Novel DNA structures resulting from dTam3 excision in tobacco

A Tam3 two-element system has been designed by combining an immobilized Tam3 element with a non-autonomous dTam3 element inserted into the HPT gene. The phenotypic assay employed, restored hygromycin resistance, indicated thattrans-activation of the non-autonomous dTam3 element occurred. Molecular analyses of the excision sites revealed that the ends of the dTam3 element remain in the empty donor sites. The predominant consequence of this type of excision appears to be that excised fragments fail to re-integrate into the tobacco genome. Only one case of dTam3 re-integration could be detected. The ends of this element had been degraded upon integration into the tobacco genome. Either the altered structure of the Tam3 derivatives or tobacco host factors are influencing thetrans-activation of a dTam3 element, resulting in aberrant excision.     

Immobilized copies with a nearly intact structure of the transposon Tam3 in Antirrhinum majus: implications for the cis-element related to the transposition

 In this study we have focused on two copies of the transposon Tam3 isolated from an Antirrhinum majus plant which has flower variegation due to the excision of Tam3 from the nivea locus. These two copies possess a high homology, over 95%, to an active Tam3 element found in the nivea ^{recurrence:Tam3} allele. Although somatic excision of the Tam3 copy from the nivea locus can be detected at 15°C by Southern blotting, neither of the two copies showed any sign of the excision. Both of the immobilized copies were also found in five varieties from different A. majus sources, all of which contain common fragments. The results suggest that the two copies have been fixed in the genomes of many A. majus varieties. Structural differences between these immobilized copies and the known active copy were mainly observed in the subterminal regions, including the terminal inverted repeats. The immobility of the two Tam3 copies might be due to mutations within the end regions of essential cis-elements in Tam3 transposition, as reported for Ac and En/Spm. Received: 30 June 1997 / Accepted: 5 August 1997     

Phenotypic effects of short-range and aberrant transposition in Antirrhinum majus

We describe two novel ways in which changes in gene expression in Antirrhinum majus may arise as a consequence of the Tam3 transposition mechanism. One involves excision of Tam3 from the nivea gene promoter and insertion of two new Tam3 copies 3.4 kb and 2.1 kb away, on either side of the excision site. One of the new insertions is in the nivea coding region and completely blocks production of an active gene product. This allele probably arose by a symmetrical double transposition, following chromosome replication. The second case involves a small deletion at one end of Tam3 in the pallida gene, flanked by a sequence typical of a Tam3 excision footprint. This suggests that the end of Tam3 was cleaved at an early step in an attempted transposition and re-ligated back to its original flanking sequence. The alteration restores some expression to the pallida gene, suggesting that the ends of the intact Tam3 element contain components which can actively inhibit gene expression. The implications of these findings for the mechanism of Tam3 transposition and for the effects of Tam3 on host gene expression are discussed.     

Comparison of genetic behaviour of the transposable element Tam3 at two unlinked pigment loci in Antirrhinum majus

Summary In Antirrhinum majus the transposable element Tam3 has been described at two unlinked loci pallida and nivea, both of which are required for the production of anthocyanin pigment in flowers. In each case the element is inserted in the promoter region and gives a variegated phenotype. We show that the rate of Tam3 excision at both loci is greatly affected by temperature, being approximately 1000-fold higher at 15°C compared with 25°C. Tam3 is also controlled by an unlinked gene Stabiliser, which considerably reduces excision rate. We show that the high degree of sensitivity to temperature and Stabiliser is an intrinsic property of Tam3 which is not shared by an unrelated element, Tam1. The Tam3 insertion at nivea gives rise to a series of alleles which confer reduced pigmentation, novel spatial patterns and changed instability. These are probably a result of imprecise excision and rearrangements of the Tam3 element.     

A comparative study of Tam3 and Ac transposition in transgenic tobacco and petunia plants

Transposition of the Anthirrinum majus Tam3 element and the Zea mays Ac element has been monitored in petunia and tobacco plants. Plant vectors were constructed with the transposable elements cloned into the leader sequence of a marker gene. Agrobacterium tumefaciens-mediated leaf disc transformation was used to introduce the transposable element constructs into plant cells. In transgenic plants, excision of the transposable element restores gene expression and results in a clearly distinguishable phenotype. Based on restored expression of the hygromycin phosphotransferase II (HPTII) gene, we established that Tam3 excises in 30% of the transformed petunia plants and in 60% of the transformed tobacco plants. Ac excises from the HPTII gene with comparable frequencies (30%) in both plant species. When the -glucuronidase (GUS) gene was used to detect transposition of Tam3, a significantly lower excision frequency (13%) was found in both plant species. It could be shown that deletion of parts of the transposable elements Tam3 and Ac, removing either one of the terminal inverted repeats (TIR) or part of the presumptive transposase coding region, abolished the excision from the marker genes. This demonstrates that excision of the transposable element Tam3 in heterologous plant species, as documented for the autonomous element Ac, also depends on both properties. Southern blot hybridization shows the expected excision pattern and the reintegration of Tam3 and Ac elements into the genome of tobacco plants.     

Interaction between the Tam1 and Tam2 transposable elements of Antirrhinum majus

Summary Two stable derivatives of the highly unstable niv-53::Tam1 allele of Antirrhinum majus were analysed. In both derivatives the Tam1 element is integrated at the same site and in the same orientation as in the parental niv-53::Tam1 allele. In both cases the Tam1 element was found to carry a 5 bp deletion (CACTA) in one of its termini. This explains the excision deficiency of these two alleles of Tam1, niv-53::Tam1-46 and niv-53::Tam1-49. Niv-44::Tam2, another stable nivea mutation, carries the 5 kb element Tam2, which is not a derivative of Tam1 but possesses identical terminal inverted repeats. When the stable lines 46 and 49 were corssed with line 44, suprisingly, a high number of the flowers in the F₁ displayed a variegated phenotype. Sequence analysis of two germinal revertants isolated from the heterozygote niv-53::Tam1-46/niv-44::Tam2 shows excision of the Tam2 element. This indicates that Tam2 is a defective element, which can be complemented by an active Tam1 element. However, the variegated F₁ phenotype observed is not inherited monofactorially. Variegation is seen only at particular times of development of the F₁ plants. These phenomena seem to involve both the Tam1 and Tam2 transposable elements.     

Evidence forTAM3 activity in transgenicArabidopsis thaliana

Summary TheAntirrhinum majus Tam3 element was introduced intoArabidopsis thaliana protoplasts and plants in order to assess the influence of anin vitro culture phase such as protoplasts and callus culture on the mobility of this transposable element in this plant species. The constructs used contained theTam3 element inserted in between the CaMV 35S promoter and thegus- orhpt-coding region, allowing a direct selection of excision candidates. From the different approaches used, only a long-term callus culture allowed us to detectTam3 activity. NoTam3 activity could be detected in protoplasts or protoplast-derived microcolonies. Our data are compared with those previously reported forTam3 in tobacco and petunia.     

The transposable element Tam3 of Antirrhinum majus generates a novel type of sequence alterations upon excision

Summary The 3.5 kb transposable element, Tam3, has been shown to cause somatic and germinal instability at the nivea locus, which encodes chalcone synthase, of Antirrhinum majus. Molecular cloning and sequence analysis of the niv-98::Tam3 allele revealed that the termini of Tam3 consist of 12 bp perfect inverted repeats. Tam3 is integrated in the promoter region of the chalcone synthase gene and generates an 8 bp duplication of target sequences upon integration. DNA sequencing of a niv ⁺x revertant, niv-164, revealed a new type of sequence alteration upon excision: the duplications are displaced by ten nucleotides generated from adjacent sequences. Structural similarities of Tam3 and the maize elements Ac/Ds suggest that these elements belong to a common family.Dedicated to Professor Georg Melchers to celebrate his 50-year association with the journal     

De novo activation of the transposable element Tam2 of Antirrhinum majus

Summary The nivea locus of Antirrhinum majus encodes the enzyme chalcone synthase required for the synthesis of red anthocyanin pigment. The stable allele niv-44 contains an insertion in the nivea gene (Tam2) which has all the structural features of a transposable element. We have shown that this insertion can excise from the nivea locus when niv-44 is combined with another allele (niv-99) in a heterozygote. Activation of Tam2 excision is caused by a factor tightly linked to the niv-99 allele and may be due to complementation between Tam2 and a related element, Tam1. Factors which repress the excision of Tam2 and Tam1 are also described. Repression is not inherited in a simple mendelian way. Many stable mutations may be due to the insertion of transposable elements. Our data suggest that their stability may be due to the absence in the genome of activating factors and to the presence of repressors.     

Position effect of the excision frequency of the Antirrhinum transposon Tam3: implications for the degree of position-dependent methylation in the ends of the element

We identified eight independent Tam3 copies residing in the same Antirrhinum majus genome. All the copies showed excision at 15 °C, but not at 25 °C. Under conditions promoting excision, each copy appeared to transpose in the leaves and flower lobes with a nearly constant frequency, whereas individual transposition abilities varied widely: the most active copy had an excision frequency more than 100-fold greater than that of the least active one. Despite the different transposition abilities, the structures of the eight Tam3 copies were almost identical. These results made it clear that the transpositional ability of Tam3 is regulated by chromosomal position, but they do not imply position-dependent transposase activity. The position effect of the Tam3 transposition was found to be correlated to the methylation state of the copy's end regions: DNA methylation in the Tam3 end regions tended to suppress the excision activity, and the degree of methylation was dependent on the chromosomal position. Our results also provide evidence of de novo methylation provoked by transposition of the endogenous element. We propose a mechanism of transpositional regulation of plant transposons that responds to the degree of methylation as determined by chromosomal position.     

The transposable element Tam1 of Antirrhinum majus is 17 kb long

Summary The nivea locus of Antirrhinum majus encodes chalcone synthase, a key enzyme in anthocyanin biosynthesis. Genetic instability is known to occur at this locus. In vitro cloning and characterization of genomic DNA fragments from the unstable nivea-recurrens allele T53 revealed that the instability of nivea-recurrens is due to the presence of a 17 kb DNA insert in the nivea locus. Somatic instability leading to the variegated phenotype, i.e. highly spotted flowers, is due to frequent excision of the 17 kb Tam1 element (Transposon antirrhinum majus) during development of the plant. Excision of Tam1 is not tissue specific, but occurs with similar frequencies in leaves and blossoms.     

Tam3 in Antirrhinum majus is exceptional transposon in resistant to alteration by abortive gap repair: identification of nested transposons

Most transposon families consist of heterogeneous copies with varying sizes. In contrast, the Tam3 copies in Antirrhinum majus are known to have exceptionally conserved structures of uniform size. Gap repair has been reported to be involved in the structural alteration of copies from several transposon families. In this study, we have asked whether or not gap repair has affected Tam3 copies. Five Tam3 copies carrying aberrant sequences were selected from 40 independent Tam3 clones and their sequences were analyzed. Two of the five copies contain insertions in the Tam3 sequence. These two insertions, designated Tam356 and Tam661, are typical transposon-like sequences, which have terminal inverted repeats and cause target site duplication. These nested transposons were obviously associated with transpositional events, and did not originate from the gap-repair process. The remaining three copies had lost large parts of the Tam3 sequence. We could not find any relationship between the deletions of Tam3 sequence in the three copies and gap repair. PCR analysis of a Tam3 excision site in the nivea ^{recurrence:Tam3} mutant also showed that most of the repair events after the Tam3 excision involved end-joining. In addition to the results obtained here, among the other clones isolated, we could not find any of the internally deleted copies that comprise a major part of other transposon families. All of these data suggest that some feature of the Tam3 structure suppresses the structural alterations that are otherwise generated during the gap repair process. Received: 22 April 1998 / Accepted: 15 June 1998     

Tam3 in Antirrhinum majus is exceptional transposon in resistant to alteration by abortive gap repair: identification of nested transposons

Most transposon families consist of heterogeneous copies with varying sizes. In contrast, the Tam3 copies in Antirrhinum majus are known to have exceptionally conserved structures of uniform size. Gap repair has been reported to be involved in the structural alteration of copies from several transposon families. In this study, we have asked whether or not gap repair has affected Tam3 copies. Five Tam3 copies carrying aberrant sequences were selected from 40 independent Tam3 clones and their sequences were analyzed. Two of the five copies contain insertions in the Tam3 sequence. These two insertions, designated Tam356 and Tam661, are typical transposon-like sequences, which have terminal inverted repeats and cause target site duplication. These nested transposons were obviously associated with transpositional events, and did not originate from the gap-repair process. The remaining three copies had lost large parts of the Tam3 sequence. We could not find any relationship between the deletions of Tam3 sequence in the three copies and gap repair. PCR analysis of a Tam3 excision site in the nivea ^{recurrence:Tam3} mutant also showed that most of the repair events after the Tam3 excision involved end-joining. In addition to the results obtained here, among the other clones isolated, we could not find any of the internally deleted copies that comprise a major part of other transposon families. All of these data suggest that some feature of the Tam3 structure suppresses the structural alterations that are otherwise generated during the gap repair process.     

The paramutagenic line niv-44 has a 5 kb insert, Tam 2, in the chalcone synthase gene of Antirrhinum majus

Summary Several alleles of the nivea locus of Antirrhinum majus, both stable and unstable, have been characterised genetically (Harrison and Carpenter 1973 a, b). In this work the niv-44 allele is characterised at the molecular level. It contains a 5kb insertion element, Tam 2, which has 14 base pair inverted repeats. There is a three base pair duplication at the target site, which is at the first intron-exon boundary of the chalcone synthase gene. Tam 2 homologous sequences are present in multiple copies in several A. majus lines, including niv-53, and most have at least a 2.9 kb sequence in common with the copy at the chalcone synthase gene. Possible reasons for the apparent stability of the niv-44 allele and molecular explanations for the role of this allele in paramutation in A. majus are discussed.Dedicated to Professor Georg Melchers to celebrate his 50-year association with the journal     

The 17-kb Tam1 element of Antirrhinum majus induces a 3-bp duplication upon integration into the chalcone synthase gene

The DNA sequence of the termini and the flanking regions of the 17-kb transposable element Tam1 was determined. Tam1 is integrated in the chalcone synthase gene of the niv-53 mutant of Antirrhinum majus. The element has a 13-bp perfect inverted repeat at its termini and appears to induce a 3-bp duplication of the target site upon integration. The DNA sequence of a niv⁺ revertant was analyzed and found to differ from the wild-type sequence by an additional 2 bp that seem to derive from the target site duplication. Stretches of homologous sequences have been found between the ends of Tam1, within each terminus of the element, and between the termini and target site sequences. Structural similarities between the ends of Tam1 and the Spm-18 element of Zea mays reflect a possible horizontal spread of a common progenitor.     

Molecular Analysis of a Transposon-Induced Deletion of the Nivea Locus in Antirrhinum Majus

The transposable element Tam3 of Antirrhinum majus is capable of causing large-scale chromosomal restructuring. It induced a large deletion at the nivea locus, to produce the allele niv-:529. The deletion removed the entire nivea coding region while the element remains intact with the potential to induce further rearrangements. Genetic experiments showed that the endpoint of the deletion (called x) is closely linked to nivea. The DNA sequences of niv-:529, a genomic excision of Tam3 from niv-:529, and the original genomic position of x have been determined. These data suggest that the deletion could have resulted from an abortive transposition or through breakage and religation.     

Large-scale chromosomal restructuring is induced by the transposable element tam3 at the nivea locus of antirrhinum majus

The transposable element, Tam3, gives rise to large-scale (greater than 1 kb) chromosomal rearrangements at a low frequency, when it is inserted at the nivea locus of Antirrhinum majus. Although some deletions may result from imprecise excision of Tam3, rearrangements involving deletion, dispersion and inverted duplication of flanking sequences, where Tam3 remains in situ, have also been identified. These rearrangements have been mapped at the molecular level, and the behavior of Tam3 following rearrangement has been observed. It is clear that Tam3 has enormous potential to restructure chromosomes through successive rounds of large-scale rearrangements. The mechanisms by which such rearrangements might arise are discussed.     

Activity of the transposon Tam3 in Antirrhinum and tobacco: possible role of DNA methylation.

The transposon Tam3 from Antirrhinum majus can transpose in a heterologous host (Nicotiana tabacum); thus the element is autonomous, probably encoding the specific information required for its own transposition. In transgenic tobacco Tam3 rapidly becomes methylated at its ends whilst adjacent flanking sequences remain hypomethylated. This methylation may account for our failure to detect Tam3 transposition in the progeny of transgenic tobacco. Treatment with the inhibitor of cytosine methylation, 5 aza-cytosine appeared to induce transposon related activity at a low level. In Antirrhinum methylation also appears to be associated with inactivation of Tam3 copies.     

Molecular analysis of paramutant plants of Antirrhinum majus and the involvement of transposable elements

Paramutation is observed when the Antirrhinum majus lines 44 and 53 are crossed. These two lines both have insertions at the nivea locus, which encodes chalcone synthase (chs). The allele niv-53 carries the transposable element Tam1 in the promoter region of the chs gene; niv-44 carries the element Tam2 within the gene. The Tam1 element has previously been extensively characterised. Here the Tam2 element is further characterised, and the arrangement of the nivea locus in paramutant plants is analysed. The complete sequence of Tam2, and that of a partial cDNA complementary to it, have been determined. The cDNA is probably transcribed from a different copy of Tam2 from that present at the nivea locus, and does not encode a functional protein. Genomic Southerns of F1 plants from the 53/44 cross show that no major rearrangements are consistently associated with paramutation at the nivea locus of A. majus. The isolation from a paramutant plant arising from a 53/44 cross of an allele (niv-4432) resulting from the excision of Tam2 is reported. The excision of Tam2 resulted in a 32 bp deletion of chs gene sequences. Plants homozygous for the new niv-4432 allele have white flowers and are still paramutagenic, demonstrating that Tam2 need not be present at the nivea locus for paramutation to occur. Different interactions between Tam1 and Tam2 are discussed, and a possible model for paramutation is presented.     

The Spm (En) transposable element controls the excision of a 2-kb DNA insert at the wx allele of Zea mays

The waxy (Wx) locus of Zea mays was cloned from strains carrying the wild-type and wx^m-8 mutant alleles. The receptor component of the Suppressor-Mutator (Spm) controlling element system in the wx^m-8 allele was shown to be a 2 kb long insertion within the transcribed region of the Wx gene. The insertion, termed Spm-I8, is excised during somatic reversion events induced by the autonomous controlling element Enhancer (En), which is an equivalent to Spm. Integration of Spm-I8 into the Wx gene generates a 3-bp target site duplication. Spm-I8 has a 13 bp long inverted repeat at its termini. The ends of the element can be further folded to build a large double-stranded structure consisting of five perfectly matching double-stranded regions of 9–13 bp in length, interrupted by single-stranded loops. A comparison of the wild-type and wx^m-8 alleles revealed two additional insertions 6 (insert-1) and 0.25 (insert-2) kb in length. No En-induced excision of insert-1 and insert-2 could be detected so far. There is remarkable structure and sequence homology between Spm-I8 and the transposable elements Tam1 and Tam2 of Antirrhinum majus at their termini, reflecting a possible evolutionary and/or functional relationship between transposons in different plant species.