed by SSB protein and single-stranded DNA. Together, these two proteins form mixed filaments, which mostly resemble the extended structures containing RecA protein; moreover, SSB protein accelerates formation of extended filaments more than 50-fold, increasing the yield of these structures at the expense of heterogeneous aggregates. Other observations further define the interactions of RecA protein with partially single-stranded DNA, and the effects of ATP gamma S on the tendency of RecA protein to form polymeric structures even in the absence of DNA.     

Critical contact residues that mediate polymerization of nematode major sperm protein

The polymerization of protein filaments provides the motive force in a variety of cellular processes involving cell motility and intracellular transport. Regulated assembly and disassembly of the major sperm protein (MSP) underlies amoeboid movement in nematode sperm, and offers an attractive model system for characterizing the biomechanical properties of filament formation and force generation. To that end, structure-function studies of MSP from the nematode Caenorhabditis elegans have been performed. Recombinant MSP was purified from Escherichia coli using a novel affinity chromatography technique, and filament assembly was assessed by in vitro polymerization in the presence of polyethylene glycol. Prior molecular studies and structure from X-ray crystallography have implicated specific residues in protein-protein interactions necessary for filament assembly. Purified MSP containing substitutions in these residues fails to form filaments in vitro. Short peptides based on predicted sites of interaction also effectively disrupt MSP polymerization. These results confirm the structural determination of intermolecular contacts and demonstrate the importance of these residues in MSP assembly.     

Higher order oligomerization is required for H-NS family member MvaT to form gene-silencing nucleoprotein filament

MvaT from Pseudomonas aeruginosa is a member of the histone-like nucleoid structuring protein (H-NS) family of nucleoid-associated proteins widely spread among Gram-negative bacteria that functions to repress the expression of many genes. Recently, it was reported that H-NS from Escherichia coli can form rigid nucleoproteins filaments on DNA, which are important for their gene-silencing function. This raises a question whether the gene-silencing function of MvaT, which has only ∼18% sequence similarity to H-NS, is also based on the formation of nucleoprotein filaments. Here, using magnetic tweezers and atomic force microscopy imaging, we demonstrate that MvaT binds to DNA through cooperative polymerization to form a nucleoprotein filament that can further organize DNA into hairpins or higher-order compact structures. Furthermore, we studied DNA binding by MvaT mutants that fail to repress gene expression in P. aeruginosa because they are specifically defective for higher-order oligomer formation. We found that, although the mutants can organize DNA into compact structures, they fail to form rigid nucleoprotein filaments. Our findings suggest that higher-order oligomerization of MvaT is required for the formation of rigid nucleoprotein filaments that silence at least some target genes in P. aeruginosa. Further, our findings suggest that formation of nucleoprotein filaments provide a general structural basis for the gene-silencing H-NS family members.     

Cortical differentiation of the animal pole during maturation division in fertilized eggs of Tubifex (Annelida,Oligochaeta): I. Meiotic apparatus formation

The fine structure of the animal pole cortex is examined in the fertilized Tubifex egg undergoing the formation of the second meiotic apparatus (MA). The fully formed MA which orients its axis at right angles to the surface is found at the animal pole about 40 min after formation of the first polar body. It is composed of a spindle and asters at its poles; a centriole is found in the inner aster, but not in the peripheral aster adjacent to the surface. During the formation of the MA, the animal pole surface is lined with a 0.15-μm-thick, electron-dense cortical layer, which is rich in microfilaments. The arrangement of the filaments in the layer changes from a parallel array to a meshwork with progressive formation of the MA. Microtubules of the peripheral aster terminate in the cortical layer. When a jet stream of glycerol/dimethyl sulfoxide solution is applied to an egg fragment glued on a polylysine-coated coverslip, an egg cortex-MA complex is isolated on the coverslip; the MA appears to be tethered to the egg surface by the structural connection between the filamentous cortical layer and microtubules of the peripheral aster. Cytochalasin B (50 μg/ml), when administrated at early phase of the MA formation, does not show any effect on the structure of the cortical layer and the MA; however, if eggs shortly before the termination of the first polar body formation are immersed in the same test solution, the cortical layer of the animal pole becomes thinner, and the filamentous material is not observed in it. Furthermore, in these eggs, the peripheral aster and the spindle are not structurally discernible because of the suppression of microtubule assembly, whereas microtubules on kinetochores and in the inner aster are normally developed. These results are discussed in relation to the role of the animal pole cortex in fixing of the MA to the egg surface and in forming of the MA.     

Phosphorylation-induced conformational switching of CPI-17 produces a potent myosin phosphatase inhibitor

Phosphorylation of endogenous inhibitor proteins for type-1 Ser/Thr phosphatase (PP1) provides a mechanism for reciprocal coordination of kinase and phosphatase activities. A myosin phosphatase inhibitor protein CPI-17 is phosphorylated at Thr38 through G-protein-mediated signals, resulting in a >1000-fold increase in inhibitory potency. We show here the solution NMR structure of phospho-T38-CPI-17 with rmsd of 0.36 +/- 0.06 A for the backbone secondary structure, which reveals how phosphorylation triggers a conformational change and exposes an inhibitory surface. This active conformation is stabilized by the formation of a hydrophobic core of intercalated side chains, which is not formed in a phospho-mimetic D38 form of CPI-17. Thus, the profound increase in potency of CPI-17 arises from phosphorylation, conformational change, and hydrophobic stabilization of a rigid structure that poses the phosphorylated residue on the protein surface and restricts its hydrolysis by myosin phosphatase. Our results provide structural insights into transduction of kinase signals by PP1 inhibitor proteins.     

Physical integrity of smooth muscle myosin filaments is enhanced by phosphorylation of the regulatory myosin light chain.

BACKGROUND AND AIMS: Smooth muscle myosin monomers self-assemble in solution to form filaments. Phosphorylation of the 20-kD regulatory myosin light chain (MLC20) enhances filament formation. It is not known whether the phosphorylated and non-phosphorylated filaments possess the same structural integrity. METHODS: We purified myosin from bovine trachealis to form filaments, in ATP-containing zero-calcium solution during a slow dialysis that gradually reduced the ionic strength. Sufficient myosin light chain kinase and phosphatase, as well as calmodulin, were retained after the myosin purification and this enabled phosphorylation of MLC20 within 20-40s after addition of calcium to the filament suspension. The phosphorylated and non-phosphorylated filaments were then partially disassembled by ultrasonification. The extent of filament disintegration was visualized and quantified by atomic force microscopy. RESULTS: MLC20 phosphorylation reduced the diameter of the filaments and rendered the filaments more resistant to ultrasonic agitation. Electron microscopy revealed a similar reduction in filament diameter in intact smooth muscle when the cells were activated. CONCLUSION: Modification of the structural and physical properties of myosin filaments by MLC20 phosphorylation may be a key regulation step in smooth muscle where formation and dissolution of the filaments are required in the cells' adaptation to different cell length.     

Isopeptide bonds of the major pilin protein BcpA influence pilus structure and bundle formation on the surface of Bacillus cereus

Bacillus cereus strains elaborate pili on their surface using a mechanism of sortase-mediated cross-linking of major and minor pilus components. Here we used a combination of electron microscopy and atomic force microscopy to visualize these structures. Pili occur as single, double or higher order assemblies of filaments formed from monomers of the major pilin, BcpA, capped by the minor pilin, BcpB. Previous studies demonstrated that within assembled pili, four domains of BcpA - CNA(1), CNA(2), XNA and CNA(3) - each acquire intramolecular lysine-asparagine isopeptide bonds formed via catalytic glutamic acid or aspartic acid residues. Here we showed that mutants unable to form the intramolecular isopeptide bonds in the CNA(2) or CNA(3) domains retain the ability to form pilus bundles. A mutant lacking the CNA(1) isopeptide bond assembled deformed pilin subunits that failed to associate as bundles. X-ray crystallography revealed that the BcpA variant Asp(312) Ala, lacking an aspartyl catalyst, did not generate the isopeptide bond within the jelly-roll structure of XNA. The Asp(312) Ala mutant was also unable to form bundles and promoted the assembly of deformed pili. Thus, structural integrity of the CNA(1) and XNA domains are determinants for the association of pili into higher order bundle structures and determine native pilus structure.