Luminescence in Ba2Sr2Al2O7:RE (RE = Tb3+,Eu3+ and Dy3+) novel aluminate phosphors

The luminescence of novel rare earth ( Tb ^{3 +} , Eu ^{3 +} and Dy ^{3 +} )‐activated Ba ₂ Sr ₂ Al ₂ O ₇ phosphors for solid‐state lighting is presented. The aluminate phosphors were synthesized using a one‐step combustion method. X‐Ray diffraction, scanning electron microscopy and photoluminescence characterizations were performed to understand the mechanism of excitation and the corresponding emission in the as‐prepared phosphor, as characterized the phase purity and microstructure. Improvements in the luminescence properties of the phosphors with rare earth concentration were observed. The phosphor hue could be tuned from blue, green and red by proper selection of rare earth ions in typical concentrations. Effective absorption in the near‐ultraviolet region was observed, which makes the phosphor a potential candidate for ultraviolet light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Ca3(PO4)2:Eu3+ phosphor preparation with different morphologies and their fluorescence properties

Ca₃(PO₄)₂:Eu³⁺ phosphor was prepared using a facile chemistry method in the presence of surfactants. The effects of surfactants on the morphology and photoluminescence properties of Ca₃(PO₄)₂:Eu³⁺ phosphor were investigated. The morphology of the phosphor was significantly influenced by the surfactants employed. When nonionic surfactant glyceryl monostearate and anionic surfactant sodium dodecylbenzene sulfonate were employed, the phospor powders are composed of a large number of homogeneous spherical particles with sizes of 0.3–0.6 µm and 2–3 µm, respectively. By contrast, when cationic surfactant cetyltrimethylammonium bromide was used, the morphology of the phosphor is completely different. The product is an excellent cuboid, and the phosphor prepared with 2.5 mmol cetyltrimethylammonium bromide showed higher luminescent intensity than phosphors prepared with the other two types of surfactants. Copyright © 2013 John Wiley & Sons, Ltd.     

Study on luminescence properties of Ce3+ and Eu3+ ions in a nanocrystalline hexagonal Zn4Al22O37 novel system

The present communication is strongly focused on the investigation of synthesis, structural and luminescence properties of cerium (Ce³⁺)- and europium (Eu³⁺)-activated Zn₄Al₂₂O₃₇ phosphors. Ce³⁺- and Eu³⁺-doped Zn₄Al₂₂O₃₇ novel phosphors were prepared using a solution combustion synthesis route. Structural properties were studied using powder X-ray diffraction and high-resolution transverse electron microscopy. The optical properties were studied using ultraviolet–visible light spectroscopy and Fourier transform infrared spectroscopy; luminescence properties were studied using a photoluminescence (PL) technique. The crystal structure of the prepared Zn₄Al₂₂O₃₇ host and Ce³⁺- and Eu³⁺-activated Zn₄Al₂₂O₃₇ phosphors was investigated and was found to have a hexagonal structure. The measured PL emission spectrum of the Ce³⁺-doped Zn₄Al₂₂O₃₇ phosphor showed an intense and broad emission band centred at 421 nm under a 298 nm excitation wavelength. By contrast, the Eu³⁺-doped Zn₄Al₂₂O₃₇ phosphor exhibited two strong and intense emission bands at approximately 594 nm (orange) and 614 nm (red), which were monitored under 395 nm excitation. The Commission Internationale de l’Eclairage (CIE) colour coordinates of the Ce³⁺-doped Zn₄Al₂₂O₃₇ were investigated and found to be x = 0.1567, y = 0.0637 (blue) at 421 nm and for Eu³⁺-doped Zn₄Al₂₂O₃₇ were x = 0.6018, y = 0.3976 (orange) at 594 nm and x = 0.6779, y = 0.3219 (red) at 614 nm emission. The luminescence behaviour of the synthesized phosphors suggested that these phosphors may be used in lighting applications.     

Insights into the discrepant luminescence for BaSiO3:Eu2+ phosphors prepared by solid‐state reaction and precipitation reaction methods

Two synthesis routes, solid‐state reaction and precipitation reaction, were employed to prepare BaSiO₃:Eu²⁺ phosphors in this study. Discrepancies in the luminescence green emission at 505 nm for the solid‐state reaction method sample and in the yellow emission at 570 nm for the sample prepared by the precipitation reaction method, were observed respectively. A detail investigation about the discrepant luminescence of BaSiO₃:Eu²⁺ phosphors was performed by evaluation of X‐ray diffraction (XRD), photoluminescence (PL)/photoluminescence excitation (PLE), decay time and thermal quenching properties. The results showed that the yellow emission was generated from the BaSiO₃:Eu²⁺ phosphor, while the green emission was ascribed to a small amount of Ba₂SiO₄:Eu²⁺ compound that was present in the solid‐state reaction sample. This work clarifies the luminescence properties of Eu²⁺ ions in BaSiO₃ and Ba₂SiO₄ hosts.     

Sol‐gel synthesis and luminescent properties of red‐emitting Y(P,V)O4:Eu3+ phosphors

Eu³⁺‐activated Y(P,V)O₄ phosphors were prepared by the EDTA sol‐gel method, and the corresponding morphologies and luminescent properties were investigated. The sample particles were relatively spheroid with size of 2–3 µm and had a smooth surface. The excitation spectra for Y(P,V)O₄:Eu³⁺ consisted of three strong excitation bands in the 200–350 nm range, which were attributed to a Eu³⁺‐ O^2? charge‐transfer band and ¹A₁?¹ T₁/¹ T₂ transitions in VO₄^3?. The as‐synthesized phosphors exhibited a highly efficient red luminescence at 613 nm due to the Eu^{3+ 5}D₀?⁷ F₂ electric dipole transition. With the increase in the V⁵⁺/P⁵⁺ ratio, the luminescence intensity of the red phosphor under UV excitation was greatly improved due to enhanced VO₄^3? → Eu³⁺ energy transfer. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of UV‐emitting Gd3+‐doped LiCaBO3 phosphor

Incorporating the Gd³⁺ rare earth ion in the LiCaBO₃ host lattice resulted in narrow‐band UV‐B emission peaking at 315 nm, with excitation at 274 nm. The LiCaBO₃:Gd³⁺ phosphor was synthesized via the solid‐state diffusion method. The structural, morphological and luminescence properties of this phosphor were characterized by X‐ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. Electron paramagnetic resonance (EPR) characterization of the as‐prepared phosphors is also reported here. XRD studies confirmed the crystal formation and phase purity of the prepared phosphors. A series of different dopant concentrations was synthesized and the concentration‐quenching effect was studied. Critical energy transfer distance between activator ions was determined and the mechanism governing the concentration quenching is also reported in this paper. Copyright © 2015 John Wiley & Sons, Ltd.     

Rapid synthesis of BaMoO4:Eu3+ red phosphors using microwave irradiation

This study synthesized BaMoO4:Eu³⁺ red phosphors using the microwave method. In addition, the phase composition, morphology, and luminescence properties of the red phosphors were characterized using X-ray diffraction, field-scanning electron microscopy, and photoluminescence spectroscopy. The results revealed that doping red phosphors with different concentrations of Eu³⁺ does not change the crystal structure of the matrix material. The BaMoO₄:Eu³⁺ phosphors exhibited micron-scale irregular polyhedra, which could be excited by ultraviolet light with a wavelength of 395 nm to induce red-light emission. The optimal dosage of Eu³⁺ was 0.08, and the chromaticity coordinates of BaMoO₄:0.08Eu³⁺ phosphors were (0.5869, 0.3099). White light-emitting diode (w-LED) devices manufactured by using a combination of BaMoO₄:0.08Eu³⁺ phosphor and commercially available phosphors exhibited good white-light emission under the excitation of an ultraviolet chip. The BaMoO₄:0.08Eu³⁺ red phosphors that rapidly synthesized under the microwave field are expected to be used in w-LED devices.     

Optical characterization and the energy level scheme for Ce3+‐doped BaY2Si3O10 blue‐emitting phosphor

A series of Ce³⁺‐activated blue‐emitting phosphors BaY₂Si₃O₁₀ (BYSO) was designed and synthesized by a conventional solid‐state method. Upon ultraviolet light (250–370 nm) excitation, the obtained phosphors showed an intense blue emission band centered at 400–427 nm depending on doping concentration, and corresponding to the 5d→4f transition of Ce³⁺. The effects of doping concentration on crystal structure, emitting color, photoluminescence and photoluminescence excitation spectra, as well as the concentration quenching mechanism were studied in detail. The optimal doping concentration of Ce³⁺ in this phosphor was demonstrated to be about 0.75% and the concentration quenching mechanism can be ascribed to electric dipole–dipole interactions with a critical distance of ~38 Å. These fine luminescence properties indicate that BYSO:Ce³⁺ may be a potential blue phosphor for full‐color ultra‐violet (UV) white light emitting diodes (WLEDs).     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of blue long‐lasting BaCa2Al8O15:Eu2+, Dy3+ phosphor

We have synthesized and characterized a new BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ phosphor prepared by the combustion method. X‐ray diffraction, thermoluminescence, scanning electron microscope, time decay and optical spectral analysis photoluminescence excitation, emission spectra were used to characterize the phosphors. Broadband ultraviolet excited luminescence of the BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ was observed in the blue region (λ_max = 435 nm) due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the Eu²⁺ ion. Scanning electron microscopy has been used for exploring the morphological properties of the prepared phosphors. The BaCa₂Al₈O₁₅:Eu²⁺ phosphor has a blue afterglow when Dy³⁺ ions were co‐doped. The thermoluminescence spectra show that the Dy³⁺ ion induces a proper trap in the phosphor with a depth of 0.67 eV and results in a long afterglow phosphorescence. Copyright © 2013 John Wiley & Sons, Ltd.     

Luminescent properties of single‐phase Ba2‐x‐1.5y‐1.5zP2O7:xEu2+,yCe3+, zTb3+ phosphors for white light‐emitting diode

A series of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors was synthesized via a co‐precipitation method, then their crystal structure, quantum efficiency and luminescent properties were analyzed by XRD and FL, respectively. The results showed that these phosphors not only presented the excitation characteristics of Ba₂P₂O₇:xEu²⁺,zTb³⁺, but also exhibited that of the Ba₂P₂O₇:yCe³⁺,zTb³⁺ phosphor. Meanwhile, the tri‐doped phosphor showed a stronger absorption around 320 nm in contrast with the Eu²⁺/Ce³⁺:Tb³⁺ co‐doped phosphor. Not only can energy transfer from Ce³⁺→Eu²⁺ be observed; the energy transfer mechanism from Eu²⁺ to Tb³⁺ is discussed in the tri‐doped system. Ce³⁺ affects the luminescence properties of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors just as the sensitizer whereas Eu²⁺ is considered both as the sensitizer and the activator. The chromaticity coordinates of tri‐doped phosphors excited at 320 nm stayed steadily in the bluish‐white light region,and the emitted color and color temperature (CCT) of these phosphors could be tuned by adjusting the relative contents of Eu²⁺, Ce³⁺ and Tb³⁺. Hence, the single phase Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors may be considered as potential candidates for white light‐emitting diodes.     

Luminescence study of Sm3+,Eu3+-doped Y2Zr2O7 host: optical investigation of greenish yellow to red colour tunable pyrochlore phosphor

Pyrochlore phosphors have shown their worth in modern day lighting in the last few years. Colour tunability of the phosphor is one of the modern techniques used to obtain white light-emitting diodes (WLEDs). In the proposed work, Y₂Zr₂O₇:Sm³⁺,Eu³⁺ phosphors were investigated for WLED applications as well as display devices. A convectional solid-state diffusion method was used to synthesize the proposed phosphors. X-ray diffraction of the proposed phosphors was performed and compared with the standard Inorganic Crystal Structure Database. The crystal structure of the sample was cubic in nature, obtained from Rietveld refinement. Vibrational and morphological studies on the samples were carried out using Fourier transform infrared spectroscopy and scanning electron microscopy analysis. The photoluminescence study of the colour tunable phosphor showed the characteristic peak of Sm³⁺ together with the two sharp peaks of Eu³⁺ ions. Greenish yellow to red colour tunability was observed in the proposed phosphor with enhancement of Eu³⁺ ions. All these results showed the worth of this sample for WLEDs applications as well as in display devices.     

Synthesis and luminescence study of Eu3+‐doped SrYAl3O7 phosphor

Rare‐earth ions play an important role in eco‐friendly solid‐state lighting for the lighting industry. In the present study we were interested in Eu³⁺ ion‐doped inorganic phosphors for near ultraviolet (UV) excited light‐emitting diode (LED) applications. Eu³⁺ ion‐activated SrYAl₃O₇ phosphors were prepared using a solution combustion route at 550°C. Photoluminescence characterization of SrYAl₃O₇:Eu³⁺ phosphors showed a 612 nm emission peak in the red region of the spectrum due to the ⁵D₀→⁷F₂ transition of Eu³⁺ ions under excitation at 395 nm in the near‐UV region and at the 466 nm blue excitation wavelength. These red and blue emissions are supported for white light generation for LED lighting. Structure, bonding between each element of the sample and morphology of the sample were analysed using X‐ray diffraction (XRD) and scanning electron microscopy (SEM), which showed that the samples were crystallized in a well known structure. The phosphor was irradiated with a ⁶⁰Co‐γ (gamma) source at a dose rate of 7.2 kGy/h. Thermoluminescence (TL) studies of these Eu³⁺‐doped SrYAl₃O₇ phosphors were performed using a Nucleonix TL 1009I TL reader. Trapping parameters of this phosphor such as activation energy (E), order of kinetics (b) and frequency factor (s) were calculated using Chen's peak shape method, the initial rise method and Ilich's method.     

Synthesis and optical properties of Eu3+‐substituted glaserite‐type orthovanadates CsK2Y[VO4]2

A new Eu³⁺‐substituted CsK₂Y[VO₄]₂ glaserite‐type orthovanadate phosphor was synthesized by the conventional high temperature solid‐state reaction method. The phase purity was confirmed by powder X‐ray diffraction study and it reveals that all the compositions crystallize in the hexagonal structure. The morphology and elemental composition were measured by FE‐SEM with Energy Dispersive Analysis Of X Rays (EDAX). The band gap is determined by diffuse reflectance spectra. The self‐activated luminescence of the host and Eu³⁺‐substituted luminescence behaviours were studied in detail by photoluminescence spectra. The host CsK₂Y[VO₄]₂ shows green emission, whereas the Eu³⁺‐substituted compositions show red emission. Effect of Eu³⁺ concentrations on the photoluminescence behaviour were also been studied. The Eu³⁺‐doped samples show not only several sharp emission lines but also a broad emission band due to presence of the [VO₄]^3? in the host, which clearly indicates that there is incomplete energy transfer from (VO₄) charge transfer band to Eu³⁺_. The life time of the phosphors also been studied. The Commission Internationale de l'Eclairage (CIE) chromaticity colour coordinates were calculated and it is very much closer to the National Television Standard Committee (NTSC) standards. These investigations evidently reveal that the self‐activated and Eu³⁺‐activated phosphors show a great potential applications as a red phosphor for solid‐state lighting includes white light‐emitting diodes (wLEDs).     

Luminescence study of Dy or Ce activated LiCaBO3 phosphor for γ‐ray and C5+ ion beam irradiation

The photoluminescence and thermoluminescence characteristics of rare earths (Dy or Ce) activated LiCaBO₃ phosphors have been studied. Phosphors were synthesized by modified solid state synthesis. The phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and thermoluminescence (TL) for structural, morphological and luminescence studies. Dy³⁺ activated LiCaBO₃ shows emission at 486 and 577 nm due to ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transition, respectively, whereas the PL emission spectra of Ce³⁺ activated LiCaBO₃ phosphor shows a broad band peaking at 432 nm, which is due to the transition from 5d level to the ground state of the Ce³⁺ ion. The thermoluminescence study was also carried out for both these phosphors for γ‐ray irradiation and carbon beam irradiation. Linearity was studied for a 0.4–3.1 Rad dose γ‐rays. Linear behaviour over this dose range was observed. Gamma ray‐irradiated phosphors were shown to be negligible fading upon storage. All the samples were also studied for 75 MeV C⁵⁺ ion beam exposure in the range of 3.75 × 10¹² – 7.5 × 10¹³ ion cm^–2 fluence. In addition to this, trapping parameters of all the samples were also calculated using Chen's peak shape method. Copyright © 2015 John Wiley & Sons, Ltd.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel red phosphor Ca2YNbO6:Eu3+ for WLEDs

Due to the advantages of good physicochemical properties, thermal stability, and optical properties, double perovskite compounds have received extensive attention. On this basis, a new type of red phosphor, Ca₂YNbO₆:xEu³⁺, was synthesized using a high-temperature solid-phase method. Its phase purity, morphology, elemental composition, absorption spectrum, photoluminescence, thermal stability, and Commission Internationale de l'éclairage (CIE) chromaticity coordinates were thoroughly investigated. The results display that there is no impurity phase in the samples and the convergence factor R_wp = 14.2%; the microscopic particles are uniform and full, and the distribution of each element is uniform. The energy band gap ΔE is between 3.71 eV and 3.65 eV. The luminescence intensity is the best when the doped Eu³⁺ concentration x reaches 0.4, and emits 612 nm red light (⁵D₀→⁷F₂) under 465 nm excitation, and the concentration quenching is attributed to a d–d interaction. The luminescence intensity at 425 K was still 75% of the room temperature luminescence intensity, which indicates that the thermal stability is extremely superior. The CIE chromaticity coordinates (0.6534, 0.3455) of the Ca2YNbO6:0.4Eu³⁺ phosphors are very close to National Television Standards Committee (0.670, 0.330), and the samples have low correlated colour temperature (2656 K) and high colour purity (99.90%). All findings suggest that Ca₂YNbO₆:Eu³⁺ can serve as a substitute for red phosphor in WLEDs.     

Luminescence in Li3Al2(PO4)3:Eu2+

A series of efficient Li₃Al₂(PO₄)₃:Eu²⁺ novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃Al₂(PO₄)₃ phosphor were also investigated. The phosphors were characterized by X‐ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near‐ultraviolet excitation under 310 nm. The emission was observed for Li₃Al₂(PO₄)₃:Eu²⁺ phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu²⁺ was observed in Li₃Al₂(PO₄)₃:Eu²⁺ when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu²⁺ ion by Hg‐free excitation at 310 nm (i.e., solid‐state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Impact of ligand environment on optical,luminescence and thermometric behavior of A3(PO4)2:Sm3+ (A = Ca,Sr) phosphors

The present study investigates the impact of the ligand environment on the luminescence and thermometric behavior of Sm³⁺ doped A₃(PO₄)₂ (A = Sr, Ca) phosphors prepared by combustion synthesis. The structural and luminescent properties of Sm³⁺ ions in the phosphate lattices were investigated using powder X-ray diffraction (PXRD) and photoluminescence (PL) techniques. PXRD results of the synthesized phosphors exhibit the expected phases that are in agreement with their respective standards. Fourier-transform infrared (FTIR) spectroscopy confirms the presence of PO₄ vibrational bands. Upon excitation with near ultraviolet light, the PL studies indicated that Sr₃(PO₄)₂:Sm³⁺ phosphors exhibit a yellow light emission, whereas Ca₃(PO₄)₂:Sm³⁺ phosphors exhibit an emission of orange light. The PL emission results are in accordance with the CIE coordinates, with the Sr₃(PO₄)₂:Sm³⁺ phosphors showing coordinates of (0.56, 0.44), and the Ca₃(PO₄)₂:Sm³⁺ phosphors displaying coordinates of (0.60, 0.40). Thermal analysis shows improved stability of Ca₃(PO₄)₂:Sm³⁺ based on lower weight reduction in thermogravimetric analysis. The effect of temperature on the luminescence properties of the phosphor has been examined upon a 405 nm excitation. By using the fluorescence intensity ratio (FIR) method, the temperature responses of the emission ratios from the Sm³⁺: the ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_7/2 and ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_9/2 emissions are characterized. The Ca₃(PO₄)₂:Sm³⁺ phosphors are more sensitive as compared with the Sr₃(PO₄)₂:Sm³⁺ phosphors. The earlier research findings strongly indicate that these phosphors hold great promise as ideal candidates for applications in non-invasive optical thermometry and solid-state lighting devices.