In vivo self-hydroxylation of an iron-substituted manganese-dependent extradiol cleaving catechol dioxygenase

The homoprotocatechuate 2,3-dioxygenase from Arthrobacter globiformis (MndD) catalyzes the oxidative ring cleavage reaction of its catechol substrate in an extradiol fashion. Although this reactivity is more typically associated with non-heme iron enzymes, MndD exhibits an unusual specificity for manganese(II). MndD is structurally very similar to the iron(II)-dependent homoprotocatechuate 2,3-dioxygenase from Brevibacterium fuscum (HPCD), and we have previously shown that both MndD and HPCD are equally active towards substrate turnover with either iron(II) or manganese(II) (Emerson et al. in Proc. Natl. Acad. Sci. USA 105:7347–7352, 2008). However, expression of MndD in Escherichia coli under aerobic conditions in the presence of excess iron results in the isolation of inactive blue-green iron-substituted MndD. Spectroscopic studies indicate that this form of iron-substituted MndD contains an iron(III) center with a bound catecholate, which is presumably generated by in vivo self-hydroxylation of a second-sphere tyrosine residue, as found for other self-hydroxylated non-heme iron oxygenases. The absence of this modification in either the native manganese-containing MndD or iron-containing HPCD suggests that the metal center of iron-substituted MndD is able to bind and activate O₂ in the absence of its substrate, employing a high-valence oxoiron oxidant to carry out the observed self-hydroxylation chemistry. These results demonstrate that the active site metal in MndD can support two dramatically different O₂ activation pathways, further highlighting the catalytic flexibility of enzymes containing a 2-His-1-carboxylate facial triad metal binding motif.     

Thermodynamics of substrate binding to the metal site in homoprotocatechuate 2,3-dioxygenase: Using ITC under anaerobic conditions to study enzyme–substrate interactions

BackgroundExtradiol dioxygenases are a family of nonheme iron (and sometimes manganese) enzymes that catalyze an O₂-dependent ring-opening reaction in a biodegradation pathway of aromatic compounds. Here we characterize the thermodynamics of two substrates binding in homoprotocatechuate 2,3-dioxygenase (HPCD) prior to the O₂ activation step.MethodsThis study uses microcalorimetry under an inert atmosphere to measure thermodynamic parameters associated with catechol binding to nonheme metal centers in HPCD. Several stopped-flow rapid mixing experiments were used to support the calorimetry experiments.ResultsThe equilibria constant for 4-nitrocatechol and homoprotocatechuate binding to the iron(II) and manganese(II) forms of HPCD range from 2 × 10⁴ to 1 × 10⁶, suggesting there are distinctive differences in how the enzyme–substrate complexes are stabilized. Further experiments in multiple buffers allowed us to correct the experimental ΔH for substrate ionization and to fully derive the pH and buffer independent thermodynamic parameters for substrate binding to HPCD. Fewer protons are released from the iron(II) dependent processes than their manganese(II) counterparts.ConclusionsCondition independent thermodynamic parameters for 4-nitrocatechol and homoprotocatechuate binding to HPCD are highly consistent with each other, suggesting these enzyme–substrate complexes are more similar than once thought, and the ionization state of metal coordinated waters may be playing a role in tuning redox potential and in governing reactivity.General significanceSubstrate binding to HPCD is a complex set of equilibria that includes ionization of substrate and water release, yet it is also the key step in O₂ activation. This article is part of a Special Issue entitled Microcalorimetry in the BioSciences — Principles and Applications, edited by Fadi Bou-Abdallah.     

Thermodynamic and mutational studies of l-N-carbamoylase from Sinorhizobium meliloti CECT 4114 catalytic centre

Purified site-directed mutants of Sinorhizobium meliloti CECT 4114 l-N-carbamoylase (SmLcar) in which Glu132, His230, Asn279 and Arg292 were replaced have been studied by kinetic methods and isothermal titration calorimetry (ITC). The importance of His230, Asn279 and Arg292 residues in the recognition of N-carbamoyl-l-alpha-amino acids has been proved. The role of Glu132 has been confirmed in substrate hydrolysis. ITC has confirmed two Ni atoms per monomer of wild type enzyme, and two equal and independent substrate binding sites (one per monomer). Homology modelling of SmLcar supports the importance of His87, His194, His386, Glu133 and Asp98 in metal binding. A comprehensive reaction mechanism is proposed on the basis of binding experiments measured by ITC, kinetic assays, and homology of the active centre with beta-alanine synthase from Saccharomyces kluyveri and other enzymes.     

An additional substrate binding site in a bacterial phenylalanine hydroxylase

Phenylalanine hydroxylase (PAH) is a non-heme iron enzyme that catalyzes oxidation of phenylalanine to tyrosine, a reaction that must be kept under tight regulatory control. Mammalian PAH has a regulatory domain in which binding of the substrate leads to allosteric activation of the enzyme. However, the existence of PAH regulation in evolutionarily distant organisms, for example some bacteria in which it occurs, has so far been underappreciated. In an attempt to crystallographically characterize substrate binding by PAH from Chromobacterium violaceum, a single-domain monomeric enzyme, electron density for phenylalanine was observed at a distal site 15.7 Å from the active site. Isothermal titration calorimetry (ITC) experiments revealed a dissociation constant of 24 ± 1.1 μM for phenylalanine. Under the same conditions, ITC revealed no detectable binding for alanine, tyrosine, or isoleucine, indicating the distal site may be selective for phenylalanine. Point mutations of amino acid residues in the distal site that contact phenylalanine (F258A, Y155A, T254A) led to impaired binding, consistent with the presence of distal site binding in solution. Although kinetic analysis revealed that the distal site mutants suffer discernible loss of their catalytic activity, X-ray crystallographic analysis of Y155A and F258A, the two mutants with the most noticeable decrease in activity, revealed no discernible change in the structure of their active sites, suggesting that the effect of distal binding may result from protein dynamics in solution.     

Characterization of the nitrosyl adduct of substrate-bound mouse cysteine dioxygenase by electron paramagnetic resonance: electronic structure of the active site and mechanistic implications

Mammalian cysteine dioxygenase (CDO) is a non-heme iron metalloenzyme that catalyzes the first committed step in oxidative cysteine catabolism. The active site coordination of CDO comprises a mononuclear iron ligated by the Nepsilon atoms of three protein-derived histidines, thus representing a new variant on the 2-histidine-1-carboxylate (2H1C) facial triad motif. Nitric oxide was used as a spectroscopic probe in investigating the order of substrate-O2 binding by EPR spectroscopy. In these experiments, CDO exhibits an ordered binding of l-cysteine prior to NO (and presumably O2) similar to that observed for the 2H1C class of non-heme iron enzymes. Moreover, the CDO active site is essentially unreactive toward NO in the absence of substrate, suggesting an obligate ordered binding of l-cysteine prior to NO. Typically, addition of NO to a mononuclear non-heme iron center results in the formation of an {FeNO}7 (S = 3/2) species characterized by an axial EPR spectrum with gx, gy, and gz values of approximately 4, approximately 4, and approximately 2, respectively. However, upon addition of NO to CDO in the presence of substrate l-cysteine, a low-spin {FeNO}7 (S = 1/2) signal that accounts for approximately 85% of the iron within the enzyme develops. Similar {FeNO}7 (S = 1/2) EPR signals have been observed for a variety of octahedral mononuclear iron-nitrosyl synthetic complexes; however, this type of iron-nitrosyl species is not commonly observed for non-heme iron enzymes. Substitution of l-cysteine with isosteric substrate analogues cysteamine, 3-mercaptopropionic acid, and propane thiol did not produce any analogous {FeNO}7 signals (S = 1/2 or 3/2), thus reflecting the high substrate specificity of the enzyme observed by a number of researchers. The unusual {FeNO}7 (S = 1/2) electronic configuration adopted by the substrate-bound iron-nitrosyl CDO (termed {ES-NO}7) is a result of the bidentate thiol/amine coordination of l-cysteine in the NO-bound CDO active site. DFT computations were performed to further characterize this species. The DFT-predicted geometric parameters for {ES-NO}7 are in good agreement with the crystallographically determined substrate-bound active site configuration of CDO and are consistent with known iron-nitrosyl model complexes. Moreover, the computed EPR parameters (g and A values) are in excellent agreement with experimental results for this CDO species and those obtained from comparable synthetic {FeNO}7 (S = 1/2) iron-nitrosyl complexes.     

Intermediate in the O-O bond cleavage reaction of an extradiol dioxygenase

The reactive oxy intermediate of the catalytic cycle of extradiol aromatic ring-cleaving dioxygenases is formed by binding the catecholic substrate and O2 in adjacent ligand positions of the active site metal [usually Fe(II)]. This intermediate and the following Fe(II)-alkylperoxo intermediate resulting from oxygen attack on the substrate have been previously characterized in a crystal of homoprotocatechuate 2,3-dioxygenase (HPCD). Here a subsequent intermediate in which the O-O bond is broken to yield a gem diol species is structurally characterized. This new intermediate is stabilized in the crystal by using the alternative substrate, 4-sulfonylcatechol, and the Glu323Leu variant of HPCD, which alters the crystal packing.     

Theoretical studies of enzyme mechanisms involving high-valent iron intermediates

Recent theoretical contributions to the elucidation of mechanisms for iron containing enzymes are reviewed. The method used in most of these studies is hybrid density functional theory with the B3LYP functional. Three classes of enzymes are considered, the mononuclear non-heme enzymes, enzymes containing iron dimers, and heme-containing enzymes. Mechanisms for both dioxygen and substrate activations are discussed. The reactions usually go through two half-cycles, where a high-valent intermediate Fe(IV)O species is created in the first half-cycle, and the substrate reactions involving this intermediate occur in the second half-cycle. Similarities between the three classes of enzymes dominate, but significant differences also exist.     

Structural studies on the reaction of isopenicillin N synthase with the truncated substrate analogues delta-(L-alpha-aminoadipoyl)-L-cysteinyl-glycine and delta-(L-alpha-aminoadipoyl)-L-cysteinyl-D-alanine

Isopenicillin N synthase (IPNS), a non-heme iron(II)-dependent oxidase, catalyzes conversion of the tripeptide delta-(l-alpha-aminoadipoyl)-l-cysteinyl-d-valine (ACV) to bicyclic isopenicillin N (IPN), concomitant with the reduction of dioxygen to two molecules of water. Incubation of the "truncated"substrate analogues delta-(l-alpha-aminoadipoyl)-l-cysteinyl-glycine (ACG) and delta-(l-alpha-aminoadipoyl)-l-cysteinyl-d-alanine (ACA) with IPNS has previously been shown to afford acyclic products, in which the substrate cysteinyl residue has undergone a two-electron oxidation. We report X-ray crystal structures for the anaerobic IPNS/Fe(II)/ACG and IPNS/Fe(II)/ACA complexes, both in the absence and presence of the dioxygen analogue nitric oxide. The overall protein structures are very similar to those of the corresponding IPNS/Fe(II)/ACV complexes; however, significant differences are apparent in the vicinity of the active site iron. The structure of the IPNS/Fe(II)/ACG complex reveals that the C-terminal carboxylate of this substrate is oriented toward the active site iron atom, apparently hydrogen-bonded to an additional water ligand at the metal; this is a different binding mode to that observed in the IPNS/Fe(II)/ACV complex. ACA binds to the metal in a manner that is intermediate between those observed for ACV and ACG. The addition of NO to these complexes initiates conformational changes such that both the IPNS/Fe(II)/ACG/NO and IPNS/Fe(II)/ACA/NO structures closely resemble the IPNS/Fe(II)/ACV/NO complex. These results further demonstrate the feasibility of metal-centered rearrangements in catalysis by non-heme iron enzymes and provide insight into the delicate balance between hydrophilic-hydrophobic interactions and steric effects in the IPNS active site.     

4-Nitrocatechol as a probe of a Mn(II)-dependent extradiol-cleaving catechol dioxygenase (MndD): comparison with relevant Fe(II) and Mn(II) model complexes

Mn(II)-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase (MndD) is an extradiol-cleaving catechol dioxygenase from Arthrobacter globiformis that has 82% sequence identity to and cleaves the same substrate (3,4-dihydroxyphenylacetic acid) as Fe(II)-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase (HPCD) from Brevibacterium fuscum. We have observed that MndD binds the chromophoric 4-nitrocatechol (4-NCH(2)) substrate as a dianion and cleaves it extremely slowly, in contrast to the Fe(II)-dependent enzymes which bind 4-NCH(2) mostly as a monoanion and cleave 4-NCH(2) 4-5 orders of magnitude faster. These results suggest that the monoanionic binding state of 4-NC is essential for extradiol cleavage. In order to address the differences in 4-NCH(2) binding to these enzymes, we synthesized and characterized the first mononuclear monoanionic and dianionic Mn(II)-(4-NC) model complexes as well as their Fe(II)-(4-NC) analogs. The structures of [(6-Me(2)-bpmcn)Fe(II)(4-NCH)](+), [(6-Me(3)-TPA)Mn(II)(DBCH)](+), and [(6-Me(2)-bpmcn)Mn(II)(4-NCH)](+) reveal that the monoanionic catecholate is bound in an asymmetric fashion (Delta r(metal-O(catecholate))=0.25-0.35 A), as found in the crystal structures of the E(.)S complexes of extradiol-cleaving catechol dioxygenases. Acid-base titrations of [(L)M(II)(4-NCH)](+) complexes in aprotic solvents show that the p K(a) of the second catecholate proton of 4-NCH bound to the metal center is half a p K(a) unit higher for the Mn(II) complexes than for the Fe(II) complexes. These results are in line with the Lewis acidities of the two divalent metal ions but are the opposite of the trend observed for 4-NCH(2) binding to the Mn(II)- and Fe(II)-catechol dioxygenases. These results suggest that the MndD active site decreases the second p K(a) of the bound 4-NCH(2) relative to the HPCD active site.     

Dicamba Monooxygenase: Structural Insights into a Dynamic Rieske Oxygenase that Catalyzes an Exocyclic Monooxygenation

Dicamba (2-methoxy-3,6-dichlorobenzoic acid) O-demethylase (DMO) is the terminal Rieske oxygenase of a three-component system that includes a ferredoxin and a reductase. It catalyzes the NADH-dependent oxidative demethylation of the broad leaf herbicide dicamba. DMO represents the first crystal structure of a Rieske non-heme iron oxygenase that performs an exocyclic monooxygenation, incorporating O₂ into a side-chain moiety and not a ring system. The structure reveals a 3-fold symmetric trimer (α₃) in the crystallographic asymmetric unit with similar arrangement of neighboring inter-subunit Rieske domain and non-heme iron site enabling electron transport consistent with other structurally characterized Rieske oxygenases. While the Rieske domain is similar, differences are observed in the catalytic domain, which is smaller in sequence length than those described previously, yet possessing an active-site cavity of larger volume when compared to oxygenases with larger substrates. Consistent with the amphipathic substrate, the active site is designed to interact with both the carboxylate and aromatic ring with both key polar and hydrophobic interactions observed. DMO structures were solved with and without substrate (dicamba), product (3,6-dichlorosalicylic acid), and either cobalt or iron in the non-heme iron site. The substitution of cobalt for iron revealed an uncommon mode of non-heme iron binding trapped by the non-catalytic Co²⁺, which, we postulate, may be transiently present in the native enzyme during the catalytic cycle. Thus, we present four DMO structures with resolutions ranging from 1.95 to 2.2 Å, which, in sum, provide a snapshot of a dynamic enzyme where metal binding and substrate binding are coupled to observed structural changes in the non-heme iron and catalytic sites.     

Functional roles of H98 and W99 and β2α2 loop dynamics in the α-l-arabinofuranosidase from Thermobacillus xylanilyticus

This study is focused on the elucidation of the functional role of the mobile β2α2 loop in the α-l-arabinofuranosidase from Thermobacillus?xylanilyticus, and particularly on the roles of loop residues H98 and W99. Using site-directed mutagenesis, coupled to characterization methods including isothermal titration calorimetry (ITC) and saturation transfer difference nuclear magnetic resonance (STD-NMR) spectroscopy, and molecular dynamics simulations, it has been possible to provide a molecular level view of interactions and the consequences of mutations. Binding of para-nitrophenyl α-l-arabinofuranoside (pNP-α-l-Araf) to the wild-type arabinofuranosidase was characterized by K(d) values (0.32 and 0.16?mm, from ITC and STD-NMR respectively) that highly resembled that of the arabinoxylo-oligosaccharide XA(3) XX (0.21?mm), and determination of the thermodynamic parameters of enzyme?:?pNP-α-l-Araf binding revealed that this process is driven by favourable entropy, which is linked to the movement of the β2α2 loop. Loop closure relocates the solvent-exposed W99 into a buried location, allowing its involvement in substrate binding and in the formation of a functional active site. Similarly, the data underline the role of H98 in the 'dynamic' formation and definition of a catalytically operational active site, which may be a specific feature of a subset of GH51 arabinofuranosidases. Substitution of H98 and W99 by alanine or phenylalanine revealed that mutations affected K(M) and/or k(cat) . Molecular dynamics performed on W99A implied that this mutation causes the loss of a hydrogen bond and leads to an alternative binding mode that is detrimental for catalysis. STD-NMR experiments revealed altered binding of the aglycon motif in the active site, combined with reduced STD intensities of the α-l-arabinofuranosyl moiety for W99 substitutions.     

Kinetic and thermodynamic characterization of the functional properties of a hybrid versatile peroxidase using isothermal titration calorimetry: Insight into manganese peroxidase activation and lignin peroxidase inhibition

Isothermal titration calorimetry (ITC) was developed for measuring lignin peroxidase (LiP) and manganese peroxidase (MnP) activities of versatile peroxidase (VP) from Bjerkandera adusta. Developing an ITC approach provided an alternative to colorimetric methods that enabled reaction kinetics to be accurately determined. Although VP from Bjerkandera adjusta is a hybrid enzyme, specific conditions of [Mn+2] and pH were defined that limited activity to either LiP or MnP activities, or enabled both to be active simultaneously. MnP activity was found to be more efficient than LiP activity, with activity increasing with increasing concentrations of Mn+2. These properties of MnP were explained by a second metal binding site involved in homotropic substrate (Mn+2) activation. The activation of MnP was also accompanied by a decrease in both activation energy and substrate (Mn) affinity, reflecting a flexible enzyme structure. In contrast to MnP activity, LiP activity was inhibited by high dye (substrate) concentrations arising from uncompetitive substrate inhibition caused by substrate binding to a site distinct from the catalytic site. Our study provides a new level of understanding about the mechanism of substrate regulation of catalysis in VP from B. adjusta, providing insight into a class of enzyme, hybrid class II peroxidases, for which little experimental data is available.     

Versatility of biological non-heme Fe(II) centers in oxygen activation reactions

Oxidase and oxygenase enzymes allow the use of relatively unreactive O2 in biochemical reactions. Many of the mechanistic strategies used in nature for this key reaction are represented within the 2-histidine-1-carboxylate facial triad family of non-heme Fe(II)-containing enzymes. The open face of the metal coordination sphere opposite the three endogenous ligands participates directly in the reaction chemistry. Here, data from several studies are presented showing that reductive O2 activation within this family is initiated by substrate (and in some cases cosubstrate or cofactor) binding, which then allows coordination of O2 to the metal. From this starting point, the O2 activation process and the reactions with substrates diverge broadly. The reactive species formed in these reactions have been proposed to encompass four oxidation states of iron and all forms of reduced O2 as well as several of the reactive oxygen species that derive from O-O bond cleavage.     

Structure-function analysis of cytochromes P450 2B

In the last 4 years, breakthroughs were made in the field of P450 2B (CYP2B) structure-function through determination of one ligand-free and two inhibitor-bound X-ray crystal structures of CYP2B4, which revealed many of the structural features required for binding ligands of different size and shape. Large conformational changes of several plastic regions of CYP2B4 can dramatically reshape the active site of the enzyme to fit the size and shape of the bound ligand without perturbing the overall P450 fold. Solution biophysical studies using isothermal titration calorimetry (ITC) have revealed the large difference in the thermodynamic parameters of CYP2B4 in binding inhibitors of different ring chemistry and side chains. Other studies have revealed that the effects of site-specific mutations on steady-state kinetic parameters and mechanism-based inactivation are often substrate dependent. These findings agree with the structural data that the enzymes adopt different conformations to bind various ligands. Thus, the substrate specificity of an individual enzyme is determined not only by active site residues but also non-active site residues that modulate conformational changes that are important for substrate access and rearrangement of the active site to accommodate the bound substrate.     

Structure–function analysis of cytochromes P450 2B

In the last 4 years, breakthroughs were made in the field of P450 2B (CYP2B) structure–function through determination of one ligand-free and two inhibitor-bound X-ray crystal structures of CYP2B4, which revealed many of the structural features required for binding ligands of different size and shape. Large conformational changes of several plastic regions of CYP2B4 can dramatically reshape the active site of the enzyme to fit the size and shape of the bound ligand without perturbing the overall P450 fold. Solution biophysical studies using isothermal titration calorimetry (ITC) have revealed the large difference in the thermodynamic parameters of CYP2B4 in binding inhibitors of different ring chemistry and side chains. Other studies have revealed that the effects of site-specific mutations on steady-state kinetic parameters and mechanism-based inactivation are often substrate dependent. These findings agree with the structural data that the enzymes adopt different conformations to bind various ligands. Thus, the substrate specificity of an individual enzyme is determined not only by active site residues but also non-active site residues that modulate conformational changes that are important for substrate access and rearrangement of the active site to accommodate the bound substrate.     

The 2-His-1-carboxylate facial triad: a versatile platform for dioxygen activation by mononuclear non-heme iron(II) enzymes

General knowledge of dioxygen-activating mononuclear non-heme iron(II) enzymes containing a 2-His-1-carboxylate facial triad has significantly expanded in the last few years, due in large part to the extensive library of crystal structures that is now available. The common structural motif utilized by this enzyme superfamily acts as a platform upon which a wide assortment of substrate transformations are catalyzed. The facial triad binds a divalent metal ion at the active site, which leaves the opposite face of the octahedron available to coordinate a variety of exogenous ligands. The binding of substrate activates the metal center for attack by dioxygen, which is subsequently converted to a high-valent iron intermediate, a formidable oxidizing species. Herein, we summarize crystallographic and mechanistic features of this metalloenzyme superfamily, which has enabled the proposal of a common but flexible pathway for dioxygen activation.     

Redox-linked Gating of Nucleotide Binding by the N-terminal Domain of Adenosine 5′-Phosphosulfate Kinase

Adenosine 5′-phosphosulfate kinase (APSK) catalyzes the phosphorylation of adenosine 5′-phosphosulfate (APS) to 3′-phosphoadenosine-5′-phosphosulfate (PAPS). Crystallographic studies of APSK from Arabidopsis thaliana revealed the presence of a regulatory intersubunit disulfide bond (Cys⁸⁶–Cys¹¹⁹). The reduced enzyme displayed improved catalytic efficiency and decreased effectiveness of substrate inhibition by APS compared with the oxidized form. Here we examine the effect of disulfide formation and the role of the N-terminal domain on nucleotide binding using isothermal titration calorimetry (ITC) and steady-state kinetics. Formation of the disulfide bond in A. thaliana APSK (AtAPSK) inverts the binding affinities at the ATP/ADP and APS/PAPS sites from those observed in the reduced enzyme, consistent with initial binding of APS as inhibitory, and suggests a role for the N-terminal domain in guiding nucleotide binding order. To test this, an N-terminal truncation variant (AtAPSKΔ96) was generated. The resulting protein was completely insensitive to substrate inhibition by APS. ITC analysis of AtAPSKΔ96 showed decreased affinity for APS binding, although the N-terminal domain does not directly interact with this ligand. Moreover, AtAPSKΔ96 displayed reduced affinity for ADP, which corresponds to a loss of substrate inhibition by formation of an E·ADP·APS dead end complex. Examination of the AtAPSK crystal structure suggested Arg⁹³ as important for positioning of the N-terminal domain. ITC and kinetic analysis of the R93A mutant also showed a complete loss of substrate inhibition and altered nucleotide binding affinities, which mimics the effect of the N-terminal deletion. These results show how thiol-linked changes in AtAPSK alter the energetics of binding equilibria to control its activity.     

4-Nitrocatechol as a colorimetric probe for non-heme iron dioxygenases.

4-Nitrocatechol is examined as an active site probe for non-heme iron dioxygenases and found to be of value, particularly with those containing iron in the Fe(II) oxidation state. 4-Nitrocatechol is astrong competitive inhibitor of substrate oxygenation by protocatechuate 3,4-dioxygenase, forming a reversible complex with this enzyme, and by pyrocatechase. The number of binding sites per enzyme molecule titrated spectrophotometrically with 4-nitrocatechol agrees with results from previous studies with either the principal substrate or other analogues, as expected of an effective probe. Despite these facts and the observation that both enzymes cleave the same substrates at the same carbon-carbon bond, the optical and electron paramagnetic resonance (EPR) spectra of their 4-nitrocatechol complexes are remarkably different. The 4-nitocatechol-protocatechuate 3,4-dioxygenase optical spectra resemble that of the 4-nitrocatecholate ion shifted 20 to 30 nm to longer wavelength. Concomitant with this change the EPR signal centered at g equal 4.28 shows increased rhombicity (g values at 4.74, 4.28, and 3.74).In contrast, the spectrum of the 4-nitrocatechol-pyrocatechase complex has a maximum at the same wavelength as that of a 1:1 solution of free Fe(II) and 4-nitrocatechol in the absence of enzyme after titration of the catecholic protons with base and the g equal 4.28 EPR signal is not resolved at liquid N-2 temperature. These changes are interpreted as resulting in part from a pronounced change in the ligand fields about the irons at the active sites which in the case of protocatechuate 3,4-dioxygenase leads to enzyme inactivation. The results also are the first indication that substrate analogues change their ionization form upon complexation with Fe (III) dioxygenases. The interaction of the probe with metapyrocatechase, an Fe(III) containing dioxygenase, and with several additional oxygenases and hydroperoxidases is also briefly examined. The probe is not specific for any particular class of non-heme iron dioxygenases.     

Enzymatic activity of immobilized enzyme determined by isothermal titration calorimetry

The activity of adsorbed β-glucosidase onto spherical polyelectrolyte brushes (SPBs) is investigated by UV-Vis spectroscopy and isothermal titration calorimetry (ITC). By comparing the results of these two methods, we demonstrate that ITC is a precise method for the study of the activity of immobilized enzymes. The carrier particles used for immobilization here consist of a polystyrene core onto which poly(acrylic acid) chains are grafted. High amounts of enzyme can be immobilized in the brush layer at low ionic strength by the polyelectrolyte-mediated protein adsorption (PMPA). Analysis of the activity of β-glucosidase was done in terms of Michaelis-Menten kinetics. Moreover, the enzymatic activity of immobilized enzyme is studied by ITC using cellobiose as substrate. All data show that ITC is a general method for the study of the activity of immobilized enzymes.     

Nanomolar binding affinity of quinine-based antimalarial compounds by the cocaine-binding aptamer

An unusual feature of the cocaine-binding aptamer is that it binds quinine much tighter than the ligand it was selected for, cocaine. Here we expand the repertoire of ligands that this aptamer binds to include the quinine-based antimalarial compounds amodiaquine, mefloquine, chloroquine and primaquine. Using isothermal titration calorimetry (ITC) we show that amodiaquine is bound by the cocaine-binding aptamer with an affinity of (7?±?4) nM, one of the tightest aptamer-small molecule affinities currently known. Amodiaquine, mefloquine and chloroquine binding are driven by both a favorable entropy and enthalpy of binding, while primaquine, quinine and cocaine binding are enthalpy driven with unfavorable binding entropy. Using nuclear magnetic resonance (NMR) and ITC methods we show that these ligands compete for the same binding sites in the aptamer. Our identification of such a tight binding ligand for this aptamer should prove useful in developing new biosensor techniques and applications using the cocaine-binding aptamer as a model system.