共查询到20条相似文献,搜索用时 31 毫秒
1.
The mechanical properties of mixed culture biofilms were determined by creep analysis using an AR1000 rotating disk rheometer. The biofilms were grown directly on the rheometer disks which were rotated in a chemostat for 12 d. The resulting biofilms were heterogeneous and ranged from 35?μm to 50?μm in thickness. The creep curves were all viscoelastic in nature. The close agreement between stress and strain ratio of a sample tested at 0.1 and 0.5 Pa suggested that the biofilms were tested in the linear viscoelastic range and supported the use of linear viscoelastic theory in the development of a constitutive law. The experimental data was fit to a 4-element Burger spring and dashpot model. The shear modulus (G) ranged from 0.2 to 24 Pa and the viscous coefficient (η) from 10 to 3000 Pa. These values were in the same range as those previously estimated from fluid shear deformation of biofilms in flow cells. A viscoelastic biofilm model will help to predict shear related biofilm phenomena such as elevated pressure drop, detachment, and the flow of biofilms over solid surfaces. 相似文献
2.
In this study, the mechanical properties of biofilms formed at the surface of nano-filtration (NF) membranes from a drinking water plant were analysed. Confocal laser scanning microscopy observations revealed that the NF biofilms formed a dense and heterogeneous structure at the membrane surface, with a mean thickness of 32.5 +/- 17.7 mum. The biofilms were scraped from the membrane surface and analysed in rotation and oscillation experiments with a RheoStress 150 rotating disk rheometer. During rotation analyses, a viscosity decrease with speed of shearing characteristic of rheofluidification was observed (eta = 300 Pa s for y = 0.3 s(-1)). In the oscillation analyses with a sweeping of frequency (1-100 Hz), elasticity (G') ranged from 3000 to 3500 Pa and viscosity (G') from 800 to 1200 Pa. Creep curves obtained with an application of a shear stress of 30 Pa were viscoelastic in nature. The G(0) and eta values were, respectively, 1.4 +/- 0.3 x 10(3) Pa and 3.3 +/- 0.65 x 10(6) Pa s. The relationship between the characteristics of NF biofilms and the flow conditions encountered during NF is discussed. 相似文献
3.
Mengfei Li Yanina Nahum Karel Matouš Paul Stoodley Robert Nerenberg 《Biotechnology and bioengineering》2023,120(2):553-561
Rheometry is an experimental technique widely used to determine the mechanical properties of biofilms. However, it characterizes the bulk mechanical behavior of the whole biofilm. The effects of biofilm mechanical heterogeneity on rheometry measurements are not known. We used laboratory experiments and computer modeling to explore the effects of biofilm mechanical heterogeneity on the results obtained by rheometry. A synthetic biofilm with layered mechanical properties was studied, and a viscoelastic biofilm theory was employed using the Kelvin–Voigt model. Agar gels with different concentrations were used to prepare the layered, heterogeneous biofilm, which was characterized for mechanical properties in shear mode with a rheometer. Both experiments and simulations indicated that the biofilm properties from rheometry were strongly biased by the weakest portion of the biofilm. The simulation results using linearly stratified mechanical properties from a previous study also showed that the weaker portions of the biofilm dominated the mechanical properties in creep tests. We note that the model can be used as a predictive tool to explore the mechanical behavior of complex biofilm structures beyond those accessible to experiments. Since most biofilms display some degree of mechanical heterogeneity, our results suggest caution should be used in the interpretation of rheometry data. It does not necessarily provide the “average” mechanical properties of the entire biofilm if the mechanical properties are stratified. 相似文献
4.
Biofilms commonly develop in flowing aqueous environments, where the flow causes the biofilm to deform. Because biofilm deformation affects the flow regime, and because biofilms behave as complex heterogeneous viscoelastic materials, few models are able to predict biofilm deformation. In this study, a phase-field (PF) continuum model coupled with the Oldroyd-B constitutive equation was developed and used to simulate biofilm deformation. The accuracy of the model was evaluated using two types of biofilms: a synthetic biofilm, made from alginate mixed with bacterial cells, and a Pseudomonas aeruginosa biofilm. Shear rheometry was used to experimentally determine the mechanical parameters for each biofilm, used as inputs for the model. Biofilm deformation under fluid flow was monitored experimentally using optical coherence tomography. The comparison between the experimental and modeling geometries, for selected horizontal cross sections, after fluid-driven deformation was good. The relative errors ranged from 3.2 to 21.1% for the synthetic biofilm and from 9.1 to 11.1% for the P. aeruginosa biofilm. This is the first demonstration of the effectiveness of a viscoelastic PF biofilm model. This model provides an important tool for predicting biofilm viscoelastic deformation. It also can benefit the design and control of biofilms in engineering systems. 相似文献
5.
Peter C.Y. Lau John R. Dutcher Terry J. Beveridge Joseph S. Lam 《Biophysical journal》2009,96(7):2935-2948
Bacterial biofilms are the most prevalent mode of bacterial growth in nature. Adhesive and viscoelastic properties of bacteria play important roles at different stages of biofilm development. Following irreversible attachment of bacterial cells onto a surface, a biofilm can grow in which its matrix viscoelasticity helps to maintain structural integrity, determine stress resistance, and control ease of dispersion. In this study, a novel application of force spectroscopy was developed to characterize the surface adhesion and viscoelasticity of bacterial cells in biofilms. By performing microbead force spectroscopy with a closed-loop atomic force microscope, we accurately quantified these properties over a defined contact area. Using the model gram-negative bacterium Pseudomonas aeruginosa, we observed that the adhesive and viscoelastic properties of an isogenic lipopolysaccharide mutant wapR biofilm were significantly different from those measured for the wild-type strain PAO1 biofilm. Moreover, biofilm maturation in either strain also led to prominent changes in adhesion and viscoelasticity. To minimize variability in force measurements resulting from experimental parameter changes, we developed standardized conditions for microbead force spectroscopy to enable meaningful comparison of data obtained in different experiments. Force plots measured under standard conditions showed that the adhesive pressures of PAO1 and wapR early biofilms were 34 ± 15 Pa and 332 ± 47 Pa, respectively, whereas those of PAO1 and wapR mature biofilms were 19 ± 7 Pa and 80 ± 22 Pa, respectively. Fitting of creep data to a Voigt Standard Linear Solid viscoelasticity model revealed that the instantaneous and delayed elastic moduli in P. aeruginosa were drastically reduced by lipopolysaccharide deficiency and biofilm maturation, whereas viscosity was decreased only for biofilm maturation. In conclusion, we have introduced a direct biophysical method for simultaneously quantifying adhesion and viscoelasticity in bacterial biofilms under native conditions. This method could prove valuable for elucidating the contribution of genetic backgrounds, growth conditions, and environmental stresses to microbial community physiology. 相似文献
6.
Structural deformation of bacterial biofilms caused by short-term fluctuations in fluid shear: an in situ investigation of biofilm rheology. 总被引:10,自引:0,他引:10
P Stoodley Z Lewandowski J D Boyle H M Lappin-Scott 《Biotechnology and bioengineering》1999,65(1):83-92
The physical properties (rheology) of biofilms will determine the shape and mechanical stability of the biofilm structure and consequently affect both mass transfer and detachment processes. Biofilm viscoelasticity is also thought to increase fluid energy losses in pipelines. Yet there is very little information on the rheology of intact biofilms. This is due in part to the difficulty in using conventional testing techniques. The size and nature of biofilms makes them difficult to handle, while removal from a surface destroys the integrity of the sample. We have developed a method which allowed us to conduct simple stress-strain and creep experiments on mixed and pure culture biofilms in situ by observing the structural deformations caused by changes in hydrodynamic shear stress (tau(w)). The biofilms were grown under turbulent pipe flow (flow velocity (u) = 1 m/s, Reynolds number (Re) = 3600, tau(w) = 5. 09 N/m(2)) for between 12 and 23 days. The resulting biofilms were heterogeneous and consisted of filamentous streamers that were readily deformed by changes in tau(w). At tau(w) of 10.11 N/m(2) the streamers were flattened so that the thickness was reduced by 25%. We estimated that the shear modulus (G) of the mixed culture biofilm was 27 N/m(2) and the apparent elastic modulus (E(app)) of both biofilms was in the range of 17 to 40 N/m(2). The biofilms behaved like elastic and viscoelastic solids below the tau(w) at which they were grown but behaved like viscoelastic fluids at elevated tau(w). The implications of these results for fluid energy losses and the processes of mass transfer and detachment are discussed. 相似文献
7.
Changes in the viscoelastic material properties of bacterial biofilms resulting from chemical and antimicrobial treatments were measured by rheometry. Colony biofilms of Staphylococcus epidermidis or a mucoid Pseudomonas aeruginosa were subjected to a classical creep test performed using a parallel plate rheometer. Data were fit to the 4-parameter Burger model to quantify the material properties. Biofilms were exposed to the chloride salts of several common mono-, di-, and tri- valent cations, and to urea, industrial biocides, and antibiotics. Many of these treatments resulted in statistically significant alterations in the material properties of the biofilm. Multivalent cations stiffened the P. aeruginosa biofilm, while ciprofloxacin and glutaraldehyde weakened it. Urea, rifampin, and a quaternary ammonium biocide weakened the S. epidermidis biofilm. In general, there was no correspondence between the responses of the two different types of biofilms to a particular treatment. These results underscore the distinction between the killing power of an antimicrobial agent and its ability to alter biofilm mechanical properties and thereby influence biofilm removal. Understanding biofilm rheology and how it is affected by chemical treatment could lead to improvements in biofilm control. 相似文献
8.
In this study, the mechanical properties of biofilms formed at the surface of nano-filtration (NF) membranes from a drinking water plant were analysed. Confocal laser scanning microscopy observations revealed that the NF biofilms formed a dense and heterogeneous structure at the membrane surface, with a mean thickness of 32.5 ± 17.7 μm. The biofilms were scraped from the membrane surface and analysed in rotation and oscillation experiments with a RheoStress 150 rotating disk rheometer. During rotation analyses, a viscosity decrease with speed of shearing characteristic of rheofluidification was observed (η = 300 Pa s for ý = 0.3 s?1). In the oscillation analyses with a sweeping of frequency (1–100 Hz), elasticity (G′) ranged from 3000 to 3500 Pa and viscosity (G″) from 800 to 1200 Pa. Creep curves obtained with an application of a shear stress of 30 Pa were viscoelastic in nature. The G 0 and η values were, respectively, 1.4 ± 0.3 × 103 Pa and 3.3 ± 0.65 × 106 Pa s. The relationship between the characteristics of NF biofilms and the flow conditions encountered during NF is discussed. 相似文献
9.
John A. Finlay Michael P. Schultz Gemma Cone Maureen E. Callow James A. Callow 《Biofouling》2013,29(4):401-411
Laboratory assessment of the adhesion of diatoms to non-toxic fouling-release coatings has tended to focus on single cells rather than the more complex state of a biofilm. A novel culture system based on open channel flow with adjustable bed shear stress values (0–2.4?Pa) has been used to produce biofilms of Navicula incerta. Biofilm development on glass and polydimethylsiloxane elastomer (PDMSe) showed a biphasic relationship with bed shear stress, which was characterised by regions of biofilm stability and instability reflecting cohesion between cells relative to the adhesion to the substratum. On glass, a critical shear stress of 1.3–1.4?Pa prevented biofilm development, whereas on PDMS, biofilms continued to grow at 2.4?Pa. Studies of diatom biofilms cultured on zwitterionic coatings using a bed shear stress of 0.54?Pa showed lower biomass production and adhesion strength on poly(sulfobetaine methacrylate) compared to poly(carboxybetaine methacrylate). The dynamic biofilm approach provides additional information to supplement short duration laboratory evaluations. 相似文献
10.
Warren L. Jones Michael P. Sutton Ladean McKittrick Philip S. Stewart 《Biofouling》2013,29(2):207-215
Changes in the viscoelastic material properties of bacterial biofilms resulting from chemical and antimicrobial treatments were measured by rheometry. Colony biofilms of Staphylococcus epidermidis or a mucoid Pseudomonas aeruginosa were subjected to a classical creep test performed using a parallel plate rheometer. Data were fit to the 4-parameter Burger model to quantify the material properties. Biofilms were exposed to the chloride salts of several common mono-, di-, and tri- valent cations, and to urea, industrial biocides, and antibiotics. Many of these treatments resulted in statistically significant alterations in the material properties of the biofilm. Multivalent cations stiffened the P. aeruginosa biofilm, while ciprofloxacin and glutaraldehyde weakened it. Urea, rifampin, and a quaternary ammonium biocide weakened the S. epidermidis biofilm. In general, there was no correspondence between the responses of the two different types of biofilms to a particular treatment. These results underscore the distinction between the killing power of an antimicrobial agent and its ability to alter biofilm mechanical properties and thereby influence biofilm removal. Understanding biofilm rheology and how it is affected by chemical treatment could lead to improvements in biofilm control. 相似文献
11.
Antonio Di Stefano Eleonora D'Aurizio Oriana Trubiani Rossella Grande Emanuela Di Campli Mara Di Giulio Soraya Di Bartolomeo Piera Sozio Antonio Iannitelli Antonia Nostro Luigina Cellini 《Microbial biotechnology》2009,2(6):634-641
The viscoelastic properties of mono‐microbial biofilms produced by ocular and reference staphylococcal strains were investigated. The microorganisms were characterized for their haemolytic activity and agr typing and the biofilms, grown on stainless steel surface under static conditions, were analysed by Confocal Laser Scanning Microscopy. Static and dynamic rheometric tests were carried out to determine the steady‐flow viscosity and the elastic and viscous moduli. The analysed biofilms showed the typical time‐dependent behaviour of viscoelastic materials with considerable elasticity and mechanical stability except for Staphylococcus aureus ATCC 29213 biofilm which showed a very fragile structure. In particular, S. aureus 6ME biofilm was more compact than other staphylococcal biofilms studied with a yield stress ranging between 2 and 3 Pa. The data obtained in this work could represent a starting point for developing new therapeutic strategies against biofilm‐associated infections, such as improving the drug effect by associating an antimicrobial agent with a biofilm viscoelasticity modifier. 相似文献
12.
The macromolecular organization of vitreous gel is responsible for its viscoelastic properties. Knowledge of this correlation enables us to relate the physical properties of vitreous to its pathology, as well as optimize surgical procedures such as vitrectomy. Herein, we studied the rheological properties (e.g. dynamic deformation, shear stress-strain flow, and creep compliance) of porcine vitreous humor using a stressed-control shear rheometer. All experiments were performed in a closed environment with the temperature set to that of the human body (i.e. 37°C) to mimic in-vivo conditions. We modeled the creep deformation using the two-element retardation spectrum model. By associating each element of the model to an individual biopolymeric system in the vitreous gel, a distinct response to the applied stress was observed from each component. We hypothesized that the first viscoelastic response with the short time scale (~1 s) is associated with the collagen structure, while the second viscoelastic response with longer time scale (~100 s) is related to the microfibrilis and hyaluronan network. Consequently, we were able to differentiate the role of each main component from the overall viscoelastic properties. 相似文献
13.
A chemostat mixed culture system was used to produce two distinct ecological states, state-1 (caries-like microcosm) and state-2 (periodontal-like microcosm). Eleven bacterial species (Streptococcus gordonii, Strep. mitis I, Strep. mutans, Strep. oralis, Actinomyces naeslundii, Lactobacillus casei, Neisseria subflava, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella nigrescens, Veillonella dispar) were used to inoculate the planktonic system. A flow cell, designed to produce convergent flow with increasing shear stress, was attached to the chemostat system, and the resultant biofilms developed from the state-1 and state-2 microcosms along the shear stress gradient were examined and compared using image analysis and viable counts. The biofilm produced from state-1 showed a lower shear stress tolerance (0.146 Pa) than the state-2 biofilm (0.236 Pa). The biofilm compositions did not vary along the gradient of shear stress and were dependent on the initial inoculum conditions. Gram-positive species were predominant in the state-1 biofilm, while Gram-negative species were predominant in state-2. 相似文献
14.
Srijan Aggarwal Eric H. Poppele Raymond M. Hozalski 《Biotechnology and bioengineering》2010,105(5):924-934
Cohesive strength is an important parameter for understanding and modeling the mechanics of biomass detachment from bacterial biofilms. It is challenging to measure the mechanical properties of biofilms, however, because biofilms may desiccate when removed from liquid medium and they are inherently fragile. Poppele and Hozalski (Poppele and Hozalski, 2003, J Microb Methods 55:607–615) presented a microcantilever method for measuring the tensile strength of detached biofilm fragments while submersed in liquid medium. Here we present a modification of the microcantilever method to quantify the strength of intact bacterial biofilms. Initial testing was performed on Pseudomonas aeruginosa biofilms and on Staphylococcus epidermidis biofilms grown in rotating disk reactors. The cohesive strength values were highly variable (i.e., coefficients of variation ranging from 71% to 143%) and ranged from 59 to 18,900 Pa for the P. aeruginosa biofilms and from 61 to 5,840 Pa for the S. epidermidis biofilms. The biofilms also appeared to be isotropic as strength did not vary with angle of testing relative to the direction of applied shear. Strength testing using both the intact and fragment methods was performed on five samples of P. aeruginosa biofilms, and the strength populations were not from the same distribution in three cases. Equivalent diameters for the fragments detached from biofilms during strength testing ranged from 5 to 500 µm, which is within the range of size of biofilm fragments observed in the effluents of lab‐scale and full‐scale bioreactors. The microcantilever is a simple yet powerful tool for measuring the cohesive strength of intact biofilms at a relevant scale. Biotechnol. Bioeng. 2010;105: 924–934. © 2009 Wiley Periodicals, Inc. 相似文献
15.
A biofilm reactor was constructed to monitor the long-term growth and removal of biofilms as monitored by the use of a quartz crystal microbalance (QCM) and a novel optical method. The optical method measures the reflectance of white light off the surface of the quartz crystal microbalance electrode (gold) for determination of the biofilm thickness. Biofilm growth of Pseudomonas aeruginosa (PA) on the surface was used as a model system. Bioreactors were monitored for over 6 days. Expressing the QCM data as the ratio of changes in resistance to changes in frequency (DeltaR/Deltaf) facilitated the comparison of individual biofilm reactor runs. The various stages of biofilm growth and adaptation to low nutrients showed consistent characteristic changes in the DeltaR/Deltaf ratio, a parameter that reflects changes in the viscoelastic properties of the biofilm. The utility of white light reflectance for thickness measurements was shown for those stages of biofilm growth when the solution was not turbid due to high numbers of unattached cells. The thickness of the biofilms after 6 days ranged from 48 mum to 68 mum. Removal of the biofilm by a disinfectant (chlorine) was also measured in real time. The combination of QCM and reflectance allowed us to monitor in real time changes in the viscoelastic properties and thickness of biofilms over long periods of time. 相似文献
16.
A two-dimensional finite element model of the biofilm response to flow was developed. The numerical code sequentially coupled the fluid dynamics of turbulent, incompressible flow with the mechanical response of a single hemispherical biofilm cluster (approximately 100 microm) attached to the flow boundary. A non-linear Burger material law was used to represent the viscoelastic response of a representative microbial biofilm. This constitutive law was incorporated into the numerical model as a Prony series representation of the biofilm's relaxation modulus. Model simulations illuminated interesting details of this fluid-structure interaction. Simulations revealed that softer biofilms (characterized by lower elastic moduli) were highly susceptible to lift forces and consequently were subject to even greater drag forces found higher in the velocity field. A bimodal deformation path due to the two Burger relaxation times was also observed in several simulations. This suggested that interfacial biofilm may be most susceptible to hydrodynamically induced detachment during the initial relaxation time. This result may prove useful in developing removal strategies. Additionally, plots of lift versus drag suggested that the deformation paths taken by viscoelastic biofilms are largely insensitive to specific material coefficients. Softer biofilms merely seem to follow the same path (as a stiffer biofilm) at a faster rate. These relationships may be useful in estimating the hydrodynamic forces acting on an attached biofilm based on changes in scale and cataloged material properties. 相似文献
17.
A digital image correlation (DIC) method was applied to characterize the mechanical behavior of Pseudomonas aeruginosa biofilms in response to wall shear stress using digital video micrographs taken from biofilm flow cells. The appearance of the biofilm in the transmitted light photomicrographs presented a natural texture which was highly conducive to random encoding for DIC. The displacement fields were calculated for two biofilm specimens. The DIC method concurred with previous analysis showing that biofilms exhibit viscoelastic behavior, but had the advantage over simple length measurements of longitudinal strain that it could precisely measure local strains in length (x) and width (y) within biofilm clusters with a 2 μm resolution as a function of time and wall shear stress. It was concluded that DIC was more accurate at measuring elastic moduli than simple length measurements, but that time-lapse 3D images would enable even more accurate estimates to be performed. 相似文献
18.
Möhle RB Langemann T Haesner M Augustin W Scholl S Neu TR Hempel DC Horn H 《Biotechnology and bioengineering》2007,98(4):747-755
The cohesive strength of microbial biofilms cultivated on a rotating disc has been measured using fluid dynamic gauging (FDG). The thickness of heterotrophic mixed culture biofilms was found to depend on substrate concentration and shear force at the biofilm surface during the cultivation. For high substrate concentrations and low shear forces the biofilm thickness increased to several 100 microm within 7 days. Low substrate concentration and higher shear forces yielded thin biofilms of about 100 microm thickness. Independent from cultivation conditions and thickness of the biofilms their cohesive strength ranged between 6.0 and 7.7 N m(-2). The ratio between cohesive strength measured with FDG and shear forces applied during biofilm cultivation have ranged from 200 to 1,100. Higher concentrations of iron in the cultivation media has a positive effect on the stability of the biofilms cultivated. By using the CLSM technique a stable base biofilm with a high amount of stained EPS glycoconjugates could be visualized after gauging. The thickness of the base biofilm was about 100 microm for all biofilms cultivated and was not removable under the applied shear conditions used during FDG. 相似文献
19.
Biljana Stojkovi? Simon Sretenovic Iztok Dogsa Igor Poberaj David Stopar 《Biophysical journal》2015,108(3):758-765
We studied the viscoelastic properties of homogeneous and inhomogeneous levan-DNA mixtures using optical tweezers and a rotational rheometer. Levan and DNA are important components of the extracellular matrix of bacterial biofilms. Their viscoelastic properties influence the mechanical as well as molecular-transport properties of biofilm. Both macro- and microrheology measurements in homogeneous levan-DNA mixtures revealed pseudoplastic behavior. When the concentration of DNA reached a critical value, levan started to aggregate, forming clusters of a few microns in size. Microrheology using optical tweezers enabled us to measure local viscoelastic properties within the clusters as well as in the DNA phase surrounding the levan aggregates. In phase-separated levan-DNA mixtures, the results of macro- and microrheology differed significantly. The local viscosity and elasticity of levan increased, whereas the local viscosity of DNA decreased. On the other hand, the results of bulk viscosity measurements suggest that levan clusters do not interact strongly with DNA. Upon treatment with DNase, levan aggregates dispersed. These results demonstrate the advantages of microrheological measurements compared to bulk viscoelastic measurements when the materials under investigation are complex and inhomogeneous, as is often the case in biological samples. 相似文献
20.
Biofilms can increase pathogenic contamination of drinking water, cause biofilm-related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early-stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early-stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early-stage Pseudomonas putida biofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early-stage biofilm growth is suppressed under high flow conditions and that the local velocity for early-stage P. putida biofilms (growth time < 14 h) to develop is about 50 μm/s, which is similar to P. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early-stage biofilms by increasing the area of the low-flow region. Furthermore, we show that the critical average shear stress, above which early-stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early-stage biofilm development, characterized in this study, will facilitate future predictions and managements of early-stage P. putida biofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments. 相似文献