Conversion of volatile fatty acids into polyhydroxyalkanoate by Ralstonia eutropha

Aims:  The aims of this study were to optimize condensed corn solubles (CCS) as a medium for growth of Ralstonia eutropha and to determine the effects of individual volatile fatty acids (VFAs) on polyhydroxyalkanoate (PHA) production .
Methods and Results:  A CCS medium of concentration 240 g l⁻¹ with a carbon : nitrogen ratio of 50 : 1 was developed as the optimal medium. Cultures were grown in 1-l aerated flasks at 250 rev min⁻¹ at 30°C for 120 h. Comparable growth rates were observed in CCS vs a defined medium. At 48 h, VFAs were fed individually at different levels. Optimal levels of all the acids were determined to maximize PHA production. An overall comparison of the VFAs indicated that butyric and propionic acids provided the best results.
Conclusion:  An optimized CCS medium supported growth of R. eutropha . Butyric and propionic acids were the most efficient carbon sources to maximize PHA production when added at the 5 g l⁻¹ level.
Significance and Impact of the Study:  The study shows that a byproduct of ethanol industry can be effectively used as a low cost medium for PHA production, thus partly reducing the cost of commercialization of biopolymers.     

Thiolysis of poly(3-hydroxybutyrate) with polyhydroxyalkanoate synthase from Ralstonia eutropha

Poly(3-hydroxybutyrate) (PHB) is synthesized from 3-hydroxybutyryl-CoA by polyhydroxyalkanoate synthase and hydrolyzed by PHB depolymerase. In this study, we focused on the reverse reaction of polyhydroxyalkanoate synthase, and propose the possibility that PHB can be degraded through a novel process, that is thiolysis of PHB with CoASH. Polyhydroxyalkanoate synthase of Ralstonia eutropha was incubated with 14C-labeled PHB and CoASH. The reaction mixture was fractionated by HPLC and then analyzed with a scintillation counter. The analysis revealed 3-hydroxybutyryl-CoA to be a product of the reaction. When NADP+ and acetoacetyl-CoA reductase were added to the reaction mixture, an increase in absorbance at 340 nm was observed. Native PHB inclusion bodies from R. eutropha also showed thiolytic activity. This is the first indication that polyhydroxyalkanoate synthase catalyzes both the synthesis and degradation of PHB, and that native PHB inclusion bodies has thiolytic activity.     

New insights into activation and substrate recognition of polyhydroxyalkanoate synthase from Ralstonia eutropha

The polyhydroxyalkanoate synthase of Ralstonia eutropha (PhaC_Re) shows a lag time for the start of its polymerization reaction, which complicates kinetic analysis of PhaC_Re. In this study, we found that the lag can be virtually eliminated by addition of 50 mg/L TritonX-100 detergent into the reaction mixture, as well as addition of 2.5 g/L Hecameg detergent as previously reported by Gerngross and Martin (Proc Natl Sci USA 92: 6279–6283, 1995). TritonX-100 is an effective lag eliminator working at much lower concentration than Hecameg. Kinetic analysis of PhaC_Re was conducted in the presence of TritonX-100, and PhaC_Re obeyed Michaelis–Menten kinetics for (R)-3-hydroxybutyryl-CoA substrate. In inhibitory assays using various compounds such as adenosine derivatives and CoA derivatives, CoA free acid showed competitive inhibition but other compounds including 3′-dephospho CoA had no inhibitory effect. Furthermore, PhaC_Re showed a considerably reduced reaction rate for 3′-dephospho (R)-3-hydroxybutyryl CoA substrate and did not follow typical Michaelis–Menten kinetics. These results suggest that the 3′-phosphate group of CoA plays a critical role in substrate recognition by PhaC_Re.     

Characterization of propionate CoA-transferase from Ralstonia eutropha H16

In this study, a propionate CoA-transferase (H16_A2718; EC 2.8.3.1) from Ralstonia eutropha H16 (Pct _Re ) was characterized in detail. Glu342 was identified as catalytically active amino acid residue via site-directed mutagenesis. Activity of Pct _Re was irreversibly lost after the treatment with NaBH₄ in the presence of acetyl-CoA as it is shown for all CoA-transferases from class I, thereby confirming the formation of the covalent enzyme-CoA intermediate by Pct _Re . In addition to already known CoA acceptors for Pct _Re such as 3-hydroxypropionate, 3-hydroxybutyrate, acrylate, succinate, lactate, butyrate, crotonate and 4-hydroxybutyrate, it was found that glycolate, chloropropionate, acetoacetate, valerate, trans-2,3-pentenoate, isovalerate, hexanoate, octanoate and trans-2,3-octenoate formed also corresponding CoA-thioesters after incubation with acetyl-CoA and Pct _Re . Isobutyrate was found to be preferentially used as CoA acceptor amongst other carboxylates tested in this study. In contrast, no products were detected with acetyl-CoA and formiate, bromopropionate, glycine, pyruvate, 2-hydroxybutyrate, malonate, fumarate, itaconate, β-alanine, γ-aminobutyrate, levulate, glutarate or adipate as potential CoA acceptor. Amongst CoA donors, butyryl-CoA, crotonyl-CoA, 3-hydroxybutyryl-CoA, isobutyryl-CoA, succinyl-CoA and valeryl-CoA apart from already known propionyl-CoA and acetyl-CoA could also donate CoA to acetate. The highest rate of the reaction was observed with 3-hydroxybutyryl-CoA (2.5 μmol mg^?1 min^?1). K _m values for propionyl-CoA, acetyl-CoA, acetate and 3-hydroxybutyrate were 0.3, 0.6, 4.5 and 4.3 mM, respectively. The rather broad substrate range might be a good starting point for enzyme engineering approaches and for the application of Pct _Re in biotechnological polyester production.     

Production of polyhydroxybutyrate by Ralstonia eutropha from protein hydrolysates

Polyhydroxybutyrate (PHB) was produced by Ralstonia eutropha DSM 11348 (formerly Alicaligenes eutrophus) in media containing 20–30 g l⁻¹ casein peptone or casamino acids as sole sources of nitrogen. In fermentations using media based on casein peptone, permanent growth up to a cell dry mass of 65 g l⁻¹ was observed. PHB accumulated in cells up to 60%–80% of dry weight. The lowest yields were found in media without any trace elements or with casamino acids added only. The residual cell dry masses were limited to 10–15 g l⁻¹ and did not contain PHB. The highest productivity amounted to 1.2 g PHB l⁻¹ h⁻¹. The mean molecular mass of the biopolymer was determined as 750 kDa. The proportion of polyhydroxyvalerate was less than 0.2% in PHB. The bioprocess was scaled up to a 300-l plant. During a fermentation time of 39 h the cells accumulated PHB to 78% w/w. The productivity was 0.98 g PHB l⁻¹ h¹. Received: 8 July 1998 / Accepted: 26 August 1998     

Dynamics of activity of the key enzymes of polyhydroxyalkanoate metabolism in Ralstonia eutropha

The dynamics of accumulation of polyhydroxybutyrate (PHB) and the activities of the key enzymes of PHB metabolism (beta-ketothiolase, acetoacetyl-CoA reductase, PHA synthase, D-hydroxybutyrate dehydrogenase, and PHA depolymerase) in the hydrogen bacterium Ralstonia eutropha B5786 were studied under various conditions of carbon nutrition and substrate availability. The highest activities of beta-ketothiolase, acetoacetyl-CoA reductase, and PHA synthase were recorded at the stage of acceleration of PHB synthesis. The activities of enzymes catalyzing PHB depolymerization (PHB depolymerase and D-hydroxybutyrate dehydrogenase) were low, being expressed only at stimulated endogenous PHB degradation. The change of carbon source (CO2 or fructose) did not cause any marked changes in the time course of enzyme activity.     

Optimization of growth media components for polyhydroxyalkanoate (PHA) production from organic acids by Ralstonia eutropha

We employed systematic mixture analysis to determine optimal levels of acetate, propionate, and butyrate for cell growth and polyhydroxyalkanoate (PHA) production by Ralstonia eutropha H16. Butyrate was the preferred acid for robust cell growth and high PHA production. The 3-hydroxyvalerate content in the resulting PHA depended on the proportion of propionate initially present in the growth medium. The proportion of acetate dramatically affected the final pH of the growth medium. A model was constructed using our data that predicts the effects of these acids, individually and in combination, on cell dry weight (CDW), PHA content (%CDW), PHA production, 3HV in the polymer, and final culture pH. Cell growth and PHA production improved approximately 1.5-fold over initial conditions when the proportion of butyrate was increased. Optimization of the phosphate buffer content in medium containing higher amounts of butyrate improved cell growth and PHA production more than 4-fold. The validated organic acid mixture analysis model can be used to optimize R. eutropha culture conditions, in order to meet targets for PHA production and/or polymer HV content. By modifying the growth medium made from treated industrial waste, such as palm oil mill effluent, more PHA can be produced.     

Engineering of class I lactate-polymerizing polyhydroxyalkanoate synthases from Ralstonia eutropha that synthesize lactate-based polyester with a block nature

Class I polyhydroxyalkanoate (PHA) synthase from Ralstonia eutropha (PhaC_Re) was engineered so as to acquire an unusual lactate (LA)-polymerizing activity. To achieve this, the site-directed saturation mutagenesis of PhaC_Re was conducted at position 510, which corresponds to position 481 in the initially discovered class II LA-polymerizing PHA synthase (PhaC1_PsSTQK), a mutation in which (Gln481Lys) was shown to be essential to its LA-polymerizing activity (Taguchi et al., Proc Natl Acad Sci USA 105(45):17323–17327, 2008). The LA-polymerizing activity of the PhaC_ReA510X mutants was evaluated based on the incorporation of LA units into the P[3-hydroxybutyrate(3HB)] backbone in vivo using recombinant Escherichia coli LS5218. Among 19 PhaC_Re(A510X) mutants, 15 synthesized P (LA-co-3HB), indicating that the 510 residue plays a critical role in LA polymerization. The polymer synthesized by PhaC_ReA510S was fractionated using gel permeation chromatography in order to remove the low molecular weight fractions. The ¹³C and ¹H NMR analyses of the high molecular weight fraction revealed that the polymer was a P(7 mol% LA-co-3HB) copolymer with a weight-averaged molecular weight of 3.2?×?10⁵ Da. Interestingly, the polymer contained an unexpectedly high ratio of an LA-LA*-LA triad sequence, suggesting that the polymer synthesized by PhaC_Re mutant may not be a random copolymer, but presumably had a block sequence.     

Comparison of phbC genes cloned from Ralstonia eutropha and Alcaligenes latus for utilization in metabolic engineering of polyhydroxyalkanoate biosynthesis

Two cloned phbC genes, encoding polyhydroxybutyrate (PHB) synthase from Ralstonia eutropha and from Alcaligenes latus, were transformed into a PHB-negative mutant of R. eutropha. The expression characteristics of both genes were compared for the biosyntheses of PHB and its copolymers. Each phbC gene had different characteristics not only in the biosyntheses of PHB, poly(3-hydroxybutyrate-3-hydroxy-valerate), and poly(3-hydroxybutyrate-4-hydroxybutyrate) but also in the resulting morphology of PHB granules.     

Class I and III polyhydroxyalkanoate synthases from Ralstonia eutropha and Allochromatium vinosum: characterization and substrate specificity studies

Class I and III polyhydroxyalkanoate (PHA) synthases catalyze the conversion of beta-hydroxybutyryl coenzyme A (HBCoA) to polyhydroxybutyrate. The Class I PHA synthase from Ralstonia eutropha has been purified by numerous labs with reported specific activities that vary between 1 and 160 U/mg. An N-terminal (His)6-PHA synthase was constructed and purified with specific activity of 40 U/mg. The variable activity is shown to be related to the protein's propensity to aggregate and not to incomplete post-translational modification by coenzyme A and a phosphopantetheinyl transferase. The substrate specificities of this enzyme and the Class III PHA synthase from Allochromatium vinosum have been determined with nine analogs of varied chain length and branching, OH group position within the chain, and thioesters. The results suggest that in vitro, both PHA synthases are very specific and provide further support for their active site structural similarities. In vitro results differ from studies in vivo.     

Characterization of an extracellular lipase and its chaperone from Ralstonia eutropha H16

Lipase enzymes catalyze the reversible hydrolysis of triacylglycerol to fatty acids and glycerol at the lipid–water interface. The metabolically versatile Ralstonia eutropha strain H16 is capable of utilizing various molecules containing long carbon chains such as plant oil, organic acids, or Tween as its sole carbon source for growth. Global gene expression analysis revealed an upregulation of two putative lipase genes during growth on trioleate. Through analysis of growth and activity using strains with gene deletions and complementations, the extracellular lipase (encoded by the lipA gene, locus tag H16_A1322) and lipase-specific chaperone (encoded by the lipB gene, locus tag H16_A1323) produced by R. eutropha H16 was identified. Increase in gene dosage of lipA not only resulted in an increase of the extracellular lipase activity, but also reduced the lag phase during growth on palm oil. LipA is a non-specific lipase that can completely hydrolyze triacylglycerol into its corresponding free fatty acids and glycerol. Although LipA is active over a temperature range from 10 °C to 70 °C, it exhibited optimal activity at 50 °C. While R. eutropha H16 prefers a growth pH of 6.8, its extracellular lipase LipA is most active between pH 7 and 8. Cofactors are not required for lipase activity; however, EDTA and EGTA inhibited LipA activity by 83 %. Metal ions Mg²⁺, Ca²⁺, and Mn²⁺ were found to stimulate LipA activity and relieve chelator inhibition. Certain detergents are found to improve solubility of the lipid substrate or increase lipase-lipid aggregation, as a result SDS and Triton X-100 were able to increase lipase activity by 20 % to 500 %. R. eutropha extracellular LipA activity can be hyper-increased, making the overexpression strain a potential candidate for commercial lipase production or in fermentations using plant oils as the sole carbon source.     

PhaM Is the Physiological Activator of Poly(3-Hydroxybutyrate) (PHB) Synthase (PhaC1) in Ralstonia eutropha

Poly(3-hydroxybutyrate) (PHB) synthase (PhaC1) is the key enzyme of PHB synthesis in Ralstonia eutropha and other PHB-accumulating bacteria and catalyzes the polymerization of 3-hydroxybutyryl-CoA to PHB. Activity assays of R. eutropha PHB synthase are characterized by the presence of lag phases and by low specific activity. It is assumed that the lag phase is caused by the time necessary to convert the inactive PhaC1 monomer into the active dimeric form by an unknown priming process. The lag phase can be reduced by addition of nonionic detergents such as hecameg [6-O-(N-heptyl-carbamoyl)-methyl-α-d-glucopyranoside], which apparently accelerates the formation of PhaC1 dimers. We identified the PHB granule-associated protein (PGAP) PhaM as the natural primer (activator) of PHB synthase activity. PhaM was recently discovered as a novel type of PGAP with multiple functions in PHB metabolism. Addition of PhaM to PHB synthase assays resulted in immediate polymerization of 3HB coenzyme A with high specific activity and without a significant lag phase. The effect of PhaM on (i) PhaC1 activity, (ii) oligomerization of PhaC1, (iii) complex formation with PhaC1, and (iv) PHB granule formation in vitro and in vivo was shown by cross-linking experiments of purified proteins (PhaM, PhaC1) with glutardialdehyde, by size exclusion chromatography, and by fluorescence microscopic detection of de novo-synthesized PHB granules.     

Formation of short chain length/medium chain length polyhydroxyalkanoate copolymers by fatty acid beta-oxidation inhibited Ralstonia eutropha

Ralstonia eutropha has been considered as a bacterium, incorporating hydroxyalkanoates of less than six carbons only into polyhydroxyalkanoates (PHAs). Cells of the wild type cultivated with sodium octanoate as the carbon source in the presence of the fatty acid beta-oxidation inhibitor sodium acrylate synthesized PHAs composed of the medium chain length hydroxyalkanoates (3HA(MCL)) 3-hydroxyhexanoate (3HHx) and 3-hydroxyoctanoate (3HO) as well as of 3-hydroxybutyrate and 3-hydroxyproprionate as revealed by gas chromatography, (1)H NMR spectroscopy, and mass spectroscopy. The characterization of the polymer as a tetrapolymer was confirmed by differential solvent extraction and measurement of melting and glass transition temperature depression in the purified polymer compared to PHB. These data suggested that the R. eutropha PHA synthase is capable of incorporating longer chain substrates than suggested by previous in vitro studies. Furthermore, expression of the class II PHA synthase gene phaC1 from P. aeruginosa in R. eutropha resulted in the accumulation of PHAs consisting of 3HA(MCL) contributing about 3-5% to cellular dry weight. These PHAs were composed of nearly equal molar fractions of 3HO and 3-hydroxydecanoate (3HD) with traces of 3HHx. These data indicated that 3HA(MCL)-CoA thioesters were diverted from the fatty acid beta-oxidation pathway towards PHA biosynthesis in recombinant R. eutropha.     

Characterization of a gene cluster from Ralstonia eutropha JMP134 encoding metabolism of 4-methylmuconolactone

A 2,585 bp chromosomal DNA segment of Ralstonia eutropha JMP134 (formerly: Alcaligenes eutrophus JMP134) which contains a gene cluster encoding part of the modified ortho-cleavage pathway encodes a putative transport protein for 4-methylmuconolactone, a novel 4-methylmuconolactone methylisomerase and methylmuconolactone isomerase. The putative 4-methylmuconolactone transporter, a protein with a calculated molecular mass of 45.8 kDa, exhibits sequence homology to other members of the major superfamily of transmembrane facilitators and shows the common structural motif of 12 transmembrane-spanning α-helical segments and the hallmark amino acid motif characteristic of the superfamily. Consistent with the novelty of the reaction catalyzed by 4-methylmuconolactone methylisomerase, no primary sequence homologies were found between this enzyme or its gene and other proteins or genes in the data banks, suggesting that this enzyme represents a new type of isomerase. The molecular mass of the native 4-methylmuconolactone methylisomerase was determined by gel filtration analysis to be 25±2 kDa. From the polynucleotide sequence of the gene, a molecular mass of 12.9 kDa was calculated and hence we predict a homodimeric quaternary structure. The high sensitivity of 4-methylmuconolactone methylisomerase to heavy metals and thiol-modifying reagents implicates the involvement of sulfhydryl groups in the catalytic reaction. The methylmuconolactone isomerase – calculated molecular mass 10.3 kDa – has a primary structure related to the classical muconolactone isomerases (EC 5.3.3.4) of Acinetobacter calcoaceticus, of two Pseudomonas putida strains and of Ralstonia eutropha JMP134, suggesting that these are all isoenzymes. Consistent with this proposal is the finding that the purified protein exhibits muconolactone-isomerizing activity.     

Ralstonia eutropha TF93 is blocked in tat-mediated protein export

Ralstonia eutropha (formerly Alcaligenes eutrophus) TF93 is pleiotropically affected in the translocation of redox enzymes synthesized with an N-terminal signal peptide bearing a twin arginine (S/T-R-R-X-F-L-K) motif. Immunoblot analyses showed that the catalytic subunits of the membrane-bound [NiFe] hydrogenase (MBH) and the molybdenum cofactor-binding periplasmic nitrate reductase (Nap) are mislocalized to the cytoplasm and to the inner membrane, respectively. Moreover, physiological studies showed that the copper-containing nitrous oxide reductase (NosZ) was also not translocated to the periplasm in strain TF93. The cellular localization of enzymes exported by the general secretion system was unaffected. The translocation-arrested MBH and Nap proteins were enzymatically active, suggesting that twin-arginine signal peptide-dependent redox enzymes may have their cofactors inserted prior to transmembrane export. The periplasmic destination of MBH, Nap, and NosZ was restored by heterologous expression of Azotobacter chroococcum tatA mobilized into TF93. tatA encodes a bacterial Hcf106-like protein, a component of a novel protein transport system that has been characterized in thylakoids and shown to translocate folded proteins across the membrane.     

A novel high-cell-density protein expression system based on Ralstonia eutropha

We describe the development of a novel protein expression system based on the industrial fermentation organism Ralstonia eutropha (formerly known as Alcaligenes eutrophus) NCIMB 40124. This new system overcomes some of the shortcomings of traditional Escherichia coli-based protein expression systems, particularly the propensity of such systems to form inclusion bodies during high-level expression. Using a proteomics approach, we identified promoters that can be induced by simple process parameters or medium compositions in high-density cell culture or shake flasks, respectively. By combining newly developed molecular biological tools with a high-cell-density fermentation process, we were able to produce high levels (>1 g/liter) of soluble, active organophosphohydrolase, a model enzyme prone to inclusion body formation in E. coli.     

Rapid selection of glucose-utilizing variants of the polyhydroxyalkanoate producer Ralstonia eutropha H16 by incubation with high substrate levels

Aims: The application of Ralstonia eutropha H16 for producing polyhydroxyalkanoates as bioplastics is limited by the incapability of the bacterium to utilize glucose as a growth substrate. This study aims in characterizing glucose‐utilizing strains that arose after incubation with high glucose levels, in comparison with previously published mutants, generated either by mutagenesis or by metabolic engineering. Methods and Results: Cultivations on solid and liquid media showed that the application of high substrate concentrations rapidly induced a glucose‐positive phenotype. The time span until the onset of growth and the frequency of glucose‐utilizing colonies were correlated to the initial glucose concentration. All mutants exhibited elevated activities of glucose‐6‐phosphate dehydrogenase. The glucose‐positive phenotype was abolished after deleting genes for the N‐acetylglucosamine phosphotransferase system. Conclusions: A procedure is provided for selecting glucose‐utilizing R. eutropha H16 in an unprecedented short time period and without any mutagenic treatment. An altered N‐acetylglucosamine phosphotransferase system appears to be a common motif in all glucose‐utilizing mutants examined so far. Significance and Impact of the Study: The correlation of the applied glucose concentration and the appearance of glucose‐utilizing mutants poses questions about the randomness or the specificity of adaptive mutations in general. Furthermore, glucose‐adapted strains of R. eutropha H16 could be useful for the production of bioplastics.     

Identification of a multifunctional protein, PhaM, that determines number, surface to volume ratio, subcellular localization and distribution to daughter cells of poly(3-hydroxybutyrate), PHB, granules in Ralstonia eutropha H16

A two‐hybrid approach was applied to screen for proteins with the ability to interact with PHB synthase (PhaC1) of Ralstonia eutropha. The H16_A0141 gene (phaM) was identified in the majority of positive clones. PhaM (26.6 kDa) strongly interacted with PhaC1 and with phasin PhaP5 but not with PhaP1 or other PHB granule‐associated proteins. A ΔphaM mutant accumulated only one or two large PHB granules instead of three to six medium‐sized PHB granules of the wild type, and distribution of granules to daughter cells was disordered. All three phenotypes (number, size and distribution of PHB granules) were reversed by reintroduction of phaM. Purified PhaM revealed DNA‐binding properties in gel mobility shift experiments. Expression of a fusion of the yellow fluorescent protein (eYfp) with PhaM resulted in formation of many small fluorescent granules that were bound to the nucleoid region. Remarkably, an eYfp–PhaP5 fusion localized at the cell poles in a PHB‐negative background and overexpression of eYfp–PhaP5 in the wild type conferred binding of PHB granules to the cell poles. In conclusion, subcellular localization of PHB granules in R. eutropha depends on a concerted expression of at least three PHB granule‐associated proteins, namely PhaM, PhaP5 and PHB synthase PhaC1.     

Integrated recombinant protein expression and purification platform based on Ralstonia eutropha

Protein purification of recombinant proteins constitutes a significant cost of biomanufacturing and various efforts have been directed at developing more efficient purification methods. We describe a protein purification scheme wherein Ralstonia eutropha is used to produce its own "affinity matrix," thereby eliminating the need for external chromatographic purification steps. This approach is based on the specific interaction of phasin proteins with granules of the intracellular polymer polyhydroxybutyrate (PHB). By creating in-frame fusions of phasins and green fluorescent protein (GFP) as a model protein, we demonstrated that GFP can be efficiently sequestered to the surface of PHB granules. In a second step, we generated a phasin-intein-GFP fusion, wherein the self-cleaving intein can be activated by the addition of thiols. This construct allowed for the controlled binding and release of essentially pure GFP in a single separation step. Finally, pure, active beta-galactosidase was obtained in a single step using the above described method.     

Characterization of microbial polythioesters: physical properties of novel copolymers synthesized by Ralstonia eutropha

Various samples of polythioesters with different contents of 3-mercaptopropionic acid (3MP) or 3-mercaptobutyric acid (3MB) as one comonomer and with 3-hydroxybutyric acid (3HB) as the second constituent were produced by cultivating cells of Ralstonia eutropha strain H16 in mineral salts medium containing 3MP or 3MB plus gluconate as carbon sources. Fermentations were done also at the 30-L scale. The various samples were cast as films from chloroform and the following were recorded: melting point, solid-state NMR, X-ray diffraction. The copolyester poly(3HB-co-3MP) displayed mutiple melting peaks corresponding to separate phases rich in 3MP and 3HB. The copolyester poly(3HB-co-3MB) displayed very low crystallinity and melting points higher than that of poly(3HB) when the 3HB content was 40% or less.