lep operon proximal gene is not required for growth or secretion by Escherichia coli.

Leader peptidase is an essential enzyme of Escherichia coli and is required for protein export. The structural gene for leader peptidase (lep) is separated from its promoter by an upstream gene of unknown function (lepA). The gene lepA was shown by the use of minicell analysis and overproduction to encode a protein of 74,000 daltons. To determine whether this 74,000-dalton protein functions in protein export, a mutant of E. coli H560 was constructed which has a 1.5-kilobase-pair deletion in the lepA gene. The lepA deletion mutant had no apparent defect for growth or protein export, indicating that lepA is nonessential and that the two cotranscribed genes lepA and lep probably have unrelated functions.     

Identification of arginine residues important for the activity of Escherichia coli signal peptidase I

Escherichia coil signal peptidase I (leader peptidase, SPase I) is an integral membrane serine protease that catalyzes the cleavage of signal (leader) peptides from pre-forms of membrane or secretory proteins. We previously demonstrated that E. coil SPase I was significantly inactivated by reaction with phenylglyoxal with concomitant modification of three to four of the total 17 arginine residues in the enzyme. This result indicated that several arginine residues are important for the optimal activity of the enzyme. In the present study, we have constructed 17 mutants of the enzyme by site-directed mutagenesis to investigate the role of individual arginine residues in the enzyme. Mutation of Arg127, Arg146, Arg198, Arg199, Arg226, Arg236, Arg275, Arg282, and Arg295 scarcely affected the enzyme activity in vivo and in vitro. However, the enzymatic activity toward a synthetic substrate was significantly decreased by replacements of Arg77, Arg222, Arg315, or Arg318 with alanine/lysine. The kcat values of the R77A, R77K, R222A, R222K, R315A, R318A, and R318K mutant enzymes were about 5.5-fold smaller than that of the wild-type enzyme, whereas the Km values of these mutant enzymes were almost identical with that of the wild-type. Moreover, the complementing abilities in E. Arg222, Arg315, coil IT41 were lost completely when Arg77, or Arg318 was replaced with alanine/lysine. The circular dichroism spectra and other enzymatic properties of these mutants were comparable to those of the wild-type enzyme, indicating no global conformational changes. However, the thermostability of R222A, R222K, R315A, and R318K was significantly lower compared to the wild type. Therefore, Arg77, Arg222, Arg315, and Arg318 are thought to be important for maintaining the proper and stable conformation of SPase I.     

Expression study with the Escherichia coli lep gene for leader peptidase in phototrophic purple bacteria

Synthesis and assembly of leader peptidase of Escherichia coli (signal peptidase I), was studied by heterologous expression of its lep gene in three species of phototrophic purple bacteria. Cell extracts of the recipient species showed neither cross reaction with antibodies against E. coli leader peptidase nor cleavage of the model substrate M13-procoat in vitro. The lep gene was transferred via conjugation using the plasmid expression vector for phototrophic bacteria pJAJ9. Plasmidborne leader peptidase enzyme was identified by immunochemical means. However, extracts of transconjugant cells showed no cleavage function. Trypsin digestion studies revealed that the enzyme was not properly integrated across the host membranes. The data suggest that cleaving enzymes for protein export and/or their assembly pathway in purple bacteria differ from the E. coli type.Abbreviations DMSO dimethylsulfoxide - EDTA ethylenediamine tetraacetic acid - PAGE polyacrylamide gel electrophoresis - PMSF phenylmethylsulfonyl fluoride - SDS sodium dodecyl sulfate     

Minimum substrate sequence for signal peptidase I of Escherichia coli

The minimum substrate sequence recognized by signal peptidase I (SPase I or leader peptidase) was defined by measuring the kinetic parameters for a set of chemically synthesized peptides corresponding to the cleavage site of the precursor maltose binding protein (pro-MBP). The minimum sequence of a substrate hydrolyzed by SPase I at a measurable rate was the pentapeptide Ala-Leu-Ala decreases Lys-Ile. The rates of hydrolysis of this substrate, however, were several hundred-fold lower than those observed for the maturation of MBP in Escherichia coli, suggesting that in addition to these minimal sites involved in recognition, other features of pro-MBP are also needed for the optimal rate of signal peptide cleavage by SPase I. One parameter may be the length of the polypeptide chain. Studies of the synthetic peptides showed that decreasing the length of the polypeptide chain of substrates decreased the substrate efficiency measured as kcat/Km. However, in one case a decrease in the length of a peptide corresponding to -7 to +3 positions of pro-MBP to a nonapeptide (-7 to +2) increased the substrate efficiency by about 900-fold. The nonapeptide is the most efficient substrate for the enzyme in vitro so far reported. It is speculated that better peptide substrates are the ones which are able to adopt folded structures.     

Characterization of the sppA gene coding for protease IV, a signal peptide peptidase of Escherichia coli.

The sppA gene codes for protease IV, a signal peptide peptidase of Escherichia coli. Using the gene cloned on a plasmid, we constructed an E. coli strain carrying the ampicillin resistance gene near the chromosomal sppA gene and an sppA deletion strain in which the deleted portion was replaced by the kanamycin resistance gene. Using these strains, we mapped the sppA gene at 38.5 min on the chromosome, the gene order being katE-xthA-sppA-pncA. Although digestion of the signal peptide that accumulated in the cell envelope fraction was considerably slower in the deletion mutant than in the sppA+ strain, it was still significant, suggesting the participation of another envelope protease(s) in signal peptide digestion.     

Genetic mapping of the Escherichia coli leader (signal) peptidase gene (lep): a new approach for determining the map position of a cloned gene.

The gene for leader peptidase, termed lep, was mapped to the region between purI and nadB at min 54 to 55 on the Escherichia coli chromosome. Mapping involved (i) cloning the gene into the plasmid pBR322, (ii) transforming the plasmid into a polA strain where it cannot replicate autonomously, (iii) selecting by ampicillin resistance the rare cell in which the plasmid had recombined into the chromosome, and (iv) mapping the chromosomal site of drug resistance (and thus plasmid integration) by Hfr matings and P1 transduction. The map position was confirmed by an assay of the enzyme content of cells bearing an F' factor which covered that region of the chromosome.     

Membrane topology of Escherichia coli prolipoprotein signal peptidase (signal peptidase II)

The lsp gene of Escherichia coli encodes the inner membrane enzyme, signal peptidase II (SPase II). SPase II is comprised of 164 amino acid residues and contains four hydrophobic domains. A series of lsp-phoA and lsp-lacZ gene fusions have been constructed in vitro to determine the topology of SPase II. The fusion junction for each of these gene fusions was determined by DNA sequencing. The lengths of the SPase II fragment in the fusions varied from 12 to 159 amino acid residues. Strains containing SPase II-PhoA fusions to the two predicted periplasmic loops exhibited higher levels of alkaline phosphatase activity than fusions to the predicted cytoplasmic domains. In contrast, SPase II-LacZ fusions at the cytoplasmic and the periplasmic domains of SPase II showed high and low levels of beta-galactosidase activity, respectively, a result opposite to those shown by SPase II-PhoA fusions located at precisely the same amino acid of SPase II. Taken together, these results strongly support the predicted model for SPase II topology, i.e. this enzyme spans the cytoplasmic membrane four times with both the amino and the carboxyl termini facing the cytoplasm.     

Genetic characterization of a gene for prolipoprotein signal peptidase in Escherichia coli

A mutation (lspA, prolipoprotein signal peptidase) rendering the prolipoprotein signal peptidase temperature-sensitive in Escherichia coli has been analyzed. The mutation was mapped in the dnaJ-rpsT-ileS-dapB region by interrupted mating with various Hfr strains and P1 phage transduction. lambda transducing phage lambda ddapB2 that carries the rpsT-ileS-dapB region was shown to complement the lspA mutation. Plasmid pLC3-13 which had been isolated from Clarke and Carbon's collection as a plasmid carrying the lspA locus was shown to carry the dnaJ and rpsT loci. Complementation analysis with plasmids carrying various DNA fragments derived from pLC3-13 showed that the lspA locus is between the rpsT and ileS loci. The wildtype allele was dominant over the lspA allele.     

Secondary promoter of the guanine operon of Escherichia coli K-12.

Evidence of a secondary promoter for the guaA gene within the guaB gene was obtained by using lambdapguaA transducing phage. The technique is generally applicable to distinguish a promoter present within a bacterial deoxyribonucleic acid segment, which has replaced the lambda b2 region of transducing phage, from the phage pI promoter.     

Cloning and expression of a gene coding for the prolipoprotein signal peptidase of Escherichia coli

An Escherichia coli mutant, Y815, has a temperature-sensitive prolipoprotein signal peptidase. IPTG-induced synthesis of the major outer membrane prolipoprotein (PLP) results in the inhibition of cell growth because of accumulation of PLP in its envelope [J. Bacteriol. (1982) 152, 1163-1168]. The 2000 E. coli strains of Clarke and Carbon's collection were screened for the presence of a plasmid complementing the IPTG-sensitivity of the growth of Y815. One plasmid, pLC3-13, complemented the IPTG-sensitivity. The envelope fraction prepared from Y815 transformed by pLC3-13 showed high activity of the PLP signal peptidase in vitro at high temperature. A 4 kb AccI fragment subcloned onto plasmid pHY001 was shown to carry the gene for the PLP signal peptidase.