Influence of cultivation conditions on xylose-to-xylitol bioconversion by a new isolate of Debaryomyces hansenii

About 270 yeast isolates were screened for xylitol production using xylose as the sole carbon source. The best isolate, Debaryomyces hansenii UFV-170, released 5.84 g L(-1) xylitol from 10 g L(-1) xylose after 24 h, corresponding to a yield of xylitol on consumed substrate (Y(P/S)) of 0.54 g g(-1). This strain was cultivated batch-wise at variable starting concentrations of xylose (S(o)) and biomass (X(o)) and agitation intensity, in order to improve xylitol production and to evaluate, through simple carbon balances, the influence of these conditions on xylose metabolism. Under the best microaerobic conditions (S(o) = 53 g L(-1), X(o) = 1.4 g L(-1), 200 rpm), xylitol production reached 37.0 g L(-1), corresponding to xylitol volumetric productivity of 1.0 g L(-1)h(-1), specific productivity of 0.22 g g(-1)h(-1) and Y(P/S) = 0.76 g g(-1). Almost 83% of xylose was consumed for xylitol production, the rest being consumed for growth, while respiration was negligible. The new isolate appeared to be a promising alternative for industrial xylitol bioproduction.     

The behavior of key enzymes of xylose metabolism on the xylitol production by <Emphasis Type="Italic">Candida guilliermondii</Emphasis> grown in hemicellulosic hydrolysate

A variety of raw materials have been used in fermentation process. This study shows the use of rice straw hemicellulosic hydrolysate, as the only source of nutrient, to produce high added-value products. In the present work, the activity of the enzymes xylose reductase (XR); xylitol dehydrogenase (XD); and glucose-6-phosphate dehydrogenase (G6PD) during cultivation of Candida guilliermondii on rice straw hemicellulosic hydrolysate was measured and correlated with xylitol production under different pH values (around 4.5 and 7.5) and initial xylose concentration (around 30 and 70 g l(-1)). Independent of the pH value and xylose concentration evaluated, the title of XD remained constant. On the other hand, the volumetric activity of G6PD increased whereas the level of XR decreased when the initial xylose concentration was increased from 30 to 70 g l(-1). The highest values of xylitol productivity (Q (P) approximately 0.40 g l(-1)) and yield factor (Y (P/S) approximately 0.60 g g(-1)) were reached at highest G6PD/XR ratio and lowest XR/XD ratio. These results suggest that NADPH concentrations influence the formation of xylitol more than the activity ratios of the enzymes XR and XD. Thus, an optimal rate between G6PD and XR must be reached in order to optimize the xylitol production.     

Influence of temperature and pH on xylitol production from xylose by Debaryomyces hansenii

The production of xylitol from concentrated synthetic xylose solutions (S(o) = 130-135 g/L) by Debaryomyces hansenii was investigated at different pH and temperature values. At optimum starting pH (pH(o) = 5.5), T = 24 degrees C, and relatively low starting biomass levels (0.5-0.6 g(x)/L), 88% of xylose was utilized for xylitol production, the rest being preferentially fermented to ethanol (10%). Under these conditions, nearly 70% of initial carbon was recovered as xylitol, corresponding to final xylitol concentration of 91.9 g(P)/L, product yield on substrate of 0.81 g(P)/g(S), and maximum volumetric and specific productivities of 1.86 g(P)/L x h and 1.43 g(P)/g(x) x h, respectively. At higher and lower pH(o) values, respiration also became important, consuming up to 32% of xylose, while negligible amounts were utilized for cell growth (0.8-1.8%). The same approach extended to the effect of temperature on the metabolism of this yeast at pH(o) = 5.5 and higher biomass levels (1.4-3.0 g(x)/L) revealed that, at temperatures ranging from 32-37 degrees C, xylose was nearly completely consumed to produce xylitol, reaching a maximum volumetric productivity of 4.67 g(P)/L x h at 35 degrees C. Similarly, both respiration and ethanol fermentation became significant either at higher or at lower temperatures. Finally, to elucidate the kinetic mechanisms of both xylitol production and thermal inactivation of the system, the related thermodynamic parameters were estimated from the experimental data with the Arrhenius model: activation enthalpy and entropy were 57.7 kJ/mol and -0.152 kJ/mol x K for xylitol production and 187.3 kJ/mol and 0.054 kJ/mol x K for thermal inactivation, respectively.     

Xylitol production from sugarcane bagasse hydrolyzate in fluidized bed reactor. Effect of air flowrate

Cells of Candida guilliermondii immobilized onto porous glass spheres were cultured batchwise in a fluidized bed bioreactor for xylitol production from sugarcane bagasse hemicellulose hydrolyzate. An aeration rate of only 25 mL/min ensured minimum yields of xylose consumption (0.60) and biomass production (0.14 g(DM)/g(Xyl)), as well as maximum xylitol yield (0.54 g(Xyt)/g(Xyl)) and ratio of immobilized to total cells (0.83). These results suggest that cell metabolism, although slow because of oxygen limitation, was mainly addressed to xylitol production. A progressive increase in the aeration rate up to 140 mL/min accelerated both xylose consumption (from 0.36 to 0.78 g(Xyl)/L.h) and xylitol formation (from 0.19 to 0.28 g(Xyt)/L.h) but caused the fraction of immobilized to total cells and the xylitol yield to decrease up to 0.22 and 0.36 g(Xyt)/g(Xyl), respectively. The highest xylitol concentration (17.0 g(Xyt)/L) was obtained at 70 mL/min, but the specific xylitol productivity and the xylitol yield were 43% and 22% lower than the corresponding values obtained at the lowest air flowrate, respectively. The concentrations of consumed substrates and formed products were used in material balances to evaluate the xylose fractions consumed by C. guilliermondii for xylitol production, complete oxidation through the hexose monophosphate shunt, and cell growth. The experimental data collected at variable oxygen level allowed estimating a P/O ratio of 1.35 mol(ATP)/mol(O) and overall ATP requirements for biomass growth and maintenance of 3.4 mol(ATP)/C-mol(DM).     

Xylitol production from high xylose concentration: evaluation of the fermentation in bioreactor under different stirring rates

AIMS: To investigate the production of xylitol by the yeast Candida guilliermondii FTI 20037, in a bioreactor, from rice straw hemicellulosic hydrolysate with a high xylose concentration. METHODS AND RESULTS: Batch fermentation was carried out with rice straw hemicellulosic hydrolysate containing about 85 g xylose l(-1), in a stirred-tank bioreactor at 30 degrees C, under aeration of 1.3 vvm (volume of air per volume of medium per min) and different stirring rates (200, 300 and 500 rev min(-1)). The bioconversion of xylose into xylitol by the yeast depended on the stirring rate, the maximum xylitol yield (YP/S = 0.84 g g(-1)) being achieved at 300 rev min-1, with no need to pretreat the hydrolysate for purification. CONCLUSIONS: To determine the most adequate oxygen transfer rate is fundamental to improving the xylose-to-xylitol bioconversion by C. guilliermondii. SIGNIFICANCE AND IMPACT OF THE STUDY: For the microbial production of xylitol to be economically viable, the initial concentration of xylose in the lignocellulosic hydrolysate should be as high as possible, as with high substrate concentrations it is possible to increase the final product concentration. Nevertheless, there are few reports on the use of high xylose concentrations. Considering a process in bioreactor, from rice straw hemicellulosic hydrolysate, this is an innovator work.     

Effect of phosphate buffer concentration on the batch xylitol production by Candida guilliermondii

AIMS: To evaluate the effect of phosphate buffer concentration on growth and xylitol production by Candida guilliermondii FTI 20037. METHODS AND RESULTS: Fermentations runs were carried out in batch mode employing semisynthetic medium supplemented with phosphate buffer at different concentrations (from 200 to 600 mmol l(-1)). The xylitol yield (Y(P/S)) and volumetric productivity (Q(P)) were improved when the fermentation medium was supplemented with phosphate buffer at concentration of 600 mmol l(-1). Under this condition (Y(P/S)) and (Q(P)) values were 0.75 g g(-1) and 0.66 g l(-1) h(-1), respectively, whereas in the absence of the phosphate buffer these values decreased to 0.52 g g(-1) and 0.44 g l(-1)h(-1) respectively. CONCLUSIONS: The use of phosphate buffer at 600 mmol l(-1) promoted an easier pH control during shake flasks fermentation of C. guilliermondii. In addition the xylitol yield and productivity were significantly improved in response to the supplementation of potassium phosphate in the medium. The increase in these parameters could be related to both osmotic effect and pH control. SIGNIFICANCE AND IMPACT OF THE STUDY: This approach provided a method for improving the xylitol production from semisynthetic medium by C. guilliermondii, being possible their use as a simple strategy to achieve efficient fermentation processes employing complex medium such as lignocellulosic hydrolysates.     

Coupling two sizes of CSTR-type bioreactors for sequential lactic acid and xylitol production from hemicellulosic hydrolysates of vineshoot trimmings

This study develops a system for the efficient valorisation of hemicellulosic hydrolysates of vineshoot trimmings. By connecting two reactors of 2L and 10L, operational conditions were set up for the sequential production of lactic acid and xylitol in continuous fermentation, considering the dependence of the main metabolites and fermentation parameters on the dilution rate. In the first bioreactor, Lactobacillus rhamnosus consumed all the glucose to produce lactic acid at 31.5°C, with 150rpm and 1L of working volume as the optimal conditions. The residual sugars were employed for the xylose to xylitol bioconversion by Debaryomyces hansenii in the second bioreactor at 30°C, 250rpm and an air-flow rate of 2Lmin(-1). Several steady states were reached at flow rates (F) in the range of 0.54-5.33mLmin(-1), leading to dilution rates (D) ranging from 0.032 to 0.320h(-1) in Bioreactor 1 and from 0.006 to 0.064h(-1) in Bioreactor 2. The maximum volumetric lactic acid productivity (Q(P LA)=2.908gL(-1)h(-1)) was achieved under D=0.266h(-1) (F=4.44mLmin(-1)); meanwhile, the maximum production of xylitol (5.1gL(-1)), volumetric xylitol productivity (Q(P xylitol)=0.218gL(-1)h(-1)), volumetric rate of xylose consumption (Q(S xylose)=0.398gL(-1)h(-1)) and product yield (0.55gg(-1)) were achieved at an intermediate dilution rate of 0.043h(-1) (F=3.55mLmin(-1)). Under these conditions, ethanol, which was the main by-product of the fermentation, was produced in higher amounts (1.9gL(-1)). Finally, lactic acid and xylitol were effectively recovered by conventional procedures.     

Influence of the metabolism pathway on lactic acid production from hemicellulosic trimming vine shoots hydrolyzates using Lactobacillus pentosus

Hemicellulosic hydrolyzates from trimming wastes of vine shoots were proposed as a carbon source for lactic acid production by Lactobacillus pentosus CECT-4023T (ATCC-8041). These hydrolyzates are composed mainly of glucose (12.0 g/L), xylose (17.5 g/L) and arabinose (4.3 g/L). Acetic acid, the main subproduct, started to be produced after all of the glucose was completely depleted, showing that the acetic acid coproduction came only from the xylose and arabinose consumption. In the absence of glucose, the L. pentosus pathway shifts from homo to heterofermentative. Thus, L. pentosus can be considered a facultative heterofermentative organism, degrading hexoses (glucose) via the Embden-Meyerhoff-Parnas pathway and pentoses (xylose and arabinose) via the phosphoketolase pathway. Hydrolyzates were vacuum evaporated to increase the initial sugars concentration up to 35.4 g/L of glucose, 52.3 g/L of xylose, and 13.0 g/L of arabinose. Under these conditions the lactic acid concentration reached 46.0 g/L (Q(P) = 0.933 g/L.h, Y(P/S) = 0.78 g/g; Y(P/S) theoretical = 91.7%) and a clear product inhibition was observed. Additional experiments with synthetic sugars, in the absence of inhibitory compounds, indicate that this inhibition must be attributed to the metabolic pathway but not to the inhibitory compounds present in the fermentation broth.     

Effects of sulfuric acid loading and residence time on the composition of sugarcane bagasse hydrolysate and its use as a source of xylose for xylitol bioproduction

A 2(2) full factorial design was employed to evaluate the effects of sulfuric acid loading and residence time on the composition of sugarcane bagasse hydrolysate obtained in a 250-L reactor. The acid loading and the residence time were varied from 70 to 130 mg acid per gram of dry bagasse and from 10 to 30 min, respectively, while the temperature (121 degrees C) and the bagasse loading (10%) were kept constant. Both the sulfuric acid loading and the residence time influenced the concentrations of xylose and inhibitors in the hydrolysate. The highest xylose concentration (22.71 g/L) was achieved when using an acid loading of 130 mg/g and a residence time of 30 min. These conditions also led to increased concentrations of inhibiting byproducts in the hydrolysate. All of the hydrolysates were vacuum-concentrated to increase the xylose concentration, detoxified by pH alteration and adsorption into activated charcoal, and used for xylitol bioproduction in a stirred tank reactor. Neither the least (70 mg/g, 10 min) nor the most severe (130 mg/g, 30 min) hydrolysis conditions led to the best xylitol production (37.5 g/L), productivity (0.85 g/L h), and yield (0.78 g/g).     

Carbon material and bioenergetic balances of xylitol production from corncobs by Debaryomyces hansenii

The effect of oxygenation on xylitol production by the yeast Debaryomyces hansenii has been investigated in this work using the liquors from corncob hydrolysis as the fermentation medium. The concentrations of consumed substrates (glucose, xylose, arabinose, acetate and oxygen) and formed products (xylitol, arabitol, ethanol, biomass and carbon dioxide) have been used, together with those previously obtained varying the hydrolysis technique, the level of adaptation of the microorganism, the sterilization procedure and the initial substrate and biomass concentrations, in carbon material balances to evaluate the percentages of xylose consumed by the yeast for the reduction to xylitol, alcohol fermentation, respiration and cell growth. The highest xylitol concentration (71 g/L) and volumetric productivity (1.5 g/L.h) were obtained semiaerobically using detoxified hydrolyzate produced by autohydrolysis-posthydrolysis, at starting levels of xylose (S(0)) and biomass (X(0)) of about 100 g/L and 12 g(DM)/L, respectively. No less than 80% xylose was addressed to xylitol production under these conditions. The experimental data collected in this work at variable oxygen levels allowed estimating a P/O ratio of 1.16 mol(ATP)/mol(O). The overall ATP requirements for biomass production and maintenance demonstrated to remarkably increase with X(0) and for S(0) >or= 130 g/L and to reach minimum values (1.9-2.1 mol(ATP)/C-mol(DM)) just under semiaerobic conditions favoring xylitol accumulation.     

酵母发酵蔗渣半纤维素水解物生产木糖酶

采用二次正交旋转组合设计研究了蔗渣半纤维素水解过程中硫酸浓度与液 固比对木糖收率的影响。回归分析表明 ,这两个因素与木糖的收率之间存在显著的回归关系。通过回归方程优化水解条件 ,当硫酸浓度 2 .4g L ,液 固 =6 .2 ,在蒸汽压力 2 .5× 10 4Pa的条件下水解 2 .5h ,10 0g蔗渣可水解生成木糖约 2 4g。大孔树脂吸附层析处理蔗渣半纤维素水解物 ,能有效地减少其中的酵母生长抑制物含量 ,显著改善水解物的发酵性能。用大孔树脂在pH 2条件下处理过的蔗渣半纤维素水解物作基质 ,含木糖 2 0 0g L ,产木糖醇酵母菌株CandidatropicalisAS2 .1776发酵 110h耗完基质中的木糖 ,生成木糖醇 12 7g L ,产物转化率 0 .6 4(木糖醇g 木糖g) ,产物生成速率 1.15g L·h .     

Xylitol formation by Candida guilliermondii grown in a cane bagasse hemicellulosic hydrolysate: Effect of aeration and inoculum adaptation

The xylose conversion into by Candida guilliermondii was evaluated in sugar cane bagasse hemicellulosic hydrolysate. The effect of air flow rates of 0.4, 0.6 and 0.8 vvm cn xylitol formation was studied. In addition, inoculum previously adapted to the hydrolysate was also tested in the fermentation carried out at 0.6 vvm. The results showed that xylitol production depends markedly on the aeration rate and on the previous adaptation of the yeast to the hydrolysate. When the highest productivity of xylitol was 0.39 g/l × h. However, during the fermentation carried out at an air flow rate of 0.6 vvm with adapted inoculum, the productivity increased to 0.65 g/l × h. Furthermore, the adapted cells performed quite well in the presencel of acetic concentrations of about 4.5 g/l in the medium.     

Formation of xylitol in Candida guilliermondii 2581 culture

The yeast strain Candida guilliermondii 2581 was chosen for its ability to produce xylitol in media with high concentrations of xylose. The rate of xylitol production at a xylose concentration of 150 g/l is 1.25 g/l per h; the concentration of xylitol after three days of cultivation is 90 g/l; and the relative xylitol yield is 0.6 g per g substrate consumed. The growth conditions were found that resulted in the maximum relative xylitol yield with complete consumption of the sugar: xylose concentration, 150 g/l; pH 6.0; and shaking at 60 rpm. It was shown that the growth under conditions of limited aeration favors the reduction of xylose.     

Xylitol Production by a Culture ofCandida guilliermondii2581

The yeast strain Candida guilliermondii2581 was chosen for its ability to produce xylitol in media with high concentrations of xylose. The rate of xylitol production at a xylose concentration of 150 g/l is 1.25 g/l per h; the concentration of xylitol after three days of cultivation is 90 g/l; and the relative xylitol yield is 0.6 g per g substrate consumed. The growth conditions were found that resulted in the maximum relative xylitol yield with complete consumption of the sugar: xylose concentration, 150 g/l; pH 6.0; and shaking at 60 rpm. It was shown that the growth under conditions of limited aeration favors the reduction of xylose.     

Kinetic study and modelling of the xylitol production using Candida parapsilosis in oxygen-limited culture conditions

Kinetic studies are presented for xylitol production and growth of the yeast Candida parapsilosis ATCC 28474. The oxygen supply influence on xylitol production from xylose was investigated. No metabolic activity was detected in anaerobic conditions. In contrast, it was found that under low aeration rates (0.1-0.2 vvm), xylitol is produced. Xylitol production decreases when air flow to reactor is augmented. An unstructured model is proposed for the kinetic behaviour analysis of yeast growing in batch culture. A simplex method was used for the estimation of model parameters. The parameter confidence intervals were also calculated.     

The reduction of xylose to xylitol by Candida guilliermondii and Candida parapsilosis: Incidence of oxygen and pH

Summary The ability of C. guilliermondii and C. parapsilosis to ferment xylose to xylitol was evaluated under different oxygen transfer rates in order to enhance the xylitol yield. In C. guilliermondii, a maximal xylitol yield of 0.66 g/g was obtained when oxygen transfer rate was 2.2 mmol/l.h. Optimal conditions to produce xylitol by C. parapsilosis (0.75 g/g) arose from cultures at pH 4.75 with 0.4 mmoles of oxygen/l.h. The response of the yeasts to anaerobic conditions has shown that oxygen was required for xylose metabolism.Nomenclature max maximum specific growth rate (per hour) - qSmax maximum specific rate of xylose consumption (g xylose per g dry biomass per hour) - qpmax maximum specific productivity of xylitol (g xylitol per g dry biomass per hour) - Qp average volumetric productivity of xylitol (g xylitol per liter per hour) - Y_P/S xylitol yield (g xylitol per g substrate utilized) - Y_P'/S glycerol yield (g glycerol per g substrate utilized) - Y_X/S biomass yield (g dry biomass per g substrate utilized)     

Effects of environmental conditions on production of xylitol byCandida boidinii

Candida boidinii NRRL Y-17213 produced more xylitol thanC. magnolia (NRRL Y-4226 and NRRL Y-7621),Debaryomyces hansenii (C-98 M-21, C-56 M-9 and NRRL Y-7425), orPichia (Hansenula) anomala (NRRL Y-366). WithC. boidinii, highest xylitol productivity was at pH 7 but highest yield was at pH 8, using 5 g urea and 5 g Casamino acids/I. Decreasing the aeration rate decreased xylose consumption and cell growth but increased the xylitol yield. When an initial cell density of 5.1 g/l was used instead of 1.3 g/l, xylitol yield and the specific xylitol production rate doubled. Substrate concentration had the greatest effect on xylitol production; increasing xylose concentration 7.5-fold (to 150 g/l) gave a 71-fold increase in xylitol production (53 g/l) and a 10-fold increase in xylitol/ethanol ratio. The highest xylitol yield (0.47 g/g), corresponding to 52% of the theoretical yield, was obtained with 150 g xylose/l after 14 days. Xylose at 200 g/l inhibited xylitol production.E. Vandeska and S. Kuzmanova were and S. Amartey and T. Jeffries are with the Forest Products Laboratory, Institute for Microbial and Biochemical Technology, 1 Gifford Pinchot Drive, Madison, WI 53703, USA. E. Vandeska and S. Kuzmanova are now with the Faculty of Technology and Metallurgy, Rudjer Boskovic 16, 91000 Skopje, Macedonia     

The influence of aeration and hemicellulosic sugars on xylitol production by Candida tropicalis

The influence of other hemicellulosic sugars (arabinose, galactose, mannose and glucose), oxygen limitation, and initial xylose concentration on the fermentation of xylose to xylitol was investigated using experimental design methodology. Oxygen limitation and initial xylose concentration had considerable influences on xylitol production by Canadida tropicalis ATCC 96745. Under semiaerobic conditions, the maximum xylitol yield was 0.62 g/g substrate, while under aerobic conditions, the maximum volumetric productivity was 0.90 g/l h. In the presence of glucose, xylose utilization was strongly repressed and sequential sugar utilization was observed. Ethanol produced from the glucose caused 50% reduction in xylitol yield when its concentration exceeded 30 g/l. When complex synthetic hemicellulosic sugars were fermented, glucose was initially consumed followed by a simultaneous uptake of the other sugars. The maximum xylitol yield (0.84 g/g) and volumetric productivity (0.49 g/l h) were obtained for substrates containing high arabinose and low glucose and mannose contents.     

Effect of nutrient supplementation of crude or detoxified concentrated distilled grape marc hemicellulosic hydrolysates on the xylitol production by Debaryomyces hansenii

Biosynthesis of xylitol using the yeast Debaryomyces hansenii NRRL Y-7426 was carried out using distilled grape marc (DGM) hemicellulosic hydrolysates directly concentrated by vacuum evaporation or after detoxification with activated charcoal. The effect of nutrient supplementation with vinasses, corn steep liquor (CSL) or commercial nutrients was explored. Using crude concentrated hemicellulosic hydrolysates, the maximum xylitol concentration, 11.3?g/L, was achieved after 172?hr (Q ( xylitol )?=?0.066?g/L-hr; Y ( xylitol ) (/SC)?=?0.21?g/g); meanwhile, using detoxified concentrated hydrolysates, the concentration increased up to 19.7?g/L after 72?hr (Q ( xylitol )?=?0.274?g/L-hr; Y ( xylitol ) (/SC)?=?0.38?g/g). On the other hand, using crude or detoxified hydrolysates, the xylose-to-xylitol bioconversion was strongly affected by the addition of nutrients, suggesting that these hydrolysates present essential nutrients favouring the growth of D. hansenii.     

Metabolic behavior of immobilized Candida guilliermondii cells during batch xylitol production from sugarcane bagasse acid hydrolyzate

Candida guilliermondii cells, immobilized in Ca-alginate beads, were used for batch xylitol production from concentrated sugarcane bagasse hydrolyzate. Maximum xylitol concentration (20.6 g/L), volumetric productivity (0.43 g/L. h), and yield (0.47 g/g) obtained after 48 h of fermentation were higher than similar immobilized-cell systems but lower than free-cell cultivation systems. Substrates, products, and biomass concentrations were used in material balances to study the ways in which the different carbon sources were utilized by the yeast cells under microaerobic conditions. The fraction of xylose consumed to produce xylitol reached a maximum value (0.70) after glucose and oxygen depletion while alternative metabolic routes were favored by sub-optimal conditions.