Role of D and E domains in the migration of vascular smooth muscle cells into fibrin gels

The structure of fibrin plays an important role in the organization of thrombi, the development of atherosclerosis, and restenosis after PTCA. In this study, we examined the mechanisms of the migration of vascular smooth muscle cells (SMCs) into fibrin gels, using an in vitro assay system. Cultured SMCs from bovine fetal aortic media migrated into fibrin gels prepared with thrombin, which cleaves both fibrinopeptides A and B from fibrinogen, without other chemotactic stimuli. Both desA fibrin gels prepared with batroxobin, which cleaves only fibrinopeptide A, and desB fibrin gels prepared with Agkistrodon contortrix thrombin-like enzyme (ACTE), which cleaves only fibrinopeptide B, similarly induced the migration of SMCs compared to fibrin gels prepared with thrombin. These results suggest that the cleavage of fibrinopeptides is not necessary, but rather that the three-dimensional structure of the gel may be important for the migration of SMCs. Furthermore, gels prepared with protamine sulfate, which forms fibrin-like gels non-enzymatically, similarly induced the migration of SMCs compared to the gels prepared with thrombin. Both anti-fibrin(ogen) fragment D and anti-fibrin(ogen) E antibodies inhibited the migration of SMCs into fibrin gels, suggesting that both the D and E domains of fibrin(ogen) are involved in the migration of SMCs into fibrin gels. The addition of GRGDS, a synthetic RGD-containing peptide, but not that of GRGES, a control peptide, partially inhibited the migration of SMCs into fibrin gels, suggesting that the migration of SMCs into fibrin gels is at least in part dependent on the RGD-containing region of the alpha chain. The migration of SMCs into fibrin gels was also inhibited by a monoclonal antibody for integrin alpha v beta 3 and alpha 5 beta 1, indicating that migration is dependent on these integrins. Furthermore, both fibrin(ogen) fragments D and E inhibited the migration of SMCs into fibrin gels, suggesting that these fragments, generated during fibrino(geno)lysis, may be relevant in the regulation of SMC migration into fibrin gels.     

Elastic Behavior and Platelet Retraction in Low- and High-Density Fibrin?Gels

Fibrin is a biopolymer that gives thrombi the mechanical strength to withstand the forces imparted on them by blood flow. Importantly, fibrin is highly extensible, but strain hardens at low deformation rates. The density of fibrin in clots, especially arterial clots, is higher than that in gels made at plasma concentrations of fibrinogen (3–10 mg/mL), where most rheology studies have been conducted. Our objective in this study was to measure and characterize the elastic regimes of low (3–10 mg/mL) and high (30–100 mg/mL) density fibrin gels using shear and extensional rheology. Confocal microscopy of the gels shows that fiber density increases with fibrinogen concentration. At low strains, fibrin gels act as thermal networks independent of fibrinogen concentration. Within the low-strain regime, one can predict the mesh size of fibrin gels by the elastic modulus using semiflexible polymer theory. Significantly, this provides a link between gel mechanics and interstitial fluid flow. At moderate strains, we find that low-density fibrin gels act as nonaffine mechanical networks and transition to affine mechanical networks with increasing strains within the moderate regime, whereas high-density fibrin gels only act as affine mechanical networks. At high strains, the backbone of individual fibrin fibers stretches for all fibrin gels. Platelets can retract low-density gels by >80% of their initial volumes, but retraction is attenuated in high-density fibrin gels and with decreasing platelet density. Taken together, these results show that the nature of fibrin deformation is a strong function of fibrin fiber density, which has ramifications for the growth, embolization, and lysis of thrombi.     

The bacterial peptide N-formyl-Met-Leu-Phe inhibits killing of Staphylococcus epidermidis by human neutrophils in fibrin gels.

To study human neutrophil (polymorphonuclear leukocyte (PMN)) migration and killing of bacteria in an environment similar to that found in inflamed tissues in vivo, we have used fibrin gels. Fibrin gels (1500 microm thick) containing Staphylococcus epidermidis were formed in Boyden-type chemotaxis chambers. PMN migrated < 300 microm into these gels in 6 h and did not kill S. epidermidis when the gels contained heat-inactivated serum, C5-deficient serum, a streptococcal peptidase specific for a fragment of cleaved C5 (C5a), or anti-C5aR IgG. In contrast, in gels containing normal human serum, PMN migrated approximately 1000 microm into the gels in 4 h and into the full thickness of the gels in 6 h, and killed 90% of S. epidermidis in 6 h. fMLP reduced PMN migration into fibrin gels and allowed S. epidermidis to increase by approximately 300% in 4 h, whereas leukotriene B(4) stimulated PMN to migrate the full thickness of the gels and to kill 80% of S. epidermidis in 4 h. We conclude that both complement opsonization and C5a-stimulated chemotaxis are required for PMN bacterial killing in fibrin gels, and that fMLP inhibits PMN bactericidal activity in fibrin gels. The latter finding is surprising and suggests that in the presence of fibrin fMLP promotes bacterial virulence.     

In vitro angiogenesis is modulated by the mechanical properties of fibrin gels and is related to αvβ3 integrin localization

Summary This study deals with the role of the mechanical properties of matrices in in vitro angiogenesis. The ability of rigid fibrinogen matrices with fibrin gels to promote capillarylike structures was compared. The role of the mechanical properties of the fibrin gels was assessed by varying concentration of the fibrin gels. When the concentration of fibrin gels was decreased from 2 mg/ml to 0.5 mg/ml, the capillarylike network increased. On rigid fibrinogen matrices, capillarylike structures were not formed. The extent of the capillarylike network formed on fibrin gels having the lowest concentration depended on the number of cells seeded. The dynamic analysis of capillarylike network formation permitted a direct visualization of a progressive stretching of the 0.5 mg/ml fibrin gels. This stretching was not observed when fibrin concentration increases. This analysis shows that 10 h after seeding, a prearrangement of cells into ringlike structures was observed. These ringlike structures grew in size. Between 16 and 24 h after seeding, the capillarylike structures were formed at the junction of two ringlike structures. Analysis of the α_vβ₃ integrin localization demonstrates that cell adhesion to fibrinogen is mediated through the α_vβ₃ integrin localized into adhesion plaques. Conversely, cell adhesion to fibrin shows a diffuse and dot-contact distribution. We suggest that the balance of the stresses between the tractions exerted by the cells and the resistance of the fibrin gels triggers an angiogenic signal into the intracellular compartment. This signal could be associated with modification in the α_vβ₃ integrin distribution.     

A reproducible, high throughput method for fabricating fibrin gels

ABSTRACT: BACKGROUND: Fibrin gels are a promising biomaterial for tissue engineering. However, current fabrication methods are time intensive with inherent variation. There is a pressing need to develop new and consistent approaches for producing fibrin-based hydrogels for examination. RESULTS: We developed a high throughput method for creating fibrin gels using molds fabricated from polydimethylsiloxane (PDMS). Fibrin gels were produced by adding solutions of fibrinogen and thrombin to cylindrical defects in a PDMS sheet. Undisturbed gels were collected by removing the sheet, and fibrin gels were characterized. The characteristics of resulting gels were compared to published data by measuring compressive stiffness and osteogenic response of entrapped human mesenchymal stem cells (MSCs). Gels exhibited compressive moduli nearly identical to our previously reported fabrication method. Trends in alkaline phosphatase activity, an early marker of osteogenic differentiation in MSCs, were also consistent with previous data. CONCLUSIONS: These findings demonstrate a streamlined approach to fibrin gel production that drastically reduces the time required to make fibrin gels, while also reducing variability between gel batches. This fabrication technique provides a valuable tool for generating large numbers of gels in a cost-effective manner.     

Albumin indirectly modulates fibrin and protofibrin ultrastructure

Albumin modulation of fibrin and protofibrin coagulation parameters was studied. Cation-depleted, fatty acid free, human and bovine albumins decrease fibrin clot turbidity in a concentration-dependent manner. Albumin also inhibits the formation of protofibrin gels, induced by addition of 25 microM Zn(II) to protofibrils, though it does not bind to (proto)fibrin. In order to verify that competition for cations underlies the influence of albumin, fibrinogen was dialyzed against cation-depleted albumin. Elemental analysis indicates a redistribution of Zn(II) from the fibrinogen to the albumin compartment, and the resultant fibrin clots are less turbid. Apparently, cation-depleted albumin acts as a competitor for divalent cations. The ability of albumin to compete for available Zn(II) was also expressed in gels formed by pH-jump experiments, in which fibrin monomer, maintained soluble at pH 4.9, is induced to change phase by addition of NaOH to pH 7.4. While turbidimetric evidence indicates that individual fibrin fibers simply become thinner with albumin, scanning electron micrographs (SEM) reveal a more complex effect on ultrastructure. Though albumin does not bind to the gels, fibrin gels produced with albumin show major changes in fiber ultrastructure, particularly evident in gels formed in the presence of Zn(II). These structural modifications are discussed within the context of the "excluded volume" effect, in which "crowding" by albumin alters (proto)fibrin reactivity and ultrastructure.     

Differential regulation of beta1 integrins by chemoattractants regulates neutrophil migration through fibrin

Chemoattractants differ in their capacity to stimulate neutrophils to adhere to and to migrate through matrices containing fibrin. Formyl methionyl leucyl phenylalanine (fMLP) stimulates neutrophils to adhere closely to, but not to migrate into, fibrin gels. Leukotriene B4 (LTB4) stimulates neutrophils to adhere loosely to and to migrate through fibrin gels. We report that alpha5beta1 integrins regulate the different migratory behaviors on fibrin gels of neutrophils in response to these chemoattractants. fMLP, but not LTB4, activated neutrophil beta1 integrins, as measured by binding of mAb 15/7 to an activation epitope on the beta1 integrins. Antibodies or peptides that block alpha5beta1 integrins prevented fMLP-stimulated neutrophils from forming zones of close apposition on fibrin and reversed fMLP's inhibitory effect on neutrophil chemotaxis through fibrin. In contrast, neither peptides nor antibodies that block beta1 integrins affected the capacity of LTB4-stimulated neutrophils to form zones of loose apposition or to migrate through fibrin gels. These results suggest that chemoattractants generate at least two different messages that direct neutrophils, and perhaps other leukocytes, to accumulate at specific anatomic sites: a general message that induces neutrophils to crawl and a specific message that prepares neutrophils to stop when they contact appropriate matrix proteins for activated beta1 integrins.     

Fibronectin and fibrin gel structure

Plasma fibronectin is covalently incorporated into alpha-chains of fibrin gels in the presence of Factor XIII activated by thrombin (FXIIIaT) but not by Factor XIII activated by the snake venom enzyme batroxobin (FXIIIaB). FXIIIaB catalyzes introduction of gamma-gamma cross-links in fibrin but cross-linked alpha-chains are not formed. In the presence of FXIIIaT, fibrin gels formed by batroxobin incorporated fibronectin and the alpha-chains are cross-linked indicating that FXIIIaB has a different substrate specificity from FXIIIaT. In the presence of FXIIIaT the incorporation of fibronectin approaches 1 mol/340 kDa unit weight of fibrin. Fibronectin when present in a fibrinogen thrombin mixture containing FXIII does not influence the clotting time of the system nor the release of fibrinopeptides. Incorporation of fibronectin is not appreciable before the gel point. This indicates that the polymerization and gelation of fibrinogen is essentially not perturbed by the presence of fibronectin and that fibrin in the gel matrix rather than the fibrin polymers formed prior to gel point is the preferred structure for fibronectin incorporation. Incorporation of fibronectin into fibrin gels during formation leads to an increase in turbidity and a small decrease in Ks (permeability coefficient). This suggests that the width of the strands in the gel increases as a result of fibronectin incorporation. Fibronectin is also incorporated into preformed gels having completely cross-linked gamma- and alpha-chains perhaps indicating that the sites in fibrin involved in fibronectin incorporation are different from those involved in fibrin cross-linking. FXIIIaT appeared to be adsorbed to fibrin gel matrix in the presence but not in the absence of calcium ions.     

Cells Actively Stiffen Fibrin Networks by Generating Contractile Stress

During wound healing and angiogenesis, fibrin serves as a provisional extracellular matrix. We use a model system of fibroblasts embedded in fibrin gels to study how cell-mediated contraction may influence the macroscopic mechanical properties of their extracellular matrix during such processes. We demonstrate by macroscopic shear rheology that the cells increase the elastic modulus of the fibrin gels. Microscopy observations show that this stiffening sets in when the cells spread and apply traction forces on the fibrin fibers. We further show that the stiffening response mimics the effect of an external stress applied by mechanical shear. We propose that stiffening is a consequence of active myosin-driven cell contraction, which provokes a nonlinear elastic response of the fibrin matrix. Cell-induced stiffening is limited to a factor 3 even though fibrin gels can in principle stiffen much more before breaking. We discuss this observation in light of recent models of fibrin gel elasticity, and conclude that the fibroblasts pull out floppy modes, such as thermal bending undulations, from the fibrin network, but do not axially stretch the fibers. Our findings are relevant for understanding the role of matrix contraction by cells during wound healing and cancer development, and may provide design parameters for materials to guide morphogenesis in tissue engineering.     

Cells Actively Stiffen Fibrin Networks by Generating Contractile Stress

During wound healing and angiogenesis, fibrin serves as a provisional extracellular matrix. We use a model system of fibroblasts embedded in fibrin gels to study how cell-mediated contraction may influence the macroscopic mechanical properties of their extracellular matrix during such processes. We demonstrate by macroscopic shear rheology that the cells increase the elastic modulus of the fibrin gels. Microscopy observations show that this stiffening sets in when the cells spread and apply traction forces on the fibrin fibers. We further show that the stiffening response mimics the effect of an external stress applied by mechanical shear. We propose that stiffening is a consequence of active myosin-driven cell contraction, which provokes a nonlinear elastic response of the fibrin matrix. Cell-induced stiffening is limited to a factor 3 even though fibrin gels can in principle stiffen much more before breaking. We discuss this observation in light of recent models of fibrin gel elasticity, and conclude that the fibroblasts pull out floppy modes, such as thermal bending undulations, from the fibrin network, but do not axially stretch the fibers. Our findings are relevant for understanding the role of matrix contraction by cells during wound healing and cancer development, and may provide design parameters for materials to guide morphogenesis in tissue engineering.     

Anisotropic mechanical properties of magnetically aligned fibrin gels measured by magnetic resonance elastography

The anisotropic mechanical properties of magnetically aligned fibrin gels were measured by magnetic resonance elastography (MRE) and by a standard mechanical test: unconfined compression. Soft anisotropic biomaterials are notoriously difficult to characterize, especially in vivo. MRE is well-suited for efficient, non-invasive, and non-destructive assessment of shear modulus. Direction-dependent differences in shear modulus were found to be statistically significant for gels polymerized at magnetic fields of 11.7 and 4.7 T compared to control gels. Mechanical anisotropy was greater in the gels polymerized at the higher magnetic field. These observations were consistent with results from unconfined compression tests. Analysis of confocal microscopy images of gels showed measurable alignment of fibrils in gels polymerized at 11.7 T. This study provides direct, quantitative measurements of the anisotropy in mechanical properties that accompanies fibril alignment in fibrin gels.     

Investigation of interaction of thrombin-binding aptamer with thrombin and prethrombin-2 by simulation of molecular dynamics

Thrombin is a major component of blood clotting and involved in the formation of a fibrin clot. One of the precursors during thrombin maturation is prethrombin-2, with the presence of Arg363-Ile364 bond between the light and heavy chain of protein, the only distinction from thrombin. Prethrombin-2 is able to interact with less efficiency with a 15-mer thrombin-binding aptamer (TBA). We investigate the interaction of both known conformers of TBA with thrombin and prethrombin-2 by simulation of molecular dynamics. It was shown that TBA could interact with thrombin in both conformations with similar efficiency, although a stable complex of prethrombin-2 with TBA was found only in conformation identical with the aptamer structure, pdb 1HAO. Analysis of molecular dynamics of complexes offered an assumption that the motion of the exosite-1 forming loop Lys428-Ile438 determined the difference in affinity of the complexes of TBA with thrombin and prethrombin-2.     

Macrophage migration in fibrin gel matrices. II. Effects of clotting factor XIII, fibronectin, and glycosaminoglycan content on cell migration

We investigated the migration of oil-induced, guinea pig peritoneal macrophages in three-dimensional fibrin matrices, with particular attention to variables which modified fibrin gel structure and/or its adhesive properties for cells. The variables studied were fibrin concentration, gel cross-linking, and fibronectin and glycosaminoglycan content. Macrophage migration was an inverse linear function of fibrinogen concentration. Little or no fibrinolysis accompanied macrophage migration; rather, macrophages migrated through fibrin gels by an active process associated with marked distortions of cell shape and specialized plasma membrane contacts with fibrin strands. Fibrin matrices prepared from fibrinogen that had been depleted of clotting factor XIII and/or fibronectin provided a superior matrix for macrophage migration. Both the number of migrating cells and distance of migration were reduced when the gel matrix included fibronectin and was cross-linked by factor XIII. A hexapeptide containing the fibronectin cell-binding RGDS sequence reversed this migration inhibition, suggesting that fibronectin immobilized by cross-linking to fibrin may have bound macrophages and restricted cell migration. Hyaluronic acid, heparin, and heparan sulfate inhibited macrophage migration in cross-linked fibrin-fibronectin gels over a range of concentrations. These data are relevant to an understanding of macrophage migration in vivo where cross-linked fibrin-fibronectin gels containing variable amounts of glycosaminoglycans are deposited in tissues in immunologic reactions and in many other types of pathology.     

Decorin synthesized by arterial smooth muscle cells is retained in fibrin gels and modulates fibrin contraction

Fibrin serves as a provisional extracellular matrix (ECM) for arterial smooth muscle cells (ASMC) after vascular injury, yet little is known about the effect of fibrin on ECM remodeling by these cells. To address this question, monkey ASMC were grown on fibrin gels and tissue culture (TC) plastic, and proteoglycan synthesis and accumulation were assessed by radiolabeling. Initial rates of (35)S-sulfate incorporation into proteoglycans were identical for both groups, but increased proteoglycan accumulation was observed in cultures grown for 48 h on fibrin. This increased accumulation on fibrin was due to reduced proteoglycan turnover and retention within the fibrin gel. Decorin and biglycan constituted 40 and 14% of the total proteoglycan in the fibrin gels, whereas their combined contribution was only 12% in control matrices. To explore whether the retention of decorin in fibrin had any influence on the properties of the fibrin gel, ASMC-mediated fibrin contraction assays were performed. Both de novo synthesis of decorin as well as decorin added during polymerization inhibited the ability of the cells to contract fibrin. In contrast, decorin added exogenously to mature fibrin matrices had no effect on fibrin gel contraction. This study illustrates that decorin derived from ASMC selectively accumulates in fibrin and modifies fibrin architecture and mechanical properties. Such an accumulation may influence wound healing and the thrombotic properties of this provisional pro-atherosclerotic ECM.     

Immobilization of aprotinin to fibrinogen as a novel method for controlling degradation of fibrin gels

The goal of this work was to demonstrate that aprotinin conjugated to fibrinogen could (1) maintain its function and (2) control fibrin degradation. Using the chick chorioallantoic membrane (CAM) assay, we found that blood vessels did not directly invade fibrin constructs containing immobilized fibroblast growth factor-2. Because the fibrin quickly degraded within approximately 5 days, we hypothesized that controlling fibrinolysis may improve direct blood vessel invasion. Aprotinin, a protease inhibitor typically added to slow fibrinolysis, is a small protein and can diffuse out of the gel resulting in the loss of fibrinolysis protection. Therefore, using a novel synthesis strategy, aprotinin and a fluorescent reporter, Cy3, were chemically conjugated to fibrinogen. In vitro microplate absorbance assays showed that the conjugated aprotinin was able to inhibit plasmin-mediated fibrin degradation and that its activity was comparable to equimolar levels of soluble, nonconjugated aprotinin. Additionally, we found that fibrinolysis rates could be tuned by varying the level of conjugated aprotinin within the gel. The conjugated aprotinin also demonstrated functionality in vivo. In the chick CAM assay, fibrin gels containing conjugated aprotinin were approximately 5 times larger than gels containing soluble aprotinin after 4 days. Also, in support of our hypothesis, we found that immobilized aprotinin within fibrin gels demonstrated substantial blood vessel invasion.     

Native fibrin gel networks observed by 3D microscopy, permeation and turbidity

Native fully hydrated fibrin gels formed at different fibrinogen and thrombin concentrations and at different ionic strengths were studied by confocal laser 3D microscopy, liquid permeation and turbidity. The gels were found to be composed of straight rod-like fiber elements that often came together at denser nodes. In gels formed at high fibrinogen concentrations, or with high amounts of thrombin, the spaces between the fibers decreased, indicating a decrease of gel porosity. The fiber strands were also shorter. Gel porosity decreased dramatically in gels formed at the high ionic strengths. Shorter fibers were observed and fiber swelling occurred at ionic strengths above 0.24. Quantitative parameters for gel porosity, fiber mass/length ratio and diameter were also derived by liquid permeation and turbidometric analyses of the gels. Permeation analysis showed that gel porosity (measured as Ks) decreased in gels formed at higher fibrin and thrombin concentrations in agreement with the porosity observed by microscopy. The turbidometric analysis showed good agreement with the permeation data for gels formed at various thrombin concentrations, but supported the permeation data more poorly in gels formed at different fibrinogen concentrations, especially above 2.5 mg/ml. Turbidometric analysis showed that the fiber mass/length ratio and diameter decreased in gels formed at ionic strength up to 0.24, as was seen in the permeation study. However, at higher ionic strengths swelling of the fibers was suggested from the gel turbidity data and this was also indicated by microscopy. These findings are discussed in relation to previous hydrodynamic and electron microscopic studies of fibrin gels.     

The behaviour of BHK cells and neutrophil leukocytes on collagen gels of defined mechanical strength

This study demonstrates how the mechanical strength of a series of collagen/composite gels can be measured using a penetrometer. It was found that the presence of fibrin in collagen gels resulted in increased gel strength. Similarly hyaluronic acid was found to increase the strength of collagen gels. Addition of heparin weakened collagen gels as did chondroitin-6-sulphate. Neutrophil migration into collagen gels was found to be inversely proportional to gel strength. Fibrin and hyaluronic acid containing gels inhibited neutrophil migration while the presence of heparin and chondroitin sulphate increased neutrophil migration. BHK gel contraction experiments demonstrated how the presence of fibrin prevents gel contraction. Despite increasing gel strength the presence of hyaluronic acid appeared to have no effect on BHK contraction of collagen gels. Similarly the presence of heparin or chondroitin sulphate had no effect on gel contraction by BHK cells.     

Rheological characterization and dissolution kinetics of fibrin gels crosslinked by a microbial transglutaminase

Various fibrin gels were prepared with a microbial transglutaminase under miscellaneous conditions. The gels were characterized through their rheological properties. The influence of fibronectin addition and that of covalent bonding on the viscoelastic characteristics were evaluated. Gel elasticity is proportional to fibrinogen concentration but shows a nonlinear dependence on transglutaminase concentration. Additional crosslink of fibronectin in fibrin gels has no effect on the rheological character of the matrix. Dissolution kinetics in concentrated urea solutions evidences the role of covalent bonds on gel stability. The rheological properties and gel stability are discussed in relation with the enzyme-catalyzed covalent bonding. The microbial enzyme reactions are compared to those of FXIII and tissue transglutaminases.     

Kinetics of in vitro fibrinolysis by plasmin and a plasmin-streptokinase equimolar complex]

Kinetics of fibrinolysis by plasmin and plasmin streptokinase complex have been studied using fibrin gels formed from purified fibrin and human blood plasma. The gels were placed into buffer or blood plasma. The contributions of plasminogen and alpha 2-antiplasmin present or absent in both phases to the kinetics of fibrinolysis were quantitatively estimated. In the complex catalyzed fibrinolysis, plasminogen activation reaction dominated whereas in plasmin-catalyzed fibrinolysis, the inhibitor involved reaction, suppressing the process, prevailed.     

Transport of probe molecules through fibrin gels as observed by means of holographic relaxation methods

Holographic relaxation spectroscopy (HRS) has been used to study transport of benzospiropyran (SP), BSA labeled with azobenzene (BSA-ABITC), and IgG-κ labeled with fluorescein (IgG-FITC) through fibrin gels formed under various conditions. The structures of the gels were controlled by means of the concentrations of fibrinogen, thrombin, and Ca²⁺ present during assembly of the fibrin. The diffusion coefficient of free dye (SP) was found to be independent of the fibrinogen concentration. The diffusion rate of labeled BSA reflected the assembly conditions of the gel for fibrinogen concentrations above approximately 6 g/L. In particular, the diffusion coefficient was higher in gels formed in the presence of 5 mM Ca²⁺. The labeled IgG showed photoinduced aggregation, as previously reported, as well as photoinduced attachment to the gel network to produce a permanent diffraction grating. Thus IgG is not a probe in the classical sense, but provides a model for protein diffusion and interactions in gels. These studies indicate that HRS is well suited to the study of molecular transport in fibrin gels.