Molecular simulation of Tyr105 phosphorylated pyruvate kinase M2 to understand its structure and dynamics

Microstructure of dibenzo-18-crown-6 (DB18C6) and DB18C6/Li⁺ complex in different solvents (water, methanol, chloroform, and nitrobenzene) have been analyzed using radial distribution function (RDF), coordination number (CN), and orientation profiles, in order to identify the role of solvents on complexation of DB18C6 with Li⁺, using molecular dynamics (MD) simulations. In contrast to aqueous solution of LiCl, no clear solvation pattern is found around Li⁺ in the presence of DB18C6. The effect of DB18C6 has been visualized in terms of reduction in peak height and shift in peak positions of g_Li-Ow. The appearance of damped oscillations in velocity autocorrelation function (VACF) of complexed Li⁺ described the high frequency motion to a “rattling” of the ion in the cage of DB18C6. The solvent-complex interaction is found to be higher for water and methanol due to hydrogen bond (HB) interactions with DB18C6. However, the stability of DB18C6/Li⁺ complex is found to be almost similar for each solvent due to weak complex-solvent interactions. Further, Li⁺ complex of DB18C6 at the liquid/liquid interface of two immiscible solvents confirm the high interfacial activity of DB18C6 and DB18C6/Li⁺ complex. The complexed Li⁺ shows higher affinity for water than organic solvents; still they remain at the interface rather than migrating toward water due to higher surface tension of water as compared to organic solvents. These simulation results shed light on the role of counter-ions and spatial orientation of species in pure and hybrid solvents in the complexation of DB18C6 with Li⁺. Graphical Abstract

DB18C6/Li⁺ complex in pure solvents (water, methanol, chloroform, and nitrobenzene) and water/nitrobenzene interface     

Stabilities in nitromethane of alkali metal ion complexes with dibenzo-18-crown-6 and dibenzo-24-crown-8 and their transfer from nitromethane to other polar solvents

Stability constants for the 1:1 complexes of Na⁺, K⁺, Rb⁺, and Cs⁺ with dibenzo-18-crown-6 (DB18C6) and dibenzo-24-crown-8 (DB24C8) have been determined by conductometry at 25 °C in a poorly solvating solvent, nitromethane. For both the crown ethers, the stability constant decreases with increasing metal ion size, Na⁺ > K⁺ > Rb⁺ > Cs⁺, regardless of the size compatibility between the metal ions and the ligand cavities. A comparison of the results with those in several other solvents (S: acetonitrile, propylene carbonate, water, methanol, and N,N-dimethylformamide) leads to the conclusion that the selectivity sequence of these crown ethers in nitromethane agrees with the intrinsic one in the absence of a solvent. Transfer activity coefficients of the crown ethers and their complexes from nitromethane to S have been determined to evaluate the solute-solvent interactions. It is shown that DB24C8 shields the alkali metal ions more effectively from the solvents than DB18C6 because of the larger number of oxygen atoms and the more flexible structure of DB24C8. Regarding the complexation in nitromethane as a reference, the complex stability and selectivity in S are discussed. The selectivities of these crown ethers in water, methanol, and N,N-dimethylformamide, which apparently obey the size-fit concept, are largely due to the solvation of the free alkali metal ions.     

An Anion‐Tuned Solid Electrolyte Interphase with Fast Ion Transfer Kinetics for Stable Lithium Anodes

The spatial distribution and transport characteristics of lithium ions (Li⁺) in the electrochemical interface region of a lithium anode in a lithium ion battery directly determine Li⁺ deposition behavior. The regulation of the Li⁺ solvation sheath on the solid electrolyte interphase (SEI) by electrolyte chemistry is key but challenging. Here, 1 m lithium trifluoroacetate (LiTFA) is induced to the electrolyte to regulate the Li⁺ solvation sheath, which significantly suppresses Li dendrite formation and enables a high Coulombic efficiency of 98.8% over 500 cycles. With its strong coordination between the carbonyl groups (C?O) and Li⁺, TFA^? modulates the environment of the Li⁺ solvation sheath and facilitates fast desolvation kinetics. In addition, due to relatively smaller lowest unoccupied molecular orbital energy than solvents, TFA^? has a preferential reduction to produce a stable SEI with uniform distribution of LiF and Li₂O. Such stable SEI effectively reduces the energy barrier for Li⁺ diffusion, contributing to low nucleation overpotential, fast ion transfer kinetics, and uniform Li⁺ deposition with high cycling stability. This work provides an alternative insight into the design of interface chemistry in terms of regulating anions in the Li⁺ solvation sheath. It is anticipated that this anion‐tuned strategy will pave the way to construct stable SEIs for other battery systems.     

Stability and solvation of alkali metal ion complexes with dibenzo-30-crown-10

Stability constants for the 1:1 complexes of dibenzo-30-crown-10 (DB30C10) with alkali metal ions have been determined at 25 °C in nitromethane and water by conductometry and capillary electrophoresis, respectively. Transfer activity coefficients of DB30C10 and its complexes from nitromethane to S (S = water, acetonitrile, propylene carbonate, methanol, and N,N-dimethylformamide) have been determined at 25 °C to evaluate the solvation properties. The stability constant in the poorly solvating solvent, nitromethane, decreases with increasing metal ion size, Na⁺ > K⁺ > Rb⁺ > Cs⁺, reflecting the intrinsic selectivity governed by electrostatic interaction between the metal ion and the ether oxygen atoms. It is also suggested that a part of the ether oxygen atoms does not bind to the metal ion in the Na(DB30C10)⁺ complex. The aqueous stability constant varies as Na⁺ ? K⁺ ≈ Rb⁺ ≈ Cs⁺; this selectivity pattern is similar to that in acetonitrile, propylene carbonate, and methanol. The complex stability in water is very low compared to that in the nonaqueous solvents, owing to hydrogen bonding of water to the oxygen atoms of the free crown ether. The transfer activity coefficient values show that DB30C10 shields all the metal ions effectively from the solvents and lead to the conclusion that the complexation selectivity in S receives a significant contribution from the solvation of the free metal ions. The Na(DB30C10)⁺ complex has specific interaction with water, causing much lower K⁺/Na⁺ selectivity in H₂O than in MeOH.     

Extraction properties for alkali metal picrates of macrocyclic trinuclear (p-cymene)ruthenium(II) and (pentamethylcyclopentadienyl)rhodium(III) complexes

The solvent extraction properties of macrocyclic trinuclear organometallic complexes, [(p-cymene)Ru(pyO₂)]₃ and [Cp^∗Rh(pyO₂)]₃, for Li⁺, Na⁺, and K⁺ picrates have been investigated in a dichloromethane-water system at 25 °C. The extraction rates of the alkali metal picrates with these macrocyclic complex ligands are unusually slow; the shaking times required to attain equilibrium are at least 1 h for [(p-cymene)Ru(pyO₂)]₃ and 20-40 h for [Cp^∗Rh(pyO₂)]₃. From analysis of the equilibrium data, the extraction constants (K_ex = [ML⁺A⁻]_o/[M⁺][L]_o[A⁻]; M⁺ = alkali metal ion, L = macrocyclic ligand, A⁻ = picrate ion, o = organic phase) have been determined. The log K_ex value varies in the sequences, Li⁺ (5.72) > Na⁺ (4.50) > K⁺ (2.88) for [(p-cymene)Ru(pyO₂)]₃ and Li⁺ (4.79) > Na⁺ (2.70) ≈ K⁺ (2.69) for [Cp^∗Rh(pyO₂)]₃. The K_ex values of 6,6-dibenzyl-14-crown-4 (DBz14C4), which is one of the best Li⁺-selective crown ethers, have also been determined for comparison. It is revealed that [Cp^∗Rh(pyO₂)]₃ is much superior to DBz14C4 both in the extractability for Li⁺ and the selectivity for Li⁺ over Na⁺.     

Synthesis of 1,2-cis- and 1,2-trans-glycosides of 2-acetamido-4,6-O-benzylidene-2-deoxy-d-glucopyranose by anomeric O-alkylation

The reaction of a partially protected 1-hydroxy derivative of N-acetyl-d-glucosamine with benzyl bromide under conditions of anomeric O-alkylation was studied. It was found that the stereoselectivity of the reaction depended on the nature of the alkali metal cation constituent of a transient ion pair. The substitution of the Li⁺ cation for K⁺ or complexation with a crown ether allowed the steric outcome to be shifted from β- to α-selectivity.     

Anion-cation permeability correlates with hydrated counterion size in glycine receptor channels

The functional role of ligand-gated ion channels depends critically on whether they are predominantly permeable to cations or anions. However, these, and other ion channels, are not perfectly selective, allowing some counterions to also permeate. To address the mechanisms by which such counterion permeation occurs, we measured the anion-cation permeabilities of different alkali cations, Li⁺ Na⁺, and Cs⁺, relative to either Cl⁻ or anions in both a wild-type glycine receptor channel (GlyR) and a mutant GlyR with a wider pore diameter. We hypothesized and showed that counterion permeation in anionic channels correlated inversely with an equivalent or effective hydrated size of the cation relative to the channel pore radius, with larger counterion permeabilities being observed in the wider pore channel. We also showed that the anion component of conductance was independent of the nature of the cation. We suggest that anions and counterion cations can permeate through the pore as neutral ion pairs, to allow the cations to overcome the large energy barriers resulting from the positively charged selectivity filter in small GlyR channels, with the permeability of such ion pairs being dependent on the effective hydrated diameter of the ion pair relative to the pore diameter.     

Ultrathin Li4Ti5O12 Nanosheet Based Hierarchical Microspheres for High‐Rate and Long‐Cycle Life Li‐Ion Batteries

Ultrathin Li₄Ti₅O₁₂ nanosheet based hierarchical microspheres are synthesized through a three‐step hydrothermal procedure. The average thickness of the Li₄Ti₅O₁₂ sheets is only ≈(6.6 ± 0.25) nm and the specific surface area of the sample is 178 m² g^?1. When applied into lithium ion batteries as anode materials, the hierarchical Li₄Ti₅O₁₂ microspheres exhibit high specific capacities at high rates (156 mA h g^?1 at 20 C, 150 mA h g^?1 at 50 C) and maintain a capacity of 126 mA h g^?1 after 3000 cycles at 20 C. The results clearly suggest that the utility of hierarchical structures based on ultrathin nanosheets can promote the lithium insertion/extraction reactions in Li₄Ti₅O₁₂. The obtained hierarchical Li₄Ti₅O₁₂ with ultrathin nanosheets and large specific surface area can be perfect anode materials for the lithium ion batteries applied in high power facilities, such as electric vehicles and hybrid electric vehicles.     

DFT modeling on the suitable crown ether architecture for complexation with Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> metal ions

Crown ether architectures were explored for the inclusion of Cs⁺ and Sr²⁺ ions within nano-cavity of macrocyclic crown ethers using density functional theory (DFT) modeling. The modeling was undertaken to gain insight into the mechanism of the complexation of Cs⁺ and Sr²⁺ ion with this ligand experimentally. The selectivity of Cs⁺ and Sr²⁺ ions for a particular size of crown ether has been explained based on the fitting and binding interaction of the guest ions in the narrow cavity of crown ethers. Although, Di-Benzo-18-Crown-6 (DB18C6) and Di-Benzo-21-Crown-7 (DB21C7) provide suitable host architecture for Sr²⁺ and Cs⁺ ions respectively as the ion size match with the cavity of the host, but consideration of binding interaction along with the cavity matching both DB18C6 and DB21C7 prefers Sr²⁺ ion. The calculated values of binding enthalpy of Cs metal ion with the crown ethers were found to be in good agreement with the experimental results. The gas phase binding enthalpy for Sr²⁺ ion with crown ether was higher than Cs metal ion. The ion exchange reaction between Sr and Cs always favors the selection of Sr metal ion both in the gas and in micro-solvated systems. The gas phase selectivity remains unchanged in micro-solvated phase. We have demonstrated the effect of micro-solvation on the binding interaction between the metal ions (Cs⁺ and Sr²⁺) and the macrocyclic crown ethers by considering micro-solvated metal ions up to eight water molecules directly attached to the metal ion and also by considering two water molecules attached to metal-ion-crown ether complexes. A metal ion exchange reaction involving the replacement of strontium ion in metal ion-crown ether complexes with cesium ion contained within a metal ion-water cluster serves as the basis for modeling binding preferences in solution. The calculated O-H stretching frequency of H₂O molecule in micro-solvated metal ion-crown complexes is more red-shifted in comparison to hydrated metal ions. The calculated IR spectra can be compared with an experimental spectrum to determine the presence of micro-solvated metal ion–crown ether complexes in extractant phase.     

Low‐Cost Hollow Mesoporous Polymer Spheres and All‐Solid‐State Lithium,Sodium Batteries

A practical, low‐cost synthesis of hollow mesoporous organic polymer (HMOP) spheres is reported. The electrochemical properties of Li⁺/Na⁺‐electrolyte membranes with these spheres substituting for oxide filler particles in poly(ethylene oxide) (PEO)‐filler composite are explored. The electrolyte membranes are mechanically robust, thermally stable to over 250 °C, and block dendrites from a metallic‐lithium/sodium anode. The Li⁺/Na⁺ transfer impedance across the lithium/sodium–electrolyte interface is initially acceptable at 65 °C and scavenging of impurities by the porous‐spheres filler lowers this impedance relative to that with Al₂O₃. All‐solid‐state Li/LiFePO₄ and Na/NaTi₂(PO4)₃ cells give stable discharge capacity of ≈130 and 80 mAh g^?1, respectively, at 0.5 C and 65 °C for 100 cycles.     

Regional and Subcellular Localization of Li+ and Other Cations in the Rat Brain Following Long-Term Lithium Administration

Abstract: Rats were given LiCl in their diet (40 mmol/kg dry weight) for at least 3 months to elucidate the regional and subcellular localization of Li⁺ in the brain as well as the effect of chronic lithium administration on the distribution of other cations. At steady-state the mean concentrations of Li⁺ were 0.66 mmol/kg wet weight in the whole brain and 0.52 mM in plasma. The tissue/plasma concentration ratio exceeded unity in all anatomical regions. No region showed excessive accumulation of Li⁺. Whole brain or regional contents of Na⁺ or K⁺ were unaffected by lithium treatment. Subcellular Li⁺ localization was demonstrated in nuclear, crude mitochondrial, and microsomal fractions of whole brain homogenate. Subfractionation of the crude mitochondrial fraction revealed energy-independent intrasynaptosomal and intramitochondrial Li⁺ and K⁺ localization at 0–4°C. Li⁺ administered in vivo disappeared within 10 min from synaptosomes incubated at 37°C. Li⁺ added in vitro at 1 mM attained a synaptosomal steady-state concentration within 30 min at 37°C. In control rats, synaptosomal concentrations and synaptosomal/medium concentration gradients of cations paralleled their respective in vivo concentrations and gradients. Lithium treatment caused synaptosomal depletion of K⁺ and Mg²⁺ and hence probably partial membrane depolarization. Addition of 1 mM Li⁺ in vitro also caused synaptosomal Mg²⁺ depletion. The results indicate that Li⁺ is “accumulated” in brain sediments and synaptosomes following its long-term treatment. The estimated intracellular and intrasynaptosomal Li⁺ concentrations are lower than predicted by passive distribution according to the Nernst equation, evidencing active extrusion of Li⁺.     

The effects of acetate anion on cellulose dissolution and reaction in imidazolium ionic liquids

Quantum mechanical calculations were carried out to determine the mechanisms for the superiority of the imidazolium acetate-based ionic liquids to the corresponding chloride-based ionic liquids. Our results indicate that the imidazolium cation can react with the acetate anion to generate a carbene, a highly reactive intermediate. The carbene produced then reacts with cellulose to facilitate its dissolution in the ionic liquid solvents in addition to the stronger hydrogen bonds formed between the acetate anion and the hydroxyl groups on cellulose. The mechanisms for the imidazolium cation and acetate anion reactions involve the initial ion pairing of the cation and anion via hydrogen bonding and electrostatic interactions. The hydrogen bond formed between the C2–H on the imidazolium cation and COO⁻ of the anion facilitates the transfer of the H⁺ to the anion to form a carbene intermediate.     

Dependence of the optical absorption and Na+ binding energies of coumarin-crown ethers on the size and attachment position of ether ring: density functional investigation

The crowned coumarin complexes are well known compounds for their ion recognition abilities. They undergo photophysical changes upon cation binding. On the basis of density functional theory calculations, we examined the sodium cation (Na⁺) binding energies of coumarin-crown ethers based on 15-Crown-5 (15 C5) and 18-Crown-6 (18 C6) as well as the optical absorptions of coumarin-crown ethers based on 12-Crown-4 (12 C4), 15 C5 and 18 C6. We explored why the attachment of crown ether ring to coumarin affects the Na⁺ binding energies of coumarin-crown ethers and also why the optical absorption of coumarin is modified by the crown ethers. Our study reveals that the Na⁺ ion binding energies of coumarin-crown ethers depend strongly on the size of the crown ether ring and also on the attachment position of the ether ring on coumarin. These factors affect the intramolecular charge transfer and overall stability of the complexes. The absorptions of the coumarin and ether ring parts of coumarin-crown ether are red shifted from those of isolated coumarin and crown ether, respectively. The red-shift of the coumarin ester group absorption is much stronger depending on the attachment position of the ether ring to coumarin. The absorption intensity of the coumarin part in coumarin-crown ethers is reduced for the benzene group absorption, but is enhanced for the ester group absorption.

DFT study of a series of crown-4 ethers and their selectivity trend for alkali metal cations: Li+ and Na+

The molecular and electronic structures for 12- to 16-crown-4 (named 12C4, 13C4, 14C4, 15C4, 16C4, respectively) and 2,3,5,6,8,9-hexahydrobenzo[b][1,4,7,10]tetraoxacyclododecine (B12C4) 3,5,6,7,9,10-hexahydro -2H-benzo[e][1,4,7,10]tetraoxacyclotridecine (B13C4) and their complexes with alkali metal cations Li⁺ and Na⁺ have been explored using the density functional theory (DFT) with B3LYP/ 6–31G* method. The nucleophilicity of crown-4 ethers has been investigated by the Fukui function. Their selectivity trend shows that of all the crown-4 ethers, 14C4 shows the highest cation selectivity for Li⁺ over Na⁺, has been achieved on the basis of thermodynamic analysis. In addition, Li⁺/crown-4 series are more stable than Na⁺/crown-4 series in the gas phase. The calculated results are in good agreement with the experimental observation.     

The mechanism of cation permeation in rabbit gallbladder

Summary The questions underlying ion permeation mechanisms, the types of experiments available to answer these questions, and the properties of some likely permeation models are examined, as background to experiments designed to characterize the mechanism of alkali cation permeation across rabbit gallbladder epithelium. Conductance is found to increase linearly with bathing-solution salt concentrations up to at least 400mm. In symmetrical solutions of single alkali chloride salts, the conductance sequence is K⁺>Rb⁺>Na⁺>Cs⁺∼Li⁺. The current-voltage relation is linear in symmetrical solutions and in the presence of a single-salt concentration gradient up to at least 800 mV. The anion/cation permeability ratio shows little change with concentration up to at least 300mm. Ca⁺⁺ reduces alkali chloride single-salt dilution potentials, the magnitude of the effect being interpreted as an inverse measure of cation equilibrium constants. The equilibrium-constant sequence deduced on this basis is K⁺>Rb⁺>Na⁺∼Cs⁺∼Li⁺. These results suggest (1) that the mechanism of cation permeation in the gallbladder is not the same as that in a macroscopic ion-exchange membrane; (2) that cation mobility ratios are closer to one than are equilibrium-constant ratios; (3) that the rate-limiting step for cation permeation is in the membrane interior rather than at the membrane-solution interface; and (4) that the rate-controlling membrane is one which is sufficiently thick that it obeys microscopic electroneutrality.     

Facilitated transport of di- and trinitrophenolate ions across lipid membranes by valinomycin and nonactin

The conductance of black lipid membranes in the presence of 2,4,6-trinitrophenol (or 2,4-dinitrophenol) is considerably enhanced, if the cation carriers valinomycin, enniatin B or nonactin are added. The effect is, however, largely independent of the cation concentration and is identical for the cations Li⁺, Na⁺ and Ba²⁺. This finding, as well as the sign and magnitude of the diffusion potential in the presence of a gradient of picrate are consistent with the assumption that the transport of picrate anions is facilitated by the above-mentioned macrocyclic compounds, but that cations are not directly involved. A model is suggested which, based on the generation of mobile defect structures by the incorporation of large molecules, allows one to explain facilitated transport without the assumption of stable chemical bonds between a carrier and its transported substrate.If K⁺ is present in the aqueous phase, the conductance is largely determined by the permeation of the cation complexes of valinomycin and nonactin. The conductance is, however, increased by adsorption of picrate anions to the membrane surface. The negative surface potential generated by the adsorption layer seems to be responsible for the saturation of the conductance at high picrate concentrations in the absence of valinomycin and nonactin.     

Two-phase partition studies of alkali cation complexation by ionophores

Summary The partition of alkali cations and anions between an aqueous and an immiscible organic phase has been studied in the absence and presence of neutral and carboxylic ionophores of the valinomycin and nigericin types, respectively. Cation extraction into the organic phase was augmented considerably by the ionophores, and a cation specificity of K⁺Rb⁺>Cs⁺Na⁺ was found for all the neutral ionophores tested. Evidence is given that the actual values of ion specificity are a function of the solvent polarity, especially for valinomycin where an inversion of the K⁺/Rb⁺ specificity was observed. The ionophores examined have the following rank order of effectiveness for K⁺ extraction into a standard organic phase consisting of 70% toluene-30%n-butanol: valinomycin>18-crown-6trinactin>enniatin Bdinactin>monactin>nonactin. The ion affinity and selectivity data thus obtained have been compared with data previously reported.In a toluene-butanol solvent, extraction of cations in the absence of ionophores occurs as ion pairs. On the other hand, the neutral ionophores extract the cations by the mechanism of complexation, with the lipophilic anions coextracted as free gegenionic species at lower ionophore complex concentrations. When the concentration of extracted cations exceeds 1×10^–4 m, ion pairing between the ionophore complex and the anion occurs, and this tendency increases with increasing concentration and decreasing polarity of the organic phase. Anion pairing with the complexed cations is much less than for the free cations and this effect appears to be due to the larger distance of closest approach of the anion for the complexed cation.     

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

For mass production of all‐solid‐state lithium‐ion batteries (ASLBs) employing highly Li⁺ conductive and mechanically sinterable sulfide solid electrolytes (SEs), the wet‐slurry process is imperative. Unfortunately, the poor chemical stability of sulfide SEs severely restrict available candidates for solvents and in turn polymeric binders. Moreover, the binders interrupt Li⁺‐ionic contacts at interfaces, resulting in the below par electrochemical performance. In this work, a new scalable slurry fabrication protocol for sheet‐type ASLB electrodes made of Li⁺‐conductive polymeric binders is reported. The use of intermediate‐polarity solvent (e.g., dibromomethane) for the slurry allows for accommodating Li₆PS₅Cl and solvate‐ionic‐liquid‐based polymeric binders (NBR‐Li(G3)TFSI, NBR: nitrile?butadiene rubber, G3: triethylene glycol dimethyl ether, LiTFSI: lithium bis(trifluoromethanesulfonyl)imide) together without suffering from undesirable side reactions or phase separation. The LiNi_0.6Co_0.2Mn_0.2O₂ and Li₄Ti₅O₁₂ electrodes employing NBR‐Li(G3)TFSI show high capacities of 174 and 160 mA h g^?1 at 30 °C, respectively, which are far superior to those using conventional NBR (144 and 76 mA h g^?1). Moreover, high areal capacity of 7.4 mA h cm^?2 is highlighted for the LiNi_0.7Co_0.15Mn_0.15O₂ electrodes with ultrahigh mass loading of 45 mg cm^?2. The facilitated Li⁺‐ionic contacts at interfaces paved by NBR‐Li(G3)TFSI are evidenced by the complementary analysis from electrochemical and ⁷Li nuclear magnetic resonance measurements.     

Potassium and Sodium Fluxes in the PhytopathogenicFungus Fusarium oxysporum var. lini

Rubidium uptake in potassium-starved cells followed biphasic kinetics in the micromolar and millimolar range and was independent of the temperature. In contrast, Rb⁺ uptake in normal-K⁺ cells followed a monophasic kinetics in the millimolar range and increased at temperatures higher than 30°C. Differences in the K _m values and in the Arrhenius plots of Rb⁺ uptake suggest different uptake systems in K⁺-starved and in normal-K⁺ cells. In addition, the substantial inhibition of Rb⁺ uptake caused by carbonyl cyanide-m-chlorophenyl hydrazone indicates that these systems are strongly dependent on membrane voltage. Lithium (sodium) tolerance, influx, and efflux were separately studied. F. oxysporum was shown to be very tolerant to sodium, while lithium caused a specific toxic effect. Li⁺ uptake in K⁺-starved cells exhibits a monophasic kinetics with low affinity. Li⁺ efflux was not affected by external pH or addition of potassium to the medium, suggesting that a Na⁺/cation antiporter is not involved in this process. Received: 14 March 2000 / Accepted: 5 June 2000