Coordination chemistry of copper-molybdates with alkoxide ligands: The {Mo4O10(OMe)6} and [Mo2O4{RC(CH2O)3}2] clusters as building blocks

The reactions of the Keplerate super cluster [Mo₁₃₂O₃₇₂(CH₃CO₂)₃₀(H₂O)₇₂]⁴²⁻ with a Cu(II) source and an organonitrogen donor in methanol/DMF solutions yielded a series of bimetallic organic-inorganic oxide hybrid materials, including the molecular species [Cu(phen)₂MoO₄] (1) and [{Cu(terpy)}₂(MoO₄)₂] (2) and a series of materials constructed from the tetranuclear building block {Mo₄O₁₀(OMe)₆}²⁻: the molecular [{Cu₂(phen)₂(O₂CCH₃)₂ (MeOH)}Mo₄O₁₀(OMe)₆] (3), [{Cu(terpy)(O₂CCH₃)}₂Mo₄O₁₀(OMe)₆] (4) and [{Cu(terpy)Cl}₂Mo₄O₁₀(OMe)₆] (5), the one-dimensional phases [{Cu(bpy)(HOMe)₂}Mo₄O₁₀(OMe)₆] (6), [{Cu(bpy)(DMF)₂}Mo₄O₁₀(OMe)₆] (7), [{Cu(bpa)(DMF)₂}Mo₄O₁₀(OMe)₆] (8), [{Cu(phen)(DMF)₂}Mo₄O₁₀(OMe)₆] (9) and [{CuCl(dpa)}₂Mo₄O₁₀(OMe)₆] (10), and the two-dimensional material [{Cu₂(DMF)₂(pdpa)}{Mo₄O₁₀(OMe)₆}₂] (11). When methanol is replaced by the tridentate alkoxide tris-methoxypropane (trisp), the {Mo₂O₄(trisp)₂}²⁻ cluster building block is observed for [Cu(phen)Mo₂O₄(trisp)₂] (12), [Cu(bpa)(DMF)Mo₂O₄(trisp)₂] (13) and [{Cu(bpy)(NO₃)}₂Mo₂O₄(trisp)₂] (14).     

Dinuclear Rh(II) complexes with one polypyridyl ligand, structure, properties and antitumor activity

Rhodium(II) complexes [Rh₂(μ-OAc)₂(OAc)(bpy)(H₂O)₂]PF₆ (1), [Rh₂(μ-OAc)₂(OAc)(phen)(H₂O)₂](PF₆)·H₂O (2), [Rh₂(μ-OOCCH₃)₃(OOCCH₃)(phen)] (3) and [Rh₂(μ-O₂CCH₃)₃(O₂CCH₃)(Ph₂phen)] (4) (Ph₂phen = 4,7-diphenyl-1,10-phenanthroline) have been synthesized and characterized by means of NMR, IR and UV-Vis spectroscopic methods. X-ray structure of complex 4·1.5(CH₃COCH₃) has been determined and its geometry and electronic structure has been elucidated using OPBE and B3LYP DFT methods. The compounds are active cytostatic agents against tumor cells.     

Two new supermolecular structures of organic-inorganic hybrid compounds: [Zn(phen)(SO4)(H2O)2]n and [Cu(phen)(H2O)2] · SO4 (phen = 1,10-phenanthroline)

Two new organic-inorganic hybrid compounds [Zn(phen)(SO₄)(H₂O)₂]_n (1) and [Cu(phen)(H₂O)₂] · SO₄ (2) have been prepared by conventional aqueous solution synthesis and characterized by single-crystal X-ray diffraction, IR spectroscopy, thermal gravimetric analysis (TGA) and fluorescent spectroscopy. In compound 1, the sulfate group adopts bidentate mode to coordinate with two Zn(II) ions to form one-dimensional polymer. The one-dimensional polymers are further linked together via the intermolecular hydrogen-bonding and π-π stacking interactions to form a 3D supramolecular framework. Compound 2 is build up of discrete [Cu(phen)(H₂O]²⁺ cations and SO₄²⁻ anions to form a three-dimensional framework via hydrogen-bonding and π-π stacking interactions. Furthermore, the luminescent properties of both 1 and 2 were studied. The complexes 1 and 2 excited at 280 nm wavelength produced characteristic luminescence features, arising maybe due to the π-π transitions.     

Syntheses and structures of the heterometallic clusters [(Ph3PAu)3Re(CO)4], [(Ph3PAu)4Re(CO)4], [(Ph3PAu)6AuRe2(CO)8], and [(Ph3PAu)6Re(CO)3]

The reaction of [HRe₃(CO)₁₂]²⁻ with an excess of Ph₃PAuCl in CH₂Cl₂ yields [(Ph₃PAu)₄Re(CO)₄]⁺ as the main product, which crystallizes as [(Ph₃PAu)₄Re(CO)₄]PF₆ · CH₂Cl₂ (1 · CH₂Cl₂) after the addition of KPF₆.The crystal structure determination reveals a trigonal bipyramidal Au₄Re cluster with the Re atom in equatorial position.If [(Ph₃PAu)₄Re(CO)₄]⁺ is reacted with PPh₄Cl, a cation [Ph₃PAu]⁺ is eliminated as Ph₃PAuCl, and the neutral cluster [(Ph₃PAu)₃Re(CO)₄] (2) is formed.It combines with excess [(Ph₃PAu)₄Re(CO)₄]⁺ to afford the cluster cation, [(Ph₃PAu)₆AuRe₂(CO)₈]⁺. It crystallizes from CH₂Cl₂ as[(Ph₃PAu)₆AuRe₂(CO)₈]PF₆ · 4CH₂Cl₂ (3 · 4CH₂Cl₂). In [(Ph₃PAu)₃Re(CO)₄] the metal atoms are arranged in form of a lozenge while in [(Ph₃PAu)₆AuRe₂(CO)₈]⁺ two Au₄Re trigonal bipyramids are connected by a common axial Au atom.The treatment of [(Ph₃PAu)₄Re(CO)₄]⁺ with KOH and Ph₃PAuCl in methanol yields the cluster cation [(Ph₃PAu)₆Re(CO)₃]⁺, which crystallizes with from CH₂Cl₂ as [(Ph₃PAu)₆Re(CO)₃]PF₆ · CH₂Cl₂ (4 · CH₂Cl₂). The metal atoms in this cluster form a pentagonal bipyramid with the Re atom in the axial position.     

Chemistry at the apical position of square-pyramidal copper(II) complexes: Synthesis, crystal structures, and magnetic properties of homopolynuclear complexes with azido bridges containing [Cu(AA)(BB)] moieties (AA = acetylacetonate; BB = 1,10-phenanthroline, bipy = 2,2′-bipyridine)

Three new homopolynuclear complexes with azido bridges have been obtained by using [Cu(AA)(BB)]⁺ building-blocks (AA = acetylacetonate; BB = 1,10-phenanthroline or 2,2′-bipyridine). The reaction between [Cu(acac)(phen)(H₂O)](ClO₄) and NaN₃ leads to a mixture of two compounds: a binuclear complex, [{Cu(acac)(phen)}₂(μ_1,3-N₃)](ClO₄) · 2H₂O (1), and a linear tetranuclear one, [{Cu(acac)(phen)(ClO₄)}₂{Cu(phen)(μ_1,1-N₃)₂}₂] (2). The reaction between [Cu(acac)(bipy)(H₂O)](ClO₄) and NaN₃ affords also a mixture of two compounds: [{Cu(acac)(bipy)}₂(μ_1,3-N₃)]₃(ClO₄)₃ · 3.75H₂O (3) and [Cu(acac)(bipy)(N₃)][Cu(acac)(bipy)(H₂O)](ClO₄) (4). The X-ray crystal structures of compounds 1-4 have been solved (for compound 4 the crystal structure was previously reported). In compounds 1 and 3, two {Cu(AA)(BB)} fragments are bridged by the azido anion in an end-to-end fashion. Two isomers, cis and trans with respect to azido bridge, were found in crystal 3. The structure of compound 2 consists of two Cu(II) central cations bridged by two μ_1,1-azido ligands, each of them being also connected to a {Cu(acac)(phen)} fragment through another μ_1,1-azido ligand. The cryomagnetic properties of the compounds 1 and 2 have been investigated and discussed. The magnetic behaviour of compound 1 shows the absence of any interactions between the metallic ions. In the tetranuclear complex 2, the magnetic interactions between the external and central copper(II) ions(J₁), and between the central metallic ions (J₂) were found ferromagnetic (J₁ = 0.36 cm⁻¹, J₂ = 7.20 cm⁻¹).     

Ternary copper(II) complexes with hippurate derivatives and 1,10-phenanthroline: Synthesis and biological activity

Several new Cu-hippurate derivative-phenanthroline ternary complexes have been prepared. The X-ray structure of one of them, [Cu(hip)(phen)₂]⁺·(hip⁻) (2) (where hip is hippurate and phen is 1,10-phenanthroline) has been solved. The structure of this new compound shows important differences (3D-pattern) to other similar related complexes (2D-pattern). A study of the biological activity of [Cu(hip)(phen)₂]⁺·(hip⁻)·2H₂O (2), [Cu(BGG)(phen)₂]⁺·(BGG⁻)·6H₂O (3), [Cu(B^IGG)₂(phen)](H₂O) (4) and [Cu(I-hip)(bpy)₂]⁺·(I-hip⁻)·3.5H₂O (5) (where I-hip is ortho-iodohippurate, BGG corresponds to benzoylglycilglycine, and B^IGG is ortho-iodobenzoylglycilglycine) is included and compared with the anti-proliferative activity of [Cu(I-hip)(phen)₂]⁺·(I-hip⁻)·7H₂O (1) previously described, resulting in a greater cytotoxic activity of the compounds with 1,10-phenanthroline instead of those with 2,2′-bipyridyl, in the same way that removing iodine substitution or lengthening the peptidic chain diminishes the activity of compounds compared with 1. The presence of an ortho-iodine group and the direct bond between Ar-CO and glycine moieties yield to the best results.     

Variation of DNA photocleavage efficiency for [(TL)2Ru(dpp)]Cl2 complexes where TL = 2,2′-bipyridine, 1,10-phenanthroline, or 4,7-diphenyl-1,10-phenanthroline

The complexes [(bpy)₂Ru(dpp)]Cl₂, [(phen)₂Ru(dpp)]Cl₂, and [(Ph₂phen)₂Ru(dpp)]Cl₂ (where dpp = 2,3-bis(2-pyridyl)pyrazine, bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline, Ph₂phen = 4,7-diphenyl-1,10-phenanthroline) have been investigated and found to photocleave DNA via an oxygen-mediated pathway. These light absorbing complexes possess intense metal-to-ligand charge transfer (MLCT) transitions in the visible region of the spectrum. The [(TL)₂Ru(dpp)]²⁺ systems populate ³MLCT states after visible light excitation, giving rise to emissions in aqueous solution centered at 692, 690, and 698 nm for TL = bpy, phen, and Ph₂phen respectively. The ³MLCT states and emissions are quenched by O₂, producing a reactive oxygen species. These complexes photocleave DNA with varying efficiencies, [(Ph₂phen)₂Ru(dpp)]²⁺ > [(phen)₂Ru(dpp)]²⁺ > [(bpy)₂Ru(dpp)]²⁺. The presence of the polyazine bridging ligand will allow these chromophores to be incorporated into larger supramolecular assemblies.     

Silver(I) derivatives with new functionalised acylpyrazolonates

Silver(I) acylpyrazolonate derivatives of formula [Ag(Q)(R₃P)]₂ and [Ag(Q)(R₃P)₂], (QH=1-phenyl-3-methyl-4-R′(CO)-pyrazol-5-one; Q^OH, R′=furane; Q^SH, R′=thiophene; R=Ph, Cy, o-tol), have been synthesised and characterised, both in the solid state and in solution. The derivatives [Ag(Q)(R₃P)]₂ contain dinuclear AgO₂NP units with the acylpyrazolonate coordinating in a bridging O,O′-Q-N fashion. The [Ag(Q)(R₃P)₂] are tetrahedral species, with the distortion from ideal geometry increasing with the bulk of the phosphine. The [Ag(Q)(R₃P)₂] derivatives are fluxional in chloroform solution when R₃P is sterically hindered (R=Cy or o-tol), dissociating partially to the [Ag(Q)(R₃P)] fragment and free R₃P. [Ag(Q^S)(Ph₃P)]₂ reacts with 1-methyl-2-mercaptoimidazole (Hmimt) affording the compound [Ag(Hmimt)(Ph₃P)(Q^S)] and [Ag(Q^O)(Ph₃P)]₂ reacts with 1-methyl-imidazole (Meim) affording the compound [Ag(Meim)(Ph₃P)(Q^O)], whereas [Ag(Q^S)(Ph₃P)]₂ reacts with 1,10-phenanthroline (phen), affording the compound [Ag(phen)(Ph₃P)](Q^S). Finally [Ag(Q^S)(Ph₃P)₂] reacts with phen producing the ionic species [Ag(phen)(Ph₃P)₂](Q^S).     

Comparative studies on copper(I) complexes: synthesis, X-ray crystallography and electrochemical properties of [Cu(dafone)nX] complexes (dafone=4,5-diaza-fluoren-9-one, X=Br, I, SCN)

The synthesis, X-ray structures and electrochemical properties of stable five-coordinate, trigonal-bipyramidal Cu^I complexes of dafone (4,5-diaza-fluoren-9-one) [Cu(dafone)₂X] with X=Br (1) or I (2) as ancillary ligands are discussed. The thiocyanate-bridged polymeric Cu^I complex of dafone, [Cu(dafone)(SCN)]_n (3), forms two-dimensional sheets in the crystal, held together by weak interactions involving the dafone ketone group, while the phenanthroline complex, [Cu(phen)(SCN)]_n (4), a zigzag arrangement of the phen ligands leads to interchain π-stacking within the lattice. The electrochemical studies reveal that dafone stabilizes the Cu^I oxidation state more efficiently than phen due to its better π-acceptor ability as indicated by more positive redox potentials for the Cu^I/Cu^II couple.     

Further investigations into the isomerism of Cu(II) complexes of diphenylsulfimide: the preparation and X-ray crystal structure of {[Cu(Ph2SNH)4][CuBr2(Ph2SNH)2]Br2}, the first example of a {[CuL4][CuX2L2]X2} structure

Green crystalline [Cu(Ph₂SNH)₄][CuBr₂(Ph₂SNH)₂]Br₂ (2) forms when the product of the reaction of CuBr₂ with Ph₂SNH (1) (molar ratio 1:3) in MeCN is extracted into CH₂Cl₂–60/80 petroleum ether and the solvents allowed to evaporate slowly. The product is notable for two reasons: not only does it contain the CuBr₂(Ph₂SNH)₂ unit in the hitherto unseen planar isomer (the free material forming only the pseudo-tetrahedral isomer), but, more significantly, it is also the first example of a structurally characterised [CuL₄][CuX₂L₂]X₂ system.     

Cyclometalated ruthenium(II) complexes of benzo[h]quinoline (bzqH)[Ru(bzq)(NCMe)4], [Ru(bzq)(LL)(NCMe)2], and [Ru(bzq)(LL)2] (LL = bpy, phen)

Cyclometalation of benzo[h]quinoline (bzqH) by [RuCl(μ-Cl)(η⁶-C₆H₆)]₂ in acetonitrile occurs in a similar way to that of 2-phenylpyridine (phpyH) to afford [Ru(bzq)(MeCN)₄]PF₆ (3) in 52% yield. The properties of 3 containing ‘non-flexible’ benzo[h]quinoline were compared with the corresponding [Ru(phpy)(MeCN)₄]PF₆ (1) complex with ‘flexible’ 2-phenylpyridine. The [Ru(phpy)(MeCN)₄]PF₆ complex is known to react in MeCN solvent with ‘non-flexible’ diimine 1,10-phenanthroline to form [Ru(phpy)(phen)(MeCN)₂]PF₆, being unreactive toward ‘flexible’ 2,2′-bipyridine under the same conditions. In contrast, complex 3 reacts both with phen and bpy in MeCN to form [Ru(bzq)(LL)(MeCN)₂]PF₆ {LL = bpy (4) and phen (5)}. Similar reaction of 3 in methanol results in the substitution of all four MeCN ligands to form [Ru(bzq)(LL)₂]PF₆ {LL = bpy (6) and phen (7)}. Photosolvolysis of 4 and 5 in MeOH occurs similarly to afford [Ru(bzq)(LL)(MeCN)(MeOH)]PF₆ as a major product. This contrasts with the behavior of [Ru(phpy)(LL)(MeCN)₂]PF₆, which lose one and two MeCN ligands for LL = bpy and phen, respectively. The results reported demonstrate a profound sensitivity of properties of octahedral compounds to the flexibility of cyclometalated ligand. Analogous to the 2-phenylpyridine counterparts, compounds 4-7 are involved in the electron exchange with reduced active site of glucose oxidase from Aspergillus niger. Structure of complexes 4 and 6 was confirmed by X-ray crystallography.     

Coordination characteristics of di-O-picolyl derivative of 1,1′-methylene-bis(2-naphthol): First crystal structure of a monomeric Cu(II) complex of bis{2-[(pyridin-2-yl)methoxy] naphthalen-1-yl}methane

Monomeric Cu(II) complex of bis{2-[(pyridin-2-yl)methoxy] naphthalen-1-yl}methane (L) having a composition, {[Cu(L)(H₂O)(ClO₄)](ClO₄)(CH₃OH)₂} (1) has been synthesized and characterized by analytical, spectral and magnetic methods and the structure has been established for the first time based on single crystal XRD. The Cu²⁺ center shows axially elongated octahedron with a bound water and perchlorate moieties, where two of the coordinations were long but within the van der Waals distance. The bound water, perchlorate ions and the methanol of crystallization are primarily responsible for the formation of extended lattice structure resulted from the intra-helical interactions. Complex 1 exhibit catecholase activity as studied using 3,5-di-tert-butyl catechol.     

3D supramolecular network assembly and thermal decomposition of new copper(II) complexes with pyrazine-2,6-dicarboxylic acid

Four new Cu(II) complexes [Cu(pzda)(2,2′-bpy)(H₂O)] · 2.5H₂O (1), [Cu(pzda)(phen)(H₂O)] · H₂O (2), [Cu(pzda)(4,4′-bpy)] · H₂O (3) and [Cu(pzda)(bpe)_0.5(H₂O)] (4) were synthesized by hydrothermal reactions of copper salt (acetate or sulphate) with pyrazine-2,6-dicarboxylic acid (H₂pzda), and 2,2′-bipyridine (2,2′-bpy), 1,10-phenanthroline (phen), 4,4′-bipyridine (4,4′-bpy) or 1,2-bis(4-pyridyl)-ethane (bpe), respectively. For 1 and 2, they are both monomeric entities which are further assembled into 3D supramolecular networks by hydrogen bonds and π-π stacking interactions. Complex 3 has a 2D metal-organic framework which is connected into 3D supramolecular network by hydrogen bonds. However, for 4, the bpe ligand bridges two Cu(II) ions into binuclear unit, and then the binuclear molecules are assembled into 3D supramolecular network by hydrogen bonds between the coordination water molecule and the carboxylate oxygen atoms. The thermal decomposition mechanism of complexes 1 and 2 cooperated with powder XRD at different temperatures is discussed. The results reveal that once liberation of water molecules takes place the supramolecular network of 1 and 2 collapses.     

Some binuclear acetonitrile ‘solvated’ complexes of copper(I) chloride and bromide with triphenylarsine

Reaction of copper(I) chloride and bromide, CuX (X = Cl or Br), with triphenylarsine in acetonitrile solution has resulted in two adducts, respectively, of 2:3:1, [(Ph₃As)₂Cu(μ-Cl)₂Cu(AsPh₃)(NCMe)] (1), and 1:1:2 stoichiometry, [(Ph₃As)(MeCN)Cu(μ-Br)₂Cu(NCMe)(AsPh₃)] · 2MeCN (2), characterized by elemental analysis, IR, ESI MS and NMR spectroscopy, and room temperature single crystal X-ray structure determinations. The environments of the two four-coordinate copper(I) atoms in 1 are different, being As₂Cu(μ-Cl)₂ and As,NCu(μ-Cl)₂. (2) is also binuclear, being a centrosymmetric dimer with the two four-coordinate, symmetry-related copper atoms having As,NCu(μ-Br)₂-environments.     

Structural and equilibrium studies on mixed ligand complexes of Co(II), Ni(II), Cu(II) and Zn(II) with N-(2-benzimidazolyl)methyliminodiacetic acid and typical N, N donor ligands

Mixed ligand complexes: [Co(L)(bipy)] · 3H₂O (1), [Ni(L)(phen)] · H₂O (2), [Cu(L)(phen)] · 3H₂O (3) and [Zn(L)(bipy)] · 3H₂O (4), where L²⁻ = two -COOH deprotonated dianion of N-(2-benzimidazolyl)methyliminodiacetic acid (H₂bzimida, hereafter, H₂L), bipy = 2,2′ bipyridine and phen = 1,10-phenanthroline have been isolated and characterized by elemental analysis, spectral and magnetic measurements and thermal studies. Single crystal X-ray diffraction studies show octahedral geometry for 1, 2 and 4 and square pyramidal geometry for 3. Equilibrium studies in aqueous solution (ionic strength I = 10⁻¹ mol dm⁻³ (NaNO₃), at 25 ± 1 °C) using different molar proportions of M(II):H₂L:B, where M = Co, Ni, Cu and Zn and B = phen, bipy and en (ethylene diamine), however, provides evidence of formation of mononuclear and binuclear binary and mixed ligand complexes: M(L), M(H₋₁L)⁻, M(B)²⁺, M(L)(B), M(H₋₁L)(B)⁻, M₂(H₋₁L)(OH), (B)M(H₋₁L)M(B)⁺, where H₋₁L³⁻ represents two -COOH and the benzimidazole N₁-H deprotonated quadridentate (O⁻, N, O⁻, N), or, quinquedentate (O⁻, N, O⁻, N, N⁻) function of the coordinated ligand H₂L. Binuclear mixed ligand complex formation equilibria: M(L)(B) + M(B)²⁺ ? (B)M(H₋₁L)M(B)⁺ + H⁺ is favoured with higher π-acidity of the B ligands. For Co(II), Ni(II) and Cu(II), these equilibria are accompanied by blue shift of the electronic absorption maxima of M(II) ions, as a negatively charged bridging benzimidazolate moiety provides stronger ligand field than a neutral one. Solution stability of the mixed ligand complexes are in the expected order: Co(II) < Ni(II) < Cu(II) > Zn(II). The Δ log K_M values are less negetive than their statistical values, indicating favoured formation of the mixed ligand complexes over the binary ones.     

Dinuclear triply-bridged copper(II) compounds containing carboxylato bridges and di-2-pyridylamine as a ligand: synthesis, crystal structure, spectroscopic and magnetic properties

Three new triply-bridged dinuclear copper(II) compounds with carboxylato bridges, [Cu₂(μ-O₂CH)(μ-OH)(μ-Cl)(dpyam)₂](PF₆) (1), [Cu₂(μ-O₂CH)₂(μ-OH)(dpyam)₂](PF₆) (2) and [Cu₂(μ-O₂CCH₂CH₃)₂(μ-OH)(dpyam)₂](ClO₄) (3) (dpyam = di-2-pyridylamine) have been synthesized and characterized crystallographically and spectroscopically. Compound 1 consists of a dinuclear unit in which both copper(II) ions are bridged by three different ligands, i.e., formate, chloride and hydroxide anions, providing a distorted trigonal bipyramidal geometry with a CuN₂O₂Cl chromophore. Compounds 2 and 3 have two bridging formato ligands and two bridging propionato ligands, respectively, together with a hydroxo bridge. The carboxylato ligands in both compounds 2 and 3 exhibit different coordination modes. One is in a syn, syn η¹:η¹:μ₂ bridging mode and the other is in a monoatomic bridging mode. The structure of compound 2 involves a dinuclear unit, with a distorted trigonal bipyramidal geometry around each Cu(II) ion with a CuN₂O₃ chromophore. Compound 3 contains a non-centrosymmetric unit; the coordination environment around Cu(1) is a distorted square-pyramidal geometry and an intermediate geometry of sp and tbp around the Cu(II) ion. The Cu?Cu separations are 3.061, 3.113 and 3.006 Å for compounds 1, 2 and 3, respectively. The EPR spectra of all three compounds show a broad isotropic signal with a g value around 2.10.The magnetic susceptibility measurements, measured from 5 to 280 K, revealed a moderate ferromagnetic interaction between the Cu(II) ions with a singlet-triplet energy gap (J) of 79.7, 47.8 and 24.1 cm⁻¹, for compounds 1, 2 and 3, respectively. Also a very weak intermolecular antiferromagnetic interaction was observed between the dinuclear units.     

Synthesis, characterisation and antimicrobial activity of copper(II) and manganese(II) complexes of coumarin-6,7-dioxyacetic acid (cdoaH2) and 4-methylcoumarin-6,7-dioxyacetic acid (4-MecdoaH2): X-ray crystal structures of [Cu(cdoa)(phen)2].8.8H(2)O and [Cu(4-Mecdoa)(phen)2].13H2O (phen=1,10-phenanthroline)

Two novel coumarin-based ligands, coumarin-6,7-dioxyacetic acid (1) (cdoaH(2)) and 4-methylcoumarin-6,7-dioxyacetic acid (2) (4-MecdoaH(2)), were reacted with copper(II) and manganese(II) salts to give [Cu(cdoa)(H(2)O)(2)].1.5H(2)O (3), [Cu(4-Mecdoa)(H(2)O)(2)] (4), [Mn(cdoa)(H(2)O)(2)] (5) and [Mn(4-Mecdoa)(H(2)O)(2)].0.5H(2)O (6). The metal complexes, 3-6, were characterised by elemental analysis, IR and UV-Vis spectroscopy, and magnetic susceptibility measurements and were assigned a polymeric structure. 1 and 2 react with Cu(II) in the presence of excess 1,10-phenanthroline (phen) giving [Cu(cdoa)(phen)(2)].8.8H(2)O (7) and [Cu(4-Mecdoa)(phen)(2)].13H(2)O (8), respectively. The X-ray crystal structures of 7 and 8 confirmed trigonal bipyramidal geometries, with the metals bonded to the four nitrogen atoms of the two chelating phen molecules and to a single carboxylate oxygen of the dicarboxylate ligand. The complexes were screened for their antimicrobial activity against a number of microbial species, including methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli and Candida albicans. The metal-free ligands 1 and 2 were active against all of the microbes. Complexes 3-6 demonstrated no significant activity whilst the phen adducts 7 and 8 were active against MRSA (MIC(80)=12.1microM), E. coli (MIC(80)=14.9microM) and Patonea agglumerans (MIC(80)=12.6microM). Complex 7 also demonstrated anti-Candida activity (MIC(80)=22microM) comparable to that of the commercially available antifungal agent ketoconazole (MIC(80)=25microM).     

Synthesis, structure and electronic spectra of new three-coordinated copper(I) complexes with tricyclohexylphosphine and diimine ligands

Three new copper(I) complexes with tricyclohexylphosphine (PCy₃) and different diimine ligands, [Cu(phen)(PCy₃)]BF₄ (1) (phen = 1,10′-phennanthroline), [Cu(bpy)(PCy₃)₂]BF₄ (2) (bpy = 2,2′-bipyridine) and [Cu(MeO-CNN)(PCy₃)]BF₄ (3) (MeO-CNN = 6-(4-methoxyl)phenyl-2,2′-bipyridine), have been synthesized and characterized. X-ray structure reveals that complexes 1 and 3 are three-coordinated with trigonal geometry, while complex 2 adopts distorted tetrahedron geometry. Complexes 1 and 3 exhibit ligand redistribution reactions in chloromethane solution by addition of excess amount of PCy₃, in which three-coordinated 1 changes into four-coordinated [Cu(phen)(PCy₃)₂]⁺, and 3 leads to form [Cu(PCy₃)₂]BF₄ and CNN-OMe. All the three complexes display yellow ³MLCT emissions in solid state at room temperature with λ_max at 558, 564 and 582 nm for 1, 2 and 3, respectively, and red-shift to 605, 628 and 643 nm at 77 K in dichloromethane solution.     

Palladium(II) complexes of 1,10-phenanthroline: Synthesis and X-ray crystal structure determination

Two palladium(II) complexes, [Pd(phen)(NCCH₃)₂][O₃SCF₃]₂ (1) and [Pd(phen)(μ-OH)]₂[O₃SCF₃]₂ · 2H₂O (2) (where phen = 1,10-phenanthroline), have been crystallized following the reaction of Pd(phen)Cl₂ with silver triflate, Ag(O₃SCF₃), in acetonitrile and water, respectively. The structures of both complexes are based on a Pd(phen)²⁺ metal core, with two acetonitrile molecules binding in a monodentate fashion in complex 1 and two hydroxo bridges holding together two cores to form a dimer in complex 2. Additionally, both complexes present a hydrogen bonded 3-D network involving the triflate anions in 1, and water and triflate anions in 2. Both complexes have been characterized by infrared and ¹H NMR spectroscopy and their crystal structures determined by X-ray crystallography.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.