A New Pathway for Poly(3-hydroxybutyrate) Production in Escherichia coli and Corynebacterium glutamicum by Functional Expression of a New Acetoacetyl-coenzyme A Synthase

A biosynthetic pathway for poly(3-hydroxybutyrate) [P(3HB)] was developed in Escherichia coli and Corynebacterium glutamicum by an acetoacetyl-coenzyme A (CoA) synthase (AACS) recently isolated from terpenoid-producing Streptomyces sp. strain CL190. Expression of AACS led to significant productions of P(3HB) in E. coli (10.5 wt %) and C. glutamicum (19.7 wt %).     

Molecular characterisation of phaCAB from Comamonas sp. EB172 for functional expression in Escherichia coli JM109

In this study, PHA biosynthesis operon of Comamonas sp. EB172, an acid-tolerant strain, consisting of three genes encoding acetyl-CoA acetyltransferase (phaA(Co) gene, 1182bp), acetoacetyl-CoA reductase (phaB(Co) gene, 738bp) and PHA synthase, class I (phaC(Co) gene, 1694bp) were identified. Sequence analysis of the phaA(Co), phaB(Co) and phaC(Co) genes revealed that they shared more than 85%, 89% and 69% identity, respectively, with orthologues from Delftia acidovorans SPH-1 and Acidovorax ebreus TPSY. The PHA biosynthesis genes (phaC(Co) and phaAB(Co)) were successfully cloned in a heterologous host, Escherichia coli JM109. E. coli JM109 transformants harbouring pGEM'-phaC(Co)AB(Re) and pGEM'-phaC(Re)AB(Co) were shown to be functionally active synthesising 33wt.% and 17wt.% of poly(3-hydroxybutyrate) [P(3HB)]. E. coli JM109 transformant harbouring the three genes from the acid-tolerant Comamonas sp. EB172 (phaCAB(Co)) under the control of native promoter from Cupriavidus necator, in vivo polymerised P(3HB) when fed with glucose and volatile mixed organic acids (acetic acid:propionic acid:n-butyric acid) in ration of 3:1:1, respectively. The E. coli JM109 transformant harbouring phaCAB(Co) could accumulate P(3HB) at 2g/L of propionic acid. P(3HB) contents of 40.9% and 43.6% were achieved by using 1% of glucose and mixed organic acids, respectively.     

A C-terminal deletion in Corynebacterium glutamicum homoserine dehydrogenase abolishes allosteric inhibition by L-threonine.

In Escherichia coli, Bacillus subtilis and Corynebacterium glutamicum, homoserine dehydrogenase (HD), the enzyme after the branch point of the threonine/methionine and lysine biosynthetic pathways, is allosterically inhibited by L-threonine. To investigate the regulation of the C. glutamicum HD enzyme by L-threonine, the structural gene, hom, was mutated by UV irradiation of whole cells to obtain a deregulated allele, homdr. L-Threonine inhibits the wild-type (wt) enzyme with a Ki of 0.16 mM. The deregulated enzyme remains 80% active in the presence of 50 mM L-threonine. The homdr gene mutant was isolated and cloned in E. coli. In a C. glutamicum wt host background, but not in E. coli, the cloned homdr gene is genetically unstable. The cloned homdr gene is overexpressed tenfold in C. glutamicum and is active in the presence of over 60 mM L-threonine. Sequence analysis revealed that the homdr mutation is a single nucleotide (G1964) deletion in codon 429 within the hom reading frame. The resulting frame-shift mutation radically alters the structure of the C terminus, resulting in ten amino acid (aa) changes and a deletion of the last 7 aa relative to the wt protein. These observations suggest that the C terminus may be associated with the L-threonine allosteric response. The homdr mutation is unstable and probably deleterious to the cell. This may explain why only one mutation was obtained despite repeated mutagenesis.     

Synergistic effects of Glu130Asp substitution in the type II polyhydroxyalkanoate (PHA) synthase: enhancement of PHA production and alteration of polymer molecular weight

In vitro evolution of the polyhydroxyalkanoate (PHA) synthase gene from Pseudomonas sp. 61-3 (phaC1(Ps)) has been performed to generate highly active enzymes. In this study, a positive mutant of PHA synthase, Glu130Asp (E130D), was characterized in detail in vivo and in vitro. Recombinant Escherichia coli strain JM109 harboring the E130D mutant gene accumulated 10-fold higher (1.0 wt %) poly(3-hydroxybutyrate) [P(3HB)] from glucose, compared to recombinant E. coli harboring the wild-type PHA synthase gene (0.1 wt %). Recombinant E. coli strain LS5218 harboring the E130D PHA synthase gene grown on dodecanoate produced more poly(3HB-co-3-hydroxyalkanoate) [P(3HB-co-3HA)] (20 wt %) copolymer than an LS5218 strain harboring the wild-type PHA synthase gene (13 wt %). The E130D mutation also resulted in the production of copolymer with a slight increase in 3HB composition, compared to copolymer produced by the wild-type PHA synthase. In vitro enzyme activities of the E130D PHA synthase toward various 3-hydroxyacyl-CoAs (4-10 carbons in length) were all higher than those of the wild-type enzyme. The combination of the E130D mutation with other beneficial mutations, such as Ser325Thr and Gln481Lys, exhibited a synergistic effect on in vivo PHA production and in vitro enzyme activity. Interestingly, gel-permeation chromatography analysis revealed that the E130D mutation also had a synergistic effect on the molecular weight of polymers produced in vivo.     

Efficient and economical recovery of poly(3-hydroxybutyrate) from recombinant Escherichia coli by simple digestion with chemicals

A simple method for the recovery of microbial poly(3-hydroxybutyrate) [P(3HB)] from recombinant Escherichia coli harboring the Ralstonia eutropha PHA biosynthesis genes was developed. Various acids (HCl, H2SO4), alkalies (NaOH, KOH, and NH4OH), and surfactants (dioctylsulfosuccinate sodium salt [AOT], hexadecyltrimethylammonium bromide [CTAB], sodium dodecylsulfate [SDS], polyoxyethylene-p-tert-octylphenol [Triton X-100], and polyoxyethylene(20)sorbitan monolaurate [Tween 20]) were examined for their ability to digest non-P(3HB) cellular materials (NPCM). Even though SDS was an efficient chemical for P(3HB) recovery from recombinant E. coli, it is expensive and has waste disposal problem. NaOH and KOH were also efficient and economical for the recovery of P(3HB), and therefore, were used to optimize digestion condition. When 50 g DCW/L of recombinant E. coli cells having the P(3HB) content of 77% was treated with 0.2 N NaOH at 30 degrees C for 1 h, P(3HB) was recovered with purity of 98.5%. Using this simple recovery method, the effect of recovery method on the final production cost of P(3HB) was examined. Processes for the production of P(3HB) by recombinant E. coli from glucose with two different recovery methods, surfactant-hypochlorite digestion and simple digestion with NaOH, were designed and analyzed. By employing the fermentation process that resulted in P(3HB) concentration, P(3HB) content and P(3HB) productivity of 157 g/L, 77%, and 3.2 P(3HB) g/L-h, respectively, coupled with the recovery method of NaOH digestion, the production cost of P(3HB) was US$ 3.66/kg P(3HB), which was 25% less than that obtained by employing the surfactant-hypochlorite digestion method.     

In vivo and in vitro characterization of Ser477X mutations in polyhydroxyalkanoate (PHA) synthase 1 from Pseudomonas sp. 61-3: effects of beneficial mutations on enzymatic activity, substrate specificity, and molecular weight of PHA

Evolutionary engineered polyhydroxyalkanoate (PHA) synthases from Pseudomonas sp. 61-3 enhance PHA accumulation and enable the monomer composition of PHAs to be regulated. We characterized a newly screened Ser477Arg (S477R) mutant of PHA synthase by in vivo analyses of P(3-hydroxybutyrate) [P(3HB)] homopolymer and P(3HB-co-3-hydroxyalkanoate) [P(3HB-co-3HA)] copolymer productions in the recombinants of Escherichia coli. The results indicated that the S477R mutation contributed to a shift in substrate specificity to smaller monomers containing a 3HB unit rather than to an enhancement in catalytic activity. Multiple mutations of S477R with other beneficial mutations, for example, Ser325Cys, exhibited synergistic effects on both an increase in PHA production (from 9 wt % to 21 wt %) and an alteration of substrate specificity. Furthermore, the effects of complete amino acid substitutions at position 477 were characterized in terms of in vivo PHA production and in vitro enzymatic activity. The five mutations, S477Ala(A)/Phe(F)/His(H)/Arg(R)/Tyr(Y), resulted in a shift in substrate specificity to smaller monomer units. The S477Gly(G) mutant greatly enhanced activity toward all different sizes of substrates with carbon numbers ranging from 4 to 12. These results indicated that the residue 477 contributes to both the catalytic activity and substrate specificity of PHA synthase. In recombinant E. coli, the S477A/F/G/H/R/Y mutations consistently led to increases (up to 6 times that of wild-type enzyme) in weight average molecular weights of P(3HB) homopolymers. On the basis of our studies, we created a structural feasibility accounting for the mutational effects on enzymatic activity and substrate specificity of PHA synthase.     

In silico prediction and validation of the importance of the Entner-Doudoroff pathway in poly(3-hydroxybutyrate) production by metabolically engineered Escherichia coli

The metabolic network of Escherichia coli was constructed and was used to simulate the distribution of metabolic fluxes in wild-type E. coli and recombinant E. coli producing poly(3-hydroxybutyrate) [P(3HB)]. The flux of acetyl-CoA into the tricarboxylic acid (TCA) cycle, which competes with the P(3HB) biosynthesis pathway, decreased significantly during P(3HB) production. It was notable to find from in silico analysis that the Entner-Doudoroff (ED) pathway flux increased significantly under P(3HB)-accumulating conditions. To prove the role of ED pathway on P(3HB) production, a mutant E. coli strain, KEDA, which is defective in the activity of 2-keto-3-deoxy-6-phosphogluconate aldolase (Eda), was examined as a host strain for the production of P(3HB) by transforming it with pJC4, a plasmid containing the Alcaligenes latus P(3HB) biosynthesis operon. The P(3HB) content obtained with KEDA (pJC4) was lower than that obtained with its parent strain KS272 (pJC4). The reduced P(3HB) biosynthetic capacity of KEDA (pJC4) could be restored by the co-expression of the E. coli eda gene, which proves the important role of ED pathway on P(3HB) synthesis in recombinant E. coli as predicted by metabolic flux analysis.     

Biosynthesis and mobilization of poly(3-hydroxybutyrate) [P(3HB)] by Spirulina platensis

Three strains of Spirulina platensis isolated from different locations showed capability of synthesizing poly(3-hydroxybutyrate) [P(3HB)] under nitrogen-starved conditions with a maximum accumulation of up to 10 wt.% of the cell dry weight (CDW) under mixotrophic culture conditions. Intracellular degradation (mobilization) of P(3HB) granules by S. platensis was initiated by the restoration of nitrogen source. This mobilization process was affected by both illumination and culture pH. The mobilization of P(3HB) was better under illumination (80% degradation) than in dark conditions (40% degradation) over a period of 4 days. Alkaline conditions (pH 10-11) were optimal for both biosynthesis and mobilization of P(3HB) at which 90% of the accumulated P(3HB) was mobilized. Transmission electron microscopy (TEM) revealed that the mobilization of P(3HB) involved changes in granule quantity and morphology. The P(3HB) granules became irregular in shape and the boundary region was less defined. In contrast to bacteria, in S. platensis the intracellular mobilization of P(3HB) seems to be faster than the biosynthesis process. This is because in cyanobacteria chlorosis delays the P(3HB) accumulation process.     

Properties and biodegradability of ultra-high-molecular-weight poly[(R)-hydroxybutyrate] produced by a recombinant Escherichia coli.

Ultra-high-molecular-weight poly[(R)-3-hydroxybutyrate] (P(3HB)) (Mw = 3-11 x 10(6)) was produced from glucose by a recombinant Escherichia coli XL1-Blue (pSYL105) harboring Ralstonia eutropha H16 polyhydroxyalkanoate (PHA) biosynthesis genes. Morphology of ultra-high-molecular-weight P(3HB) granules in the recombinant cells was studied by transmission electron microscopy. The recombinant E. coli contained several P(3HB) granules within a cell. Freeze-fracture morphology of ultra-high-molecular-weight P(3HB) granules showed the needle-type as that of P(3HB) granules in R. eutropha. Both the P(3HB) granules in wet cells and wet native granules isolated from the recombinant cells proved to be amorphous on the X-ray diffraction patterns. Mechanical properties of ultra-high-molecular-weight P(3HB) films were markedly improved by stretching over 400%, resulting from high crystallinity and highly oriented crystal regions. Biodegradability of the films of ultra-high-molecular-weight P(3HB) was tested with an extracellular polyhydroxybutyrate depolymerase from Alcaligenes faecalis T1. The rate of enzymatic erosion of P(3HB) films was not dependent of the molecular weight but was dependent of the crystallinity. In addition, it is demonstrated that all ultra-high-molecular-weight P(3HB) films were completely degraded at 25 degrees C in a natural river freshwater within 3 weeks.     

Characterization of pGA1, a new plasmid from Corynebacterium glutamicum LP-6.

A new plasmid, pGA1, has been isolated from Corynebacterium glutamicum LP-6, and its detailed restriction map has been prepared. The 4.9-kb plasmid has a G + C content of 57%. It replicates in C. glutamicum ATCC13032 and is compatible with the three other plasmids, pCC1, pBL1 and pHM1519, commonly used for vector construction for amino acid-producing corynebacteria. Fusions of pGA1 with different Escherichia coli replicons (transferred from E. coli to Corynebacterium via transformation of spheroplasts or by filter mating experiments with intact cells) are shown to be suitable as shuttle plasmids; some of them are highly stable in C. glutamicum, even when propagated without any selection pressure.     

Microbial production of 4-hydroxybutyrate,poly-4-hydroxybutyrate,and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by recombinant microorganisms

4-Hydroxybutyrate (4HB) was produced by Aeromonas hydrophila 4AK4, Escherichia coli S17-1, or Pseudomonas putida KT2442 harboring 1,3-propanediol dehydrogenase gene dhaT and aldehyde dehydrogenase gene aldD from P. putida KT2442 which are capable of transforming 1,4-butanediol (1,4-BD) to 4HB. 4HB containing fermentation broth was used for production of homopolymer poly-4-hydroxybutyrate [P(4HB)] and copolymers poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-4HB)]. Recombinant A. hydrophila 4AK4 harboring plasmid pZL-dhaT-aldD containing dhaT and aldD was the most effective 4HB producer, achieving approximately 4 g/l 4HB from 10 g/l 1,4-BD after 48 h of incubation. The strain produced over 10 g/l 4HB from 20 g/l 1,4-BD after 52 h of cultivation in a 6-L fermenter. Recombinant E. coli S17-1 grown on 4HB containing fermentation broth was found to accumulate 83 wt.% of intracellular P(4HB) in shake flask study. Recombinant Ralstonia eutropha H16 grew to over 6 g/l cell dry weight containing 49 wt.% P(3HB-13%4HB) after 72 h.     

高产稳产聚羟基烷酸的重组大肠杆菌的构建

重组大肠杆菌Ｅｓｃｈｅｒｉｃｈｉａ ｃｏｌｉＨＭＳ１７４（ｐＴＺ１８ＵＰＨＢ） 含有携带聚羟基烷酸（ＰＨＡ） 合成基因（ ｐｈａＣＡＢ）＊＊ 的质粒ｐＴＺ１８ＵＰＨＢ,是很有潜力的ＰＨＡ 生产菌,但存在着质粒不稳定和不能合成３羟基丁酸（３ＨＢ） 与３羟基戊酸（３ＨＶ） 共聚物［Ｐ（３ＨＢｃｏ３ＨＶ）］ 的缺陷。将ＲＫ２ 质粒上的ｐａｒ ＤＥ 基因引入ｐＴＺ１８ＵＰＨＢ 构成质粒ｐＪＭＣ２ ,该质粒可以在宿主Ｅ．ＣｏｌｉＨＭＳ１７４ 中稳定遗传。将培养基中的磷酸盐浓度降至１８ ｍ ｍｏｌ／Ｌ,发现Ｅ．Ｃｏｌｉ ＨＭＳ１７４（ｐＪＭＣ２） 能够以丙酸为前体合成Ｐ（３ＨＢｃｏ３ＨＶ） ,其中３ＨＶ 在共聚物中的含量为５ ％ ～８ ％ 。在５Ｌ自动发酵罐中分批补料培养Ｅ．Ｃｏｌｉ ＨＭＳ１７４（ｐＪＭＣ２） ,培养基初始磷酸盐浓度为１５ ｍ ｍｏｌ／Ｌ,３０ ｈ 后每升培养液中干菌体可达４２－５ ｇ,Ｐ（３ＨＢｃｏ３ＨＶ） 占干重的７０ ％ ,其中３ＨＶ 在共聚物中的含量为４－９ ％ 。     

Rearrangement of gene order in the phaCAB operon leads to effective production of ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] in genetically engineered Escherichia coli

Ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] [UHMW-P(3HB)] synthesized by genetically engineered Escherichia coli is an environmentally friendly bioplastic material which can be processed into strong films or fibers. An operon of three genes (organized as phaCAB) encodes the essential proteins for the production of P(3HB) in the native producer, Ralstonia eutropha. The three genes of the phaCAB operon are phaC, which encodes the polyhydroxyalkanoate (PHA) synthase, phaA, which encodes a 3-ketothiolase, and phaB, which encodes an acetoacetyl coenzyme A (acetoacetyl-CoA) reductase. In this study, the effect of gene order of the phaCAB operon (phaABC, phaACB, phaBAC, phaBCA, phaCAB, and phaCBA) on an expression plasmid in genetically engineered E. coli was examined in order to determine the best organization to produce UHMW-P(3HB). The results showed that P(3HB) molecular weights and accumulation levels were both dependent on the order of the pha genes relative to the promoter. The most balanced production result was achieved in the strain harboring the phaBCA expression plasmid. In addition, analysis of expression levels and activity for P(3HB) biosynthesis enzymes and of P(3HB) molecular weight revealed that the concentration of active PHA synthase had a negative correlation with P(3HB) molecular weight and a positive correlation with cellular P(3HB) content. This result suggests that the level of P(3HB) synthase activity is a limiting factor for producing UHMW-P(3HB) and has a significant impact on P(3HB) production.     

Production of copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) through a one-step cultivation process

A one-step cultivation process for the production of biodegradable polymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] by Cupriavidus sp. USMAA2-4 was carried out using various carbon sources. It was found that Cupriavidus sp. USMAA2-4 could produce approximately 44 wt.% copolymer of P(3HB-co-4HB) with 27 mol% 4HB composition when the combination of oleic acid and 1,4-butanediol are used as carbon sources in 60 h cultivation. The manipulation of carbon-to-nitrogen ratio (C/N) resulted in the increase of dry cell weight, PHA content as well as 4HB composition. A new strategy of introducing oleic acid and 1,4-butanediol together and separately at different concentration demonstrated different yield in PHA content ranging from 47 to 58 wt.%. The molecular weight obtained was 234 kDa (by adding 1,4-butanediol and oleic acid together) and 212 kDa (by adding 1,4-butanediol separately). The copolymer of P(3HB-co-4HB) produced by Cupriavidus sp. USMAA2-4 was detected statistically as a random copolymer when analysed by nuclear magnetic resonance (NMR) spectroscopy.     

Fabrication and characterization of biodegradable poly(3-hydroxybutyrate) composite containing bioglass

Bacterially derived poly(3-hydroxybutyrate) (P(3HB)) has been used to produce composite films by incorporating Bioglass particles (<5 microm) in 5 and 20 wt % concentrations. P(3HB) was produced using a large scale fermentation technique. The polymer was extracted using the Soxhlet technique and was found to have similar thermal and structural properties to the commercially available P(3HB). The effects of adding Bioglass on the microstructure surface and thermal and mechanical properties were examined using differential scanning calorimetry, dynamic mechanical analysis (DMA), X-ray diffraction, surface interferometry, electron microscopy, and nanoindentation. The addition of increasing concentrations of Bioglass in the polymer matrix reduced the degree of crystallinity of the polymer as well as caused an increase in the glass transition temperature as determined by DMA. The presence of Bioglass particulates reduced the Young's modulus of the composite. The storage modulus and the loss modulus, however, increased with the addition of 20 wt % Bioglass. A short period (28 days) in vitro bioactivity study in simulated body fluid confirmed the bioactivity of the composites, demonstrated by the formation of hydroxyapatite crystals on the composites' surface.     

利用重组大肠杆菌产聚-4-羟基丁酸的研究

重组大肠杆菌 E.coli XL-1 Blue（pKSSE5.3）携带Ralstonia　eutropha　H16的 PHA聚合酶基因（phaC）和Clostridium kluyveri的4-羟基丁酸:CoA转移酶基因（orfZ）,可以利用葡萄糖和4-羟基丁酸为碳源合成均聚的聚-4-羟基丁酸[P（4HB）]。优化培养基和培养条件后,进行了补料分批培养。结果表明,经68h左右培养,E.coli XL-1 Blue（pKSSE5.3）的发酵液中菌体干重达13g/L,P（4HB）的密度达5g/L,P（4HB）百分含量为36％。从收获的冻干细胞中提纯得到40g均聚的P（4HB）,为进一步分析检测P（4HB）生物、理化、加工特性及其应用价值成为可能。     

A novel genetically engineered pathway for synthesis of poly(hydroxyalkanoic acids) in Escherichia coli

A new pathway to synthesize poly(hydroxyalkanoic acids) (PHA) was constructed by simultaneously expressing butyrate kinase (Buk) and phosphotransbutyrylase (Ptb) genes of Clostridium acetobutylicum and the two PHA synthase genes (phaE and phaC) of Thiocapsa pfennigii in Escherichia coli. The four genes were cloned into the BamHI and EcoRI sites of pBR322, and the resulting hybrid plasmid, pBPP1, conferred activities of all three enzymes to E. coli JM109. Cells of this recombinant strain accumulated PHAs when hydroxyfatty acids were provided as carbon sources. Homopolyesters of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), or 4-hydroxyvalerate (4HV) were obtained from each of the corresponding hydroxyfatty acids. Various copolyesters of those hydroxyfatty acids were also obtained when two of these hydroxyfatty acids were fed at equal amounts: cells fed with 3HB and 4HB accumulated a copolyester consisting of 88 mol% 3HB and 12 mol% 4HB and contributing to 68.7% of the cell dry weight. Cells fed with 3HB and 4HV accumulated a copolyester consisting of 94 mol% 3HB and 6 mol% 4HV and contributing to 64.0% of the cell dry weight. Cells fed with 3HB, 4HB, and 4HV accumulated a terpolyester consisting of 85 mol% 3HB, 13 mol% 4HB, and 2 mol% 4HV and contributing to 68.4% of the cell dry weight.     

Improved production of poly(3-hydroxybutyrate-co-4-hydroxbutyrate) copolymer using a combination of 1,4-butanediol and γ-butyrolactone

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was able to synthesize poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] when fed with the precursor carbon 1,4-butanediol using a two-stage cultivation process. When 1% (w/v) of 1,4-butanediol was used, 31 wt.% of P(3HB-co-4HB) copolymer with 41 mol.% of 4HB molar fraction was produced. Both the PHA content and 4HB composition of the copolymer increased as the concentration of 1,4-butanediol increased but the cell biomass did not show any significant changes. However, the 4HB fraction could be further increased using a combination of γ-butyrolactone and 1,4-butanediol. As high as 84 mol.% of 4HB composition was achieved with a combination of 0.35% (w/v) 1,4-butanediol and 1.4% (w/v) γ-butyrolactone. Nevertheless, it was found that Cupriavidus sp. USMAA2-4 cells were inhibited by high concentration of γ-butyrolactone. P(3HB-co-4HB) copolymer was also successfully synthesized using a simplified aerated tank.     

类产碱假单胞菌耐热碱性脂肪酶基因的克隆

将类产碱假单胞菌(Pseudomonas pseudoalcaligene)总DNA经Sau3AI部分酶解后的35～50kbDNA片段与经BamHI线性化及CIAP处理过的粘粒pIJ285连接,以大肠杆菌LE392为受体,构建类产碱假单胞菌的基因文库。通过三丁酸甘油酯平板和橄榄油平板法检测克隆子,获得一株具有耐热碱性脂肪酶活性的菌株LE392(pHZ1401)。随后将pHZ1401上的外源DNA片段进行亚克隆,从而获得了具有脂肪酶活性的菌株HB101(pHZ1402)和HB101(pHZ1403),它们分别携带有2.9kb和3.0kb的外源片段。两外源片段约有2kb的重叠区。HB101(pHZ1403)所分泌的脂肪酶活性比HB101(pHZ1402)高4倍,是出发菌的5倍。     

利用两种工程菌共培养生产聚羟基烷酸的研究

方法:主要是将携带生产P(3HB)基因的工程菌E.coliXL1-Blue(pKSABC)和携带4-羟基丁酸辅酶A转移酶和PHA合成酶基因的工程菌E.coliXL1-Blue(pKSSE5.3)共培养,以葡萄糖为唯一碳源来生产含有3HB和4HB的聚合物的研究。结果:培养48h后,结果表明,两种工程菌共培养能够获得韧性更强和强度更大的PHA,PHA的积累量占总生物量的44.4%。