Dinuclear ruthenium sawhorse-type complexes containing carboxylato bridges and ferrocenyl substituents: Synthesis and electrochemistry

The ferrocenyl-containing diruthenium complexes [Ru₂(CO)₄(μ₂-η²-OOCFc)₂L₂] (Fc = ferrocenyl, fc = ferrocen-1,1′-diyl; 1: L = NC₅H₄-COOC₆H₄-OC₁₀H₂₁, 2: L = NC₅H₄-COOC₆H₄-OC₁₆H₃₃, 3: L = NC₅H₄-OOC-fc-C₁₂H₂₅) and [Ru₂(CO)₄(μ₂-η²-OOC₆H₅)₂(NC₅H₄-OOC-fc-C₁₂H₂₅)₂] (4) have been synthesized from Ru₃(CO)₁₂, ferrocene carboxylic or benzoic acid and the corresponding pyridine derivative. The synthesis of the new pyridine derivative NC₅H₄-OOC-fc-C₁₂H₂₅ used for the preparation of 3 and 4 is also reported. Complexes 1-4 posses a so-called sawhorse structure consisting of the Ru₂(CO)₄ backbone and two bridging carboxylato ligands, while the coordination sphere around the ruthenium atoms is completed by the pyridine-derived ligands bonded in the axial positions. The electrochemical behavior of 1-4 and their known analogues [Ru₂(CO)₄(μ₂-η²-OOCFc)₂L₂] (5: L = NC₅H₅, 6: L = P(C₆H₅)₃, 7: L = NC₅H₄-OOCFc) has been studied by voltammetry on rotating disc electrode and by cyclic voltammetry.     

Synthesis and characterization of mixed-ligand ruthenium(III) complexes with oxalate and acetylacetonate ions

Two mononuclear mixed-ligand ruthenium(III) complexes with oxalate dianion (ox²⁻) and acetylacetonate ion (2,4-pentanedionate, acac⁻), K₂[Ru(ox)₂(acac)] (1) and K[Ru(ox)(acac)₂] (2), were prepared as a candidate for a building block. In fact, reaction of complex 2 with manganese(II) sulfate gave a heterometallic tetranuclear complex, TBA[Mn^II{(μ-ox)Ru^III(acac)₂}₃] (5) in the presence of tetrabutylammonium (TBA) bromide. The ¹H NMR, UV-Vis, selected IR and FAB mass spectral data of these complexes are presented. Both mixed-ligand ruthenium(III) complexes gave a Nernstian one-electron reduction step in 0.1 mol dm⁻³ Na₂SO₄ aqueous solution on a mercury electrode at 25 °C. Comparison of observed reversible half-wave potentials with calculated values for a series of [Ru(ox)_n(acac)_3 − n]ⁿ⁻ (n=0-3) complexes by using Lever’s ligand electrochemical parameters is presented.     

Comparing the spectroscopic and electrochemical properties of ruthenium and osmium complexes of the tridentate polyazine ligands 2,2′:6′,2″-terpyridine and 2,3,5,6-tetrakis(2-pyridyl)pyrazine

A number of osmium and ruthenium complexes of the tridentate ligands 2,2′:6′,2″-terpyridine (tpy) and 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tpp) have been prepared and characterized by our laboratory. All these complexes possess metal based oxidations and ligand based reductions localized on each polyazine ligand. Polymetallic complexes bridged by the tpp ligand exhibit two sequential tpp based reductions prior to the reduction of other polyazine ligands in these complexes. The spectroscopy of these complexes is dominated by ligand based π-π^* transitions in the ultraviolet and MLCT (metal-to-ligand charge transfer) bands terminating on each polyzine ligand in the visible. For the complexes reported herein the lowest lying optical transitionis a M → BL CT band. For most of the complexes reported, occupation of this excited state gives rise to an observable emission at room temperature. For ruthenium complexes of these tridentate ligands, the presence of a low-lying LF state shortens the excited state lifetimes of these chromophores. This gives rise to ruthenium complexes that display shorter excited state lifetimes than the analogous osmium based systems. Incorporation of tpp based chromophores into polymetallic frameworks leads to the production of bimetallic species with long-lived excited states, 100 ns at room temperature. This makes these chromophores good candidates for the development of stereochemically defined supramolecular complexes. It is possible to measure an electrochemical HOMO-LUMO energy gap and a correlation between this electrochemically measured energy gap and the spectroscopic energy associated with this HOMO→LUMO transition are reported herein (HOMO== highest occupied molecular orbital, LUMO = lowest unoccupied molecular orbital).     

Electrochemical behavior of polymeric complexes of monosubstituted squarate ligands. Part 2. Determination of redox species of manganese(II) complexes in the donor solvents, dimethylformamide and dimethylsulfoxide

Cyclic and square wave voltammetry (−1500 to 1500 mV) of {Mn[μ-(C₆H₅)₂NC₄O₃]₂[H₂O]₄}_n [manganese(II) diphenylaminosquarate] (1) and [Mn(μ-C₆H₅C₄O₃)(C₆H₅C₄O₃)(H₂O)₃]_n [manganese(II) phenylsquarate] (2) at a gold disk electrode in dimethylsulfoxide (DMSO) and dimethylformamide (DMF), reveal several couples attributable to both ligand and metal-based redox processes. For the manganese(II) phenylsquarate in DMF, the metal-based peaks are more numerous and readily discernible than in DMSO. In either of the solvents, the ligand-based peaks always occur at more positive or more negative potentials than the metal-based ones. In 1 and 2, Mn(II)/Mn(0), Mn(III)/Mn(II), Mn(IV)/Mn(III) and Mn(V)/Mn(IV) couples are observed. However, the manganese redox peaks appear at more negative potentials in 1.     

The syntheses, structures and redox properties of phosphine-gold(I) and triruthenium-carbonyl cluster derivatives of tolans

The syntheses of several ethynyl-gold(I)phosphine substituted tolans (1,2-diaryl acetylenes) of general form [Au(CCC₆H₄CCC₆H₄X)(PPh₃)] are described [X = Me (2a), OMe (2b), CO₂Me (2c), NO₂ (2d), CN (2e)]. These complexes react readily with [Ru₃(CO)₁₀(μ-dppm)] to give the heterometallic clusters [Ru₃(μ-AuPPh₃)(μ-η¹,η²-C₂C₆H₄CCC₆H₄X)(CO)₇(μ-dppm)] (3a-e). The crystallographically determined molecular structures of 2b, 2d, 2e and 3a-e are reported here, that of 2a having been described on a previous occasion. Structural, spectroscopic and electrochemical studies were conducted and have revealed little electronic interaction between the remote substituent and the organometallic end-caps.     

Nitrogen atom transfer and redox chemistry of terpyridyl phosphoraniminato complexes of osmium (IV)

Rapid reactions occur between [Os^VI(tpy)(Cl)₂(N)]X (X = PF₆⁻, Cl⁻, tpy = 2,2′:6′,2″-terpyridine) and aryl or alkyl phosphi nes (PPh₃, PPh₂Me, PPhMe₂, PMe₃ and PEt₃) in CH₂Cl₂ or CH₃CN to give [Os^IV(tpy)(Cl)₂(NPPh₃)]⁺ and its analogs. The reaction between trans-[Os^VI(tpy)(Cl)₂(N)]⁺ and PPh₃ in CH₃CN occurs with a 1:1 stoichiometry and a rate law first order in both PPh₃ and Os^VI with k(CH₃CN, 25°C) = 1.36 ± 0.08 × 10⁴ M⁻ s⁻¹. The products are best formulated as paramagnetic d⁴ phosphoraniminato complexes of Os^IV based on a room temperature magnetic moment of 1.8 μ_B for trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆), contact shifted ¹H NMR spectra and UV-Vis and near-IR spectra. In the crystal structures of trans-[Os^IV(tpy)(Cl)₂( NPPh₃)](PF₆)·CH₃CN (monoclinic, P2₁/n with a = 13.384(5) Å, b = 15.222(7) Å, c = 17.717(6) Å, β = 103.10(3)°, V = 3516(2) ų, Z = 4, R_w = 3.40, R_w = 3.50) and cis-[Os^IV(tpy)(Cl)₂(NPPh₂Me)]-(PF₆)·CH₃CN (monoclinic, P2₁/c, with a = 10.6348(2) Å, b = 15.146(9) ÅA, c = 20.876(6) Å, β = 97.47(1)°, V = 3334(2) ų, Z = 4, R = 4.00, R_w = 4.90), the long Os-N(P) bond lengths (2.093(5) and 2.061(6) Å), acute Os-N-P angles (132.4(3) and 132.2(4)°), and absence of a significant structural trans effect rule out significant Os-N multiple bonding. From cyclic voltammetric measurements, chemically reversible Os^V/IV and Os^IV/III couples occur for trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) in CH₃CN at +0.92 V (Os^V/IV) and −0.27 V (Os^IV/III) versus SSCE. Chemical or electrochemical reduction of trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) gives isolable trans-Os^III(tpy)(Cl)₂(NPPh₃). One-electron oxidation to Os^V followed by intermolecular disproportionation and PPh₃ group transfer gives [Os^VI(tpy)Cl₂(N)]⁺, [OS^III(tpy)(Cl)₂(CH₃CN)]⁺ and [Ph₃=N=PPh₃]⁺ (PPN⁺). trans-[Os^IV(tpy)(Cl)₂(NPPh₃)](PF₆) undergoes reaction with a second phosphine under reflux to give PPN⁺ derivatives and Os^II(tpy)(Cl)₂(CH₃CN) in CH₃CN or Os^II(tpy)(Cl)₂(PR₃) in CH₂Cl₂. This demonstrates that the Os^VI nitrido complex can undergo a net four-electron change by a combination of atom and group transfers.     

Electrochemical studies of DNA immobilization onto the azide-terminated monolayers and its interaction with taxol

A surface modification procedure for the creation of self-assembled monolayers (SAMs) that can be used as a scaffold for double-stranded DNA (dsDNA) incorporation onto the gold surfaces is described. The SAMs of an azidohexane thiol derivative were prepared on the Au electrode and then used for the immobilization of dsDNA. The electrochemical characteristics of dsDNA onto the SAM-modified gold electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy, and the surface concentration of dsDNA onto the SAMs surface was estimated. The interaction of dsDNA with the anticancer drug, taxol (paclitaxel), was also studied on the surface of DNA/SAM/Au electrode. The observed decrease in the guanine oxidation peak current was used to monitor the interaction of taxol with DNA. The resulting Langmuir isotherm for taxol binding to DNA at the modified electrode was used to evaluate the binding constant of taxol-DNA. The results obtained supported the groove binding interaction of taxol with DNA. The modified electrode was used as a sensitive sensor for quantification of taxol in human serum sample.     

The influence of inductive ligand electronics on the metrical parameters and redox potentials of a series of manganese(II) compounds

In order to assess the changes in the redox activity of a metal ion that result from inductive effects, three electronically modified derivatives of the ligand, N-benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^H), have been prepared: N-(4-nitro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^NO2), N-(4-chloro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^Cl), and N-(4-methoxy)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^OMe). Due to the lack of a fully conjugated π-system between the 4-benzyl substituent and the N-donors, the electronic perturbation should influence a bound metal ion’s redox properties through primarily inductive pathways. The organic ligands react with MnCl₂ to form mononuclear complexes with the general formula [Mn(L^R)Cl₂]. The parent ligand, L^H, and its three derivatives each coordinate Mn(II) ions in a cis-α conformation, with the amine N-donors installed trans to the Mn-Cl bonds. Despite its distance from the metal ion, the electron-donating or - withdrawing group has a notable impact on both the metrical parameters of the Mn(II) compounds and the Mn(III/II) reduction potential. A single inductive perturbation can vary the reduction potential by as much as 50 mV.     

Synthesis, characterization, and properties of binuclear ruthenium complexes with dendritic side chains on their bridges

Three binuclear ruthenium complexes with dendritic side chains, 1,4-[RuCl(CO)(PMe₃)₃CHCH]₂C₆H₂-2,5-(G_n)₂ with G_n = G₀ (1), G₁ (2), and G₂ (3), have been synthesized by the reactions of the corresponding diethynylaryls with the ruthenium hydride complex [RuHCl(CO)(PPh₃)₃] and subsequent ligand exchange with PMe₃. The complexes have been characterized by elemental analysis, NMR, and UV-Vis spectrophotometry. The structure of complex 1 has been determined by X-ray crystallography. Their electrochemical properties have been investigated. Electrochemical studies in solution may imply that the two metal centers in complexes 1-3 have good electronic communications between each other. However, the electron communication is not effectively enhanced with increasing generation of the dendrons in solution.     

Solvent and pH effects on the redox behavior and catecholase activity of a dicopper complex with distant metal centers

A dicopper complex is described for which significant catecholase activity was found, particularly for a compound in which the two metal ions are more than 7 Å apart. Variations on the catecholase activity of this complex were explored in a range of pH values from 5.5 to 9.0 in two solvent mixtures, MeCN/H₂O and MeOH/H₂O. The catalytic performance of the complex was found to be substantially better in the second, where the maximum activity was achieved at a pH value one unit lower than in the first. Electrochemical studies of the complex in the absence and presence of dioxygen revealed a very different behavior in each of the two solvent mixtures, which may account for the correspondingly distinct catalytic activity.     

Tuning redox and spin state properties of Fe(II) N-heterocyclic complexes via electronic/steric influence on metal-ligand binding

A series of complexes with the general formula [Fe(L)₂]²⁺, where L represents the tridentating 6-(N-3,5-dimethylpyrazolyl)2,2^′-bipyridine (L⁴); 6-(N-pyrazolyl-1-ylmethyl)-2,2^′-bipyridine (L⁵); and 6-(N-3,5-dimethylpyrazolyl-1-ylmethyl)-2,2^′-bipyridine (L⁶), were prepared and characterized. The room temperature solution magnetic susceptibility and redox properties of these compounds were investigated as a function of stepwise variation in the ligand structure. The Fe(III/II) couple was characterized by way of cyclic voltammetry using aprotic solvent conditions (acetonitrile) where each complex was observed to have reversible behavior. NMR methodology was used for measuring the magnetic susceptibilities where both [Fe(L⁴)₂]²⁺ and Fe(L⁵)₂]²⁺ exhibited diamagnetic low spin behavior; however, [Fe(L⁶)₂]²⁺ measured a μ_eff of 4.1 Bohr-magnetons indicating spin equilibrium predominantly in the high spin state.     

Synthesis, characterization and electrochemistry of bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes

Five bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes (4a-4e) are prepared by reactions between di-μ-chlorodichlorobis[(1-3η:6-8η)-2,7-dimethyl-octadienyl]diruthenium and the corresponding dienes. The larger aryl substituents increase the barrier to rotation in 4a-4e relative to bis(3-methyl-6,6-cyclohexadienyl)ruthenium (5b). The activation parameters were determined by line-shape analysis for the exchange process in 4a: ΔG^† (183 K), 8.0 ± 0.2 kcal/mol; ΔH^†, 10.3 kcal/mol; and ΔS^†, 13 cal/mol/K. The electronic effect of the aryl substituents on the cyclohexadienyl ligand on the oxidation potential of the complex are compared to the effect of methyl substituents.     

Tuning of redox potential and visible absorption band of ruthenium(II) complexes of (benzimidazolyl) derivatives: Synthesis, characterization, spectroscopic and redox properties, X-ray structures and DFT calculations

Six ruthenium(II) complexes have been prepared using the tridentate ligands 2,6-bis(benzimidazolyl) pyridine and bis(2-benzimidazolyl methyl) amine and having 2,2′-bipyridine, 2,2′:6′,2″-terpyridine, PPh₃, MeCN and chloride as coligands. The crystal structures of three of the complexes trans-[Ru(bbpH₂)(PPh₃)₂(CH₃CN)](ClO₄)₂ · 2H₂O (2), [Ru(bbpH₂)(bpy)Cl]ClO₄ (3) and [Ru(bbpH₂)(terpy)](ClO₄)₂ (4) are also reported. The complexes show visible region absorption at 402-517 nm, indicating that it is possible to tune the visible region absorption by varying the ancillary ligand. Luminescence behavior of the complexes has been studied both at RT and at liquid nitrogen temperature (LNT). Luminescence of the complexes is found to be insensitive to the presence of dioxygen. Two of the complexes [Ru(bbpH₂)(bpy)Cl]ClO₄ (3) and [Ru(bbpH₂)(terpy)](ClO₄)₂ (4) show RT emission in the NIR region, having lifetime, quantum yield and radiative constant values suitable for their application as NIR emitter in the solid state devices. The DFT calculations on these two complexes indicate that the metal t_2g electrons are appreciably delocalized over the ligand backbone.     

Synthesis and characterization of polypyridineruthenium(II) complexes containing a linear ambidentate ligand, NCO or NCS, and reaction of isocyanato complexes under acidic conditions

Isocyanato and isothiocyanatopolypyridineruthenium complexes, [Ru(NCX)Y(bpy)(py)₂]ⁿ⁺ (bpy=2,2′-bipyridine, PY=pyridine; X=O, Y=NO₂ for n=0, and Y=py for n=1; X=S, Y=NO₂ for n=0, Y=NO for n=2, and Y=py for n=1), were synthesized by the reaction of polypyridineruthenium complexes with potassium cyanate or sodium thiocyanate salt. Isocyanatoruthenium(II) complexes, [Ru(NCO)(NO₂)(bpy)(py)₂] and [Ru(NCO)(bpy)(py)₃]⁺, react under acidic conditions to form the corresponding ammineruthenium complexes, [Ru(NO)(NH₃)(bpy)(py)₂]³⁺. The molecular structures of [Ru(NCO)(bpy)(py)₃]ClO₄, [Ru(NCS)(NO)(bpy)(py)₂](PF₆)₂ and [Ru(NO)(NH₃)(bpy)(py)₂](PF₆)₃ were determined by X-ray crystallography.     

Synthesis and characterization of iron and ruthenium complexes bearing P-N ligands based on 8-hydroxyquinoline

The synthesis of bidentate aminophosphine ligands (PN^quin) based on 8-hydroxyquinoline is described. These ligands react with cis-Fe(CO)₄Br₂ to give selectively octahedral complexes of the type cis,cis-Fe(PN^quin)(CO)₂Br₂. There is only one isomer formed where the two CO and the two bromide ligands adopt a cis configuration. The reaction of [RuCp(CH₃CN)₃]PF₆ with PN^quin ligands affords the halfsandwich complexes [RuCp(PN^quin)(CH₃CN)]PF₆ in high isolated yields. Likewise, treatment of [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ with PN^quin in the presence of AgCF₃SO₃ affords halfsandwich complexes of the type [Ru(η⁶-p-cymene)(PN^quin)Cl]CF₃SO₃. All ligands and complexes are characterized by NMR and IR spectroscopy. The X-ray structure of representative compounds is reported. In addition, the relative stability of isomeric structures and conformers of Fe(PN^quin-Ph)(CO)₂Br₂ is studied by means of DFT calculations.     

Electrochemical reactions of horse heart cytochrome c at graphite electrodes

The interaction of cytochrome c with a paraffin-wax-impregnated spectroscopic graphite electrode (WISGE) was studied in a medium consisting of 0.1 M potassium phosphate, pH 7.0, by means of differential pulse and cyclic voltammetry. Ferricytochrome c yields on voltammograms a single cathodic peak C around a potential of -0.3 V (vs. Ag/AgCl) and two anodic peaks AI and AII around the potentials of 0.66 and 0.89 V, respectively. Cathodic peak C corresponds to a catalytic reaction during which ferricytochrome c is reduced to ferrocytochrome c: ferricytochrome c is then regenerated by chemical oxidation of ferrocytochrome c by oxygen adsorbed at the WISGE surface. The first, more negative anodic peak AI corresponds to anodic electrochemical oxidation of tyrosine residues, whereas the second, more positive anodic peak (peak AII) corresponds to an anodic reaction of haemin. Voltammetry at a WISGE may provide a valuable technique for obtaining data about cytochrome c properties on electrically charged surface.     

From triplesalen to triplesalacen: Synthesis spectroscopic, redox, and magnetic properties of the trinuclear Cu3 triplesalacen complex

The tris(tetradentate) triplesalacen ligand H₆talacen and its trinuclear copper complex, namely [(talacen)Cu^II₃], were synthesized and its molecular and electronic structure determined. The ligand is prepared by the triple condensation of 2,4,6-trisacetyl-1,3,5-trihydroxybenzene (1) and excess acacen half-unit (2). The molecular structure of [(talacen)Cu^II₃] exhibits a strong ligand folding around the central Cu^II-phenolate bonds. This ligand folding is stronger than that observed in the trinuclear copper triplesalen complexes. The electronic absorption spectrum exhibits a prominent intense band at 32 400 cm⁻¹ and d-d transitions around 19 000 cm⁻¹. These spectral features are related to the ligand folding, which opens an O^Ph(p_z)-Cu^II(d_x²-y²) bonding pathway. Electrochemical studies provide an irreversible oxidation at a relatively low potential of 0.17 V versus Fc⁺/Fc, which is assigned to a ligand-centered oxidation of the central phloroglucinol backbone. A ferromagnetic coupling of J = 1.20 cm⁻¹ (H=∑_i<j-2J_ijS_iS_j) is established in agreement with the spin-polarization mechanism. A critical analysis of the bond distances of the central phloroglucinol unit provides evidence that not only the usual phenolate-imine but also the keto-enamide mesomeric form contribute to the resonance hybrid. This might explain the relatively weak ferromagnetic coupling.     

Formation of dioxygen complexes of transition metal chelates in oxygen saturated aprotic solvents. Cyclic voltammetric evidence at a micro glassy carbon disk electrode

Cyclic voltammetry at a micro electrode of Co(II) salen, Fe(II) salen, electrode generated Fe(II)(acac)₂, Fe(II) (salicylaldehyde)₂, Fe(II) (salicylaldoxime)₂, Fe(II) (bipy)₃, Fe(II) (bipy)₂, Co(II) (bipy)₃, Co(II) (benzacac)₂, and electrode generated Co(acac)₂ in oxygen saturated aprotic solvents show positive shift of the O₂ sigmoidal wave, as well as enhancement of the limiting current in the case of the first five compounds. In the case of Co(II) (bipy)₃ the slope of the sigmoidal wave due to O₂ becomes more positive, while for the other two Co(II) complexes there is no change except a small decrease in the wave height. The data are used to correlate and predict the O₂ binding properties of the chelates in solution. The data for the diketone complexes of Co(II) indicate absence of any direct association, which is in line with the interpretation offered in the literature on the mechanism of their catalytic role in the O₂ oxidation of substrates. The mechanism of the autoxidation of dimethylformamide in the presence of Fe(III) (bipy)₃ and Cu(II) (bipy)₂ is elucidated by the observation that these higher valent compounds are reduced to their next lower oxidation state by DMF.     

Synthesis and characterization of a dinuclear ferric complex with redox-active ligands

A dinuclear ferric complex with the redox-active ligand (L^Cl₂)^2- (H₂L^Cl₂ = N,N′-dimethyl-bis(3,5-dichloro-2-hydroxybenzyl)-1,2-diaminoethane), was synthesized and characterized. The two iron(III) ions are six-coordinate in a distorted octahedral environment of the donor set of one (L^Cl₂)²⁻ and one amine and one phenolate donor of a second (L^Cl₂)²⁻, which bridges the two complex halves. The relatively low-symmetric complex 1 crystallizes in the space group R. The crystal structure contains hexagonal, one-dimensional channels parallel to the c axis with diameters of ∼13 Å. The absorption spectrum of 1 exhibits strong characteristic features of p_π → d_π^∗, p_π → d_σ^∗, phenolate-to-metal CTs, and π → π^∗ ligand transitions. Electrochemical studies on 1 reveal the redox-activity of the coordinated ligand (L^Cl₂)²⁻ by showing irreversible oxidative electron-transfer waves. The reductive electron transfers at negative potentials seem to originate from metal-centered processes. A detailed comparison to complexes with similar donor sets provides new insights into the electrochemical properties of these kinds of complexes.     

Synthesis and characterization of ruthenium and osmium complexes of heterocyclic bidentate ligands (N, X), X = S, Se

The reaction of [RuCl₂(PPh₃)₃] and [OsBr₂(PPh₃)₃] precursors with a series of heterocyclic bidentate (N, X) ligands, X = S, Se, gave complexes [M(R-pyS)₂(PPh₃)₂], (R = H, 3-CF₃, 5-CF₃, 3-Me₃Si); [M(R-pymS)₂(PPh₃)₂], (R = 4-CF₃, 4,6-MeCF₃) and [M(R-pySe)₂(PPh₃)₂], (R = H, 3-CF₃, 5-CF₃), where M is Ru or Os, pyS and pymS the anions of pyridine-2-thione and pyrimidine-2-thione, respectively, and pySe is the anion produced by the reductive cleavage of the Se-Se bond in the dipyridyl-2,2′-diselenide. All of the compounds obtained were characterized by microanalysis, IR, FAB, NMR spectroscopy and by cyclic voltammetry. Compounds [Ru(3-CF₃-pyS)₂(PPh₃)₂] · 2(CH₂Cl₂) (2), [Ru(3-Me₃Si-pyS)₂(PPh₃)₂] (4), [Ru(4-CF₃-pymS)₂(PPh₃)₂] (5), [Ru(3-CF₃-pySe)₂(PPh₃)₂] · 2(CH₂Cl₂) (8), [Os(3-CF₃-pyS)₂(PPh₃)₂] · (CHCl₃) (11), [Os(3-Me₃Si-pyS)₂(PPh₃)₂] (13), [Os(3-CF₃-pySe)₂(PPh₃)₂] · 2(CH₂Cl₂) (17), [Os(5-CF₃-pySe)₂(PPh₃)₂] · 2(H₂O) (18) and [OsCl₂(4,6-MeCF₃-pymS)(PPh₃)₂] (19) were also characterized by X-ray diffraction. In all cases, the metal is in a distorted octahedral environment with the heterocyclic ligand acting as a bidentate (N, S) chelate system.