Cotton genome mapping with new microsatellites from Acala ‘Maxxa’ BAC-ends

Fine mapping and positional cloning will eventually improve with the anchoring of additional markers derived from genomic clones such as BACs. From 2,603 new BAC-end genomic sequences from Gossypium hirsutum Acala ‘Maxxa’, 1,316 PCR primer pairs (designated as MUSB) were designed to flank microsatellite or simple sequence repeat motif sequences. Most (1164 or 88%) MUSB primer pairs successfully amplified DNA from three species of cotton with an average of three amplicons per marker and 365 markers (21%) were polymorphic between G. hirsutum and G. barbadense. An interspecific RIL population developed from the above two entries was used to map 433 marker loci and 46 linkage groups with a genetic distance of 2,126.3 cM covering approximately 45% of the cotton genome and an average distance between two loci of 4.9 cM. Based on genome-specific chromosomes identified in G. hirsutum tetraploid (A and D), 56.9% of the coverage was located on the A subgenome while 39.7% was assigned to the D subgenome in the genetic map, suggesting that the A subgenome may be more polymorphic and recombinationally active than originally thought. The linkage groups were assigned to 23 of the 26 chromosomes. This is the first genetic map in which the linkage groups A01 and A02/D03 have been assigned to specific chromosomes. In addition the MUSB-derived markers from BAC-end sequences markers allows fine genetic and QTL mapping of important traits and for the first time provides reconciliation of the genetic and physical maps. Limited QTL analyses suggested that loci on chromosomes 2, 3, 12, 15 and 18 may affect variation in fiber quality traits. The original BAC clones containing the newly mapped MUSB that tag the QTLs provide critical DNA regions for the discovery of gene sequences involved in biological processes such as fiber development and pest resistance in cotton. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

RFLP genetic linkage maps from four F(2.3) populations and a joinmap of Gossypium hirsutum L

An RFLP genetic linkage joinmap was constructed from four different mapping populations of cotton (Gossypium hirsutum L.). Genetic maps from two of the four populations have been previously reported. The third genetic map was constructed from 199 bulk-sampled plots of an F_2.3 (HQ95–6×’MD51ne’) population. The map comprises 83 loci mapped to 24 linkage groups with an average distance between markers of 10.0 centiMorgan (cM), covering 830.1 cM or approximately 18% of the genome. The fourth genetic map was developed from 155 bulk-sampled plots of an F_2.3 (119– 5 sub-okra×’MD51ne’) population. This map comprises 56 loci mapped to 16 linkage groups with an average distance between markers of 9.3 cM, covering 520.4 cM or approximately 11% of the cotton genome. A core of 104 cDNA probes was shared between populations, yielding 111 RFLP loci. The constructed genetic linkage joinmap from the above four populations comprises 284 loci mapped to 47 linkage groups with the average distance between markers of 5.3 cM, covering 1,502.6 cM or approximately 31% of the total recombinational length of the cotton genome. The linkage groups contained from 2 to 54 loci each and ranged in distance from 1.0 to 142.6 cM. The joinmap provided further knowledge of competitive chromosome arrangement, parental relationships, gene order, and increased the potential to map genes for the improvement of the cotton crop. This is the first genetic linkage joinmap assembled in G. hirsutum with a core of RFLP markers assayed on different genetic backgrounds of cotton populations (Acala, Delta, and Texas plain). Research is ongoing for the identification of quantitative trait loci for agronomic, physiological and fiber quality traits on these maps, and the identification of RFLP loci lineage for G. hirsutum from its diploid progenitors (the A and D genomes). Received: 23 February 2001 / Accepted: 8 June 2001     

A Detailed RFLP Map of Cotton, Gossypium Hirsutum X Gossypium Barbadense: Chromosome Organization and Evolution in a Disomic Polyploid Genome

We employ a detailed restriction fragment length polymorphism (RFLP) map to investigate chromosome organization and evolution in cotton, a disomic polyploid. About 46.2% of nuclear DNA probes detect RFLPs distinguishing Gossypium hirsutum and Gossypium barbadense; and 705 RFLP loci are assembled into 41 linkage groups and 4675 cM. The subgenomic origin (A vs. D) of most, and chromosomal identity of 14 (of 26), linkage groups is shown. The A and D subgenomes show similar recombinational length, suggesting that repetitive DNA in the physically larger A subgenome is recombinationally inert. RFLPs are somewhat more abundant in the D subgenome. Linkage among duplicated RFLPs reveals 11 pairs of homoeologous chromosomal regions-two appear homosequential, most differ by inversions, and at least one differs by a translocation. Most homoeologies involve chromosomes from different subgenomes, putatively reflecting the n = 13 to n = 26 polyploidization event of 1.1-1.9 million years ago. Several observations suggest that another, earlier, polyploidization event spawned n = 13 cottons, at least 25 million years ago. The cotton genome contains about 400-kb DNA per cM, hence map-based gene cloning is feasible. The cotton map affords new opportunities to study chromosome evolution, and to exploit Gossypium genetic resources for improvement of the world's leading natural fiber.     

Genetic mapping and QTL analysis of fiber-related traits in cotton (<Emphasis Type="Italic">Gossypium</Emphasis>)

Cotton, the leading natural fiber crop, is largely produced by two primary cultivated allotetraploid species known as Upland or American cotton (Gossypium hirsutum L.) and Pima or Egyptian cotton (G. barbadense L.). The allotetraploid species diverged from each other and from their diploid progenitors (A or D genome) through selection and domestication after polyploidization. To analyze cotton AD genomes and dissect agronomic traits, we have developed a genetic map in an F₂ population derived from interspecific hybrids between G. hirsutum L. cv. Acala-44 and G. barbadense L. cv. Pima S-7. A total of 392 genetic loci, including 333 amplified fragment length polymorphisms (AFLPs), 47 simple sequence repeats (SSRs), and 12 restriction fragment length polymorphisms (RFLPs), were mapped in 42 linkage groups, which span 3,287 cM and cover approximately 70% of the genome. Using chromosomal aneuploid interspecific hybrids and a set of 29 RFLP and SSR framework markers, we assigned 19 linkage groups involving 223 loci to 12 chromosomes. Comparing four pairs of homoeologous chromosomes, we found that with one exception linkage distances in the A-subgenome chromosomes were larger than those in their D-subgenome homoeologues, reflecting higher recombination frequencies and/or larger chromosomes in the A subgenome. Segregation distortion was observed in 30 out of 392 loci mapped in cotton. Moreover, approximately 29% of the RFLPs behaved as dominant loci, which may result from rapid genomic changes. The cotton genetic map was used for quantitative trait loci (QTL) analysis using composite interval mapping and permutation tests. We detected seven QTLs for six fiber-related traits; five of these were distributed among A-subgenome chromosomes, the genome donor of fiber traits. The detection of QTLs in both the A subgenome in this study and the D subgenome in a previous study suggests that fiber-related traits are controlled by the genes in homoeologous genomes, which are subjected to selection and domestication. Some chromosomes contain clusters of QTLs and presumably contribute to the large amount of phenotypic variation that is present for fiber-related traits.Communicated by J. Dvorak     

Mapping quantitative trait loci for lint yield and fiber quality across environments in a Gossypium hirsutum × Gossypium barbadense backcross inbred line population

Identification of stable quantitative trait loci (QTLs) across different environments and mapping populations is a prerequisite for marker-assisted selection (MAS) for cotton yield and fiber quality. To construct a genetic linkage map and to identify QTLs for fiber quality and yield traits, a backcross inbred line (BIL) population of 146 lines was developed from a cross between Upland cotton (Gossypium hirsutum) and Egyptian cotton (Gossypium barbadense) through two generations of backcrossing using Upland cotton as the recurrent parent followed by four generations of self pollination. The BIL population together with its two parents was tested in five environments representing three major cotton production regions in China. The genetic map spanned a total genetic distance of 2,895 cM and contained 392 polymorphic SSR loci with an average genetic distance of 7.4 cM per marker. A total of 67 QTLs including 28 for fiber quality and 39 for yield and its components were detected on 23 chromosomes, each of which explained 6.65–25.27 % of the phenotypic variation. Twenty-nine QTLs were located on the At subgenome originated from a cultivated diploid cotton, while 38 were on the Dt subgenome from an ancestor that does not produce spinnable fibers. Of the eight common QTLs (12 %) detected in more than two environments, two were for fiber quality traits including one for fiber strength and one for uniformity, and six for yield and its components including three for lint yield, one for seedcotton yield, one for lint percentage and one for boll weight. QTL clusters for the same traits or different traits were also identified. This research represents one of the first reports using a permanent advanced backcross inbred population of an interspecific hybrid population to identify QTLs for fiber quality and yield traits in cotton across diverse environments. It provides useful information for transferring desirable genes from G. barbadense to G. hirsutum using MAS.     

四倍体栽培棉种产量和纤维品质性状的QTL定位

陆地棉和海岛棉是两个不同的四倍体栽培种 ,但在生产上各有其特点 ,陆地棉丰产性强 ,海岛棉纤维品质优良 ,利用其种间杂交群体定位产量和品质性状的QTL ,对于分子标记辅助的海岛棉优质纤维向陆地棉转移很有意义。以SSR和RAPD为分子标记 ,陆地棉与海岛棉杂种 (邯郸 2 0 8×Pima90 )F2 群体为作图群体 ,构建了一张含 12 6个标记的遗传图谱 ,包括 6 8个SSR标记和 5 8个RAPD标记 ,可分为 2 9个连锁群 ,标记间平均距离为 13 7cM ,总长1717 0cM ,覆盖棉花总基因组约 34 34% ;以遗传图 12 6个标记为基础 ,对F2 :3 家系符合正态分布的 10个农艺性状及纤维品质性状进行全基因组QTL扫描 ,结果发现 2 9个QTL分别与产量和品质性状有关。其中与衣指、籽指、皮棉产量、子棉产量、衣分等产量性状相关的QTL分别有 1、3、5、6和 1个 ,与纤维长度、整齐度、强度、伸长率和马克隆值等品质性状相关的QTL分别有 2、4、2、4和 1个。各QTL解释的变异量在 12 4 2 %～ 47 0 1%之间。其中比强度有关的 2个QTL能够解释的表型变异率分别为 34 15 %和 13 86 %。     

QTL mapping in A-genome diploid Asiatic cotton and their congruence analysis with AD-genome tetraploid cotton in genus Gossypium

Asiatic cotton(Gossypium arboreum L.) is an Old World cultivated cotton species.The sinense race was planted extensively in China.Due to the advances in spinning technology during the last century,the species was replaced by the New World allotetraploid cotton G.hirsutum L.Gossypium arboreum is still grown in India and Pakistan and also used as an elite in current cotton breeding programs.In addition,G.arboreum serves as a model for genomic research in Gossypium.In the present study,we generated an A-genome diploid cotton intraspecific genetic map including 264 SSR loci with three morphological markers mapped to 1 3 linkage groups.The map spans 2,508.71 cM with an average distance of 9.4 cM between adjacent loci.A population containing 1 76 F2:3 families was used to perform quantitative trait loci(QTL)mapping for 17 phenotypes using Multiple QTL Model(MQM)of MapQTL ver 5.0.Overall,108 QTLs were detected on 13 chromosomes.Thirty-one QTLs for yield and its components were detected in the F2 population.Forty-one QTLs for yield and its components were detected in the F2:3 families with a total of 43 QTLs for fiber qualities.Two QTLs for seed cotton weight/plant and lint index and three QTLs for seed index were consistently detected both in F2 and F2:3.Most QTLs for fiber qualities and yields were located at the same interval or neighboring intervals.These results indicated that the negative correlation between fiber qualities and yield traits may result from either pleiotropic effect of one gene or linkage effects of multiple closely linked genes.     

An intervarietal genetic linkage map of Indian bread wheat (Triticum aestivum L.) and QTL maps for some metric traits

Bread wheat (Triticum aestivum L.) exhibits very narrow genetic diversity and hence there is high relatedness among cultivated varieties. However, a population generated from an intervarietal cross, with the parents differing in a large number of traits, could lead to the generation of QTL maps which will be useful in practice. In this report a genetic linkage map of wheat is constructed using a cross between two Indian bread wheat varieties: Sonalika and Kalyansona. The linkage map consisted of 236 markers and spanned a distance of 3639 cM, with 1211.2 cM for the A genome, 1669.2 cM for the B genome, 192.4 cM for the D genome and 566.2 cM for unassigned groups. Linkage analysis defined 37 linkage groups of which 24 were assigned to 17 chromosomes. The genetic map was used to identify QTLs by composite internal mapping (CIM) for three metric traits, viz. culm length (CL), flag leaf length (FLL) and flag leaf breadth (FLB). Of 25 QTLs identified in this study, 15 have not been reported previously. Multitrait CIM (MCIM) analysis was carried out for traits that were significantly correlated such as FLB-FLL and CL-FLB-FLL. Detection of a large number of QTLs for the three traits analysed suggests that in parent cultivars that are not too diverse, the differences at genetic level detected as polymorphisms may be mostly associated with QTLs for the observed differences.     

Molecular mapping of quantitative trait loci for drought tolerance in maize plants

Drought tolerance is one of the most important but complex traits of crops. We looked for quantitative trait loci (QTLs) that affect drought tolerance in maize. Two maize inbreds and their advanced lines were evaluated for drought-related traits. A genetic linkage map developed using RFLP markers was used to identify QTLs associated with drought-related traits. Twenty-two QTLs were detected, with a minimum of one and a maximum of nine for drought-related traits. A single-QTL was detected for sugar concentration accounting for about 52.2% of the phenotypic variation on chromosome 6. A single-QTL was also identified for each of the traits root density, root dry weight, total biomass, relative water content, and leaf abscisic acid content, on chromosomes 1 and 7, contributing to 24, 0.2, 0.4, 7, and 19% of the phenotypic variance, respectively. Three QTLs were identified for grain yield on chromosomes 1, 5, and 9, explaining 75% of the observed phenotypic variability, whereas four QTLs were detected for osmotic potential on chromosomes 1, 3, and 9, together accounting for 50% of the phenotypic variance. Nine QTLs were detected for leaf surface area on chromosomes 3 and 9, with various degrees of phenotypic variance, ranging from 25.8 to 42.2%. Four major clusters of QTLs were identified on chromosomes 1, 3, 7, and 9. A QTL for yield on chromosome 1 was found co-locating with the QTLs for root traits, total biomass, and osmotic potential in a region of about 15 cM. A cluster of QTLs for leaf surface area were coincident with a QTL for osmotic potential on chromosome 3. The QTLs for leaf area also clustered on chromosome 9, whereas QTLs for leaf abscisic acid content and relative water content coincided on chromosome 7, 10 cM apart. Co-location of QTLs for different traits indicates potential pleiotropism or tight linkage, which may be useful for indirect selection in maize improvement for drought tolerance.     

A combined RFLP-SSR-AFLP map of tetraploid cotton based on a Gossypium hirsutum x Gossypium barbadense backcross population.

An interspecific Gossypium hirsutum x Gossypium barbadense backcross population of 75 BC1 plants was evaluated for 1014 markers. The map consists of 888 loci, including 465 AFLPs, 229 SSRs, 192 RFLPs, and 2 morphological markers, ordered in 37 linkage groups that represent most if not all of the 26 chromosomes, altogether spanning 4400 cM. Loci were not evenly distributed over linkage groups, and 18 of the 26 long groups had a single dense region. This paper proposes a partially revised list of the 13 pairs of homoeologous A/D chromosomes of the 2n = 4x = 52 tetraploid cotton genome. The major revisions, which involve the c3-c17, c4-c22, c5-D08, and c10-c20 homoeologous pairs, are based on the mapping of 68 SSR and RFLP loci with a known chromosome assignment, as well as on comparative alignments with previously published G. hirsutum x G. barbadense maps. The overall congruency in the locus orders and distances of common SSR and RFLP loci in these maps allows for an estimation of the consensus length that reaches a minimum of 5500 cM, and is encouraging for future efforts aimed at developing an integrated map of cultivated cotton. The present map also provides a firm framework for precision mapping of Mendelian components of quantitative traits in cotton     

GBS-SNP and SSR based genetic mapping and QTL analysis for drought tolerance in upland cotton

A recombinant inbred line mapping population of intra-species upland cotton was generated from a cross between the drought-tolerant female parent (AS2) and the susceptible male parent (MCU13). A linkage map was constructed deploying 1,116 GBS-based SNPs and public domain-based 782 SSRs spanning a total genetic distance of 28,083.03 cM with an average chromosomal span length of 1,080.12 cM with inter-marker distance of 10.19 cM.A total of 19 quantitative trait loci (QTLs) were identified in nine chromosomes for field drought tolerance traits. Chromosomes 3 and 8 harbored important drought tolerant QTLs for chlorophyll stability index trait while for relative water content trait, three QTLs on chromosome 8 and one QTL each on chromosome 4, 12 were identified. One QTL on each chromosome 8, 5, and 7, and two QTLs on chromosome 15 linking to proline content were identified. For the nitrate reductase activity trait, two QTLs were identified on chromosome 3 and one on each chromosome 8, 13, and 26. To complement our QTL study, a meta-analysis was conducted along with the public domain database and resulted in a consensus map for chromosome 8. Under field drought stress, chromosome 8 harbored a drought tolerance QTL hotspot with two in-house QTLs for chlorophyll stability index (qCSI01, qCSI02) and three public domain QTLs (qLP.FDT_1, qLP.FDT_2, qCC.ST_3). Identified QTL hotspot on chromosome 8 could play a crucial role in exploring abiotic stress-associated genes/alleles for drought trait improvement.Supplementary InformationThe online version contains supplementary material available at 10.1007/s12298-021-01041-y.     

Identification of Associated SSR Markers for Yield Component and Fiber Quality Traits Based on Frame Map and Upland Cotton Collections

Detecting QTLs (quantitative trait loci) that enhance cotton yield and fiber quality traits and accelerate breeding has been the focus of many cotton breeders. In the present study, 359 SSR (simple sequence repeat) markers were used for the association mapping of 241 Upland cotton collections. A total of 333 markers, representing 733 polymorphic loci, were detected. The average linkage disequilibrium (LD) decay distances were 8.58 cM (r² > 0.1) and 5.76 cM (r² > 0.2). 241 collections were arranged into two subgroups using STRUCTURE software. Mixed linear modeling (MLM) methods (with population structure (Q) and relative kinship matrix (K)) were applied to analyze four phenotypic datasets obtained from four environments (two different locations and two years). Forty-six markers associated with the number of bolls per plant (NB), boll weight (BW), lint percentage (LP), fiber length (FL), fiber strength (FS) and fiber micornaire value (FM) were repeatedly detected in at least two environments. Of 46 associated markers, 32 were identified as new association markers, and 14 had been previously reported in the literature. Nine association markers were near QTLs (at a distance of less than 1–2 LD decay on the reference map) that had been previously described. These results provide new useful markers for marker-assisted selection in breeding programs and new insights for understanding the genetic basis of Upland cotton yields and fiber quality traits at the whole-genome level.     

Characteristics and analysis of simple sequence repeats in the cotton genome based on a linkage map constructed from a BC1 population between Gossypium hirsutum and G. barbadense.

In the past decade, several molecular maps of cotton have been constructed using diverse DNA molecular markers and mapping populations. In this study, an interspecific linkage map of allotetraploid cotton was developed using a BC1 population ((Gossypium hirsutum x G. barbadense) x G. hirsutum). This map was genome-wide and was based entirely on simple sequence repeat (SSR) markers. Forty-four linkage groups were assigned to 26 chromosomes, with 917 loci spanning 5452.2 cM of the genome. The average distance between loci was 5.9 cM, providing uniform coverage of the A subgenome and D subgenome. Characteristics of this map were analyzed in detail, including the distributions of genomic SSRs, expressed sequence tag (EST)-SSRs, and distorted markers. Furthermore, the relationships between motif characteristics (size, type, length) and the level of polymorphism in EST-SSRs were also surveyed. The results showed that tetranucleotide and dinucleotide repeats had similar levels of polymorphism, and ACAT, AC, and ACT repeats had the highest polymorphism rates. Loci with lengths of 27 bp, 33 bp, and 24 bp were more likely to be polymorphic. This work will provide information to assist in designing future EST-SSRs.     

陆地棉遗传图谱构建与纤维品质性状QTL定位

以陆地棉(Gossypium hirsutum L.)品种Bar19/1和Acala1517-77杂交的108个F2单株为材料,应用85个标记(70个SSR标记和15个AFLP标记)构建了总长为814cM的遗传图谱,覆盖棉花基因组的18.3%。该图谱包含25个连锁群,分别对应到17条染色体和4个未知连锁群。应用复合区间作图法分析了该组合的108个F2单株和F3家系纤维品质性状,从遗传图谱上检测到19个纤维品质数量性状基因座(QTL),包括5个纤维长度、6个纤维比强度、4个伸长率及4个马克隆值QTL,分别解释各性状表型变异的15.11%~28.45%、8.46%~24.51%、11.08%~27.55%和9.23%~42.21%。纤维长度和伸长率的QTL以部分显性为主,少数具有超显性,比强度QTL以加性和部分显性为主,4个马克隆值QTL中有3个表现为超显性。研究结果表明,陆地棉Bar19/1和Acala1517-77间多态性位点丰富,有利于构建高密度遗传图谱,纤维品质性状的QTL分析从分子水平上揭示了纤维品质的遗传基础。     

Molecular mapping of QTLs for fiber qualities in three diverse lines in Upland cotton using SSR markers

The improvement of cotton fiber quality is extremely important because of changes in spinning technology. The identification of the stable QTLs affecting fiber traits across different generations will be greatly helpful to be used effectively in molecular marker-assisted selection to improve fiber quality of cotton cultivars in the future. Using three elite fiber lines of Upland cotton (Gossypium hirsutum L.) as parents, three linkage maps were constructed to tag QTLs for fiber qualities using SSR markers. There were 39 QTLs, 17 significant QTLs, LOD 3.0 and 22 suggestive QTLs, 3.0 > LOD 2.0, detected by composite interval mapping for fiber traits, in which 11 QTLs were for fiber length, 10 for fiber strength, 9 for micronaire and 9 for fiber elongation. Out of 17 significant QTLs, 5 QTLs with high logarithm of odds (LOD) score value and stable effect could be found in both F₂ and F_2:3 segregating populations, showing a great potential for molecular-assisted selection in improving fiber quality. At least three common QTLs could be identified in two populations. These common QTLs detected in different populations suggested that there existed elite fiber genes and possibly of the same origin. In addition, we found three pairs of putative homoeologous QTLs, qFL-7-1c and qFL-16-1c, qFS-D03-1a, qFS-A02-1b and qFS-A02-1c, and qFE–D03-1a and qFE-A02-1c. Our results provided a better understanding of the genetic factors of fiber traits in AD tetraploid cottons.     

Mapping QTLs for root traits in a recombinant inbred population from two indica ecotypes in rice

Evaluation of root traits in rainfed lowland rice is very difficult. Molecular genetic markers could be used as an alternative strategy to phenotypic selection for the improvement of rice root traits. This research was undertaken to map QTLs associated with five root traits using RFLP and AFLP markers. Recombinant inbred lines (RILs) were developed from two indica parents, IR58821–23-B-1–2-1 and IR52561-UBN-1–1-2, that were adapted to rainfed lowland production systems. Using wax-petrolatum layers to simulate a hardpan in the soil, 166 RILs were evaluated for total root number (TRN), penetrated root number (PRN), root penetration index (RPI, the ratio of PRN to TRN), penetrated root thickness (PRT) and penetrated root length (PRL) under greenhouse conditions during the summer and the fall of 1997. A genetic linkage map of 2022 cM length was constructed comprising 303 AFLP and 96 RFLP markers with an average marker space of 5.0 cM. QTL analysis via interval mapping detected 28 QTLs for these five root traits, which were located on chromosomes 1, 2, 3, 4, 6, 7, 10 and 11. Individual QTLs accounted for between 6 and 27% of the phenotypic variation. Most of the favorable alleles were derived from the parent IR58821–23-B-1–2-1, which was phenotypically superior in root traits related to drought resistance. Three out of six QTLs for RPI were detected in both summer and fall experiments and they also were associated with PRN in both experiments. Out of eight QTLs for RPT, five were common in both seasons. Two genomic regions on chromosome 2 were associated with three root traits (PRN, PRT and RPI), whereas three genomic regions on chromosomes 2 and 3 were associated with two root traits (PRT and RPI). Two QTLs affecting RPI and two QTLs affecting PRT were also found in similar genomic regions in other rice populations. The consistent QTLs across genetic backgrounds and the common QTLs detected in both experiments should be good candidates for marker-assisted selection toward the incorporation of root traits in a drought resistance breeding program, especially for rainfed lowland rice. Received: 17 November 1999 / Accepted: 19 March 2000     

QTL analysis of flower and fruit traits in sour cherry

The map locations and effects of quantitative trait loci (QTLs) were estimated for eight flower and fruit traits in sour cherry (Prunus cerasus L.) using a restriction fragment length polymorphism (RFLP) genetic linkage map constructed from a double pseudo-testcross. The mapping population consisted of 86 progeny from the cross between two sour cherry cultivars, Rheinische Schattenmorelle (RS)×Erdi Botermo (EB). The genetic linkage maps for RS and EB were 398.2 cM and 222.2 cM, respectively, with an average interval length of 9.8 cM. The RS/EB linkage map that was generated with shared segregating markers consisted of 17 linkage groups covering 272.9 cM with an average interval length of 4.8 cM. Eleven putatively significant QTLs (LOD >2.4) were detected for six characters (bloom time, ripening time, % pistil death, % pollen germination, fruit weight, and soluble solids concentration). The percentage of phenotypic variation explained by a single QTL ranged from 12.9% to 25.9%. Of the QTLs identified for the traits in which the two parents differed significantly, 50% had allelic effects opposite to those predicted from the parental phenotype. Three QTLs affecting flower traits (bloom time, % pistil death, and % pollen germination) mapped to a single linkage group, EB 1. The RFLP closest to the bloom time QTL on EB 1 was detected by a sweet cherry cDNA clone pS141 whose partial amino acid sequence was 81% identical to that of a Japanese pear stylar RNase. Received: 4 March 1999 / Accepted: 27 August 1999     

Construction of microsatellite-based linkage map and mapping of nectarilessness and hairiness genes in Gossypium tomentosum

Gossypium tomentosum, a wild tetraploid cotton species with AD genomes, possesses genes conferring strong fibers and high heat tolerance. To effectively transfer these genes into Gossypium hirsutum, an entire microsatellite (simple sequence repeat, SSR)-based genetic map was constructed using the interspecific cross of G. hirsutum × G. tomentosum (HT). We detected 1800 loci from 1347 pairs of polymorphic primers. Of these, 1204 loci were grouped into 35 linkage groups at LOD?≥?4. The map covers 3320.8 cM, with a mean density of 2.76 cM per locus. We detected 420 common loci (186 in the At subgenome and 234 in Dt) between the HT map and the map of TM-1 (G. hirsutum) and Hai 7124 (G. barbadense; HB map). The linkage groups were assigned chromosome numbers based on location of common loci and the HB map as reference. A comparison of common markers revealed that no significant chromosomal rearrangement exist between G. tomentosum and G. barbadense. Interestingly, however, we detected numerous (33.7%) segregation loci deviating from 3:1 ratio (P?<?0.05) in HT, mostly clustering on eight chromosomes in the Dt subgenome, with some on three chromosomes in At. Two morphological traits, leaf hairiness and leaf nectarilessness were mapped on chromosomes 6 (A6) and 26 (D12), respectively. The SSR-based map constructed in this study will be useful for further genetic studies on cotton breeding, including mapping loci controlling quantitative traits associated with fiber quality, stress tolerance and developing chromosome segment specific introgression lines from G. tomentosum into G. hirsutum using marker-assisted selection.     

An integrative genetic linkage map of winter wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

We constructed a genetic linkage map based on a cross between two Swiss winter wheat (Triticum aestivum L.) varieties, Arina and Forno. Two-hundred and forty F₅ single-seed descent (SSD)-derived lines were analysed with 112 restriction fragment length polymorphism (RFLP) anonymous probes, 18 wheat cDNA clones coding for putative stress or defence-related proteins and 179 simple-sequence repeat (SSR) primer-pairs. The 309 markers revealed 396 segregating loci. Linkage analysis defined 27 linkage groups that could all be assigned to chromosomes or chromosome arms. The resulting genetic map comprises 380 loci and spans 3,086 cM with 1,131 cM for the A genome, 920 cM for the B genome and 1,036 cM for the D genome. Seventeen percent of the loci showed a significant (P < 0.05) deviation from a 1:1 ratio, most of them in favour of the Arina alleles. This map enabled the mapping of QTLs for resistance against several fungal diseases such as Stagonospora glume blotch, leaf rust and Fusarium head blight. It will also be very useful for wheat genetic mapping, as it combines RFLP and SSR markers that were previously located on separate maps. S. Paillard and T. Schnurbusch contributed equally to the work     

Genetic analysis of Verticillium wilt resistance in a backcross inbred line population and a meta-analysis of quantitative trait loci for disease resistance in cotton

Background

Verticillium wilt (VW) and Fusarium wilt (FW), caused by the soil-borne fungi Verticillium dahliae and Fusarium oxysporum f. sp. vasinfectum, respectively, are two most destructive diseases in cotton production worldwide. Root-knot nematodes (Meloidogyne incognita, RKN) and reniform nematodes (Rotylenchulus reniformis, RN) cause the highest yield loss in the U.S. Planting disease resistant cultivars is the most cost effective control method. Numerous studies have reported mapping of quantitative trait loci (QTLs) for disease resistance in cotton; however, very few reliable QTLs were identified for use in genomic research and breeding.

Results

This study first performed a 4-year replicated test of a backcross inbred line (BIL) population for VW resistance, and 10 resistance QTLs were mapped based on a 2895 cM linkage map with 392 SSR markers. The 10 VW QTLs were then placed to a consensus linkage map with other 182 VW QTLs, 75 RKN QTLs, 27 FW QTLs, and 7 RN QTLs reported from 32 publications. A meta-analysis of QTLs identified 28 QTL clusters including 13, 8 and 3 QTL hotspots for resistance to VW, RKN and FW, respectively. The number of QTLs and QTL clusters on chromosomes especially in the A-subgenome was significantly correlated with the number of nucleotide-binding site (NBS) genes, and the distribution of QTLs between homeologous A- and D- subgenome chromosomes was also significantly correlated.

Conclusions

Ten VW resistance QTL identified in a 4-year replicated study have added useful information to the understanding of the genetic basis of VW resistance in cotton. Twenty-eight disease resistance QTL clusters and 24 hotspots identified from a total of 306 QTLs and linked SSR markers provide important information for marker-assisted selection and high resolution mapping of resistance QTLs and genes. The non-overlapping of most resistance QTL hotspots for different diseases indicates that their resistances are controlled by different genes.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1682-2) contains supplementary material, which is available to authorized users.