Development of an optical sensor for chlortetracycline detection based on the fluorescence quenching of l‐tryptophan

A simple and selective spectrofluorimetric method for the detection of chlortetracycline (CTC) was studied. In pH 7.4 buffer medium l ‐tryptophan (l ‐Trp), applied as the fluorescence probe, interacted with CTC resulting in fluorescence quenching of the probe. CTC was detected with maximum excitation and emission wavelengths at λ_ex/λ_em = 275/350 nm. Notably, quenching of fluorescence intensities was positively proportional to the CTC concentration over the range of 0.65–30 μmol L^?1 and the limit of detection was 0.2 μmol L^?1. Effect of temperature shown in Stern?Volmer plots, absorption spectra and fluorescence lifetime determination, indicated that fluorescence quenching of l ‐Trp by CTC was mainly by static quenching. The proposed study used practical samples analysis satisfactorily.     

Silver nanoclusters stabilized with denatured fish sperm DNA and the application on trace mercury ions detection

In this study, fluorescent silver nanoclusters (Ag NCs) were synthesized using denatured fish sperm DNA as the template. In contrast to other methods, this method did not use artificial DNA as the template. After their reaction with denatured fish sperm DNA, Ag⁺ ions were reduced by NaBH₄ to form Ag NCs. The Ag NCs showed a strong fluorescence emission at 650 nm when excited at 585 nm. The fluorescence intensity increased fourfold at pH 3.78, controlled with Britton–Robinson buffer solution. The fluorescence of the Ag NCs was quenched in the presence of trace mercury ions (Hg²⁺) in a weakly acidic medium and nitrogen atmosphere. The extent of the fluorescence quenching of Ag NCs strongly depends on the Hg²⁺ ion concentration over a linear range from 2.0 nmol L^?1 to 3.0 μmol L^?1. The detection limit (3σ/k) for Hg²⁺ was 0.7 nmol L^?1. Thus, a sensitive and rapid method was developed for the detection of Hg²⁺ ions.     

Akaline,saline and mixed saline–alkaline stresses induce physiological and morpho‐anatomical changes in Lotus tenuis shoots

Saline, alkaline and mixed saline–alkaline conditions frequently co‐occur in soil. In this work, we compared these plant stress sources on the legume Lotus tenuis, regarding their effects on shoot growth and leaf and stem anatomy. In addition, we aimed to gain insight on the plant physiological status of stressed plants. We performed pot experiments with four treatments: control without salt (pH = 5.8; EC = 1.2 dS·m^?1) and three stress conditions, saline (100 mm NaCl, pH = 5.8; EC = 11.0 dS·m^?1), alkaline (10 mm NaHCO₃, pH = 8.0, EC = 1.9 dS·m^?1) and mixed salt–alkaline (10 mm NaHCO₃ + 100 mm NaCl, pH = 8.0, EC = 11.0 dS·m^?1). Neutral and alkaline salts produced a similar level of growth inhibition on L. tenuis shoots, whereas their mixture exacerbated their detrimental effects. Our results showed that none of the analysed morpho‐anatomical parameters categorically differentiated one stress from the other. However, NaCl‐ and NaHCO₃‐derived stress could be discriminated to different extents and/or directions of changes in some of the anatomical traits. For example, alkalinity led to increased stomatal opening, unlike NaCl‐treated plants, where a reduction in stomatal aperture was observed. Similarly, plants from the mixed saline–alkaline treatment characteristically lacked palisade mesophyll in their leaves. The stem cross‐section and vessel areas, as well as the number of vascular bundles in the sectioned stem were reduced in all treatments. A rise in the number of vessel elements in the xylem was recorded in NaCl‐treated plants, but not in those treated exclusively with NaHCO_3.     

Fluorescence spectra,fluorescence quantum yield and dissociation constant of sarafloxacin

In this study, the fluorescence spectra of sarafloxacin (SAR) under different pH conditions were investigated to determine the structural changes due to protonation that result from change in pH. At pH < 1.02, SAR exists in the H₃L²⁺ form for which the maximum fluorescence emission wavelength was about 455 nm. At pH 1.87–4.94, SAR exists in the H₂L⁺ form in which H₃L²⁺ loses one proton in the nitrogen molecule at the 1‐position in the quinoline ring. Fluorescence intensity was strong and steady and the maximum emission wavelength was 458 nm. At pH 7.14–9.30, the maximum emission wavelengths were gradually blue shifted to 430 nm with increase in pH, here SAR exists in the form of a bipolar ion HL in which H₂L⁺ loses a carboxyl group proton. At pH > 11.6, HL transforms into anionic L^? in which HL loses one proton from the piperazine ring, leading to a decrease in fluorescence intensity, and the maximum emission wavelength was red shifted to approximately 466 nm. The two‐step dissociation constant pKa for SAR was calculated, pK _a1 was 6.06 ± 0.37 and pK _a2 for SAR was 10.53 ± 0.19. In a pH 3.62 buffer solution with quinine sulfate as the reference, the fluorescence quantum yield of SAR at the maximum excitation wavelength of 276 nm was 0.09.     

The influence of light on copper‐limited growth of an oceanic diatom,Thalassiosira oceanica (Coscinodiscophyceae)

Thalassiosira oceanica (CCMP 1005) was grown over a range of copper concentrations at saturating and subsaturating irradiance to test the hypothesis that Cu and light were interacting essential resources. Growth was a hyperbolic function of irradiance in Cu‐replete medium (263 fmol Cu′ · L^?1) with maximum rates achieved at 200 μmol photons · m^?2 · s^?1. Lowering the Cu concentration at this irradiance to 30.8 fmol Cu′ · L^?1 decreased cellular Cu quota by 7‐fold and reduced growth rate by 50%. Copper‐deficient cells had significantly slower (P < 0.0001) rates of maximum, relative photosynthetic electron transport (rETR_max) than Cu‐sufficient cells, consistent with the role of Cu in photosynthesis in this diatom. In low‐Cu medium (30.8 fmol Cu′ · L^?1), growth rate was best described as a positive, linear function of irradiance and reached the maximum value measured in Cu‐replete cells when irradiance increased to 400 μmol photons · m^?2 · s^?1. Thus, at high light, low‐Cu concentration was no longer limiting to growth: Cu concentration and light interacted strongly to affect growth rate of T. oceanica (P < 0.0001). Relative ETR_max and Cu quota of cells grown at low Cu also increased at 400 μmol photons · m^?2 · s^?1 to levels measured in Cu‐replete cells. Steady‐state uptake rates of Cu‐deficient and sufficient cells were light‐dependent, suggesting that faster growth of T. oceanica under high light and low Cu was a result of light‐stimulated Cu uptake.     

Copper nanocluster‐based fluorescence enhanced determination of d‐penicillamine

Taking advantage of the compelling properties of d ‐penicillamine (d ‐PA) combined with copper, a method for the sensitive and selective determination of d ‐PA was established using copper nanocluster (Cu NC)‐based fluorescence enhancement. d ‐PA molecules containing a thiol compound showed a strong tendency to combine with the surface of Cu NCs, causing the re‐dispersion of nanoclusters and therefore fluorescence intensity was enhanced. Fluorescence enhancement efficiency of Cu NCs induced by d ‐PA was linear, with the d ‐PA concentration varying from 0.6–30 μg ml^?1 (R² = 0.9952) and with a detection limit of 0.54 μg ml^?1. d ‐PA content in human urine samples was detected with recoveries of 104.8–112.99%. Fluorescence‐enhanced determination of d ‐PA using Cu NCs was established for the first time and this rapid, easy and sensitive method should attract much attention for this application.     

Effects of clove oil,essential oil of Lippia alba and 2‐phe anaesthesia on juvenile meagre,Argyrosomus regius (Asso, 1801)

The objectives of this experiment were to (i) determine the efficacy of essential oils of clove (CO) and Lippia alba (EOLA) to induce deep anaesthesia in juvenile specimens (49.0 ± 6.2 g body mass, 16.6 ± 0.8 cm; n = 8 per treatment) of meagre (Argyrosomus regius); and (ii) study the feasibility of these substances, together with 2‐phenoxyethanol (2‐PHE), as potential sedatives [low concentration: (i) EOLA: 12 mg L^?1; (ii) CO: 1 mg L^?1; and (iii) 2‐PHE: 33 mg·L ^?1; n = 8 per treatment] for live fish transport of this species. All test were performed at a constant temperature (18°C). Thus, the main primary stress indicator (plasma cortisol) and secondary factors (plasma metabolites) were evaluated. In addition, growth hormone (GH) mRNA expression was also evaluated in the pituitary gland. The results indicated that EOLA is considered to be effective for deep anaesthesia when the concentration is close to 160 mg L^?1, while CO produces the same effect when lower concentrations are added (40–50 mg L^?1). Regarding sedative concentrations, a significant ~3‐fold increase in plasma cortisol levels was detected in the EOLA group when compared to control specimens. In addition, glucose levels were not reduced and significantly increased (~1.6‐fold) for 2‐PHE in relation to the control fish. None of the anaesthetics promoted a significant difference for GH expression with respect to the control group, but a significant ~2‐fold increase for 2‐PHE treatment with respect to the EOLA exposition was found in this gene expression. Results show that none of the anaesthetics analysed, at least in the ranges of concentrations used in this study (EOLA 12 mg L^?1, CO 1 mg L^?1, 2‐PHE 33 mg L^?1), are recommended for live fish transport, as shown by the absence of inhibition on the stress parameters assessed.     

Combined spectroscopies and molecular docking approach to characterizing the binding interaction of enalapril with bovine serum albumin

The binding interaction between bovine serum albumin (BSA) and enalapril (ENPL) at the imitated physiological conditions (pH = 7.4) was investigated using UV–vis absorption spectroscopy (UV–vis), fluorescence emission spectroscopy (FES), synchronous fluorescence spectroscopy (SFS), Fourier transform infrared spectroscopy (FT‐IR), circular dichroism (CD) and molecular docking methods. It can be deduced from the experimental results from the steady‐state fluorescence spectroscopic titration that the intrinsic BSA fluorescence quenching mechanism induced by ENPL is static quenching, based on the decrease in the BSA quenching constants in the presence of ENPL with increase in temperature and BSA quenching rates >10¹⁰ L mol^?1 sec^?1. This result indicates that the ENPL–BSA complex is formed through an intermolecular interaction of ENPL with BSA. The main bonding forces for interaction of BSA and ENPL are van der Waal's forces and hydrogen bonding interaction based on negative values of Gibbs free energy change (ΔG ⁰), enthalpic change (ΔH ⁰) and entropic change (ΔS ⁰). The binding of ENPL with BSA is an enthalpy‐driven process due to |ΔH °| > |T ΔS °| in the binding process. The results of competitive binding experiments and molecular docking confirm that ENPL binds in BSA sub‐domain IIA (site I) and results in a slight change in BSA conformation, but BSA still retains its α‐helical secondary structure.     

Production rate estimation of mycosporine‐like amino acids in two Arctic melt ponds by stable isotope probing with NAH13CO3

The net carbon uptake rate and net production rate of mycosporine‐like amino acids (MAAs) were measured in phytoplankton from 2 different melt ponds (MPs; closed and open type pond) in the western Arctic Ocean using a ¹³C stable isotope tracer technique. The Research Vessel Araon visited ice‐covered western‐central basins situated at 82°N and 173°E in the summer of 2012, when Arctic sea ice declined to a record minimum. The average net carbon uptake rate of the phytoplankton in polycarbonate (PC) bottles in the closed MP was 3.24 mg C · m^?3 · h^?1 (SD = ±1.12 mg C · m^?3 · h^?1), while that in the open MP was 1.3 mg C · m^?3 · h^?1 (SD = ±0.05 mg C · m^?3 · h^?1). The net production rate of total MAAs in incubated PC bottles was highest (1.44 (SD = ±0.24) ng C · L^?1 · h^?1) in the open MP and lowest (0.05 (SD = ±0.003) ng C · L^?1 · h^?1) in the closed MP. The net production rate of shinorine and palythine in incubated PC bottles at the open MP presented significantly high values 0.76 (SD = ±0.12) ng C · L^?1 · h^?1and 0.53 (SD = ±0.06) ng C · L^?1 · h^?1. Our results showed that high net production rate of MAAs in the open MP was enhanced by a combination of osmotic and UVR stress and that in situ net production rates of individual MAA can be determined using ¹³C tracer in MPs in Arctic sea ice.     

Characterization of a highly Al3+‐selective fluorescence probe based on naphthalimide‐Schiff base and its application to practical water samples

A new fluorescent Al³⁺‐probe, N‐allyl‐4‐[3,3′‐((2‐aminoethyl)azanediyl)‐bis(N´‐(2‐hydroxybenzylidene)propanehy‐drazide)]‐1,8‐naphthalimide ( L ), was designed and synthesized based on 1,8‐naphthalimide. The probe L contains 1,8‐naphthalimide moiety as the fluorophore and a Schiff base as the recognition group. The structure of L was determined by single crystal X‐ray. L emission at 526 nm increased on addition of Al³⁺ under excitation wavelength at 350 nm. L exhibited high selectivity and sensitivity fluorescence emission towards to Al³⁺ in ethanol/Tris–HCl buffer solution (1:1, v/v, pH = 7.2) as compared with other tested metal ions. A good linearity with a correlation coefficient (R²) of 0.99 was observed in the concentration range 2–10 μM. The binding constant and the detection limit of L for Al³⁺ were calculated to 2.6 × 10⁴ M^?1 and 0.34 μM, respectively. The results of experiments that including Job plot, ultraviolet–visible (UV–Vis) light titration, fluorescence titration, ESI‐MS and ¹H NMR titration, indicated a 1:1 stoichiometric complex between L and Al³⁺. L was highly effective in monitoring Al³⁺ in real‐life Yellow River and tap water samples.     

A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

The effects of vitamins and selenium mixture against brain tissue induced by d‐galactosamine

Brain damage is a major complication of fulminant hepatic failure. d ‐Galactosamine (d ‐GalN)‐induced liver toxicity causes damage to brain. The effects of vitamins and selenium mixture against d ‐GalN stimulated brain injury were investigated in this study. Sprague‐Dawley female rats aged 2.0‐2.5 months were used for the study. The rats were divided into four categories. A 0.9% NaCl solution was intraperitoneally given to the experimental rats in the first group. Using gavage technique, the second group of animals were subjected to a formulation consisting of 100 mg·kg^?1·day^?1 vitamin C, 15 mg·kg^?1·day^?1 of β‐carotene, 100 mg·kg^?1·day^?1 of α‐tocopherol in addition to 0.2 mg·kg^?1·day^?1 of sodium selenate for 3 days. The third group was given a single dose of d ‐GalN hydrochloride at the concentration of 500 mg·kg^?1 through a saline injection. The final group was given similar concentrations of both the antioxidant combination and d ‐GalN. Tissue samples were collected under ether anesthesia. The rats treated with d ‐GalN showed brain damage; increased myeloperoxidase, catalase, glutathione peroxidase, glutathione‐S‐transferase, lactate dehydrogenase, and superoxide dismutase activities; and decreased glutathione levels. Treatment with vitamins and selenium combination resulted in alleviation of these alterations in the rats. These findings suggest that administration of the vitamins and selenium combination suppresses oxidative stress and protects brain cells from injury induced by d ‐GalN.     

High‐performance liquid chromatography study of gatifloxacin and sparfloxacin using erythrosine as post‐column resonance Rayleigh scattering reagent and mechanism study

Herein, a highly selective high‐performance liquid chromatography (HPLC) coupled with resonance Rayleigh scattering (RRS) method was developed to detect gatifloxacin (GFLX) and sparfloxacin (SPLX). GFLX and SPLX were first separated by HPLC, then, in pH 4.4 Britton–Robinson (BR) buffer medium, protonic quaternary ammonia cation of GFLX and SPLX reacted with erythrosine (ERY) to form 1:1 ion‐association complexes, which resulted in a significant enhancement of RRS signal. The experimental conditions of HPLC and post‐column RRS have been investigated, including detection wavelength, flow rate, pH, reacting tube length and reaction temperature. Reaction mechanism were studied in detail by calculating the distribution fraction. The maximum RRS signals for GFLX and SPLX were recorded at λ_ex = λ_em = 330 nm. The detection limits were 3.8 ng ml^?1 for GFLX and 17.5 ng ml^?1 for SPLX at a signal‐to‐noise ratio of 3. The developed method was successfully applied to the determination of GFLX and SPLX in water samples. Recoveries from spiked water samples were 97.56–98.85%.     

Graphite oxide‐dispersed CdTe quantum dots nanocomposite for flexible display luminescent membranes

A quantum dot (QD) dispersant material was prepared using graphite oxide (GO). Luminescent films were prepared using polyvinyl alcohol as the polymer matrix. First, water‐soluble CdTe QDs were prepared by wet chemistry and GO was synthesized using a modified Hummers method. X‐Ray diffraction tests showed that the GO reflection peak [001] was 11.9°, which indicates that the d‐spacing is 0.7431 nm; atomic force microscopy showed a GO thickness of 200 nm. Fourier transform infrared spectra showed vibrations at 1624 cm^?1 for the carbonyl groups, and 3260 cm^?1 for the GO samples; the ‐C–O vibration was at 1320 cm^?1 and ‐COOH, ?OH vibrations were at 950 cm^?1. Fluorescent tests showed that pH had an impact on the QD colloidal stability. GO was neutralized before use as the host media for the GO/QDs nanocomposite. The results proved that the resultant nanocomposite is promising for use in brightness enhancement films in flexible displays.     

Investigation of the interaction of aurantio‐obtusin with human serum albumin by spectroscopic and molecular docking methods

The interaction between human serum albumin (HSA) and aurantio‐obtusin was investigated by spectroscopic techniques combined with molecular docking. The Stern–Volmer quenching constants (K_SV) decreased from 8.56 × 10⁵ M^?1 to 5.13 × 10⁵ M^?1 with a rise in temperatures from 289 to 310 K, indicating that aurantio‐obtusin produced a static quenching of the intrinsic fluorescence of HSA. Time‐resolved fluorescence studies proved again that the static quenching mechanism was involved in the interaction. The sign and magnitude of the enthalpy change as well as the entropy change suggested involvement of hydrogen bonding and hydrophobic interaction in aurantio‐obtusin–HSA complex formation. Aurantio‐obtusin binding to HSA produced significant alterations in secondary structures of HSA, as revealed from the time‐resolved fluorescence, Fourier transform infrared (FT‐IR) spectroscopy, three‐dimensional (3D) fluorescence and circular dichroism (CD) spectral results. Molecular docking study and site marker competitive experiment confirmed aurantio‐obtusin bound to HSA at site I (subdomain IIA).     

Intermolecular interaction of fosinopril with bovine serum albumin (BSA): The multi‐spectroscopic and computational investigation

The intermolecular interaction of fosinopril, an angiotensin converting enzyme inhibitor with bovine serum albumin (BSA), has been investigated in physiological buffer (pH 7.4) by multi‐spectroscopic methods and molecular docking technique. The results obtained from fluorescence and UV absorption spectroscopy revealed that the fluorescence quenching mechanism of BSA induced by fosinopril was mediated by the combined dynamic and static quenching, and the static quenching was dominant in this system. The binding constant, K_b, value was found to lie between 2.69 × 10³ and 9.55 × 10³ M^?1 at experimental temperatures (293, 298, 303, and 308 K), implying the low or intermediate binding affinity between fosinopril and BSA. Competitive binding experiments with site markers (phenylbutazone and diazepam) suggested that fosinopril preferentially bound to the site I in sub‐domain IIA on BSA, as evidenced by molecular docking analysis. The negative sign for enthalpy change (ΔH⁰) and entropy change (ΔS⁰) indicated that van der Waals force and hydrogen bonds played important roles in the fosinopril‐BSA interaction, and 8‐anilino‐1‐naphthalenesulfonate binding assay experiments offered evidence of the involvements of hydrophobic interactions. Moreover, spectroscopic results (synchronous fluorescence, 3‐dimensional fluorescence, and Fourier transform infrared spectroscopy) indicated a slight conformational change in BSA upon fosinopril interaction.     

A fluorescent probe for biothiols based on the conjugate addition of thiols to α,β‐unsaturated ester

A sensitive fluorogenic probe 1 for biothiols was developed based on the Michael addition reaction. The probe 1 was readily synthesized via the reaction of 2‐(4′‐hydroxyphenyl) benzimidazole (HPBI) with acryloyl chloride and shows weak fluorescence emission. Upon mixing with biothiols, the fluorescence of 1 is significantly enhanced due to the conjugate addition of thiols to the α,β‐unsaturated carbonyl moiety, thus eliminating the photoinduced electron transfer (PET) quenching of the fluorophore by the intramolecular carbon–carbon double bond. Cysteine (Cys) was selected as the representative thiol in the spectral experiment. A good linear relationship was obtained from 1.0 to 30.0 µmol L^?1 for Cys and the detection limit was 0.17 µmol L^?1. Furthermore, probe 1 was highly selective for biothiols without the interference of some biologically relevant analytes and has been applied to detecting biothiols in human urine samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluorescence‐based sensor for selective and sensitive detection of amoxicillin (Amox) in aqueous medium: Application to pharmaceutical and biomedical analysis

We here for the first time demonstrate an analytical approach for the highly selective and sensitive detection of amoxicillin (Amox) in aqueous medium based on the fluorescence quenching of quantum dots (QDs). The change in fluorescence intensity of mercaptopropionic acid‐capped cadmium sulphide (MPA‐CdS) QDs is attributed to the increasing concentration of Amox. The results show that the fluorescence quenching of QDs by Amox takes place through both static and dynamic types of quenching mechanism. The fluorescence quenching of QDs with increase in concentration of Amox shows the linear range between 5 μg ml^?1 and 30 μg ml^?1 and the limit of detection (LOD) is 5.19 μg ml^?1. There is no interference of excipients, which are commonly present in pharmaceutical formulation and urine samples. For the practical application approach, the developed method has been successfully applied for the determination of Amox in pharmaceutical formulations and urine samples with acceptable results.     

Ambulant 24‐h glucose rhythms mark calendar and biological age in apparently healthy individuals

Glucose metabolism marks health and disease and is causally inferred in the aging process. Ambulant continuous glucose monitoring provides 24‐h glucose rhythms under daily life conditions. We aimed to describe ambulant 24‐h glucose rhythms measured under daily life condition in relation to calendar and biological age in apparently healthy individuals. In the general population and families with propensity for longevity, we studied parameters from 24‐h glucose rhythms; glucose levels; and its variability, obtained by continuous glucose monitoring. Participants were 21 young (aged 22–37 years), 37 middle‐aged (aged 44–72 years) individuals from the general population, and 26 middle‐aged (aged 52–74 years) individuals with propensity for longevity. All were free of diabetes. Compared with young individuals, middle‐aged individuals from the general population had higher mean glucose levels (5.3 vs. 4.7 mmol L^?1, P < 0.001), both diurnally (P < 0.001) and nocturnally (P = 0.002). Glucose variability was higher in the middle‐aged compared with the young (standard deviation 0.70 vs. 0.57 mmol L^?1, P = 0.025). Compared with middle‐aged individuals from the general population, middle‐aged individuals with propensity for longevity had lower overall mean glucose levels (5.2 vs. 5.4 mmol L^?1, P = 0.047), which were more different nocturnally (4.8 vs. 5.2 mmol L^?1, P = 0.003) than diurnally (5.3 vs. 5.5 mmol L^?1, P = 0.14). There were no differences in glucose variability between these groups. Results were independent of body mass index. Among individuals without diabetes, we observed significantly different 24‐h glucose rhythms depending on calendar and biological age.     

Glutathione‐stabilized Cu nanocluster‐based fluorescent probe for sensitive and selective detection of Hg2+ in water

In this paper, an innovative and facile one‐pot method for synthesizing water‐soluble and stable fluorescent Cu nanoclusters (CuNCs), in which glutathione (GSH) served as protecting ligand and ascorbic acid (AA) as reducing agent was reported. The resultant CuNCs emitted blue‐green fluorescence at 440 nm, with a quantum yield (QD) of about 3.08%. In addition, the prepared CuNCs exhibited excellent properties such as good water solubility, photostability and high stability toward high ionic strength. On the basis of the selective quenching of Hg²⁺ on CuNCs fluorescence, which may be the result of Hg²⁺ ion‐induced aggregation of the CuNCs, the CuNCs was used for the selective and sensitive determination of Hg²⁺ in aqueous solution. The proposed analytical strategy permitted detection of Hg²⁺ in a linear range of 4 × 10^?8 to 6 × 10^?5 M, with a detection limit of 2.2 × 10^?8 M. Eventually, the practicability of this sensing approach was confirmed by its successful application to assay Hg²⁺ in tap water, Lotus lake water and river water samples with the quantitative spike recoveries ranging from 96.9% to 105.4%.