ETHYL ALCOHOL REDUCTION OF SALMONELLA TYPHIMURIUM IN POULTRY FEED

This study was designed to evaluate the effect of ethyl alcohol as a potential treatment for reduction of Salmonella populations in poultry feed. Growth rate of S. typhimurium in tryptic soy broth was significantly reduced by addition of greater than 0.3% volume/volume of ethyl alcohol and growth was completely inhibited by addition of 5% ethyl alcohol. Ethyl alcohol concentrations of 20% volume/weight and greater significantly reduced initial S.typhimurium populations in poultry feed (for 20% treated, 2.31 ± 0.31 vs 3.39 ± 0.29 for untreated; P < 0.05). When feed treatment was administered either before or after inoculation of S. typhimurium with 60% ethyl alcohol or 0.04% buffered propionic acid, populations in feeds treated after inoculation were decreased to a nondetection level (< 1.0 log₁₀ CFU/g) by ethyl alcohol treatment but not by other treatments. Ethyl alcohol treatment may have the potential for reducing Salmonella spp. contamination in poultry feed.     

SURVIVAL OF AN UNIRRADIATED SALMONELLA TYPHIMURIUM MARKER STRAIN INOCULATED IN POULTRY FEEDS AFTER IRRADIATION

The present study was designed to compare unirradiated Salmonella typhimurium survival during storage after inoculation in either irradiated or unirradiated poultry feed. The effects of irradiation (5 kGy) on the indigenous feed microflora and on the survival of marker strain of S. typhimurium contaminated after irradiation treatment were determined during 56 days of storage of either soybean meal (SBM) or meat and bone meal (MBM) based feeds. The initial aerobic bacterial populations were reduced more than 90% in both SBM (4.96 to 4.08 ± 0.03 log₁₀ CPU/g feed) and MBM (5.12 to 3.90 ± 0.03) by irradiation. Irradiation treatment reduced the average fungal counts during 56 days of storage in both SBM (4.24 to 2.74 ± 0.03) and MBM (4.38 to 2.15 ± 0.03) containing feeds. However, unirradiated S. typhimurium populations inoculated after irradiation of the feed were not different in either irradiated or nonirradiated SBM and MBM based feeds. Therefore, the differences in fungal versus bacterial sensitivity among the feed types and storage times suggests that gamma irradiation can alter the makeup of indigenous microbial populations in feed but this does not appear to have a discernible influence on subsequent survival of unirradiated S. typhimurium added as a dry inoculum after irradiation.     

Microbial load in poultry feed and detection of aflatoxin B1 using monoclonal antibody-based enzyme linked immunosorbent assay

Feed samples collected from different poultry farms and feed mills situated in Andaman and Nicobar islands in India were assessed for microflora and aflatoxin B₁ contamination. The bacterial counts ranged from 1.0 times 10⁷ to 8.8 times 10⁷ cfu/g of the feeds, while counts of fungi ranged from 1.0 times 10³ to 8.7 times 10³ cfu/g. The mycoflora comprised mainly of Aspergillus spp., A. flavus being most dominant. Aflatoxin B₁ was detected by monoclonal antibody-based enzyme linked immunosorbent assay technique and the content in different feed samples ranged from 5.5 to 90 ng/g.     

CYCLOHEXIMIDE AS A MEDIA AMENDMENT FOR ENUMERATING BACTERIAL POPULATIONS IN ANIMAL FEEDS

The present study was designed to evaluate cycloheximide as a potential media amendment for differential bacterial and fungal enumeration of animal feeds. The objectives of this study were to determine the effect of cycloheximide on bacterial growth rates and to evaluate its efficacy for the reduction of indigenous spreading fungi when enumerating bacterial populations in three types of feeds and after short or long-term storage. Escherichia coli, Bacillus cereus, Staphylococcus aureus, Listeria monocytogenes and Pseudomonas fluorescens were grown in tryptic soy broth containing cycloheximide to determine its effect on bacterial specific growth rates. Growth rates of B. cereus and S. aureus were significantly decreased by the addition of 600 and 1000 mg/L cycloheximide respectively, but other pure cultures were not significantly influenced by cycloheximide addition. Intrinsic bacterial populations from feed were not significantly affected by cycloheximide additions at concentrations from 10 to 300 mg/L, but the indigenous spreading molds from feeds were significantly decreased by these cycloheximide concentrations and were decreased below detection levels by 300 mg/L of cycloheximide. The addition of 300 mg/L of cycloheximide effectively eliminates fungal growth for accurate enumeration of bacterial populations in feeds.     

Effectiveness of a steam-vacuum sanitizer for reducing Escherichia coli O157:H7 inoculated to beef carcass surface tissue

A steam-vacuum sanitizer reduced aerobic plate counts associated with bovine faecal contamination from 5.5 log₁₀ cfu cm⁻² to 3.0 ± 0.21 log₁₀ cfu cm⁻² on beef carcass short plates. The same beef carcass short plates inoculated wiht 7.6 ± 0.09 log₁₀ cfu cm⁻² Escherichia coli O157: H7 in faeces, yielded an average residual level of E. coli O157: H7 of 2.1 ± 0.21 log₁₀ cfu cm⁻² after steam-vacuum treatments. This study demonstrates the effectiveness of a steam-vacuum sanitizer for removing E. coli O157: H7 from beef carcasses.     

Use of conductance measurements to detect growth of Clostridium botulinum in a selective medium

Growth of Clostridium botulinum in a selective medium (SBM) was monitored using conductance measurements. The correlation of log ₁₀ counts of spores and vegetative cells with detection times was highly significant ( r = 0.96, 0.97; P < 0.001). Log₁₀ counts of Cl. botulinum growing in pasteurized pork slurries also showed a clear linear relationship with detection times ( r = 0.77) but the confidence limits (± log₁₀ 2.3) of the regression line were too wide to estimate numbers of Cl. botulinum. For growth studies of Cl. botulinum in pork slurries detection times were useful in determining whether or not a visually unspoiled sample contained growing cells. Knowledge that a sample contained growing cells allowed a count to be made within 24 h, whereas 48 h would elapse before results from a traditional plate count were available.     

Decreased time for detection and quantification of virulent Bacillus anthracis and Yersinia pestis using a BioNanoPore (BNPTM) membrane technology

Many aspects of biodefense research require quantitative growth assessments of the test agent. This study evaluated the BioNanoPore (BNP™) technology to quantitate Bacillus anthracis and Yersinia pestis faster than traditional plate counting methods. The BNP™ technology enabled quantification of B. anthracis and Y. pestis in phosphate-buffered saline and naïve rabbit blood at 6 and 24 h, respectively. After 6 h of growth, counts for B. anthracis ranged from 6·19–6·45 log₁₀ CFU ml⁻¹ on BNP™, while counts after 24 h on tryptic soy agar (TSA) ranged from 6·51–6·58 log₁₀ CFU ml⁻¹. For Y. pestis , counts on BNP™ at 24 h ranged from 6·31–6·41 log₁₀ CFU ml⁻¹ on BNP™ and ranged from 6·44–6·89 log₁₀ CFU ml⁻¹ on TSA at 48 h. This study demonstrates that the BNP™ technology provides a more rapid detection of B. anthracis and Y. pestis , which could aid in the evaluation of potential medical countermeasures and treatments as well as other biological defense applications such as surface sampling or decontamination efficacy.     

MINIATURIZED TWO-FOLD DILUTION METHOD FOR ENUMERATING TOTAL MICROBIAL LOAD AND COLIFORMS IN RAW MILK

A rapid and simple method for enumerating total aerobic plate counts (APC) and coliforms in raw milk was developed and compared with conventional plating method. Following two-fold serial dilution of samples in a 96 well microtiter plate, double strength of two different modified media for APC or coliforms was added to each well. The final positive well (purple to yellow color) was determined and converted to dilution factors. The dilution factor of each sample was converted to Log₁₀ DF (Dilution factors) and compared to actual microbial numbers Log₁₀ CFU/mL. The results of 2-fold dilution method (Log₁₀ DF) were strongly correlated to conventional plating method (Log₁₀ CFU/mL) (P < 0.05). The correlation of the scatterplot of spread plating and 2-fold dilution method indicated a high level of agreement between two methods (R²= 0.921 for total counts and R²= 0.916 for forms from raw milk). This 2-fold dilution method is an easy, rapid, and economical method for enumeration of total microbial loads and coliforms in raw milk.     

Use of flow cytometry for enumeration of Mycoplasma mycoides subsp. mycoides large-colony type in broth medium

Aims:  The potential of using flow cytometry (FC) in combination with a fluorescent dye (SYBR green-I) for rapidly estimating Mycoplasma mycoides subSPS. mycoides large-colony type (MmmLC) in broth culture was examined.
Methods and Results:  The FC analysis was performed by staining the MmmLC cells with a fluorescent dye, SYBR green-I (SYBR), and the results were compared with plate count method (colony forming units, – CFUs). There was a good correlation (linear regression, r ² = 0·93) between mycoplasma counts determined by FC (cells ml⁻¹) and by traditional plate count method (CFU ml⁻¹). The lowest bacterial concentration detected by FC and traditional plate count was of the order of 10⁴ cells ml⁻¹ and 10³ CFU ml⁻¹, respectively. FC method allowed results in 20–30 min, whereas at least 24 h were necessary to obtain results with the traditional plate count method (CFU).
Conclusion:  Growth rates of MmmLC in broth medium determined by FC were highly reproducible and correlated well with mycoplasma counts assessed by the plate count method.
Significance and Impact of the Study:  These findings suggest that FC could be a good alternative to replace other time-consuming techniques that are currently used to enumerate mycoplasma in broth medium, such as plate count method (CFU).     

New media for detection and counting of clostridia in foods

The growth of pure cultures of Clostridium perfringens (ATCC 12922) and Cl. sporogenes (PA 3679) in five non-selective media, fluid thioglycollate medium (FTM), rapid perfringens medium (RPM), Columbia broth Malthus (CBM), reinforced clostridial medium (RCM) and lactose sulphite (LS), was monitored using conductance measurements with a Malthus analyser. Only FTM and CBM gave useful results. The correlation of log₁₀ plate counts on blood agar of the pure strain of Cl. sporogenes with detection times in FTM was highly significant ( r = 0·96, n = 73), and with detection times in CBM less so ( r = −0·909, n = 33). The correlation of log₁₀ counts on tryptose sulphite neomycin medium (TSN) of wild strains of Cl. sporogenes and Cl. perfringens with detection times with FTM in meat was also highly significant ( r = 0·933, n = 54).     

Evaluation of media and techniques to enumerate heterotrophic microbes from karst and sand aquifer springs

Several media and techniques were compared for their efficiency to enumerate viable heterotrophs from both a karst and sand aquifer spring. A medium designed to enumerate bacteria from nutrient-poor waters (HCFU) as well as R2A medium proved superior to tryptic soy agar; however, the difference was always less than one order of magnitude. Membrane filtration resulted in lower counts of microbes than the spread plate, multitube turbidity, or drop plate methods from samples of both sand and karst springs. The drop plate technique yielded higher viable counts from the sand spring and basin of the karst spring, with a precision of 21% (coefficient of variation) and a maximum plating efficiency of 3.4% (viable count/direct count × 100). Subsequently, 63% of isolates from drop plates were recovered on HCFU. Microcolonies were visible by epifluorescence microscopy, acridine orange staining, and subsequent examination of excised agar sections containing drops. Correspondence to: A.T. Mikell, Jr.     

Reduction of Brochothrix thermosphacta on beef surfaces following immobilization of nisin in calcium alginate gels

Lean and adipose beef carcass tissues inoculated with Brochothrix thermosphacta (BT) (approx. 4.50 log₁₀ cfu cm⁻²) were left untreated (U) or treated with 100 μg ml⁻¹ nisin (N), calcium alginate (A) or 100 μg ml⁻¹ nisin immobilized in a calcium alginate gel (AN). Tissue samples were refrigerated after treatments and bacterial populations and nisin activity were determined at 0, 1, 2 and 7 d. U, A and N treatments of lean and adipose tissues did not suppress bacterial growth (>6 log₁₀ cfu cm⁻² by day 7) while treatments of lean and adipose tissues with AN suppressed bacteria (>2.42 log₁₀ cfu cm⁻² by day 7). Bacteriocin titres from both tissues were higher in AN vs N samples after the 7 d incubation. This study demonstrates that immobilization of nisin in a gel may be a more effective delivery system of a bacteriocin to the carcass surface than direct application.     

The rapid estimation of microbial contamination of raw meat by measurement of adenosine triphosphate (ATP)

Bacteria were separated from raw meat homogenate by a simple three-stage process. Centrifugation (10 s at 2000 g) removed coarse particles; stirring with the cation exchange resin Bio-Rex 70 removed smaller particles and filtration through 0.22 μm membranes removed soluble materials. By this process 70—80% of the microbial populations of meat homogenates were consistently isolated on the filters. A linear relationship was found between log₁₀ microbial ATP and log₁₀ colony count of meat over the range 10⁵—10⁹ cfu/g. The value of ATP/cfu for meat samples was within the range previously reported for pure cultures. These data indicated that ATP extracted from the filters originated from bacteria in the meat samples. Several samples can be analysed simultaneously in an elapsed time of 20—25 min. The variability associated with estimates of both colony counts and ATP levels has been determined.     

A 20–24 H MICROCOLONY-IMMUNOBLOT TECHNIQUE to DIRECTLY DETECT and ENUMERATE LISTERIA MONOCYTOGENES INOCULATED INTO FOODS

A microcolony-immunoblot technique (MCIBI) was developed to directly enumerate, in less than 24 h, very low numbers of Listeria monocytogenes (8–12 colony forming units: CFU/g or mL) inoculated into foods. Four meat and poultry and two dairy products were artificially inoculated with L. monocytogenes V7 diluted and plated on Oxford agar medium. Each plate was overlaid with an Immobilon-P membrane and incubated for 18–20 h at 37C. Blot-transferred colonies on these membranes were probed with C11E9 monoclonal antibody (MAb) and developed using peroxidase conjugated goat antimo use Ig G and a water insoluble substrate (3,3-diaminobenzidin tetrahydmchloride; (DAB-HCI), Nickel chloride and H₂O₂). the MCIBT gave L. monocytogenes counts that were not significantly lower than direct colony counts on selective agars. This technique allowed the recovery of 94–100% of L. monocytogenes cells inoculated into foods containing natural background flora counts of 3 × 10⁴ to 8 × 10⁶ CFU/g or mL. Using a 2 h resuscitation period on nonselective agar before overlay with Oxford media, the MCIBT allowed detection of sublethally heat injured cells of strain V7.     

Use of impedance measurements to estimate numbers of antibiotic resistant Salmonella strains

Impedance detection times were compared with traditional plating methods for enumerating antibiotic-resistant strains of Salmonella stanley, Salm. thompson and Salm. infantis grown in laboratory medium and pork slurry. The correleation of log₁₀ counts of salmonellas with detection times was highly significant ( r = -0·96 for broth and r = -0·94 for slurries. The confidence limits (± og₁₀ 1·0 for broth and ± log₁₀ 1·65 for slurry) indicated that detection times could reliably be used as a rapid means of enumerating salmonellas when large numbers of counts of known strains are required for growth studies. Use of antibiotic-resistant strains also permitted their selective detection by impedance from the natural spoilage flora of pork slurry when the same antibiotics were incorporated in the detection medium.     

A new medium for the enumeration and subculture of bacteria from potable water

Plate count agar is presently the recommended medium for the standard bacterial plate count (35 degrees C, 48-h incubation) of water and wastewater. However, plate count agar does not permit the growth of many bacteria that may be present in treated potable water supplies. A new medium was developed for use in heterotrophic plate count analyses and for subculture of bacteria isolated from potable water samples. The new medium, designated R2A, contains 0.5 g of yeast extract, 0.5 g of Difco Proteose Peptone no. 3 (Difco Laboratories), 0.5 g of Casamino Acids (Difco), 0.5 g of glucose, 0.5 g of soluble starch, 0.3 g of K2HPO4, 0.05 g of MgSO4 X 7H2O, 0.3 g of sodium pyruvate, and 15 g of agar per liter of laboratory quality water. Adjust the pH to 7.2 with crystalline K2HPO4 or KH2PO4 and sterilize at 121 degrees C for 15 min. Results from parallel studies with spread, membrane filter, and pour plate procedures showed that R2A medium yielded significantly higher bacterial counts than did plate count agar. Studies of the effect of incubation temperature showed that the magnitude of the count was inversely proportional to the incubation temperature. Longer incubation time, up to 14 days, yielded higher counts and increased detection of pigmented bacteria. Maximal bacterial counts were obtained after incubation at 20 degrees C for 14 days. As a tool to monitor heterotrophic bacterial populations in water treatment processes and in treated distribution water, R2A spread or membrane filter plates incubated at 28 degrees C for 5 to 7 days is recommended.(ABSTRACT TRUNCATED AT 250 WORDS)     

A new medium for the enumeration and subculture of bacteria from potable water.

Plate count agar is presently the recommended medium for the standard bacterial plate count (35 degrees C, 48-h incubation) of water and wastewater. However, plate count agar does not permit the growth of many bacteria that may be present in treated potable water supplies. A new medium was developed for use in heterotrophic plate count analyses and for subculture of bacteria isolated from potable water samples. The new medium, designated R2A, contains 0.5 g of yeast extract, 0.5 g of Difco Proteose Peptone no. 3 (Difco Laboratories), 0.5 g of Casamino Acids (Difco), 0.5 g of glucose, 0.5 g of soluble starch, 0.3 g of K2HPO4, 0.05 g of MgSO4 X 7H2O, 0.3 g of sodium pyruvate, and 15 g of agar per liter of laboratory quality water. Adjust the pH to 7.2 with crystalline K2HPO4 or KH2PO4 and sterilize at 121 degrees C for 15 min. Results from parallel studies with spread, membrane filter, and pour plate procedures showed that R2A medium yielded significantly higher bacterial counts than did plate count agar. Studies of the effect of incubation temperature showed that the magnitude of the count was inversely proportional to the incubation temperature. Longer incubation time, up to 14 days, yielded higher counts and increased detection of pigmented bacteria. Maximal bacterial counts were obtained after incubation at 20 degrees C for 14 days. As a tool to monitor heterotrophic bacterial populations in water treatment processes and in treated distribution water, R2A spread or membrane filter plates incubated at 28 degrees C for 5 to 7 days is recommended.(ABSTRACT TRUNCATED AT 250 WORDS)     

The Effect of Temperature, Pressure and Chlorine Concentration of Spray Washing Water on Numbers of Bacteria on Lamb Carcases

Combined analysis of three experiments showed that when lamb carcases with initial bacterial numbers of between logi₁₀3.29 and 4.22/cm² were spray washed, statistically significant reductions in bacterial numbers of log₁₀O.5 were obtained when the spray wash water temperature was > 57°C, and reductions of log₁₀1.0 were obtained when the temperature was ≥ 80°C. Reductions at all temperatures were enhanced by log₁₀0.66 when the water contained 30 µg/ml chlorine, but increasing the concentration to 450 µg/ml reduced bacterial numbers only by a further log₁₀0–29. At highly contaminated sites increasing the duration of spraying from 30 to 120 s significantly increased the reductions obtained when water containing added chlorine was used. Reductions in bacterial numbers after spray washing with pressures of 3.5, 5.6. 7.7 kg/cm² were not significantly different.     

Efficacy of sodium hypochlorite and peracetic acid in sanitizing green coconuts

Aims:  To evaluate the efficacy of sanitizing green coconuts ( Cocos nucifera L.) through the treatment applied by juice industries using sodium hypochlorite and peracetic acid.
Methods and Results:  The surface of the fruits was inoculated with a mixture of five Listeria monocytogenes strains. The treatments consisted in immersing the fruits for 2 min at room temperature in sodium hypochlorite solution containing 200 mg l⁻¹ residual chlorine at pH 6·5, and 80 mg l⁻¹ solution of peracetic acid or sterile water. Bacterial populations were quantified by culturing on trypticase soy agar supplemented with yeast extract and Oxford selective culture medium; however, recovery was higher on the nonselective medium. Immersion in water produced a reduction in the L. monocytogenes population of 1·7 log₁₀ CFU per fruit, while immersion in sodium hypochlorite and peracetic acid solutions resulted in population reductions of 2·7 and 4·7  log₁₀ CFU per fruit respectively.
Conclusions:  The treatments studied are efficient to green coconuts.
Significance and Impact of the Study:  Sanitation of green coconut is one of the most important control measures to prevent the contamination of coconut water. This article provides information that shows the adequacy of sanitizing treatments applied by the juice industries.     

ASSESSMENT OF AN ESCHERICHIA COLI METHIONINE AUXOTROPH GROWTH ASSAY FOR QUANTIFYING CRYSTALLINE METHIONINE SUPPLEMENTED IN POULTRY FEEDS

Estimating availability of methionine is relevant to feed formulation since diets can be supplemented with crystalline methionine to meet the minimum requirements of rapidly growing birds. Bacterial assays have been developed to measure the bioavailable levels of several essential amino acids in feeds, including methionine. The E. coli methionine auxotroph strain used in this study exhibited a linear extent of growth response to increasing concentrations of methionine added to the minimal test media, in the range of 0 to 4 μg/mL. In addition the growth rates of the E. coli auxotroph were significantly (P < 0.01) different when the methionine concentrations were varied (0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 μg/mL) in minimal media. To assay feeds, feed grade methionine was added to poultry feed mixtures and samples were diluted with M9 media. Using this assay for estimating crystalline methionine added to feed, the extent of growth of the methionine auxotroph was correlated with the levels of crystalline methionine supplemented in the feed (R²= 0.9873). For all supplementation levels methionine recovery percentages ranged from 71 to 80% indicating that the bacterial assay response to crystalline methionine was relatively constant in the presence of the feed matrix. The overall results indicate that the rapid detection of crystalline methionine added to feeds is possible using this E. coli methionine auxotroph growth-based assay.