Carrier modification and its application in continuous photo‐hydrogen production using anaerobic fluidized bed photo‐reactor

Poor hydrogen production performance and low biomass limit the practical application of photo‐fermentation. To improve the immobilization capability of bacteria and hydrogen production performance, activated carbon fibers (ACFs) were modified by acidic, alkaline, and neutral solutions. The modified ACFs were further used in the anaerobic fluidized bed photo‐reactor (AFBPR) to explore its continuous operation characteristics. Results showed that among the three reagents, nitric acid was the most efficient for ACF modification, and the maximum yield and production rate of hydrogen increased between about 33.6% and 65.8% compared to the control. Furthermore, with the optimal influent glutamate concentration (10 mmol L^?1) and light intensity (4000 lux), the AFBPR gave efficient and stable performance with hydrogen yield of 2.26 mol H₂ mol^?1 acetate and hydrogen production rate of 25.8 mL L^?1 h^?1. The results showed the potential of using the AFBPR with HNO₃‐modified ACF carriers for the large‐scale production of bio‐hydrogen.     

Offsetting high water demands with high productivity: Sorghum as a biofuel crop in a high irradiance arid ecosystem

High irradiance arid environments are promising, yet understudied, areas for biofuel production. We investigated the productivity and environmental trade‐offs of growing sorghum (Sorghum bicolor) as a biofuel feedstock in the low deserts of California (CA). Using a 5.3 ha experimental field in the Imperial Valley, CA, we measured aboveground biomass production and net ecosystem exchange of CO₂ and H₂O via eddy covariance over three growing periods between February and November 2012. Environmental conditions were extreme, with high irradiance, vapor pressure deficit (VPD), and air temperature throughout the growing season. Air temperature peaked in August with a maximum of 45.7 °C. Sorghum produced an annual aboveground biomass yield of 43.7 Mg per hectare. Net ecosystem exchange (NEE) was highest during the summer growth period and reached a maximum of ?68 μmol CO₂ m^?2 s^?1. Water use efficiency, or biomass water ratio (BWR), was high (4.0 g dry biomass kg^?1 H₂O) despite high seasonal evapotranspiration (1094 kg H₂O m^?2). The BWR of sorghum surpassed that of many C4 biofuel candidate crops in the United States, as well as that of alfalfa which is currently widely grown in the Imperial Valley. Sorghum also outperformed many US biofuel crops in terms of radiation use efficiency (RUE), achieving 1.5 g dry biomass MJ^?1. We found no evidence of saturation of NEE at high levels of photosynthetically active radiation (PAR) (up to 2250 μmol m^?2 s^?1). In addition, we found no evidence that NEE was inhibited by either high VPD or air temperature during peak photosynthetic phases. The combination of high productivity, high BWR, and high RUE suggests that sorghum is well adapted to this extreme environment. The biomass production rates and efficiency metrics spanning three growing periods provide fundamental data for future Life Cycle Assessments (LCA), which are needed to assess the sustainability of this sorghum biofuel feedstock system.     

Using CO2 to enhance carbon capture and biomass applications of freshwater macroalgae

A major limiting factor in the development of algae as a feedstock for the bioenergy industry is the consistent production and supply of biomass. This study is the first to access the suitability of the freshwater macroalgal genus Oedogonium to supply biomass for bioenergy applications. Specifically, we quantified the effect of CO₂ supplementation on the rate of biomass production, carbon capture, and feedstock quality of Oedogonium when cultured in large‐scale outdoor tanks. Oedogonium cultures maintained at a pH of 7.5 through the addition of CO₂ resulted in biomass productivities of 8.33 (±0.51) g DW m^?2 day^?1, which was 2.5 times higher than controls which had an average productivity of 3.37 (±0.75) g DW m^?2 day^?1. Under these productivities, Oedogonium had a carbon content of 41–45% and a higher heating value of 18.5 MJ kg^?1, making it an ideal biomass energy feedstock. The rate of carbon fixation was 1380 g C m^?2 yr^?1 and 1073.1 g C m^?2 yr^?1 for cultures maintained at a pH of 7.5 and 8.5, and 481 g C m^?2 yr^?1 for cultures not supplemented with CO₂. This study highlights the potential of integrating the large‐scale culture of freshwater macroalgae with existing carbon waste streams, for example coal‐fired power stations, both as a tool for carbon sequestration and as an enhanced and sustainable source of bioenergy.     

Effect of organic carbon,C:N ratio and light on the growth and lipid productivity of microalgae/cyanobacteria coculture

Current culture methods based on monocultures under phototrophic regimes are prone to contamination, predation, and collapse. Native cultures of multiple species are adapted to the local conditions and are more robust against contamination and predation. Growth, lipid and biomass productivity of a Louisiana native coculture of microalgae (Chlorella vulgaris) and cyanobacteria (Leptolyngbya sp.) in heterotrophic and mixotrophic regimes were investigated. Dextrose and sodium acetate at C:N ratios of 15:1 and 30:1 under heterotrophic (dark) and mixotrophic (400 μmol m^?2 s^?1) regimes were compared with autotrophic controls. The carbon source and C:N ratio impacted growth and biomass productivity. Mixotrophic cultures with sodium acetate (C:N 15:1) resulted in the highest mean biomass productivity (156 g m^?3 d^?1) and neutral lipid productivity (24.07 g m^?3 d^?1). The maximum net specific growth rate (U) was higher (0.97 d^?1) in mixotrophic cultures with dextrose (C:N 15:1) but could not be sustained resulting in lower total biomass than in mixotrophic cultures with acetate (C:N 15:1), with a U of 0.67 d^?1. The ability of the Louisiana coculture to use organic carbon for biomass and lipid production makes it a viable feedstock for biofuels and bioproducts.     

Enzymatic saccharification of cornstalk by onsite cellulases produced by Trichoderma viride for enhanced biohydrogen production

Lignocellulosic biomass, if properly saccharified, could be an ideal feedstock for biohydrogen production. However, the high cellulases cost is the key obstacle to its development. In this work, cost‐effective enzyme produced by Trichoderma viride was used to saccharify cornstalk. To obtain high sugar yield, a central composite design of response surface method was used to optimize enzymatic saccharification process. Experimental results showed that the enzymatic saccharification rate reached the highest of 81.2% when pH, temperature, cellulases and substrate concentration were 5, 49.7 °C, 35.7 IU g^?1, and 38.5 g L^?1, respectively. The cornstalk hydrolysate was subsequently introduced to fermentation by Thermoanaerobacterium thermosaccharolyticum W16, the yield of hydrogen reached the highest level of 90.6 ml H₂ g^?1 pretreated cornstalk. The present results indicate the potential of using T. thermosaccharolyticum W16 for high yield conversion of cornstalk hydrolysate, which was saccharified by onsite enzyme produced by T. viride.     

Quantifying Actual and Theoretical Ethanol Yields for Switchgrass Strains Using NIRS Analyses

Quantifying actual and theoretical ethanol yields from biomass conversion processes such as simultanteous saccharification and fermentation (SSF) requires expensive, complex fermentation assays, and extensive compositional analyses of the biomass sample. Near-infrared reflectance spectroscopy (NIRS) is a non-destructive technology that can be used to obtain rapid, low-cost, high-throughput, and accurate estimates of agricultural product composition. In this study, broad-based NIRS calibrations were developed for switchgrass biomass that can be used to estimate over 20 components including cell wall and soluble sugars and also ethanol production and pentose sugars released as measured using a laboratory SSF procedure. With this information, an additional 13 complex feedstock traits can be determined including theoretical and actual ethanol yields from hexose fermentation. The NIRS calibrations were used to estimate feedstock composition and conversion information for biomass samples from a multi-year switchgrass (Panicum virgatum L.) biomass cultivar evaluation trial. There were significant differences among switchgrass strains for all biomass conversion and composition traits including actual ethanol yields, ETOHL (L Mg^?1) and theoretical ethanol yields, ETOHTL (L Mg^?1), based on cell wall and non-cell wall composition NIRS analyses. ETOHL means ranged from 98 to 115 L Mg^?1 while ETOHTL means ranged from 203 to 222 L Mg^?1. Because of differences in both biomass yields and conversion efficiency, there were significant differences among strains for both actual (2,534?C3,720 L ha^?1) and theoretical (4,878?C7,888 L ha^?1) ethanol production per hectare. It should be feasible to improve ethanol yields per hectare by improving both biomass yield and conversion efficiency by using NIRS analyses to quantify differences among cultivars and management practices.     

Evaluating a sustainability index for nutrients in a short rotation energy cropping system

In dryland environments 3–5 year rotations of tree crops and agriculture represent a major potential bioenergy feedstock and a means to restore landscape hydrologic balances and phytoremediate sites, while maintaining food production. In soils with low natural fertility, the long‐term viability of these systems will be critically affected by site nutrient status and subsequent cycling of nutrients. A nutrient assimilation index (NAI) was developed to allow comparison of species and tree component nutrient assimilation and to optimize nutrient management, by quantifying different strategies to manage site nutrients. Biomass, nutrient export and nutrient use efficiency were assessed for three short rotation tree crop species. Nutrient exports following harvest at 3 years of high density (4000 trees ha^?1) were consistently higher in Pinus radiata, with values of 85 kg ha^?1 of N, 11kg ha^?1 of P, and 62 kg ha^?1 of K, than Eucalyptus globulus and Eucalyptus occidentalis. Component NAI was generally in the order of leaf?1 for N in leaves of P. radiata to 4.7 Mg kg^?1 for P in stem‐wood of E. occidentalis, indicating higher sustainability of wood biomass compared with leaf biomass. The leaves for each species contained between 40 and 60% of the total nutrient contents while comprising around 25–30% of the total biomass. These nutrient exports via biomass removal are similar to those that follow 3 years of wheat production in the same region, indicating there is no additional drawdown of nutrient reserves during the tree cropping phase of the rotation.     

Effects of harvest frequency and biosolids application on switchgrass yield,feedstock quality,and theoretical ethanol yield

Sustainable development of a bioenergy industry will require low‐cost, high‐yielding biomass feedstock of desirable quality. Switchgrass (Panicum virgatum L.) is one of the primary feedstock candidates in North America, but the potential to grow this biomass crop using fertility from biosolids has not been fully explored. The objective of this study was to examine the effects of harvest frequency and biosolids application on switchgrass in Virginia, USA. ‘Cave‐in‐Rock’ switchgrass from well‐established plots was cut once (November) or twice (July and November) per year between 2010 and 2012. Class A biosolids were applied once at rates of 0, 153, 306, and 459 kg N ha^?1 in May 2010. Biomass yield, neutral and acid detergent fiber, cellulose, hemicellulose, lignin, and ash were determined. Theoretical ethanol potential (TEP, l ethanol Mg^?1 biomass) and yield (TEY, l ethanol ha^?1) were calculated based on cellulose and hemicellulose concentrations. Cutting twice per season produced greater biomass yields than one cutting (11.7 vs. 9.8 Mg ha^?1) in 2011, but no differences were observed in other years. Cutting once produced feedstock with greater TEP (478 vs. 438 l Mg^?1), but no differences in TEY between cutting frequencies. Biosolids applied at 153, 306, and 459 kg N ha^?1 increased biomass yields by 25%, 37%, and 46%, and TEY by 25%, 34%, and 42%, respectively. Biosolids had inconsistent effects on feedstock quality and TEP. A single, end‐of‐season harvest likely will be preferred based on apparent advantages in feedstock quality. Biosolids can serve as an effective alternative to N fertilizer in switchgrass‐to‐energy systems.     

Acclimation Strategy of a Biohydrogen Producing Population in a Continuous‐Flow Reactor with Carbohydrate Fermentation

Poor startup of biological hydrogen production systems can cause an ineffective hydrogen production rate and poor biomass growth at a high hydraulic retention time (HRT), or cause a prolonged period of acclimation. In this paper a new startup strategy was developed in order to improve the enrichment of the hydrogen‐producing population and the efficiency of hydrogen production. A continuously‐stirred tank reactor (CSTR) and molasses were used to evaluate the hydrogen productivity of the sewage sludge microflora at a temperature of 35 °C. The experimental results indicated that the feed to microorganism ratio (F/M ratio) was a key parameter for the enrichment of hydrogen producing sludge in a continuous‐flow reactor. When the initial biomass was inoculated with 6.24 g of volatile suspended solids (VSS)/L, an HRT of 6 h, an initial organic loading rate (OLR) of 7.0 kg chemical oxygen demand (COD)/(m³ × d) and an feed to microorganism ratio (F/M) ratio of about 2–3 g COD/(g of volatile suspended solids (VSS) per day) were maintained during startup. Under these conditions, a hydrogen producing population at an equilibrium state could be established within 30 days. The main liquid fermentation products were acetate and ethanol. Biogas was composed of H₂ and CO₂. The hydrogen content in the biogas amounted to 47.5 %. The average hydrogen yield was 2.01 mol/mol hexose consumed. It was also observed that a special hydrogen producing population was formed when this startup strategy was used. It is supposed that the population may have had some special metabolic pathways to produce hydrogen along with ethanol as the main fermentation products.     

Farm-Scale Cost of Producing Perennial Energy Cane as a Biofuel Feedstock

Energy cane varieties are high-fiber sugarcane clones which represent a promising feedstock in the production of alternative biofuels and biobased products. This study explored the crop establishment and whole farm production costs of growing energy cane as a biofuel feedstock in the southeastern USA. More specifically, total production costs on a feedstock dry matter biomass basis were estimated for five perennial energy cane varieties over alternative crop cycle lengths. Variable production costs for energy cane production were estimated to be in the $63 to $76 Mg^?1 range of biomass dry matter for crop cycles through harvest of fourth through sixth stubble crops. Total production costs, including charges for fixed equipment costs, general farm overhead, and land rent, were estimated to range between $105 and $127 Mg^?1 of feedstock biomass dry matter material.     

Simulating the effects of harvest and biofuel production on the forest system carbon balance of the Midwest,USA

Forests of the Midwestern United States are an important source of fiber for the wood and paper products industries. Scientists, land managers, and policy makers are interested in using woody biomass and/or harvest residue for biofuel feedstocks. However, the effects of increased biomass removal for biofuel production on forest production and forest system carbon balance remain uncertain. We modeled the carbon (C) cycle of the forest system by dividing it into two distinct components: (1) biological (net ecosystem production, net primary production, autotrophic and heterotrophic respiration, vegetation, and soil C content) and (2) industrial (harvest operations and transportation, production, use, and disposal of major wood products including biofuel and associated C emissions). We modeled available woody biomass feedstock and whole‐system carbon balance of 220 000 km² of temperate forests in the Upper Midwest, USA by coupling an ecosystem process model to a collection of greenhouse gas life‐cycle inventory models and simulating seven forest harvest scenarios in the biological ecosystem and three biofuel production scenarios in the industrial system for 50 years. The forest system was a carbon sink (118 g C m^?2 yr^?1) under current management practices and forest product production rates. However, the system became a C source when harvest area was doubled and biofuel production replaced traditional forest products. Total carbon stores in the vegetation and soil increased by 5–10% under low‐intensity management scenarios and current management, but decreased up to 3% under high‐intensity harvest regimes. Increasing harvest residue removal during harvest had more modest effects on forest system C balance and total biomass removal than increasing the rate of clear‐cut harvests or area harvested. Net forest system C balance was significantly, and negatively correlated (R² = 0.67) with biomass harvested, illustrating the trade‐offs between increased C uptake by forests and utilization of woody biomass for biofuel feedstock.     

Carbohydrates Production and Bio-flocculation Characteristics in Cultures of Arthrospira (Spirulina) platensis: Improvements Through Phosphorus Limitation Process

Carbohydrates are a desirable biomass compound for the generation of several biofuels. Phosphorus nutrient limitation causes a significant increase in the carbohydrate content of the cyanobacterium Arthrospira (Spirulina) platensis. Carbohydrates accumulated up to a content of 63.09?±?3.43?% (±SD) in both batch and semi-continuous cultures. In order the production of carbohydrate-rich biomass through nutrient limitation to be maximized, it is suggested that the limited nutrients have to be supplied in amounts that they on one hand can support the biomass production while on the other hand they alter the composition of the biomass. In this study, phosphorus of 1.82?±?0.16?mg g^?1 of dry biomass was the optimized amount for the maximization of carbohydrates production by A. platensis. Regarding the need to decrease the application amounts of nutrients for biomass production, this study demonstrates that the phosphorus supply could be decreased an order of magnitude with no significant decrease in biomass production. In addition, it was observed that biomass rich in carbohydrates bio-flocculates, during settling without the addition of any flocculation agent or any other intervention. The bio-flocculation efficiency appears to be related with the carbohydrate content of the biomass. In maximum carbohydrate content (60?%), the biomass bio-flocculated at 68.49?±?7.73?% the first 15?min and reached 80.25?±?5.58?% 60?min after settling. The produced carbohydrates might be used as feedstock for biofuel generation, while the bio-flocculation and the overall settling characteristics of the carbohydrate-rich biomass could make its harvesting process much easier.     

Impacts of management practices on bioenergy feedstock yield and economic feasibility on Conservation Reserve Program grasslands

Perennial grass mixtures planted on Conservation Reserve Program (CRP) land are a potential source of dedicated bioenergy feedstock. Long‐term nitrogen (N) and harvest management are critical factors for maximizing biomass yield while maintaining the longevity of grass stands. A six‐year farm‐scale study was conducted to understand the impact of weather variability on biomass yield, determine optimal N fertilization and harvest timing management practices for sustainable biomass production, and estimate economic viability at six CRP sites in the United States. Precipitation during the growing season was a critical factor for annual biomass production across all regions, and annual biomass production was severely reduced when growing season precipitation was below 50% of average. The N rate of 112 kg ha^?1 produced the highest biomass yield at each location. Harvest timing resulting in the highest biomass yield was site‐specific and was a factor of predominant grass type, seasonal precipitation, and the number of harvests taken per year. The use of N fertilizer for yield enhancement unambiguously increased the cost of biomass regardless of the harvest timing for all six sites. The breakeven price of biomass at the farmgate ranged from $37 to $311 Mg^?1 depending on the rate of N application, timing of harvesting, and location when foregone opportunity costs were not considered. Breakeven prices ranged from $69 to $526 Mg^?1 when the loss of CRP land rental payments was included as an opportunity cost. Annual cost of the CRP to the federal government could be reduced by over 8% in the states included in this study; however, this would require the biomass price to be much higher than in the case where the landowner receives the CRP land rent. This field research demonstrated the importance of long‐term, farm‐scale research for accurate estimation of biomass feedstock production and economic viability from perennial grasslands.     

Quantifying above‐ and belowground biomass carbon loss with forest conversion in tropical lowlands of Sumatra (Indonesia)

Natural forests in South‐East Asia have been extensively converted into other land‐use systems in the past decades and still show high deforestation rates. Historically, lowland forests have been converted into rubber forests, but more recently, the dominant conversion is into oil palm plantations. While it is expected that the large‐scale conversion has strong effects on the carbon cycle, detailed studies quantifying carbon pools and total net primary production (NPP_total) in above‐ and belowground tree biomass in land‐use systems replacing rainforest (incl. oil palm plantations) are rare so far. We measured above‐ and belowground carbon pools in tree biomass together with NPP_total in natural old‐growth forests, ‘jungle rubber’ agroforests under natural tree cover, and rubber and oil palm monocultures in Sumatra. In total, 32 stands (eight plot replicates per land‐use system) were studied in two different regions. Total tree biomass in the natural forest (mean: 384 Mg ha^?1) was more than two times higher than in jungle rubber stands (147 Mg ha^?1) and >four times higher than in monoculture rubber and oil palm plantations (78 and 50 Mg ha^?1). NPP_total was higher in the natural forest (24 Mg ha^?1 yr^?1) than in the rubber systems (20 and 15 Mg ha^?1 yr^?1), but was highest in the oil palm system (33 Mg ha^?1 yr^?1) due to very high fruit production (15–20 Mg ha^?1 yr^?1). NPP_total was dominated in all systems by aboveground production, but belowground productivity was significantly higher in the natural forest and jungle rubber than in plantations. We conclude that conversion of natural lowland forest into different agricultural systems leads to a strong reduction not only in the biomass carbon pool (up to 166 Mg C ha^?1) but also in carbon sequestration as carbon residence time (i.e. biomass‐C:NPP‐C) was 3–10 times higher in the natural forest than in rubber and oil palm plantations.     

Large‐scale screening and characterisation of Lemna aequinoctialis and Spirodela polyrhiza strains for starch production

• Duckweed is considered a promising feedstock for bioethanol production due to its high biomass and starch production. Selection of duckweed strains with high starch accumulation is essential for application of duckweeds to bioethanol production. Geographic differentiation had a large influence on genetic diversity of duckweeds.
• Biomass production, starch content and starch amount in geographically isolated strains of 20 Lemna aequinoctialis and Spirodela polyrhiza were calculated to evaluate their potential for bioethanol production. The influence of different collection time, culture medium and NaCl concentration on starch accumulation of the best strains were analysed.
• The results showed that biomass production, starch content and starch production of duckweeds demonstrated clonal dependency. The best strain was L. aequinoctialis 6000, with biomass production of 15.38 ± 1.47 g m^?2, starch content of 28.68 ± 1.10% and starch production of 4.39 ± 0.25 g m^?2. Furthermore, starch content of L. aequinoctialis 6000 was highest after 8 h of light, tap water was the best medium for starch induction, and NaCl did not induce starch accumulation.
• This study suggests duckweed biomass production and starch production demonstrate clonal dependency, indicating that extensive clonal comparisons will be required to identify the most suitable isolates for duckweed selective breeding for bioethanol.

     

Miscanthus biomass productivity within US croplands and its potential impact on soil organic carbon

Interest in bioenergy crops is increasing due to their potential to reduce greenhouse gas emissions and dependence on fossil fuels. We combined process‐based and geospatial models to estimate the potential biomass productivity of miscanthus and its potential impact on soil carbon stocks in the croplands of the continental United States. The optimum (climatic potential) rainfed productivity for field‐dried miscanthus biomass ranged from 1 to 23 Mg biomass ha^?1 yr^?1, with a spatial average of 13 Mg ha^?1 yr^?1 and a coefficient of variation of 30%. This variation resulted primarily from the spatial heterogeneity of effective rainfall, growing degree days, temperature, and solar radiation interception. Cultivating miscanthus would result in a soil organic carbon (SOC) sequestration at the rate of 0.16–0.82 Mg C ha^?1 yr^?1 across the croplands due to cessation of tillage and increased biomass carbon input into the soil system. We identified about 81 million ha of cropland, primarily in the eastern United States, that could sustain economically viable (>10 Mg ha^?1 yr^?1) production without supplemental irrigation, of which about 14 million ha would reach optimal miscanthus growth. To meet targets of the US Energy Independence and Security Act of 2007 using miscanthus as feedstock, 19 million ha of cropland would be needed (spatial average 13 Mg ha^?1 yr^?1) or about 16% less than is currently dedicated to US corn‐based ethanol production.     

Energy conversion in an internally illuminated annular‐plate airlift photobioreactor

Algal‐derived therapeutics, bioactive molecules, and fuels produced in photobioreactors (PBRs) are of great scientific and economic interest, but the high cost of production still prevents their widespread use. Specifically, the cost of the energy inputs and the control of the photonic inputs that enable production optimization continue to be problematic. To this end, a novel 55‐L annular‐plate airlift PBR (APAPBR) with internal illumination was designed and characterized for the batch production of algal biomass. The APAPBR was able to convert mixing and photonic energy inputs into Chlorella pituita SG1 biomass at an efficiency of 0.064 (J biomass [J input]^?1), or 0.27 g dry cell weight (DW) W^?1 d^?1. Thanks to a high degree of photon capture and the airlift effect that provided energy‐efficient mixing and mass transfer, this energy conversion is 54% of the theoretical maximum as determined in previous studies. Under these efficiency conditions, C. pituita SG1 was able to grow photoautotrophically to 3.9 ± 0.2 gDW L^?1. Additionally, a mathematical approach was used to predict the mean light intensity with the highest biomass yield per unit of photonic input and the maximum biomass concentration achievable under the given process conditions. These predictions were validated in our system by the experimental cultivation data. This APAPBR represents a simple, innovative, and energy‐efficient PBR configuration that could decrease the cost of phototrophic bioprocesses and enable novel bioprocesses that require a high degree of control over the photonic input.     

Operation strategies for biohydrogen production with a high-rate anaerobic granular sludge bed bioreactor

Long-term operation for biohydrogen production with an efficient carrier-induced granular sludge bed (CIGSB) bioreactor had encountered problems with poor biomass retention at a low hydraulic retention (HRT) as well as poor mass-transfer efficiency at a high HRT or under a prolonged operation period. This work was undertaken to develop strategies enabling better biomass retention and mass-transfer efficiency of the CIGSB reactors. Supplementation of calcium ion was found to enhance mechanical strength of the granular sludge. Addition of 5.4–27.2 mg/l of Ca²⁺ also led to an over three-fold increase in biomass concentration and a nearly five-fold increase in the H₂ production rate (up to 5.1 l H₂/h/l). Two reflux strategies were utilized to enhance the mass-transfer efficiency of the CIGSB system. The liquid reflux (LR) strategy enhanced the H₂ production rate by 2.2-fold at an optimal liquid upflow velocity of 1.09 m/h, which also gave a maximal biomass concentration of ca. 22 g VSS/l. Similar optimal H₂ production rate was also obtained with the gas reflux (GR) strategy at a rate of 1.0–1.49 m/h, whereas the biomass concentration decreased to 2–7 g VSS/l and thereby the specific H₂ production rate was higher than that with LR. The operation strategies applied in this work were effective to allow stable and efficient H₂ production for nearly 100 days.     

Effective biomass harvesting of marine diatom Chaetoceros muelleri by chitosan-induced flocculation,preservation of biomass,and recycling of culture medium for aquaculture feed application

Microalgae are a promising new source of biomass; however, large-scale economical harvesting of microalgal biomass is a major technological and economic challenge, limiting the commercial production of microalgal biomass for high-value compounds. In this study, the cationic polymer chitosan was used for the harvesting of the marine diatom Chaetoceros muelleri. Natural flocculation, and pH and chitosan-induced flocculation were studied in detail. The effects of flocculant dosage, culture pH, initial biomass concentration, and sedimentation time were investigated on biomass recovery. The results showed that flocculation efficiency can reach > 99% with an optimum dosage of chitosan (80 mg L^?1) at pH 9.6 and settling time of 40 minutes for biomass concentration from 0.2 to 1.2 g L^?1. The reusability of the recycled water, preservation of biomass after harvesting, and cost of the harvesting process were evaluated. The results showed that the chitosan-induced flocculation offers an efficient, cost-effective, rapid, and sustainable harvesting method for C. muelleri biomass for food and feed applications in aquaculture.

     

Agave for tequila and biofuels: an economic assessment and potential opportunities

This paper explores the economic viability of producing biofuels from Agave in Mexico and the potential for it to complement the production of tequila or mescal. We focus on Agave varieties currently being used by the tequila industry to produce two beverages, tequila and mescal, and explore the potential for biofuel production from these plants. Without competing directly with beverage production, we discuss the economic costs and benefits of converting Agave by‐products to liquid fuel as an additional value‐added product and expanding cultivation of Agave on available land. We find that the feedstock cost for biofuel from the Agave piña alone could be more than US$3 L^?1 on average. This is considerably higher than the feedstock costs of corn ethanol and sugarcane ethanol. However, there may be potential to reduce these costs with higher conversion efficiencies or by using sugar present in other parts of the plant. The costs of cellulosic biofuels using the biomass from the entire plant could be lower depending on the conversion efficiency of biomass to fuel and the additional costs of harvesting, collecting and transporting that biomass.