Assessment of in vitro binding of isolated pectic domains to cellulose by adsorption isotherms, electron microscopy, and X-ray diffraction methods

Isolated pectic domains representative of the pectic backbone and the neutral sugar side chains were tested for their ability to interact with cellulose in comparison to the well-known binding of xyloglucan. Pectic side chains displayed a significant in vitro binding capacity to cellulose, whereas pectic backbone domains exhibited only slight adsorption to cellulose microfibrils. To support the binding results, electron microscopy and X-ray diffraction were applied. Celluloses from bacteria and sugar beet cell walls were used as substrates for the precipitation of isolated pectic domains or xyloglucan by acetone vapor diffusion. Pectic side chains grew attached to the cellulose surfaces, whereas pectic backbone domains were observed separately from cellulose microfibrils. Xyloglucan seeded with cellulose provoked a decrease of microfibrils entanglement, but no clear cross-links between neighboring microfibrils were observed. These results led to the elucidation of the pectic domains responsible for binding with cellulose microfibrils.     

TEMPO-mediated oxidation of native cellulose: Microscopic analysis of fibrous fractions in the oxidized products

The 2,2,6,6-tetramethylpiperidine-1-oxy radial (TEMPO)-mediated oxidation was applied to aqueous suspensions of cotton linters, ramie and spruce holocellulose at pH 10.5, and water-insoluble fractions of the TEMPO-oxidized celluloses collected by filtration with water were analyzed by optical and transmission electron microscopy and others. The results showed that both fibrous forms and microfibrillar nature of the original native celluloses were maintained after the TEMPO-mediated oxidation, even though carboxylate and aldehyde groups of 0.67–1.16 and 0.09–0.21 mmol/g, respectively, were introduced into the water-insoluble fractions. Neither crystallinity nor crystal size of cellulose I of the original native celluloses was changed under the conditions adopted in this study. Carboxylate groups in the TEMPO-oxidized ramie were mapped by labeling with lead ions as their counter ions. The transmission electron micrographs indicated that some heterogeneous distribution of carboxylate groups along each cellulose microfibril or each bundle of cellulose microfibrils seemed to be present in the TEMPO-oxidized celluloses.     

Crystallographic aspects of sub-elementary cellulose fibrils occurring in the wall of rose cells culturedin vitro

Summary Quantities of disencrusted sub-elementary cellulose fibrils from the cell wall of rose cells culturedin vitro were prepared. Following an X-ray and electron diffraction analysis, these fibrils gave a cellulose diffraction pattern which presented only two strong equatorial diffraction spacings at 0.409 and 0.572 nm indicating that the fibrils have a crystalline structure resembling that of cellulose IV_I. This observation is best explained in terms of a lateral disorganization of the cellulose chains within the fibrils. This disorganization cannot be eliminated and is connected with the small width of the fibrils which contain from 12 to 25 cellulose chains only. In these fibrils, most of the cellulose chains are superficial and not locked with neighboring chains in a tight hydrogen bond system as in thicker cellulose microfibrils.     

Single crystals of chitosan

Lamellar single crystals of chitosan were prepared at 125 degrees C by adding ammonia to a low DP fraction of chitosan dissolved in water. The crystals gave sharp electron diffraction diagrams which could be indexed in an orthorhombic P2(1)2(1)2(1) unit cell with a = 8.07 A, b = 8.44 A, c = 10.34 A. The unit cell contained two anti-parallel chitosan chains and no water molecules. It was found that cellulose microfibrils from Valonia ventricosa could act as nuclei for inducing the crystallization of chitosan on cellulose. This produced a shish-kebab morphology.     

Lattice images from ultrathin sections of cellulose microfibrils in the cell wall of Valonia macrophysa Kütz.

The crystalline ultrastructure and orientation of cellulose microfibrils in the cell wall of Valonia macrophysa were investigated by means of high-resolution electron microscopy of ultrathin (approx. 28 nm) sections. With careful selection of imaging conditions, ultrastructural aspects of the cell wall that had remained unresolved in previous studies were worked out by direct imaging of crystal lattice of cellulose microfibrils. It was confirmed that each microfibril is a single crystal having a lateral dimension of 20·20 nm², because lattice images of 0.39 nm resolution were clearly recorded with no major disruption in the whole area of the cross section of the microfibril. There was no evidence for the existence of 3.5-nm elementary fibrils which have been considered to be basic crystallographic and morphological units of cellulose in general. It was also confirmed that the axial directions (crystallographic fiber direction) of adjacent microfibrils in each single lamella of the cell wall are opposite to each other.     

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.     

Cellulose microfibrils from banana rachis: Effect of alkaline treatments on structural and morphological features

Four different alkaline treatments for isolation of cellulose microfibrils from vascular bundles of banana rachis were comparatively studied. Isolated cellulose microfibrils were characterized using high performance anion exchange chromatography for neutral sugar composition, as well as attenuated total reflection Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray and electron diffraction and solid-state ¹³C NMR. The cellulose microfibrils treated with peroxide alkaline, peroxide alkaline–hydrochloric acid or 5 wt% potassium hydroxide had average diameters of 3–5 nm, estimated lengths of several micrometers. Although the interpretation of their structure is difficult because of the low cristallinity, X-ray diffraction, ¹³C NMR and ATR-FTIR results suggested that cellulose microfibrils from banana rachis could be either interpreted as cellulose IV₁ or cellulose Iβ. The specimens treated with a more concentrated KOH solution (18 wt%) were still microfibrillated but their structure was converted to cellulose II.     

New insight into cellulose structure by atomic force microscopy shows the i(alpha) crystal phase at near-atomic resolution

The organization of the surface of cellulose is important in cell structure, as well as in industrial processing and modification. Using atomic force microscopy, we show that the I(alpha) phase of native cellulose first proposed in 1984 and subsequently characterized by a triclinic unit cell exists over large areas of the surface of microcrystals from Valonia, one of the most highly crystalline celluloses. There is startling agreement between the observed structure and crystal models, and it is possible to identify the specific crystal face being imaged. The near-atomic resolution images also offer an insight into structural reconstructions at the surface compared to the interior. We are able to assign features in the images to particular side groups attached to the glucose ring and find indications of subtle modifications of the position of surface hydroxyls due to changes in hydrogen bonding.     

Development of cellulose synthesizing complexes inBoergesenia andValonia

Summary The development of linear cellulose synthesizing complexes (=TCs) of two selected siphonocladalean algae,Boergesenia forbesii andValonia ventricosa was investigated by following the time course of the regeneration of cell walls with the freeze fracture technique after aplanospore induction. The following structural changes of TC development were examined: (1) TCs initiatede novo; (2) the first nucleation of TC subunits occurs within 2 hr inBoergesenia and 5 hr inValonia after aplanospore induction, immediately followed by the assembly of cellulose microfibrils; (3) TCs increase their length during the assembly of randomly oriented microfibrils; and, (4) TCs stop increasing in length after the assembly of ordered microfibrils begins, with some time lag. The data demonstrate that linear TCs are not artificial products but dynamic entities which are involved in the assembly of cellulose microfibrils.     

The Stability of Cellulose: A Statistical Perspective from a Coarse-Grained Model of Hydrogen-Bond Networks

A critical roadblock to the production of biofuels from lignocellulosic biomass is the efficient degradation of crystalline microfibrils of cellulose to glucose. A microscopic understanding of how different physical conditions affect the overall stability of the crystalline structure of microfibrils could facilitate the design of more effective protocols for their degradation. One of the essential physical interactions that stabilizes microfibrils is a network of hydrogen (H) bonds: both intrachain H-bonds between neighboring monomers of a single cellulose polymer chain and interchain H-bonds between adjacent chains. We construct a statistical mechanical model of cellulose assembly at the resolution of explicit hydrogen-bond networks. Using the transfer matrix method, the partition function and the subsequent statistical properties are evaluated. With the help of this lattice-based model, we capture the plasticity of the H-bond network in cellulose due to frustration and redundancy in the placement of H-bonds. This plasticity is responsible for the stability of cellulose over a wide range of temperatures. Stable intrachain and interchain H-bonds are identified as a function of temperature that could possibly be manipulated toward rational destruction of crystalline cellulose.     

Electron microscopy study of the enzymic hydrolysis of Valonia cellulose

The enzymic degradation of cellulose from Valonia macrophysa was observed by electron microscopy and evaluated by electron diffraction. Two types of Valonia samples were subjected to digestion; firstly, intact fragments cut from cell wall material and, secondly, cellulose microcrystals resulting from the acid hydrolysis of entire vesicles. These two substrates, when subjected to the action of crude cellulase complexes either from Trichoderma reesei or Schizophyllum commune were readily degraded. During the degradation, each microfibril or microcrystal became fibrillated into longitudinal crystalline sub-elements having widths ranging from below 2 nm to the full size of the initial Valonia microfibrillar width. These observations are evaluated in term of current theories concerning the topological action of cellulases.     

Activation of crystalline cellulose to cellulose III(I) results in efficient hydrolysis by cellobiohydrolase

The crystalline polymorphic form of cellulose (cellulose I(alpha)-rich) of the green alga, Cladophora, was converted into cellulose III(I) and I(beta) by supercritical ammonium and hydrothermal treatments, respectively, and the hydrolytic rate and the adsorption of Trichoderma viride cellobiohydrolase I (Cel7A) on these products were evaluated by a novel analysis based on the surface density of the enzyme. Cellobiose production from cellulose III(I) was more than 5 times higher than that from cellulose I. However, the amount of enzyme adsorbed on cellulose III(I) was less than twice that on cellulose I, and the specific activity of the adsorbed enzyme for cellulose III(I) was more than 3 times higher than that for cellulose I. When cellulose III(I) was converted into cellulose I(beta) by hydrothermal treatment, cellobiose production was dramatically decreased, although no significant change was observed in enzyme adsorption. This clearly indicates that the enhanced hydrolysis of cellulose III(I) is related to the structure of the crystalline polymorph. Thus, supercritical ammonium treatment activates crystalline cellulose for hydrolysis by cellobiohydrolase.     

Organization of pectic arabinan and galactan side chains in association with cellulose microfibrils in primary cell walls and related models envisaged

The structure of arabinan and galactan domains in association with cellulose microfibrils was investigated using enzymatic and alkali degradation procedures. Sugar beet and potato cell wall residues (called 'natural' composites), rich in pectic neutral sugar side chains and cellulose, as well as 'artificial' composites, created by in vitro adsorption of arabinan and galactan side chains onto primary cell wall cellulose, were studied. These composites were sequentially treated with enzymes specific for pectic side chains and hot alkali. The degradation approach used showed that most of the arabinan and galactan side chains are in strong interaction with cellulose and are not hydrolysed by pectic side chain-degrading enzymes. It seems unlikely that isolated arabinan and galactan chains are able to tether adjacent microfibrils. However, cellulose microfibrils may be tethered by different pectic side chains belonging to the same pectic macromolecule.     

Cellulose-synthesizing terminal complexes and microfibril structure in the brown alga Sphacelaria rigidula (Sphacelariales,Phaeophyceae)*

The brown alga Sphacelaria rigidula Kützing synthesizes cellulose microfibrils as determined by CBH I-gold labeling. The cellulose microfibrils are thin, ribbon-like structures with a uniform thickness of about 2.6 nm and a variable width in the range of 2.6-30 nm. Some striations appear along the longitudinal axis of the microfibrils. The developed cell wall in Sphacelaria is composed of three to four layers, and cellulose micro-fibrils are deposited in the third layer from the outside of the wall. A freeze fracture investigation of this alga revealed cellulose-synthesizing terminal complexes (TCs), which are associated with the tip of microfibril impressions in the plasmatic fracture face of the plasma membrane. The TCs consist of subunits arranged in a single linear row. The average diameter of the sub-units is about 6 nm, and the intervals between the neighboring subunits, about 9 nm, are relatively constant. The number of subunits constituting the TC varies between 10 and 100, so that the length of the whole TC varies widely. A model that has been proposed for the assembly of thin, ribbon-like microfibrils was applied to microfibril assembly in Sphacelaria.     

Mechanism of cellobiose inhibition in cellulose hydrolysis by cellobiohydrolase

An experimental study of cellobiose inhibition in cellulose hydrolysis by synergism of cellobiohydrolyse I and endoglucanase I is presented. Cellobiose is the structural unit of cellulose molecules and also the main product in enzymatic hydrolysis of cellulose. It has been identified that cellobiose can strongly inhibit hydrolysis reaction of cellulase, whereas it has no effect on the adsorption of cellulase on cellulose surface. The experimental data of FT-IR spectra, fluorescence spectrum and circular dichroism suggested that cellobiose can be combined with trypto-phan residue located near the active site of cellobiohydrolase and then form steric hindrance, which prevents cellulose molecule chains from diffusing into active site of cellulase. In addition, the molecular conformation of cellobiohydrolase changes after cellobiose binding, which also causes most of the non-productive adsorption. Under these conditions, microfibrils cannot be separated from cellulose chains, thus further hydrolysis of cell     

Mechanism of cellobiose inhibition in cellulose hydrolysis by cellobiohydrolase

An experimental study of cellobiose inhibition in cellulose hydrolysis by synergism of cellobiohydrolyse I and endoglucanase I is presented. Cellobiose is the structural unit of cellulose molecules and also the main product in enzymatic hydrolysis of cellulose. It has been identified that cellobiose can strongly inhibit hydrolysis reaction of cellulase, whereas it has no effect on the adsorption of cellulase on cellulose surface. The experimental data of FT-IR spectra, fluorescence spectrum and circular dichroism suggested that cellobiose can be combined with tryptophan residue located near the active site of cellobiohydrolase and then form steric hindrance, which prevents cellulose molecule chains from diffusing into active site of cellulase. In addition, the molecular conformation of cellobiohydrolase changes after cellobiose binding, which also causes most of the non-productive adsorption. Under these conditions, microfibrils cannot be separated from cellulose chains, thus further hydrolysis of cellulose can hardly proceed.     

Polymorphism of cellulose I family: reinvestigation of cellulose IVI

Polymorphs of cellulose I, III(I), and IV(I) have been investigated by X-ray diffraction, FT-IR, and solid-state (13)C NMR spectroscopy. Highly crystalline cellulose III(I) samples were prepared by treating cellulose samples in supercritical ammonia at 140 degrees C for 1 h, and conventional cellulose III(I) samples were prepared by liquid ammonia treatment. The cellulose IV(I) sample of highest crystallinity was that prepared from Cladophora cellulose III(I) in supercritical ammonia, followed by the sample treated in glycerol at 260 degrees C for 0.5 h, whereas the lowest crystallinity was observed in ramie cellulose prepared by conventional liquid ammonia treatment followed by glycerol annealing. In general, the perfection of cellulose IV(I) depends on the crystallinity of the original material: either of the starting cellulose I or of the cellulose III(I) after ammonia treatment. The product thus obtained was analogous to cellulose I(beta), which is what it should be called rather than cellulose IV(I). If the existence of the polymorph cellulose IV(I) is not accepted, the observations on which it has been based may be explained by the fact that the structure termed cellulose IV(I) is cellulose I(beta) which contains lateral disorder.     

Periodic disorder along ramie cellulose microfibrils

Small angle neutron scattering studies have been carried out on cellulose fibers from ramie and Populus maximowicii (cotton wood). Labile hydrogen atoms were replaced by deuterium atoms, in water-accessible disordered regions of the fibers, to increase the neutron scattering contrast between the disordered and crystalline regions. A meridional Bragg reflection, corresponding to a longitudinal periodicity of 150 nm, was observed when scattering collected from hydrogenated and deuterated dry ramie fibers was subtracted. No Bragg reflection was observed with the cotton wood fibers, probably because of lower orientation of the microfibrils in the cell wall. The ramie fibers were then subjected to electron microscopy, acid hydrolysis, gel permeation chromatography, and viscosity studies. The leveling off degree of polymerization (LODP) of the hydrolyzed samples matched exactly the periodicity observed in the diffraction studies. The weight loss related to the LODP was only about 1.5%, and thus, the microfibrils can be considered to have 4-5 disordered residues every 300 residues.     

Interconversion of multiple forms of tyrosine aminotransferase in vitro and in vivo in cultured hepatoma cells.

Corticosteroid-induced tyrosine aminotransferase (EC 2.6.1.5) from cultured hepatoma cells was separated by carboxymethyl-Sephadex chromatography into three molecular forms resembling those described previously in the rat liver. Enzyme forms were isolated and used as purified substrates to examine their in vitro interconversion by various subcellular fractions. Isolated form III was converted to forms II and I, and isolated form II was converted to form I by the coarse particulate fraction sedimenting at 1000 X g. This activity was inhibited by the serine enzyme inhibitor phenylmethane sulfonyl fluoride or by raising the pH to 8.7. Conversion of enzyme forms in vitro in the opposite direction (I leads to II leads to III) could not be detected. The distribution of enzyme forms in vivo was examined by the use of experimental conditions that prevent their in vitro interconversion during cell extraction. Tyrosine aminotransferase extracted from cell subjected to various treatments that affect the rates of enzyme synthesis or degradation existed always predominantly as form III. It appears, therefore, that multiple forms of tyrosine aminotransferase are not related to the turnover of this enzyme in vivo.     

Crystallization behavior of glucomannan

Five different glucomannan samples were recrystallized from dilute solution. Depending on the experimental conditions, the crystals obtained could be identified as corresponding to the mannan I (anhydrous precipitate of more or less regular lozenge-shaped crystals) or mannan II (hydrated gel-forming pseudo-fibrillar precipitate). High-molecular-weight material, low temperature of crystallization, or a polar crystallization medium favored the mannan II polymorph, whereas a low-molecular weight, a high temperature of crystallization, and a crystallization medium of low polarity yielded the mannan I polymorph. Since the base-plane unit-cell dimensions are fairly constant with respect to variation of glucose, it is likely that isomorphous replacement of mannose by glucose occurs in glucomannan crystallization; the data also indicate that perfection of the glucomannan crystals was reduced in specimens having a high glucose:mannose ratio. The oriented crystallization of glucomannan on cellulose microfibrils was also studied under conditions where the mannan I polymorph was obtained. This gave shish-kebab structures that were characterized.