Factors contributing to heat resistance of Clostridium perfringens endospores

The endospores formed by strains of type A Clostridium perfringens that produce the C. perfringens enterotoxin (CPE) are known to be more resistant to heat and cold than strains that do not produce this toxin. The high heat resistance of these spores allows them to survive the cooking process, leading to a large number of food-poisoning cases each year. The relative importance of factors contributing to the establishment of heat resistance in this species is currently unknown. The present study examines the spores formed by both CPE(+) and CPE(-) strains for factors known to affect heat resistance in other species. We have found that the concentrations of DPA and metal ions, the size of the spore core, and the protoplast-to-sporoplast ratio are determining factors affecting heat resistance in these strains. While the overall thickness of the spore peptidoglycan was found to be consistent in all strains, the relative amounts of cortex and germ cell wall peptidoglycan also appear to play a role in the heat resistance of these strains.     

DEVELOPMENT OF ENDOPHYTIC FRANKIA SPORANGIA IN FIELD- AND LABORATORY-GROWN NODULES OF COMPTONIA PEREGRINA AND MYRICA GALE

Field-collected nodules of Comptonia peregrina (L.) Coult. and Myrica gale L. (Myricaceae), infected by the nitrogen-fixing actinomycete Frankia sp., were of two types: those that lacked sporangia entirely, designated spore(-), and those that showed extensive sporangial development, designated spore(+). In spore(+) nodules of C. peregrina, sporangia began to develop after the differentiation of endophytic vesicles and the concomitant onset of nitrogenase activity. At the onset of sporangial differentiation, infected host cells appeared healthy. However, endophytic vesicles and host cell cytoplasm and nuclei began to senesce rapidly as sporangia developed. Staining of sectioned material with the fluorescent stain Calcofluor White suggested that vesicles, hyphae and young sporangia were enclosed within a host-derived encapsulation layer, but mature sporangia were no longer encapsulated. In both C. peregrina and M. gale, vesicles were more short-lived in spore(+) than in spore(-) nodules. Field-collected spore(+) M. gale nodules exhibited a pronounced seasonality of sporangial formation. Sporangia began to differentiate in June, after the formation of vesicles and became more prominent in late summer. Inter- and intraspecific cross-inoculations suggest that the ability to form sporangia in the symbiotic state is controlled by endophytic strain type rather than host genotype or host/endophyte combination. The host may, however, influence the number and seasonal appearance of sporangia formed.     

Enterotoxin formation by Clostridium perfringens type A studied by the use of fluorescent antibody.

Fluorescein isothiocyanate-conjugated antibody to purified enterotoxin of Clostridium perfringens was used to study the intracellular formation of enterotoxin by this organism. Enterotoxin was detected at 4 h of growth at the end of the cell containing forespore. With the development of the spore, enterotoxin accumulation continued and involved the entire length of the cell until its lysis with the release of enterotoxin and mature spore. The spores did not contain demonstrable enterotoxin. Only a certain number of the sporulated cells of the enterotoxigenic strains studied produced this toxin. The amount of enterotoxin produced varied with sporulation percentage, and between strains and individual cells.     

Two different parasporal inclusions are produced by Bacillus thuringiensis subsp. finitimus.

Bacillus thuringiensis subsp. finitimus produced at least two parasporal inclusions. One inclusion was formed within the exosporium and remained with the spore after mother cell lysis. A second inclusion formed somewhat later exterior to the exosporium. Each inclusion contained a major polypeptide of about 135,000 daltons with unique antigenic determinants. This subspecies contained only two plasmids, of 98 and 77 megadaltons (MDa). Strains cured of these plasmids produced only the free inclusion. Since the plasmid-cured strains did not contain DNA sequences homologous to plasmid DNA, the gene for the free-inclusion protein must be encoded in the chromosome. In contrast, the enclosed parasporal inclusion was produced only when the plasmid of 98 MDa was present. In addition, transfer of the 98-MDa plasmid to Bacillus cereus resulted in transcipients that produced small inclusions enclosed within the exosporium, and the protein extracted from these inclusions reacted with antibody specific for enclosed inclusion protein of B. thuringiensis subsp. finitimus. Genes in both the chromosome and a plasmid function in the synthesis of distinct parasporal proteins in this subspecies.     

Crystal protein formed by Bacillus subtilis cells.

Electron microscopic investigation of ultrathin sections of Bacillus subtilis Cgr4 cells revealed the presence of crystal-like inclusions which were formed of spheric homogeneous subunits. The frequency of cells with a crystal-like inclusion in the culture approached 1%. The appearance of the crystal protein in cells coincided in time with spore morphogenesis. However, the process of crystal protein formation and sporulation are two alternatives: the cells either form the crystal protein or continue spore morphogenesis. Fractionation of cells in the stationary growth phase on a Percoll density gradient showed that the cells containing the crystal protein accumulated in the fraction corresponding to a 1.14-g/ml Percoll density. The cells were disintegrated by sonication, and alkaline-extracted proteins were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. After sodium dodecyl sulfate-gel electrophoresis, the fraction enriched with crystal-containing cells showed practically a single band with a molecular weight of 47,000 that corresponded to the crystal-forming protein. The antigenic features and amino acid composition indicated certain similarities between the crystal-forming protein in B. subtilis Cgr4 cells and the spore coat protein.     

Spore Germination Patterns in the Ferns, Cyathea and Dicksonia

Cell division patterns during germination of spores of Cyatheaaustralis, C. cooperi and Dicksonia antarctica were examinedby light microscopy of sectioned materials and by the scanningelectron microscope. In C. australis and C. cooperi the rhizoidwas traced to a small cell formed by an asymmetric divisionof the spore by a wall parallel to its equatorial plane. Incontrast, the rhizoid was formed by a division of the sporeparallel to its polar axis in D. antarctica. In spores of bothgenera, a second division wall oriented in a plane perpendicularto the first gave rise to the protonemal cell. Certain aspectsof germination described here in spores of Cyathea and Dicksoniaare in conflict with the published accounts of spore germinationin these genera. Cyathea, Dicksonia, spore germination, cell division pattern     

In vivo crystal formation in Escherichia coli of an over-expressed soluble form of penicillin-binding protein 5

Accumulation of either native membrane-bound or soluble variants of PBP5 over-expressed in the cytoplasm was investigated by electron microscopy of ultra-thin sections. One of the soluble forms of PBP5 (PBP5s353) formed well-ordered crystals inside the cells. Cells sectioned perpendicular to their long axis showed a diamond-shaped crystal whereas cells cut parallel to their long axis contained a long, narrow crystal. In both sectioning directions an ordered ultrastructure was visible as shown by optical diffraction. Computer processing was used to enhance the crystal images. From this the unit cell parameters were calculated as a = 7.6 nm, b = 4 nm, c = 4.2 nm, gamma = 75 degrees. The calculated unit-cell volume of 120 nm3 is large enough to contain one protein molecule.     

Reovirus Replication Protein μ2 Influences Cell Tropism by Promoting Particle Assembly within Viral Inclusions

The double-stranded RNA virus mammalian reovirus displays broad cell, tissue, and host tropism. A critical checkpoint in the reovirus replication cycle resides within viral cytoplasmic inclusions, which are biosynthetic centers of genome multiplication and new-particle assembly. Replication of strain type 3 Dearing (T3) is arrested in Madin-Darby canine kidney (MDCK) cells at a step subsequent to inclusion development and prior to formation of genomic double-stranded RNA. This phenotype is primarily regulated by viral replication protein μ2. To understand how reovirus inclusions differ in productively and abortively infected MDCK cells, we used confocal immunofluorescence and thin-section transmission electron microscopy (TEM) to probe inclusion organization and particle morphogenesis. Although no abnormalities in inclusion morphology or viral protein localization were observed in T3-infected MDCK cells using confocal microscopy, TEM revealed markedly diminished production of mature progeny virions. T3 inclusions were less frequent and smaller than those formed by T3-T1M1, a productively replicating reovirus strain, and contained decreased numbers of complete particles. T3 replication was enhanced when cells were cultivated at 31°C, and inclusion ultrastructure at low-temperature infection more closely resembled that of a productive infection. These results indicate that particle assembly in T3-infected MDCK cells is defective, possibly due to a temperature-sensitive structural or functional property of μ2. Thus, reovirus cell tropism can be governed by interactions between viral replication proteins and the unique cell environment that modulate efficiency of particle assembly.     

A redescription of Nosema herpobdellae (Microspora: Nosematidae), a parasite of the leech Erpobdella octoculata (Hirudinea: Erpobdellidae)

Nosema herpobdellae was recorded in populations of the leech Erpobdella octoculata from lakes in northwest England and North Wales and is redescribed using light and transmission electron microscopy. It differes from N. glossiphoniae in the nature of the infection and tissues parasitized and from N. tractabile in its larger spore size, longer polar filament, in the angle of the anterior coils of the polar filament to the spore long axis, and apparently in its developmental cycle. The infection was found in a massive xenoma, in the connective tissue surrounding the gut, which was presumed to be formed from a single hypertrophied cell. Its developmental cycle included merogony and sporogony.     

A new growth and in vitro sporulation medium for Clostridium perfringens

Growth and in vitro sporulation capabilities of three related Clostridium perfringens strains (NCTC 8798, 8-6 and R3) were followed in a new sporulation medium (NSM), with notable changes from a maintenance medium originally designed for strictly anaerobic bacteria. Compared with thioglycollate (FTG) medium, the new sporulation medium promoted growth of Cl. perfringens with a shorter lag phase and a 20% higher biomass production. The age of inoculum did not change Cl. perfringens growth kinetics. When compared with reference conditions, in vitro spore production kinetics were different in the new sporulation medium, but both conditions led routinely to 100% sporulation and spore counts of approximately 10(8) ml-1. The ease of preparation of the NSM, and the use of the same culture medium for good growth, high sporulation yields and spore production, represent an attractive alternative to the complex media routinely used for in vitro studies of Cl. perfringens physiology.     

Morphogenesis of bacillus spore surfaces

Spores produced by bacilli are encased in a proteinaceous multilayered coat and, in some species (including Bacillus anthracis), further surrounded by a glycoprotein-containing exosporium. To characterize bacillus spore surface morphology and to identify proteins that direct formation of coat surface features, we used atomic-force microscopy (AFM) to image the surfaces of wild-type and mutant spores of Bacillus subtilis, as well as the spore surfaces of Bacillus cereus 569 and the Sterne strain of Bacillus anthracis. This analysis revealed that the coat surfaces in these strains are populated by a series of bumps ranging between 7 and 40 nm in diameter, depending on the species. Furthermore, a series of ridges encircled the spore, most of which were oriented along the long axis of the spore. The structures of these ridges differ sufficiently between species to permit species-specific identification. We propose that ridges are formed early in spore formation, when the spore volume likely decreases, and that when the spore swells during germination the ridges unfold. AFM analysis of a set of B. subtilis coat protein gene mutants revealed three coat proteins with roles in coat surface morphology: CotA, CotB, and CotE. Our data indicate novel roles for CotA and CotB in ridge pattern formation. Taken together, these results are consistent with the view that the coat is not inert. Rather, the coat is a dynamic structure that accommodates changes in spore volume.     

Structure of the sulfur inclusion envelopes from four beggiatoas

The sulfur inclusions from four strain ofBeggiatoa alba were observed by using a ruthenium red-glutaraldehyde technique and a modified Ryter-Kellenberger technique. Three of the four strains contained 4-to 5-nm-thick, single, electron-dense, layered sulfur inclusion envelopes. The fourth strain (B15LD) contained a complex pentalaminar sulfur inclusion envelope, 12–14 nm thick. The sulfur inclusions from all four strains were external to the cytoplasmic membrane but internal to the complexBeggiatoa cell walls. Freeze-etching of theB. alba strain B18LD trichomes revealed the unusual cross-fracture morphology of the sulfur in the inclusions. Fractures around the sulfur inclusions revealed a surface similar to that of the fractured cytoplasmic membrane.     

Purification and characterization of intracellular proteases of Clostridium perfringens type A

Five intracellular proteases from sporulating cells of Clostridium perfringens type A were identified and three could be separated by DEAE-Sephacel. Two, I-A and I-B, had caseinolytic activity and one, I-C, was only active on N-benzoyl-DL-arginine-p-nitroanilide. I-A and I-B could each be further separated by Sephacryl S-300 into I-A-1 and I-A-2 and I-B-1 and I-B-2, respectively. I-A-1, a chymotrypsin-like enzyme, was the major intracellular protease, constituting 74% of the intracellular caseinolytic activity. In addition to cytoplasmic proteases both trypsin and chymotrypsin-like enzyme activity was associated with the membrane fraction. I-A-1 had a molecular weight of 330,000, with subunits of 120,000 and 138,000. I-A-1 cleaved a 1200 molecular weight peptide from C. perfringens enterotoxin. Early sporulating cell extracts of C. perfringens contained three presumptive enterotoxin precursors, which disappeared following treatment with I-A. Such cells also contained at least 10 spore coat related proteins, only one (51,500 molecular weight) of which was sensitive to I-A-1. The results indicate a possible role for the major intracellular protease in the processing of C. perfringens enterotoxin and a less important role, if any, in spore coat formation.     

Comparison of Subacute Sclerosing Panencephalitis and Measles Viruses: an Electron Microscope Study

The ultrastructure of CV-1 cells infected with subacute sclerosing panencephalitis (SSPE) viruses was compared with that of CV-1 cells infected with the wild or Edmonston strain of measles virus. Both SSPE viruses and the measles viruses produced two types of nucleocapsid structures: smooth filaments, 15 to 17 nm in diameter, and granular filaments, 22 to 25 nm. The smooth and granular filaments produced by SSPE and measles virus did not differ in appearance. In CV-1 cells infected with SSPE viruses, smooth filaments formed large intranuclear inclusions and granular filaments occupied a large area of the cytoplasm, but always spared the area under the cell membrane. Particles budding from the surface of these cells contained no nucleocapsids. In CV-1 cells infected with measles virus, only small aggregates of smooth filaments were seen in the nuclei. Granular filaments in the cytoplasm predominantly occupied the area under the cell membrane, and were aligned beneath the cell membrane in a parallel fashion and assembled into budding particles. These differences between SSPE and measles virus may be regarded as quantitative, but they do distinguish SSPE viruses from measles virus. Moreover, the formation of large nuclear inclusions filled with smooth filaments appears to be a characteristic process of SSPE, but not of measles, since this type of inclusion is invariably seen in SSPE brain tissues, brain cultures derived from them, and CV-1 cells infected with SSPE viruses.     

Isolation of inclusion bodies from vegetative Clostridium perfringens: partial purification of a 47 kDa inclusion protein.

A refractile inclusion body produced by vegetative cells of Clostridium perfringens at temperatures above 40 degrees C was isolated and partially characterized. The inclusion was composed of protein and could be solubilized by sodium dodecyl sulphate plus either dithiothreitol or beta-mercaptoethanol. The solubilized inclusion showed no antigenic relationship with Cl. perfringens enterotoxin. One major band with an apparent MW of 47 kDa was demonstrated after polyacrylamide gel electrophoresis of the solubilized inclusion. Both enterotoxin-positive and enterotoxin-negative strains produced the inclusion body. No effect on the morphology of several eucaryotic cell lines was observed when solubilized or intact inclusion was added to the cell cultures.     

Tubule bundle-inclusions in vacuoles of Tamarix aphylla L. mesophyll cells

Summary Vacuoles of differentiating mesophyll cells of Tamarix aphylla contain an amorphous electron-dense material in which stacks of parallel aligned striations are embedded. Cross-sections of the striations disclosed that they represent profiles of longitudinally sectioned bundles of tubules (tubule outer diameter 9.0 nm, tubule wall thickness 1.8 nm). In advanced mesophyll cell development, the amorphous vacuolar material disappears, whereas the bundles of tubules turn into bundles of double helices (double helix diameter 14.5 nm). Cytochemical treatment of mesophyll cells with the enzymes pepsin and trypsin has revealed that both the bundles of tubules/double helices and the embedding material are constituted of protein. The possible functional role of the vacuolar inclusions is discussed.     

Chemical and Morphological Studies of Bacterial Spore Formation : II. Spore and Parasporal Protein Formation in Bacillus cereus var. Alesti

The development of both the spore and parasporal protein crystal of Bacillus cereus var. alesti was followed using chemical and cytological techniques. The changes which led to the formation of the fore-spore were similar to those already described for Bacillus cereus. However, adjacent to the developing fore-spore a small inclusion became discernible in phase contrast. This protein inclusion during its growth was differentiated from the chromatin and lipid-containing inclusions by sequential staining techniques. During spore and crystal formation no net synthesis of either nucleic acid was detected. Tracer studies with radioactive phosphorus confirmed that the spore chromatin was derived from that in the vegetative cell. These same studies also indicated that a turnover of ribonucleic acid occurred during the sporulation process. During their formation both the spore and crystal incorporated methionine-³⁵S from the medium and from cellular material into a bound form. Sequential extractions with alkali and with alkaline-thioglycollate reagent revealed that the solubility characteristics of the mature crystal were possibly related to the presence of intermolecular disulphide bonds which developed after the major synthesis of the crystal was complete. The synthetic nature of sporogenesis and crystal formation is discussed with reference to the concept of "endotrophic" sporulation.     

Isolation of inclusion bodies from vegetative Clostridium perfringens: partial purification of a 47 kDa inclusion protein

J.S. GARCIA-ALVARADO, R.G. LABBÉ AND M.A. RODRIGUEZ. 1992. A refractile inclusion body produced by vegetative cells of Clostridium perfringens at temperatures above 40C was isolated and partially characterized. The inclusion was composed of protein and could be solubilized by sodium dodecyl sulphate plus either dithiothreitol or β-mercaptoethanol. The solubilized inclusion showed no antigenic relationship with Cl. perfringens enterotoxin. One major band with an apparent MW of 47 kDa was demonstrated after polyacrylamide gel electrophoresis of the solubilized inclusion. Both enterotoxin-positive and enterotoxin-negative strains produced the inclusion body. No effect on the morphology of several eucaryotic cell lines was observed when solubilized or intact inclusion was added to the cell cultures.     

A novel small acid soluble protein variant is important for spore resistance of most Clostridium perfringens food poisoning isolates

Clostridium perfringens is a major cause of food poisoning (FP) in developed countries. C. perfringens isolates usually induce the gastrointestinal symptoms of this FP by producing an enterotoxin that is encoded by a chromosomal (cpe) gene. Those typical FP strains also produce spores that are extremely resistant to food preservation approaches such as heating and chemical preservatives. This resistance favors their survival and subsequent germination in improperly cooked, prepared, or stored foods. The current study identified a novel alpha/beta-type small acid soluble protein, now named Ssp4, and showed that sporulating cultures of FP isolates producing resistant spores consistently express a variant Ssp4 with an Asp substitution at residue 36. In contrast, Gly was detected at Ssp4 residue 36 in C. perfringens strains producing sensitive spores. Studies with isogenic mutants and complementing strains demonstrated the importance of the Asp 36 Ssp4 variant for the exceptional heat and sodium nitrite resistance of spores made by most FP strains carrying a chromosomal cpe gene. Electrophoretic mobility shift assays and DNA binding studies showed that Ssp4 variants with an Asp at residue 36 bind more efficiently and tightly to DNA than do Ssp4 variants with Gly at residue 36. Besides suggesting one possible mechanistic explanation for the highly resistant spore phenotype of most FP strains carrying a chromosomal cpe gene, these findings may facilitate eventual development of targeted strategies to increase killing of the resistant spores in foods. They also provide the first indication that SASP variants can be important contributors to intra-species (and perhaps inter-species) variations in bacterial spore resistance phenotypes. Finally, Ssp4 may contribute to spore resistance properties throughout the genus Clostridium since ssp4 genes also exist in the genomes of other clostridial species.