Characterization and construction of molecular cloning vehicles within Staphylococcus aureus.

Four chloramphenicol resistance (Cm) and four tetracycline resistance (Tc) plasmids from Staphylococcus aureus were characterized by restriction endonuclease mapping. All four Tc plasmids had molecular masses of 2.9 megadaltons (Mdaltons) and indistinguishable responses to seven different restriction endonucleases. The four Cm plasmids (pCW6, pCW7, pCW8, and pC221) had molecular masses of 2.6, 2.8, 1.9, and 2.9 Mdaltons, respectively. The four Cm plasmids also differed both in the level of resistance to Cm and in susceptibility to retriction endonucleases. Single restriction endonuclease sites contained within each plasmid included the following: in pCW6 for HindIII, XbaI, HpaII, and BstEII; in pCW7 for HindIII, BstEII, BglII, HaeIII, and HpaII; in pCW8 for HindIII, HaeIII, and HpaII; in pC221 for HindIII, BstEII, and EcoRI. The molecular cloning capabilities of pCW8 and pC221 were determined. Cm and erythromycin resistance (Em) recombinant plasmids pCW12, PCW13, and pCW14 were constructed and used to transform S. aureus 8325-4. A 2.8-Mdalton HindIII fragment from plasmid pI258 was found to encode Em resistance and contain single sites for the retriction endonucleases BglII, PstI, HaeIII, and HpaII. The largest EcoRI fragment (8 Mdaltons) from pI258 contained the HindIII fragment encoding Em resistance intact. Cloning of DNA into the BglII site of pCW14 did not alter Em resistance. Cloning of DNA into the HindIII site of pCW8 and the HindIII and EcoRI sites of pC221 did not disrupt either plasmid replication of Cm resistance.     

Cloning of bacteriophage T5 DNA fragments in the plasmid pBR322. Analysis of recombinant plasmids by the method of bonding with RNA-polymerase from Escherichia coli on nitrocellulose filters

DNA of bacteriophage T5 was hydrolyzed with restriction endonucleases HindIII and BamHI, and subjected to the combined hydrolysis with BamHI+EcoRI and BamHI+ +HindIII. Fragments obtained were cloned in the plasmid pBR322. About 17% of T5 genome were recovered in recombinant plasmids. Cloned fragments were localized on the physical map of the phage by restriction analysis and Southern hybridization. With the aim of direct cloning of T5 promoters, PstI/HindIII fragments were inserted into pBR322 followed by selection of recombinants on ApsTCr phenotype. Binding of BsuRI and AluI fragments of hybrid plasmids with E. coli RNA polymerase was studied by nitrocellulose filter assay. The fragments, which were capable to form heparin resistant complexes were identified.     

Restriction endonuclease mapping and mutagenesis of the F sex factor replication region.

The plasmids pSC138 and pML31 each contain the EcoRI-generated f5 replicator fragment of the conjugative plasmid F in addition to an EcoRI fragment encoding antibiotic resistance: ampicillin resistance derived from Staphylococcus aureus in pSC138 and kanamycin resistance from Escherichia coli in pML31. We have mapped one HindIII and two BamHI restriction sites in the f5 region of these plasmids and one HindIII site in the antibiotic resistance region of each plasmid. The HindIII site in the Km region of pML31 occurs in the kan gene whereas the HindIII site in the Ap region of pSC138 appears to occur in an area important for the regulation of beta-lactamase production. By means of in vitro recombinant DNA manipulation of plasmids pML31 and pSC138, we have shown that approximately 1.9 X 10(6) daltons of the 6.0 X 10(6) dalton f5 fragment can be deleted without disrupting plasmid stability. In addition, we have used these same techniques to isolate a novel F-controlled Ap plasmid cloning vehicle which contains a single restriction site for each of the enzymes EcoRI, HindIII, and BamHI. This cloning vehicle has been linked via either its EcoRI or HindIII site to a ColE1 plasmid replicon to yield stable recombinants.     

Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

Recovery of activity of the gene coding for tetracycline resistance in the plasmin pBRS188

The spontaneous recovery of activity of tet gene deleted of the promoter region was studied. Plasmid pBRS188 was used as a model for studying this problem. The plasmid has the fragment of tet gene of pBR322, from which it originates, between the sites of restriction endonucleases EcoRI and HindIII cleavage resulting in inactivation of tet promoter. E. coli cells harbouring the plasmid were shown to revert the TcR phenotype with the frequency 10(-9). The gene activation coincided with intraplasmid recombination revealed by restriction analysis. In some cases the recovery of tet gene activity coincided with the formation of multimeric plasmids.     

Isolation and characterization of a gene coding for glyceraldehyde-3-phosphate dehydrogenase from Saccharomyces cerevisiae.

A yeast glyceraldehyde-3-phosphate dehydrogenase gene has been isolated from a collection of Escherichia coli transformants containing randomly sheared segments of yeast genomic DNA. Complementary DNA, synthesized from partially purified glyceraldehyde-3-phosphate dehydrogenase messenger RNA, was used as a hybridization probe for cloning this gene. The isolated hybrid plasmid DNA has been mapped with restriction endonucleases and the location of the glyceraldehyde-3-phosphate dehydrogenase gene within the cloned segment of yeast DNA has been established. There are approximately 4.5 kilobase pairs of DNA sequence flanking either side of the glyceraldehyde-3-phosphate dehydrogenase gene in the cloned segment of yeast DNA. The isolated hybrid plasmid DNA has been used to selectively hybridize glyceraldehyde-3-phosphate dehydrogenase messenger RNA from unfractionated yeast poly(adenylic acid)-containing messenger RNA. The nucleotide sequence of a portion of the isolated hybrid plasmid DNA has been determined. This nucleotide sequence encodes 29 amino acids which are at the COOH terminus of the known amino acid sequence of yeast glyceraldehyde-3-phosphate dehydrogenase.     

Molecular cloning and physical mapping of murine cytomegalovirus DNA.

Murine cytomegalovirus (MCMV) Smith strain DNA is cleaved by restriction endonuclease HindIII into 16 fragments, ranging in size from 0.64 to 22.25 megadaltons. Of the 16 HindIII fragments, 15 were cloned in plasmid pACYC177 in Escherichia coli HB101 (recA). The recombinant plasmid clones were characterized by cleavage with the enzymes XbaI and EcoRI. In addition, fragments generated by double digestion of cloned fragments with HindIII and XbaI were inserted into the plasmid vector pACYC184. The results obtained after hybridization of 32P-labeled cloned fragments to Southern blots of MCMV DNA cleaved with HindIII, XbaI, EcoRI, BamHI, ApaI, ClaI, EcoRV, or KpnI allowed us to construct complete physical maps of the viral DNA for the restriction endonucleases HindIII, XbaI, and EcoRI. On the basis of the cloning and mapping experiments, it was calculated that the MCMV genome spans about 235 kilobase pairs, corresponding to a molecular weight of 155,000,000. All fragments were found to be present in equimolar concentrations, and no cross-hybridization between any of the fragments was seen. We conclude that the MCMV DNA molecule consists of a long unique sequence without large terminal or internal repeat regions. Thus, the structural organization of the MCMV genome is fundamentally different from that of the human cytomegalovirus or herpes simplex virus genome.     

Specific-purpose plasmid cloning vectors. II. Broad host range, high copy number, RSF1010-derived vectors, and a host-vector system for gene cloning in Pseudomonas

Host-vector systems have been developed for gene cloning in the metabolically versatile bacterial genus Pseudomonas. They comprise restriction-negative host strains of Pseudomonas aeruginosa and P. putida and new cloning vectors derived from the high-copy-number, broad-host-range plasmid RSF1010, which are stably maintained in a wide range of Gram-negative bacteria. These plasmids contain EcoRI, SstI, HindIII, XmaI, XhoI, SalI, BamHI, and ClaI insertion sites. All cloning sites, except for BamHI and ClaI, are located within antibiotic-resistance genes' insertional inactivation of these genes during hybrid plasmid formation provides a readily scored phenotypic change for the rapid identification of bacterial clones carrying such hybrids. One of the new vector plasmids is a cosmid that may be used for the selective cloning of large DNA fragments by in vitro lambda packaging. An analogous series of vectors that are defective in their plasmid-mobilization function, and that exhibit a degree of biological containment comparable to that of current Escherichia coli vector plasmids, are also described.     

Cloning chloroplast DNA in escherichia coli. I. Construction and selection of recombinant plasmids containing fragments of pea chloroplast DNA]

Fragments produced by digestion of Pisum sativum chloroplast DNA with EcoRI were examined by agarose gel electrophoresis. These EcoRI-fragments were joined in vitro to Apr-ColE1 RSF2124 plasmid and cloned in Escherichia coli. Methods of molecular cloning of plasmid chimeras by success gradient centrifugation and repeated transformation and selection of recombinant plasmids using mytomicin C were used for cloning hybrid plasmids with various EcoRI fragments of pea chloroplast DNA has been obtained.     

Construction and restriction endonuclease mapping of hybrid plasmids containing Saccharomyces cerevisiae ribosomal DNA.

Summary Fragments produced by partial digestion of Saccharomyces cerevisiae ribosomal DNA (rDNA) with the restriction endonuclease EcoRI were ligated in vitro to the bacterial plasmid RSF2124. The resulting hybrid plasmids were cloned in Escherichia coli. Three hybrid plasmids which contain at least one intact repetitive unit of the multiple, tandem sequences of the yeast rDNA genes have been further characterized. These plasmids have been used to construct a map of the EcoRI, SmaI, HindII and HindIII restriction sites in the individual repetitive units of yeast rDNA.     

Characterization of a cryptic plasmid (p0M1) inButyrivibrio fibrisolvens by restriction endonuclease analysis and its cloning inEscherichia coli

A small cryptic plasmid has been identified in a strain of the ruminal bacteriumButyrivibrio fibrisolvens. This plasmid has been isolated and purified. It is approximately 2.8 kbp in length and contains restriction sites for a number of common endonucleases including single sites for EcoRI, PvuII, and PstI. A map of the plasmid restriction sites has been constructed. This plasmid, designated p0M1, has been ligated to pBR325, pAT153, and pHV33 and transformed intoEscherichia coli, and the resulting hybrid plasmids have been mapped. The possible uses of such hybrid plasmids for gene cloning inB. fibrisolvens are discussed.     

Construction of plasmid vectors for gene cloning in Escherichia coli and Bacillus subtilis

The construction and some properties of new hybrid plasmids which are able to replicate in both Escherichia coli and Bacillus subtilis are presented. A 5.5 Md hybrid plasmid pJP9 was constructed from pBR322 (Tc, Ap) and pUB110 (Nm) plasmids. pIM1 (7.0 Md) and pIM3 (7.7 Md) plasmids are its different erythromycin resistant derivatives. Tetracycline, ampicillin, neomycin and possibly erythromycin resistance genes are expressed in E. coli while neomycin and erythromycin resistance genes are expressed in B. subtilis. Insertional inactivation of only one gene is possible using the pJP9 plasmid as a vector in B. subtilis. However, insertional inactivation of at least two different genes can be achieved and monitored in E. coli and B. subtilis transformants in cloning experiments with PIM1 and pIM3 plasmids. Insertional inactivation of antibiotic resistance genes present in pJP9 plasmid was achieved by cloning of Streptococcus sanguis DNA fragments generated by appropriate restriction endonucleases. The pJP9 plasmid and its derivatives were found to be stable in both hosts cells.     

Localization of the DNA segment coding for the synthesis of fraction I on the pYT plague pathogen plasmid]

Fragmentation of the pYT plasmid of the plague pathogen by ten restriction endonucleases has been studied. The evidence has been obtained in support of the possible presence of the movable genetic element containing a HindIII site within the plasmid pYT. The gene encoding the I fraction of the plague pathogen has been cloned. The physical map of the pYT plasmid has been constructed with the use of restriction endonucleases BamHI, XhoI, BstEII, SmaI, EcoRI, and HindIII. The fragment of the plasmid DNA coding for the synthesis of the plague pathogen fraction I has been mapped.     

Structure of cloned ribosomal DNA cistrons from Bacillus thuringiensis.

A library of B. thuringiensis DNA has been prepared by using the plasmid pBR322 as a cloning vehicle and E. coli as a host cell. By screening this collection with specific probes, 17 clones were identified whose hybrid plasmids contain rRNA genes of B. thuringiensis. Several of these plasmids have been mapped with restriction endonucleases and by DNA-RNA hybridization. By using maps of overlapping fragments, we have been able to establish an overall map of the ribosomal gene cluster.     

Physical mapping of strain AD169 human cytomegalovirus DNA

The whole human cytomegalovirus strain AD169 genome was cloned into plasmid pAT153 in the form of 25 HindIII fragments. Double and triple digestions of the recombinant plasmids with restriction endonucleases BamHI, BglII, ClaI, DraI, EcoRI, EcoRV, HindIII, HpaI, KpnI, PaeR7, PstI, SphI and XbaI yielded a detailed restriction map of human cytomegalovirus DNA. Knowing the exact position of numerous restriction sites in the viral DNA molecule, we have been able to examine very closely the heterologous region between the long and the short segments of the human cytomegalovirus genome.