Chemical shift mapping of γδ resolvase dimer and activated tetramer: Mechanistic implications for DNA strand exchange

Several static structural models exist for γδ resolvase, a self-coded DNA recombinase of the γδ transposon. While these reports are invaluable to formulation of a mechanistic hypothesis for DNA strand exchange, several questions remain. Foremost among them concerns the protomer structural dynamics within the protein/DNA synaptosome. Solution NMR chemical shift assignments have been made for truncated variants of the natural wild-type dimer, which is inactive without the full synaptosome structure, and a mutationally activated tetramer. Of the 134 residues, backbone ¹H, ¹⁵N, and ¹³Cα assignments are made for 121–124 residues in the dimer, but only 76–80 residues of the tetramer. These assignment differences are interpreted by comparison to X-ray diffraction models of the recombinase dimer and tetramer. Inspection of intramolecular and intermolecular structural variation between these models suggests a correspondence between sequence regions at subunit interfaces unique to tetramer, and the regions that can be sequentially assigned in the dimer but not the tetramer. The loss of sequential context for assignment is suggestive of stochastic fluctuation between structural states involving protomer–protomer interactions exclusive to the activated tetrameric state, and may be indicative of dynamics which pertain to the recombinase mechanism.     

Regulatory mutations in Sin recombinase support a structure-based model of the synaptosome

The resolvase Sin regulates DNA strand exchange by assembling an elaborate interwound synaptosome containing catalytic and regulatory Sin tetramers, and an architectural DNA-bending protein. The crystal structure of the regulatory tetramer was recently solved, providing new insights into the structural basis for regulation. Here we describe the selection and characterization of two classes of Sin mutations that, respectively, bypass or disrupt the functions of the regulatory tetramer. Activating mutations, which allow the catalytic tetramer to assemble and function independently at site I (the crossover site), were found at ∼20% of residues in the N-terminal domain. The most strongly activating mutation (Q115R) stabilized a catalytically active synaptic tetramer in vitro . The positions of these mutations suggest that they act by destabilizing the conformation of the ground-state site I-bound dimers, or by stabilizing the altered conformation of the active catalytic tetramer. Mutations that block activation by the regulatory tetramer mapped to just two residues, F52 and R54, supporting a functional role for a previously reported crystallographic dimer–dimer interface. We suggest how F52/R54 contacts between regulatory and catalytic subunits might promote assembly of the active catalytic tetramer within the synaptosome.     

Tetrameric structure of a serine integrase catalytic domain

The serine integrases have recently emerged as powerful new chromosome engineering tools in various organisms and show promise for therapeutic use in human cells. The serine integrases are structurally and mechanistically unrelated to the bacteriophage lambda integrase but share a similar catalytic domain with the resolvase/invertase enzymes typified by the resolvase proteins from transposons Tn3 and gammadelta. Here we report the crystal structure and solution properties of the catalytic domain from bacteriophage TP901-1 integrase. The protein is a dimer in solution but crystallizes as a tetramer that is closely related in overall architecture to structures of activated gammadelta-resolvase mutants. The ability of the integrase tetramer to explain biochemical experiments performed in the resolvase and invertase systems suggests that the TP901 integrase tetramer represents a unique intermediate on the recombination pathway that is shared within the serine recombinase superfamily.     

Controlling tetramer formation,subunit rotation and DNA ligation during Hin-catalyzed DNA inversion

Two critical steps controlling serine recombinase activity are the remodeling of dimers into the chemically active synaptic tetramer and the regulation of subunit rotation during DNA exchange. We identify a set of hydrophobic residues within the oligomerization helix that controls these steps by the Hin DNA invertase. Phe105 and Met109 insert into hydrophobic pockets within the catalytic domain of the same subunit to stabilize the inactive dimer conformation. These rotate out of the catalytic domain in the dimer and into the subunit rotation interface of the tetramer. About half of residue 105 and 109 substitutions gain the ability to generate stable synaptic tetramers and/or promote DNA chemistry without activation by the Fis/enhancer element. Phe106 replaces Phe105 in the catalytic domain pocket to stabilize the tetramer conformation. Significantly, many of the residue 105 and 109 substitutions support subunit rotation but impair ligation, implying a defect in rotational pausing at the tetrameric conformer poised for ligation. We propose that a ratchet-like surface involving Phe105, Met109 and Leu112 within the rotation interface functions to gate the subunit rotation reaction. Hydrophobic residues are present in analogous positions in other serine recombinases and likely perform similar functions.     

Solution structure of the Tn3 resolvase-crossover site synaptic complex

Tn3 resolvase is a site-specific DNA recombinase, which catalyzes strand exchange in a synaptic complex containing twelve resolvase subunits and two res sites. Hyperactive mutants of resolvase can form a simpler complex (X synapse) containing a resolvase tetramer and two shorter DNA segments at which strand exchange takes place (site I). We have solved the low-resolution solution structure of the purified, catalytically competent X synapse from small-angle neutron and X-ray scattering data, using methods in which the data are fitted with models constructed by rigid body transformations of a published crystallographic structure of a resolvase dimer bound to site I. Our analysis reveals that the two site I fragments are on the outside of a resolvase tetramer core and provides some information on the quaternary structure of the tetramer. We discuss implications of our structure for the architecture of the natural synaptic complex and the mechanism of strand exchange.     

Theoretical study of structural transition in a nucleosome at low ionic strength

The theoretical analysis of nucleosome stability at low ionic strength has been performed on the basis of consideration of different contributions to the free energy of compact state of the nucleosome DNA terminal regions. The proposed model explains: the fact of low-salt structural change; the transition point (approximately 1.7 mM NaCl) and width (approximately 1 mM); the shift of the transition to the higher salt concentrations in the case of histones tails removal by trypsin. According to the model the increase of electrostatic repulsion between neighbouring turns of DNA superhelix is the main cause of the unwinding of nucleosomal DNA terminal regions in the course of low-salt structural change. The interactions between histone (H2A-H2B) dimer and (H3-H4)2 tetramer provide the compact state of the nucleosomal DNA terminal regions. The existence of electrostatic interactions of nucleosomal DNA terminal regions with tetramer was suggested. These interactions can provide the compact state of nucleosomal DNA at physiological ionic strength even in the absence of (H2A-H2B) dimer.     

Molecular modelling of miraculin: Structural analyses and functional hypotheses

Miraculin is a plant protein that displays the peculiar property of modifying taste by swiching sour into a sweet taste. Its monomer is flavourless at all pH as well as at high concentration; the dimer form elicits its taste-modifying activity at acidic pH; a tetrameric form is also reported as active. Two histidine residues, located in exposed regions, are the main responsible of miraculin activity, as demonstrated by mutagenesis studies. Since structural data of miraculin are not available, we have predicted its three-dimensional structure and simulated both its dimer and tetramer forms by comparative modelling and molecular docking techniques. Finally, molecular dynamics simulations at different pH conditions have indicated that at acidic pH the dimer assumes a widely open conformation, in agreement with the hypotheses coming from other studies.     

Intermediates in serine recombinase-mediated site-specific recombination

Site-specific recombinases are enzymes that promote precise rearrangements of DNA sequences. They do this by cutting and rejoining the DNA strands at specific positions within a pair of target sites recognized and bound by the recombinase. One group of these enzymes, the serine recombinases, initiates strand exchange by making double-strand breaks in the DNA of the two sites, in an intermediate built around a catalytic tetramer of recombinase subunits. However, these catalytic steps are only the culmination of a complex pathway that begins when recombinase subunits recognize and bind to their target sites as dimers. To form the tetramer-containing reaction intermediate, two dimer-bound sites are brought together by protein dimer-dimer interactions. During or after this initial synapsis step, the recombinase subunit and tetramer conformations change dramatically by repositioning of component subdomains, bringing about a transformation of the enzyme from an inactive to an active configuration. In natural serine recombinase systems, these steps are subject to elaborate regulatory mechanisms in order to ensure that cleavage and rejoining of DNA strands only happen when and where they should, but we and others have identified recombinase mutants that have lost dependence on this regulation, thus facilitating the study of the basic steps leading to catalysis. We describe how our studies on activated mutants of two serine recombinases, Tn3 resolvase and Sin, are providing us with insights into the structural changes that occur before catalysis of strand exchange, and how these steps in the reaction pathway are regulated.     

The molecular mechanism for the tetrameric association of glycogen phosphorylase promoted by protein phosphorylation.

The allosteric transition of glycogen phosphorylase promoted by protein phosphorylation is accompanied by the association of a pair of functional dimers to form a tetramer. The conformational changes within the dimer that lead to the creation of a protein recognition surface have been analyzed from a comparison of the crystal structures of T-state dimeric phosphorylase b and R-state tetrameric phosphorylase a. Regions of the structure that participate in the tetramer interface are situated within structural subdomains. These include the glycogen storage subdomain, the C-terminal subdomain and the tower helix. The subdomains undergo concerted conformational transitions on conversion from the T to the R state (overall r.m.s. shifts between 1 and 1.7 A) and, together with the quaternary conformational change within the functional dimer, create the tetramer interface. The glycogen storage subdomain and the C-terminal subdomain are distinct from those regions that contribute to the dimer interface, but shifts in the subdomains are correlated with the allosteric transitions that are mediated by the dimer interface. The structural properties of the tetramer interface are atypical of an oligomeric protein interface and are more similar to protein recognition surfaces observed in protease inhibitors and antibody-protein antigen complexes. There is a preponderance of polar and charged residues at the tetramer interface and a high number of H-bonds per surface area (one H-bond per 130 A2). In addition, the surface area made inaccessible at the interface is relatively small (1,142 A2 per subunit on dimer to tetramer association compared with 2,217 A2 per subunit on monomer-to-dimer association).     

Solution structure of the catalytic domain of gammadelta resolvase. Implications for the mechanism of catalysis

The site-specific DNA recombinase, gammadelta resolvase, from Escherichia coli catalyzes recombination of res site-containing plasmid DNA to two catenated circular DNA products. The catalytic domain (residues 1-105), lacking a C-terminal dimerization interface, has been constructed and the NMR solution structure of the monomer determined. The RMSD of the NMR conformers for residues 2-92 excluding residues 37-45 and 64-73 is 0.41 A for backbone atoms and 0.88 A for all heavy atoms. The NMR solution structure of the monomeric catalytic domain (residues 1-105) was found to be formed by a four-stranded parallel beta-sheet surrounded by three helices. The catalytic domain (residues 1-105), deficient in the C-terminal dimerization domain, was monomeric at high salt concentration, but displayed unexpected dimerization at lower ionic strength. The unique solution dimerization interface at low ionic strength was mapped by NMR. With respect to previous crystal structures of the dimeric catalytic domain (residues 1-140), differences in the average conformation of active-site residues were found at loop 1 containing the catalytic S10 nucleophile, the beta1 strand containing R8, and at loop 3 containing D67, R68 and R71, which are required for catalysis. The active-site loops display high-frequency and conformational backbone dynamics and are less well defined than the secondary structures. In the solution structure, the D67 side-chain is proximal to the S10 side-chain making the D67 carboxylate group a candidate for activation of S10 through general base catalysis. Four conserved Arg residues can function in the activation of the phosphodiester for nucleophilic attack by the S10 hydroxyl group. A mechanism for covalent catalysis by this class of recombinases is proposed that may be related to dimer interface dissociation.     

The architecture of the gammadelta resolvase crossover site synaptic complex revealed by using constrained DNA substrates

Activated mutants of the serine recombinase, gammadelta resolvase, form a simplified recombinogenic synaptic complex containing a tetramer of resolvase and two crossover sites. We have probed the architecture of this complex by measuring the efficiency of recombination of a series of constrained DNA substrates (with phased recombination sites separated by an IHF-induced U-turn); this serves as a direct report on the topology of a productive synapse. Our data show that in the active complex, the catalytic domains from two resolvase dimers form a central core, while the DNA binding domains and the DNA lie on the outside. In addition, the crossover sites cross one another to form a local positive node. The implications of our data for the mechanism of strand exchange and the process of resolvase activation are discussed.     

Structure and dynamics of human vimentin intermediate filament dimer and tetramer in explicit and implicit solvent models

Intermediate filaments, in addition to microtubules and microfilaments, are one of the three major components of the cytoskeleton in eukaryotic cells, and play an important role in mechanotransduction as well as in providing mechanical stability to cells at large stretch. The molecular structures, mechanical and dynamical properties of the intermediate filament basic building blocks, the dimer and the tetramer, however, have remained elusive due to persistent experimental challenges owing to the large size and fibrillar geometry of this protein. We have recently reported an atomistic-level model of the human vimentin dimer and tetramer, obtained through a bottom-up approach based on structural optimization via molecular simulation based on an implicit solvent model (Qin et al. in PLoS ONE 2009 4(10):e7294, 9). Here we present extensive simulations and structural analyses of the model based on ultra large-scale atomistic-level simulations in an explicit solvent model, with system sizes exceeding 500,000 atoms and simulations carried out at 20 ns time-scales. We report a detailed comparison of the structural and dynamical behavior of this large biomolecular model with implicit and explicit solvent models. Our simulations confirm the stability of the molecular model and provide insight into the dynamical properties of the dimer and tetramer. Specifically, our simulations reveal a heterogeneous distribution of the bending stiffness along the molecular axis with the formation of rather soft and highly flexible hinge-like regions defined by non-alpha-helical linker domains. We report a comparison of Ramachandran maps and the solvent accessible surface area between implicit and explicit solvent models, and compute the persistence length of the dimer and tetramer structure of vimentin intermediate filaments for various subdomains of the protein. Our simulations provide detailed insight into the dynamical properties of the vimentin dimer and tetramer intermediate filament building blocks, which may guide the development of novel coarse-grained models of intermediate filaments, and could also help in understanding assembly mechanisms.     

Sequence-specific 1H NMR assignments and secondary structure in solution of Escherichia coli trp repressor

Sequence-specific 1H NMR assignments are reported for the active L-tryptophan-bound form of Escherichia coli trp repressor. The repressor is a symmetric dimer of 107 residues per monomer; thus at 25 kDa, this is the largest protein for which such detailed sequence-specific assignments have been made. At this molecular mass the broad line widths of the NMR resonances preclude the use of assignment methods based on 1H-1H scalar coupling. Our assignment strategy centers on two-dimensional nuclear Overhauser spectroscopy (NOESY) of a series of selectively deuterated repressor analogues. A new methodology was developed for analysis of the spectra on the basis of the effects of selective deuteration on cross-peak intensities in the NOESY spectra. A total of 90% of the backbone amide protons have been assigned, and 70% of the alpha and side-chain proton resonances are assigned. The local secondary structure was calculated from sequential and medium-range backbone NOEs with the double-iterated Kalman filter method [Altman, R. B., & Jardetzky, O. (1989) Methods Enzymol. 177, 218-246]. The secondary structure agrees with that of the crystal structure [Schevitz, R., Otwinowski, Z., Joachimiak, A., Lawson, C. L., & Sigler, P. B. (1985) Nature 317, 782], except that the solution state is somewhat more disordered in the DNA binding region and in the N-terminal region of the first alpha-helix. Since the repressor is a symmetric dimer, long-range intersubunit NOEs were distinguished from intrasubunit interactions by formation of heterodimers between two appropriate selectively deuterated proteins and comparison of the resulting NOESY spectrum with that of each selectively deuterated homodimer. Thus, from spectra of three heterodimers, long-range NOEs between eight pairs of residues were identified as intersubunit NOEs, and two additional long-range intrasubunits NOEs were assigned.     

A polynomial-time nuclear vector replacement algorithm for automated NMR resonance assignments.

High-throughput NMR structural biology can play an important role in structural genomics. We report an automated procedure for high-throughput NMR resonance assignment for a protein of known structure, or of a homologous structure. These assignments are a prerequisite for probing protein-protein interactions, protein-ligand binding, and dynamics by NMR. Assignments are also the starting point for structure determination and refinement. A new algorithm, called Nuclear Vector Replacement (NVR) is introduced to compute assignments that optimally correlate experimentally measured NH residual dipolar couplings (RDCs) to a given a priori whole-protein 3D structural model. The algorithm requires only uniform( 15)N-labeling of the protein and processes unassigned H(N)-(15)N HSQC spectra, H(N)-(15)N RDCs, and sparse H(N)-H(N) NOE's (d(NN)s), all of which can be acquired in a fraction of the time needed to record the traditional suite of experiments used to perform resonance assignments. NVR runs in minutes and efficiently assigns the (H(N),(15)N) backbone resonances as well as the d(NN)s of the 3D (15)N-NOESY spectrum, in O(n(3)) time. The algorithm is demonstrated on NMR data from a 76-residue protein, human ubiquitin, matched to four structures, including one mutant (homolog), determined either by x-ray crystallography or by different NMR experiments (without RDCs). NVR achieves an assignment accuracy of 92-100%. We further demonstrate the feasibility of our algorithm for different and larger proteins, using NMR data for hen lysozyme (129 residues, 97-100% accuracy) and streptococcal protein G (56 residues, 100% accuracy), matched to a variety of 3D structural models. Finally, we extend NVR to a second application, 3D structural homology detection, and demonstrate that NVR is able to identify structural homologies between proteins with remote amino acid sequences using a database of structural models.     

Structural basis for catalytic activation of a serine recombinase

Sin resolvase is a site-specific serine recombinase that is normally controlled by a complex regulatory mechanism. A single mutation, Q115R, allows the enzyme to bypass the entire regulatory apparatus, such that no accessory proteins or DNA sites are required. Here, we present a 1.86 ? crystal structure of the Sin Q115R catalytic domain, in a tetrameric arrangement stabilized by an interaction between Arg115 residues on neighboring subunits. The subunits have undergone significant conformational changes from the inactive dimeric state previously reported. The structure provides a new high-resolution view of a serine recombinase active site that is apparently fully assembled, suggesting roles for the conserved active site residues. The structure also suggests how the dimer-tetramer transition is coupled to assembly of the active site. The tetramer is captured in a different rotational substate than that seen in previous hyperactive serine recombinase structures, and unbroken crossover site DNA can be readily modeled into its active sites.     

Continuum secondary structure captures protein flexibility

The DSSP program assigns protein secondary structure to one of eight states. This discrete assignment cannot describe the continuum of thermal fluctuations. Hence, a continuous assignment is proposed. Technically, the continuum results from averaging over ten discrete DSSP assignments with different hydrogen bond thresholds. The final continuous assignment for a single NMR model successfully reflected the structural variations observed between all NMR models in the ensemble. The structural variations between NMR models were verified to correlate with thermal motion; these variations were captured by the continuous assignments. Because the continuous assignment reproduces the structural variation between many NMR models from one single model, functionally important variation can be extracted from a single X-ray structure. Thus, continuous assignments of secondary structure may affect future protein structure analysis, comparison, and prediction.     

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase at 2.7 A resolution

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase has been determined at 2.7 A resolution. Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices. In one of the four dyad-related dimers, the two active site Ser-10 residues are 19 A apart, perhaps close enough to contact and become covalently linked to the DNA at the recombination site. This dimer also forms the only closely packed tetramer found in the crystal. The subunit interface at a second dyad-related dimer is more extensive and more highly conserved among the homologous recombinases; however, its active site Ser-10 residues are more than 30 A apart. Side chains, identified by mutations that eliminate catalysis but not DNA binding, are located on the subunit surface near the active site serine and at the interface between a third dyad-related pair of subunits of the tetramer.     

Structure and organisation of SinR, the master regulator of biofilm formation in Bacillus subtilis

sinR encodes a tetrameric repressor of genes required for biofilm formation in Bacillus subtilis. sinI, which is transcribed under Spo0A control, encodes a dimeric protein that binds to SinR to form a SinR-SinI heterodimer in which the DNA-binding functions of SinR are abrogated and repression of biofilm genes is relieved. The heterodimer-forming surface comprises residues conserved between SinR and SinI. Each forms a pair of α-helices that hook together to form an intermolecular four-helix bundle. Here, we are interested in the assembly of the SinR tetramer and its binding to DNA. Size-exclusion chromatography with multi-angle laser light scattering and crystallographic analysis reveal that a DNA-binding fragment of SinR (residues 1-69) is a monomer, while a SinI-binding fragment (residues 74-111) is a tetramer arranged as a dimer of dimers. The SinR(74-111) chain forms two α-helices with the organisation of the dimer similar to that observed in the SinR-SinI complex. The tetramer is formed through interactions of residues at the C-termini of the four chains. A model of the intact SinR tetramer in which the DNA binding domains surround the tetramerisation core was built. Fluorescence anisotropy and surface plasmon resonance experiments showed that SinR binds to an oligonucleotide duplex, 5′-TTTGTTCTCTAAAGAGAACTTA-3′, containing a pair of SinR consensus sequences in inverted orientation with a K_d of 300 nM. The implications of these data for promoter binding and the curious quaternary structural transitions of SinR upon binding to (i) SinI and (ii) the SinR-like protein SlrR, which “repurposes” SinR as a repressor of autolysin and motility genes, are discussed.     

RecOR complex including RecR N-N dimer and RecO monomer displays a high affinity for ssDNA

RecR is an important recombination mediator protein in the RecFOR pathway. RecR together with RecO and RecF facilitates RecA nucleoprotein filament formation and homologous pairing. Structural and biochemical studies of Thermoanaerobacter tengcongensis RecR (TTERecR) and its series mutants revealed that TTERecR uses the N-N dimer as a basic functional unit to interact with TTERecO monomer. Two TTERecR N-N dimers form a ring-shaped tetramer via an interaction between their C-terminal regions. The tetramer is a result of crystallization only. Hydrophobic interactions between the entire helix-hairpin-helix domains within the N-terminal regions of two TTERecR monomers are necessary for formation of a RecR functional N-N dimer. The TTERecR N-N dimer conformation also affects formation of a hydrophobic patch, which creates a binding site for TTERecO in the TTERecR Toprim domain. In addition, we demonstrate that TTERecR does not bind single-stranded DNA (ssDNA) and binds double-stranded DNA very weakly, whereas TTERecOR complex can stably bind DNA, with a higher affinity for ssDNA than double-stranded DNA. Based on these results, we propose an interaction model for the RecOR:ssDNA complex.