Analysis of electron–vibrational interaction in interconfigurational 5d➔4f transition of Eu2+ ions in Na5Ca4(PO4)4F

In this paper, the photoluminescence properties of Eu²⁺‐activated greenish‐blue‐emitting halophosphate phosphor Na₅Ca₄(PO₄)₄F were studied to estimate electron–vibrational interaction (EVI) parameters such as the Huang–Rhys factor, effective phonon energy, Stokes shift and zero phonon line (ZPL) position for various concentrations of dopant. The validity of the results was established by modeling the emission spectra, which was found to be in good agreement with the experimental photoluminescence spectra. Copyright © 2016 John Wiley & Sons, Ltd.     

Eu3+‐tetrakis β‐diketonate complexes for solid‐state lighting application

Eu³⁺–β‐diketonate complexes are used, for example, in solid‐state lighting (SSL) or light‐converting molecular devices. However, their low emission quantum efficiency due to water molecules coordinated to Eu³⁺ and low photostability are still problems to be addressed. To overcome such challenges, we synthesized Eu³⁺ tetrakis complexes based on [Q][Eu(tfaa)₄] and [Q][Eu(dbm)₄] (Q1 = C₂₆H₅₆N⁺, Q2 = C₁₉H₄₂N⁺, and Q3 = C₁₇H₃₈N⁺), replacing the water molecules in the tris stoichiometry. The tetrakis β‐diketonates showed desirable thermal stability for SSL and, under excitation at 390 nm, they displayed the characteristic Eu³⁺ emission in the red spectral region. The quantum efficiencies of the dbm complexes achieved values as high as 51%, while the tfaa complexes exhibited lower quantum efficiencies (28–33%), but which were superior to those reported for the tris complexes. The structures were evaluated using the Sparkle/PM7 model and comparing the theoretical and the experimental Judd–Ofelt parameters. [Q1][Eu(dbm)₄] was used to coat a near‐UV light‐emitting diode (LED), producing a red‐emitting LED prototype that featured the characteristic emission spectrum of [Q1][Eu(dbm)₄]. The emission intensity of this prototype decreased only 7% after 30 h, confirming its high photostability, which is a notable result considering Eu³⁺ complexes, making it a potential candidate for SSL.     

Lasing transition at 1.06 μm emission in Nd3+‐doped borate‐based tellurium calcium zinc niobium oxide glasses for high‐power solid‐state lasers

The spectroscopic properties of Tellurium Calcium Zinc Niobium oxide Borate (TCZNB) glasses of composition (in mol%) 10TeO₂ + 15CaO + 5ZnO + 10 Nb₂O₅ + (60 – x)B₂O₃ + Nd₂O₃ (x = 0.1, 0.5, 1.0 or 1.5 mol%) have been investigated experimentally. The three phenomenological intensity parameters Ω₂, Ω_4, Ω₆ have been calculated using the Judd–Ofelt theory and in turn radiative properties such as radiative transition probabilities, emission cross‐sections, branching ratios and radiative lifetimes have been estimated. The trend found in the JO intensity parameter is Ω₂ > Ω₆ > Ω₄ If Ω₆ > Ω₄, the glass system is favourable for the laser emission ⁴F_3/2 → ⁴I_11/2 in the infrared (IR) wavelength. The experimental values of branching ratio of ⁴F_3/2 → ⁴I_11/2 transition indicate favourable lasing action with low threshold power. The evaluated total radiative transition probabilities (A_T), stimulated emission cross‐section (σ_e) and gain bandwidth parameters (σ_e × Δλ_p) were compared with earlier reports. An energy level analysis has been carried out considering the experimental energy positions of the absorption and emission bands.     

Extraction of Y2O3:Cr3+ nanophosphor by eco‐friendly approach and its suitability for white light‐emitting diode applications

Cr³⁺‐doped Y₂O₃ (0.5–9 mol%) was synthesized by a simple solution combustion method using Aloe vera gel as a fuel/surfactant. The final obtained product was calcined at 750°C for 3 h, which is the lowest temperature reported so far for the synthesis of this compound. The calcined product was confirmed for its crystallinity and purity by powder X‐ray diffraction (PXRD) studies which showed a single‐phase nano cubic phosphor. The particles size estimated by Scherrer formula was in the range of 6–19 nm. The UV–vis spectra showed absorption bands at 198, 272 and 372 nm having band gap energy in the range 4.00–4.26 eV. In order to investigate the possibility of its use in white light emitting display applications, the photoluminescence properties of Cr³⁺‐doped Y₂O₃ nanophosphors were studied at an excitation wavelength in the near ultraviolet (UV) light region (361 nm). The emission spectra consisted of emission peaks in the blue (⁴F_9/2 → ⁶H_15/2), orange (⁴F_9/2 → ⁶H_13/2) and red (⁴F_9/2 → ⁶H_11/2) regions. The CIE coordinates (0.33, 0.33) lie in the white light region. Hence Y₂O₃:Cr³⁺ can be used for white light‐emitting diode (LED) applications.     

Europium‐activated rare earth fluoride (LnF3:Eu3+–Ln = La,Gd) nanocrystals prepared by using ionic liquid/NH4F as a fluorine source via hydrothermal synthesis

Lanthanide (Ln) fluorides are considered exceptional luminescent rigid host matrices for various optical active Ln³⁺ ions due to their high refractive index, high chemical stability and low phonon energy, leading to the low probability of non‐radiative decay, which results in higher photoluminescence quantum yield (PLQY) (usually higher than oxide hosts). In this study, Eu³⁺‐activated Ln fluorides (LnF₃:Eu³⁺–Ln = La, Gd) are synthesized by the hydrothermal method using 1‐butyl‐3‐methylimidazolium tertrafluoroborate [BMIBF₄] and NH₄F as fluorine precursors. The synthesized nanocrystals (NCs) are structurally and morphologically characterized, and their optical properties investigated using spectrofluorometry. The X‐ray diffraction (XRD) patterns of Eu³⁺‐substituted and ‐unsubstituted LnF₃ (prepared from a different fluorine source) are indexed based on the hexagonal and orthorhombic crystal structure, respectively. Average crystalline sizes are calculated using the Scherrer equation and it is found that the synthesized NCs have an average crystalline size of 12–35 nm. Transmission electron microscopy (TEM) images reveal that the NCs are well dispersed and nearly ellipsoid, with an average size of ~ 5 nm. Eu³⁺‐activated NCs show characteristic excitation and emission spectra. The emission spectra show both magnetic (⁵D₀–⁷F₁) and electric (⁵D₀–⁷F₂) dipole transition with appropriate CIE color coordinates; however, the intensity of the magnetic dipole transition is high, which is in accordance with local site symmetry. Owing to their unique size and excellent optical properties, the synthesized NCs may have potential application in the fields bio‐imaging and solar concentrators. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence of EuII in barium zinc orthosilicate: a novel green color emitting phosphor for white‐LEDs

A series of Eu²⁺‐activated barium orthosilicates (BaZnSiO₄) were synthesized using a high‐temperature solid‐state reaction. A photoluminescence excitation study of Eu²⁺ shows a broad absorption band in the range of 270–450 nm, with multiple absorption peak maxima (310, 350 and 400 nm) due to 4f–5d electronic transition. The emission spectra of all the compositions show green color emission (in the spectral region 450–550 nm with a peak maximum at 502 nm and a shoulder at ~ 490 nm) with appropriate Comission Internationale de l'Eclairage (CIE) color coordinates. The two emission peaks are due to the presence of Eu²⁺ in two different Ba sites in the BaZnSiO₄ host lattice. The energy transfers between the Eu²⁺ ions in BaZnSiO₄ host are elucidated from the critical concentration quenching data based on the electronic multipolar interaction. All Eu²⁺‐activated BaZnSiO₄ phosphor materials can be efficiently excited in the ultraviolet (UV) to near UV‐region (270–420 nm), making them attractive candidate as a green phosphor for solid state lighting–white light‐emitting diodes.     

Synthesis,characterization and sol–gel entrapment of a crown ether‐styryl fluoroionophore

The synthesis and initial evaluation of a new dye‐functionalized crown‐ether, 2‐[2‐(2,3,5,6,8,9,11,12,14,15‐decahydro‐1,4,7,10,13,16‐benzohexaoxacyclooctadecin)ethenyl]‐3‐methyl benzothiazolium iodide (denoted BSD), are reported. This molecule contains a benzyl 18‐crown‐6 moiety as the ionophore and a benzothiazolium to spectrally transduce ion binding. Binding of K⁺ to BSD in methanol causes shifts in the both absorbance and fluorescence emission maxima, as well as changes in the molar absorptivity and the emission intensity. Apparent dissociation constants (K_d) in the range 30–65 µ m were measured. In water and neutral buffer, K_d values were approximately 1 m m . BSD was entrapped in sol–gel films composed of methyltriethoxysilane (MTES) and tetraethylorthosilicate (TEOS) with retention of its spectral properties and minimal leaching. K⁺ binding to BSD in sol–gel films immersed in pH 7.4 buffer causes significant fluorescence quenching, with an apparent response time of approximately 2 min and an apparent K_d of 1.5 m m . Copyright © 2009 John Wiley & Sons, Ltd.     

Concentration‐dependent studies of Nd3+‐doped zinc phosphate glasses for NIR photoluminescence at 1.05 μm

Nd³⁺‐doped lead‐free zinc phosphate glasses with the chemical compositions (60‐x) NH₄H₂PO₄ + 20ZnO + 10BaF₂ + 10NaF + xNd₂O₃ (where x = 0.5, 1.0, 1.5, 2.0 and 2.5 mol%) were prepared using a melt quenching technique. Vibrational bands were assigned and clearly elucidated by Raman spectral profiles for all the glass samples. Judd–Ofelt (J–O) intensity parameters (Ω_λ: λ = 2, 4, 6) were obtained from the spectral intensities of different absorption bands of Nd³⁺ ions. Radiative properties such as radiative transition probabilities (A_R), radiative lifetimes (τ_R) and branching ratios (β_R) for different excited states were calculated using J–O parameters. The near infrared (NIR) photoluminescence spectra exhibited three emission bands (⁴F_3/2 level to ⁴I_13/2, ⁴I_11/2 and ⁴I_9/2 states) for all the concentrations of Nd³⁺ ions. Various luminescence properties were studied by varying the Nd³⁺ concentration for the three spectral profiles. Fluorescence decay curves of the ⁴F_3/2 level were recorded. The energy transfer mechanism that leads to quenching of the ⁴F_3/2 state lifetimes was discussed at higher concentration of Nd³⁺ ions. These glasses are suggested as suitable hosts to produce efficient lasing action in NIR region at 1.05 μm.     

Luminescence properties of a novel red phosphor 6LaPO4–3La3PO7–2La7P3O18:Eu3+

Eu³⁺‐doped 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈ red luminescent phosphors were synthesized by co‐deposition and high‐temperature solid‐state methods and its polyphase state was confirmed by X‐ray diffraction analysis. Transmission electron microscopy showed the grain morphology as a mixture of rods and spheres. Luminescence properties of the phosphor were investigated and its red emission parameters were evaluated as a function of Eu³⁺ concentration (3.00–6.00 mol%). Excitation spectra of 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:Eu³⁺ showed strong absorption bands at 280, 395, and 466 nm, while the luminescence spectra exhibited prominent red emission peak centred at 615 nm (⁵D₀→⁷F₂) in the red region. CIE chromaticity coordinates of the 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:5%Eu³⁺ phosphor were (0.668, 0.313) in the red region, and defined its potential application as a red phosphor.     

Trivalent rare‐earth activated hexagonal lanthanum fluoride (LaF3:RE3+, where RE = Tb,Sm, Dy and Tm) nanocrystals: Synthesis and optical properties

The LaF₃ nanocrystals through a facile hydrothermal route with hexagonal structures have been synthesized via doping of trivalent rare earth (RE³⁺) ions – RE = Tb, Sm, Dy and Tm – with rod‐like and perforated morphologies using NH₄F as fluorine precursor. Hexagonal phase formation was confirmed by powder X‐ray diffraction. The crystalline sizes were calculated by the Scherrer equation where found to have an average crystalline size of 12 to 35 nm. The morphological studies of the nanocrystals were carried out by means of transmission electron microscopy (TEM). The LaF₃:Tm³⁺,Sm³⁺ ions show the characteristic emission of Tb³⁺ and Tm³⁺ respectively. In Sm³⁺‐doped LaF₃, three prominent emission peaks at 561, 597 and 641 nm were found, which belong to ⁴G_5/2 → ⁶H_5/2, ⁴G_5/2 → ⁶H_7/2 (magnetic dipole) and ⁴G_5/2 → ⁶H_9/2 (electric dipole) transitions, respectively. The Dy³⁺ activated LaF₃ shows blue and yellow emission and the corresponding CIE color coordinate show white light emission (CCT value 10650 K).     

Crystal structure and luminescence properties of the blue‐green‐emitting Ba9(Lu,Y)2Si6O24:Ce3+ phosphor

Samples of the Ba₉(Lu_2‐xY_x)Si₆O₂₄:Ce³⁺ (x = 0–2) blue‐green phosphors were synthesized by solid‐state reactions. All the samples exhibited a rhombohedral crystal structure. As the Y³⁺ concentration increased, the diffraction peaks shifted to the small angle region and the lattice parameters increased due to the larger ionic radius of Y³⁺ (r = 0.900 Å) compared with that of Lu³⁺ (r = 0.861 Å). Under 400 nm excitation, samples exhibited strong blue‐green emissions around 490 nm. The emission bands had a slight blue shift that resulted from weak crystal‐field splitting with increasing Y³⁺ concentration. Luminescence intensity and quantum efficiency (QE) decreased with increasing Y³⁺ concentration. The internal QE decreased from 74 to 50% and the external QE decreased from 50 to 34% as x increased from 0 to 2. The thermal stability of the Lu series was better than that of the Y‐series. The excitation band peak around 400 nm matched well with the emission light from the efficient near‐ultraviolet (NUV) chip. These results indicate promising applications for these NUV‐based white light‐emitting diodes.     

Redox luminescence switch based on Mn2+‐doped NaYF4:Yb,Er upconversion nanorods

An redox luminescence switch was developed for the sensing of glutathione (GSH), l ‐cysteine (Cys) or l ‐ascorbic acid (AA) based on redox reaction. The Mn²⁺‐doped NaYF₄:Yb,Er upconversion nanorods (UCNRs) with an emission peak located in the red region were synthesized. The luminescence intensity of the UCNRs could be quenched due to the Mn²⁺ could be oxidized to MnO₂ by KMnO₄. Subsequently, when the AA, GSH or Cys was added into the MnO₂ modified upconversion nanosystem, which could reduced MnO₂ to Mn²⁺ and the luminescence intensity was recovered. The concentration ranges of the nanosystem are 0.500–3.375 mM (R² = 0.99) for AA, 0.6250–11.88 mM (R² = 0.99) for GSH and 0.6250–9.375 mM (R² = 0.99) for Cys, respectively.     

Orange‐red emitting europium doped strontium ortho‐silicate phosphor prepared by a solid state reaction method

In the present article we report europium‐doped strontium ortho‐silicates, namely Sr₂SiO₄:xEu³⁺ (x = 1.0, 1.5, 2.0, 2.5 or 3.0 mol%) phosphors, prepared by solid state reaction method. The crystal structures of the sintered phosphors were consistent with orthorhombic crystallography with a Pmna space group. The chemical compositions of the sintered phosphors were confirmed by energy dispersive X‐ray spectroscopy (EDS). Thermoluminescence (TL) kinetic parameters such as activation energy, order of kinetics and frequency factors were calculated by the peak shape method. Orange‐red emission originating from the ⁵D₀–⁷F_J (J = 0, 1, 2, 3) transitions of Eu³⁺ ions could clearly be observed after samples were excited at 395 nm. The combination of these emissions constituted orange‐red light as indicated on the Commission Internationale de l'Eclairage (CIE) chromaticity diagram. Mechanoluminescence (ML) intensity of the prepared phosphor increased linearly with increasing impact velocity of the moving piston that suggests that these phosphors can also be used as sensors to detect the stress of an object. Thus, the present investigation indicates that the piezo‐electricity was responsible for producing ML in the prepared phosphor.     

Ho3+‐doped strontium–aluminium–bismuth–borate glasses for green light emission

Strontium–aluminium–bismuth–borate glasses (SAlBiB) doped with different concentrations of Ho³⁺ were prepared using conventional melt quenching technique and their structural and optical properties investigated. X‐ray diffraction and scanning electron microscopy analysis were used to study the structural properties. Optical properties were studied by measuring the optical absorption and visible luminescence spectra. The Judd–Ofelt (J‐O) theory was applied to evaluate J‐O intensity parameters, Ω_λ (λ = 2, 4 and 6). Using J‐O intensity parameters, radiative properties such as spontaneous transition probabilities (A_R), branching ratios (β_R) and radiative lifetimes (τ_R) were determined. From the emission spectra, a strong green emission nearly at 549 nm corresponding to the transition, ⁵S₂(⁵F₄)→⁵I₈ was observed. Emission peak positions (λ_P), effective bandwidths (Δλ_eff) and stimulated emission cross‐sections (σ_p) were calculated for the observed emission transitions, ⁵F₃→⁵I₈, ⁵S₂(⁵F₄)→⁵I₈ and ⁵F₅→⁵I₈ of Ho³⁺ in all the glass matrices. Chromaticity color coordinates were calculated using the emission spectra. The experimental results suggest that SAlBiB glass matrix with 1.5 mol% of Ho³⁺ has better emission properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Improving green emission of Tb3+ ions in BaO‐B2O3‐P2O5 glasses by means of Al3+ ions

BaO‐B₂O₃‐P₂O₅ glasses doped with a fixed concentration of Tb³⁺ ions and varying concentrations of Al₂O₃ were synthesized, and the influence of the Al³⁺ ion concentration on the luminescence efficiency of the green emission of Tb³⁺ ions was investigated. The optical absorption, excitation, luminescence spectra and fluorescence decay curves of these glasses were recorded at ambient temperature. The emission spectra of terbium ions when excited at 393 nm exhibited two main groups of bands, corresponding to ⁵D₃ → ⁷F_j (blue region) and ⁵D₄ → 7F_j (green region). From these spectra, the radiative parameters, viz., spontaneous emission probability A, total emission probability A_T, radiative lifetime τ and fluorescent branching ratio β, of different transitions originating from the ⁵D₄ level of Tb³⁺ ions were evaluated based on the Judd‐Ofelt theory. A clear increase in the quantum efficiency and luminescence of the green emission of Tb³⁺ ions corresponding to ⁵D₄ → ⁷F₅ transition is observed with increases in the concentration of Al₂O₃ up to 3.0 mol%. The improvement in emission is attributed to the de‐clustering of terbium ions by Al³⁺ ions and also to the possible admixing of wave functions of opposite parities. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and Characterization of the Hemi‐Salen Ligands and Their Triboron Complexes: Spectroscopy and Examination of Anticancer Properties

The synthesis, spectroscopic properties, and in vitro cytotoxicity activity of a series of various salen‐based triboron complexes have been designed and prepared from hemi‐salen ( L ₁ H ₃  –  L ₄ H ₃ ) ligands and BF₃·Et₂O or BPh₃ under simple reaction conditions. The hemi‐salen ( L ₁ H ₃  –  L ₄ H ₃ ) ligands and their BF₂ or BPh₂ chelating triboron complexes were characterized by means of NMR (¹H, ¹³C, ¹⁹F, and ¹¹B) spectra, FT‐IR spectra, UV/VIS spectra, fluorescence spectra, mass spectra, melting point, as well as elemental analysis. The triboron [L _{(1  –  4)} (BF ₂ ) ₃ ] and [L _{(1  –  4)} (BPh ₂ ) ₃ ] complexes were investigated for their absorption and emission properties, and these complexes are also good chelates towards boron(III) fragments such as BF₂ or BPh₂ quantum yield in solution reaching up to 38%. The hemi‐salen ( L ₁ H ₃  –  L ₄ H ₃ ) ligands and their BF₂ or BPh₂ chelating triboron complexes were tested for the in vitro anticancer activity against various cancer and normal cells (HeLa, DLD‐1, ECC‐1, PC‐3, PNT‐1A, and CRL‐4010), and it was found that the cell viability of cancer cells was decreased while most of the healthy cells could still be viable. Also, the cytotoxicity studies showed that anticancer activity of hemi‐salen ( L ₁ H ₃  –  L ₄ H ₃ ) ligands is higher than that of triboron [L _{(1  –  4)} (BF ₂ ) ₃ ] and [L _{(1  –  4)} ( BP h ₂ ) ₃ ] complexes. The hemi‐salen ( L ₁ H ₃  –  L ₄ H ₃ ) ligands showing the strongest cytotoxic effect in PC ‐3 cells were found to exhibit anticancer activity with apoptosis by increasing the level of ROS in the PC ‐3 cells.     

Microwave‐assisted sintering synthesis of greenish‐yellow emitting Sr2SiO4:Eu2+ phosphors

Europium ion (Eu²⁺) doped Sr₂SiO₄ phosphors with greenish‐yellow emission were synthesized using microwave‐assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr₂SiO₄:Eu²⁺ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f‐4d allowed transition of the Eu²⁺ ions. Under an excitation at 361 nm, the Sr₂SiO₄:Eu²⁺ phosphor exhibited a greenish‐yellow emission peak at 541 nm with an International‐Commission‐on‐Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave‐assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.     

Tunable emission from LiBaBO3:Eu3+;Bi3+ phosphor for solid‐state lighting

Europium (Eu³⁺) and bismuth (Bi³⁺) co‐activated LiBaBO₃ powder phosphors were synthesized by a solid‐state reaction and the structure, particle morphology, optical and photoluminescent properties were investigated. X‐Ray diffraction patterns of the LiBaBO₃ phosphors crystallized in a pure monoclinic phase, i.e. there were no secondary phases due to either incidental impurities or undecomposed starting materials. Scanning electron microscopy images showed that the powders were made up of fluffy needle‐like particles that were randomly aligned. The band‐gap of the LiBaBO₃ host was estimated to be 3.33 eV from the UV/vis absorption data. Blue emission was observed from the LiBaBO₃ host, which is ascribed to self‐activation of the host matrix. In addition, greenish‐blue (493 nm) and red (613 nm) emissions were observed from europium‐doped samples and were attributed to the emissions of Eu²⁺ and Eu³⁺, respectively. Furthermore, after codoping with Bi³⁺, the emission intensity of Eu³⁺ located at 613 nm was significantly enhanced. From the Commission Internationale de I′Eclairage (CIE) color coordinates, white emission was observed from LiBa_1–xBO₃:xEu³⁺ (x = 0.020 and 0.025) phosphor powders with color coordinates of x = 0.368, y = 0.378 and x = 0.376, y = 0.366, respectively.     

Optical analysis of RE3+ (RE = Pr3+, Er3+ and Nd3+):cadmium lead boro tellurite glasses

This article reports on the optical characterization of Pr³⁺‐, Er³⁺‐ and Nd³⁺‐doped cadmium lead boro tellurite (CLBT) glasses prepared using the melt quenching method. The visible–near infrared (Vis–NIR) absorption spectra of these glasses were analyzed systematically. On measuring the NIR emission spectra of Er³⁺:CLBT glasses, a broad emission band centered at 1536 nm (⁴I_13/2 → ⁴I_15/2) was observed, as were three NIR emission bands at 900 nm (⁴F_3/2 → ⁴I_9/2), 1069 nm (⁴F_3/2 → ⁴I_11/2) and 1338 nm (⁴F_3/2 → ⁴I_13/2) from Nd³⁺:CLBT glasses and an NIR emission band at 1334 nm (¹G₄ → ³H₅) from Pr³⁺:CLBT glasses at an excitation wavelength (λ_ex) of 514.5 nm (Ar⁺ laser). Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrothermal growth of Zn2SnO4:Eu,Ca for red emission

Zinc stannate (Zn₂SnO₄) and Zn₂SnO₄ codoped with Eu³⁺ and Ca²⁺ (ZTO:Eu,Ca) were synthesized by hydrothermal method and characterized with X‐ray diffraction (XRD), energy‐dispersive X‐ray analysis (EDAX), Raman spectrometer, field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV‐vis) and photoluminescence (PL) spectrophotometers. PL analysis of Zn₂SnO₄ gives broad defect induced emission in the region 500–750 nm. The crystal structure of Zn₂SnO₄ was retained even with a nominal doping of Eu, Ca and its combination in the Zn₂SnO₄. The Eu³⁺ ions were found to occupy the non‐centrosymmetric sites of the Zn₂SnO₄ and gave emissions at 592, 615 and 702 nm. Zn₂SnO₄:Eu,Ca showed red emission at 615 nm attributed to the electronic transition from the excited state ⁵D₀ → ⁷F₂ of the 4f⁶ configuration of Eu³⁺. Nominal codoping of Eu³⁺ and Ca²⁺ ions promoted the quenching of orange emission from Eu³⁺ in Zn₂SnO₄:Eu,Ca.