Hydroxylated poly(N-isopropylacrylamide) as functional thermoresponsive materials

In this study, we developed a poly(N-isopropylacrylamide)-based thermoresponsive polymeric material with a high content of hydroxyl groups. We newly designed the functional monomer, N-(2-hydroxyisopropyl)acrylamide (HIPAAm), considering maintaining the continuous and repeated structure of the isopropylamide group after copolymerization and the monomer reactivity ratios. The thermoresponsive polymer was derived by conventional radical copolymerization of HIPAAm with N-isopropylacrylamide (NIPAAm) in high yield. Estimation of monomer reactivity ratios, r(1) and r(2), supported the almost random sequence of the comonomers. The obtained copolymers showed a very sensitive phase transition and/or separation in response to temperature in aqueous media although they have many hydrophilic parts, and their thermoresponsive behavior was not affected by the pH. Furthermore, the cloud points of these copolymers closely depended on the HIPAAm content and could be easily controlled by adding salts. HIPAAm is expected to regulate the phase transition and/or separation temperature of the NIPAAm-based copolymers while maintaining their desirable sensitive thermoresponse. Differential scanning calorimetric analysis showed that dehydration of the polymer chains occurring in phase transition became incomplete with increasing HIPAAm content. Moreover, it was found that poly(NIPAAm-co-HIPAAm) having a high content of the HIPAAm unit showed liquid-liquid phase separation involving coacervation. The sizes of the coacervate droplets were relatively monodisperse and very minimal. Poly(NIPAAm-co-HIPAAm) is valuable for use in biomedical fields such as bioseparation.     

Water-soluble complexes through coulombic interactions between bovine serum albumin and anionic polyelectrolytes grafted with hydrophilic nonionic side chains

The interaction between bovine serum albumin (BSA) and the anionic graft copolymers poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulfonate)-graft-poly(N,N-dimethylacrylamide) (P(NaA-co-NaAMPS)-g-PDMAMx) was investigated within the acid pH region, 2 < or = pH < or = 7. The weight percentage, x, of the poly(N,N-dimethylacrylamide) (PDMAM) side chains varied from 0 up to 75% (w:w). When BSA and P(NaA-co-NaAMPS)-g-PDMAMx are oppositely charged, i.e., when pH is lower than the isoelectric point of BSA, the two macromolecules associate through Coulombic attractions. When the anionic graft copolymer is rich enough to the nonionic PDMAM side chains, x > or = 50% w:w, the associative phase separation is practically prevented, as revealed by the turbidimetric study of the BSA/P(NaA-co-NaAMPS)-g-PDMAMx mixtures in aqueous solution vs pH. In addition, the viscosity measurements support the formation through a charge neutralization process of a rather compact protein-polyelectrolyte complex stabilized by the hydrophilic PDMAM side chains grafted onto the anionic copolymer backbone.     

Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

Temperature sensitization of liposomes by use of N-isopropylacrylamide copolymers with varying transition endotherms

Three kinds of copolymers of N-isopropylacrylamide (NIPAM) with the same conformational transition temperature and varying transition endotherms were synthesized with N-acryloylpyrrolidine (APr), N,N-dimethylacrylamide (DMAM), and N-isopropylmethacrylamide (NIPMAM) as the comonomers. Two dodecyl groups were incorporated into the termini of these copolymers as an anchor for the fixation to a liposomal membrane. Egg yolk phosphatidylcholine liposomes having these copolymers were prepared and their temperature-sensitive contents release and association properties were investigated. While these copolymer exhibited a conformational transition at ca. 40 degrees C, DeltaH for the transition increased in the order of poly(APr-co-NIPAM) < poly(DMAM-co-NIPAM) < poly(NIPMAM-co-NIPAM). The liposomes containing poly(NIPMAM-co-NIPAM) showed a drastic release enhancement of entrapped calcein above the transition temperature, whereas the liposomes with poly(DMAM-co-NIPAM) and those with poly(APr-co-NIPAM) exhibited moderate and slight enhancement of calcein release above that temperature, respectively. On the contrary, the liposomes containing poly(APr-co-NIPAM) showed significant aggregation above the transition temperature, but the aggregation was hardly observed for the liposomes having poly(NIPMAM-co-NIPAM), indicating that poly(APr-co-NIPAM) more efficiently made the liposome surface hydrophobic. Thus, we concluded that the copolymer with a large DeltaH is suitable for obtaining functional liposomes with a temperature-sensitive contents release property, whereas the copolymer with a small DeltaH is appropriate for preparing functional liposomes with a temperature-sensitive surface property.     

Temperature sensitization of liposomes by use of thermosensitive block copolymers synthesized by living cationic polymerization: effect of copolymer chain length

We prepared block copolymers of (2-ethoxy)ethoxyethyl vinyl ether (EOEOVE) and octadecyl vinyl ether (ODVE) with the number average molecular weights of 6900, 9300, and 16 700 by living cationic polymerization. The poly(EOEOVE) block acts as a temperature-sensitive moiety, and the poly(ODVE) block acts as an anchor moiety. We also investigated the effect of chain length of the copolymer poly(EOEOVE) block on the ability to sensitize liposomes. The copolymers underwent a coil-globule transition at approximately 36 degrees C in the presence of a membrane of egg yolk phosphatidylcholine (EYPC), detected using differential scanning calorimetry (DSC). Liposomes encapsulating calcein, a water-soluble fluorescent dye, were prepared from mixtures of dioleoylphosphatidylethanolamine, EYPC, and the copolymers. While the copolymer-modified liposomes released little calcein below 30 degrees C, release was enhanced above 35 degrees C, indicating that dehydrated copolymer chains destabilized the liposome membrane. In addition, copolymers with a longer poly(EOEOVE) block induced a more drastic enhancement of contents release in a narrow temperature region near the transition temperature of the poly(EOEOVE) block. As a result, the copolymer with an average molecular weight of 16 700 generated highly sensitive liposomes that produced rapid and dramatic release of the contents in response to temperature.     

Composition and structure of whey protein/gum arabic coacervates

Complex coacervation in whey protein/gum arabic (WP/GA) mixtures was studied as a function of three main key parameters: pH, initial protein to polysaccharide mixing ratio (Pr:Ps)(ini), and ionic strength. Previous studies had already revealed under which conditions a coacervate phase was obtained. This study is aimed at understanding how these parameters influence the phase separation kinetics, the coacervate composition, and the internal coacervate structure. At a defined (Pr:Ps)(ini), an optimum pH of complex coacervation was found (pH(opt)), at which the strength of electrostatic interaction was maximum. For (Pr:Ps)(ini) = 2:1, the phase separation occurred the fastest and the final coacervate volume was the largest at pH(opt) = 4.0. The composition of the coacervate phase was determined after 48 h of phase separation and revealed that, at pH(opt), the coacervate phase was the most concentrated. Varying the (Pr:Ps)(ini) shifted the pH(opt) to higher values when (Pr:Ps)(ini) was increased and to lower values when (Pr:Ps)(ini) was decreased. This phenomenon was due to the level of charge compensation of the WP/GA complexes. Finally, the structure of the coacervate phase was studied with small-angle X-ray scattering (SAXS). SAXS data confirmed that at pH(opt) the coacervate phase was dense and structured. Model calculations revealed that the structure factor of WP induced a peak at Q = 0.7 nm(-1), illustrating that the coacervate phase was more structured, inducing the stronger correlation length of WP molecules. When the pH was changed to more acidic values, the correlation peak faded away, due to a more open structure of the coacervate. A shoulder in the scattering pattern of the coacervates was visible at small Q. This peak was attributed to the presence of residual charges on the GA. The peak intensity was reduced when the strength of interaction was increased, highlighting a greater charge compensation of the polyelectrolyte. Finally, increasing the ionic strength led to a less concentrated, a more heterogeneous, and a less structured coacervate phase, induced by the screening of the electrostatic interactions.     

The immobilization of enzymes and cells of Bacillus stearothermophilus onto poly(maleic anhydride/styrene)-Co-polyethylene and poly(maleic anhydride/vinyl acetate)-Co-polyethylene

The graft copolymer, poly(maleic anhydride/styrene)-co-polyethylene was prepared. The copolymer immobilized bovine serum albumin (BSA), but the amount coupled appeared to be effected by the amount of styrene in the graft copolymer, temperature, and pH of the coupling medium. Competition existed between hydrolysis of the grafted anhydride groups and the protein. A graft copolymer with 66% add-on immobilized 4.5 mg/glucose oxidase/g copolymer, 4.6 mg alkaline phosphates/g copolymer and 0.2 mg cell of Bacillus stearothermophilus/g copolymer. A number of copolymers containing poly(maleic anhydride/vinyl acetate)-co-polyethylene were prepared to cover a range of grafting levels. These immobilized larger quantities of BSA, alkaline phosphatase, and cells of B. stearothermophilus than did the styrene graft copolymer. The copolymer was also hydrolyzed to release the hydroxyl group from the poly(vinyl acetate) component of the grafted chains. Using p-benzoquinone as the "activating agent," the copolymer coupled to BSA and to acid phosphatase. Using p-toluene-sulfonyl chloride, the copolymer was very effective in immobilizing trypsin.     

Association behavior of biotinylated and non-biotinylated poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate)

Biotinylated and non-biotinylated copolymers of poly(ethylene oxide) (PEO) and poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) were synthesized by the atom transfer radical polymerization technique. The chemical compositions of the copolymers as determined by NMR are represented by PEO(113)PDEAEMA(70) and biotin-PEO(104)PDEAEMA(93), respectively. The aggregation behavior of these polymers in aqueous solutions at different pHs and ionic strengths was studied using a combination of potentiometric titration, dynamic light scattering, static light scattering, and transmission electron microscopy. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers form micelles at high pH with hydrodynamic radii (R(h)) of about 19 and 23 nm, respectively. At low pH, the copolymers are dispersed as unimers in solution with R(h) values of about 6-7 nm. However, at a physiological salt concentration (c(s)) of about 0.16 M NaCl and a pH of 7-8, the copolymers form large loosely packed Gaussian chains, which were not present at the low c(s) of 0.001 M NaCl. The critical micelle concentrations (cmc's) and the cytotoxicities of the copolymers were investigated to determine a suitable polymer concentration range for future biological applications. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers possess identical cmc values of about 0.0023 mg/g, while the cytotoxicity test indicated that the copolymers are not toxic up to 0.05 mg/g (>83% cell survival at this concentration).     

Structural transformation of apocytochrome c induced by alternating copolymers of maleic acid and alkene

Apocytochrome c interacts with two copolymers: poly(isobutylene-alt-maleic acid) (PIMA) and poly(1-tetradecene-alt-maleic acid) (PTMA). The interaction leads to apocytochrome c, a conformational change from random coil to alpha-helical structure. The alpha-helix content is influenced by the copolymer concentration, the length of alkyl chain of the copolymers, and pH of the medium. The electrostatic attraction between the copolymer and protein is an indispensable factor for the folding of the protein at acid pH. The hydrophobic interaction is an important factor over the entire pH range, especially when both the copolymer and protein carry negative charges at alkaline pH. The electrostatic and hydrophobic attractions between the copolymer and protein exclude water molecules, promoting the formation of hydrogen bonds within the helical structure. On the other hand, the hydrogen bonds formed between the ionized carboxyl of the copolymer and the amide of the protein partly restrain the formation of hydrogen bonds within the helical structure when the copolymer concentration is higher at pH 6.5 and 10.5.     

Soybean hull peroxidase immobilization on macroporous glycidyl methacrylates with different surface characteristics

Soybean hull peroxidase (SHP, E.C. 1.11.1.7) was immobilized by a glutaraldehyde and periodate method onto series of macroporous copolymers of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA), poly(GMA-co-EGDMA) with various surface characteristics and pore size diameters ranging from 44 to 200 nm. Glutaraldehyde immobilization method and poly(GMA-co-EGDMA) named SGE 20/12 with pore sizes of 120 nm gave immobilized enzyme with highest specific activity of 25 U/g. Deactivation studies showed that immobilization increased stability of SHP and that surface characteristics of the used copolymer had a major influence on a stability of immobilized enzyme at high temperatures and in an organic solvent. The highest thermostability was obtained using the copolymer SGE 20/12 with pore size of 120 nm, while the highest stability in dioxane had SHP immobilized onto copolymer SGE 10/4 with pore size of 44 nm. Immobilized SHP showed a wider pH optimum as compared to the native enzyme especially at alkaline pH values and 3.2 times increased K _m value for pyrogallol. After 6 cycles of repeated use in batch reactor, immobilized SHP retained 25 % of its original activity. Macroporous copolymers with different surface characteristics can be used for fine tuning of activity and stability of immobilized SHP to obtain a biocatalyst suitable for phenol oxidation or polymer synthesis in organic solvents.     

Drug release from and hydrolytic degradation of a poly(ethylene glycol) grafted poly(3-hydroxyoctanoate)

Monoacrylate-poly(ethylene glycol)-grafted poly(3-hydroxyoctanoate) (PEGMA-g-PHO) copolymers were synthesized to develop a swelling-controlled release delivery system for ibuprofen as a model drug. The in vitro hydrolytic degradation of and the drug release from a film made of the PEGMA-g-PHO copolymer were carried out in a phosphate buffer saline (pH 7.4) medium. The hydrolytic degradation of the copolymer was strongly dependent on the degree of grafting (DG) of the PEGMA group. The degradation rate of the copolymer films in vitro increased with increasing DG of the PEGMA group on the PHO chain. The copolymer films showed a controlled delivery of ibuprofen to the medium in periods of time that depend on the composition, hydrophilic/hydrophobic characteristics, initial drug loading amount and film thickness of the graft copolymer support. The drug release rate from the grafted copolymer films was faster than the rate of weight loss of the films themselves. In particular, a combination of the low DG of the PEGMA group in the PHO chains with the low ibuprofen solubility in water led to long-term constant release from these matrices in vitro.     

Polymer recycling in aqueous two-phase extractions using thermoseparating ethylene oxide–propylene oxide copolymers

This is a study on the recovery and recycling of copolymer in aqueous two-phase systems containing random copolymers of ethylene oxide (EO) and propylene oxide (PO). The random copolymers separate from water solution when heated above the lower critical solution temperature (LCST). The primary phase systems were composed of EOPO copolymer and hydroxypropyl or hydroxyethyl starch. After phase separation the upper EOPO phase was removed and subjected to temperature induced phase separation. Copolymers with different EO/PO compositions have been investigated, EO50PO50 [50% EO and 50% PO (w/w)], EO30PO70 and EO20PO80. The temperature required for thermoseparation decreases when the PO content of the copolymer is increased. The effect on the recovery of copolymer after addition of salts, a second polymer or protein was investigated. The added components increased the recovery of copolymer after thermoseparation, e.g., increased the amount copolymer separated from the water phase after thermoseparation. Recycling of copolymer and measurements of polymer concentrations in the primary top and bottom phases after repeated recycling steps was performed. The fluctuation in polymer concentration of the phases was very small after recycling up to four times. Partitioning of the proteins BSA and lysozyme was studied in primary phase systems after recycling of copolymer. The partition coefficients of total protein and lysozyme was not significantly changed during recycling of copolymer. More than 90% of the copolymer could be recovered in the thermoseparation step by optimising the temperature and time for thermoseparation. In repeated phase partitionings in EOPO–starch systems the EO50PO50 copolymer could be recovered to 77% including losses in primary system and thermoseparation, which is equivalent to a total copolymer reuse of 4.3 times.     

An acid-labile block copolymer of PDMAEMA and PEG as potential carrier for intelligent gene delivery systems

Intelligent gene delivery systems based on physiologically triggered reversible shielding technology have evinced enormous interest due to their potential in vivo applications. In the present work, an acid-labile block copolymer consisting of poly(ethylene glycol) and poly(2-(dimethylamino)ethyl methacrylate) segments connected through a cyclic ortho ester linkage (PEG- a-PDMAEMA) was synthesized by atom transfer radical polymerization of DMAEMA using a PEG macroinitiator with an acid-cleavable end group. PEG- a-PDMAEMA condensed with plasmid DNA formed polyplex nanoparticles with an acid-triggered reversible PEG shield. The pH-dependent shielding/deshielding effect of PEG chains on the polyplex particles were evaluated by zeta potential and size measurements. At pH 7.4, polyplexes generated from PEG- a-PDMAEMA exhibited smaller particle size, lower surface charge, reduced interaction with erythrocytes, and less cytotoxicity compared to PDMAEMA-derived polyplexes. At pH 5.0, zeta potential of polyplexes formed from PEG- a-PDMAEMA increased, leveled up after 2 h of incubation and gradual aggregation occurred in the presence of bovine serum albumin (BSA). In contrast, the stably shielded polyplexes formed by DNA and an acid-stable block copolymer, PEG- b-PDMAEMA, did not change in size and zeta potential in 6 h. In vitro transfection efficiency of the acid-labile copolymer greatly increased after 6 h incubation at pH 5.0, approaching the same level of PDMAEMA, whereas there was only slight increase in efficiency for the stable copolymer, PEG- b-PDMAEMA.     

Graft copolymerization of glycerol 1,3-diglycerolate diacrylate onto poly(3-hydroxyoctanoate) to improve physical properties and biocompatibility

Glycerol 1,3-diglycerol diacrylate-grafted poly(3-hydroxyoctanoate) (GDD-g-PHO) copolymers were prepared by heating homogeneous solutions of PHO, GDD monomer and benzoylperoxide initiator. Experiments showed that GDD was successfully grafted onto the PHO chains and that the resulting copolymers had enhanced thermal properties and mechanical strengths. The surfaces and the bulk of GDD-g-PHO copolymers became more hydrophilic as the GDD grafting density in the copolymer increased. Measurements of the growth of Chinese hamster ovary cells and the adsorption of blood proteins and platelets in vitro showed that biocompatibility was also enhanced by grafting of GDD groups. These results indicate that the GDD-g-PHO copolymers are promising materials for biocompatible biomedical applications.     

Ethylene oxide and propylene oxide random copolymer/sodium chloride aqueous two-phase systems: wetting and adsorption on dodecyl-agarose and polystyrene

Liquid/liquid partition chromatography is a mild yet powerful separation method for a variety of biological materials. This work demonstrates that it should be feasible to immobilize an ethylene oxide-propylene oxide (EO/PO) random copolymer solution and to use a solution of NaCl equilibrated against the polymer solution as the mobile-phase (poly (EO-PO) [P(EO-PO)] and NaCl form two aqueous phases known as aqueous two-phase systems). Three random copolymers with different molecular weights and EO/PO ratios were used. Dodecyl-agarose and polystyrene were tested as possible supports. The wetting energies of the aqueous two-phase systems on these two kinds of surfaces were calculated as well as contact angles for each phase on the same surfaces. Finally, the thickness of P(EO-PO) adsorption layers on polystyrene lattices were measured by dynamic light scattering. Contact angle measurements indicate that indeed some EO/PO copolymers preferentially wet hydrophobic substrates, forming thin films.     

Design and synthesis of self-degradable antibacterial polymers by simultaneous chain- and step-growth radical copolymerization

Self-degradable antimicrobial copolymers bearing cationic side chains and main-chain ester linkages were synthesized using the simultaneous chain- and step-growth radical polymerization of t-butyl acrylate and 3-butenyl 2-chloropropionate, followed by the transformation of t-butyl groups into primary ammonium salts. We prepared a series of copolymers with different structural features in terms of molecular weight, monomer composition, amine functionality, and side chain structures to examine the effect of polymer properties on their antimicrobial and hemolytic activities. The acrylate copolymers containing primary amine side chains displayed moderate antimicrobial activity against E. coli but were relatively hemolytic. The acrylate copolymer with quaternary ammonium groups and the acrylamide copolymers showed low or no antimicrobial and hemolytic activities. An acrylate copolymer with primary amine side chains degraded to lower molecular weight oligomers with lower antimicrobial activity in aqueous solution. This degradation was due to amidation of the ester groups of the polymer chains by the nucleophilic addition of primary amine groups in the side chains resulting in cleavage of the polymer main chain. The degradation mechanism was studied in detail by model reactions between amine compounds and precursor copolymers.     

Investigation of polymer and nanoparticle properties with nicotinic acid and p-aminobenzoic acid grafted on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) via click chemistry

In this study, the grafting of nicotinic acid and p-aminobenzoic acid (PABA) onto poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) was performed by Huisgen's 1,3-dipolar cycloaddition, also known as click chemistry. Concentrations used for grafting were 0.10, 0.20, and 0.30 molar ratios with respect to caproyl units. The grafted copolymers were successfully obtained at all ratios as confirmed by NMR, GPC, and FT-IR. According to the DSC results, the polymorphisms of these grafted copolymers were mostly changed from semicrystalline to amorphous depending on the type and the amount of grafting compounds. TGA thermograms showed different thermal stabilities of the grafted copolymers compared to the original copolymers. Cytotoxicity results from HUVEC models suggested that the toxicity of grafted nanoparticles increased with the molar ratios of grafting units. Due to differences in molecular structure between nicotinic acid and PABA, physicochemical properties (particle size and surface charge) of grafted copolymer nanoparticles were substantially different. With increasing molar ratio of the grafting units, the particle size of blank nanoparticles tended to increase, resulting from an increase in the hydrophobic fragments of the grafted copolymer. Ibuprofen was chosen as a model drug to evaluate the interaction between grafted copolymers and loaded drug. After ibuprofen loading, the particle size of the loaded nanoparticles of both grafted copolymers increased compared to that of the blank nanoparticles. Significant differences in loading capacity between nicotinic acid and PABA grafted copolymer nanoparticles were clearly shown. This is most likely a result of different compatibility between each grafting compound and ibuprofen, including hydrogen bond interaction, π-π stacking interaction, and steric hindrance.     

Aqueous polymer two-phase systems formed by new thermoseparating polymers

A set of new polymers that can be used as phase forming components in aqueous two-phase systems is presented. All polymers studied have thermoseparating properties i.e. form one separate polymer enriched phase and one aqueous solution when heated above the critical temperature. This property makes the polymers attractive alternatives to the polymers used in traditional aqueous two-phase systems such as poly(ethylene glycol) (PEG) and dextran. The thermal phase separation simplifies recycling of the polymers, thus making the aqueous two-phase systems more cost efficient and suitable for use in large scale. Thermoseparating polymers studied have been copolymers of ethylene oxide and propylene oxide (EO-PO), poly (N-isopropylacrylamide) (poly-NIPAM), poly vinyl caprolactam (poly-VCL) and copolymers of N-isopropylacrylamide and vinyl caprolactam with vinyl imidazole (poly(NIPAM-VI) and poly(VCL-VI), respectively). In addition, the copolymer poly(NIPAM-VI) has the property to be uncharged at pH above 7.0 and positively charged at lower pH. This allows the partitioning of protein to be directed by changing the pH in the system instead of the traditional addition of salt to direct the partitioning. Hydrophobically modified EO-PO copolymer (HM-(EO-PO)) with alkyl groups (C₁₄) at both ends forms two-phase system with for example poly(NIPAM-VI). The phase diagram for poly(NIPAM-VI)/HM-(EO-PO) was determined and the model proteins lysozyme and BSA were partitioned in this system. For BSA in poly(NIPAM-VI)/HM-(EO-PO) system a change in pH from 8.0 to 5.4 results in a change of partition coefficient from K=0.8 to K=5.1, i.e. BSA could be transferred from the HM-(EO-PO) phase to the poly(NIPAM-VI) phase. BSA partitioning in poly(NIPAM-VI)/HM-(EO-PO) system allows quantitative BSA recovery, and recoveries of poly(NIPAM-VI) and HM-(EO-PO) were 53% and 92%, respectively, after the thermoseparation step.     

Design of polypeptide-functionalized polystyrene microspheres

In this contribution, the principle of spontaneous surface segregation has been applied for the preparation of polypeptide-functionalized polystyrene microspheres. For that purpose, an amphiphilic diblock copolymer was introduced in the mixture styrene/divinylbenzene and polymerized using AIBN as initiator. During the polymerization, cross-linked particles were obtained in which the diblock copolymer was encapsulated. The amphiphilic diblock copolymers used throughout this study contain a hydrophilic polypeptide segment, either poly(L-lysine) or poly(L-glutamic acid) and a hydrophobic polystyrene block. After 4 h of polymerization, rather monodisperse particles with sizes of approximately 3-4 microm were obtained. Upon annealing in hot water, the hydrophilic polypeptides migrate to the interface, hence, either positively charged or neutral particles were obtained when poly(L-lysine) is revealed at the surface and exposed to acidic or basic pH, respectively. On the opposite, negatively charged particles were achieved in basic pH water by using poly(L-glutamic acid) as additive. The surface chemical composition was modified by changing the environment of the particles. Thus, exposure in toluene provoked a surface rearrangement, and due to its affinity, the polystyrene block reorients toward the interface.     

Systematic of alcohol-induced simple coacervation in aqueous gelatin solutions

Turbidity measurements performed at 450 nm were used to follow the process of simple coacervation when 1% (w/v) aqueous alkali processed gelatin (type-B) solutions were titrated with methanol, ethanol, propanol, and tert-butyl alcohol at various pHs of the solution ranging from pH = 5 to 8 and ionic strengths varying from I = 0.01 to 0.1 M NaCl. The titration profiles clearly established the transition points in terms of the percentage of volume of alcohol added relative to that of solvent corresponding to the first occurrence of turbidity (Vt) and a point of turbidity maximum (Vp). Addition of more alcohol drove the system toward precipitation. The values of Vt and Vp characterized the initiation of intramolecular folding and intermolecular aggregate formation of the charge neutralized gelatin molecules and the subsequent micro coacervate droplet formation. The state of intermolecular aggregates and that of folded gelatin molecules could be characterized by dynamic laser light scattering experiments, which implied spontaneous segregation of particle sizes preceding coacervation. The aggregates constitute the coacervate phase while the folded gelatin molecules mostly stay dispersed in the supernatant. The data taken together reveal the role played by solution entropy in addition to that of electrostatic and solute-solvent interactions, which had been overlooked hitherto.