Phosphorus-31 and cadmium-113 NMR studies of some cadmium(II) complexes containing tricyclohexylphosphine and tributylphosphine

Phosphorus-31 and cadmium-113 NMR spectroscopy has been used to study the interaction between tertiary phosphines (P(c-C₆H₁₁)₃ and PBu₃) and Cd(O₃SCF₃)₂, Cd(ClO₄)₂, Cd(CF₃COO)₂ and Cd(SCN)₂ salts in solution. the NMR data imply the formation in solution of novel 1:1 adducts CdX₂(phos) (X = O₃SCF₃, ClO₄, CF₃COO, phos = P(c-C₆H₁₁)₃, PBu₃) in which there is substantial interaction between the anions and cadmium. Data are also presented for mixed phosphine complexes CdX₂[P(c-C₆H₁₁)₃][PBu₃] (X = O₃SCF₃, ClO₄, NO₃, CF₃COO, CH₃COO, Cl, Br, I, SCN). The two bond coupling constants ²J(P′P) of these mixed phosphine complexes decrease as the coordination ability of the anion increases and cover the narrow range from 95 Hz to 66 Hz.     

Quantifying the electronic cis effect of phosphine, arsine and stibine ligands by use of rhodium(I) Vaska-type complexes

The cis effects of phosphine, arsine and stibine ligands have been evaluated by measuring the IR stretching frequency in dichloromethane of the carbonyl ligand in a series of Rh(I) Vaska-type complexes, trans-[RhCl(CO)(L)₂]. These data were correlated with those obtained by Tolman for the electronic trans influences in the [Ni(L)(CO)₃] complexes. The electronic contribution, χ_Fc, of ferrocenyl was determined as 0.8 from these plots by evaluating PPh₂Fc as ligand. In order to accommodate arsine and stibine ligands an additional correction term, to compensate for differences in the donor atom, was added to Tolman’s equation for calculation of the Tolman electronic parameter of phosphine ligands. In the resulting equation: ν(CO_Ni)=2056.1+∑_i=1³χ_i+C_L values for C_L of C_P=0, C_As=−1.5 and C_Sb=−3.1 are suggested for phosphine, arsine and stibine ligands, respectively. The crystal and molecular structures of trans-[RhCl(CO)(PPh₂Fc)₂] · 2C₆H₆, trans-[RhCl(CO){P(NMe₂)₃}₂] and trans-[RhCl(CO)(AsPh₃)₂] are reported. The Tolman cone angles for PPh₂Fc and P(NMe₂)₃ were determined as 169° and 166°, while the effective cone angles for PPh₂Fc, P(NMe₂)₃ and AsPh₃ were determined as 171°, 168° and 147°, respectively.     

Tertiary phosphine complexes of nickel(0) and nickel(I). New dinitrogen complexes of nickel(0)

The reduction of NiX₂(PCy₃)₂ (X = Cl, Br; PCy₃ = tricyclohexylphosphine) in toluene with sodium sand under argon affords [NiX(PCy₃)₂]₂ or Ni(PCy₃)₃. In the same way starting from NiX₂P₂ [X = Cl, Br; P = P(C₂H₅)₃, P(CH₂CH₂CH₂CH₃)₃, P(C₂H₅)₂ C₆H₅] the tetracoordinate Ni(0) complexes NiP₄ are obtained. These give NiP₃(N₂) under nitrogen. The electronic spectra of Ni(0) and Ni(I) complexes, both in the solid state and solution, are reported.     

Preparation of ruthenium(II) chloride complexes of polybasic amines

The reactions of RuCl₂[P(C₆H₅)₃]₃, RuCl₂(tmeda)₂, and RuCl₂(1,5-COD)(tmeda) with polybasic amines such as pyrazole have been studied. From the phosphine complex, a binuclear complex has been isolated in which one pyrazole has been incorporated, while reactions of the latter two with excess pyrazole lead to the replacement of a tmeda ligand by two pyrazoles.     

Solution-phase disproportionation equilibria for monosubstituted Pentakis- (arylisocyanide)cobalt(I) complexes by proton-NMR studies

Equilibrium constants, K_dis, for the solvent- dependent, solution-phase disproportionation equilibria of monosubstituted pentakis(arlisocyanide)cobalt(I) complexes: 2[Co(CNR)₄L]⁺?[Co(CNR)₃L₂]⁺ + [Co(CNR)₅]⁺, K_dis = $\text{[Co(CNR)}{}_3\text{L}{}_2\text{][Co(CNR)}{}_5\text{]}\text{[Co(CNR)}{}_4\text{L]}{}^2$ are measured by planimeter-integration of proton- NMR spectra at ambient temperature. The complexes, [Co(CNR)₄L]ClO₄, R = 2,6-Me₂C₆H₃, L = P(C₆H₅)₃, P(C₆H₄Cl-p)₃, P(OC₆H₅)₃, P(OC₆H₄Cl-p)₃; R = o-MeC₆H₄, L = P(C₆H₄Cl-p)₃, P(OC₆H₅)₃, P(OC₆H₄Cl-p)₃; R = 2,4,6-Me₃C₆H₂, L = P(C₆H₅)₃; R = 2,6-Et₂C₆H₃, L = P(C₆H₅)₃; are investigated in the deuterated solvents, CDCl₃, CD₃CN, (CD₃)₂CO, C₅D₅N, CD₃NO₂, and (CD₃)₂SO. Disproportionation seems to occur in all [Co(CNR)₄L]⁺, but NMR study is facilitated by utilizing equivalent alkyl protons (i.e., Me-groups) on the RNC ligands.Correlation of K_dis values with steric-hindrance of the RNC in sets of complexes with the same P-ligand is evident in all solvents: K_dis decreases with increased steric-hindrance in RNC. The K_dis values for complexes with the same RNC and analogous triarylphosphine, triarylphosphite ligands (i.e., PR₃, P(OR)₃, same R) are approximately equal. The K_dis values for complexes of P-ligands with Cl-substituent are significantly larger than K_dis values for complexes with the corresponding unsubstituted P-ligands (e.g., [Co(CNR)₄P(C₆H₄Clp)₃]ClO₄vs. [Co(CNR)₄P(C₆H₅)₃]ClO₄) in (CD₃)₂CO and C₅D₅N solution, but are smaller in CDCl₃ and CD₃CN, and approximately equal in CD₃NO₂ and (CD₃)₂SO. Properties of the solvents are also considered.     

Squarate complexes of diamine palladium(II) and platinum(II)

Reactions of cis-diaminediaqua palladium and platinum dinitrates and of trans-diaminediaqua platinum dinitrate give complexes of the type Pd(tmeda)(OH)(C₄O₄)Pd(tmeda)(C₄O₄H) (tmeda = tetramethylethylenediamine) (1), (en)M(C₄O₄)₂M(en) (en = ethylenediamine (M = Pd, Pt) and trans-[Pt- (NH₃)₂C₄O₄]_n, respectively. The structures of these compounds are discussed on the basis of their spectroscopic data.     

Platinum(II) complexes with aryl tellurols and diaryl ditellurides: Syntheses and spectral investigations

Arytellurol complexes [PtCl(TeAr)(PPh₃)₂] (I) and [Pt(TeAr)₂(PPh₃)₂] (II) are readily obtained from cis-[PtCl₂(PPh)₃)₂] and NaTeAr (Ar = C₆H₅, 4-CH₃OC₆H₄ and 4-CH₃CH₂OC₆H₄) in ethanolbenzene at room temperature. ³¹P NMR spectra of (I) and (II) indicate their trans configuration in solution. Metathetical reactions between I (Ar = 4-CH₃OC₆H₄) and NaX (X = I, Br, SCN) occur in methanol to give [Pt(X)(TeC₆H₄OCH₃-4)(PPh₃)₂]. ¹H NMR shows that equimolar proportions of NaTeC₆H₅, NaTeC₆H₄OCH₂CH₃-4 and cis-[PtCl₂(PPh₃)₂] give a mixture of three complexes: II, Ar = C₆H₅; II, Ar = 4-CH₃CH₂OC₆H₄; and [Pt(TeC₆H₅)(TeC₆H₄OCH₂CH₃-4)(PPh₃)₂]. Polymeric complexes [PtCl(TeAr)]_n (III) and [Pt(TeAr)₂]_n (IV) result from reaction between K₂[PtCl₄] and NaTeAr in aqueaous ethanol. They react with excess of PPh₃ in CDCl₃ to yield monomeric complexes I and II respectively which were characterized in situ by ¹H and ³¹P NMR of the reaction mixtures. IR spectra indicate the presence of bridging chloride ligands in III. An alternating chloride and tellurol bridged chain structure for III and a tellurol bridged for IV have been proposed. Reaction between equimolar amounts of III and PPh₃ in dichloromethane yielded a tellurol bridged dimeric complex [PtCl(μ-TeAr)(PPh₃)]₂ (V) with terminal chloride ligand as suggested by IR study. Ethanolic solutions of diarylditellurides also react readily with an aqueous solution of K₂[PtCl₄] at 10 °C to give complexes for which the structure trans-[PtCl₂(ArTeTeAr)₂] (VI) is suggested from their elemental analyses, IR, Raman (in one case only), ¹H, ¹²⁵Te (in one case only), and ¹⁹⁵Pt NMR spectra and reactions with triphenylphosphine which liberated free ditellurides. At 40 °C or above the same ditellurides form polymeric complexes III with K₂[PtCl₄] in aquaeous ethanol.     

Structural isomerism involving an ambidentate ligand: the synthesis and characterization of diselenocyanato [bis(diphenylphosphino)methane] palladium(II) and cyano(selenocyanato) [diphenyl(diphenylphosphinomethyl)phosphine selenide] palladium(II)

The reaction, at 25 °C in methanol, between [Pd(SeCN)₄]²⁻ and bis(diphenylphosphino)methane (dpm) has been found to produce cyano(selenocyanato) [diphenyl(diphenylphosphinomethyl) phosphine selenide]palladium(II), [Pd(dpmSe)(CN)(SeCN)], wherein the cyanide group is trans to an Se atom which has been inserted into one PdP bond, and the selenocyanate group is trans to the unchanged diphenylphosphino group. The structure has been confirmed by the results of a single crystal X-ray diffraction study. The structural isomer, [Pd(dpm)- (SeCN)₂], of the foregoing complex has also been prepared by the reaction of Pd(C₂H₃O₂)₂ with dpm, followed by reaction with KSeCN. Heating the [Pd(dpm)(SeCN)₂] isomer converts it into [Pd- (dpmSe)(CN)(SeCN)]. A mechanism is proposed for the isomerization which involves an intramolecular selenium atom insertion.     

Copper(I)-organophosphine complexes of bis(3,5-dimethylpyrazol-1-yl)dithioacetate ligand

Copper(I) complexes have been synthesized from the reaction of CuCl, monodentate tertiary phosphines PR₃ (PR₃ = P(C₆H₅)₃; P(C₆H₅)₂(4-C₆H₄COOH); P(C₆H₅)₂(2-C₆H₄COOH); PTA, 1,3,5-triaza-7-phosphaadamantane; P(CH₂OH)₃, tris(hydroxymethyl)phosphine) and lithium bis(3,5-dimethylpyrazolyl)dithioacetate, Li[LCS₂]. Mono-nuclear complexes of the type [LCS₂]Cu[PR₃] have been obtained and characterized by elemental analyses, FT-IR, ESI-MS and multinuclear (¹H, ¹³C and ³¹P) NMR spectral data; in these complexes the ligand behaves as a κ³-N,N,S scorpionate system. One exception to this stoichiometry was observed in the complex [LCS₂]Cu[P(CH₂OH)₃]₂, where two phosphine co-ligands are coordinated to the copper(I) centre. The solid-state X-ray crystal structure of [LCS₂]Cu[P(C₆H₅)₃] has been determined. The [LCS₂]Cu[P(C₆H₅)₃] complex has a pseudo tetrahedral copper site where the bis(3,5-dimethylpyrazolyl)dithioacetate ligand acts as a κ³-N,N,S donor.     

Structural criteria for the activity of rhodium(I) phosphine complexes in the catalytic dehydrocoupling of di-n-hexylsilane

The activity of several neutral, rhodium(I) bis(phosphine) complexes for the dehydrogenative coupling of di-n-hexylsilane to two- and three-silicon chains was investigated and discussed in the context of the coordination numbers and geometries likely to be critical to catalyst activity. Wilkinson’s dimer, [Rh(μ-Cl)(PPh₃)₂]₂, shows the highest activity, while [Rh(μ-Cl)(dppe)]₂, with its rigidly cis-chelating diphosphine ligand, shows negligible activity for the dehydrocoupling reaction, even when the reaction is carried out in methylene chloride, in which both catalyst and silane are soluble. A dramatic decrease in the activity of Wilkinson’s dimer when the reaction is carried out in toluene or methylene chloride solution instead of neat silane is attributed to rate-limiting escape of the product hydrogen gas away from the solvated active catalyst.     

Unusual phenomenon in the chemistry of orthometalated ruthenium (II) complexes

Yellow cyclometalatated ruthenium (II) complexes [Ru(o-X-2-py)(MeCN)₄]PF₆ (1, X = C₆H₄ (a) or 4-MeC₆H₃ (b)) react readily with 1,10-phenanthroline (LL) in MeCN to give brownish-red species cis-[Ru(o-X-2-py)(LL)(MeCN)₂]PF₆ in high yields. The same reaction of the same complexes under the same conditions with 2,2′-bipyridine results in a significant color change from yellow to brownish-orange suggesting a formation of new species. Surprisingly, X-ray structural studies of these two complexes showed that they are structurally indistinguishable from the starting complexes 1. Referred to as complexes 4a,b, the new compounds are slightly more stable in the air though their spectral characteristics in solution are similar to 1a,b. The diffuse reflectance spectroscopy is so far the only technique that indicated differences between 1 and 4.     

Catechol oxidase and phenoxazinone synthase activity of a manganese(II) isoindoline complex

The mononuclear [Mn(6′Me₂indH)(H₂O)₂(CH₃CN)](ClO₄)₂ (6′Me₂indH: 1,3-bis(6′-methyl-2′-pyridylimino)isoindoline) complex has been prepared and characterized by various techniques such as elemental analysis, IR, UV-visible and ESR spectroscopy. The title compound was suitable as catalyst for the catalytic oxidation of 3,5-di-tert-butylcatechol (3,5-DTBCH₂) to 3,5-di-tert-butyl-1,2-benzoquinone (3,5-DTBQ) (catecholase activity), and o-aminophenol (OAPH) to 2-aminophenoxazine-3-one (APX) (phenoxazinone synthase activity) with dioxygen at ambient condition in good yields. Kinetic measurements revealed first-order dependence on the catalyst and dioxygen concentration and saturation type behavior with respect to the corresponding substrate. It was also found that the added triethylamine in both systems accelerates the reaction.     

Organometallic nickel(II) complexes with dithiophosphate, dithiophosphonate and monothiophosphonate ligands

The hydroxo complex [NBu₄]₂[Ni₂(C₆F₅)₄(μ-OH)₂] reacts with ammonium O,O^′-dialkyldithiophosphates, O-alkyl-p-methoxyphenyldithiophosphonate acids and ammonium O-alkylferrocenyldithiophosphonates in dichloromethane under mild conditions to give, respectively, [NBu₄][Ni(C₆F₅)₂{S(S)P(OR)₂}] (R=Me (1), Et (2), ⁱPr (3)) and [NBu₄][Ni(C₆F₅)₂{S(S)P(OR)Ar}] (Ar=p-MeOC₆H₄, R=Me (4), Et (5), ⁱPr (6); Ar=ferrocenyl; R=Me (7), Et (8), ⁱPr (9)). The monothiophosphonate nickel complexes [NBu₄][Ni(C₆F₅)₂{S(S)P(OR)(ferrocenyl)}] (R=Et (10), ⁱPr (11)) are obtained by reaction of the hydroxo complex with O-alkylferrocenyldithiophosphonate acids. Analytical (C, H, N, S), conductivity, and spectroscopic (IR, ¹H, ¹⁹F and ³¹P NMR, and FAB-MS) data were used for structural assignments. A single-crystal X-ray diffraction study of [NBu₄][Ni(C₆F₅)₂{S(S)P(OMe)(p-MeOC₆H₄)}] (4) and [NBu₄][Ni(C₆F₅)₂{S(O)P(OEt)(ferrocenyl)}] (10) shows that in both cases the coordination around the nickel atom es essentially square planar with NiC₂S₂ and NiC₂SO central cores, respectively.     

Aerosol-assisted chemical vapour deposition (AACVD) of silver films from triorganophosphine adducts of silver carboxylates, including the structure of [Ag(O2CC3F7)(PPh3)2]

Silver carboxylates [Ag(O₂CR): R=Me, ^tBu, 2,4,6-Me₃C₆H₂], fluorocarboxlyates [Ag(O₂CR_f): R_f=C₃F₇, C₆F₁₃, C₇F₁₅] and their phosphine adducts [Ag(O₂CR)·nPR₃′: R=Me, ^tBu, 2,4,6-Me₃C₆H₂, R′=Me, Ph, n=2; R=Me, R′=Me, n=3; Ag(O₂CR_f).2PPh₃, R_f=C₃F₇, C₆F₁₃, C₇F₁₅] have been synthesised, characterised spectroscopically and used as precursors in the aerosol-assisted chemical vapour deposition of silver films. All the phosphine adducts produced films, though in general PMe₃ adducts, proved more successful than PPh₃ analogues. The fluoro-carboxylates and their PPh₃ adducts all generated silver films, though the growth rate for the adducts was lower. All these latter films showed carbon impurities while fluorine was also evident in most cases. The X-ray structure of AgO₂CC₃F₇·2PPh₃ is also reported.     

Synthesis and coordination chemistry of tripodal dialkyl[1,2-bis(diethylcarbamoyl)ethyl]phosphonates with lanthanide nitrates

Trifunctional dialkyl [1,2-bis(diethylcarbamoyl)- ethyl] phosphonates, (RO)₂P(O)CH[C(O)N(C₂H₅)₂]- [CH₂C(O)N(C₂H₅)₂] R  CH₃, C₂H₅, i-C₃H₇, n-C₆H₁₃ were prepared from the respective sodium salts, Na[(RO)₂P(O)CHC(O)N(C₂H₅)₂] and N,N- diethylchloroacetamide, and they were characterized by elemental analysis, mass, infrared and NMR spectroscopy. The molecular structure of (i-C₃H₇O)₂- P(O)CH[C(O)N(C₂H₅)₂][CH₂C(O)N(C₂H₅)₂] was determined by single crystal X-ray diffraction analysis and found to crystallize in the monoclinic space group P2₁/c with a=15.589(6), b=9.783(4), c= 16.283(7) Å, β = 110.90(3)°, Z = 4 and V= 2320(2) ų. The structure was solved by direct methods and blocked least-squares refinement converged with Rf = 5.7% and R_wF= 4.4% on 2266 unique data with F>4σ(F). Important bond distances include PO 1.459(3) Å, CHCO 1.228(3) Å and CHCH₂CO 1.223(3) Å. The coordination chemistry of the ligand with several lanthanides was examined, and the structure of the complex Gd(NO₃)₃{[(i-C₃H₇O)₂P(O)CH[C(O)N(C₂H₅)₂][CH₂C(O)N(C₂H₅)₂]}₂·H₂O was determined. The complex crystallized in the monoclinic space group P2₁/n with a = 13.524(5), b = 22.033(4), c = 19.604(4) Å β = 106.22(2)°, Z = 4 and V= 5609(3) ų. The structure was solved by heavy atom techniques and blocked least-squares refinement converged with R_F = 5.9% and R_wF = 4.1% on 5275 reflections with F > 4σ(F). Both trifunctional ligands were found to bond to Gd(III) through only the phosphoryl oxygen atoms. The remainder of the Gd coordination sphere was composed of three bidentate nitrate oxygen atoms and an oxygen bonded water molecule. Several important bond distances include GdO(phosphoryl)_av = 2.343(5) Å, GdO(nitrate)_av = 2.475(7) Å, GdO(water) = 2.354(5) Å, PO(phosphoryl)_av = 1.467(6) Å, CHCO_av = 1.242(10) Å and CHCH₂CO_av = 1.209(11) Å.     

Novel ruthenium(II) diamine complexes

The complex cations [Ru(C₇H₁₆N₂)(C₁₀H₁₄)Cl]⁺, [Ru(C₇H₁₆N₂)(C₆H₆)Cl]⁺, [Ru(C₉H₁₈N₂)(C₆H₆)Cl]⁺, [Ru(C₉H₁₈N₂)(C₁₀H₁₄)Cl]⁺ and [Ru(C₁₄H₁₆N₂)(C₁₀H₁₄)Cl]⁺ have been synthesised from the reaction between the ruthenium-arene complexes [with C₆H₆ (benzene) or C₁₀H₁₄ (p-cymene)] and the respective chiral diamines [C₇H₁₆N₂=(S)-(−)-2-aminomethyl-1-ethylpyrrolidine, C₉H₁₈N₂=(S)-(+)-2-(pyrrolidinylmethyl)-pyrrolidine, or C₁₄H₁₆N₂=(1R,2R)-(+)-1,2-diphenylethylenediamine], isolated and characterised as chloride salts using single-crystal X-ray diffraction. All complexes were fully characterised by elemental analysis, mass spectrometry, ¹³C and ¹H NMR, and also found to exhibit catalytic activity in the transfer hydrogenation of acetophenone to 1-phenylethanol at 50 °C (enantiomeric excesses range from ca. 25% to 60%, and conversions from ca. 30% to 50%).     

Synthesis and crystal structures of di- and tetra-nuclear dicarboxylate-bridged copper(II) complexes

Three new Cu(II) complexes, [Cu₂(C₃H₂O₄)(phen)₂(H₂O)₃](NO₃)₂(H₂O)₂ (1) (C₃H₂O₄ = malonate, phen = 1,10-phenanthroline), [Cu₂(C₄H₄O₄)(phen)₂(H₂O)₂](NO₃)₂ (2) (C₄H₄O₄ = succinate), and {[Cu₂(phen)₂(H₂O)(NO₃)]₂(C₅H₆O₄)₂}(NO₃)₂ (3) (C₅H₆O₄ = glutarate) have been synthesized and characterized by elemental analysis, infrared spectroscopy, thermogravimetric analysis, and single crystal X-ray diffraction. The X-ray analysis reveals that the structures of 1 and 2 are of dinuclear copper(II) complexes bridged by malonate and succinate dianions, respectively, and 3 is a tetranuclear species formed by two {[Cu₂(phen)₂(H₂O)(NO₃)](C₅H₆O₄)} fragments. The copper ions in 1 and 3 show square-pyramidal coordination geometry, while the copper ions in 2 exhibit a square planar geometry. In each complex, the dicarboxylate ligand is coordinated to copper ions as a chelate and monodentate (1), bis-monodentate (2), and bis-bridging ligand toward the copper ions with syn-syn coordination mode (3).     

X-ray crystallographic investigation and biological activities of Ru(III) complexes containing Schiff base and triphenyl phosphine/arsine

The crystal structures of the complexes [RuCl(Nap-o-phd)(AsPh₃)] and [RuBr(Nap-o-phd)(PPh₃)] (where H₂-Nap-o-phd = N,N′-bis(2-hydroxy-1-naphthaldehyde) o-phenylenediamine) have been determined by single crystal X-ray diffraction techniques. The antibacterial properties of the complexes have also been examined.     

Synthesis and characterization of palladium(II) complexes with aryl tellurols and diaryl ditellurides

Polymeric complexes of formula [PdCl(TeAr)]_n (I) and [Pd(TeAr)₂]_n (II) are readily obtained by the reaction between Na₂[PdCl₄] and NaTeAr (ArC₆H₅, C₆H₄OCH₃−4 and C₆H₄OCH₂CH₃−4) in ethanol at room temperature. Chemical and far infrared spectral evidences support alternating chloride and tellurol bridges in I and tellurol bridges in II. While the reaction of I (AtC₆H₄OCH₃−4) with PPh₃ in stoichiometric amount results in splitting of chloride bridges and formation of a tellurol bridged dimeric complex [PdCl(TeC₆H₄OCH₃−4)(PPh₃)]₂ (III), with excess of PPh₃, cleavage of both chloride and tellurol bridges leads to the formation of a monomeric compound [PdCl(TeC₆H₄OCH₃−4)(PPh₃)₂] (IV). Furthermore, the reaction of I (Ar C₆H₄OCH₂CH₃−4) with 1,2-bis(diphenyl phosphino)ethane in equimolar ratio also resulted in a monomeric compound [(PdCl(TeC₆H₄OCH₂CH₃−4)(diphos)] (V). The complex III (ArC₆H₄OCH₂CH₃−4) is also prepared by the reaction between Pd(PPh₃)₂Cl₂ and Ph₃SnTeC₆H₄OCH₂CH₃−4 in 1:1 molar ratio or between Pd₂Cl₄(PPh₃)₂ and Ph₃SnTeC₆H₄OCH₂CH₃−4 in 1:2 molar ratio in benzene at room temperature. Sodium tetrachloropalladate reacts readily with diarylditellurides in ethanol at 0 °C to form dimeric complexes [PdCl₂(ArTeTeAr)]₂ (VI). However, at 40 °C or above the same ditellurides form polymeric complexes I with Na₂[PdCl₄] in ethanol. The complex VI is also obtained by the reaction of Pd(PhCN)₂Cl₂ with Te₂Ar₂ in benzene at room temperature. The complexes were characterized by elemental analysis, IR, Raman and ¹H NMR spectra and, where possible, by conductivity measurements and molecular weight determinations.     

The microwave synthesis of platinum(II) phosphine complexes

The microwave synthesis of a series of platinum(II) phosphine complexes is reported. The complexes dppePtCl₂ (dppe = bis(diphenylphosphino)ethane), dpppPtCl₂ (dppp = bis(diphenylphosphino)propane), dppmPtCl₂ (dppm = bis(diphenylphosphino)methane) and cis-(Ph₃P)₂PtCl₂ are synthesized from the reaction of potassium tetrachloroplatinate(II) and the phosphine. The isolated yields are 65% or better.