Optimizing production of extracellular lipase fromRhodotorula glutinis

Production of extracellular lipase byRhodotorula glutinis was substantially enhanced when the type and concentration of carbon and nitrogen source, the initial pH of culture medium and the growth temperature were consecutively optimized. Lipase activity as high as 30.4 U/ml of culture medium was obtained at optimum conditions, comparing favourably with most of the activities reported for other lipase hyperproducing microorganisms. The enzyme was optimally active at pH 7.5 and 35°C and had, at optimum pH, half-lives of 45 and 11.8 min at 45 and 55°C respectively. The high activity and kinetic characteristics of the enzyme make this process worthy of further investigation.     

A thermostable lipase produced by a newly isolated <Emphasis Type="Italic">Geotrichum</Emphasis>-like strain,R59

Growth and production of lipase by a new Geotrichum-like strain, R59, were studied. Production of extracellular lipase was substantially enhanced when the initial pH of the culture medium, types of carbon and nitrogen sources, substances probably stimulating the lipase biosynthesis, the temperature, and time of growth were optimized. Sucrose and triolein were the most effective carbon sources for lipase production. Maximum lipase activity (146 U/ml^–1) was obtained with urea as the nitrogen source. Growth at 30°C, an initial pH of 6.0 and incubation time of 48 h were found as optimum conditions for cell growth and production of lipase by Geotrichum-like strain R59. The enzyme was thermostable and exhibited very high activity after 1 h incubation at 60°C.     

Purification of lipase from Geotrichum candidum: conditions optimized for enzyme production using Box–Behnken design

The fungus Geotrichum candidum was selected from isolates of oil-mill waste as a potent lipase producer. Factors affecting lipase production by the fungus G. candidum in yeast-extract-peptone medium have been optimized by using a Box–Behnken design with seven variables to identify the significant correlation between effects of these variables in the production of the enzyme lipase. The experimental values were found to be in accordance with the predicted values, the correlation coefficient is 0.9957. It was observed that the variables days (6), pH (7.0), temperature (30 °C), carbon (1.25%), nitrogen (2.0%), Tween (1.0%) and salt concentrations (0.5 mM) were the optimum conditions for maximum lipase production (87.7 LU/ml). The enzyme was purified to homogeneity with an apparent molecular mass of 32 kDa by SDS-PAGE. The optimum pH at 40 °C was 7.0 and the optimum temperature at pH 7.0 was 40 °C. The enzyme was stable within a pH range of 6.5 to 8.5 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, and EDTA. However, the presence of Ca²⁺ and Ba²⁺ ions enhanced the activity of the enzyme.     

Purification of lipase from Cunninghamella verticillata and optimization of enzyme activity using response surface methodology

The fungus Cunninghamella verticillata was selected from isolates of oil-mill waste as a potent lipase producer as determined by the Rhodamine-B plate method. The lipase was purified from C. verticillata by ammonium sulphate fractionation, ion exchange chromatography and gel filtration. The purified enzyme was formed from a monomeric protein with molecular masses of 49 and 42 kDa by SDS–PAGE and gel filtration, respectively. The optimum pH at 40 °C was 7.5 and the optimum temperature at pH 7.5 was 40 °C. The enzyme was stable between a pH range of 7.5 and 9.0 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, CdCl₂ and EDTA. However, the presence of Ca²⁺, Mn²⁺ and Ba²⁺ ions enhanced the activity of the enzyme. The activity of purified lipase with respect to pH, temperature and salt concentration was optimized using a Box–Behnken design experiment. A polynomial regression model used in analysing this data, showed a significant lack of fitness. Therefore, quadratic terms were incorporated in the regression model through variables. Maximum lipase activity (100%) was observed with 2 mM CaCl₂, (pH 7.5) at a temperature of 40 °C. Regression co-efficient correlation was calculated as 0.9956.     

Enzymatic properties of lipase and characteristics production byLactobacillus delbrueckii subsp.bulgaricus

Some properties of an extracellular lipase produced byLactobacillus delbrueckii subsp.bulgaricus were studied. Maximum enzyme activity was found against olive and butter oil as enzyme substrates. Addition of 9% acacia gum, 0.1% Na-deoxycholate and 0.01 M CaCl₂ to the enzyme reaction mixture increased-lipase activity from 5.3 to 14.5 (FFA/mg protein/minute) at pH 6.0 and at 40° C. Maximum lipase production was reached in the presence of glucose as a sole source of carbon, wheat bran as nitrogen source, olive oil as a sole lipid source and butyric acid as fatty acid supporting the growth medium. An initial pH value of the culture medium of 6.0 and a temperature of 35° C gave the highest lipolytic activity.     

Observations of sporulation in Fonsecaea and Phialophora by scanning electron microscopy

An extracellular lipase produced by Thermomyces lanuginosus in palm fruit chaff infusion broth at 45 °C after 6 days of incubation was purified by a combination of ultrafiltration, ethanol precipitation and fractionation on DEAE-cellulose and gel-filtration on Sephadex G.200. A single peak of lipase activity with a tenfold increase in the activity of the enzyme was obtained. The partially purified T. lanuginosus lipase had a recovery value of 25%. Attempts to purify this enzyme further led to an almost complete loss of activity. The lipase had a pH optimum of 6.5 and peak activity at 40 °C. It readily hydrolysed both natural and synthetic triglycerides at 40 °C with optimal activities recorded on palm oil and triolein respectively.     

Production of a thermostable extracellular lipase by Kluyveromyces marxianus

Kluyveromyces marxianus was grown in submerged culture in a complex medium with several potential inducers of lipolytic activity (triacylglycerols, fatty acids). The highest extracellular lipolytic enzyme production (about 80 U ml^–1 in 3 d) was obtained when the medium was supplemented with 2 g urea l^–1 plus 5 g tributyrin l^–1. Addition of surfactants (1 g l^–1) did not improve production. The lipase had a high thermal stability in aqueous solution (73% residual activity after 9 d at 50 °C, 16 min half-life time at 100 °C). It was also stable at acidic pH and showed good tolerance to organic solvents (70% residual activity after 2 d in n-hexane of cyclohexane).     

Influence of cultivation conditions on the production of a thermostable extracellular lipase from Amycolatopsis mediterranei DSM 43304

Among several lipase-producing actinomycete strains screened, Amycolatopsis mediterranei DSM 43304 was found to produce a thermostable, extracellular lipase. Culture conditions and nutrient source modification studies involving carbon sources, nitrogen sources, incubation temperature and medium pH were carried out. Lipase activity of 1.37 ± 0.103 IU/ml of culture medium was obtained in 96 h at 28°C and pH 7.5 using linseed oil and fructose as carbon sources and a combination of phytone peptone and yeast extract (5:1) as nitrogen sources. Under optimal culture conditions, the lipase activity was enhanced 12-fold with a twofold increase in lipase specific activity. The lipase showed maximum activity at 60°C and pH 8.0. The enzyme was stable between pH 5.0 and 9.0 and temperatures up to 60°C. Lipase activity was significantly enhanced by Fe³⁺ and strongly inhibited by Hg²⁺. Li⁺, Mg²⁺ and PMSF significantly reduced lipase activity, whereas other metal ions and effectors had no significant effect at 0.01 M concentration. A. mediterranei DSM 43304 lipase exhibited remarkable stability in the presence of a wide range of organic solvents at 25% (v/v) concentration for 24 h. These features render this novel lipase attractive for potential biotechnological applications in organic synthesis reactions.     

Production of laccase byBotrytis cinerea and fermentation studies with strain F226

After induction, seven strains ofBotrytis cinerea released into the culture broth considerable amounts of laccase in a brief production time. The set-up of a suitable production process was studied with a selected strain in a 10-L fermenter. The optimum fermentation conditions were a 3% inoculum with a high degree of sporulation, a simple medium containing 20 g L^–1 of glucose and 2 g L^–1 of yeast extract at pH 3.5, 2 g L^–1 gallic acid as inducer, added after 2 days of growth, an agitation speed of 300 rpm, an aeration rate of 1.2 vvm and a temperature of 24°C. By optimizing the culture conditions, the enzyme activity reached 28 U ml^–1 in 5 days with a specific activity of 560 U mg^–1 protein. The best procedure to obtain a suitable crude enzyme preparation was concentration of the supernatant medium to 10% of the initial volume by ultrafiltration, followed by a fractional precipitation with ethanol. The optimum pH and temperature for laccase activity were 5.5 and 40°C, respectively, with syringaldazine as the substrate.     

High level expression and characterization of a novel thermostable, organic solvent tolerant, 1,3-regioselective lipase from Geobacillus sp. strain ARM

The mature ARM lipase gene was cloned into the pTrcHis expression vector and over-expressed in Escherichia coli TOP10 host. The optimum lipase expression was obtained after 18 h post induction incubation with 1.0 mM IPTG, where the lipase activity was approximately 1623-fold higher than wild type. A rapid, high efficient, one-step purification of the His-tagged recombinant lipase was achieved using immobilized metal affinity chromatography with 63.2% recovery and purification factor of 14.6. The purified lipase was characterized as a high active (7092 U mg⁻¹), serine-hydrolase, thermostable, organic solvent tolerant, 1,3-specific lipase with a molecular weight of about 44 kDa. The enzyme was a monomer with disulfide bond(s) in its structure, but was not a metalloenzyme. ARM lipase was active in a broad range of temperature and pH with optimum lipolytic activity at pH 8.0 and 65 °C. The enzyme retained 50% residual activity at pH 6.0-7.0, 50 °C for more than 150 min.     

Oil/mineral-salts medium designed for easy recovery of extracellular lipase from Fusarium oxysporum AM3

Lipase production by the potato pathogen Fusarium oxysporum AM3 was investigated in a mineral medium using triolein and sodium nitrate as carbon and nitrogen sources, respectively. Medium design by factorial analysis of the medium components increased enzyme activity 9.4-folds over the standard medium. The simple medium composition promoted easy enzyme recovery to its homogeneity in a single step. The lipase showed optimum activity at pH 9.0 and 35 °C, with a K _M value of 7.5 mM for triolein and apparent molecular weight of 29.0 kDa. When assayed with different solvents, FoxAM3 lipase showed an increase on its activity by isooctane, isopropanol and acetone.     

Production and Properties of Lipase from a Newly Isolated Chromobacterium

Out of some 750 strains of microorganisms, a potent bacterium for lipase production was isolated from soil and was identified as Chromobacterium viscosum.

The bacterium accumulates lipase in culture fluid when grown aerobically at 26°C for 3 days in a medium composed of soluble starch, soy bean meal, lard and inorganic salts.

Chromobacterium lipase had an optimum pH of 7.0 for activity at 37°C, and an optimal temperature of 65°C at pH 7.0. The enzyme retained 80% of the activity when heated for 10 min at 70°C. This lipase was capable of hydrolyzing a variety of natural fats and oils, and it was more active on lard and butter than on olive oil. The activity was stimulated by Ca²⁺, Mg²⁺, Mn²⁺ and inhibited by Cu²⁺, Hg²⁺ and Sn²⁺. It was not diminished but rather stimulated by a high concentration of bile-salts.     

Xylanases of marine fungi of potential use for biobleaching of paper pulp

Microbial xylanases that are thermostable, active at alkaline pH and cellulase-free are generally preferred for biobleaching of paper pulp. We screened obligate and facultative marine fungi for xylanase activity with these desirable traits. Several fungal isolates obtained from marine habitats showed alkaline xylanase activity. The crude enzyme from NIOCC isolate 3 (Aspergillus niger), with high xylanase activity, cellulase-free and unique properties containing 580 U l^–1 xylanase, could bring about bleaching of sugarcane bagasse pulp by a 60 min treatment at 55°C, resulting in a decrease of ten kappa numbers and a 30% reduction in consumption of chlorine during bleaching. The culture filtrate showed peaks of xylanase activity at pH 3.5 and pH 8.5. When assayed at pH 3.5, optimum activity was detected at 50°C, with a second peak of activity at 90°C. When assayed at pH 8.5, optimum activity was seen at 80°C. The crude enzyme was thermostable at 55°C for at least 4 h and retained about 60% activity. Gel filtration of the 50–80% ammonium sulphate-precipitated fraction of the crude culture filtrate separated into two peaks of xylanase with specific activities of 393 and 2,457 U (mg protein)^–1. The two peaks showing xylanase activity had molecular masses of 13 and 18 kDa. Zymogram analysis of xylanase of crude culture filtrate as well as the 50–80% ammonium sulphate-precipitated fraction showed two distinct xylanase activity bands on native PAGE. The crude culture filtrate also showed moderate activities of -xylosidase and -l-arabinofuranosidase, which could act synergistically with xylanase in attacking xylan. This is the first report showing the potential application of crude culture filtrate of a marine fungal isolate possessing thermostable, cellulase-free alkaline xylanase activity in biobleaching of paper pulp.     

Physiological and enzymatic characterization of a novel pullulan-degrading thermophilic Bacillus strain 3183

Summary A new thermophilic Bacillus strain 3183 (ATCC 49341) was isolated from hot-spring sediments. The organism grew on pullulan as a carbon source and showed optimum pH and temperature at pH 5.5 and 62° C, respectively, for growth. The strain reduced nitrate to nitrite both aerobically and anaerobically. It produced extracellular thermostable pullulanase and saccharidase activities which degraded pullulan and starch into maltotriose, maltose, and glucose. Medium growth conditions for pullulanase production were optimized. The optimum pH and temperature for pullulanase activity were at pH 6.0 and 75° C, respectively. The enzyme was stable at pH 5.5-7.0 and temperature up to 70° C in the absence of substrate. The K _m for pullulan at pH 6.0 and 75° C was 0.4 mg/ml. The pullulanase activity was stimulated and stabilized by Ca²⁺. It was inhibited by ethylenediaminetetraacetate (EDTA), beta and gamma-cyclodextrins but not by alpha-cyclodextrin and reagents that inhibit essential enzyme SH-groups. Offprint requests to: B. C. Saha     

Purification and properties of the lipases from Rhodotorula pilimanae Hedrick and Burke

Summary The Rhodotorula pilimanae CBS 5804 strain secretes into the culture medium two lipases: their pH optima are 4 and 7. The two lipases were purified by precipitation with acetone followed by chromatography on SP-Sephadex C50 and Sephadex G200. The purification factors achieved in comparison with the supernatant culture were x74 for lipase I and x90 for lipase II. The molecular weights were estimated at 172,800 and 21,400 for lipase I and lipase II, respectively. Their activities are optimal between 45°C and 55°C. The activation energies were 5.9 kcal·mole^-1 for lipase I and 12.4 kcal·mole^-1 for lipase II. The inactivation energies were about 21.9 and 17.7 kcal·mole^-1 for lipase I and lipase II, respectively. The enzymes are slightly inhibited by Cu²⁺, Co²⁺, Hg²⁺, Mn²⁺, N-acetylacetone, acetic acid and sodium lauryl sulphate. EDTA did not affect their enzymatic activity. These two lipases are secreted in the culture media in the absence of inducer; their biosynthesis is not inhibited by glucose. These lipases hydrolyse primarily the 1-(or 3-)position of all triglycerides tested.     

Production of extracellular alkaline lipase by a new thermophilicBacillus sp

A thermophilic soil isolate—Bacillus sp. RS-12, grew optimally at 50°C and not below 40°C. Production of an extracellular lipase by this organism was substantially enhanced when the type and concentration of carbon and nitrogen sources and initial pH of the culture medium were consecutively optimized. The lipase production was found to be growth-associated with maximum secretion in the late exponential growth phase,i.e. 15h of incubation. The enzyme activity as high as 0.98 nkat/mL was obtained under optimum conditions. Tween 80 (0.5%) and yeast extract (0.5%) were found to be the best carbon and nitrogen sources inducing maximum enzyme yield with initial pH 8.0 at 50°C. The kinetic characteristics of the crude lipase indicated the highest activity at 50–55°C and pH 8.0. It had a half life of 60, 18 and 15 min at 65, 70 and 75°C, respectively.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Cultivation conditions and properties of extracellular crude lipase from the psychrotrophic fungus Penicillium chrysogenum 9′

Among 97 fungal strains isolated from soil collected in the arctic tundra (Spitsbergen), Penicillium chrysogenum 9 was found to be the best lipase producer. The maximum lipase activity was 68 units mL^–1 culture medium on the fifth day of incubation at pH 6.0 and 20°C. Therefore, P. chrysogenum 9 was classified as a psychrotrophic microorganism. The non-specific extracellular lipase showed a maximum activity at 30°C and pH 5.0 for natural oils or at pH 7.0 for synthetic substrates. Tributyrin was found to be the best substrate for lipase, among those tested. The K_m and V_max were calculated to be 2.33 mM and 22.1 units mL^–1, respectively, with tributyrin as substrate. The enzyme was inhibited more by EDTA than by phenylmethylsulfonyl fluoride and was reactivated by Ca²⁺. The P. chrysogenum 9 lipase was very stable in the presence of hexane and 1,4-dioxane at a concentration of 50%, whereas it was unstable in presence of xylene.     

Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

A novel alkaline, thermostable, protease-free lipase from Pseudomonas sp.

An extracellular, alkali-tolerant, thermostable lipase was from a Pseudomonas sp. It had optimal activity at 65 °C and retained 75% of its activity at 65 °C for 90 min. The pH optimum was 9.6 and it retained more than 70% activity between pH 5 and 9 for 2 h. The culture broth was free of protease and, at 30 °C, the culture filtrate retained all the activity for at least 7 days, without any stabilizer. In shake flask culture, addition of groundnut oil (3 g l^–1) towards the end of growth phase increased the activity from 4 U ml^–1 to 8 ml^–1.