Scleral anisotropy and its effects on the mechanical response of the optic nerve head

This paper presents a computational modeling study of the effects of the collagen fiber structure on the mechanical response of the sclera and the adjacent optic nerve head (ONH). A specimen-specific inverse finite element method was developed to determine the material properties of two human sclera subjected to full-field inflation experiments. A distributed fiber model was applied to describe the anisotropic elastic behavior of the sclera. The model directly incorporated wide-angle X-ray scattering measurements of the anisotropic collagen structure. The converged solution of the inverse method was used in micromechanical studies of the mechanical anisotropy of the sclera at different scales. The effects of the scleral collagen fiber structure on the ONH deformation were evaluated by progressively filtering out local anisotropic features. It was found that the majority of the midposterior sclera could be described as isotropic without significantly affecting the mechanical response of the tissues of the ONH. In contrast, removing local anisotropic features in the peripapillary sclera produced significant changes in scleral canal expansion and lamina cribrosa deformation. Local variations in the collagen structure of the peripapillary sclera significantly influenced the mechanical response of the ONH.     

Age-related changes in human peripapillary scleral strain

To test the hypothesis that mechanical strain in the posterior human sclera is altered with age, 20 pairs of normal eyes from human donors aged 20 to 90 years old were inflation tested within 48-h postmortem. The intact posterior scleral shells were pressurized from 5 to 45 mmHg, while the full-field three-dimensional displacements of the scleral surface were measured using laser speckle interferometry. The full strain tensor of the outer scleral surface was calculated directly from the displacement field. Mean maximum principal (tensile) strain was computed for eight circumferential sectors ( $45^{\circ }$ wide) within the peripapillary and mid-peripheral regions surrounding the optic nerve head (ONH). To estimate the age-related changes in scleral strain, results were fit using a functional mixed effects model that accounts for intradonor variability and spatial autocorrelation. Mechanical tensile strain in the peripapillary sclera is significantly higher than the strain in the sclera farther away from the ONH. Overall, strains in the peripapillary sclera decrease significantly with age. Sectorially, peripapillary scleral tensile strains in the nasal sectors are significantly higher than the temporal sectors at younger ages, but the sectorial strain pattern reverses with age, and the temporal sectors exhibited the highest tensile strains in the elderly. Overall, peripapillary scleral structural stiffness increases significantly with age. The sectorial pattern of peripapillary scleral strain reverses with age, which may predispose adjacent regions of the lamina cribrosa to biomechanical insult. The pattern and age-related changes in sectorial peripapillary scleral strain closely match those seen in disk hemorrhages and neuroretinal rim area measurement change rates reported in previous studies of normal human subjects.     

Viscoelastic characterization of peripapillary sclera: material properties by quadrant in rabbit and monkey eyes

In this report we characterize the viscoelastic material properties of peripapillary sclera from the four quadrants surrounding the optic nerve head in both rabbit and monkey eyes. Scleral tensile specimens harvested from each quadrant were subjected to uniaxial stress relaxation and tensile ramp to failure tests. Linear viscoelastic theory, coupled with a spectral reduced relaxation function, was employed to characterize the viscoelastic properties of the tissues. We detected no differences in the stress-strain curves of specimens from the four quadrants surrounding the optic nerve head (ONH) below a strain of 4 percent in either the rabbit or monkey. While the peripapillary sclera from monkey eyes is significantly stiffer (both instantaneously and in equilibrium) and relaxes more slowly than that from rabbits, we detected no differences in the viscoelastic material properties (tested at strains of 0-1 percent) of sclera from the four quadrants surrounding the ONH within either species group.     

Depth-Dependent Changes in Collagen Organization in the Human Peripapillary Sclera

PurposeThe collagen structure of the human peripapillary sclera plays a significant role in determining optic nerve head (ONH) biomechanics, and is therefore of interest in the study of glaucoma. The aim of the current work was to map the anisotropic collagen structure of the normal human peripapillary sclera as a function of tissue depth.MethodsWide-angle x-ray scattering was used to quantify collagen fibril orientation at 0.5mm intervals across six 150μm-thick serial sections through the peripapillary sclera of eight normal European-derived human eyes. Two structural parameters were measured: 1) the relative number of fibrils preferentially aligned at a given angle within the tissue plane, 2) the degree of collagen alignment (anisotropy).ResultsThe inner-most one-third of the peripapillary scleral stroma (nearest to the choroid) was characterised by collagen fibrils either randomly arranged or preferentially aligned radially with respect to the ONH. In contrast, the outer two-thirds of the tissue was dominated by a circumferential arrangement of collagen encircling the ONH. In all tissue regions the degree of collagen anisotropy peaked in the mid-stroma and progressively decreased towards the tissue surfaces, with the largest depth variations occurring in the inferior-nasal quadrant, and the smallest occurring in the superior-nasal quadrant.ConclusionsSignificant, region-specific variations in collagen structure are present in the human peripapillary sclera as a function of depth. In normal eyes, the circumferential collagen fibril architecture is most prominent in the outer two-thirds of the stroma, possibly as a mechanical adaption to more effectively support the lamina cribrosa at the level of its insertion into the scleral canal wall.     

A gimbal-mounted pressurization chamber for macroscopic and microscopic assessment of ocular tissues

The biomechanical model of glaucoma considers intraocular pressure-related stress and resultant strain on load bearing connective tissues of the optic nerve and surrounding peripapillary sclera as one major causative influence that effects cellular, vascular, and axonal components of the optic nerve. By this reasoning, the quantification of variations in the microstructural architecture and macromechanical response of scleral shells in glaucomatous compared to healthy populations provides an insight into any variations that exist between patient populations. While scleral shells have been tested mechanically in planar and pressure-inflation scenarios the link between the macroscopic biomechanical response and the underlying microstructure has not been determined to date. A potential roadblock to determining how the microstructure changes based on pressure is the ability to mount the spherical scleral shells in a method that does not induce unwanted stresses to the samples (for instance, in the flattening of the spherical specimens), and then capturing macroscopic and microscopic changes under pressure. Often what is done is a macroscopic test followed by sample fixation and then imaging to determine microstructural organization. We introduce a novel device and method, which allows spherical samples to be pressurized and macroscopic and microstructural behavior quantified on fully hydrated ocular specimens. The samples are pressurized and a series of markers on the surface of the sclera imaged from several different perspectives and reconstructed between pressure points to allow for mapping of nonhomogenous strain. Pictures are taken from different perspectives through the use of mounting the pressurization scheme in a gimbal that allows for positioning the sample in several different spherical coordinate system configurations. This ability to move the sclera in space about the center of the globe, coupled with an upright multiphoton microscope, allows for collecting collagen, and elastin signal in a rapid automated fashion so the entire globe can be imaged.     

Experimental surface strain mapping of porcine peripapillary sclera due to elevations of intraocular pressure

To experimentally characterize 2D surface mapping of the deformation pattern of porcine peripapillary sclera following acute elevations of intraocular pressure (IOP) from 5 mm Hg to 45 mm Hg. Four porcine eyes were obtained within 48 h postmortem and dissected to the sclera. After the anterior chamber was removed, each posterior scleral shell was individually mounted at the equator on a custom-built pressurization device, which internally pressurized the scleral samples with isotonic saline at 22 degrees C. Black polystyrene microspheres (10 microm in diameter) were randomly scattered and attached to the scleral surface. IOP was incrementally increased from 5 mm Hg to 45 mm Hg (+/-0.15 mm Hg), and the surface deformation of the peripapillary sclera immediately adjacent to the dural insertion was optically tracked at a resolution of 2 micrompixel one quadrant at a time, for each of four quadrants (superior, nasal, inferior, and temporal). The 2D displacement data of the microsphere markers were extracted using the optical flow equation, smoothed by weighting function interpolation, and converted to the corresponding Lagrangian finite surface strain. In all four quadrants of each eye, the principal strain was highest and primarily circumferential immediately adjacent to the scleral canal. Average maximum Lagrangian strain across all quadrants for all eyes was 0.013+/-0.005 from 5 mm Hg to 10 mm Hg, 0.014+/-0.004 from 10 mm Hg to 30 mm Hg and 0.004+/-0.001 from 30 mm Hg to 45 mm Hg, demonstrating the nonlinearity in the IOP-strain relationship. For each scleral shell, the observed surface strain mapping implied that the scleral stiffness was relatively low between 5 mm Hg and 10 mm Hg, but dramatically increased for each IOP elevation increment beyond 10 mm Hg. Peripapillary deformation following an acute IOP elevation may be governed by the underlying scleral collagen microstructure and is likely in the high-stiffness region of the scleral stress-strain curve when IOP is above 10 mm Hg.     

The collagen fibril architecture in the lamina cribrosa and peripapillary sclera predicted by a computational remodeling approach

The biomechanics of the optic nerve head is assumed to play an important role in ganglion cell loss in glaucoma. Organized collagen fibrils form complex networks that introduce strong anisotropic and nonlinear attributes into the constitutive response of the peripapillary sclera (PPS) and lamina cribrosa (LC) dominating the biomechanics of the optic nerve head. The recently presented computational remodeling approach (Grytz and Meschke in Biomech Model Mechanobiol 9:225–235, 2010) was used to predict the micro-architecture in the LC and PPS, and to investigate its impact on intraocular pressure–related deformations. The mechanical properties of the LC and PPS were derived from a microstructure-oriented constitutive model that included the stretch-dependent stiffening and the statistically distributed orientations of the collagen fibrils. Biomechanically induced adaptation of the local micro-architecture was captured by allowing collagen fibrils to be reoriented in response to the intraocular pressure–related loading conditions. In agreement with experimental observations, the remodeling algorithm predicted the existence of an annulus of fibrils around the scleral canal in the PPS, and a predominant radial orientation of fibrils in the periphery of the LC. The peripapillary annulus significantly reduced the intraocular pressure–related expansion of the scleral canal and shielded the LC from high tensile stresses. The radial oriented fibrils in the LC periphery reinforced the LC against transversal shear stresses and reduced LC bending deformations. The numerical approach presents a novel and reasonable biomechanical explanation of the spatial orientation of fibrillar collagen in the optic nerve head.     

Mathematical modeling of the biomechanics of the lamina cribrosa under elevated intraocular pressures

Comprehensive understanding of the biomechanical performance of the lamina cribrosa (LC) and the optic nerve head is central to understanding the role of elevated intraocular pressures (IOP) in chronic open angle glaucoma. In this paper, six closed-from mathematical models based on different idealizations of the LC are developed and compared. This approach is used to create further understanding of the biomechanical behavior by identifying the LC features and properties that have a significant effect on its performance under elevated IOP. The models developed are based on thin circular plate and membrane theories, and consider influences such as in-plane pretension caused by scleral expansion and large deflections. Comparing the results of the six models against a full ocular globe finite element model suggests the significance of the in-plane pretension and the importance of assuming that the sclera provides the LC with a clamped edge. The model that provided the most accurate representation of the finite element model was also used to predict the behavior of a number of LC experimental tests presented in the literature. In addition to the deflections under elevated IOP, the model predictions include the distributions of stress and strain, which are shown to be compatible with the progression of visual field loss experienced in glaucoma.     

紫外光-核黄素交联法对豚鼠巩膜生物力学特性的影响

目的探索紫外光-核黄素交联法对巩膜织张力和强度的影响。方法交联组和对照组皆选右眼为实验眼,交联组采用波长为（370±5）nm、辐射强度定为3.0 mW/cm2的紫外线和0.1%核黄素为光敏剂对豚鼠赤道部巩膜面进行胶原交联,对照组不进行交联处理。术后一个月取交联组交联区巩膜条带和对照组相应区域的巩膜条带,进行生物力学测试,并对眼球各组织进行HE染色光镜和透射电镜检测。结果交联组巩膜的生物力学特性增强,赤道部交联组巩膜试件断裂时的极限应力增加了147%,弹性模量显著增加了193%,极限应变降低了21.9%;后极部交联组巩膜试件断裂时的极限应力增加了108%,弹性模量显著增加了191%,极限应变降低了40.42%。HE染色光镜检查结果显示形态学无病理改变,透射电镜结果显示交联组交联区的巩膜成纤维细胞增生活跃。结论紫外光—核黄素交联法可以有效地提高巩膜的生物力学特性,增强巩膜组织的张力和强度,有望作为治疗高度病理性近视的一种方法。     

Verification of a virtual fields method to extract the mechanical properties of human optic nerve head tissues in vivo

We aimed to verify a custom virtual fields method (VFM) to estimate the patient-specific biomechanical properties of human optic nerve head (ONH) tissues, given their full-field deformations induced by intraocular pressure (IOP). To verify the accuracy of VFM, we first generated ‘artificial’ ONH displacements from predetermined (known) ONH tissue biomechanical properties using finite element analysis. Using such deformations, if we are able to match back the known biomechanical properties, it would indicate that our VFM technique is accurate. The peripapillary sclera was assumed anisotropic hyperelastic, while all other ONH tissues were considered isotropic. The simulated ONH displacements were fed into the VFM algorithm to extract back the biomechanical properties. The robustness of VFM was also tested against rigid body motions and noise added to the simulated displacements. Then, the computational speed of VFM was compared to that of a gold-standard stiffness measurement method (inverse finite element method or IFEM). Finally, as proof of principle, VFM was applied to IOP-induced ONH deformation data (obtained from one subject’s eye imaged with OCT), and the biomechanical properties of the prelamina and lamina cribrosa (LC) were extracted. From given ONH displacements, VFM successfully matched back the biomechanical properties of ONH tissues with high accuracy and efficiency. For all parameters, the percentage errors were less than 0.05%. Our method was insensitive to rigid body motions and was also able to recover the material parameters in the presence of noise. VFM was also found 125 times faster than the gold-standard IFEM. Finally, the estimated shear modulus for the prelamina and the LC of the studied subject’s eye were 33.7 and 63.5 kPa, respectively. VFM may be capable of measuring the biomechanical properties of ONH tissues with high speed and accuracy. It has potential in identifying patient-specific ONH biomechanical properties in the clinic if combined with optical coherence tomography.     

CXC‐ receptor 2 promotes extracellular matrix production and attenuates migration in peripapillary human scleral fibroblasts under mechanical strain

As the main loading‐bearing tissue of eye, sclera exerts an important role in the pathophysiology of glaucoma. Intraocular pressure (IOP) generates mechanical strain on sclera. Recent studies have demonstrated that sclera, especially the peripapillary sclera, undergoes complicated remodelling under the mechanical strain. However, the mechanisms of the hypertensive scleral remodelling in human eyes remained uncertain. In this study, peripapillary human scleral fibroblasts (ppHSFs) were applied cyclic mechanical strain by Flexcell‐5000™ tension system. We found that CXC‐ ligands and CXCR2 were differentially expressed after strain. Increased cell proliferation and inhibited cell motility were observed when CXCR2 was upregulated under the strain, whereas cell proliferation and motility did not have a significant change when CXCR2 was knocked down. CXCR2 could facilitate cell proliferation ability, modulate the mRNA and protein expressions of type I collagen and matrix metalloproteinase 2 via JAK1/2‐STAT3 signalling pathway. In addition, CXCR2 might inhibit cell migration via FAK/MLC₂ pathway. Taken together, CXCR2 regulated protein production and affected cell behaviours of ppHSFs. It might be a potential therapeutic target for the hypertensive scleral remodelling.     

A forward incremental prestressing method with application to inverse parameter estimations and eye-specific simulations of posterior scleral shells

Numerical simulations or inverse numerical analyses of individual eyes or eye segments are often based on an eye-specific geometry obtained from in vivo medical images such as computed tomography (CT) scans or from in vitro 3D digitiser scans. These eye-specific geometries are usually measured while the eye is subjected to internal pressure. Due to the nonlinear stiffening of the collagen fibril network in the eye, numerical incorporation of the pre-existing stress/strain state may be essential for realistic eye-specific computational simulations. Existing prestressing methods either compute accurate predictions of the prestressed state or guarantee a unique solution. In this contribution, a forward incremental prestressing method is presented which unifies the advantages of the existing approaches by providing accurate and unique predictions of the pre-existing stress/strain state at the true measured geometry. The impact of prestressing is investigated on (i) the inverse constitutive parameter identification of a synthetic sclera inflation test and (ii) an eye-specific simulation that estimates the realistic mechanical response of a pre-loaded posterior monkey scleral shell. Evaluation of the pre-existing stress/strain state in the inverse analysis had a significant impact on the reproducibility of the constitutive parameters but may be estimated based on an approximative approach. The eye-specific simulation of one monkey eye shows that prestressing is required for accurate displacement and stress/strain predictions. The numerical results revealed an increasing error in displacement, strain and stress predictions with increasing pre-existing pressure load when the pre-stress/strain state is disregarded. Disregarding the prestress may lead to a significant underestimation of the strain/stress environment in the sclera and overestimation in the lamina cribrosa.     

Ultrasonic measurement of scleral cross-sectional strains during elevations of intraocular pressure: method validation and initial results in posterior porcine sclera

Background. Scleral biomechanical properties may be important in the pathogenesis and progression of glaucoma. The goal of this study is to develop and validate an ultrasound method for measuring cross-sectional distributive strains in the sclera during elevations of intraocular pressure (IOP). Method of Approach. Porcine globes (n?=?5) were tested within 24 hs postmortem. The posterior scleral shells were dissected and mounted onto a custom-built pressurization chamber. A high-frequency (55-MHz) ultrasound system (Vevo660, VisualSonics Inc., Toronto) was employed to acquire the radio frequency data during scans of the posterior pole along both circumferential and meridian directions. The IOP was gradually increased from 5 to 45?mmHg. The displacement fields were obtained from correlation-based ultrasound speckle tracking. A least-square strain estimator was used to calculate the strains in both axial and lateral directions. Experimental validation was performed by comparing tissue displacements calculated from ultrasound speckle tracking with those induced by an actuator. Theoretical analysis and simulation experiments were performed to optimize the ultrasound speckle tracking method and evaluate the accuracy and signal-to-noise ratio (SNR) in strain estimation. Results. Porcine sclera exhibited significantly larger axial strains (e.g., -5.1?±?1.5% at 45?mmHg, meridian direction) than lateral strains (e.g., 2.2?±?0.7% at 45?mmHg, meridian direction) during IOP elevations (P's?相似文献   

Biaxial mechanical testing of posterior sclera using high-resolution ultrasound speckle tracking for strain measurements

This study aimed to characterize the mechanical responses of the sclera, the white outer coat of the eye, under equal-biaxial loading with unrestricted shear. An ultrasound speckle tracking technique was used to measure tissue deformation through sample thickness, expanding the capabilities of surface strain techniques. Eight porcine scleral samples were tested within 72 h postmortem  . High resolution ultrasound scans of scleral cross-sections along the two loading axes were acquired at 25 consecutive biaxial load levels. An additional repeat of the biaxial loading cycle was performed to measure a third normal strain emulating a strain gage rosette for calculating the in-plane shear. The repeatability of the strain measurements during identical biaxial ramps was evaluated. A correlation-based ultrasound speckle tracking algorithm was used to compute the displacement field and determine the distributive strains in the sample cross-sections. A Fung type constitutive model including a shear term was used to determine the material constants of each individual specimen by fitting the model parameters to the experimental stress–strain data. A non-linear stress–strain response was observed in all samples. The meridian direction had significantly larger strains than that of the circumferential direction during equal-biaxial loadings (P's<0.05$P\text{'}s<0.05$). The stiffness along the two directions was also significantly different (P=0.02) but highly correlated (R²=0.8). These results showed that the mechanical properties of the porcine sclera were nonlinear and anisotropic under biaxial loading. This work has also demonstrated the feasibility of using ultrasound speckle tracking for strain measurements during mechanical testing.     

Dynamic material properties of the human sclera

As a result of trauma, approximately 30,000 people become blind in one eye every year in the United States. A common injury prediction tool is computational modeling, which requires accurate material properties to produce reliable results. Therefore, the purpose of this study was to determine the dynamic material properties of the human sclera. A high-rate pressurization system was used to create dynamic pressure to the point of rupture in 12 human eyes. Measurements were obtained for the internal pressure, the diameter of the globe, the thickness of the sclera, and the changing coordinates of the optical markers using high-rate video. A relationship between true stress and true strain was determined for the sclera tissue in two directions. It was found that the average maximum true stress was 13.89±4.81 MPa for both the equatorial and meridional directions, the average maximum true strain along the equator was 0.041±0.014, and the average maximum true strain along the meridian was 0.058±0.018. Results show a significant difference in the maximum strain in the equatorial and meridional directions (p=0.02). In comparing these data with previous studies, it is concluded that the human sclera is both anisotropic and viscoelastic. The dynamic material properties presented in this study can be used for advanced models of the human eye to help prevent eye injuries in the future.     

Whole Vitreous Humor Dissection for Vitreodynamic Analysis

The authors propose an effective technique to isolate whole, intact vitreous core and cortex from post mortem enucleated porcine eyes. While previous studies have shown the results of such dissections, the detailed steps have not been described, precluding researchers outside the field from replicating their methods. Other studies harvest vitreous either through aspiration, which does not maintain the vitreous structure anatomy, or through partial dissection, which only isolates the vitreous core. The proposed method isolates the whole vitreous body, with the vitreous core and cortex intact, while maintaining vitreous anatomy and structural integrity. In this method, a full thickness scleral flap in an enucleated porcine eye is first created and through this, the choroid tissue can be separated from the sclera. The scleral flap is then expanded and the choroid is completely separated from the sclera. Finally the choroid-retina tissue is peeled off the vitreous to leave an isolated intact vitreous body. The proposed vitreous dissection technique can be used to study physical properties of the vitreous humor. In particular, this method has significance for experimental studies involving drug delivery, vitreo-retinal oxygen transport, and intraocular convection.     

Modeling individual-specific human optic nerve head biomechanics. Part I: IOP-induced deformations and influence of geometry

Glaucoma, the second most common cause of blindness worldwide, is an ocular disease characterized by progressive loss of retinal ganglion cell (RGC) axons. Biomechanical factors are thought to play a central role in RGC loss, but the specific mechanism underlying this disease remains unknown. Our goal was to characterize the biomechanical environment in the optic nerve head (ONH)—the region where RGC damage occurs—in human eyes. Post mortem human eyes were imaged, fixed at either 5 or 50 mmHg pressure and processed histologically to acquire serial sections through the ONH. Three-dimensional models of the ONH region were reconstructed from these sections and embedded in a generic scleral shell to create a model of an entire eye. We used finite element simulations to quantify the effects of an acute change in intraocular pressure from 5 to 50 mmHg on the ONH biomechanical environment. Computed strains varied substantially within the ONH, with the pre-laminar neural tissue and the lamina cribrosa showing the greatest strains. The mode of strain having the largest magnitude was third principal strain (compression), reaching 12–15% in both the lamina cribrosa and the pre-laminar neural tissue. Shear strains were also substantial. The distribution of strains in all ONH tissues was remarkably similar between eyes. Inter-individual variations in ONH geometry (anatomy) have only modest effects on ONH biomechanics, and may not explain inter-individual susceptibility to elevated intraocular pressure. Consistent with previous results using generic ONH models, the displacements of the vitreo-retinal interface and the anterior surface of the lamina cribrosa can differ substantially, suggesting that currently available optical imaging methods do not provide information of the acute deformations within ONH tissues. Predicted strains within ONH tissues are potentially biologically significant and support the hypothesis that biomechanical factors contribute to the initial insult that leads to RGC loss in glaucoma. Ian A. Sigal now a post-doctoral research fellow at Ocular Biomechanics Laboratory, Devers Eye Institute, Legacy Health Research. Portland, OR, USA. (isigal@deverseye.org).     

Material properties and effect of preconditioning of human sclera,optic nerve,and optic nerve sheath

The optic nerve (ON) is a recently recognized tractional load on the eye during larger horizontal eye rotations. In order to understand the mechanical behavior of the eye during adduction, it is necessary to characterize material properties of the sclera, ON, and in particular its sheath. We performed tensile loading of specimens taken from fresh postmortem human eyes to characterize the range of variation in their biomechanical properties and determine the effect of preconditioning. We fitted reduced polynomial hyperelastic models to represent the nonlinear tensile behavior of the anterior, equatorial, posterior, and peripapillary sclera, as well as the ON and its sheath. For comparison, we analyzed tangent moduli in low and high strain regions to represent stiffness. Scleral stiffness generally decreased from anterior to posterior ocular regions. The ON had the lowest tangent modulus, but was surrounded by a much stiffer sheath. The low-strain hyperelastic behaviors of adjacent anatomical regions of the ON, ON sheath, and posterior sclera were similar as appropriate to avoid discontinuities at their boundaries. Regional stiffnesses within individual eyes were moderately correlated, implying that mechanical properties in one region of an eye do not reliably reflect properties of another region of that eye, and that potentially pathological combinations could occur in an eye if regional properties are discrepant. Preconditioning modestly stiffened ocular tissues, except peripapillary sclera that softened. The nonlinear mechanical behavior of posterior ocular tissues permits their stresses to match closely at low strains, although progressively increasing strain causes particularly great stress in the peripapillary region.

     

Material properties of the cornea and sclera: a modelling approach to test experimental analysis

Material properties of cornea and sclera are important for maintaining the shape of the eye and the requisite surface curvatures for optics. They also need to withstand the forces of external and internal musculature and fluctuations in intraocular pressure (IOP). These properties are difficult to measure and variable results have been reported. A previously published experimental procedure, from which the material properties of the eyeball coats were obtained, has been modelled in this paper using Finite Element Analysis, in order to test the accuracy of the experiment. Material parameters were calculated from the model and the resulting relationships between stress and strain for the cornea and sclera compared to their experimentally obtained counterparts. The comparison between model and experiment was close for the sclera but more varied for the cornea. The pressure vessel model can be applied for measuring the material properties of the sclera but is less accurate for the cornea.