Lactococcal plasmid pWV01 as an integration vector for lactococci.

A Bacillus subtilis strain was constructed that contained the repA gene of the lactococcal plasmid pWVO1 in its chromosome. This strain was used to construct the pWVO1-based integration vector pINT1, which lacked the repA gene. The 3.6-kb plasmid pINT1 was not able to replicate in Lactococcus lactis MG1363 but integrated into the chromosome via a Campbell-like mechanism when a lactococcal chromosomal DNA fragment was incorporated in the plasmid. Transformants were obtained that carried between one and four plasmid copies, in stable tandem arrangement on the chromosome. The results indicate that pWVO1 can be used for the development of a Campbell-like integration system fully derived of lactococcal DNA, with which stable multiple copies of any gene of interest can be generated in the lactococcal chromosome.     

Campbell-like integration of heterologous plasmid DNA into the chromosome of Lactococcus lactis subsp. lactis

Integrable vectors were constructed based on the plasmid pHV60, which is essentially a pBR322 replicon carrying a chloramphenicol resistance marker, by inserting 1.3-kilobase chromosomal fragments of Lactococcus lactis subsp. lactis MG1363 into this plasmid. Three constructs as well as pHV60 were electroporated to strain MG1363. Transformants were obtained with all constructs, and also with pHV60 (albeit with low frequency). By using Southern hybridizations, it appeared that pHV60 showed homology with the chromosome of MG1363, and that it most probably uses this homology to integrate in a Campbell-like manner. The presence of chromosomal sequences in pHV60 stimulated insertion elsewhere in the chromosome by a factor of 5 to 100. In all cases the integrated plasmids were amplified, at a selective pressure of 5 micrograms of chloramphenicol per ml, to a level of approximately 15 copies per chromosome. Although the amplification was gradually lost under nonselective conditions, one copy remained stably integrated in the chromosome. The results show that a Campbell-like integration strategy can be used to improve the accessibility of the lactococcal chromosome for genetic analysis and is potentially useful in stabilizing unstable genes in lactococci.     

Campbell-like integration of heterologous plasmid DNA into the chromosome of Lactococcus lactis subsp. lactis.

Integrable vectors were constructed based on the plasmid pHV60, which is essentially a pBR322 replicon carrying a chloramphenicol resistance marker, by inserting 1.3-kilobase chromosomal fragments of Lactococcus lactis subsp. lactis MG1363 into this plasmid. Three constructs as well as pHV60 were electroporated to strain MG1363. Transformants were obtained with all constructs, and also with pHV60 (albeit with low frequency). By using Southern hybridizations, it appeared that pHV60 showed homology with the chromosome of MG1363, and that it most probably uses this homology to integrate in a Campbell-like manner. The presence of chromosomal sequences in pHV60 stimulated insertion elsewhere in the chromosome by a factor of 5 to 100. In all cases the integrated plasmids were amplified, at a selective pressure of 5 micrograms of chloramphenicol per ml, to a level of approximately 15 copies per chromosome. Although the amplification was gradually lost under nonselective conditions, one copy remained stably integrated in the chromosome. The results show that a Campbell-like integration strategy can be used to improve the accessibility of the lactococcal chromosome for genetic analysis and is potentially useful in stabilizing unstable genes in lactococci.     

Molecular characterization of the integration of the lactose plasmid from Lactococcus lactis subsp. cremoris SK11 into the chromosome of L. lactis subsp. lactis.

When Lactococcus lactis subsp. lactis LM0230 is transformed by the lactose plasmid (pSK11L) from Lactococcus lactis subsp. cremoris SK11, variants with pSK11L in the integrated state can be derived (J. M. Feirtag, J. P. Petzel, E. Pasalodos, K. A. Baldwin, and L. L. McKay, Appl. Environ. Microbiol. 57:539-548, 1991). In the present study, a 1.65-kb XbaI-XhoI fragment of pSK11L was subcloned for use as a probe in Southern hybridization analyses of the mechanism of integration, which was shown to proceed via a Campbell-like, single-crossover event. Furthermore, the presence of the XbaI-XhoI fragment in a nonreplicating vector facilitated the stable, Rec-dependent integration of the vector into the chromosome of L. lactis subsp. lactis LM0230 and other lactococci. DNA sequence analysis of the fragment revealed an open reading frame of 885 bp with lactococcal expression sequences. The putative gene did not have significant homology with other genes in computer data bases. The XbaI-XhoI fragment is a naturally occurring piece of lactococcal DNA that can be used as a recombinogenic cassette in the construction of integration vectors for the industrially important lactococci.     

Molecular characterization of the integration of the lactose plasmid from Lactococcus lactis subsp. cremoris SK11 into the chromosome of L. lactis subsp. lactis.

When Lactococcus lactis subsp. lactis LM0230 is transformed by the lactose plasmid (pSK11L) from Lactococcus lactis subsp. cremoris SK11, variants with pSK11L in the integrated state can be derived (J. M. Feirtag, J. P. Petzel, E. Pasalodos, K. A. Baldwin, and L. L. McKay, Appl. Environ. Microbiol. 57:539-548, 1991). In the present study, a 1.65-kb XbaI-XhoI fragment of pSK11L was subcloned for use as a probe in Southern hybridization analyses of the mechanism of integration, which was shown to proceed via a Campbell-like, single-crossover event. Furthermore, the presence of the XbaI-XhoI fragment in a nonreplicating vector facilitated the stable, Rec-dependent integration of the vector into the chromosome of L. lactis subsp. lactis LM0230 and other lactococci. DNA sequence analysis of the fragment revealed an open reading frame of 885 bp with lactococcal expression sequences. The putative gene did not have significant homology with other genes in computer data bases. The XbaI-XhoI fragment is a naturally occurring piece of lactococcal DNA that can be used as a recombinogenic cassette in the construction of integration vectors for the industrially important lactococci.     

Stability of Integrated Plasmids in the Chromosome of Lactococcus lactis

Derivatives of plasmids pBR322, pUB110, pSC101, and pTB19, all containing an identical fragment of lactococcal chromosomal DNA, were integrated via a Campbell-like mechanism into the same chromosomal site of Lactococcus lactis MG1363, and the transformants were analyzed for the stability of the integrated plasmids. In all cases the erythromycin resistance gene of pE194 was used as a selectable marker. Transformants obtained by integration of the pBR322 derivatives contained a head-to-tail arrangement of several plasmid copies, which most likely was caused by integration of plasmid multimers. Single-copy integrations were obtained with the pSC101 and pTB19 derivatives. In all of these transformants no loss of the erythromycin gene was detected during growth for 100 generations in the absence of the antibiotic. In contrast, transformants containing integrated amplified plasmid copies of pUB110 derivatives were unstable under these conditions. Since pUB110 appeared to have replicative activity in L. lactis, we suggest that this activity destabilized the amplified structures in L. lactis.     

Construction of a food-grade multiple-copy integration system for Lactococcus lactis

A food-grade vector system was developed that allows stable integration of multiple plasmid copies in the chromosome of Lactococcus lactis. The vector consists of the plus origin of replication (Ori⁺) of the lactococcal plasmid pWV01, the sucrose genes of the lactic acid bacterium Pediococcus pentosaceus PPE1.0 as selectable marker, a multiple-cloning site, and a lactococcal DNA fragment of a well-characterized chromosomal region. The system includes two L. lactis strains, LL108 and LL302, which produce the pWV01 RepA protein essential for replication of the Ori⁺ vectors. These helper strains allow the construction and isolation of the replicating form of the integration plasmids from a homologous background. Single-cross-over integration of the plasmids in L. lactis MG1363 resulted in amplifications to a level of approximately 20 copies/chromosome after selection of the transformants on medium containing sucrose as the only fermentable sugar. The amplifications were stable under selective growth conditions. In glucose-containing medium a limited loss of integrated plasmid copies was detected at a rate of (7.5–15) × 10⁻² copies per generation. One strain, MG124, was isolated that had retained 11 integrated copies after a period of 120 generations of non-selective growth. These results show that the single-cross-over integration system described here represents a simple procedure for the engineering of stable food-grade strains carrying multiple copies of a gene of interest. Received: 23 September 1997 / Received revision: 21 November 1997 / Accepted: 21 November 1997     

Theta replication of the lactococcal plasmid pWVO2

pWVO2 is a 3.8 kb narrow-host-range plasmid from Lactococcus lactis ssp. cremoris Wg2, which does not replicate in Bacillus subtilis or Escherichia coli. Single-stranded pWVO2 DNA was not observed in lactococcal cells, indicating that this plasmid does not replicate via a rolling-circle mechanism. The sequence of pWVO2 neither showed the structural organization typical for rolling-circle plasmids, nor were sequence similarities with known rolling-circle plasmids present. By 2-D agarose gel electrophoresis of replication intermediates, it was shown that pWVO2 replicates via a theta mechanism. This is the first proof for the existence of theta-replicating plasmids in lactococci. The pWVO2 minimal replicon is strongly related to that of several other lactococcal plasmid replicons. It contains one open reading frame encoding the replication protein, which is preceded by a 22 bp sequence tandemly repeated three and a half times. Further upstream is another 10bp direct repeat present in an A/T-rich sequence. This structural organization resembles that of several iteroncontaining theta-type plasmids from E. coli. Derivatives of pWVO2 were stably maintained in L. lactis and are good candidates for the development of stable food-grade cloning vectors for this organism.     

New tools for the physical and genetic mapping of Lactococcus strains.

Tools for the genetic and physical analysis of the Lactococcus lactis subsp. lactis genome were developed. Plasmid pRC1 does not replicate in Gram+ bacteria; it contains unique ApaI, NotI and SmaI restriction sites and an erythromycin-resistance (ErR) encoding gene, ermAM, functional in L. lactis subsp. lactis. When a chromosomal L. lactis subsp. lactis DNA fragment was cloned into this vector, the resulting plasmid became integrated, after transformation, into the bacterial chromosome by homologous recombination in a Campbell-like manner. The integration lead to the generation of new rare restriction sites near to the host fragment. This procedure allows precise mapping of cloned genes onto the chromosomal restriction map. The mapping of the his operon of L. lactis subsp. lactis provides an illustration. The cloning into pRC1 of an IS element able to transpose into the chromosome of the target cell, gave rise to an integration plasmid able to insert randomly rare restriction sites onto the bacterial chromosome. The L. lactis IS element, ISS1RS, was cloned into pRC1, yielding pRL1. Pulsed-field gel electrophoresis analysis of ErR clones obtained after transformation with pRL1, showed that this plasmid was stably integrated at a number of different sites in the L. lactis subsp. lactis chromosome, via transposition. Plasmids pRC1 and pRL1 can greatly facilitate the construction of the physical and genetic map of the chromosome of lactococcal strains.     

Site-specific integration of the phage ΦCTX genome into the Pseudomonas aeruginosa chromosome: characterization of the functional integrase gene located close to and upstream of attP

The site-specific integration of the phage ?CTX genome, which carries the gene for a pore-forming cytotoxin, into the Pseudomonas aeruginosa chromosome was analysed. The 1,167 by integrase gene, int, located immediately upstream of the attachment site, attP, was characterized using plasmid constructs, harbouring the integration functions, and serving as an integration probe in both P. aeruginosa and Escherichia coli. The attP plasmids p1000/p400 in the presence of the int plasmid pIBH and attP-int plasmids pINT/pINTS can be stably integrated into the P. aeruginosa chromosome. Successful recombination between the attP plasmid p1000 and the attB plasmid p5.1, in the presence of the int plasmid pIBH in E. coli HB101 showed that the int gene is active in trans in E. coli. The int gene product was detected as a 43 kDa protein in E. coli maxicells harbouring pINT. Proposed integration arm regions downstream of attP are not necessary for the integration process. pINT and phage ?CTX could be integrated together into P. aeruginosa chromosomal DNA, yielding double integrates.     

Integration of vector-containing Bacillus subtilis chromosomal DNA by a Campbell-like mechanism

Summary Using plasmid pHV60, which contains a chloramphenicol resistance (Cm^r) gene that is expressed in Bacillus subtilis, a set of transformation-deficient strains of B. subtilis was isolated by insertional mutagenesis. When chromosomal DNA from these mutants was used to transform a transformation-proficient B. subtilis strain, almost all of the Cm^r transformants had the mutant phenotype as expected. However, with a frequency of approximately 3×10^-4 atypical transformants with the wild-type phenotype were produced. Data concerning amplification of the DNA containing the Cm^r marker and duplication of DNA sequences are presented that suggest that these atypical transformants are the result of a Campbell-like integration of the chromosomal DNA containing the integrated plasmid. Transductional mapping showed that in the atypical transformants the vector-containing DNA had a strong tendency to integrate at sites adjacent to the original site of integration, although integration at sites elsewhere on the chromosome was also observed. The production of atypical transformants is explained on the basis of integration of chromosomal DNA by a Campbell-like mechanism. Circularization of vector-containing chromosomal DNA is thought to occur through joining of the extremities of single-stranded DNA molecules by fortuitous base pairing with an independently entered single-stranded DNA molecule.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Duplication of the streptokinase gene in the chromosome of Streptococcus equisimilis H46A

The erythromycin resistance plasmid pSM752 carrying the cloned streptokinase gene, skc, was introduced by protoplast transformation into Streptococcus equisimilis H46A from which skc was originally cloned. Cells transiently supporting the replication of pSM752 gave rise to an erythromycin-resistant clone designated H46SM which was plasmid free and produced streptokinase at levels approximately twice as high as the wild type. Southern hybridization of total cell DNA with an skc-containing probe provided evidence for the duplication of the skc gene in the H46SM chromosome. The results, which have some bearing on industrial streptokinase production, can be best explained by a single cross-over event between the chromosome and the plasmid in the region of shared homology leading to the integration of pSM752 in a Campbell-like manner.     

Integration and excision of plasmid DNA in Lactococcus lactis subsp. lactis

The capacity of the 75-kb lactose-proteinase plasmid pCI301 from Lactococcus lactis subsp. lactis UC317 to recombine with the lactococcal chromosome was examined. Low-frequency integration of pCI301 sequences was detected following protoplast transformation of strain MG136Sm with total plasmid DNA from strain UC317. Excision of integrated sequences was subsequently observed at a low level. Excised sequences were rescued through recombination with and mobilization by the conjugative enterococcal plasmid pAMB1. Transconjugants harboring novel recombinant pCI301::pAMB1 plasmids, both pAMB1 and a pCI301 derivative, and pAMB1 only were isolated. The latter represents a class of transconjugant in which an elevated level of reintegration of pCI301 DNA in the recipient chromosome has occurred.     

玉米黑粉菌DNA载体的构建和它的原生质球的转化和再生

我们用玉米黑粉菌(Ustilago maydis)热休克基因(Heat shock gene,hsp 70)的启动子和终止子与新霉素磷酸转移酶基因相连,构建成了有效的双功能质粒pDL1(在E。coli中用Amp作为选择标记,在玉米黑粉菌中用新霉素作为选择标记)。以分离的一株新霉素敏感的玉米黑粉菌作为受体菌,用构建的pDL1质粒作为供体DNA,对影响受体菌原生质球的形成条件(培养基、菌龄、各种酶、酶的浓度、作用时间和渗透压稳定剂)、再生条件和DNA转化条件进行了初步研究。对数前中期收集的菌体,以5mg/ml真菌溶壁酶处理30分钟左右,90%都形成原生质球,其再生率为60—80%,转化率为300—1000转化子/μg DNA。随机选出25个转化子,DNA杂交都为阳性。分析dot-blot和Southern blot DNA杂交结果,发现质粒在细胞中以整合形式存在,一个细胞可以有多拷贝的整合质粒,质粒可能以非完全同源性的重组形式,参入性地整合进染色体中。     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Site-specific integration of the phage ΦCTX genome into the Pseudomonas aeruginosa chromosome: characterization of the functional integrase gene located close to and upstream of attP

The site-specific integration of the phage CTX genome, which carries the gene for a pore-forming cytotoxin, into the Pseudomonas aeruginosa chromosome was analysed. The 1,167 by integrase gene, int, located immediately upstream of the attachment site, attP, was characterized using plasmid constructs, harbouring the integration functions, and serving as an integration probe in both P. aeruginosa and Escherichia coli. The attP plasmids p1000/p400 in the presence of the int plasmid pIBH and attP-int plasmids pINT/pINTS can be stably integrated into the P. aeruginosa chromosome. Successful recombination between the attP plasmid p1000 and the attB plasmid p5.1, in the presence of the int plasmid pIBH in E. coli HB101 showed that the int gene is active in trans in E. coli. The int gene product was detected as a 43 kDa protein in E. coli maxicells harbouring pINT. Proposed integration arm regions downstream of attP are not necessary for the integration process. pINT and phage CTX could be integrated together into P. aeruginosa chromosomal DNA, yielding double integrates.     

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.     

Isolation and characterization of plasmid mutations that enable partitioning of pSC101 replicons lacking the partition (par) locus.

Second-site mutations that allow stable inheritance of partition-defective pSC101 plasmids mapped to seven distinct sites in the 5' half of the plasmid repA gene. While the mutations also elevated pSC101 copy number, there was no correlation between copy number increase and plasmid stability. Combinations of mutations enabled pSC101 DNA replication in the absence of integration host factor and also stabilized par-deleted plasmids in cells deficient in DNA gyrase or defective in DnaA binding. Our findings suggest that repA mutations compensate for par deletion by enabling the origin region RepA-DNA-DnaA complex to form under suboptimal conditions. They also provide evidence that this complex has a role in partitioning that is separate from its known ability to promote plasmid DNA replication.     

Structural and functional analysis of the single-strand origin of replication from the lactococcal plasmid pWV01

The single-strand origin (SSO) of the rolling-circle (RC), broad-host-range lactococcal plasmid pWVO1 was functionally characterized. The activity of this SSO in the conversion of single-stranded DNA to double-stranded DNA was tested both in vivo and in vitro. In addition, the effect of this SSO on plasmid maintenance was determined. The functional pWVO1 SSO comprises a 250 by region, containing two inverted repeats (IRs). The activity of each IR was tested, separately and in combination, in a plasmid derivative that was otherwise completely devoid of structures that might function as SSO. One of the IRs (IR 1) showed some homology with other previously described SSOs of the SSO_A type, as well as with the conversion signal of the Escherichia coli phage X174. This IR was shown to have a partial, RNA polymerise-independent activity in complementary strand synthesis, both in vivo and in vitro. The second IR, which had no activity of its own, was required for full SSO activity, both in vivo and in vitro. The conversion of single-stranded DNA to the double-stranded form by the complete SSO was only partly sensitive to inhibition by rifampicin, indicating the existence of an RNA polymerase-independent pathway for this event. The results suggest that the pWVO1 SSO can be activated by two different routes: an RNA polymerise-dependent one (requiring the entire SSO), and an RNA polymerase-independent one (requiring only IR I).