Enantioseparation and molecular modeling study of five β‐adrenergic blockers on Chiralpak IC column

A new high‐performance liquid chromatography (HPLC) method was developed for the enantiomeric resolution of five β‐adrenergic blockers on a Chiralpak IC column (250 mm × 4.6 mm, 5.0 μm particle size) in normal phase mode. The mobile phase used was n‐hexane‐ethanol‐diethylamine in different proportions at the flow rate of 1.0 mL/min with the column temperature of 25°C using a UV detector at 230 nm. The influences of base additives and alcohol modifiers were evaluated and optimized. The maximum resolution values for bevantolol, propranolol carteolol, esmolol, and metoprolol were 4.80, 2.77, 2.09, 2.30, and 1.11, respectively. To gain a better understanding of the interaction between chiral stationary phase and analyte enantiomers, the molecular docking of chiral stationary phase with five pairs of enantiomer was carried out using AutoDock molecular docking technique. By simulation studies, the mechanism of chiral recognition was determined. According to the results, hydrogen bond interactions and π‐π interactions were the chief interactions for the chiral recognition.     

Optimization of ASE and SPE conditions for the HPLC‐FLD detection of piperazine in chicken tissues and pork

Accelerated solvent extraction (ASE) and solid‐phase extraction (SPE) conditions were optimized by a high‐performance liquid chromatography‐fluorescence detector (HPLC‐FLD) method for the detection of piperazine in chicken tissues and pork. Piperazine residues were determined by precolumn derivatization with trimethylamine and dansyl chloride. Samples were extracted with 2% formic acid in acetonitrile using an ASE apparatus and purified using a Strata‐X‐C SPE column. The monosubstituted product of the reaction of piperazine with dansyl chloride was 1‐dansyl piperazine (1‐DNS‐piperazine). Chromatographic separations were performed on an Athena C₁₈ column (250 × 4.6 mm, id: 5 μm) with gradient elution using ultrapure water and acetonitrile (5:95, V/V) as the mobile phase. The calibration curves showed good linearity over a concentration range of LOQ‐200.0 μg/kg with a coefficient of determination (R²) ≥ .9992. The recoveries and relative standard deviations (RSD values) ranged from 78.49% to 97.56% and 1.19% to 5.32%, respectively, across the limit of quantification (LOQ) and 0.5, 1, and 2.0 times the maximum residue limit (MRL; μg/kg). The limits of detection (LODs) and LOQs were 0.96 to 1.85 μg/kg and 3.20 to 5.50 μg/kg, respectively. The method was successfully applied for the validation of animal products in the laboratory.     

Simeprevir oxidative degradation product: Molecular modeling,in silico toxicity and resolution by synchronous spectrofluorimetry

In this article, one of the potential degradation products of the novel antiviral drug simeprevir was isolated and characterized by means of infrared (IR) and mass spectrometry. Moreover, comparative molecular docking, ADMET (absorption, distribution, metabolism, excretion – toxicity) and insilico toxicity prediction studies were applied to evaluate the activity of simeprevir and its degradation product. Furthermore,a simple, accurate and selective second derivative synchronous spectrofluorimetric method was developed for the determination of simeprevir in the presence of its oxidative degradation product.The synchronous fluorescence spectra of both compounds were measured in ethanol at pH 2.0 usingΔλ of 140 nm and the peak amplitude of the second derivative spectra were measured at 442 nm. The method was rectilinear over the concentration range of 0.2 to 2.0 μg/ml and validated according to the ICH (International Conference on Harmonization) guidelines. Moreover, the method was statistically compared to the reverse‐phase high‐performance liquid chromatography (RP‐HPLC) method and good results were obtained.     

Chiral separation of aliphatic primary amino alcohols as o‐phthaldialdehyde/mercaptoethanol derivatives on polysaccharide‐based chiral stationary phases

A sensitive chiral high performance liquid chromatography (HPLC) method for the determination of aliphatic primary amino alcohol isomers with o‐phthaldialdehyde/mercaptoethanol precolumn derivatization has been developed and validated. Seven chiral columns were tested in a reversed phase mode. Excellent enantioseparation with the resolution more than 2.0 was achieved on Chiralcel OJ‐3R. The effect of various chromatographic conditions including column temperature, acetonitrile content in the mobile phase, buffer pH, buffer concentration, and buffer type in the mobile phase on the retention and the selectivity was investigated. The final mobile phase consisted of binary mixture of 20mM ammonium formate solution with acetonitrile (75:25; v/v). The analyses were performed at mobile phase flow rate of 1.0 mL/min and the column temperature of 40°C. The fluorescence detection was performed at excitation wavelength of 345 nm and emission wavelength of 450 nm. The developed method was fully validated in terms of linearity, sensitivity, accuracy, precision, intermediate precision, and selectivity according to International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines using internal normalization procedure. The proposed chiral method was proved to be highly sensitive, simple, and rapid and was successfully applied to the determination of D‐Valinol content in commercially available samples of L‐Valinol.     

Micellar liquid chromatographic determination of metformin hydrochloride using fluorimetric detection after pre‐column derivatization: application to pharmacokinetic parameters in immediate and sustained release formulations

An accurate and selective method using micellar liquid chromatography was developed to determine metformin hydrochloride both in its pharmaceutical dosage forms and human plasma. Separation was conducted using a Zorbax SB‐Phenyl (250 × 4.6 mm id) stainless steel column at ambient temperature after pre‐column derivatization with 9,10‐phenanthraquinone. A mobile phase composed of 0.1 M sodium dodecyl sulfate, 10% 1‐propanol and triethylamine (0.3%) in 0.02 M phosphoric acid, adjusted to pH 2.5, was used at a flow rate of 1 ml/min with fluorimetric detection at 450 nm after excitation at 306 nm. The proposed method showed high sensitivity with limit of quantification of 0.35 μg/ml and limit of detection of 0.23 μg/ml, being linear from 0.5 to 3.0 μg/ml. Being highly sensitive, the method could be applied to spiked human plasma, and also to follow the pharmacokinetic parameters of the studied drug in healthy volunteers after administration of both its immediate and sustained release tablet formulations. Such procedures were carried out without any extraction steps, which improves the accuracy and precision of the proposed method when applied to human plasma. Detailed validation procedures were also carried out giving results in accordance with the comparison method. The proposed method has also the advantage of being environmentally safe, where the use of organic solvents is highly limited in comparison with other traditional chromatographic separation methods that depend mainly on a high proportion of organic modifiers. This concept, in turn, emphasizes the application of green chemistry in the analysis of pharmaceutical products. The simplicity, relatively low cost and short analysis time of the suggested method makes it a candidate for routine quality control work.     

A validated HPLC method for the determination of dimethyl‐4,4′‐dimethoxy‐5,6,5′,6′‐dimethylene dioxybiphenyl‐2,2′‐dicarboxylate (DDB) with fluorescence detection in raw material and pill form: application to an in vitro dissolution test and a content uniformity test

A simple, sensitive and rapid HPLC method with fluorescence detection for the determination of dimethyl‐4,4′‐dimethoxy‐5,6,5′,6′‐dimethylene dioxybiphenyl‐2,2′‐dicarboxylate (DDB) in the raw material and pill form was developed. Liquid chromatography was performed on a C₁₈ column (250 × 4.6 mm i.d., 5 µm particle size), the mobile phase consisted of methanol and 0.05 M sodium dihydrogen phosphate buffer (80 : 20, v/v), and the apparent pH of the mobile phase was adjusted to 3. The fluorescence detector was operated at excitation/emission wavelengths of 275/400 nm. The proposed method allows the determination of DDB within concentration range 0.1–1.5 µg/mL with a limit of detection of 0.032 µg/mL, a limit of quantification of 0.097 µg/mL and a correlation coefficient of 0.9997. The proposed method has been successfully applied for the analysis of DDB in its pills with a percentage recovery of 98.45 ± 0.32. The method was fully validated according to ICH guidelines. Moreover, the high sensitivity of the method permits its use in an in vitro dissolution test for DDB under simulated intestinal conditions. In addition, the proposed method was extended to a content uniformity test according to USP guidelines. Copyright © 2014 John Wiley & Sons, Ltd.     

Chromatographic profiles of tryptophan and kynurenine enantiomers derivatized with (S)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole using LC–MS/MS on a triazole‐bonded column

d ‐ and l ‐Tryptophan (Trp) and d ‐ and l ‐kynurenine (KYN) were derivatized with a chiral reagent, (S )‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS), and were separated enantiomerically by high‐performance liquid chromatography (HPLC) equipped with a triazole‐bonded column (Cosmosil HILIC) using tandem mass spectrometric (MS/MS) detection. Effects of column temperature, salt (HCO₂NH₄) concentration, and pH of the mobile phase in the enantiomeric separation, followed by MS detection of (S )‐DBD‐PyNCS‐d ,l ‐Trp and ‐d ,l ‐KYN, were investigated. The mobile phase consisting of CH₃CN/10 mM ammonium formate in H₂O (pH 5.0) (90/10) with a column temperature of 50–60 °C gave satisfactory resolution (R s) and mass‐spectrometric detection. The enantiomeric separation of d ,l ‐Trp and d ,l ‐KYN produced R s values of 2.22 and 2.13, and separation factors (α) of 1.08 and 1.08, for the Trp and KYN enantiomers, respectively. The proposed LC–MS/MS method provided excellent detection sensitivity of both enantiomers of Trp and KYN (5.1–19 nM).     

Simultaneous determination of guaifenesin enantiomers and ambroxol HCl using 50‐mm chiral column for a negligible environmental impact

Chiral stationary phases are conveniently used for enantiomeric separation of drugs by liquid chromatography. Consumption of large volumes of hazardous solvents is considered as a common challenge for the sustainability of this technique. To this end, a columnar chromatography has been adopted using 50‐mm‐length stationary phases. The study comprised five Phenomenex Lux cellulose‐ and amylose‐based columns for the separation of guaifenesin (GUA) enantiomers. In addition, an experimental design was used to optimize the gradient profile for the separation of racemic GUA and ambroxol HCl (AMB) binary mixture. The chromatographic method was achieved using Lux Cellulose‐1 (50 × 4.6 mm) as a chiral stationary phase and ethanol/water as a mobile phase with linear gradient elution of 20% to 70% ethanol in 6 minutes at a flow rate of 1.0 mL min^?1 and UV detection at 270 nm. Linearity ranges were found to be 50 to 1000 μg mL^?1 and 15 to 450 μg mL^?1 for each GUA enantiomer and AMB, respectively. Environmental, health and safety tool was used to assess and compare greenness of the proposed and reported methods. Short column indeed reduces the environmental impact by decreasing waste by about 60% and utilizing only 1‐mL ethanol in the mobile phase. The proposed method is a safer alternative for the simultaneous determination of drugs in their combined pharmaceutical formulation. The method has been validated and compared favorably with a reported one.     

Analysis of flumequine enantiomers in rat plasma by UFLC‐ESI‐MS/MS

In this study the analysis and confirmation of flumequine enantiomers in rat plasma by ultra‐fast liquid chromatography coupled with electron spray ionization mass spectrometry (using propranolol as an internal standard [IS]) was developed and validated. Plasma samples were prepared by liquid–liquid extraction using methyl tert‐butyl ether as the extraction solvent. Direct resolution of the R‐ and S‐isomers was performed on a CHIRALCEL OJ‐RH column (4.6 × 150 mm, 5 μm) using acetonitrile / 0.1% formic acid / 1 mM ammonium acetate as the mobile phase. Detection was operated by electron spray ionization in the selected ion monitoring and positive ion mode. The target ions at m/z 262.1 and m/z 260.1 were selected for the quantification of the enantiomers and IS, respectively. The linear range was 0.5–500 ng/mL. The precisions (coefficient of variation, CV%) and recoveries were 1.43–8.68 and 94.24–106.76%, respectively. The lowest quantitation limit for both enantiomers is 0.5 ng/mL, which is sensitive enough to be applied to sample analysis in other related studies.     

Liquid chromatographic determination of acetylcholine based on pre‐column alkaline cleavage reaction and post‐column tris(2,2′‐bipyridyl)ruthenium(III) chemiluminescence detection

A method for the determination of acetylcholine (ACh) has been developed using liquid chromatography with chemiluminescence detection. This method is based on the pre‐column alkaline cleavage of ACh to form trimethylamine (TMA) and the post‐column tris(2,2′‐bipyridyl)ruthenium(III) chemiluminescence detection of TMA. ACh was converted to TMA with high yield at 180°C in the presence of lithium hydroxide, and the produced TMA was separated on a cation‐exchange/reversed‐phase dual‐functional column using a mixture of 0.2 m potassium phosphate buffer (pH 5.9) and acetonitrile (20:1, v/v) as the mobile phase. The eluate was online mixed with acidic tris(2,2′‐bipyridyl)ruthenium(III) solution, and the generated chemiluminescence was detected. The detection limit (signal‐to‐noise ratio = 3) for ACh was 0.80 nmol/mL, which corresponded to 1.1 pmol TMA per injection volume of 5 µL. This is simple and robust method that does not need an expensive device and unstable enzymes, and was applied to the determination of ACh in pharmaceutical formulations. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of the chiral recognition properties and the column performances of three chiral stationary phases based on cellulose for the enantioseparation of six dihydropyridines by high‐performance liquid chromatography

Separations of six dihydropyridine enantiomers on three commercially available cellulose‐based chiral stationary phases (Chiralcel OD‐RH, Chiralpak IB, and Chiralpak IC) were evaluated with high‐performance liquid chromatography (HPLC). The best enantioseparation of the six chiral drugs was obtained with a Chiralpak IC (250 × 4.6 mm i.d., 5 μm) column. Then the influence of the mobile phase including an alcohol‐modifying agent and alkaline additive on the enantioseparation were investigated and optimized. The optimal mobile phase conditions and maximum resolution for every analyte were as follows respectively: n‐hexane/isopropanol (85:15, v /v) for nimodipine (R  = 5.80) and cinildilpine (R  = 5.65); n‐hexane/isopropanol (92:8, v /v) for nicardipine (R  = 1.76) and nisoldipine (R  = 1.92); and n‐hexane/isopropanol/ethanol (97:2:1, v /v/v) for felodipine (R  = 1.84) and lercanidipine (R  = 1.47). Relative separation mechanisms are discussed based on the separation results, and indicate that the achiral parts in the analytes' structure showed an important influence on the separation of the chiral column.     

Enantiomeric separation of vilanterol trifenatate by chiral liquid chromatography

Vilanterol trifenatate is a novel chiral long‐acting β2‐agonist developed. Vilanterol combined with inhaled corticosteroids can treat COPD and asthma. A simple liquid chromatographic method is developed for the quantitative determination of R‐vilanterol and S‐vilanterol (impurity S). HPLC separation was achieved on Chiralpak ID (250 × 4.6 mm; particle size 5 μm) column using hexane‐ethanol‐ethanolamine (75:25:0.1, v/v/v) as mobile phase at a flow rate of 1.0 mL/min. The resolution is greater than 3.3. Ethanolamine in the mobile phase is vital to enhance chromatographic efficiency and resolution between the isomers. The method was validated with respect to accuracy, specificity, precision, LOD, LOQ, linearity, and robustness as ICH guidelines.     

Simultaneous determination of some dihydroxybenzenesulphonic acid derivatives and their degradation product and main impurity (hydroquinone) by ion‐pair liquid chromatography

A simple and sensitive high‐performance liquid chromatography method was developed and validated for the determination of calcium dobesilate (DOB) or ethamsylate (ETM) in the presence of their degradation product, hydroquinone (HQ). The analyses were carried out on Promosil C₁₈ column (4.6 mm × 250 mm, 5 µm particle size) using an ion‐pair mobile phase consisting of methanol–1.5 mm tetra‐butyl ammonium bromide in 0.06 m phosphate buffer (25 : 75, v/v) at pH 6.0 with fluorescence detection at 286/333 nm. Pindolol was used as an internal standard. The proposed method was found to be rectilinear over the concentration ranges of 0.05–0.5 µg/mL for DOB, 0.1–0.8 µg/mL for ETM and 0.005–0.1 µg/mL for HQ. The method was applied for the determination of the studied drugs in different dosage forms and biological fluids. The results of the proposed method were statistically compared with those obtained by the comparison methods revealing no significance differences in the performance of the methods regarding accuracy and precision. Moreover, applying a time‐programmed fluorescence technique was valuable for the detection of trace amounts of HQ as an impurity and allowed purity testing of ETM or DOB within the BP pharmacopeial limit (0.1%). Copyright © 2013 John Wiley & Sons, Ltd.     

Chiral HPLC Separation and Modeling of Four Stereomers of DL‐Leucine‐DL‐Tryptophan Dipeptide on Amylose Chiral Column

Chiral high‐performance liquid chromatography (HPLC) separation and modeling of four stereomers of DL‐leucine‐tryptophan DL‐dipeptide on AmyCoat‐RP column are described. The mobile phase applied was ammonium acetate (10 mM)‐methanol‐acetonitrile (50:5:45, v/v). The flow rate of the mobile phases was 0.8 mL/min with UV detection at 230 nm. The values of retention factors for LL‐, DD‐, DL‐, and LD‐ stereomers were 2.25, 3.60, 5.00, and 6.50, respectively. The values of separation and resolution factors were 1.60, 1.39, and 1.30 and 7.76, 8.05, and 7.19. The limits of detection and quantitation were ranging from 1.0–2.3 and 5.6–14.0 μg/mL. The simulation studies established the elution orders and the mechanism of chiral recognition. It was seen that π–π connections and hydrogen bondings were the main forces for enantiomeric resolution. The reported chiral HPLC method may be applied for the enantiomeric separation of DL‐leucine‐DL‐tryptophan in unknown matrices. Chirality 28:642–648, 2016. © 2016 Wiley Periodicals, Inc.     

Quantification of three triterpenic acids in dried rosemary using HPLC‐fluorescence detection and 4‐(4,5‐diphenyl‐1H‐imidazole‐2‐yl)benzoyl chloride derivatization

Functional triterpenic acids such as ursolic acid (UA), oleanolic acid (OA) and betulinic acid (BA) are representative ingredients in rosemary that may have health benefits. UA, OA and BA in rosemary extracts were derivatized with 4‐(4,5‐diphenyl‐1H‐imidazole‐2‐yl)benzoyl chloride (DIB‐Cl) and detected using HPLC‐fluorescence (FL). Dried rosemary (50 mg) was ground, added to 3 ml of ethanol, sonicated for 40 min, then the sample solution was added to a mixture of 1% trimethylamine and 1 mM DIB‐Cl in acetonitrile. The mixture was settled for 5 min at room temperature, then the DIB‐triterpenic acid derivatives were separated using a Wakopak Handy ODS column (250 × 4.6 mm, 6 μm) eluted with 25 mM acetate buffer (pH 4.5)/methanol/acetonitrile (= 8:10:82 v/v/v%). The fluorescence intensity of the eluent was monitored at 365 (λ_ex) and 490 nm (λ_em) and the maximum retention time of the derivatives was 30 min. Calibration curves constructed using rosemary extract spiked with standards showed good linearity (r ≥ 0.997) in the range 2.5–100 ng/ml. The detection limits at 3σ for internal BA, UA and OA peaks in rosemary extract were 0.2, 0.4 and 0.5 ng/ml, respectively. This method was used to quantify BA, UA and OA in commercially available dried rosemary products.     

Production and Application of Syringomycin E as an Organic Fungicide Seed Protectant against Pythium Damping‐off

Syringomycin E (SRE) is a cyclic lipodepsinonapeptide with potent antifungal activity and is produced by certain strains of Pseudomonas syringae pv. syringae. In this study, its potential as an organic‐compatible agrofungicide and vegetable seed treatment against the soilborne pathogen Pythium ultimum var. ultimum was examined. A variant of P. syringae pv. syringae strain B301D with enhanced SRE‐producing capabilities was isolated and grown in a bioreactor with SRE yields averaging 50 mg/l in 40 h. SRE was extracted and purified through a large‐scale chromatography system using organic‐compatible processes and reagents. The minimum concentrations of the purified product required to inhibit 50 and 90% of P. ultimum oospore germination were determined as 31.3 and 250 μg/ml, respectively. Drench treatment of cucumber seeds in P. ultimum‐infested potting medium (500 oospores/g) with 50 μg/ml SRE or water with no SRE resulted in 90.2 ± 4.5% and 65.7 ± 4.6% germination rates, respectively. Seed coating with 0.03% (w/w) SRE allowed 65.7 ± 4.6% seedlings to germinate on naturally infested soil while 100.0 ± 0.0% of non‐coated seeds were unable to germinate due to Pythium infection. Organic‐compatible and scalably produced SRE is potentially a novel organic fungicide seed protectant.     

Enantioseparation of nine indanone and tetralone derivatives by HPLC using carboxymethyl‐β‐cyclodextrin as the mobile phase additive

High‐performance liquid chromatography (HPLC) is a powerful method in the area of chiral separation. In this study, a method of HPLC using carboxymethyl‐β‐cyclodextrin (CM‐β‐CD) as chiral selector was developed for enantioseparation of nine indanone and tetralone derivatives. The separation was performed on a conventional C₁₈ column. The optimal mobile phase was a mixture of methanol and 0.05 mol/L phosphate buffer at pH 1.8 (55:45, v /v) containing 22.9 mmol/L CM‐β‐CD. Under such conditions, the resolutions of all analytes were over 1.8 except for Compound F. The results of the study indicate the presence of a complex with 1:1 stoichiometry of the inclusion complex. In addition, it can be inferred from thermodynamic analysis that the behavior of formation of the inclusion complex and enantioseparation occurred simultaneously, while they were driven by different forces. The effect of analyte structure is also discussed.     

Ultrafast liquid chromatographic analysis of erdosteine in human plasma based on fluorimetric detection and precolumn derivatization with 4‐bromomethyl‐7‐methoxycoumarin: Application to pharmacokinetic studies

In this study, a new analytical method for erdosteine (ERD) in plasma based on high‐performance liquid chromatography and a fluorimetric detector, is presented. Precolumn derivatization of ERD with 4‐bromomethyl‐7‐methoxy coumarin (BrMmC) and dibenzo‐18‐crown‐6‐ether as a reaction catalyst led to the production of a fluorescent compound. ERD was monitored by fluorescence with an excitation wavelength λ_ext. = 325 nm and emission wavelength λ_em. = 390 nm. Optimum reaction conditions were carefully studied and optimized. A chromatographic procedure was performed using a C18 column of 150 × 4.6 mm and 3 μm particle size and a mobile phase consisting of methanol:acetonitrile:water (30:30:40, v/v/v) under a flow rate of 0.5 ml min^?1. A calibration plot was established covering analyte concentration range 0.2–3.0 μg ml^?1; the detection limit was 0.015 μg ml^?1 and quantification limit was 0.05 μg ml^?1. Mean recovery was 87.33% and relative standard deviation was calculated to be less than 4.4%. The developed method was successfully used to determine pharmacokinetic preparations of ERD subsequent to administration of a 900 mg dose capsule to a healthy 40‐year‐old woman volunteer.     

Investigation of chromatographic conditions for the separation of cefuroxime axetil and its geometric isomer

The optimal chromatographic conditions for the separation of the syn- and anti-geometric isomers of cefuroxime axetil applying RP-HPLC and micellar liquid chromatography (MLC) methods were investigated. The possibility to separate diastereoisomers of syn- and anti-cefuroxime axetil was observed. Investigations were performed using three columns, two classical silicas and one with hybrid particle technology. Three aqueous-organic and one micellar mobile phases were used. The best results were achieved using micellar mobile phase. Optimization study was performed using different micellar mobile phases. MLC method is sensitive and applicable in purity and stability testing.     

High-performance liquid chromatographic determination of diuretics in urine by micellar liquid chromatography

The use of micellar liquid chromatography for the determination of diuretics in urine by direct injection of the sample into the chromatographic system is discussed. The retention of the urine matrix at the beginning of the chromatograms was observed for different sodium dodecyl sulphate (SDS) mobile phases. The eluent strengths of a hybrid SDS—methanol micellar mobile phase for several diuretics were compared and related to the stationary phase/water partition coefficient with a purely micellar mobile phase. The urine band was appreciably narrower with a mobile phase of 0.05 M SDS—5% methanol (v/v) at 50°C (pH 6.9). With this mobile phase the determination of bendroflumethiazide and chlorthalidone was adequate. Acetazolamide, ethacrynic acid, furosemide, hydrochlorothiazide and probenecid were overlapped by the urine matrix, and the retention of amiloride and triamterene was too long.