High level extracellular production of a truncated alkaline β-mannanase from alkaliphilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. N16-5 in <Emphasis Type="Italic">Escherichia coli</Emphasis> by the optimization of induction condition and fed-batch fermentation

To improve the extracellular production of alkaline β-mannanase from alkaliphilic Bacillus sp. N16-5 in Escherichia coli, two truncated recombinant mannanases (32a-ManAR2 and 22b-ManAR2) were obtained. Compared with the full-length mannanases (32a-ManAR1 and 22b-ManAR1), the truncated mannanases not only showed higher secretion rate, but also exhibited higher thermostability and alkalistability. The K _m value (11 mg/mL) of 32a-ManAR2 was higher than that (1.46 mg/mL) of 32a-ManAR1. The specific activity of 22b-ManAR2 was 2.7 times higher than that of 22b-ManAR1. 22b-ManAR2 showed the highest k _cat/K _m value of 602.7 ml/mg s. The parameters of induction for recombinant mannanase production of E. coli BL21 (pET32a-manAR2) and E. coli BL21 (pET22b-manAR2) were subsequently optimized. The yield of soluble mannanase was found to be enhanced with lower induction temperature (25 °C), lower IPTG concentration (0.01–0.05 mM), and Triton X-100 supplement (0.1 %) in a shake flask. Moreover, a one-time feeding strategy and Triton X-100 supplement were applied in production of 22b-ManAR2 in a 10 L fermentor. The productivity of the total soluble mannanase reached 9284.64 U/mL with the extracellular rate of 74 % at 46 h of fermentation, which was the highest productive level of alkaline β-mannanase in recombinant E. coli to date.     

Molecular cloning and expression of ranalexin, a bioactive antimicrobial peptide from Rana catesbeiana in Escherichia coli and assessments of its biological activities

The coding sequence, which corresponds to the mature antimicrobial peptide ranalexin from the frog Rana catesbeiana, was chemically synthesized with preferred codons for expression in Escherichia coli. It was cloned into the vector pET32c (+) to express a thioredoxin-ranalexin fusion protein which was produced in soluble form in E. coli BL21 (DE3) induced under optimized conditions. After two purification steps through affinity chromatography, about 1 mg of the recombinant ranalexin was obtained from 1 L of culture. Mass spectrometrical analysis of the purified recombinant ranalexin demonstrated its identity with ranalexin. The purified recombinant ranalexin is biologically active. It showed antibacterial activities similar to those of the native peptide against Staphylococcus aureus, Streptococcus pyogenes, E. coli, and multidrug-resistant strains of S. aureus with minimum inhibitory concentration values between 8 and 128 μg/ml. The recombinant ranalexin is also cytotoxic in HeLa and COS7 human cancer cells (IC₅₀?=?13–15 μg/ml).     

High-efficiency production of bioactive recombinant human fibroblast growth factor 18 in Escherichia coli and its effects on hair follicle growth

Using fusion tags, expression of recombinant human fibroblast growth factor 18 (rhFGF18) in mammalian cells and Escherichia coli has been extensively used for fundamental research and clinical applications, including chondrogenesis and osteogenesis, hair growth, and neuroprotection. However, high-level rhFGF18 expression is difficult and the products are often not homogeneous. Furthermore, fusion-tagged protein has higher immunogenicity and lower bioactivity, and the removal of the fused tag is expensive. To overcome the limitations of fusion-tagged expression of protein and to prepare soluble highly bioactive rhFGF18, we have developed a rapid and efficient expression strategy. Optimized hFGF18 gene was amplified by polymerase chain reaction and cloned into pET22b and pET3c vectors, then transformed into E. coli strains Origima (DE3) and BL21 (DE3)PlysS. The best combination of plasmid and host strain was selected, and only Origima (DE3)/pET3c-rhFGF18 was screened for high-level expressed rhFGF18. Under optimal conditions in a 30-L fermentor, the average bacterial yield and expression level of rhFGF18 of three batches were more than 652 g and 30 % respectively, after treatment with 1 mM isopropyl-thio-β-galactopyranoside for 10 h at 25 °C. The target protein was purified by CM Sepharose FF and heparin affinity chromatography. The purity of rhFGF18 was shown by HPLC to be higher than 95 %, and the yield was 155 mg/L. In vitro MTT assays demonstrated that the purified rhFGF18 could stimulate significant proliferation of NIH3T3 cells, and animal experiments showed that rhFGF18 could effectively regulate hair growth. In conclusion, this may be a better method of producing rhFGF18 to meet the increasing demand in its pharmacological application.     

Oxidative decarboxylation of mandelic acid derivative by recombinant Escherichia coli: a novel method of ethyl vanillin synthesis

The benzoylformate decarboxylase gene (mdlC) from Pseudomonas putida was expressed in Escherichia coli BL21(DE3). The recombinant strain together with E. coli/pET30a-mdlB converted (S)-3-ethoxy-4-hydroxymandelic acid (S-EMA) into ethyl vanillin without ethyl vanillin degradation. 4 g ethyl vanillin/l was obtained from 10 g EMA/l within 12 h at 30 °C. This is the first report on the biotransformation of (S)-EMA to ethyl vanillin.     

Characterization of two copper/zinc superoxide dismutases (Cu/Zn-SODs) from the desert beetle Microdera punctipennis and their activities in protecting E. coli cells against cold

Superoxide dismutases (SODs) are crucial in scavenging reactive oxygen species (ROS); however, studies regarding SOD functions in insects under cold conditions are rare. In this paper, two novel Cu/Zn-SOD genes in the desert beetle Microdera punctipennis, an extracellular copper/zinc SOD (MpecCu/Zn-SOD) and an intracellular copper/zinc SOD (MpicCu/Zn-SOD), were identified and characterized. The results of quantitative real-time PCR showed that MpecCu/Zn-SOD expression was significantly up-regulated by 4 °C exposure for 0.5 h, but MpicCu/Zn-SOD was not. Superoxide anion radical (O₂•^-) content in beetles under 4 °C exposure for 0.5 h showed an initial sharp increase and fluctuated during the cold treatment period, which was consistent with the relative mRNA level of MpecCu/Zn-SOD. The total SOD activity in the beetle was negatively correlated to the O₂•^- content with a correlation coefficient of −0.437. An E. coli system was employed to study the function of each MpCu/Zn-SOD gene. The fusion proteins Trx-His-MpCu/Zn-SODs were over expressed in E. coli BL21 using pET32a vector, and identified by SDS-PAGE and Western blotting. The transformed bacteria BL21(pET32a-MpecCu/Zn-SOD) and BL21(pET32a-MpicCu/Zn-SOD) showed increased cold tolerance to −4 °C as well as increased SOD activity compared to the control BL21(pET32a). The relative conductivity and malondialdehyde content in the two MpCu/Zn-SODs transformed bacteria under −4 °C were significantly lower than the control BL21(pET32a). Furthermore, BL21(pET32a-MpecCu/Zn-SOD) had significantly higher SOD activity and cold tolerance than BL21(pET32a-MpicCu/Zn-SOD) under −4 °C treatment, and had lower conductivity than BL21(pET32a-MpicCu/Zn-SOD). In conclusion, low temperature led to the accumulation of O₂•^- in M. punctipennis, which stimulated the expression of extracellular MpCu/Zn-SOD gene and the increase of total SOD activity. E. coli overexpressing Trx-His-MpCu/Zn-SODs increased resistance to cold treatment-induced oxidative stress. Our findings will be helpful in further study of Cu/Zn-SOD genes in insect cold-tolerance.     

Production of γ-aminobutyric acid in Escherichia coli by engineering MSG pathway

Abstract

The compound γ-aminobutyric acid (GABA) has many important physiological functions. The effect of glutamate decarboxylases and the glutamate/GABA antiporter on GABA production was investigated in Escherichia coli. Three genes, gadA, gadB, and gadC were cloned and ligated alone or in combination into the plasmid pET32a. The constructed plasmids were transformed into Escherichia coli BL21(DE3). Three strains, E. coli BL21(DE3)/pET32a-gadA, E. coli BL21(DE3)/pET32a-gadAB and E. coli BL21(DE3)/pET32a-gadABC were selected and identified. The respective titers of GABA from the three strains grown in shake flasks were 1.25, 2.31, and 3.98?g/L. The optimal titer of the substrate and the optimal pH for GABA production were 40?g/L and 4.2, respectively. The highest titer of GABA was 23.6?g/L at 36?h in batch fermentation and was 31.3?g/L at 57?h in fed-batch fermentation. This study lays a foundation for the development and use of GABA.     

Expression of a keratinase (kerA) gene from Bacillus licheniformis in Escherichia coli and characterization of the recombinant enzymes

The gene kerA (1,047 bp) encoding the main keratinase from Bacillus licheniformis was cloned into two conventional vectors, pET30α and pET32α, and expressed in Escherichia coli. From SDS-PAGE analysis, the recombinant keratinases were 45 and 55 kDa. They had different optimal pH values (7.5 and 8.5) but the same optimum temperature of 50 °C. The recombinant keratinase produced in E. coli pET30α-kerA was more stable than that produced in E. coli pET32α-kerA, and retained approx. 70 % of its total enzyme activity after 30 min at 70 °C.     

Production of 3-O-xylosyl quercetin in Escherichia coli

Quercetin, a flavonol aglycone, is one of the most abundant flavonoids with high medicinal value. The bioavailability and pharmacokinetic properties of quercetin are influenced by the type of sugars attached to the molecule. To efficiently diversify the therapeutic uses of quercetin, Escherichia coli was harnessed as a production factory by the installation of various plant and bacterial UDP-xylose sugar biosynthetic genes. The genes encoding for the UDP-xylose pathway enzymes phosphoglucomutase (nfa44530), glucose-1-phosphate uridylyltransferase (galU), UDP-glucose dehydrogenase (calS8), and UDP-glucuronic acid decarboxylase (calS9) were overexpressed in E. coli BL21 (DE3) along with a glycosyltransferase (arGt-3) from Arabidopsis thaliana. Furthermore, E. coli BL21(DE3)/?pgi, E. coli BL21(DE3)/?zwf, E. coli BL21(DE3)/?pgi?zwf, and E. coli BL21(DE3)/?pgi?zwf?ushA mutants carrying the aforementioned UDP-xylose sugar biosynthetic genes and glycosyltransferase and the galU-integrated E. coli BL21(DE3)/?pgi host harboring only calS8, calS9, and arGt-3 were constructed to enhance whole-cell bioconversion of exogeneously supplied quercetin into 3-O-xylosyl quercetin. Here, we report the highest production of 3-O-xylosyl quercetin with E. coli BL21 (DE3)/?pgi?zwf?ushA carrying UDP-xylose sugar biosynthetic genes and glycosyltransferase. The maximum concentration of 3-O-xylosyl quercetin achieved was 23.78 mg/L (54.75 μM), representing 54.75 % bioconversion, which was an ~4.8-fold higher bioconversion than that shown by E. coli BL21 (DE3) with the same set of genes when the reaction was carried out in 5-mL culture tubes with 100 μM quercetin under optimized conditions. Bioconversion was further improved by 98 % when the reaction was scaled up in a 3-L fermentor at 36 h.     

Construction and Application of Strains that Constitutively Express the Arginase I Gene

Suicide vectors typically contain an ori that can replicate only under specific conditions. The suicide plasmid pRE112 has a conditional R6K ori, requiring the π protein. As the Escherichia coli DH5α cells cannot secrete the π protein and this plasmid can survive only by integrating into the genome. In our study, insertion mutants were constructed using a method based on the suicide plasmid pRE112. After constructing a recombinant suicide plasmid pRE112 that included the arginase I gene, the vector was transformed into E. coli DH5α cells, producing the strain that constitutively expressed the arginase I gene. The E. coli strains were screened to determine the highest enzyme activity levels. Comparison of arginase I-induced expressed strains BL21/pET21a-ARG and BL21/pET35b-ARG constructed by our laboratory with the constitutively expressed strain did not reveal any significant differences in enzyme activity levels. The conversion efficiency of L-Arg was 97.8% under the optimum conditions (60°C, pH 9.5, 1 mM of Mn²⁺, 100 mg/g of wet cell weight, 3% L-Arg and 1 h of reaction time). After purification with macroreticular cation exchange resin 001×7, the purity of obtained L-Orn was 98.7%. Compared with induced expression, constitutive expression has improved economic benefits, convenience, stability and simplicity in preparation, thus overcoming the processing defects that lose plasmids. This approach may improve benefits in preserving the cultures in industrial production processes.     

Cold-Adapted RTX Lipase from Antarctic Pseudomonas sp. Strain AMS8: Isolation, Molecular Modeling and Heterologous Expression

A new strain of psychrophilic bacteria (designated strain AMS8) from Antarctic soil was screened for extracellular lipolytic activity and further analyzed using molecular approach. Analysis of 16S rDNA showed that strain AMS8 was similar to Pseudomonas sp. A lipase gene named lipAMS8 was successfully isolated from strain AMS8, cloned, sequenced and overexpressed in Escherichia coli. Sequence analysis revealed that lipAMS8 consist of 1,431 bp nucleotides that encoded a polypeptide consisting of 476 amino acids. It lacked an N-terminal signal peptide and contained a glycine- and aspartate-rich nonapeptide sequence at the C-terminus, which are known to be the characteristics of repeats-in-toxin bacterial lipases. Furthermore, the substrate binding site of lipAMS8 was identified as S²⁰⁷, D²⁵⁵ and H³¹³, based on homology modeling and multiple sequence alignment. Crude lipase exhibited maximum activity at 20 °C and retained almost 50 % of its activity at 10 °C. The molecular weight of lipAMS8 was estimated to be 50 kDa via sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The optimal expression level was attained using the recombinant plasmid pET32b/BL21(DE3) expressed at 15 °C for 8 h, induced by 0.1 mM isopropyl β-D thiogalactoside (IPTG) at E. coli growth optimal density of 0.5.     

Cloning, Expression, and Characterization of an GHF 11 Xylanase from Aspergillus niger XZ-3S

A xylanase gene (xynZF-2) from the Aspergillus niger XZ-3S was cloned and expressed in Escherichia coli. The coding region of the gene was separated by only one intron with the 68 bp in length. It encoded 225 amino acid residues of a protein with a calculated molecular weight of 24.04 kDa plus a signal peptide of 18 amino acids. The amino acid sequence of the xynZF-2 gene had a high similarity with those of family 11 of glycosyl hydrolases reported from other microorganisms. The mature peptide encoding cDNA was subcloned into pET-28a(+) expression vector. The resultant recombinant plasmid pET-28a-xynZF-2 was transformed into E. coli BL21(DE3), and finally the recombinant strain BL21/xynZF-2 was obtained. A maximum activity of 42.33 U/mg was gained from cellular of E. coli BL21/xynZF-2 induced by IPTG. The optimum temperature and pH for recombinant enzyme which has a good stability in alkaline conditions were 40 °C and 5.0, respectively. Fe³⁺ had an active effect on the enzyme obviously.     

Biotransformation of the antitumor intermediate 5-fluorouridine by recombinant Escherichia coli with high pyrimidine nucleoside phosporylase activity

Abstract

5-Fluorouridine (5-FUrd) is a precursor of the widely used antitumor drug doxifluridine. We have produced 5-FUrd by biotransformation by cloning the gene encoding pyrimidine nucleoside phosphorylase (PyNPase) from Enterobacter aero-genes CMCC (B) 45103 and expression in Escherichia coli BL21 (DE3), resulting in recombinant E. coli BL21 (DE3)/ pET28a-PyNPase. After medium optimization, the PyNPase activity in the fermentation broth was 1613 U mg^–1, which was 54-fold that of E. aerogenes. Under optimal conditions (cell concentration, 0.5 g L^–1; uridine, 10 mM; 5-fluorouracil, 45 mM; temperature, 50°C; pH, 7.8), more than 90% of uridine was converted to 5-FUrd, suggesting that this is a valuable tool for application in the preparation of antiviral and antitumor drugs.     

Production of uroporphyrinogen III, which is the common precursor of all tetrapyrrole cofactors, from 5-aminolevulinic acid by Escherichia coli expressing thermostable enzymes

Uroporphyrinogen III (urogen III) was produced from 5-aminolevulinic acid (ALA), which is a common precursor of all metabolic tetrapyrroles, using thermostable ALA dehydratase (ALAD), porphobilinogen deaminase (PBGD), and urogen III synthase (UROS) of Thermus thermophilus HB8. The UROS-coding gene (hemD ₂ ) of T. thermophilus HB8 was identified by examining the gene product for its ability to produce urogen III in a coupled reaction with ALAD and PBGD. The genes encoding ALAD, PBGD, and UROS were separately expressed in Escherichia coli BL21 (DE3). To inactivate indigenous mesophilic enzymes, the E. coli transformants were heated at 70 °C for 10 min. The bioconversion of ALA to urogen III was performed using a mixture of heat-treated E. coli transformants expressing ALAD, PBGD, and UROS at a cell ratio of 1:1:1. When the total cell concentration was 7.5 g/l, the mixture of heat-treated E. coli transformants could convert about 88 % 10 mM ALA to urogen III at 60 °C after 4 h. Since eight ALA molecules are required for the synthesis of one porphyrin molecule, approximately 1.1 mM (990 mg/l) urogen III was produced from 10 mM ALA. The present technology has great potential to supply urogen III for the biocatalytic production of vitamin B₁₂.     

Characterization of a glutamate decarboxylase (GAD) gene from Lactobacillus zymae

Lactic acid bacteria (LAB) were isolated from Kimchi, a Korean traditional fermented vegetable food. LAB accumulating GABA (γ-aminobutyric acid) in the culture media were screened by TLC analysis. One isolate, GU240, produced the highest amount of GABA among the 3,000 isolates and identified as a Lactobacillus zymae strain. Glutamate decarboxylase (GAD) gene was cloned and over-expressed in E. coli BL21(DE3) using pET26b(+). The recombinant GAD was purified by using a Ni–NTA column. Its size was 53 kDa by SDS-PAGE. Maximum GAD activity was at pH 4.5 and 41 °C and the activity was dependent on pyridoxal 5′-phosphate. K_m and V_max of LzGAD were 1.7 mM and 0.01 mM/min, respectively, when glutamate was used as a substrate.     

Cloning,Expression and Characterization of a Lipase Encoding Gene from Human Oral Metagenome

The human oral metagenomic DNA cloned into plasmid pUC19 was used to construct a DNA library in Escherichia coli. Functional screening of 40,000 metagenomic clones led to identification of a clone LIP2 that exhibited halo on tributyrin agar plate. Sequence analysis of LIP2 insert DNA revealed a 939 bp ORF (omlip1) which showed homology to lipase 1 of Acinetobacter junii SH205. The omlip1 ORF was cloned and expressed in E. coli BL21 (DE3) using pET expression system. The recombinant enzyme was purified to homogeneity and the biochemical properties were studied. The purified OMLip1 hydrolyzed p-nitrophenyl esters and triacylglycerol esters of medium and long chain fatty acids, indicating the enzyme is a true lipase. The purified protein exhibited a pH and temperature optima of 7 and 37 °C respectively. The lipase was found to be stable at pH range of 6–7 and at temperatures lower than 40 °C. Importantly, the enzyme activity was unaltered, by the presence or absence of many divalent cations. The metal ion insensitivity of OMLip1offers its potential use in industrial processes.     

Overexpression,purification, molecular characterization and the effect on tumor growth of ribosomal protein L22 from the Giant Panda (Ailuropoda melanoleuca)

The ribosomal protein L22 (RPL22) protein belongs to the L22E family of ribosomal proteins. It is located in the cytoplasm. The purpose of this paper was to explore the structure and anti-cancer function of RPL22 of the Giant Panda (Ailuropoda melanoleuca). The cDNA of RPL22 was cloned successfully from the Giant Panda using RT-PCR technology. We constructed a recombinant expression vector containing RPL22 cDNA and over-expressed it in Escherichia coli using pET28a plasmids. The expression product obtained was purified by using Ni chelating affinity chromatography. The result indicated that the length of the fragment cloned is 414 bp, and it contains an open-reading frame of 387 bp encoding 128 amino acids. Primary structure analysis revealed that the molecular weight of the putative RPL22 protein is 14.74 kDa with a theoretical pI 9.21. The RPL22 gene can be really expressed in E. coli and the RPL22 protein, fusioned with the N-terminally His-tagged protein, gave rise to the accumulation of an expected 20.1 kDa polypeptide. The data showed that the recombinant protein RPL22 had a time- and dose-dependency on the cell growth inhibition rate. The human laryngeal carcinoma Hep-2 cells treated with 0.05–6 μg/ml of RPL22 for 24 h displayed significant cell growth inhibition (p < 0.05, n = 8) in assayed using MTT compared to the control (untreated) cells. The data indicate that the effect at low concentrations is better than high concentrations, and the concentration of 1.5 μg/ml has the best rate of growth inhibition of 47.70 %. The inhibitory rate in mice treated with 1.5 μg/ml RPL22 protein can reach 43.75 %. Histology of tumor organs shows that the tissues arranged looser in RPL22 group than those in control group. Meanwhile, there is no obvious damage to other organs, such as heart, lung and kidney. Further research is on going to determine the bioactive principle(s) of recombinant protein RPL22 responsible for its anticancer activity.     

Bioresolution of racemic phenyl glycidyl ether by a putative recombinant epoxide hydrolase from <Emphasis Type="Italic">Streptomyces griseus</Emphasis> NBRC 13350

In order to produce enantiomerically pure epoxides for the synthesis of value-added chemicals, a novel putative epoxide hydrolase (EH) sgeh was cloned and overexpressed in pET28a/Escherichia coli BL21(DE3). The 1047 bp sgeh gene was mined from Streptomyces griseus NBRC 13350 genome sequence. The recombinant hexahistidyl-tagged SGEH was purified (16.6-fold) by immobilized metal-affinity chromatography, with 90% yield as a homodimer of 100 kDa. The recombinant E. coli whole cells overexpressing SGEH could kinetically resolve racemic phenyl glycidyl ether (PGE) into (R)-PGE with 98% ee, 40% yield, and enantiomeric ratio (E) of 20. This was achieved under the optimized reaction conditions i.e. cell/substrate ratio of 20:1 (w/w) at pH 7.5 and 20?°C in 10% (v/v) dimethylformamide (DMF) in a 10 h reaction. 99% enantiopure (R)-PGE was obtained when the reaction time was prolonged to 12 h with a yield of 34%. In conclusion, an economically viable and environment friendly green process for the production of enantiopure (R)-PGE was developed by using wet cells of E. coli expressing recombinant SGEH.     

Cloning and expression of a full-length glutamate decarboxylase gene from a high-yielding γ-aminobutyric acid yeast strain MJ2

A yeast strain MJ2 that was found to produce a higher amount of γ-aminobutyric acid (GABA) was isolated from the surface of kiwi. Phylogenetic analysis based on the ITS sequence and morphological, biochemical studies indicated that it may belong to Saccharomyces cerevisiae. Under optimum conditions in Czapek’s broth medium with 0.5 % monosodium glutamate, it produced GABA at a concentration of 5.823 g/L after 48 h. A full-length glutamate decarboxylase gene (Scgad) was cloned by PCR amplification. The open reading frame (ORF) of the Scgad gene was composed of 1,755 nucleotides and encoded a protein (585 amino acids) with a predicted molecular weight of 65.897 kDa. The deduced amino acids sequence of Scgad shows 100 %, 65 % and 62 % similarity with S. cerevisiae, Candida glabrata and Kluyveromyces lactis GAD in the polypeptide level, respectively. The Scgad gene was expressed in Escherichia coli BL21 (DE3) cells, and the expression was confirmed by Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE) analysis. The results suggested that the S. cerevisiae GAD (ScGAD) was successfully encoded in E. coli BL21 (DE3) cells. Furthermore, the enzyme activity of ScGAD encoded in E. coli BL21 (DE3) had been significantly enhanced using artificial neural network linked with genetic algorithm (ANN-GA) method.     

Production of 3-hydroxypropionic acid from glycerol by acid tolerant Escherichia coli

The biological production of 3-hydroxypropionic acid (3-HP) has attracted significant attention because of its industrial importance. The low titer, yield and productivity, all of which are related directly or indirectly to the toxicity of 3-HP, have limited the commercial production of 3-HP. The aim of this study was to identify and select a 3-HP tolerant Escherichia coli strain among nine strains reported to produce various organic acids efficiently at high titer. When transformed with heterologous glycerol dehydratase, reactivase and aldehyde dehydrogenase, all nine E. coli strains produced 3-HP from glycerol but the level of 3-HP production, protein expression and activities of the important enzymes differed significantly according to the strain. Two E. coli strains, W3110 and W, showed higher levels of growth than the others in the presence of 25 g/L 3-HP. In the glycerol fed-batch bioreactor experiments, the recombinant E. coli W produced a high level of 3-HP at 460 ± 10 mM (41.5 ± 1.1 g/L) in 48 h with a yield of 31 % and a productivity of 0.86 ± 0.05 g/L h. In contrast, the recombinant E. coli W3110 produced only 180 ± 8.5 mM 3-HP (15.3 ± 0.8 g/L) in 48 h with a yield and productivity of 26 % and 0.36 ± 0.02 g/L h, respectively. This shows that the tolerance to and the production of 3-HP differ significantly among the well-known, similar strains of E. coli. The titer and productivity obtained with E. coli W were the highest reported thus far for the biological production of 3-HP from glycerol by E. coli.