Oxime-functionalized diazamesocyclic derivates and their metal complexes: Effect of the ligand backbones and anions on the generation of novel monomeric and mono-μ-Cl dimeric Cu complexes

Two oxime-functionalized diazamesocyclic derivates, namely, N,N′-bis(acetophenoneoxime)-1,4-diazacycloheptane (H₂L¹) and N,N′-bis(acetophenonoxime)-1,5-diazacyclooctane (H₂L²), have been prepared and characterized. Both ligands (obtained in the hydrochloride form) can form stable metal complexes with Cu^II and Ni^II salts, the crystal structures of which were determined by X-ray diffraction technique. The reactions of H₂L¹ with Cu(ClO₄)₂ and Ni(ClO₄)₂ afford a penta-coordinated mononuclear complex [Cu(H₂L¹)Cl] · ClO₄ (1) and a four-coordinated monomeric [Ni(HL¹)] · ClO₄ (2), in which the ligand is monodeprotonated. The ligand H₂L² also forms a quite similar mononuclear [Ni(HL²)] · ClO₄ complex with Ni(ClO₄)₂, according to our previous work. However, reactions of different Cu^II salts [Cu(ClO₄)₂, CuCl₂ and Cu(NO₃)₂ for 3, and CuSO₄ for 4] with H₂L² in the presence of NaClO₄ yield two unusual mono-μ-Cl dinuclear Cu^II complexes [Cu₂(HL²)₂Cl] · (ClO₄) (3), and [Cu₂(H₂L²)(HL²)Cl] · (ClO₄)₂ · (H₂O)(4). These results indicate that the resultant Cu^II complexes (1, 3 and 4) are sensitive to the backbones of diazamesocycles and even auxiliary anions.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Complexes of Cu with mixed-donor phenanthroline-containing macrocycles: analysis of their structural, redox and spectral properties in the context of Type-1 blue copper proteins biomimetic models

The macrocycles L¹-L³ having N₂S₂O-, N₂S₂-, and N₂S₃-donor sets, respectively, and incorporating the 1,10-phenanthroline unit interact in EtOH and MeCN solutions with Cu^II to give 1:1 [M(L)]²⁺ complex species. The compounds [Cu(L¹)(ClO₄)]ClO₄ (1), [Cu(L²)(ClO₄)]ClO₄ ·  (2) and [Cu(L³)](ClO₄)₂ (3) were isolated at the solid state and the first two also characterised by X-ray diffraction studies. The conformation adopted by L¹ and L² in the cation complexes reveals the aliphatic portion of the rings folded over the plane containing the heteroaromatic moiety with the ligands encapsulating the metal centre within their cavity by imposing, respectively, a square-based pyramidal and a square planar geometry. In both complexes, the metal ion completes its coordination sphere by interacting with a ClO₄⁻ ligand. The compound [Cu(L³)₂](PF₆)₂ (4) containing a 1:2 cation complex was also isolated at the solid state: EPR spectroscopy measurements suggest the presence of a CuN₄ chromophore in this complex. The EPR and electronic spectral features of 1-4 have been studied and their redox properties examined in comparison with those observed for Type-1 blue copper proteins.The reactivity of L¹-L³ has also been tested toward stoichiometric amounts of the Cu^I salt [CuCl(PPh₃)₃].     

Polynuclear nickel (II) and copper (II) complexes of hexaazamacrocycles incorporating pairs of diethylenetriamine subunits separated by aromatic spacers

A series of Ni(II) and Cu(II) complexes of the hexaaza macrocycles, 3,6,9,17,20,23-hexaazatricyclo[23.3.1.1^11,15]triaconta-1(29),11(30),12,14,25,27-hexaene (L¹) and 3,6,9,16,19,22-hexaazatricyclo[22.2.2.2^11,14]triaconta-1(26),11(29),12,14(30),24(28),25-hexaene (L²), have been prepared and the crystal structures determined for [Ni₂L¹(O₂CCH₃)₂(H₂O)₂](ClO₄)₂ (1), [Ni₂L²(DMF)₆](ClO₄)₄ · 2H₂O (2), {[Cu₂L²Br(O₂CCH₃)](ClO₄)₂}_n (3), [Cu₂L²(μ-CO₃)(H₂O)₂]₂(ClO₄)₄ · 8H₂O (4), [Cu₂L²(O₂CCH₃)₂](BF₄)₂ (5), and [Cu₂L¹(μ-imidazolate)Br]₂Br₄ · 6H₂O (6). In these complexes, two metal centers are bound per ligand; in 1 and 3-6, the N₃ subunits of L¹ or L² coordinate meridionally to the metal centers, whilst in 2, each N₃ subunit in L² adopts a facial mode of coordination. The binuclear cations in 1 and 2 have chair-like conformations, with the distorted octahedral Ni(II) coordination spheres completed by terminal water and a bidentate acetate ligand in 1 and three DMF ligands in 2. The Cu(II) centers in 3-6 generally reside in square planar environments, although a weakly binding ligand enters the coordination sphere in some cases, generating a distorted square pyramidal geometry. The binuclear [Cu₂L²]⁴⁺ units in 3, 4 and 5 adopt similar bowl-shaped conformations, stabilized by H-bonding interactions between pairs of amine groups from L² and a perchlorate or tetrafluoroborate anion. In 3, the binuclear units are linked through acetate groups, bridging in a syn-anti fashion, to produce a zig-zag polymeric chain structure, whilst 4 incorporates a tetrameric cation consisting of two binuclear units linked via a pair of carbonate bridges. Compound 6 features an imidazolate bridge between the two Cu(II) centers bound by L¹. Pairs of [Cu₂L¹(μ-imidazolate)]³⁺ units are then weakly linked through a pair of bromide anions.     

Assembly of luminescent Ag(I) coordination architectures adjusted by modification of pyrimidine-based thioether ligands

Two new structurally related pyrimidine-based thioether ligands, angular ditopic ligand 1,3-bis(2-pyrimidinylthiomethyl)benzene (L²) and linear ditopic ligand 1,4-bis(2-pyrimidinylthiomethyl)benzene (L³), have been designed and prepared. Reaction of two shaped-specific ligands with different silver(I) salts affords three novel luminescent coordination architectures: discrete metallomacrocycle [Ag₄(L²)₂(NO₃)₄] · 2MeOH (3), 1D chain {[Ag₂L³(NO₃)₂] · 2CCl₃}_n (4) and 2D wire netlike structure {[AgL³(DMF)]ClO₄ · 0.25H₂O}_n (5). The results show that the nature of organic ligands, geometric requirement of metal atoms and counter anions have great influence on the structures of metal-organic frameworks.     

Coordination chemistry of heterocycle-functionalized diazamesocycles: tuning the productive Ni complexes through altering the pendants of ligands

In order to further understand the coordination chemistry of diazamesocyclic systems, a series of mononuclear Ni^II complexes with 1,4-diazacycloheptane (DACH) functionalized by additional imidazole or pyridine donor pendants, including [NiL¹](ClO₄)₂ · H₂O (1), [NiL¹Cl](ClO₄) (2), [NiL²Cl](ClO₄) · CH₃OH (3), [NiL²Cl][NiL²](ClO₄)₃ (4) and [NiL³](ClO₄)₂ (5), where L¹ = 1,4-bis(N-1-methylimidazol-2-yl-methyl)-1,4-diazacycloheptane, L² = 1,4-bis(pyridyl-2-yl-methyl)-1,4-diazacycloheptane, and L³ = 1,4-bis-(imidazol-4-yl-methyl)-1,4-diazacycloheptane, have been prepared and characterized. A detailed study on the solid structures and solution spectra of these complexes indicates that tetradentate ligands L¹, L² and L³ would lead to new Ni^II complexes with different coordination environments in the solid states and solution. The N-methyl substituted imidazole functionalized ligand L¹ forms green compound 2 and yellow product 1; while the pyridine functionalized ligand L² affords red product 4 and green complex 3; the ligand L³ results in only one stable mononuclear Ni^II product 5. The solution behaviors of these interesting compounds were also investigated by UV-Vis technique.     

Synthesis of two configurational isomers of a 14-membered tetraaza macrocycle bearing N-CH2CH2CONH2 pendent arms and their copper(II) complexes: Crystal structures of the complexes

Two isomers of 1,8-bis(N-carbamoylethyl)-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (L²) bearing two N-CH₂CH₂CONH₂ groups, C-meso-L² and C-racemic-L², have been prepared and characterized. Each isomer reacts with Cu(II) ion to form a five-coordinate complex, [Cu(C-meso-L²)](ClO₄)₂ (1) or [Cu(C-racemic-L²)](ClO₄)₂ (2), in which only one pendent amide group is coordinated to the metal ion. The crystal structure of 1 · CH₃CN shows that the complex possesses trans-III-type N-configuration and has a slightly distorted square-pyramidal coordination geometry with a relatively long axial Cu-O (N-CH₂CH₂CONH₂) bond (2.207(3) Å). On the other hand, 2 exhibits trans-V configuration and has a slightly distorted trigonal bipyramidal coordination geometry with a very short equatorial Cu-O (N-CH₂CH₂CONH₂) bond (2.007(3) Å); the Cu-O distance is distinctly shorter than the Cu-N distances (2.062(4)-2.090(4) Å). The complex 1 exhibits a d-d transition band at approximately 565 nm, whereas the band for 2 is observed at approximately 770 nm.     

Nickel(II) complexes of terdentate or symmetrical tetradentate Schiff bases: Evidence of the influence of the counter anions in the hydrolysis of the imine bond in Schiff base complexes

Two sets of ligands, set-1 and set-2, have been prepared by mixing 1,3-diaminopentane and carbonyl compounds (2-acetylpyridine or pyridine-2-carboxaldehyde) in 1:1 and 1:2 ratios, respectively, and employed for the synthesis of complexes with Ni(II) perchlorate, Ni(II) thiocyanate and Ni(II) chloride. Ni(II) perchlorate yields the complexes having general formula [NiL₂](ClO₄)₂(L = L¹ [N³-(1-pyridin-2-yl-ethylidene)-pentane-1,3-diamine] for complex 1 or L²[N³-pyridin-2-ylmethylene-pentane-1,3-diamine] for complex 2) in which the Schiff bases are monocondensed terdentate, whereas Ni(II) thiocyanate results in the formation of tetradentate Schiff base complexes, [NiL(SCN)₂] (L = L³[N,N′-bis-(1-pyridin-2-yl-ethylidine)-pentane-1,3-diamine] for complex 3 or L⁴ [N,N′-bis(pyridin-2-ylmethyline)-pentane-1,3-diamine] for complex 4) irrespective of the sets of ligands used. Complexes 5 {[NiL³(N₃)₂]} and 6 {[NiL⁴(N₃)₂]} are prepared by adding sodium azide to the methanol solution of complexes 1 and 2. Addition of Ni(II) chloride to the set-1 or set-2 ligands produces [Ni(pn)₂]Cl₂, 7, as the major product, where pn = 1,3-diaminopentane. Formation of the complexes has been explained by the activation of the imine bond by the counter anion and thereby favouring the hydrolysis of the Schiff base. All the complexes have been characterized by elemental analyses and spectral data. Single crystal X-ray diffraction studies confirm the structures of three representative members, 1, 4 and 7; all of them have distorted octahedral geometry around Ni(II). The bis-complex of terdentate ligands, 1, is the mer isomer, and complexes 4 and 7 possess trans geometry.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Imidazole derivatives of binuclear copper (II) and nickel (II) complexes incorporating bis(1,4,7-triazacyclononan-1-yl) ligands

A series of new binuclear copper (II) and nickel (II) complexes of the macrocyclic ligands bis(1,4,7-triazacyclononan-1-yl)butane (L^but) and bis(1,4,7-triazacyclononan-1-yl)-m-xylene (L^mx) have been synthesized: [Cu₂L^butBr₄] (1), [Cu₂L^but(imidazole)₂Br₂](ClO₄)₂ (2), [Cu₂L^mx(μ-OH)(imidazole)₂](ClO₄)₃ (3), [Cu₂L^but(imidazole)₄](ClO₄)₄ · H₂O (4), [Cu₂L^mx(imidazole)₄](ClO₄)₄ (5), [Ni₂ L^but(H₂O)₆](ClO₄)₄ · 2H₂O (6), [Ni₂L^but(imidazole)₆](ClO₄)₄ · 2H₂O (7) and [Ni₂L^mx (imidazole)₄(H₂O)₂](ClO₄)₄ · 3H₂O (8). Complexes 1, 2, 7 and 8 have been characterized by single crystal X-ray studies. In each of the complexes, the two tridentate 1,4,7-triazacyclononane rings of the ligand facially coordinate to separate metal centres. The distorted square-pyramidal coordination sphere of the copper (II) centres is completed by bromide anions in the case of 1 and/or monodentate imidazole ligands in complexes 2, 4 and 5. Complex 3 has been formulated as a monohydroxo-bridged complex featuring two terminal imidazole ligands. Complexes 6-8 feature distorted octahedral nickel (II) centres with water and/or monodentate imidazole ligands occupying the remaining coordination sites. Within the crystal structures, the ligands adopt trans conformations, with the two metal binding compartments widely separated, perhaps as a consequence of electrostatic repulsion between the cationic metal centres. The imidazole-bearing complexes may be viewed as simple models for the coordinative interaction of the binuclear complexes of bis (tacn) ligands with protein molecules bearing multiple surface-exposed histidine residues.     

Structure, magnetic properties and nuclease activity of pyridine-2-carbaldehyde thiosemicarbazonecopper(II) complexes

New complexes of formulae [Cu(HL²)(H₂O)(NO₃)](NO₃) (1), [{Cu(L¹)(tfa)}₂] (2), [{Cu(L¹)}₂(pz)](ClO₄)₂ (3) and {[{Cu(L¹)}₂(dca)](ClO₄)}_n (4), where HL¹ = pyridine-2-carbaldehyde thiosemicarbazone, HL² = pyridine-2-carbaldehyde 4N-methylthiosemicarbazone, Htfa = trifluoroacetic acid (CF₃COOH), pz = pyrazine (C₄H₄N₂) and dca = dicyanamide [N(CN)₂]⁻, have been synthesized and characterized. The crystal structures of these compounds are built up of monomers (1), dinuclear entities with the metal centers bridged through the non-thiosemicarbazone coligand (2 and 3) and 1D chains of dimers (4). In all the cases, square-pyramidal copper(II) ions are present, except for the square-planar ones in 3. Magnetic measurements show antiferromagnetic couplings in 2, 3 and 4. The susceptibility data were fitted by the Bleaney-Bowers’ equation for copper(II) dimers derived from H = -2JS₁S₂ being the obtained J/k values −4.8, −4.3 and −5.1 K for compounds 2-4, respectively. The magnetic susceptibility of the already known [{Cu(HL¹)(tfa)}₂](tfa)₂ compound has been also measured for the first time. The J/k value is -0.3 K, lower than that in 2. The nuclease activity of 3 and 4 has been analyzed.     

Chemistry at the apical position of square-pyramidal copper(II) complexes: Synthesis, crystal structures, and magnetic properties of homopolynuclear complexes with azido bridges containing [Cu(AA)(BB)] moieties (AA = acetylacetonate; BB = 1,10-phenanthroline, bipy = 2,2′-bipyridine)

Three new homopolynuclear complexes with azido bridges have been obtained by using [Cu(AA)(BB)]⁺ building-blocks (AA = acetylacetonate; BB = 1,10-phenanthroline or 2,2′-bipyridine). The reaction between [Cu(acac)(phen)(H₂O)](ClO₄) and NaN₃ leads to a mixture of two compounds: a binuclear complex, [{Cu(acac)(phen)}₂(μ_1,3-N₃)](ClO₄) · 2H₂O (1), and a linear tetranuclear one, [{Cu(acac)(phen)(ClO₄)}₂{Cu(phen)(μ_1,1-N₃)₂}₂] (2). The reaction between [Cu(acac)(bipy)(H₂O)](ClO₄) and NaN₃ affords also a mixture of two compounds: [{Cu(acac)(bipy)}₂(μ_1,3-N₃)]₃(ClO₄)₃ · 3.75H₂O (3) and [Cu(acac)(bipy)(N₃)][Cu(acac)(bipy)(H₂O)](ClO₄) (4). The X-ray crystal structures of compounds 1-4 have been solved (for compound 4 the crystal structure was previously reported). In compounds 1 and 3, two {Cu(AA)(BB)} fragments are bridged by the azido anion in an end-to-end fashion. Two isomers, cis and trans with respect to azido bridge, were found in crystal 3. The structure of compound 2 consists of two Cu(II) central cations bridged by two μ_1,1-azido ligands, each of them being also connected to a {Cu(acac)(phen)} fragment through another μ_1,1-azido ligand. The cryomagnetic properties of the compounds 1 and 2 have been investigated and discussed. The magnetic behaviour of compound 1 shows the absence of any interactions between the metallic ions. In the tetranuclear complex 2, the magnetic interactions between the external and central copper(II) ions(J₁), and between the central metallic ions (J₂) were found ferromagnetic (J₁ = 0.36 cm⁻¹, J₂ = 7.20 cm⁻¹).     

The key role of hydrogen bonding in the nuclearity of three copper(II) complexes with hydrazone-derived ligands and nitrogen donor heterocycles

Three new Cu(II) complexes of formula [Cu(L¹)(pyz)(CH₃OH)]ClO₄ (1), [Cu(L¹)(4,4′-bpy)(ClO₄)]·0.5H₂O (2) and [{Cu(L²)(ClO₄)}₂(μ-4,4′-bpy)] (3) have been synthesised by using pyrazine (pyz) and 4,4′-bipyridine (4,4′-bpy) and tridentate O,N,O-donor hydrazone ligands, L¹H and L²H, obtained by the condensation of 1,1,1-trifluoro-2,4-pentanedione with salicyloylhydrazide and benzhydrazide, respectively. The ligands and their complexes have been characterized by elemental analyses, FT-IR, and UV-Vis spectroscopies. Single crystal X-ray structure analysis evidences the metal ion in a slightly deformed square pyramidal geometry in all the complexes. However complexes 1 and 2 are mononuclear with pyz and 4,4′-bpy, respectively, showing an unusual monodentate behavior, while complex 3 is dinuclear with 4,4′-bpy adopting the typical bridging coordination mode. Self assembly of the complex units by hydrogen bonding interactions produces one-dimensional arrangement in each crystal packing. The magnetic characterization of complex 3 indicates a weak antiferromagnetic exchange interaction between the Cu(II) ions (J = −0.96 cm⁻¹) mediated through the long 4,4′-bpy bridge. Electrochemical behavior of the complexes is also discussed.     

A series of metal-organic frameworks constructed with 2,2′-bipyridine-3,3′-dicarboxylate: Syntheses, structures, and physical properties

To determine the influence of metal ion and the auxiliary ligand on the formation of metal-organic frameworks, six new coordination polymers, {[Mn₂(bpdc)(bpy)₃(H₂O)₂] · 2ClO₄ · H₂O}_n (1), {[Mn(bpdc)(dpe)] · CH₃OH · 2H₂O}_n (2), {[Cu(bpdc)(H₂O)₂]}_n (3), {[Zn(bpdc)(H₂O)₂]}_n (4), {[Cd(bpdc)(H₂O)₃] · 2H₂O}_n (5), and {[Co(bpdc)(H₂O)₃] · 0.5dpe · H₂O}_n (6) (H₂bpdc = 2,2′-bipyridine-3,3′-dicarboxylic acid, bpy = 2,2′-bipyridine, dpe = 1,2-di(4-pyridyl) ethylene), have been synthesized and characterized. Compound 1 forms 1D helical chain structure containing two unique Mn^II ions. In 2, the bridging ligand dpe links Mn-bpdc double zigzag chains to generate a layer possesses rectangular cavities. In 3, bpdc²⁻ ligand connects to three metal centers forming a 2D network. Different from the above compounds, 4 displays a 1D double-wavelike chain. Compound 5 features a helical chain. Compound 6 also displays a helical chain with guest molecule dpe existing in the structure. These diverse structures illustrate rational adjustment of metal ions and the second ligand is a good method for the further design of helical compounds with novel structures and properties. In addition, the magnetic properties of 2, 3 and 6, the thermal stabilities and photoluminescence properties of 4 and 5 were also studied.     

Tuning the formation of copper(I) coordination architectures with quinoxaline-based N,S-donor ligands by varying terminal groups of ligands and reaction temperature

Five new complexes [Cu₂(L¹)I₂]_∞ (1), [Cu(L²)I]₂ (2), {[Cu₂(L²)I₂](CH₃CN)₃}_∞ (3), [Cu₂(L³)I₂]_∞ (4) and {[Cu(L³)I](CH₃CN)}₂ (5) have been obtained by reacting three structurally related ligands, 2,3-bis(n-propylthiomethyl)quinoxaline (L¹), 2,3-bis(tert-butylthiomethyl)quinoxaline (L²) and 2,3-bis[(o-aminophenyl)thiomethyl]quinoxaline (L³) with CuI, respectively, at different temperatures. Single crystal X-ray analyses show that 1, 3, 4 possess 1D chain structures, while 2 and 5 are discrete dinuclear molecules. It is interesting that the reactions of CuI with L¹ at room temperature and 0 °C, respectively, only afforded same structure of 1 (1a and 1b), while using L² (or L³) instead, two different frameworks 2 and 3 (or 4 and 5) have been obtained. The structural changes mainly resulted from the different conformations that L² or L³ adopted at different temperatures. Our research indicates that terminal groups of ligands take an essential role in the framework formation, and the reaction temperature also has important effect on the construction of such Cu(I) coordination architectures. Furthermore, the influence of hydrogen bonds on the conformation of ligands and the supramolecular structures of these complexes have also been explored. The luminescence properties of complexes 1, 2, and 4 have been studied in solid state at room temperature.     

Copper(I) complexes with Schiff base and 1,2-bis(diphenylphosphino)ethane as ligands: Synthesis, structure and catalytic properties for the amination of aryl halide

Some copper(I) complexes of the type [Cu(L)(dppe)]X (1-4) [where L = (3-trifluoromethylphenyl)pyridine-2-ylmethylene-amine; dppe = 1,2-bis(diphenylphosphino)ethane; X = Cl⁻, CN⁻, ClO₄⁻ and BF₄⁻] have been synthesized by the condensation of 3-aminobenzotrifluoride with 2-pyridinecarboxaldehyde followed by the reaction with CuCl, CuCN, [Cu(MeCN)₄]ClO₄ and [Cu(MeCN)₄]BF₄ in presence of dppe. The complexes 1-4 were then characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in complex the central copper(I) ion assumes the irregular pseudo-tetrahedral geometry. The catalytic activity of the complexes was tested and it was found that all the complexes worked as effective catalyst in the amination of aryl halide.     

Copper(II) nitrato and chloro complexes with sterically hindered tridentate ligands: Influence of ligand framework and charge on their structure and physicochemical properties

Copper(II) coordination complexes of the neutral ligand, tris(3-tert-butyl-5-methyl-1-pyrazolyl)methane (L2′), i.e. the copper(II) nitrato complexes [Cu(L2′)(NO₃)][Cu(NO₃)₄]_1/2 (1) and [Cu(L2′)(NO₃)](ClO₄) (2) and the copper(II) chloro complex [Cu(L2′)(Cl)](ClO₄) (3), and its anionic borate analogue, hydrotris(3-tert-butyl-5-methyl-1-pyrazolyl)borate (L2⁻), i.e. the copper(II) nitrato complex [Cu(L2)(NO₃)] (4) and the copper(II) chloro complex [Cu(L2)(Cl)] (5), were synthesized in order to investigate the influence of ligand framework and charge on their structure and physicochemical properties. While X-ray crystallography did not show any definitive trends in terms of copper(II) atom geometry in four-coordinate copper(II) chloro complexes 3 and 5, different structural trends were observed in five-coordinate copper(II) nitrato complexes 1, 2, and 4. These complexes were also characterized by spectroscopic techniques, namely, UV-Vis, ESR, IR/far-IR, and X-ray absorption spectroscopy.     

Metal-regulated assemblies of Cu, Ni, and Zn complexes with isoquinoline-3-carboxylate displaying diverse supramolecular networks

Three distinct coordination complexes, viz. {[Cu(μ-L)₂] · (H₂O)₄}_n (1), [Ni(L)₂(CH₃OH)₂] (2), and [Zn(L)₂(H₂O)₂] · (H₂O)₂ (3), have been prepared by the reactions of metal nitrates with isoquinoline-3-carboxylic acid (HL). X-ray single-crystal diffraction suggests that 1 is a 1D chain coordination polymer in which the Cu^II ions are connected by carboxylates, whereas complexes 2 and 3 represent discrete mononuclear species. In all the cases, the coordination entities are further organized via hydrogen-bonding interactions to generate multifarious supramolecular networks. Remarkably, a well-resolved 1D water morphology is observed for the first time in the crystalline lattice of 1 along [1 0 0], which consists of edge-sharing tetrameric subunits and stabilized by the metal-organic host surroundings.     

Synthesis and single crystal structures of first examples of tridentate ligands of (Te, N, S) type and their complexes with palladium(II), platinum(II) and ruthenium(II)

The First examples of (Te, N, S) type ligands, 2-CH₃SC₆H₄CHNCH₂CH₂TeC₆H₄-4-OCH₃ (L¹) and 2- CH₃SC₆H₄CHNHCH₂CH₂TeC₆H₄-4-OCH₃ (L²), and their metal complexes, [PdCl(L¹)]PF₆ · CHCl₃ · 0.5H₂O (4), [PtCl(L¹)]PF₆ (5), [PdCl(L²)]ClO₄.CHCl₃ (6), [PtCl(L²)]ClO₄ (7), and [Ru(p-cymene)(L²)](PF₆)₂ · CHCl₃ (8), have been synthesized and characterized. The single crystal structures of 4, 6 and 8 have revealed that both the ligands coordinate in them in a tridentate (Te, N, S) mode. The geometry around Pd in both the complexes has been found to be square planar, whereas for Ru in a half sandwich complex 8, it is found to be octahedral. Between two molecules of 4 there are intra and inter molecular weak Te?Cl [3.334(3) and 3.500(3) Å, respectively] interactions along with weak intermolecular Pd?Te [3.621(2) Å] interactions. The Pd-Te bond lengths are between 2.517(6) and 2.541(25) Å and the Ru-Te bond length is 2.630(6) Å. The crystal structure of [PdCl₂(4-MeO-C₆H₄- TeCH₂CH₂NH₂)] (9) is also determined. It is formed when KPF₆ is not added in the synthesis of 4 and Pd-complex of L¹ is recrystallized. Apart from Te?Cl secondary interactions, C-H?π interactions also exist in the crystal of 9.     

Dicyanamido-metal(II) complexes. Part 4: Synthesis, structure and magnetic characterization of polynuclear Cu(II) and Ni(II) complexes bridged by μ-1,5-dicyanamide

The one pot aqueous reaction of M(ClO₄)₂ (M = Cu²⁺ or Ni²⁺) with N-methylbis[2-(2-pyridylethyl)]amine (MeDEPA) and N,N′-dimethyl-N,N′-bis(2-pyridylmethyl)ethylenediamine (bpmen) and 1,4,7,10-tetraazacyclododecane (cyclen) in presence of sodium dicyanamide (Nadca) yielded dicyanamido-bridged polynuclear complex {[Cu(MeDEPA)(μ-1,5-dca)]ClO₄}_n (1), and two dinuclear complexes [Cu₂(bpmen)₂(μ-1,5-dca)]₂(ClO₄)₅dca (2) and [Ni(cyclen)(μ-1,5-dca)]₂(ClO₄)₂ (3). These complexes were characterized by IR and UV-Vis spectroscopy. Room temperature single-crystal X-ray studies have confirmed that the Cu(II) centers in 1 and 2 adopt geometries that are more close to trigonal bipyramidal (TBP) in 1 and close to square pyramidal (SP) in 2, whereas in 3, the Ni(II) centers are located in octahedral environment with doubly bridged μ-1,5-dca bonding mode. The intermolecular M···M distances in these complexes are in the range of 7.3-8.6 Å. Variable temperature magnetic susceptibility studies have confirmed that the dca-bridges mediate very weak antiferromagnetic interaction between the M(II) centers with J values of −0.35, −0.18 and −0.43 cm⁻¹ for 1, 2 and 3, respectively. The results are compared and discussed in the light of other related bridged μ-1,5-dca Cu(II) and Ni(II) complexes.