Molecular determination by electron microscopy of the actin filament end structure

In eukaryotic cells, actin filaments play various crucial roles by altering their spatial and temporal distributions in the cell. The distribution of actin filaments is regulated by the binding of end-binding proteins, including capping protein (CapZ in muscle), the Arp2/3 complex, gelsolin, formin and tropomodulin, to the end of the actin filament. In order to determine the nature of these regulations, structural elucidations of actin filament-end-binding protein complexes are crucially important. Here, we have developed new procedures on the basis of single-particle analysis to determine the structure of the end of actin filaments from electron micrographs. In these procedures, the polarity of the actin filament image, as well as the azimuth orientation and the axial position of each actin protomer within a short stretch near the filament end, were determined accurately. This improved both the stability and accuracy of the structural determination dramatically. We tested our procedures by reconstructing structures from simulated filament images, which were obtained from 24 model structures for the actin-CapZ complex. These model structures were generated by random docking of the atomic structure of CapZ to the barbed end of an atomic model of the actin filament. Of the 24 model structures, 23 were recovered correctly by the present procedures. We found that our analysis was robust against local aberrations of the helical twist near the end of the actin filament. Finally, the procedures were applied successfully to determine the structure of the actin-CapZ complex from real cryo-electron micrographs of the complex. This is the first method for elucidating the detailed 3D structures at the end of the actin filament.     

Structure of the Blm10-20 S proteasome complex by cryo-electron microscopy. Insights into the mechanism of activation of mature yeast proteasomes

The 20 S proteasome is regulated at multiple levels including association with endogenous activators. Two activators have been described for the yeast 20 S proteasome: the 19 S regulatory particle and the Blm10 protein. The sequence of Blm10 is 20% identical to the mammalian PA200 protein. Recent studies have shown that the sequences of Blm10 and PA200 each contain multiple HEAT-repeats and that each binds to the ends of mature proteasomes, suggesting a common structural and biochemical function. In order to advance structural studies, we have developed an efficient purification method that produces high yields of stoichiometric Blm10-mature yeast 20 S proteasome complexes and we constructed a three-dimensional (3D) model of the Blm10-20 S complex from cryo-electron microscopy images. This reconstruction shows that Blm10 binds in a defined orientation to both ends of the 20 S particle and contacts all the proteasome alpha subunits. Blm10 displays the solenoid folding predicted by the presence of multiple HEAT-like repeats and the axial gates on the alpha rings of the proteasome appear to be open in the complex. We also performed a genetic analysis in an effort to identify the physiological role of Blm10. These experiments, however, did not reveal a robust phenotype upon gene deletion, overexpression, or in a screen for synthetic effects. This leaves the physiological role of Blm10 unresolved, but challenges earlier findings of a role in DNA repair.     

High-resolution electron microscopy of helical specimens: a fresh look at tobacco mosaic virus

The treatment of helical objects as a string of single particles has become an established technique to resolve their three-dimensional (3D) structure using electron cryo-microscopy. It can be applied to a wide range of helical particles such as viruses, microtubules and helical filaments. We have made improvements to this approach using Tobacco Mosaic Virus (TMV) as a test specimen and obtained a map from 210,000 asymmetric units at a resolution better than 5 A. This was made possible by performing a full correction of the contrast transfer function of the microscope. Alignment of helical segments was helped by constraints derived from the helical symmetry of the virus. Furthermore, symmetrization was implemented by multiple inclusions of symmetry-related views in the 3D reconstruction. We used the density map to build an atomic model of TMV. The model was refined using a real-space refinement strategy that accommodates multiple conformers. The atomic model shows significant deviations from the deposited model for the helical form of TMV at the lower-radius region (residues 88 to 109). This region appears more ordered with well-defined secondary structure, compared with the earlier helical structure. The RNA phosphate backbone is sandwiched between two arginine side-chains, stabilizing the interaction between RNA and coat protein. A cluster of two or three carboxylates is buried in a hydrophobic environment isolating it from neighboring subunits. These carboxylates may represent the so-called Caspar carboxylates that form a metastable switch for viral disassembly. Overall, the observed differences suggest that the new model represents a different, more stable state of the virus, compared with the earlier published model.     

A new cryo-EM single-particle ab initio reconstruction method visualizes secondary structure elements in an ATP-fueled AAA+ motor

The generation of ab initio three-dimensional (3D) models is a bottleneck in the studies of large macromolecular assemblies by single-particle cryo-electron microscopy. We describe here a novel method, in which established methods for two-dimensional image processing are combined with newly developed programs for joint rotational 3D alignment of a large number of class averages (RAD) and calculation of 3D volumes from aligned projections (VolRec). We demonstrate the power of the method by reconstructing an ∼ 660-kDa ATP-fueled AAA+ motor to 7.5 Å resolution, with secondary structure elements identified throughout the structure. We propose the method as a generally applicable automated strategy to obtain 3D reconstructions from unstained single particles imaged in vitreous ice.     

The quaternary structure of a calcium-permeable AMPA receptor: conservation of shape and symmetry across functionally distinct subunit assemblies

AMPA receptors (AMPA-Rs) are formed as heterotetrameric combinations of subunits known as GluR1-GluR4. The calcium permeability of AMPA-Rs is controlled by the identity of the amino-acid side chain contributed by each subunit at a key position in the conductance pathway, which can be either a glutamine (Q) or an arginine (R). Tetramers assembled only from Q-containing subunits are calcium permeable. In contrast, tetramers that incorporate R-containing subunits are calcium impermeable. Both forms play key roles in physiological and pathophysiological processes in the central nervous system. Here, using electron microscopy, we present the first quaternary structure of a calcium-permeable Q-homomeric AMPA-R. The receptor is elongated, with overall 2-fold symmetry and a large central vestibule. It is thus similar to the structure previously reported for an AMPA-R assembled exclusively from R-subunits. Both structures differ from those reported for brain-derived but urea-washed “native” AMPA-Rs, which exhibited multiple asymmetrical conformations. However, even transient exposure of our Q-homomeric AMPA-Rs to urea significantly attenuates the binding of a conformationally specific antibody. As a result, we propose a model in which all AMPA-Rs share a 2-fold symmetrical structure and in which subunit-dependent differences in assembly, trafficking, and electrophysiology are mediated within the framework of fundamentally similar quaternary conformations.     

Nautilus pompilius hemocyanin: 9 A cryo-EM structure and molecular model reveal the subunit pathway and the interfaces between the 70 functional units

Hemocyanins are giant extracellular oxygen carriers in the hemolymph of many molluscs. Nautilus pompilius (Cephalopoda) hemocyanin is a cylindrical decamer of a 350 kDa polypeptide subunit that in turn is a “pearl-chain” of seven different functional units (FU-a to FU-g). Each globular FU has a binuclear copper centre that reversibly binds one O₂ molecule, and the 70-FU decamer is a highly allosteric protein. Its primary structure and an 11 Å cryo-electron microscopy (cryo-EM) structure have recently been determined, and the crystal structures of two related FU types are available in the databanks. However, in molluscan hemocyanin, the precise subunit pathway within the decamer, the inter-FU interfaces, and the allosteric unit are still obscure, but this knowledge is crucial to understand assembly and allosterism of these proteins. Here we present the cryo-EM structure of Nautilus hemocyanin at 9.1 Å resolution (FSC_1/2-bit criterion), and its molecular model obtained by rigid-body fitting of the individual FUs. In this model we identified the subunit dimer, the subunit pathway, and 15 types of inter-FU interface. Four interface types correspond to the association mode of the two protomers in the published Octopus FU-g crystal. Other interfaces explain previously described morphological structures such as the fenestrated wall (which shows D5 symmetry), the three horizontal wall tiers, the major and minor grooves, the anchor structure and the internal collar (which unexpectedly has C5 symmetry). Moreover, the potential calcium/magnesium and N-glycan binding sites have emerged. Many interfaces have amino acid constellations that might transfer allosteric interaction between FUs. From their topologies we propose that the prime allosteric unit is the oblique segment between major and minor groove, consisting of seven FUs from two different subunits. Thus, the 9 Å structure of Nautilus hemocyanin provides fundamentally new insight into the architecture and function of molluscan hemocyanins.     

Structural characterisation of the insecticidal toxin XptA1, reveals a 1.15 MDa tetramer with a cage-like structure

A recently identified class of proteins conferring insecticidal activity to several bacteria within the Enterobacteriaceae family have potential for control of commercially important insect pests. Here, we report the first purification, biophysical characterisation and 3-D structural analysis of one of the toxin components, XptA1, from Xenorhabdus nematophila PMFI296 to a resolution of 23 A. Membrane binding studies indicate that the three-component toxin system has a different mode of action from that of proteins from Bacillus thuringiensis (Bt). Biophysical characterisation of XptA1 suggests a mechanism of action of XptA1 whereby it first binds to the cell membrane forming a structure with a central cavity and forms a complex with its partners XptB1 and XptC1 producing the full insecticidal toxin. The structure of XptA1 is shown by a combination of electron microscopy, ultracentrifugation and circular dichroism spectroscopy to be a 1.15 MDa tetramer with a cage-like structure. Each of the four symmetry-related subunits has three well-defined domains and a longitudinal twist with one end narrower than the other. One third of the residues of XptA1 are alpha-helical and it is suggested the subunits associate partly via an alpha-helical coiled-coil interaction. XptA1 itself shows the same secondary structure at neutral pH and in an alkaline environment up to pH10.5. This pH tolerance indicates that the folded XptA1 can pass through the midgut of Lepidopteran insects susceptible to the insecticidal toxin complex. This implies therefore that its folded structure is important for its biological activity.     

Structural analysis of the Saf pilus by electron microscopy and image processing

Bacterial pili are important virulence factors involved in host cell attachment and/or biofilm formation, key steps in establishing and maintaining successful infection. Here we studied Salmonella atypical fimbriae (or Saf pili), formed by the conserved chaperone/usher pathway. In contrast to the well-established quaternary structure of typical/FGS-chaperone assembled, rod-shaped, chaperone/usher pili, little is known about the supramolecular organisation in atypical/FGL-chaperone assembled fimbriae. In our study, we have used negative stain electron microscopy and single-particle image analysis to determine the three-dimensional structure of the Salmonella typhimurium Saf pilus. Our results show atypical/FGL-chaperone assembled fimbriae are composed of highly flexible linear multi-subunit fibres that are formed by globular subunits connected to each other by short links giving a “beads on a string”-like appearance. Quantitative fitting of the atomic structure of the SafA pilus subunit into the electron density maps, in combination with linker modelling and energy minimisation, has enabled analysis of subunit arrangement and intersubunit interactions in the Saf pilus. Short intersubunit linker regions provide the molecular basis for flexibility of the Saf pilus by acting as molecular hinges allowing a large range of movement between consecutive subunits in the fibre.     

Molecular machinery of autophagosome formation in yeast, Saccharomyces cerevisiae

Autophagy is a degradation process accompanied by dynamic membrane organization. In the yeast, Saccharomyces cerevisiae, about 30 ATG (autophagy-related) genes have been identified as important genes for autophagy. Among them, 17 are indispensable for formation of the autophagosome, an organelle enclosed by a double lipid bilayer during starvation-induced autophagy. Recently, a central structure for autophagosome generation, termed the pre-autophagosomal structure, was identified. Despite intensive study, many questions regarding the mechanisms underlying autophagosome formation remain unanswered. In this review, we will give an overview of recent studies on the mechanisms of autophagosome formation and discuss these unresolved questions.     

Cryo-EM structure of dodecameric Vps4p and its 2:1 complex with Vta1p

The type I AAA (ATPase associated with a variety of cellular activities) ATPase Vps4 and its co-factor Vta1p/LIP5 function in membrane remodeling events that accompany cytokinesis, multivesicular body biogenesis, and retrovirus budding, apparently by driving disassembly and recycling of membrane-associated ESCRT (endosomal sorting complex required for transport)-III complexes. Here, we present electron cryomicroscopy reconstructions of dodecameric yeast Vps4p complexes with and without their microtubule interacting and transport (MIT) N-terminal domains and Vta1p co-factors. The ATPase domains of Vps4p form a bowl-like structure composed of stacked hexameric rings. The two rings adopt dramatically different conformations, with the “upper” ring forming an open assembly that defines the sides of the bowl and the lower ring forming a closed assembly that forms the bottom of the bowl. The N-terminal MIT domains of the upper ring localize on the symmetry axis above the cavity of the bowl, and the binding of six extended Vta1p monomers causes additional density to appear both above and below the bowl. The structures suggest models in which Vps4p MIT and Vta1p domains engage ESCRT-III substrates above the bowl and help transfer them into the bowl to be pumped through the center of the dodecameric assembly.     

Crystal Structures of Limulus SAP-Like Pentraxin Reveal Two Molecular Aggregations

The serum-amyloid-P-component-like pentraxin from Limulus polyphemus, a recently discovered pentraxin species and important effector protein of the hemolymph immune system, displays two distinct doubly stacked cyclic molecular aggregations, heptameric and octameric. The refined three-dimensional structures determined by X-ray crystallography, both based on the same cDNA sequence, show that each aggregate is constructed from a similar dimer of protomers, which is repeated to make up the ring structure. The native octameric form has been refined at a resolution of 3 Å, the native heptameric form at 2.3 Å, and the phosphoethanolamine (PE)-bound octameric form at 2.7 Å. The existence of the hitherto undescribed heptameric form was confirmed by single-particle analysis using cryo-electron microscopy. In the native structures, the calcium-binding site is similar to that in human pentraxins, with two calcium ions bound in each subunit. Upon binding PE, however, each subunit binds a third calcium ion, with all three calcium ions contributing to the binding and orientation of the bound phosphate group within the ligand-binding pocket. While the phosphate is well-defined in the electron density, the ethanolamine group is poorly defined, suggesting structural and binding variabilities of this group. Although sequence homology with human serum amyloid P component is relatively low, structural homology is high, with very similar overall folds and a common affinity for PE. This is due, in part, to a “topological” equivalence of side-chain position. Identical side chains that are important in both function and fold, from different regions of the sequence in human and Limulus structures, occupy similar space within the overall subunit fold. Sequence and structure alignment, based on the refined three-dimensional structures presented here and the known horseshoe crab pentraxin sequences, suggest that adaptation and refinement of C-reactive-protein-mediated immune responses in these ancient creatures lacking antibody-based immunity are based on adaptation by gene duplication.     

SNAP-23 is not essential for constitutive exocytosis in HeLa cells

We applied the small interfering RNA (siRNA) technique and over-expression of a dominant-negative mutant to evaluate the role of SNAP-23, a non-neuronal isoform of SNAP-25, in constitutive exocytosis from HeLa cells. Although the protein level of SNAP-23 was reduced to less than 10% of the control value by siRNA directed against SNAP-23, exocytosis of SEAP (secreted alkaline phosphatase) was normal. Double knockdown of SNAP-23 and syntaxin-4 also failed to inhibit the secretion. Furthermore, over-expression of deltaC8-SNAP-23, a dominant-negative mutant of SNAP-23, did not abrogate SEAP secretion. These results suggest that SNAP-23 is not essential for constitutive exocytosis of SEAP.     

10-Å CryoEM Structure and Molecular Model of the Myriapod (Scutigera) 6 × 6mer Hemocyanin: Understanding a Giant Oxygen Transport Protein

Oxygen transport in Myriapoda is maintained by a unique 6 × 6mer hemocyanin, that is, 36 subunits arranged as six hexamers (1 × 6mers). In the sluggish diplopod Spirostreptus, the 1 × 6mers seem to operate as almost or fully independent allosteric units (h ∼ 1.3; P₅₀ ∼ 5 torr), whereas in the swift centipede Scutigera, they intensively cooperate allosterically (h ∼ 10; P₅₀ ∼ 50 torr). Here, we show the chemomechanical basis of this differential behavior as deduced from hybrid 6 × 6mer structures, obtained by single-particle cryo-electron microscopy of the Scutigera 6 × 6mer (10.0 Å resolution according to the 0.5 criterion) and docking of homology-modeled subunits from Scutigera and two diplopods, Spirostreptus and Polydesmus. The Scutigera 6 × 6mer hemocyanin is a trigonal antiprism assembled from six smaller trigonal antiprisms (1 × 6mers), thereby exhibiting D3 point group symmetry. It can be described as two staggered 3 × 6mers or three oblique 2 × 6mers. Topologically, the 6 × 6mer is subdivided into six subunit zones, thereby exhibiting a mantle (24 subunits) and a core (12 subunits). The six hexamers are linked by 21 bridges, subdivided into five types: two within each 3 × 6mer and three between both 3 × 6mers. The molecular models of the 6 × 6mer reveal intriguing amino acid appositions at these inter-hexamer interfaces. Besides opportunities for salt bridges, we found pairs of carboxylate residues for possible bridging via a Ca²⁺ or Mg²⁺ ion. Moreover, we detected histidine clusters, notably in Scutigera, allowing us to advance hypotheses as to how the hexamers are allosterically coupled in centipede hemocyanin and why they act more independently in diplopod hemocyanin.     

Molecular structure of an N-formyltransferase from Providencia alcalifaciens O30

The existence of N-formylated sugars in the O-antigens of Gram-negative bacteria has been known since the middle 1980s, but only recently have the biosynthetic pathways for their production been reported. In these pathways, glucose-1-phosphate is first activated by attachment to a dTMP moiety. This step is followed by a dehydration reaction and an amination. The last step in these pathways is catalyzed by N-formyltransferases that utilize N¹⁰-formyltetrahydrofolate as the carbon source. Here we describe the three-dimensional structure of one of these N-formyltransferases, namely VioF from Providencia alcalifaciens O30. Specifically, this enzyme catalyzes the conversion of dTDP-4-amino-4,6-dideoxyglucose (dTDP-Qui4N) to dTDP-4,6-dideoxy-4-formamido-d-glucose (dTDP-Qui4NFo). For this analysis, the structure of VioF was solved to 1.9 Å resolution in both its apoform and in complex with tetrahydrofolate and dTDP-Qui4N. The crystals used in the investigation belonged to the space group R32 and demonstrated reticular merohedral twinning. The overall catalytic core of the VioF subunit is characterized by a six stranded mixed β-sheet flanked on one side by three α-helices and on the other side by mostly random coil. This N-terminal domain is followed by an α-helix and a β-hairpin that form the subunit:subunit interface. The active site of the enzyme is shallow and solvent-exposed. Notably, the pyranosyl moiety of dTDP-Qui4N is positioned into the active site by only one hydrogen bond provided by Lys 77. Comparison of the VioF model to that of a previously determined N-formyltransferase suggests that substrate specificity is determined by interactions between the protein and the pyrophosphoryl group of the dTDP-sugar substrate.     

Development of glutathione-coupled cantilever for the single-molecule force measurement by scanning force microscopy

The accuracy and the fidelity of a single-molecule force measurement largely rely on how the molecule of interest is attached to the solid substrate surface (bead, cantilever, cover glass and etc.). A site-specific attachment of a protein without affecting its structure and enzymatic function has been a major concern. Here, we established a glutathione-coupled cantilever to which any glutathione S-transferase (GST)-fused proteins can be attached in a desired direction. The rupture force between glutathione and GST was approximately 100 pN on average. By using this cantilever, we succeeded in measuring the interaction force between importin alpha and importin beta.     

Differential role of molten globule and protein folding in distinguishing unique features of botulinum neurotoxin

Botulinum neurotoxins (BoNTs) are proteins of great interest not only because of their extreme toxicity but also paradoxically for their therapeutic applications. All the known serotypes (A-G) have varying degrees of longevity and potency inside the neuronal cell. Differential chemical modifications such as phosphorylation and ubiquitination have been suggested as possible mechanisms for their longevity, but the molecular basis of the longevity remains unclear. Since the endopeptidase domain (light chain; LC) of toxin apparently survives inside the neuronal cells for months, it is important to examine the structural features of this domain to understand its resistance to intracellular degradation. Published crystal structures (both botulinum neurotoxins and endopeptidase domain) have not provided adequate explanation for the intracellular longevity of the domain. Structural features obtained from spectroscopic analysis of LCA and LCB were similar, and a PRIME (PReImminent Molten Globule Enzyme) conformation appears to be responsible for their optimal enzymatic activity at 37 °C. LCE, on the other hand, was although optimally active at 37 °C, but its active conformation differed from the PRIME conformation of LCA and LCB. This study establishes and confirms our earlier finding that an optimally active conformation of these proteins in the form of PRIME exists for the most poisonous poison, botulinum neurotoxin. There are substantial variations in the structural and functional characteristics of these active molten globule related structures among the three BoNT endopeptidases examined. These differential conformations of LCs are important in understanding the fundamental structural features of proteins, and their possible connection to intracellular longevity could provide significant clues for devising new countermeasures and effective therapeutics.     

SNARE-mediated membrane traffic is required for focal adhesion kinase signaling and Src-regulated focal adhesion turnover

Integrin signaling is central to cell growth and differentiation, and critical for the processes of apoptosis, cell migration and wound repair. Previous research has demonstrated a requirement for SNARE-dependent membrane traffic in integrin trafficking, as well as cell adhesion and migration. The goal of the present research was to ascertain whether SNARE-dependent membrane trafficking is required specifically for integrin-mediated signaling. Membrane traffic was inhibited in Chinese hamster ovary cells by expression of dominant-negative (E329Q) N-ethylmaleimide-sensitive fusion protein (NSF) or a truncated form of the SNARE SNAP23. Integrin signaling was monitored as cells were plated on fibronectin under serum-free conditions. E329Q-NSF expression inhibited phosphorylation of focal adhesion kinase (FAK) on Tyr397 at early time points of adhesion. Phosphorylation of FAK on Tyr576, Tyr861 and Tyr925 was also impaired by expression of E329Q-NSF or truncated SNAP23, as was trafficking, localization and activation of Src and its interaction with FAK. Decreased FAK-Src interaction coincided with reduced Rac activation, decreased focal adhesion turnover, reduced Akt phosphorylation and lower phosphatidylinositol 3,4,5-trisphosphate levels in the cell periphery. Over-expression of plasma membrane-targeted Src or phosphatidylinositol 3-kinase (PI3K) rescued cell spreading and focal adhesion turnover. The results suggest that SNARE-dependent trafficking is required for integrin signaling through a FAK/Src/PI3K-dependent pathway.     

Production and characterization of bacterial polyhydroxyalkanoate copolymers and evaluation of their blends by fourier transform infrared spectroscopy and scanning electron microscopy

Rhizobium meliloti produced a copolymer of short chain length polyhydroxyalkanoate (scl-PHA) on sucrose and rice bran oil as carbon substrates. Recombinant Escherichia coli (JC7623ABC1J4), bearing PHA synthesis genes, was used to synthesize short chain length-co-medium chain length PHA (scl-co-mcl-PHA) on glucose and decanoic acid. Fourier transform infrared spectroscopy (FTIR) spectra of the PHAs indicated strong characteristic bands at 1282, 1723, and 2934 cm⁻¹ for scl-PHA and at 2933 and 2976 cm⁻¹ for scl-co-mcl-PHA polymer. Differentiation of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate-P(HB-co-HV) copolymer was obseverd using FTIR, with absorption bands at 1723 and 1281 for PHB, and at 1738, 1134, 1215 cm⁻¹ for HV-copolymer. The copolymers were analyzed by GC and ¹H NMR spectroscopy. Films of polymer blends of PHA produced by R. meliloti and recombinant E. coli were prepared using glycerol, polyethylene glycol, polyvinyl acetate, individually (1:1 ratio), to modify the mechanical properties of the films and these films were evaluated by FTIR and scanning electron microscopy.     

Cryo-electron microscopy structure of a yeast mitochondrial preprotein translocase

The translocase of the outer mitochondrial membrane (TOM) complex is the main entry gate for proteins imported into mitochondria. We determined the structure of the native, unstained ∼ 550-kDa core-Tom20 complex from Saccharomycescerevisiae by cryo-electron microscopy at 18-Å resolution. The complex is triangular, measuring 145 Å on edge, and has near-3-fold symmetry. Its bulk is made up of three globular ∼ 50-Å domains. Three elliptical pores on the c-face merge into one central ∼ 70-Å cavity with a cage-like assembly on the opposite t-face. Nitrilotriacetic acid-gold labeling indicates that three Tom22 subunits in the TOM complex are located at the perimeter of the complex near the interface of the globular domains. We assign Tom22, which controls complex assembly, to three peripheral protrusions on the c-face, while the Tom20 subunit is tentatively assigned to the central protrusion on this surface. Based on our three-dimensional map, we propose a model of transient interactions and functional dynamics of the TOM assembly.