Circularization changes the folding transition state of the src SH3 domain

Native state topology has been implicated as a major determinant of protein-folding mechanisms. Here, we test experimentally the robustness of the src SH3-domain folding transition state to changes in topology by covalently constraining regions of the protein with disulfide crosslinks and then performing kinetic analysis on point mutations in the context of these modified proteins. Circularization (crosslinking the N and C termini) of the src SH3 domain makes the protein topologically symmetric and causes delocalization of structure in the transition state ensemble suggesting a change in the folding mechanism. In contrast, crosslinking a single structural element (the distal beta-hairpin) which is an essential part of the transition state, results in a protein that folds 30 times faster, but does not change the distribution of structure in the transition state. As the transition states of distantly related SH3 domains were previously found to be very similar, we conclude that the free energy landscape of this protein family contains deep features which are relatively insensitive to sequence variations but can be altered by changes in topology.     

Hydrophobic core packing in the SH3 domain folding transition state.

How tightly packed is the hydrophobic core of a folding transition state structure? We have addressed this question by characterizing the effects on folding kinetics of > 40 substitutions of both large and small amino acids in the hydrophobic core of the Fyn SH3 domain. Our results show that residues at three positions, which we designate as the 'core folding nucleus', are tightly packed in the transition state, and substitutions at these positions cause the largest changes in the folding rate. The other six positions examined appear to be loosely packed; thus, substitutions at these positions with larger hydrophobic residues generally accelerate folding, presumably by increasing the rate of nonspecific hydrophobic collapse. Surprisingly, the folding rate can be greatly accelerated by residues that also significantly destabilize the native state structure. Furthermore, mutants with identical thermodynamic stability can differ by up to 55-fold in their folding rates. These results highlight the importance of hydrophobic core composition, as opposed to only topology, in determining the folding rate of a protein. They also provide a new explanation for the 'abnormal' phi-values observed in many protein folding kinetics studies.     

Nucleation and the transition state of the SH3 domain

We present a verified computational model of the SH3 domain transition state (TS) ensemble. This model was built for three separate SH3 domains using experimental phi-values as structural constraints in all-atom protein folding simulations. While averaging over all conformations incorrectly considers non-TS conformations as transition states, quantifying structures as pre-TS, TS, and post-TS by measurement of their transmission coefficient ("probability to fold", or p(fold)) allows for rigorous conclusions regarding the structure of the folding nucleus and a full mechanistic analysis of the folding process. Through analysis of the TS, we observe a highly polarized nucleus in which many residues are solvent-exposed. Mechanistic analysis suggests the hydrophobic core forms largely after an early nucleation step. SH3 presents an ideal system for studying the nucleation-condensation mechanism and highlights the synergistic relationship between experiment and simulation in the study of protein folding.     

The folding transition state between SH3 domains is conformationally restricted and evolutionarily conserved.

The protein engineering analysis of the alpha-spectrin SH3 domain at three different stability conditions (pH 7.0, 3.5 and 2.5) reveals a folding transition state structured around the distal loop beta-hairpin and the 310-helix. This region is impervious to overall changes in protein stability, suggesting a transition state ensemble with little conformational variability. Comparison with the Src SH3 domain (36% sequence homology) indicates that the transition state in this protein family may be conserved. Discrepancies at some positions can be rationalized in terms of the different interactions made by the different side chains in both domains. Br?nsted plot analysis confirms the straight phi(doubledagger-U) results and shows two folding subdomains for this small protein. These results, together with previous data on circular permutants of the alpha-spectrin SH3 domain, indicate that polypeptide topology and chain connectivity play a major role in the folding reaction of this protein family.     

Multiple folding pathways of the SH3 domain

Experimental observations suggest that proteins follow different folding pathways under different environmental conditions. We perform molecular dynamics simulations of a model of the c-Crk SH3 domain over a broad range of temperatures, and identify distinct pathways in the folding transition. We determine the kinetic partition temperature-the temperature for which the c-Crk SH3 domain undergoes a rapid folding transition with minimal kinetic barriers-and observe that below this temperature the model protein may undergo a folding transition by multiple folding pathways via only one or two intermediates. Our findings suggest the hypothesis that the SH3 domain, a protein fold for which only two-state folding kinetics was observed in previous experiments, may exhibit intermediate states under conditions that strongly stabilize the native state.     

Characterization of the hydrodynamic properties of the folding transition state of an SH3 domain by magnetization transfer NMR spectroscopy

Protein folding kinetic data have been obtained for the marginally stable N-terminal Src homology 3 domain of the Drosophila protein drk (drkN SH3) in an investigation of the hydrodynamic properties of its folding transition state. Due to the presence of NMR resonances of both folded and unfolded states at equilibrium, kinetic data can be derived from NMR magnetization transfer techniques under equilibrium conditions. Kinetic analysis as a function of urea (less than approximately 1 M) and glycerol enables determination of alpha values, measures of the energetic sensitivity of the transition state to the perturbation relative to the end states of the protein folding reaction (the folded and unfolded states). Both end states have previously been studied experimentally by NMR spectroscopic and other biophysical methods in great detail and under nondenaturing conditions. Combining these results with the kinetic folding data obtained here, we can characterize the folding transition state without requiring empirical models for the unfolded state structure. We are thus able to give a reliable measure of the solvent-accessible surface area of the transition state of the drkN SH3 domain (4730 +/- 360 A(2)) based on urea titration data. Glycerol titration data give similar results and additionally demonstrate that folding of this SH3 domain is dependent on solvent viscosity, which is indicative of at least partial hydration of the transition state. Because SH3 domains appear to fold by a common folding mechanism, the data presented here provide valuable insight into the transition states of the drkN and other SH3 domains.     

Electrostatic interactions in the denatured state and in the transition state for protein folding: effects of denatured state interactions on the analysis of transition state structure

The development of electrostatic interactions during the folding of the N-terminal domain of the ribosomal protein L9 (NTL9) is investigated by pH-dependent rate equilibrium free energy relationships. We show that Asp8, among six acidic residues, is involved in non-native, electrostatic interactions with K12 in the transition state for folding as well as in the denatured state. The perturbed native state pK(a) of D8 (pK(a) = 3.0) appears to be maintained through non-native interactions in both the transition state and the denatured state. Mutational effects on the stability of the transition state for protein (un)folding are often analyzed in respect to change in ground states. Thus, the interpretation of transition state analysis critically depends on an understanding of mutational effects on both the native and denatured state. Increasing evidence for structurally biased denatured states under physiological conditions raises concerns about possible denatured state effects on folding studies. We show that the structural interpretation of transition state analysis can be altered dramatically by denatured state effects.     

The osmolyte trimethylamine‐N‐oxide stabilizes the Fyn SH3 domain without altering the structure of its folding transition state

Trimethylamine‐N‐oxide (TMAO) is a naturally occurring osmolyte that stabilizes proteins against denaturation. Although the impact of TMAO on the folding thermodynamics of many proteins has been well characterized, far fewer studies have investigated its effects on protein folding kinetics. In particular, no previous studies have used Φ‐value analysis to determine whether TMAO may alter the structure of the folding transition state. Here we have measured the effects on folding kinetics of 16 different amino acid substitutions distributed across the structure of the Fyn SH3 domain both in the presence and absence of TMAO. The folding and unfolding rates in TMAO, on average, improved to equivalent degrees, with a twofold increase in the protein folding rate accompanied by a twofold decrease in the unfolding rate. Importantly, TMAO caused little alteration to the Φ‐values of the mutants tested, implying that this compound minimally perturbs the folding transition state structure. Furthermore, the solvent accessibility of the transition state was not altered as reflected in an absence of a TMAO‐induced change in the denaturant β factors. Through TMAO‐induced folding studies, a β factor of 0.5 was calculated for this compound, suggesting that the protein backbone, which is the target of action of TMAO, is 50% exposed in the transition state as compared to the native state. This finding is consistent with the equivalent effects of TMAO on the folding and unfolding rates. Through thermodynamic analysis of mutants, we also discovered that the stabilizing effect of TMAO is lessened with increasing temperature.     

Protein folding kinetics beyond the phi value: using multiple amino acid substitutions to investigate the structure of the SH3 domain folding transition state

The SH3 domain folding transition state structure contains two well-ordered turn regions, known as the diverging turn and the distal loop. In the Src SH3 domain transition state, these regions are stabilized by a hydrogen bond between Glu30 in the diverging turn and Ser47 in the distal loop. We have examined the effects on folding kinetics of amino acid substitutions at the homologous positions (Glu24 and Ser41) in the Fyn SH3 domain. In contrast to most other folding kinetics studies which have focused primarily on non-disruptive substitutions with Ala or Gly, here we have examined the effects of substitutions with diverse amino acid residues. Using this approach, we demonstrate that the transition state structure is generally tolerant to amino acid substitutions. We also uncover a unique role for Ser at position 41 in facilitating folding of the distal loop, which can only be replicated by Asp at the same position. Both these residues appear to accelerate folding through the formation of short-range side-chain to backbone hydrogen bonds. The folding of the diverging turn region is shown to be driven primarily by local interactions. The diverging turn and distal loop regions are found to interact in the transition state structure, but only in the context of particular mutant backgrounds. This work demonstrates that studying the effects of a variety of amino acid substitutions on protein folding kinetics can provide unique insights into folding mechanisms which cannot be obtained by standard Phi value analysis.     

Parallel folding pathways in the SH3 domain protein

The transition-state ensemble (TSE) is the set of protein conformations with an equal probability to fold or unfold. Its characterization is crucial for an understanding of the folding process. We determined the TSE of the src-SH3 domain protein by using extensive molecular dynamics simulations of the Go model and computing the folding probability of a generated set of TSE candidate conformations. We found that the TSE possesses a well-defined hydrophobic core with variable enveloping structures resulting from the superposition of three parallel folding pathways. The most preferred pathway agrees with the experimentally determined TSE, while the two least preferred pathways differ significantly. The knowledge of the different pathways allows us to design the interactions between amino acids that guide the protein to fold through the least preferred pathway. This particular design is akin to a circular permutation of the protein. The finding motivates the hypothesis that the different experimentally observed TSEs in homologous proteins and circular permutants may represent potentially available pathways to the wild-type protein.     

Folding of spectrin's SH3 domain in the presence of spectrin repeats

The multifunctional protein spectrin contains several different structural motifs, such as spectrin repeats and a SH3 domain. Both triple-helix spectrin repeats and the SH3 domain are believed to form independent structural entities. In alpha-spectrins the SH3 domain is localized to repeat 9, where it is positioned between helix B and helix C in the repeat unit. The presence of SH3 in repeat 9 decreases the thermal stability considerably of this repeat unit while another insert in helix C does not seem to affect the stability. Addition of one or two adjacent repeat units increases the thermal stability from ca 25 degrees C to 41 and 48 degrees C, respectively. Despite the differences in thermal stability, the folding properties of peptides comprising the SH3 domain only or together with one or more repeats are more or less the same.     

Conserved patterns and interactions in the unfolding transition state across SH3 domain structural homologues

Proteins with similar structures are generally assumed to arise from similar sequences. However, there are more cases than not where this is not true. The dogma is that sequence determines structure; how, then, can very different sequences fold to the same structure? Here, we employ high temperature unfolding simulations to probe the pathways and specific interactions that direct the folding and unfolding of the SH3 domain. The SH3 metafold in the Dynameomics Database consists of 753 proteins with the same structure, but varied sequences and functions. To investigate the relationship between sequence and structure, we selected 17 targets from the SH3 metafold with high sequence variability. Six unfolding simulations were performed for each target, transition states were identified, revealing two general folding/unfolding pathways at the transition state. Transition states were also expressed as mathematical graphs of connected chemical nodes, and it was found that three positions within the structure, independent of sequence, were consistently more connected within the graph than any other nearby positions in the sequence. These positions represent a hub connecting different portions of the structure. Multiple sequence alignment and covariation analyses also revealed certain positions that were more conserved due to packing constraints and stabilizing long‐range contacts. This study demonstrates that members of the SH3 domain with different sequences can unfold through two main pathways, but certain characteristics are conserved regardless of the sequence or unfolding pathway. While sequence determines structure, we show that disparate sequences can provide similar interactions that influence folding and lead to similar structures.     

The structure of the plakin domain of plectin reveals a non-canonical SH3 domain interacting with its fourth spectrin repeat

Plectin belongs to the plakin family of cytoskeletal crosslinkers, which is part of the spectrin superfamily. Plakins contain an N-terminal conserved region, the plakin domain, which is formed by an array of spectrin repeats (SR) and a Src-homology 3 (SH3), and harbors binding sites for junctional proteins. We have combined x-ray crystallography and small angle x-ray scattering (SAXS) to elucidate the structure of the central region of the plakin domain of plectin, which corresponds to the SR3, SR4, SR5, and SH3 domains. The crystal structures of the SR3-SR4 and SR4-SR5-SH3 fragments were determined to 2.2 and 2.95 Å resolution, respectively. The SH3 of plectin presents major alterations as compared with canonical Pro-rich binding SH3 domains, suggesting that plectin does not recognize Pro-rich motifs. In addition, the SH3 binding site is partially occluded by an intramolecular contact with the SR4. Residues of this pseudo-binding site and the SR4/SH3 interface are conserved within the plakin family, suggesting that the structure of this part of the plectin molecule is similar to that of other plakins. We have created a model for the SR3-SR4-SR5-SH3 region, which agrees well with SAXS data in solution. The three SRs form a semi-flexible rod that is not altered by the presence of the SH3 domain, and it is similar to those found in spectrins. The flexibility of the plakin domain, in analogy with spectrins, might contribute to the role of plakins in maintaining the stability of tissues subject to mechanical stress.     

Analysis of the pH-dependent folding and stability of histidine point mutants allows characterization of the denatured state and transition state for protein folding

pH-Dependent studies of the folding kinetics and stability of a set of His to Gln point mutants were used to characterize the denatured state and transition state ensembles for the C-terminal domain of the ribosomal protein L9 (CTL9). CTL9 contains three histidine residues, two of which, H106 and H134, are buried in the native state, while the third, H144, is more exposed. Comparison of the pH-dependent stability calculated using the Tanford-Wyman linkage relationship to the measured values demonstrates that the apparent pK(a) values of the three histidine residues are not significantly perturbed in the denatured state ensemble. Kinetic measurements show that mutation of H134 has a larger effect on the folding process than does mutation of H106 and H144. The Phi-value for H134 is significantly larger than the Phi-values for the other histidine residues, which are near zero at both pH 5.45 and pH 8.0. The Phi-value for H134 is higher, 0.55, at pH 8.0 than at pH 5.45, 0.39. At pH 5.45, H134 is protonated in the unfolded state but deprotonated in the native state, while at pH 8.0 it is deprotonated in both. There is an excellent linear relationship between stability (logK) and folding rates (logk(f)) over the range of pH 5-9 for all mutants. From these plots, the ratio of DeltaQ( not equal)/DeltaQ can be calculated for each mutant. DeltaQ( not equal) is the difference in the number of protons bound to the transition state and to the unfolded state, while DeltaQ represents the difference between folded and denatured state. The linear plots indicate that the relative position of the transition state ensemble as judged by DeltaQ( not equal)/DeltaQ is independent of pH. The linkage analysis is consistent with the Phi-value analysis, showing that H134 is the most critical contributor to the development of pH-dependent interactions, including desolvation effects in the transition state ensemble.     

Stability and folding of the SH3 domain of bruton's tyrosine kinase

Bruton's tyrosine kinase (BTK) plays an important role in B cell development. Deletion of C-terminal 14 amino acids of the SH3 domain of BTK results in X-linked agammaglobulinemia (XLA), an inherited disease. We report here on the stability and folding of SH3 domain of BTK. Peptides corresponding to residues 216–273 (58 residues) and 216–259 (44 residues) of BTK SH3 domain were synthesized by solid phase methods; the first peptide constitutes the entire SH3 domain of BTK while the latter peptide lacks 14 amino acid residues of the C-terminal. The 58 amino acid peptide forms mainly a β-barrel type folding unit. Although small and lacking disulfide bonds, this peptide is extremely stable to thermal denaturation. Based on circular dichroism measurements, its melting temperature was found to be high, 82°C at pH 6.0. However, the Gibbs free energy (ΔG) of the intrinsic stability and thermodynamic spontaneity of unfolding were found to be low, 2.6 kcal/mol by Gdn·HCl denaturation experiments, as compared to 12 kcal/mol obtained for larger single domain proteins, indicating poor stability of SH3 domain. Addition of 500 mM of Na₂SO₄ increased the free energy change ΔG to 4.0 kcal/mol, suggesting an ionic strength effect. The truncated peptide fails to fold correctly and adopts random coil conformation in contrast to 58 amino acid β-barrel peptide, which exhibits high thermal stability but normal or low stability at ambient temperature. These results, to our knowledge the first to delineate the importance of C-terminal in structural integrity of SH3 domains, indicate also that improper folding and/or poor stability of mutant SH3 domain in BTK likely causes XLA. Proteins 28:465–471 © 1996 Wiley-Liss, Inc.     

Cotranslational, cosecretory protein folding and its renaturation from a denatured state

On the basis of the available experimental data on structure, biosynthesis and secretion of globular proteins it is concluded that an alpha-helix is a starting conformation at formation of the native structure of any globular protein (alpha-helical model for initiation of protein folding). The structural invariant (clusterization of hydrophobic side chains on the alpha-helix surface) in the amino acid sequences of globular proteins is found which is predicted by alpha-helical model for the initiation of protein folding. The model predicts the pyramidization of the atoms C and N of peptide groups during the formation of spatial structure of proteins and a number of other effects that can be put to the experimental test. In the work the mechanism for protein translocation across membrane lipid bilayer is also suggested.     

Four-state folding of a SH3 domain: salt-induced modulation of the stabilities of the intermediates and native state

Unstable intermediates on the folding pathways of proteins can be stabilized sufficiently so that they accumulate to detectable extents by the addition of a suitable cosolute. Here, the effect of sodium sulfate (Na(2)SO(4)) on the folding of the SH3 domain of PI3 kinase was investigated in the presence of guanidine hydrochloride (GdnHCl) using intrinsic tyrosine fluorescence and 1-anilinonaphthalene-8-sulfonate (ANS) binding. The free energy of unfolding in water of the native state (N) increases linearly with Na(2)SO(4) concentration, indicating stabilization via the Hofmeister effect. The addition of 0.5 M Na(2)SO(4) causes accumulation of an early intermediate L, which manifests itself as (1) a sub-millisecond change in tyrosine and ANS fluorescence and (2) a curvature in the chevron plot. It is shown that L is a specific structural component of the initially collapsed ensemble. An intermediate, M, also accumulates in unfolding studies conducted in the presence of 0.5 M Na(2)SO(4) and manifests itself by causing a curvature in the unfolding arm of the chevron. M is shown to be a wet molten globule that binds to ANS under unfolding conditions and is stabilized to the same extent as N in the presence of Na(2)SO(4). A four-state U ? L ? M ? N scheme satisfactorily modeled the kinetic data. Thus, the folding of the PI3K SH3 domain in the presence of salt commences via the formation of a structured intermediate ensemble L, which accumulates before the rate-limiting step of folding. L subsequently proceeds to N via the late intermediate M that forms after the rate-limiting transition of folding.     

Design and structural thermodynamic studies of the chimeric protein derived from spectrin SH3 domain

A number of the chimeric constructs with spectrin SH3 domain were designed for structural and thermodynamic studies of protein self-assembly and protein-ligand interactions. SH3 domains, components of many regulatory proteins, operate through weak interactions with proline-rich regions of polypeptide chains. The recombinant construct (WT-CIIA) studied in this work was constructed by linking the peptide ligand PPPVPPYSAG to the domain C-terminus via a long 12-residue linker to increase the affinity of this ligand for the spectrin domain, thereby ensuring a stable positioning of the polyproline helix to the conserved ligand-binding site in orientation II, which is regarded as untypical of the interaction between this domain and oligopeptides. A comparison of fluorescence spectra of the initial domain and the recombinant protein WT-CIIA suggests that the ligand sticks to the conservative binding site. However, analysis of the equilibrium urea-induced unfolding has demonstrated that this is an unstable contact, which leads to a two-stage unfolding of the chimeric protein. The protein WT-CIIA was crystallized; a set of X-ray diffraction data with a resolution of 1.75 Å was recorded from individual crystals. A preliminary analysis of these diffraction data has demonstrated that the crystals belong to space group P32 with the following unit cell parameters: a = b = 36.39, c = 112.17 Å, a = β = 90.0, and γ = 120.0.     

High-resolution crystal structure of spectrin SH3 domain fused with a proline-rich peptide

A new chimeric protein, named WT-CIIA, was designed by connecting the proline-rich decapeptide PPPVPPYSAG to the C-terminus of the alpha-spectrin SH3 domain through a natural twelve-residue linker to obtain a single-chain model that would imitate intramolecular SH3-ligand interaction. The crystal structure of this fusion protein was determined at 1.7 ? resolution. The asymmetric unit of the crystal contained two SH3 globules contacting with one PPPVPPY fragment located between them. The domains are related by the two-fold non-crystallographic axis and the ligand lies in two opposite orientations with respect to the conservative binding sites of SH3 domains.     

Native state energetics of the Src SH2 domain: evidence for a partially structured state in the denatured ensemble

We have defined the free-energy profile of the Src SH2 domain using a variety of biophysical techniques. Equilibrium and kinetic experiments monitored by tryptophan fluorescence show that Src SH2 is quite stable and folds rapidly by a two-state mechanism, without populating any intermediates. Native state hydrogen-deuterium exchange confirms this two-state behavior; we detect no cooperative partially unfolded forms in equilibrium with the native conformation under any conditions. Interestingly, the apparent stability of the protein from hydrogen exchange is 2 kcal/mol greater than the stability determined by both equilibrium and kinetic studies followed by fluorescence. Native-state proteolysis demonstrates that this "super protection" does not result from a deviation from the linear extrapolation model used to fit the fluorescence data. Instead, it likely arises from a notable compaction in the unfolded state under native conditions, resulting in an ensemble of conformations with substantial solvent exposure of side chains and flexible regions sensitive to proteolysis, but backbone amides that exchange with solvent approximately 30-fold slower than would be expected for a random coil. The apparently simple behavior of Src SH2 in traditional unfolding studies masks the significant complexity present in the denatured-state ensemble.