Variation in enamel development of South African fossil hominids

Dental tissues provide important insights into aspects of hominid palaeobiology that are otherwise difficult to obtain from studies of the bony skeleton. Tooth enamel is formed by ameloblasts, which demonstrate daily secretory rhythms developing tissue-specific structures known as cross striations, and longer period markings called striae of Retzius. These enamel features were studied in the molars of two well known South African hominid species, Australopithecus africanus and Paranthropus robustus. Using newly developed portable confocal microscopy, we have obtained cross striation periodicities (number of cross striations between adjacent striae) for the largest sample of hominid teeth reported to date. These data indicate a mean periodicity of seven days in these small-bodied hominids. Important differences were observed in the inferred mechanisms of enamel development between these taxa. Ameloblasts maintain high rates of differentiation throughout cervical enamel development in P. robustus but not in A. africanus. In our sample, there were fewer lateral striae of Retzius in P. robustus than in A. africanus. In a molar of P. robustus, lateral enamel formed in a much shorter time than cuspal enamel, and the opposite was observed in two molars of A. africanus. In spite of the greater occlusal area and enamel thickness of the molars of both fossil species compared with modern humans, the total crown formation time of these three fossil molars was shorter than the corresponding tooth type in modern humans. Our results provide support for previous conclusions that molar crown formation time was short in Plio-Pleistocene hominids, and strongly suggest the presence of different mechanisms of amelogenesis, and thus tooth development, in these taxa.     

Computed tomography and enamel thickness of maxillary molars of Plio-Pleistocene hominids from Sterkfontein, Swartkrans, and Kromdraai (South Africa): An exploratory study.

This paper is one in a series which explores the possibility of using the non-destructive CT technique to identify patterns in tooth enamel distribution and structure of hominid molars from Plio-Pleistocene sites in South Africa, notably Swartkrans, Sterkfontein, and Kromdraai. Whereas previous investigators have emphasised gross differences in absolute and relative or average enamel thickness between hominid taxa, the present study highlights differences in enamel thickness over functionally significant regions of the crown. Differences in the distribution of enamel in A. robustus, A. africanus, and Homo sp. are identified through the use of bivariate and multivariate analyses, and are interpreted in terms of dietary regimes.     

Molar enamel thickness and dentine horn height in Gigantopithecus blacki

Absolutely thick molar enamel is consistent with large body size estimates and dietary inferences about Gigantopithecus blacki, which focus on tough or fibrous vegetation. In this study, 10 G. blacki molars demonstrating various stages of attrition were imaged using high-resolution microtomography. Three-dimensional average enamel thickness and relative enamel thickness measurements were recorded on the least worn molars within the sample (n = 2). Seven molars were also virtually sectioned through the mesial cusps and two-dimensional enamel thickness and dentine horn height measurements were recorded. Gigantopithecus has the thickest enamel of any fossil or extant primate in terms of absolute thickness. Relative (size-scaled) measures of enamel thickness, however, support a thick characterization (i.e., not "hyper-thick"); G. blacki relative enamel thickness overlaps slightly with Pongo and completely with Homo. Gigantopithecus blacki dentine horns are relatively short, similar to (but shorter than) those of Pongo, which in turn are shorter than those of humans and African apes. Gigantopithecus blacki molar enamel (and to a lesser extent, that of Pongo pygmaeus) is distributed relatively evenly across the occlusal surface compared with the more complex distribution of enamel thickness in Homo sapiens. The combination of evenly distributed occlusal enamel and relatively short dentine horns in G. blacki results in a flat and low-cusped occlusal surface suitable to grinding tough or fibrous food objects. This suite of molar morphologies is also found to varying degrees in Pongo and Sivapithecus, but not in African apes and humans, and may be diagnostic of subfamily Ponginae.     

Enamel-dentine junction (EDJ) morphology distinguishes the lower molars of Australopithecus africanus and Paranthropus robustus

Tooth crown morphology plays a central role in hominin systematics, but the removal of the original outer enamel surface by dental attrition often eliminates from consideration the type of detailed crown morphology that has been shown to discriminate among hominin taxa. This reduces the size of samples available for study. The enamel-dentine junction (EDJ) is the developmental precursor and primary contributor to the morphology of the unworn outer enamel surface, and its morphology is only affected after considerable attrition. In this paper, we explore whether the form of the EDJ can be used to distinguish between the mandibular molars of two southern African fossil hominins: Paranthropus (or Australopithecus) robustus and Australopithecus africanus. After micro-computed tomographic scanning the molar sample, we made high-resolution images of the EDJ and used geometric morphometrics to compare EDJ shape differences between species, in addition to documenting metameric variation along the molar row within each species. Landmarks were collected along the marginal ridge that runs between adjacent dentine horns and around the circumference of the cervix. Our results suggest that the morphology of the EDJ can distinguish lower molars of these southern African hominins, and it can discriminate first, second, and third molars within each taxon. These results confirm previous findings that the EDJ preserves taxonomically valuable shape information in worn teeth. Mean differences in EDJ shape, in particular dentine horn height, crown height, and cervix shape, are more marked between adjacent molars within each taxon than for the same molar between the two taxa.     

The eruption pattern of the permanent incisors and first permanent molars in Australopithecus (Paranthropus) robustus

This study aims to reassess the claim that the eruption sequence of the permanent incisor and first permanent molar teeth of Australopithecus (Paranthropus) robustus is identical with that in modern Homo sapiens. Eight fossil hominid mandibles of equivalent dental developmental age were chosen for comparative study. Emphasis has been placed upon the comparative timing of events within the growth period rather than eruption sequence alone. The results of this study indicate that Homo sapiens and Australopithecus (Paranthropus) robustus share the same pattern of permanent molar and incisor eruption and that this is significantly different from the pattern of eruption shared by the great apes, Australopithecus africanus and Australopithecus afarensis.     

Hard-object feeding in sooty mangabeys (Cercocebus atys) and interpretation of early hominin feeding ecology

Morphology of the dentofacial complex of early hominins has figured prominently in the inference of their dietary adaptations. Recent theoretical analysis of craniofacial morphology of Australopithecus africanus proposes that skull form in this taxon represents adaptation to feeding on large, hard objects. A modern analog for this specific dietary specialization is provided by the West African sooty mangabey, Cercocebus atys. This species habitually feeds on the large, exceptionally hard nuts of Sacoglottis gabonensis, stereotypically crushing the seed casings using their premolars and molars. This type of behavior has been inferred for A. africanus based on mathematical stress analysis and aspects of dental wear and morphology. While postcanine megadontia, premolar enlargement and thick molar enamel characterize both A. africanus and C. atys, these features are not universally associated with durophagy among living anthropoids. Occlusal microwear analysis reveals complex microwear textures in C. atys unlike those observed in A. africanus, but more closely resembling textures observed in Paranthropus robustus. Since sooty mangabeys process hard objects in a manner similar to that proposed for A. africanus, yet do so without the craniofacial buttressing characteristic of this hominin, it follows that derived features of the australopith skull are sufficient but not necessary for the consumption of large, hard objects. The adaptive significance of australopith craniofacial morphology may instead be related to the toughness, rather than the hardness, of ingested foods.     

陕西公王岭蓝田直立人内耳迷路的复原及形态特点

1964年在陕西公王岭发现的蓝田人头骨的形态比周口店直立人和印度尼西亚爪哇直立人原始,其厚重的骨壁及较小的脑量,落入了早期人属成员的变异范围。最新测年结果将蓝田人的生存年代从原先普遍接受的距今115万年提早到大约163万年前,接近能人和南方古猿生存年代变异范围的下限,蓝田人是迄今为止我国发现的有确定年代数据的最早的古人类化石。本文采用高分辨率CT技术对蓝田人的颞骨岩部进行了扫描,对骨性内耳迷路进行了3D虚拟复原,通过与和县直立人、欧洲古老型智人、早期人属成员、南方古猿非洲种、粗壮傍人和现代人内耳迷路的21项测量项目的对比和分析,结果显示蓝田人内耳迷路的测量数据与南方古猿非洲种最接近,其次为现代人和欧洲古老型智人,而与早期人属成员和粗壮傍人相差较大。主成分分析结果显示,蓝田人内耳迷路与早期人属成员、欧洲古老型智人、南方古猿非洲种及现代人都有重叠区域,距离最近的是南方古猿非洲种Sts 5,其次为和县直立人和南方古猿非洲种Sts 19,而与粗壮傍人距离较远。本文研究提供了中更新世中国古人类内耳迷路的形态数据,为进一步探讨蓝田人体质特征演化上的意义提供了参考资料。     

Dental tissue proportions and enamel thickness in Neandertal and modern human molars

The thickness of dental enamel is often discussed in paleoanthropological literature, particularly with regard to differences in growth, health, and diet between Neandertals and modern humans. Paleoanthropologists employ enamel thickness in paleodietary and taxonomic studies regarding earlier hominins, but variation in enamel thickness within the genus Homo has not been thoroughly explored despite its potential to discriminate species and its relevance to studies of growth and development. Radiographic two-dimensional studies indicate that Neandertal molar enamel is thin relative to the thick enamel of modern humans, although such methods have limited accuracy. Here we show that, measured via accurate high-resolution microtomographic imaging, Neandertal molar enamel is absolutely and relatively thinner than modern human enamel at most molar positions. However, this difference relates to the ratio of coronal dentine volume to total crown volume, rather than the quantity of enamel per se. The absolute volume of Neandertal molar enamel is similar to that of modern humans, but Neandertal enamel is deposited over a larger volume of coronal dentine, resulting in lower average (and relative) enamel thickness values. Sample sizes do not permit rigorous intragroup comparisons, but Neandertal molar tissue proportions evince less variation than the modern human sample. Differences in three- and two-dimensional enamel thickness data describing Neandertal molars may be explained by dimensional reduction. Although molar tissue proportions distinguish Neanderthals from recent Homo sapiens, additional study is necessary to assess trends in tissue proportions in the genus Homo throughout the Pleistocene.     

Brief communication: enamel thickness trends in the dental arcade of humans and chimpanzees

In addition to evidence for bipedality in some fossil taxa, molar enamel thickness is among the few characters distinguishing (thick-enameled) hominins from the (thin-enameled) African apes. Despite the importance of enamel thickness in taxonomic discussions and a long history of scholarship, measurements of enamel thickness are performed almost exclusively on molars, with relatively few studies examining premolars and anterior teeth. This focus on molars has limited the scope of enamel thickness studies (i.e., there exist many fossil hominin incisors, canines, and premolars). Increasing the available sample of teeth from which to compare enamel thickness measurements from the fossil record could substantially increase our understanding of this aspect of dental biology, and perhaps facilitate greater taxonomic resolution of early hominin fossils. In this study, we report absolute and relative (size-scaled) enamel thickness measurements for the complete dentition of modern humans and chimpanzees. In accord with previous studies of molars, chimpanzees show lower relative enamel thickness at each tooth position, with little overlap between the two taxa. A significant trend of increasing enamel thickness from anterior to posterior teeth is apparent in both humans and chimpanzees, indicating that inter-taxon comparisons should be limited to the same tooth position in order to compare homologous structures. As nondestructive imaging techniques become commonplace (facilitating the examination of increasing numbers of fossil specimens), studies may maximize available samples by expanding beyond molars.     

巨猿牙齿釉质厚度及对食性适应与系统演化的意义

步氏巨猿(Gigantopithecus blacki)是更新世时期生活于我国华南地区的一种超大型猿类, 它的体态特征和演化分类倍受关注。牙齿釉质厚度在探讨灵长类食性、环境适应以及系统演化方面具有重要意义。本文利用显微CT技术构建18颗巨猿臼齿虚拟模型, 测量其釉质厚度。将巨猿釉质厚度与现代人、现生类人猿、古人类、中新世古猿及其他现生灵长类进行比较, 从牙齿釉质厚度探讨巨猿的食性适应和系统演化问题。结果发现巨猿的实测釉质厚度是目前所有已知现生和化石灵长类中最厚的, 只有傍人、南非早期人属及奥兰诺古猿三种化石灵长类与之接近; 如果考虑不同物种牙齿与身体大小的关联因素, 相对釉质厚度指数显示巨猿属于"厚"釉质类型, 但非"超厚"类型, 低于奥兰诺古猿、傍人、南非早期人属; 巨猿与某些中新世古猿 (如原康修尔猿尼安萨种、非洲古猿)、南方古猿、东非早期人属、亚洲直立人以及现代人、现生卷尾猴的相对釉质厚度指数相近。巨猿的厚釉质特征与其食性和环境适应密切相关, 使得牙齿具有非常强的抗磨损功能, 能够适应长时间的咀嚼和研磨食物。从釉质厚度的系统演化角度推测, 厚釉质应该是人类祖先的特征性状, 巨猿有可能是早期人类支系演化过程中的一个特化旁支, 同时也不排除巨猿是从某种具有厚釉质的中新世古猿旁支平行演化而来的可能性。     

Enamel thickness of deciduous and permanent molars in modern Homo sapiens

This study presents data on the enamel thickness of deciduous (dm2) and permanent (M1-M3) molars for a geographically diverse sample of modern humans. Measurements were recorded from sections through the mesial cusps of unworn teeth. Enamel is significantly thinner on deciduous than on permanent molars, and there is a distinct trend for enamel to increase in relative thickness from M1 to M3. The relatively thicker enamel of M2s and especially M3s can be related to the overall reduction in size of more distal molar crowns, which has been attained through a differential loss of the dentine component. Enamel tends to be thicker on the protocone than on the paracone, and thicker on the protoconid than on the metaconid, but its distribution is not wholly concordant with models that predict increased thickness as a means by which to counter heavier attritional loss on these "functional" cusps. Indeed, the thickness of enamel tends to be more variable on cusp tips and occlusal surfaces than over the lateral aspects of cusps. The proportionately thicker enamel over the lateral aspects of the protocone and protoconid more likely serves as a means to prolong functional crown life by preventing cusp fracture, rather than being an adaptation to increase the attritional longevity of wear facets. The present data suggest that the human dentition is not predisposed to develop a helicoidal wear plane through the disposition of molar enamel thickness.     

Three-dimensional primate molar enamel thickness

Molar enamel thickness has played an important role in the taxonomic, phylogenetic, and dietary assessments of fossil primate teeth for nearly 90 years. Despite the frequency with which enamel thickness is discussed in paleoanthropological discourse, methods used to attain information about enamel thickness are destructive and record information from only a single plane of section. Such semidestructive planar methods limit sample sizes and ignore dimensional data that may be culled from the entire length of a tooth. In light of recently developed techniques to investigate enamel thickness in 3D and the frequent use of enamel thickness in dietary and phylogenetic interpretations of living and fossil primates, the study presented here aims to produce and make available to other researchers a database of 3D enamel thickness measurements of primate molars (n=182 molars). The 3D enamel thickness measurements reported here generally agree with 2D studies. Hominoids show a broad range of relative enamel thicknesses, and cercopithecoids have relatively thicker enamel than ceboids, which in turn have relatively thicker enamel than strepsirrhine primates, on average. Past studies performed using 2D sections appear to have accurately diagnosed the 3D relative enamel thickness condition in great apes and humans: Gorilla has the relatively thinnest enamel, Pan has relatively thinner enamel than Pongo, and Homo has the relatively thickest enamel. Although the data set presented here has some taxonomic gaps, it may serve as a useful reference for researchers investigating enamel thickness in fossil taxa and studies of primate gnathic biology.     

An examination of dental development in Graecopithecus freybergi (=Ouranopithecus macedoniensis)

This study examined enamel thickness and dental development in Graecopithecus freybergi (=Ouranopithecus macedoniensis), a late Miocene hominoid from Greece. Comparative emphasis was placed on Proconsul, Afropithecus, Dryopithecus, Lufengpithecus, and Gigantopithecus, fossil apes that vary in enamel thickness and patterns of development. In addition, comparisons were made with Paranthropus to investigate reported similarities in enamel thickness. Several sections of a right lower third molar were generated, from which enamel thickness and aspects of the enamel and dentine microstructure were determined. Data from parallel sections shed light on the effects of section obliquity, which may influence determination of both enamel thickness and crown formation time. Graecopithecus has relatively thick enamel, greater than any fossil ape but less than Paranthropus, with which it does show similarity in prism path and Hunter-Schreger band morphology. Aspects of enamel microstructure, including the periodicity and daily secretion rate, are similar to most extant and fossil apes, especially Afropithecus. Total crown formation time was estimated to be 3.5 years, which is greater than published values for modern Homo, similar to Pan, and less than Gigantopithecus. Data on dentine secretion and extension rates suggest that coronal dentine formation was relatively slow, but comparative data are very limited. Graecopithecus shares a crown formation pattern with several thick-enamelled hominoids, in which cuspal enamel makes up a very large portion of crown area, is formed by a large cell cohort, and is formed in less than half of the total time of formation. In Paranthropus, this pattern appears to be even more extreme, which may result in thicker enamel formed in an even shorter time. Developmental similarities between Paranthropus and Graecopithecus are interpreted to be parallelisms due to similarities in the mechanical demands of their diets.     

Enamel microstructure of the hominid KB 5223 from Kromdraai, South Africa

The Plio-Pleistocene site of Kromdraai, South Africa, is well known for the recovery of the holotype of Paranthropus robustus, one of nine individual hominids recovered from this site to date. Among the Kromdraai sample, the specimen KB 5223 comprises several isolated deciduous and permanent lower teeth assigned to Paranthropus, the only recognized genus at this site. However, a more recent analysis of this specimen suggested that it should be classified as Homo. The lower right first permanent molar of KB 5223 had been previously sectioned along the tips of the mesial cusps, exposing its enamel microstructure. Previous studies had indicated differences between Homo and Paranthropus at the microstructural level. A portable confocal scanning microscope was used to describe details of the enamel microstructure of the M1 and I1 of this specimen. Angles formed between the striae of Retzius and the enamel dentine junction (EDJ), daily secretion rates in cuspal enamel of the protoconid and metaconid and crown formation time of the RM1 are provided. The number of perikymata on the right I1 was counted. Results indicate that some features recorded in the KB 5223 molar differ from those of Paranthropus. However, the number of perikymata on the I1 is lower than values so far reported for early Homo but similar to Paranthropus. Crown formation time of KB 5223 M1 was markedly lower than mean values of M1 in H. sapiens, but similar to other early hominids. Daily secretion rates in the cuspal enamel of KB 5223 M1 were higher than in modern humans.     

The isotopic ecology of African mole rats informs hypotheses on the evolution of human diet

The diets of Australopithecus africanus and Paranthropus robustus are hypothesized to have included C4 plants, such as tropical grasses and sedges, or the tissues of animals which themselves consumed C4 plants. Yet inferences based on the craniodental morphology of A. africanus and P. robustus indicate a seasonal diet governed by hard, brittle foods. Such mechanical characteristics are incompatible with a diet of grasses or uncooked meat, which are too tough for efficient mastication by flat, low-cusped molars. This discrepancy, termed the C4 conundrum, has led to the speculation that C4 plant underground storage organs (USOs) were a source of nutrition for hominin species. We test this hypothesis by examining the isotopic ecology of African mole rats, which consume USOs extensively. We measured delta18O and delta13C of enamel and bone apatite from fossil and modern species distributed across a range of habitats. We show that delta18O values vary little and that delta13C values vary along the C3 to C4/CAM-vegetative axis. Relatively high delta13C values exist in modern Cryptomys hottentotus natalensis and Cryptomys spp. recovered from hominin-bearing deposits. These values overlap those reported for A. africanus and P. robustus and we conclude that the USO hypothesis for hominin diets retains certain plausibility.     

Principal components analysis of distal humeral shape in Pliocene to recent African hominids: the contribution of geometric morphometrics

The shape of the distal humerus in Homo, Pan (P. paniscus and P. troglodytes), Gorilla, and six australopithecines is compared using a geometric approach (Procrustes superimposition of landmarks). Fourteen landmarks are defined on the humerus in a two-dimensional space. Principal components analysis (PCA) is performed on all superimposed coordinates. I have chosen to discuss the precise place of KNM-KP 271 variously assigned to Australopithecus anamensis, Homo sp., or Praeanthropus africanus, in comparison with a sample of australopithecines. AL 288-1, AL 137-48 (Hadar), STW 431 (Sterkfontein), and TM 1517 (Kromdraai) are commonly attributed to Australopithecus afarensis (the two former), Australopithecus africanus, and Paranthropus robustus, respectively, while the taxonomic place of KNM-ER 739 (Homo or Paranthropus?) is not yet clearly defined. The analysis does not emphasize a particular affinity between KNM-KP 271 and modern Homo, nor with A. afarensis, as previously demonstrated (Lague and Jungers [1996]     

Compact bone distribution and biomechanics of early hominid mandibles.

This investigation explores the effects of compact bone distribution on the biomechanical properties of the postcanine mandibular corpus of the fossil hominid taxa Australopithecus africanus and Paranthropus robustus. The mandibles of extant great apes, modern humans, and the fossil hominids are examined by computed tomography (CT), and compact bone contours are used to calculate cross-sectional biomechanical properties (cortical area, second moments of area, and Bredt's formula for torsional strength). The relative amount of compact bone is comparable in the modern and fossil mandibles, but the mechanical properties of A. africanus and P. robustus jaws are distinct in terms of the ratio of minimum to maximum second moments of area. This difference most likely represents a structural response to elevated torsional moments in the fossil hominids. Although the relative amount of compact bone in cross-section does not differ significantly between taxa by statistical criteria, A. africanus utilizes less cortical bone than P. robustus in the same manner in which Pongo is separated from the condition in other extant large-bodied hominoids. It has been suggested that the phenomenon of mandibular "robusticity" (expressed as an index of corpus breadth/corpus height) may be an effect of postcanine megadontia and/or reduced canine size in the australopithecines. Results presented here, however, indicate that it is unlikely that either factor adequately accounts for mandibular size and shape variation in early hominids.     

Molar enamel thickness in the chacma baboon, Papio ursinus (Kerr 1792)

Modern humans exhibit increasing relative enamel thickness from M1 to M3. Some biomechanical (basic lever) models predict that the more distal molars in humans encounter higher occlusal forces, and it has been postulated that this provides a functional explanation for the observed gradient in relative enamel thickness. However, constrained three-dimensional models and experimental observations suggest that there is a reduction in bite force potential from M1 to M3, which would be consistent with the tendency for humans to reduce the size of the distal molars. In this regard, it has been postulated that the distal increase in enamel thickness is a consequence of crown size reduction; thus, it is unnecessary to invoke functional scenarios to explain this phenomenon. We assess these competing proposals by examining relative enamel thickness in a catarrhine primate (Papio ursinus) that exhibits crown size increase from M1 to M3. The molar row of P. ursinus is positioned relatively far forward of the temporomandibular joint, which results in the baboon being able to exert relatively greater muscle forces during posterior biting in comparison to modern humans. Thus, a significant distalward gradient of increasing enamel thickness would be expected in P. ursinus according to the hypothesis that posits it to be functionally related to bite force. The present study reveals no significant difference in relative enamel thickness along the molar row in P. ursinus. This finding lends support to the notion that the relatively thicker enamel of human distal molars is related primarily to their reduction in size. This carries potential implications for the interpretation of enamel thickness in phylogenetic reconstructions: the relatively thick molar enamel shared by modern humans and some of our fossil relatives may not be strictly homologous, in that it may result from different underlying developmental mechanisms.     

广西化石猩猩牙齿釉质厚度研究

华南和东南亚发现大量更新世的猩猩牙齿化石。本研究应用CT扫描三维重建的技术方法研究了广西更新世化石猩猩牙齿釉质厚度,并与现生类人猿、现代人、化石类人猿以及早期人类进行比较分析。结果显示:广西猩猩同类牙齿的釉质厚度与牙齿大小相关性很小;臼齿和前臼齿釉质厚度在上下颌之间不存在显著性差异;来自广西不同地区的猩猩化石牙釉质厚度无显著差异。与早期人科成员相比,广西猩猩的牙釉质相对较薄,平均与相对釉质厚度值都明显小于南方古猿、傍人。与早期人属相比,小于直立人、尼人以及非洲和欧洲的早期人属化石。与现代人和现生灵长类相比,广西化石猩猩釉质厚度明显大于大部分猴类和非洲大猿;平均釉质厚度稍大于现生猩猩,而与现代人更为接近;相对釉质厚度小于现代人,而与现生猩猩差异不大,都属于偏厚型釉质。本文讨论了釉质厚度与系统分类演化、食性适应的相关问题,作者推测釉质厚度可能是物种的特征属性,与牙齿功能适应有密切关联。     

Brief communication: dental development and enamel thickness in the Lakonis Neanderthal molar

Developmental and structural affinities between modern human and Neanderthal dental remains continue to be a subject of debate as well as their utility for informing assessments of life history and taxonomy. Excavation of the Middle Paleolithic cave site Lakonis in southern Greece has yielded a lower third molar (LKH 1). Here, we detail the crown development and enamel thickness of the distal cusps of the LKH 1 specimen, which has been classified as a Neanderthal based on the presence of an anterior fovea and mid-trigonid crest. Crown formation was determined using standard histological techniques, and enamel thickness was measured from a virtual plane of section. Developmental differences include thinner cuspal enamel and a lower periodicity than modern humans. Crown formation in the LKH 1 hypoconid is estimated to be 2.6-2.7 years, which is shorter than modern human times. The LKH 1 hypoconid also shows a more rapid overall crown extension rate than modern humans. Relative enamel thickness was approximately half that of a modern human sample mean; enamel on the distal cusps of modern human third molars is extremely thick in absolute and relative terms. These findings are consistent with recent studies that demonstrate differences in crown development, tissue proportions, and enamel thickness between Neanderthals and modern humans. Although overlap in some developmental variables may be found, the results of this and other studies suggest that Neanderthal molars formed in shorter periods of time than modern humans, due in part to thinner enamel and faster crown extension rates.