Conformational dynamics of wild-type Lys-48-linked diubiquitin in solution

Proteasomal degradation is mediated through modification of target proteins by Lys-48-linked polyubiquitin (polyUb) chain, which interacts with several binding partners in this pathway through hydrophobic surfaces on individual Ub units. However, the previously reported crystal structures of Lys-48-linked diUb exhibit a closed conformation with sequestered hydrophobic surfaces. NMR studies on mutated Lys-48-linked diUb indicated a pH-dependent conformational equilibrium between closed and open states with the predominance of the former under neutral conditions (90% at pH 6.8). To address the question of how Ub-binding proteins can efficiently access the sequestered hydrophobic surfaces of Ub chains, we revisited the conformational dynamics of Lys-48-linked diUb in solution using wild-type diUb and cyclic forms of diUb in which the Ub units are connected through two Lys-48-mediated isopeptide bonds. Our newly determined crystal structure of wild-type diUb showed an open conformation, whereas NMR analyses of cyclic Lys-48-linked diUb in solution revealed that its structure resembled the closed conformation observed in previous crystal structures. Comparison of a chemical shift of wild-type diUb with that of monomeric Ub and cyclic diUb, which mimic the open and closed states, respectively, with regard to the exposure of hydrophobic surfaces to the solvent indicates that wild-type Lys-48-linked diUb in solution predominantly exhibits the open conformation (75% at pH 7.0), which becomes more populated upon lowering pH. The intrinsic properties of Lys-48-linked Ub chains to adopt the open conformation may be advantageous for interacting with Ub-binding proteins.     

Crystal structure of cyclic Lys48-linked tetraubiquitin

Lys48-linked polyubiquitin chains serve as a signal for protein degradation by 26S proteasomes through its Ile44 hydrophobic patches interactions. The individual ubiquitin units of each chain are conjugated through an isopeptide bond between Lys48 and the C-terminal Gly76 of the preceding units. The conformation of Lys48-linked tetraubiquitin has been shown to change dynamically depending on solution pH. Here we enzymatically synthesized a wild-type Lys48-linked tetraubiquitin for structural study. In the synthesis, cyclic and non-cyclic species were obtained as major and minor fractions, respectively. This enabled us to solve the crystal structure of tetraubiquitin exclusively with native Lys48-linkages at 1.85 Å resolution in low pH 4.6. The crystallographic data clearly showed that the C-terminus of the first ubiquitin is conjugated to the Lys48 residue of the fourth ubiquitin. The overall structure is quite similar to the closed form of engineered tetraubiquitin at near-neutral pH 6.7, previously reported, in which the Ile44 hydrophobic patches face each other. The structure of the second and the third ubiquitin units [Ub(2)-Ub(3)] connected through a native isopeptide bond is significantly different from the conformations of the corresponding linkage of the engineered tetraubiquitins, whereas the structures of Ub(1)-Ub(2) and Ub(3)-Ub(4) isopeptide bonds are almost identical to those of the previously reported structures. From these observations, we suggest that the flexible nature of the isopeptide linkage thus observed contributes to the structural arrangements of ubiquitin chains exemplified by the pH-dependent closed-to-open conformational transition of tetraubiquitin.     

Crystal structure and solution NMR studies of Lys48-linked tetraubiquitin at neutral pH

Ubiquitin modification of proteins is used as a signal in many cellular processes. Lysine side-chains can be modified by a single ubiquitin or by a polyubiquitin chain, which is defined by an isopeptide bond between the C terminus of one ubiquitin and a specific lysine in a neighboring ubiquitin. Polyubiquitin conformations that result from different lysine linkages presumably differentiate their roles and ability to bind specific targets and enzymes. However, conflicting results have been obtained regarding the precise conformation of Lys48-linked tetraubiquitin. We report the crystal structure of Lys48-linked tetraubiquitin at near-neutral pH. The two tetraubiquitin complexes in the asymmetric unit show the complete connectivity of the chain and the molecular details of the interactions. This tetraubiquitin conformation is consistent with our NMR data as well as with previous studies of diubiquitin and tetraubiquitin in solution at neutral pH. The structure provides a basis for understanding Lys48-linked polyubiquitin recognition under physiological conditions.     

Structural determinants for selective recognition of a Lys48-linked polyubiquitin chain by a UBA domain

Although functional diversity in polyubiquitin chain signaling has been ascribed to the ability of differently linked chains to bind in a distinctive manner to effector proteins, structural models of such interactions have been lacking. Here, we use NMR to unveil the structural basis of selective recognition of Lys48-linked di- and tetraubiquitin chains by the UBA2 domain of hHR23A. Although the interaction of UBA2 with Lys48-linked diubiquitin involves the same hydrophobic surface on each ubiquitin unit as that utilized in monoubiquitin:UBA complexes, our results show how the "closed" conformation of Lys48-linked diubiquitin is crucial for high-affinity binding. Moreover, recognition of Lys48-linked diubiquitin involves a unique epitope on UBA, which allows the formation of a sandwich-like diubiqutin:UBA complex. Studies of the UBA-tetraubiquitin interaction suggest that this mode of UBA binding to diubiquitin is relevant for longer chains.     

Mapping the interactions between Lys48 and Lys63-linked di-ubiquitins and a ubiquitin-interacting motif of S5a

Numerous cellular processes are regulated by (poly)ubiquitin-mediated signaling events, which involve a covalent modification of the substrate protein by a single ubiquitin or a chain of ubiquitin molecules linked via a specific lysine. Remarkably, the outcome of polyubiquitination is linkage-dependent. For example, Lys48-linked chains are the principal signal for proteasomal degradation, while Lys63-linked chains act as nonproteolytic signals. Despite significant progress in characterization of various cellular pathways involving ubiquitin, understanding of the structural details of polyubiquitin chain recognition by downstream cellular effectors is missing. Here we use NMR to study the interaction of a ubiquitin-interacting motif (UIM) of the proteasomal subunit S5a with di-ubiquitin, the simplest model for polyubiquitin chain, to gain insights into the mechanism of polyubiquitin recognition by the proteasome. We have mapped the binding interface and characterized the stoichiometry and the process of UIM binding to Lys48- and Lys63-linked di-ubiquitin chains. Our data provide the first direct evidence that UIM binding involves a conformational transition in Lys48-linked di-ubiquitin, which opens the hydrophobic interdomain interface. This allows UIM to enter the interface and bind directly to the same ubiquitin hydrophobic-patch surface as utilized in UIM:monoubiquitin complexes. The results indicate that up to two UIM molecules can bind di-ubiquitin, and the binding interface between UIM and ubiquitin units in di-ubiquitin is essentially the same for both Lys48- and Lys63-linked chains. Our data suggest possible structural models for the binding of UIM and of full-length S5a to di-ubiquitin.     

Dynamic behaviour of ubiquitin receptor S5a in free and complex with K48-linked diubiquitin

S5a is a critical component of proteasome and carries ubiquitin recognition function. Previous nuclear magnetic resonance (NMR) experiments have shown that K48-linked diubiquitin binds to S5a through a major and a minor conformational species. Molecular dynamics simulations have been performed on S5a and S5a:K48-linked diubiquitin complex extracted from both species to investigate the essential dynamic behaviour of the receptor S5a in free and complex with the diubiquitin. It shows that structures of S5a as well as S5a:diubiquitin complex are very mobile during the simulations, which enables the receptor to undergo a conformational interconversion from the minor to major species or vice versa, though finally the receptor alone tends to adopt a tight packed structure. The binding of diubiquitin to S5a reduces the structural mobility of the receptor, however, it is still able to cover the different conformations within each species of the complex. Despite the high mobility of the structures, the binding of ubiquitin interacting with motif 2 (UIM2) is always stronger than the UIM1 to the ubiquitin subunit. Accordingly, the current dynamic study provides a vivid view how the receptor in free and complex with diubiquitin sampled the multiple conformations as well as their exchanges revealed in two NMR structures.     

Mechanism of Lys48-linked polyubiquitin chain recognition by the Mud1 UBA domain

The ubiquitin-pathway associated (UBA) domain is a 40-residue polyubiquitin-binding motif. The Schizosaccharomyces pombe protein Mud1 is an ortholog of the Saccharomyces cerevisiae DNA-damage response protein Ddi1 and binds to K48-linked polyubiquitin through its UBA domain. We have solved the crystal structure of Mud1 UBA at 1.8 angstroms resolution, revealing a canonical three-helical UBA fold. We have probed the interactions of this domain using mutagenesis, surface plasmon resonance, NMR and analytical ultracentrifugation. We show that the ubiquitin-binding surface of Mud1 UBA extends beyond previously recognized motifs and can be functionally dissected into primary and secondary ubiquitin-binding sites. Mutation of Phe330 to alanine, a residue exposed between helices 2 and 3, significantly reduces the affinity of the Mud1 UBA domain for K48-linked polyubiquitin, despite leaving the primary binding surface functionally intact. Moreover, K48-linked diubiquitin binds a single Mud1 UBA domain even in the presence of excess UBA. We therefore propose a mechanism for the recognition of K48-linked polyubiquitin chains by Mud1 in which diubiquitin units are specifically recognized by a single UBA domain.     

Effects of cyclization on conformational dynamics and binding properties of Lys48-linked di-ubiquitin

In solution, Lys48-linked di-ubiquitin exists in dynamic equilibrium between closed and open conformations. To understand the effect of interdomain motion in polyubiquitin chains on their ability to bind ligands, we cyclized di-ubiquitin by cross-linking the free C terminus of the proximal ubiquitin with the side chain of residue 48 in the distal ubiquitin, using a chemical cross-linker, 1,6-Hexane-bis-vinylsulfone. Our NMR studies confirm that the cyclization affects conformational dynamics in di-ubiquitin by restricting opening of the interface and shifting the conformational equilibrium toward closed conformations. The cyclization, however, did not rigidly lock di-ubiquitin in a single closed conformation: The chain undergoes slow exchange between at least two closed conformations, characterized by interdomain contacts involving the same hydrophobic patch residues (Leu8-Ile44-Val70) as in the uncyclized di-ubiquitin. Lowering the pH changes the relative populations of these conformations, but in contrast with the uncyclized di-ubiquitin, does not lead to opening of the interface. This restriction of domain motions inhibits direct access of protein molecules to the hydrophobic patch residues located at the very center of the interdomain interface in di-ubiquitin, although the residual motions are sufficient to allow access of small molecules to the interface. This renders di-ubiquitin unable to bind protein molecules (e.g., UBA2 domain) in the normal manner, and thus could interfere with Ub(2) recognition by various downstream effectors. These results emphasize the importance of the opening/closing domain motions for the recognition and function of di-ubiquitin and possibly longer polyubiquitin chains.     

Evidence for cooperative and domain-specific binding of the signal transducing adaptor molecule 2 (STAM2) to Lys63-linked diubiquitin

As the upstream component of the ESCRT (endosomal sorting complexes required for transport) machinery, the ESCRT-0 complex is responsible for directing ubiquitinated membrane proteins to the multivesicular body pathway. ESCRT-0 is formed by two subunits known as Hrs (hepatocyte growth factor-regulated substrate) and STAM (signal transducing adaptor molecule), both of which harbor multiple ubiquitin-binding domains (UBDs). In particular, STAM2 possesses two UBDs, the VHS (Vps27/Hrs/Stam) and UIM (ubiquitin interacting motif) domains, connected by a 20-amino acid flexible linker. In the present study, we report the interactions of the UIM domain and VHS-UIM construct of STAM2 with monoubiquitin (Ub), Lys(48)- and Lys(63)-linked diubiquitins. Our results demonstrate that the UIM domain alone binds monoubiquitin, Lys(48)- and Lys(63)-linked diubiquitins with the same affinity and in the same binding mode. Interestingly, binding of VHS-UIM to Lys(63)-linked diubiquitin is not only avid, but also cooperative. We also show that the distal domain of Lys(63)-linked diubiquitin stabilizes the helical structure of the UIM domain and that the corresponding complex adopts a specific structural organization responsible for its greater affinity. In contrast, binding of VHS-UIM to Lys(48)-linked diubiquitin and monoubiquitin is not cooperative and does not show any avidity. These results may explain the better sorting efficiency of some cargoes polyubiquitinated with Lys(63)-linked chains over monoubiquitinated cargoes or those tagged with Lys(48)-linked chains.     

OTUB1 co-opts Lys48-linked ubiquitin recognition to suppress E2 enzyme function

1. Download : Download high-res image (250KB)
2. Download : Download full-size image

Highlights? Identification of OTUB1 mutants with impaired ability to inhibit E2 enzymes ? Crystal structure of a ubiquitin-charged E2 bound to OTUB1 ? Molecular basis of Lys48-linked ubiquitin chain recognition by OTUB1 determined ? OTUB1 employs product inhibition mimicry to inhibit E2 enzymes     

The met receptor degradation pathway: requirement for Lys48-linked polyubiquitin independent of proteasome activity

Acute stimulation of the receptor for the hepatocyte growth factor/scatter factor Met leads to receptor monoubiquitination and down-regulation through the lysosomal degradation pathway. We have determined that the Met receptor undergoes multiple monoubiquitination as opposed to the appendage of polyubiquitin chains. Nevertheless, overexpression of ubiquitin in HEK293T cells enhances the rate of Met receptor degradation, in contrast to a point mutant of ubiquitin (K48R) that cannot form Lys(48)-linked polyubiquitin chains. Furthermore, an enhancement of Met degradation is also seen under conditions where the proteasome is inhibited by lactacystin. We propose that this reflects polyubiquitin-dependent sorting of Met, as the overexpression of ubiquitin but not K48R ubiquitin also restores hepatocyte growth factor-dependent phosphorylation of the endosomal coat protein Hrs from inhibition by lactacystin. Our data indicate a requirement for K48R-linked polyubiquitin for Met endosomal trafficking independent of its canonical function of targeting for proteasomal degradation.     

p97/VCP- and Lys48-linked polyubiquitination form a new signaling pathway in DNA damage response

RNF8/RNF168-dependent Lys63-linked polyubiquitination at sites of DNA double-strand breaks (DSBs) was originally regarded as the sole ubiquitin-signaling pathway involved in the DNA damage response (DDR). However, ubiquitin-dependent p97/VCP segregase activity and RNF8-dependent Lys48-linked polyubiquitin chains at DSB sites have recently been identified as components of an additional and parallel ubiquitin-signaling DDR pathway. This newly identified pathway is essential to spatiotemporal protein turnover and regulates both main branches of DSB repair, homologous recombination and nonhomologous end joining. In this report, the function of the RNF8/Lys48 polyubiquitin chains/p97 pathway is discussed in the context of DSB repair and p97 chromatin-related functions.     

Structural and biochemical studies of retroviral proteases

Retroviral proteases form a unique subclass of the family of aspartic proteases. These homodimeric enzymes from a number of viral sources have by now been extensively characterized, both structurally and biochemically. The importance of such knowledge to the development of new drugs against AIDS has been, to a large extent, the driving force behind this progress. High-resolution structures are now available for enzymes from human immunodeficiency virus types 1 and 2, simian immunodeficiency virus, feline immunodeficiency virus, Rous sarcoma virus, and equine infectious anemia virus. In this review, structural and biochemical data for retroviral proteases are compared in order to analyze the similarities and differences between the enzymes from different sources and to enhance our understanding of their properties.     

Tsg101/ESCRT-I recruitment regulated by the dual binding modes of K63-linked diubiquitin

1. Download : Download high-res image (162KB)
2. Download : Download full-size image

     

Atypical ubiquitylation - the unexplored world of polyubiquitin beyond Lys48 and Lys63 linkages

Ubiquitylation is one of the most abundant and versatile post-translational modifications (PTMs) in cells. Its versatility arises from the ability of ubiquitin to form eight structurally and functionally distinct polymers, in which ubiquitin moieties are linked via one of seven Lys residues or the amino terminus. Whereas the roles of Lys48- and Lys63-linked polyubiquitin in protein degradation and cellular signalling are well characterized, the functions of the remaining six 'atypical' ubiquitin chain types (linked via Lys6, Lys11, Lys27, Lys29, Lys33 and Met1) are less well defined. Recent developments provide insights into the mechanisms of ubiquitin chain assembly, recognition and hydrolysis and allow detailed analysis of the functions of atypical ubiquitin chains. The importance of Lys11 linkages and Met1 linkages in cell cycle regulation and nuclear factor-κB activation, respectively, highlight that the different ubiquitin chain types should be considered as functionally independent PTMs.     

Structural and biochemical studies of RIG-I antiviral signaling

Retinoic acid-inducible gene I (RIG-I) is an important pattern recognition receptor that detects viral RNA and triggers the production of type-I interferons through the downstream adaptor MAVS (also called IPS-1, CARDIF, or VISA). A series of structural studies have elaborated some of the mechanisms of dsRNA recognition and activation of RIG-I. Recent studies have proposed that K63-linked ubiquitination of, or unanchored K63-linked polyubiquitin binding to RIG-I positively regulates MAVS-mediated antiviral signaling. Conversely phosphorylation of RIG-I appears to play an inhibitory role in controlling RIG-I antiviral signal transduction. Here we performed a combined structural and biochemical study to further define the regulatory features of RIG-I signaling. ATP and dsRNA binding triggered dimerization of RIG-I with conformational rearrangements of the tandem CARD domains. Full length RIG-I appeared to form a complex with dsRNA in a 2:2 molar ratio. Compared with the previously reported crystal structures of RIG-I in inactive state, our electron microscopic structure of full length RIG-I in complex with blunt-ended dsRNA, for the first time, revealed an exposed active conformation of the CARD domains. Moreover, we found that purified recombinant RIG-I proteins could bind to the CARD domain of MAVS independently of dsRNA, while S8E and T170E phosphorylation-mimicking mutants of RIG-I were defective in binding E3 ligase TRIM25, unanchored K63-linked polyubiquitin, and MAVS regardless of dsRNA. These findings suggested that phosphorylation of RIG inhibited downstream signaling by impairing RIG-I binding with polyubiquitin and its interaction with MAVS.     

Differential regulation of RNF8-mediated Lys48- and Lys63-based poly-ubiquitylation

Pairing of a given E3 ubiquitin ligase with different E2s allows synthesis of ubiquitin conjugates of different topologies. While this phenomenon contributes to functional diversity, it remains largely unknown how a single E3 ubiquitin ligase recognizes multiple E2s, and whether identical structural requirements determine their respective interactions. The E3 ubiquitin ligase RNF8 that plays a critically important role in transducing DNA damage signals, interacts with E2s UBCH8 and UBC13, and catalyzes both K48- and K63-linked ubiquitin chains. Interestingly, we report here that a single-point mutation (I405A) on the RNF8 polypeptide uncouples its ability in catalyzing K48- and K63-linked ubiquitin chain formation. Accordingly, while RNF8 interacted with E2s UBCH8 and UBC13, its I405A mutation selectively disrupted its functional interaction with UBCH8, and impaired K48-based poly-ubiquitylation reactions. In contrast, RNF8 I405A preserved its interaction with UBC13, synthesized K63-linked ubiquitin chains, and assembled BRCA1 and 53BP1 at sites of DNA breaks. Together, our data suggest that RNF8 regulates K48- and K63-linked poly-ubiquitylation via differential RING-dependent interactions with its E2s UBCH8 and UBC13, respectively.     

Structural and biochemical studies of the substrate selectivity of carnitine acetyltransferase

Carnitine acyltransferases catalyze the exchange of acyl groups between coenzyme A (CoA) and carnitine. They have important roles in many cellular processes, especially the oxidation of long-chain fatty acids, and are attractive targets for drug discovery against diabetes and obesity. These enzymes are classified based on their substrate selectivity for short-chain, medium-chain, or long-chain fatty acids. Structural information on carnitine acetyltransferase suggests that residues Met-564 and Phe-565 may be important determinants of substrate selectivity with the side chain of Met-564 located in the putative binding pocket for acyl groups. Both residues are replaced by glycine in carnitine palmitoyltransferases. To assess the functional relevance of this structural observation, we have replaced these two residues with small amino acids by mutagenesis, characterized the substrate preference of the mutants, and determined the crystal structures of two of these mutants. Kinetic studies confirm that the M564G or M564A mutation is sufficient to increase the activity of the enzyme toward medium-chain substrates with hexanoyl-CoA being the preferred substrate for the M564G mutant. The crystal structures of the M564G mutant, both alone and in complex with carnitine, reveal a deep binding pocket that can accommodate the larger acyl group. We have determined the crystal structure of the F565A mutant in a ternary complex with both the carnitine and CoA substrates at a 1.8-A resolution. The F565A mutation has minor effects on the structure or the substrate preference of the enzyme.     

Various strategies of using residual dipolar couplings in NMR-driven protein docking: application to Lys48-linked di-ubiquitin and validation against 15N-relaxation data

When classical, Nuclear Overhauser Effect (NOE)-based approaches fail, it is possible, given high-resolution structures of the free molecules, to model the structure of a complex in solution based solely on chemical shift perturbation (CSP) data in combination with orientational restraints from residual dipolar couplings (RDCs) when available. RDCs can be incorporated into the docking following various strategies: as direct restraints and/or as intermolecular intervector projection angle restraints (Meiler et al., J Biomol NMR 2000;16:245-252). The advantage of the latter for docking is that they directly define the relative orientation of the molecules. A combined protocol in which RDCs are first introduced as intervector projection angle restraints and at a later stage as direct restraints is shown here to give the best performance. This approach, implemented in our information-driven docking approach HADDOCK (Dominguez et al., J Am Chem Soc 2003;125:1731-1737), is used to determine the solution structure of the Lys48-linked di-ubiquitin, for which chemical shift mapping, RDCs, and (15)N-relaxation data have been previously obtained (Varadan et al., J Mol Biol 2002;324:637-647). The resulting structures, derived from CSP and RDC data, are cross-validated using (15)N-relaxation data. The solution structure differs from the crystal structure by a 20 degrees rotation of the two ubiquitin units relative to each other.