High capacity substrates as a platform for a DNA probe array genotyping assay

Colloidal silica particles were deposited on a glass substrate to produce high-capacity porous supports for high-density DNA probe arrays. Porous surfaces were used to increase the addressable surface area and number of probes available for hybridization. Surfaces derived from 70-100 nm size particles deposited in films from 0.15 to 2 microns thick exhibited excellent performance in light-directed oligonucleotide synthesis. Evaluation of these substrates in a genotyping assay is reported.     

HIGH CAPACITY SUBSTRATES AS A PLATFORM FOR A DNA PROBE ARRAY GENOTYPING ASSAY

Colloidal silica particles were deposited on a glass substrate to produce high-capacity porous supports for high-density DNA probe arrays. Porous surfaces were used to increase the addressable surface area and number of probes available for hybridization. Surfaces derived from 70–100 nm size particles deposited in films from 0.15 to 2 microns thick exhibited excellent performance in light-directed oligonucleotide synthesis. Evaluation of these substrates in a genotyping assay is reported.     

Kinetics of oligonucleotide hybridization to photolithographically patterned DNA arrays

The hybridization kinetics of oligonucleotide targets to oligonucleotide probe arrays synthesized using photolithographic fabrication methods developed by Affymetrix have been measured. Values for the fundamental adsorption parameters, k(a), k(d), and K, were determined at both room temperature and 45 degrees C by monitoring the hybridization of fluorescently labeled targets to the array. The values for these parameters and the adsorbed target density (相似文献   

HU binding to DNA: evidence for multiple complex formation and DNA bending

HU, a nonspecific histone-like DNA binding protein, participates in a number of genomic events as an accessory protein and forms multiple complexes with DNA. The HU-DNA binding interaction was characterized by fluorescence, generated with the guanosine analogue 3-methyl-8-(2-deoxy-beta-D-ribofuranosyl)isoxanthopterin (3-MI) directly incorporated into DNA duplexes. The stoichiometry and equilibrium binding constants of complexes formed between HU and 13 and 34 bp DNA duplexes were determined using fluorescence anisotropy and analytical ultracentrifugation. These measurements reveal that three HU molecules bind to the 34 bp duplexes, while two HU molecules bind to the 13 bp duplex. The data are well described by an independent binding site model, and the association constants for the first binding event for both duplexes are similar (approximately 1 x 10(6) M(-1)), indicating that HU binding affinity is independent of duplex length. Further analysis of the binding curves in terms of a nonspecific binding model is indicative that HU binding to DNA exhibits little to no cooperativity. The fluorescence intensity also increases upon HU binding, consistent with decreased base stacking and increased solvent exposure of the 3-MI fluorescence probe. These results are suggestive of a local bending or unwinding of the DNA. On the basis of these results we propose a model in which bending of DNA accompanies HU binding. Up to five complex bands are observed in gel mobility shift assays of HU binding to the 34 bp duplexes. We suggest that protein-induced bending of the DNA leads to the observation of complexes in the gel, which have the same molecular weight but different relative mobilities.     

Adsorption of 125I-labeled immunoglobulin G, its F(ab')2 and Fc fragments onto plasma-polymerized films

Plasma-polymerized films were formed on flat glass plates using allylamine, acrylic acid, acrolein, and allylcyanide as monomers. Adsorption of (125)I-labeled-proteins such as immunoglobulin G (IgG), its F(ab')(2) and Fc fragments, and human serum albumin (HSA) was measured on these plasma-polymerized (PP) films covering the glass plates and on commercially available polymer plates. The adsorption isotherm followed the Langmuir equation, from which the binding constant and amount of saturation binding were estimated. We found that, in general, a cationic surface had higher affinity for protein adsorption than an anionic surface. Among the surfaces examined, the PP-allylamine surface showed the highest binding capacity (264.2 nmol/m(2)) for F(ab')(2) fragment: it was remarkably high. Of the surfaces examined, the PP-acrylic acid surface showed the lowest binding capacity (12.8 nmol/m(2)) for F(ab')(2) fragment. The PP-acrylic acid surface also indicated the lowest protein binding capacity for IgG (16.5 nmol/m(2)), Fc-IgG (32.4 nmol/m(2)) and HSA (16.7 nmol/m(2)), respectively. These imply that the PP-acrylic acid film is useful to fabricate as a low protein adsorption material which expected to decrease cell adhesion. Results of our investigation indicate that the plasma-polymerization technique is promising for fabrication of a smart NanoBio-interface which can control the protein adsorption on a solid-phase substrate using a suitable monomer such as allylamine for the large adsorption and acrylic acid for the small adsorption.     

Chemical display of thymine residues flipped out by DNA methyltransferases.

The DNA cytosine-C5 methyltransferase M. Hha I flips its target base out of the DNA helix during interaction with the substrate sequence GCGC. Binary and ternary complexes between M. Hha I and hemimethylated DNA duplexes were used to examine the suitability of four chemical methods to detect flipped-out bases in protein-DNA complexes. These methods probe the structural peculiarities of pyrimidine bases in DNA. We find that in cases when the target cytosine is replaced with thymine (GTGC), KMnO4proved an efficient probe for positive display of flipped-out thymines. The generality of this procedure was further verified by examining a DNA adenine-N6 methyltransferase, M. Taq I, in which case an enhanced reactivity of thymine replacing the target adenine (TCGT) in the recognition sequence TCGA was also observed. Our results support the proposed base-flipping mechanism for adenine methyltransferases, and offer a convenient laboratory tool for detection of flipped-out thymines in protein-DNA complexes.     

Optimization of an oligonucleotide microchip for microbial identification studies: a non-equilibrium dissociation approach

The utility of a high-density oligonucleotide microarray (microchip) for identifying strains of five closely related bacilli ( Bacillus anthracis , Bacillus cereus , Bacillus mycoides , Bacillus medusa and Bacillus subtilis ) was demonstrated using an approach that compares the non-equilibrium dissociation rates ('melting curves') of all probe–target duplexes simultaneously. For this study, a hierarchical set of 30 oligonucleotide probes targeting the 16S ribosomal RNA of these bacilli at multiple levels of specificity (approximate taxonomic ranks of domain, kingdom, order, genus and species) was designed and immobilized in a high-density matrix of gel pads on a glass slide. Reproducible melting curves for probes with different levels of specificity were obtained using an optimized salt concentration. Clear discrimination between perfect match (PM) and mismatch (MM) duplexes was achieved. By normalizing the signals to an internal standard (a universal probe), a more than twofold discrimination (> 2.4×) was achieved between PM and 1-MM duplexes at the dissociation temperature at which 50% of the probe–target duplexes remained intact. This provided excellent differentiation among representatives of different Bacillus species, both individually and in mixtures of two or three. The overall pattern of hybridization derived from this hierarchical probe set also provided a clear 'chip fingerprint' for each of these closely related Bacillus species.     

Use of EDTA derivatization to characterize interactions between oligodeoxyribonucleoside methylphosphonates and nucleic acids

EDTA-derivatized oligonucleoside methylphosphonates were prepared and used to characterize hybridization between the oligomers and single-stranded DNA or RNA. The melting temperatures of duplexes formed between an oligodeoxyribonucleotide 35-mer and complementary methylphosphonate 12-mers were 4-12 degrees C higher than those of duplexes formed by oligodeoxyribonucleotide 12-mers as determined by spectrophotometric measurements. Derivatization of the methylphosphonate oligomers with EDTA reduced the melting temperature by 5 degrees C. Methylphosphonate oligomer-nucleic acid complexes were stabilized by base stacking interactions between the terminal bases of the two oligomers binding to adjacent binding sites on the target. In the presence of Fe2+ and DTT, the EDTA-derivatized oligomers produce hydroxyl radicals that cause degradation of the sugar-phosphate backbone of both targeted DNA and RNA. Degradation occurs specifically in the region of the oligomer binding site and is approximately 20-fold more efficient for single-stranded DNA than for RNA. In comparison to the presence of one oligomer, the extent of target degradation was increased considerably by additions of two oligomers that bind at adjacent sites on the target. For example, the extent of degradation of a single-stranded DNA 35-mer caused by two contiguously binding oligomers, one of which was derivatized by EDTA, was approximately 2 times greater than that caused by the EDTA-derivatized oligomer alone. Although EDTA-derivatized oligomers are stable for long periods of time in aqueous solution, they undergo rapid autodegradation in the presence of Fe2+ and DTT with half-lives of approximately 30 min. This autodegradation reaction renders the EDTA-derivatized oligomers unable to cause degradation of their complementary target nucleic acids.(ABSTRACT TRUNCATED AT 250 WORDS)     

Capture of genomic DNA on glass microscope slides

It is well known that DNA strands bind to silica surfaces in the presence of high concentrations of chaotropic salts. We developed simple methods to evaluate binding and recovery of DNA on flat glass microscope slides and compared their properties with commercially available silica "spin columns". Surprisingly, genomic DNA was recovered efficiently from untreated glass slides. Binding and elution times from glass slides were optimized in experiments with DNA samples of various sizes and defined buffers. Average DNA recovery from 500 ng of input genomic DNA varied from 25 to 53% for the glass slide protocol. Yields were comparable to those of spin columns. Human serum albumin and plasma components decreased DNA binding to glass several-fold in a concentration-dependent manner. These results support the concept of using flat glass slides as DNA purification surfaces in microfluidic devices for PCR sample preparation.     

Mismatch and G-Stack Modulated Probe Signals on SNP Microarrays

Background

Single nucleotide polymorphism (SNP) arrays are important tools widely used for genotyping and copy number estimation. This technology utilizes the specific affinity of fragmented DNA for binding to surface-attached oligonucleotide DNA probes. We analyze the variability of the probe signals of Affymetrix GeneChip SNP arrays as a function of the probe sequence to identify relevant sequence motifs which potentially cause systematic biases of genotyping and copy number estimates.

Methodology/Principal Findings

The probe design of GeneChip SNP arrays enables us to disentangle different sources of intensity modulations such as the number of mismatches per duplex, matched and mismatched base pairings including nearest and next-nearest neighbors and their position along the probe sequence. The effect of probe sequence was estimated in terms of triple-motifs with central matches and mismatches which include all 256 combinations of possible base pairings. The probe/target interactions on the chip can be decomposed into nearest neighbor contributions which correlate well with free energy terms of DNA/DNA-interactions in solution. The effect of mismatches is about twice as large as that of canonical pairings. Runs of guanines (G) and the particular type of mismatched pairings formed in cross-allelic probe/target duplexes constitute sources of systematic biases of the probe signals with consequences for genotyping and copy number estimates. The poly-G effect seems to be related to the crowded arrangement of probes which facilitates complex formation of neighboring probes with at minimum three adjacent G''s in their sequence.

Conclusions

The applied method of “triple-averaging” represents a model-free approach to estimate the mean intensity contributions of different sequence motifs which can be applied in calibration algorithms to correct signal values for sequence effects. Rules for appropriate sequence corrections are suggested.     

Recognition of base pair inversions in duplex by chimeric (alpha,beta) triplex-forming oligonucleotides

DNA recognition by triplex-forming oligonucleotides (TFOs) is usually limited by homopurine-homopyrimidine sequence in duplexes. Modifications of the third strand may overcome this limitation. Chimeric alpha-beta TFOs are expected to form triplex DNA upon binding to non-regular sequence duplexes. In the present study we describe binding properties of chimeric alpha-beta oligodeoxynucleotides in the respect to short DNA duplexes with one, three, and five base pair inversions. Non-natural chimeric TFO's contained alpha-thymidine residues inside (GT) or (GA) core sequences. Modified residues were addressed to AT/TA inversions in duplexes. It was found in the non-denaturing gel-electrophoresis experiments that single or five adjacent base pair inversions in duplexes may be recognized by chimeric alpha-beta TFO's at 10 degrees C and pH 7.8. Three dispersed base pair inversions in the double stranded DNA prevented triplex formation by either (GT) or (GA) chimeras. Estimation of thermal stability of chimeric alpha-beta triplexes showed decrease in T(m) values as compared with unmodified complexes.     

Free energy of DNA duplex formation on short oligonucleotide microarrays

DNA/DNA duplex formation is the basic mechanism that is used in genome tiling arrays and SNP arrays manufactured by Affymetrix. However, detailed knowledge of the physical process is still lacking. In this study, we show a free energy analysis of DNA/DNA duplex formation these arrays based on the positional-dependent nearest-neighbor (PDNN) model, which was developed previously for describing DNA/RNA duplex formation on expression microarrays. Our results showed that the two ends of a probe contribute less to the stability of the duplexes and that there is a microarray surface effect on binding affinities. We also showed that free energy cost of a single mismatch depends on the bases adjacent to the mismatch site and obtained a comprehensive table of the cost of a single mismatch under all possible combination of adjacent bases. The mismatch costs were found to be correlated with those determined in aqueous solution. We further demonstrate that the DNA copy number estimated from the SNP array correlates negatively with the target length; this is presumably caused by inefficient PCR amplification for long fragments. These results provide important insights into the molecular mechanisms of microarray technology and have implications for microarray design and the interpretation of observed data.     

Discrimination between perfect and mismatched duplexes with oligonucleotide gel microchips: role of thermodynamic and kinetic effects during hybridization

The efficiency of discrimination between perfect and mismatched duplexes during hybridization on microchips depends on the concentrations of target DNA in solution and immobilized probes, buffer composition, and temperature of hybridization and is determined by both thermodynamic relationships and hybridization kinetics. In this work, optimal conditions of discrimination were studied using hybridization of fluorescently labeled target DNA with custom-made gel-based oligonucleotide microchips. The higher the concentration of immobilized probes and the higher the association constant, the higher the concentration of the formed duplexes and the stronger the corresponding fluorescence signal, but, simultaneously, the longer the time needed to reach equilibrium. Since mismatched duplexes hybridize faster than their perfect counterparts, perfect-to-mismatch signal ratio is lower in transient regime, and short hybridization times may hamper the detection of mutations. The saturation time can be shortened by decreasing the probe concentration or augmenting the gel porosity. This improves the detection of mutations in transient regime. It is shown that the decrease in the initial concentration of oligonucleotide probes by an order of magnitude causes only 1.5-2.5-fold decrease of fluorescence signals after hybridization of perfect duplexes for 3-12 h. At the same time, these conditions improve the discrimination between perfect and mismatched duplexes more than two-fold. A similar improvement may be obtained using an optimized dissociation procedure.     

DNA complexes, formed on aqueous phase surfaces: new planar polymeric and composite nanostructures

The formation of DNA complexes with Langmuir monolayers of the cationic lipid octadecylamine (ODA) and the new amphiphilic polycation poly-4-vinylpyridine with 16% of cetylpyridinium groups (PVP-16) on the surface of an aqueous solution of native DNA of low ionic strength was studied. Topographic images of Langmuir-Blodgett films of DNA/ODA and DNA/PVP-16 complexes applied to micaceous substrates were investigated by the method of atomic force microscopy. It was found that films of the amphiphilic polycation have an ordered planar polycrystalline structure. The morphology of planar DNA complexes with the amphiphilic cation substantially depended on the incubation time and the phase state of the monolayer on the surface of the aqueous DNA solution. Complex structures and individual DNA molecules were observed on the surface of the amphiphilic monolayer. Along with quasi-linear individual bound DNA molecules, characteristic extended net-like structures and quasi-circular toroidal condensed conformations of planar DNA complexes were detected. Mono- and multilayer films of DNA/PVP-16 complexes were used as templates and nanoreactors for the synthesis of inorganic nanostructures via the binding of metal cations from the solution and subsequent generation of the inorganic phase. As a result, ultrathin polymeric composite films with integrated DNA building blocks and quasi-linear arrays of inorganic semiconductor (CdS) and iron oxide nanoparticles and nanowires were obtained. The nanostructures obtained were characterized by scanning probe microscopy and transmission electron microscopy techniques. The methods developed are promising for investigating the mechanisms of structural organization and transformation in DNA and polyelectrolyte complexes at the gas-liquid interface and for the design of new extremely thin highly ordered planar polymeric and composite materials, films, and coatings with controlled ultrastructure for applications in nanoelectronics and nanobiotechnology.     

Modification of yeast metabolism by immobilization onto porous glass

Summary Porous glass beads are used to immobilizeSaccharomyces carlsbergensis cells. If silica pores are large enough, adsorption occurs. On the other hand, activation of the silica by glutaraldehyde allows the cells to bind onto the support. In the other case, the most porous glass has the greatest retention capacities. In all cases, 15 min is sufficient for support saturation by microorganisms.The study of glucose fermentation in immobilized cells shows that immobilization modifies the metabolism. Adsorption leads to an acceleration of metabolism, while a slowing down of the cell's activity follows covalent binding. Nevertheless, in both cases yield of glucose converted into ethanol increases while yield of glucose converted into carbon dioxide decreases.     

Fabrication of DNA microarrays using unmodified oligonucleotide probes

Microarrays printed on glass slides are often constructed by covalently linking oligonucleotide probes to a derivatized surface. These procedures typically require relatively expensive amine- or thiol-modified oligonucleotide probes that add considerable expense to larger arrays. We describe a system by which unmodified oligonucleotide probes are bound to either nonderivatized or epoxy-silane-derivatized glass slides. Biotinylated PCR products are heat denatured, hybridized to the arrays, and detected using an enzymatic amplification system. Unmodified probes appear to detach from the slide surface at high pH (> 10.0), suggesting that hydrogen bonding plays a significant role in probe attachment. Regardless of surface preparation, high temperature (up to 65 degrees C) and low ionic strength (deionized water) do not disturb probe attachment; hence, the fabrication method described here is suitable for a wide range of hybridization stringencies and conditions. We illustrate kinetics of room temperature hybridizations for probes attached to nonderivatized slides, and we demonstrate that unmodified probes produce hybridization signals equal to amine-modified, covalently bound probes. Our method provides a cost-effective alternative to conventional attachment strategies that is particularly suitable for genotyping PCR products with nucleic acid microarrays.     

Relative stabilities of triple helices composed of combinations of DNA, RNA and 2'-O-methyl-RNA backbones: chimeric circular oligonucleotides as probes.

Described is a systematic study of the effects of varied backbone structure on the stabilities of pyr.pur.pyr triple helices. The effects were measured using six circular 34 base oligonucleotides containing DNA (D), RNA (R) and/or 2'-O-methyl-RNA (M) residues designed to bind a complementary single-stranded purine target strand by triple helix formation. Eighteen different backbone combinations were studied at pH 5.5 and 7.0 by optical melting experiments and the results compared with the stabilities of the corresponding Watson-Crick duplexes. When the target purine strand is DNA, all circles form pH-dependent triple helical complexes which are considerably stronger than the duplexes alone. When RNA is the target, five of the nine complexes studied are of the pH-dependent triplex type and the other four complexes are not significantly stronger than the corresponding duplexes. The results are useful in the design of the highest affinity ligands for single- and double-stranded DNAs and RNAs and also point out novel ways to engender DNA- or RNA-selective binding.     

Interactions of oligonucleotide analogs containing methylphosphonate internucleotide linkages and 2'-O-methylribonucleosides.

The interactions of oligonucleotide analogs, 12-mers, which contain deoxyribo- or 2'-O-methylribose sugars and methylphosphonate internucleotide linkages with complementary 12-mer DNA and RNA targets and the effect of chirality of the methylphosphonate linkage on oligomer-target interactions was studied. Oligomers containing a single Rp or Sp methylphosphonate linkage (type 1) or oligomers containing a single phosphodiester linkage at the 5'-end followed by 10 contiguous methylphosphonate linkages of random chirality (type 2) were prepared. The deoxyribo- and 2'-O-methylribo- type 1 12-mers formed stable duplexes with both the RNA and DNA as determined by UV melting experiments. The melting temperatures, Tms, of the 2'-O-methylribo-12-mer/RNA duplexes (49-53 degrees C) were higher than those of the deoxyribo-12mer/RNA duplexes (31-36 degrees C). The Tms of the duplexes formed by the Rp isomers of these oligomers were approximately 3-5 degrees C higher than those formed by the corresponding Sp isomers. The deoxyribo type 2 12-mer formed a stable duplex, Tm 34 degrees C, with the DNA target and a much less stable duplex with the RNA target, Tm < 5 degrees C. In contrast, the 2'-O-methylribo type 2 12-mer formed a stable duplex with the RNA target, Tm 20 degrees C, and a duplex of lower stability with the DNA target, Tm < 5 degrees C. These results show that the previously observed greater stability of oligo-2'-O-methylribonucleotide/RNA duplexes versus oligodeoxyribonucleotide/RNA duplexes extends to oligomers containing methylphosphonate linkages and that the configuration of the methylphosphonate linkage strongly influences the stability of the duplexes.     

Determination of microsatellite repeats in the human thyroid peroxidase (TPOX) gene using an automated gene analysis system with nanoscale engineered biomagnetite

The number of repeat in the microsatellite region (AATG)(5-14) of the human thyroid peroxidase gene (TOPX) was determined using an automated DNA analysis system with nano-scale engineered biomagnetite. Thermal melting curve analysis of DNA duplexes on biomagnetite indicated that shorter repeat sequences (less than 9 repeats) were easily discriminated. However, it was difficult to determine the number of repeats at more than nine. In order to improve the selectivity of this method for the longer repeats, a "double probe hybridization assay" was performed in which an intermediate probe was used to replace a target repeat sequence having more than 9 repeats with a shorter sequence possessing less than 9 repeats. Thermal probe melting curve analyses and Tm determination confirmed that the target with 10 repeats was converted to 5 repeats, 11 repeats converted to 4 and 12 to 3, respectively. Furthermore, rapid determination of repeat numbers was possible by measuring fluorescence intensities obtained by probe dissociation at 56 and 66 degrees C, and 40, 60 and 80 degrees C for signal normalization.     

Binding of distamycin A and netropsin to the 12mer DNA duplexes containing mixed AT.GC sequences with at most five or three successive AT base pairs

Circular dichroism (CD), isothermal calorimetric titrations (ITC), and temperature-dependent UV spectroscopy were used to investigate binding of the minor groove-directed ligands distamycin A (Dst) and netropsin (Net) to the following duplexes: d(GTTAGTATTTGG). d(CCAAATACTAAC), d(GTTAGTATATGG).d(CCATATACTAAC), d(GTTAGTACTTGG). d(CCAAGTACTAAC), and d(GTTAGTAGTTGG).d(CCAACTACTAAC). Our results reveal that Dst binds within the minor grooves of these dodecamers that contain five-AT and/or four-AT.GC binding sites exclusively in a dimeric high-affinity 2:1 binding mode (K approximately 10(16) M(-)(2)). By contrast, Net exhibits high-affinity binding only when it binds in a 1:1 mode (K(1) approximately 10(9) M(-)(1)) to the two duplexes that contain five-AT sites (5'-TATTT-3' and 5'-TATAT-3'). Its further binding to these two duplexes occurs in a low-affinity mode (K(2) approximately 10(6) M(-)(1)) and results in the formation of 2:1 Net-DNA complexes. To the other two duplexes that contain sequences with at most three AT consecutive base pairs Net binds in two distinctive low-affinity 1:1 binding modes (K(1) approximately 10(7) M(-)(1), K(2) approximately 10(6) M(-)(1)). Competition experiments (CD and ITC titrations) reveal that Dst entirely displaces Net from its 1:1 and 2:1 complexes with any of the four duplexes. We discuss and interpret our optical and calorimetric results in the context of the available structural information about the complexes between DNA and the sequence-specific minor groove binders Dst and Net.