Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Lanthanide iodides as promoters of acetonitrile amination. Molecular structure of MeC(NH)NHPr, MeC(NH)NHBu and {Dy[MeC(NH)NEt2]6}I3

Amination of acetonitrile by the amines MeNH₂, PrⁿNH₂, PrⁱNH₂, Bu^tNH₂, and Et₂NH is efficiently promoted by the lanthanide iodides LnI₂ (Ln = Nd, Dy, Tm), LnI₃ (Ln = Pr, Nd, Dy) and LnI₃(THF)₃ (Ln = Pr, Nd, Dy). The formed mono- and N,N′-disubstituted amidines MeC(NH)NHR (R = Prⁱ, Bu^t), MeC(NH)NEt₂, MeC(NR)NHR (R = Me, Prⁿ) were isolated mainly as the complexes with starting iodide of general composition LnI₂(amidine)_x (1) or LnI₃(amidine)_x (2) (x = 3-8). In the products 1, which evidently are the mixtures of LnI²⁺, and LnI₃ derivatives, the metal exists in trivalent state but one of the ligands actually is amidinate anion. A part of the generated amidines remains in the reaction solutions in free form. Heating of the 1 and 2 in vacuum at 150-200 °C affords corresponding amidine and the complexes with reduced amount of the amidine ligands LnI₂(amidine)_y (3) or LnI₃(amidine)_y (4) (y = 2-3). The products 3 and 4 displayed the same catalytic activity in the acetonitrile-amine cross-coupling as the initial iodides. SmI₂ and especially YbI₂ revealed lower activity. The structure of isopropylacetamidine (5), tert-butylacetamidine (6) and {Dy[MeC(NH)NEt₂]₆}I₃(MeCN) (7) were determined by X-ray diffraction analysis.     

Halo-complexes of titanium(III): The thermochromic behaviour of [NBu4][TiCl4(THF)2]

TiCl₃(thf)₃ reacts with ACl (A = NBu₄, PPN; PPN = Ph₃PNPPh₃) in dichloromethane solution, affording the compounds A[TiCl₄(thf)₂] (A = NBu₄, 1; A = PPN, 2). Compound 1, dissolved in CH₂Cl₂, exhibits thermochromic behaviour which has been the subject of variable-temperature UV-Vis investigations.     

Novel long bipyridine-type linking ligands containing an intervening naphthalene fragment: [Zn(L)(NO3)2], [Zn(L)(NO3)2], and [Cd(L)1.5(NO3)2] (L = (4-py)-CHN-C10H6-NCH-(4-py); L = (3-py)-CHN-C10H6-NCH-(3-py))

Novel bipyridine-type linking ligands L¹ ((4-py)-CHN-C₁₀H₆-NCH-(4-py)) and L² ((3-py)-CHN-C₁₀H₆-NCH-(3-py)), a pair of isomers due to possessing different pairs of terminal pyridyl groups, were prepared by the Schiff-base condensation. In ligand L¹, the N?N separation between the terminal pyridyl groups is 16.0 Å, with their nitrogen donor atoms at the para positions (4,4′). The corresponding N?N separation in ligand L² is 14.2 Å, with the nitrogen donor atoms at the meta positions (3,3′). 1-D zigzag-chain coordination polymers [Zn(L¹)(NO₃)₂] (1) and [Zn(L²)(NO₃)₂] (2) were prepared by reactions of Zn(NO₃)₂ · 6H₂O with ligands L¹ and L², respectively, by solution diffusion. Polymer 3, [Cd(L¹)_1.5(NO₃)₂], prepared from Cd(NO₃)₂ · 4H₂O and L¹, exhibits a 1-D ladder structure, whose repeating ladder unit consists of four Cd metals and four L¹ ligands to create a large 76-membered ring with dimensions of 20.8 × 20.8 Å. All products were structurally characterized by X-ray diffraction.     

Mononuclear and dinuclear iridium and heterodinuclear iridium-rhodium complexes derived from 1,4-C6H4(CCSiMe3)2 as precursor

The labile iridium(I) precursor trans-[IrCl(C₈H₁₄)(PiPr₃)₂] (2), prepared in situ from [IrCl(C₈H₁₄)₂]₂ (1) and PiPr₃, reacted with equimolar amounts of 1,4-C₆H₄(CCSiMe₃)₂ (3) at 60 °C to give the mononuclear vinylidene complex trans-[IrCl(CC(SiMe₃)C₆H₄CCSiMe₃)(PiPr₃)₂] (4). From 2 and 3 in the molar ratio of 2:1, the dinuclear compound trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)IrCl(PiPr₃)₂] (5) was obtained. Reaction of 4 with [RhCl(PiPr₃)₂]₂ (6) at room temperature afforded the heterodinuclear alkyne(vinylidene) complex trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄CCSiMe₃)RhCl(PiPr₃)₂] (7), which on heating at 45 °C was converted to the bis(vinylidene) isomer trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)RhCl(PiPr₃)₂] (8).     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Benzylamidine complexes of platinum(II) derived by nucleophilic addition of primary and secondary amines. X-ray crystal structure of trans-[PtCl2{Z-N(H)C(NHMe)CH2Ph}2]

The reaction of cis- and trans-[PtCl₂(NCCH₂Ph)₂] with a 5-fold excess of MeNH₂ and Me₂NH in CH₂Cl₂ at −10 °C affords in high yield the bis-amidine derivatives cis- and trans-[PtCl₂{Z-N(H)C(NHMe)CH₂Ph}₂] (1a, 2a) and cis- and trans-[PtCl₂{E-N(H)C(NMe₂)CH₂Ph}₂] (3a, 4a), respectively. The complexes were characterized by means of elemental analysis, multinuclear NMR and FT-IR techniques. The X-ray diffraction analysis was carried out for trans-[PtCl₂{Z-N(H)C(NHMe)CH₂Ph}₂] (2a).Moreover, the in vitro cytotoxicity for the new derivatives was evaluated in a wide panel of human tumor cell lines.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

Reactions of [Os3(CO)10(MeCN)2] with ethynyl thiophenes: The formation of linked clusters

The reaction of 2 equiv. of [Os₃(CO)₁₀(MeCN)₂] with R-CC-L-CC-R (R = H, L = (C₄H₂S); R = SiMe₃, L = (C₄H₂S-C₄H₂S), (C₄H₂S-C₄H₂S-C₄H₂S), (C₄H₂S)-(C₁₄H₈)-(C₄H₂S)) affords the series of linked clusters [{Os₃(CO)₁₀}(HCC(C₄H₂S)CCH){Os₃(CO)₁₀}] (1), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (2), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (4) and [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S)-(C₁₄H₈)-(C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (6) as the major products. The complexes have been characterised by a range of spectroscopic methods and, in the case of 1 and 2 by single crystal X-ray crystallography. The alkyne groups cap the osmium triangles in the expected μ₃-η²-||-bonding mode and each triangle is coordinated by nine terminal and one μ₂-carbonyl group. Solution UV-Vis spectra of the complexes were similar to those observed for the free ligands consistent with there being little delocalisation between the cluster units and the thiophene groups.     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

Synthesis and structural diversity of 2-pyridylmethylideneamine complexes of zinc(II) chloride

The addition reactions of zinc(II) chloride to N-substituted pyridine-2-carbaldimines [Py-CHNR, R = Me (1a), Ph (1b), Bz (1c), allyl (1d)] lead to different complexes dependent on the N-bound substituent R. The 1:1 complexes show molecular structures of the type [(Py-CHNR)ZnCl₂] for R = methyl (2a), phenyl (2b), and allyl (2d) with a distorted tetrahedral environment for the zinc atom. The zinc complex with the N-methylated pyridine-2-carbaldimine also forms a dimer of the type [(Py-CHNR)ZnCl₂]₂ (2a)₂ with a square pyramidal coordination sphere of zinc. A 3:2 stoichiometry is observed for R = benzyl and an ion pair of the type [Zn(Py-CHNR)₃]²⁺ [ZnCl₄]²⁻ (2c) is found in the solid state.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Synthesis and solid-state structures of (triphos)iridacyclopentadiene complexes as models for vinylidene intermediates in the [2 + 2 + 1] cyclotrimerization of alkynes

The iridium 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) complexes [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(NCMe)]BF₄ (2-NCMe, R = CO₂Me) and [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(CO)]BF₄ (2-CO, R = CO₂Me) serve as models for proposed iridium-vinylidene intermediates of relevance to the [2 + 2 + 1] cyclotrimerization of alkynes. The solid-state structures of 2-NCMe, 2-CO, and [κ²(C¹,C⁴)-CRCRCRCR]{CH₃C(CH₂PPh₂)₃}Ir(Cl) (2-Cl), were determined by X-ray crystallography.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Cyclodiphosph(III)azane chemistry - Ylides from the reaction of [(RNH)P-N(t-Bu)]2 [R = t-Bu, i-Pr] with dimethyl maleate and chiral ansa-type derivatives from reaction of [ClP-N(t-Bu)]2 with a substituted BINOL

Use of a simple inorganic ring system with the cyclodiphosph(III)azane skeleton [e.g. [(RNH)P-N(t-Bu)]₂ [R = t-Bu (7), i-Pr (8)] to probe some of the intermediates proposed in phosphine mediated organic reactions is highlighted. Thus the reaction of 7-8 with the allenylphosphine oxide Ph₂P(O)C(Ph)CCH₂ (9) affords the phosphinimines [(RNH)P(μ-N-t-Bu)₂P(N-R)-C(CH₂)CH(Ph)-P(O)Ph₂] [R = t-Bu (10), i-Pr (11)], while a similar reaction of 7-8 with dimethyl maleate (or dimethyl fumarate) affords the ylides [(RNH)P(μ-N-t-Bu)₂P(NH-R)C(CO₂Me)-CH₂(CO₂Me) [R = t-Bu (18), i-Pr (19)]. The implication of such reactions on phosphine mediated organic transformations including Morita-Baylis-Hillman reaction is mentioned. In a rather rare type of situation, an unusually long phosphoryl (PO) bond [1.538 (5) Å] as revealed the X-ray structure of {(R)-6,6′-(t-Bu)₂-1,1′-(C₁₀H₅)₂-2,2′-O₂-}{P(O)(N-t-Bu)₂-P(Se)} (27) is rationalized by means of crystallographic disorder in packing after comparing the data with that in the literature and {1,1′-(C₁₀H₆)₂-2,2′-O₂}{P(Se)(N-t-Bu)₂-P(Se)} (29). X-ray structures of the new compounds 10-11, 18-19, 27 and 29 are discussed. Compound 10 crystallizes in the chiral space group Pca2(1) with (S)-chirality at the carbon center [-C(CH₂)CH(Ph)-P] suggesting a case of spontaneous resolution through crystallization.     

Ketimine synthesis in the coordination sphere of thallium (I)

[AuTl(C₆F₅)₂(en)] (en = ethylenediamine) reacts with cyclic ketones as cyclopentanone (Cy⁵O), cyclohexanone (Cy⁶O) or cycloheptanone (Cy⁷O) in 1:1 or 1:2 molar ratio leading to products of stoichiometry [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NH₂}] (x = 5 1, 6 2 or 7 3), or [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NCy^x}] (x = 5 4, 6 5 or 7 6). Addition of ethylenediamine to the ketimine complexes in chloroform regenerates [AuTl(C₆F₅)₂(en)], the starting material, and the free ketimines, as their NMR and mass spectra evidenced. The ketimine complexes display luminescence in solid state at room temperature and at 77 K at higher wavelengths than the diamine starting product (505 nm). The excited states responsible for this behaviour are assigned to orbitals due to the gold-thallium interactions.     

A closer look at the phosphorus-phosphorus double bond lengths in meta-terphenyl substituted diphosphenes

The single crystal X-ray structure of DmpPPDmp (1, Dmp = 2,6-Mes₂C₆H₃), which was previously reported to have a relatively short PP bond distance of 1.985(2) Å at room temperature, has been reexamined at variable temperatures. Crystallographic analyses of 1 at 100 K allow for resolution of disorder of the two phosphorus atoms (which is unresolvable from room temperature diffraction data), and for determination of a more conventional PP bond length of 2.029(1) Å. Single crystals of the closely related diphosphene DxpPPDxp (2, Dxp = 2,6-(2,6-Me₂C₆H₃)₂C₆H₃) show similar disorder in one of two crystallographically independent molecules in the unit cell. A value of 2.0276(4) Å is found for the non-disordered PP bonds at 100 K for 2. A new diphosphene Ar′PPAr′ (3, Ar′ = 2,6-Mes₂-4-OMe-C₆H₃) has been prepared and its structure has also been examined. The PP bond length for 3 was determined to be 2.0326(9) Å and relatively free of the effects of disorder.