Aggregation properties of cold-active lipase produced by a psychrotolerant strain of Pseudomonas palleroniana (GBPI_508)

Abstract

The present study aims to exploit microbial potential from colder region to produce lipase enzyme stable at low temperatures. A newly isolated bacterium GBPI_508 from Himalayan environment, was investigated for the production of cold-active lipase emphasizing on its aggregation properties. Plate based assays followed by quantitative production of enzyme was estimated under different culture conditions. Further characterization of partially purified enzyme was done for molecular weight determination and activity and stability under varying conditions of pH, temperature, and in presence of organic solvents, inhibitors, and metal ions. The psychrotolerant bacterium was identified as Pseudomonas palleroniana following 16S rRNA gene sequencing. Maximum lipase production by GBPI_508 was recorded in 7?days at 25?°C utilizing yeast extract as nitrogen source and olive oil as substrate in the lipase production medium. Triton X-100 (1%) in the medium as emulsifier significantly enhanced the lipase production. Lipase produced by bacterium showed aggregation which was confirmed by dynamic light scattering and native PAGE. SDS-PAGE followed by zymogram analysis of partially purified enzyme showed two active bands of ～50?kDa and ～54?kDa. Optimum activity of partially purified enzymatic preparation was recorded at 40?°C while the activity remained nearly consistent from pH 7.0 to 12.0, whereas, maximum stability was recorded at pH values 7.0 and 11.0 at 25?°C. Interestingly, lipase in the partially purified fraction retained 60% enzyme activity at 10?°C. Medium chain pNP ester (C10) was the most preferred substrate for the lipase of GBPI_508. The lipase possessed >50% residual activity when incubated with different organic solvents (25% v/v) except toluene and dichloromethane which inhibited the activity below 50%. Partially purified enzyme was also stable in the presence of metal ions and inhibitors. The study suggests applicability of GBPI_508 lipase in low temperature conditions such as cold-active detergent formulations and cold bioremediation.     

Parameter optimization for thermostable lipase production and performance evaluation as prospective detergent additive

Abstract

Lipase based formulations has been a rising interest to laundry detergent industry for their eco-friendly property over phosphate-based counterparts and compatibility with chemical detergents ingredients. A thermo-stable Anoxybacillus sp. ARS-1 isolated from Taptapani Hotspring, India was characterized for optimum lipase production employing statistical model central composite design (CCD) under four independent variables (temperature, pH, % moisture and bio-surfactant) by solid substrate fermentation (SSF) using mustard cake. The output was utilized to find the effect of parameters and their interaction employing response surface methodology (RSM). A quadratic regression with R²?=?0.955 established the model to be statically best fitting and a predicted highest lipase production of 29.4?IU/g at an optimum temperature of 57.5?°C, pH 8.31, moisture 50% and 1.2?mg of bio-surfactant. Experimental production of 30.3?IU/g lipase at above conditions validated the fitness of model. Anoxybacillus sp. ARS-1 produced lipase was found to resist almost all chemical detergents as well as common laundry detergent, proving it to be a prospective additive for incorporation.     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Production of bacterial cellulose from Komagataeibacter saccharivorans strain BC1 isolated from rotten green grapes

Abstract

Bacterial cellulose (BC) is one of the prominent biopolymers that has been acquiring attention currently due to its distinctive properties and applications in various fields. The current work presents the isolation of Komagataeibacter saccharivorans strain BC1 isolated from rotten green grapes, followed by biochemical and genotypic characterization, which confirmed that the strain is capable of synthesizing cellulose. Further, production media was designed and certain variables such as carbon, nitrogen sources, pH, and temperature were optimized in order to obtain the maximum concentration of cellulose production. We found mannitol to be the ideal carbon source and yeast extract as the ideal nitrogen source with a highest BC dry yield of 1.81?±?0.25?g/100?mL at pH 5.76 for a week at 30?°C.The charcterization of pellicles by FTIR spectrum depicted similar functional groups present in synthesized BC as that of the commercial cellulose. X-ray diffraction revealed that BC showed 82% crystallinity. Surface morphology of the dried pellicle was studied by SEM image which showed that the BC surface was tightly packed with thin fibers with less porosity. Hence the study demonstrates that the isolates of K.saccharivorans could be used to produce a biopolymer in a short period of time using a modified production medium.     

Extracellular cold-active lipase of Microbacterium luteolum isolated from Gangotri glacier,western Himalaya: Isolation,partial purification and characterization

A psychrophilic bacterium producing cold-active lipase upon growth at low temperature was isolated from the soil samples of Gangotri glacier and identified as Microbacterium luteolum. The bacterial strain produced maximum lipase at 15 °C, at a pH of 8.0. Beef extract served as the best organic nitrogen source and ammonium nitrate as inorganic for maximum lipase production. Castor oil served as an inducer and glucose served as an additional carbon source for production of cold-active lipase. Ferric chloride as additional mineral salt in the medium, highly influenced the lipase production with an activity of 8.01 U ml^?1. The cold-active lipase was purified to 35.64-fold by DEAE-cellulose column chromatography. It showed maximum activity at 5 °C and thermostability up to 35 °C. The purified lipase was stable between pH 5 and 9 and the optimal pH for enzymatic hydrolysis was 8.0. Lipase activity was stimulated in presence of all the solvents (5%) tested except with acetonitrile. Lipase activity was inhibited in presence of Mn²⁺, Cu²⁺, and Hg²⁺; whereas Fe⁺, Na⁺ did not have any inhibitory effect on the enzyme activity. The purified lipase was stable in the presence of SDS; however, EDTA and dithiothreitol inhibited enzyme activity. Presence of Ca²⁺ along with inhibitors stabilized lipase activity. The cold active lipase thus exhibiting activity and stability at a low temperature and alkaline pH appears to be practically useful in industrial applications especially in detergent formulations.     

Screening of filamentous fungi for lipase production: Hypocrea pseudokoningii a new producer with a high biotechnological potential

Abstract

Filamentous fungi isolated from soil samples were screened for extracellular lipase production. The best producer was Hypocrea pseudokoningii identified by taxonomical criteria, and by rDNA sequencing of the variable internal transcribed spacers (ITS I and II) and the intervening 5.8S gene. The fungus was grown in a complex medium supplemented with 1% Tween 80 and 0.2% yeast extract, for 4 days. The optimum pH for extracellular and intracellular lipases was 7.0 and 8.0, respectively. Both enzymes exhibited maximum activity at 40°C. Extracellular and intracellular lipase activities were highly stable in the pH range 3.0–8.0 at room temperature. The intracellular lipase was thermostable up to 60°C, for 15 min and the extracellular, for 107 min, at the same temperature. The intracellular lipase was stimulated by silver ions. Extracellular lipase was stable in organic solvents, such as DMSO, alcohols, acetone, and acetonitrile, for 24 hours. Lipase activity increased around 80% when detergents were added to the enzymatic assay, such as Tween 80, Triton X-100, and SDS.     

Extracellular solvent stable cold-active lipase from psychrotrophic Bacillus sphaericus MTCC 7526: partial purification and characterization

Psychrotropic Bacillus sphaericus producing solvent stable cold-active lipase upon growth at low temperature was isolated from Gangotri glacier. Optimal parameters for lipase production were investigated and the strain was able to produce lipase even at 15 °C. An incubation period of 48 h and pH 8 was found to be conducive for cold-active lipase production. The addition of trybutyrin as substrate and lactose as additional carbon source increased lipase production. The enzyme was purified up to 17.74-fold by ammonium sulphate precipitation followed by DEAE cellulose column chromatography. The optimum temperature and pH for lipase activity were found to be 15 °C and 8.0, respectively. The lipase was found to be stable in the temperature range 20–30 °C and the pH range 6.0–9.0. The protein retained more than 83 % of its initial activity after exposure to organic solvents. The lipase exhibited significant stability in presence of acetone and DMSO retaining >90 % activity. The enzyme activity was inhibited by 10 mM CuSO₄ and EDTA but showed no loss in activity after incubation with other metals or inhibitors examined in this study.     

Production and properties of an alkaline,thermophilic lipase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> NS2W

Eighteen bacterial strains were isolated from soil samples and screened for alkaline, thermophilic lipase production. Pseudomonas fluorescens NS2W was selected and its production of lipase was optimized in shake flasks using a statistical experimental design. Cell growth and lipase production were studied in shake flasks and in a 1-l fermenter in the optimized medium. Maximum lipase yields were 69.7 and 68.7 U ml⁻¹, respectively. The optimized medium resulted in about a five-fold increase in the enzyme production, compared to that obtained in the basal medium. The lipase had an optimal activity at pH 9.0 and was stable over a wide pH range of 3–11 with more than 70% activity retention. The lipase had an optimal activity at 55°C and was stable up to 60°C with more than 70% activity retention for at least 2 h. Journal of Industrial Microbiology & Biotechnology (2002) 28, 344–348 DOI: 10.1038/sj/jim/7000254 Received 06 September 2001/ Accepted in revised form 15 March 2002     

Production and Properties of Lipase from a Newly Isolated Chromobacterium

Out of some 750 strains of microorganisms, a potent bacterium for lipase production was isolated from soil and was identified as Chromobacterium viscosum.

The bacterium accumulates lipase in culture fluid when grown aerobically at 26°C for 3 days in a medium composed of soluble starch, soy bean meal, lard and inorganic salts.

Chromobacterium lipase had an optimum pH of 7.0 for activity at 37°C, and an optimal temperature of 65°C at pH 7.0. The enzyme retained 80% of the activity when heated for 10 min at 70°C. This lipase was capable of hydrolyzing a variety of natural fats and oils, and it was more active on lard and butter than on olive oil. The activity was stimulated by Ca²⁺, Mg²⁺, Mn²⁺ and inhibited by Cu²⁺, Hg²⁺ and Sn²⁺. It was not diminished but rather stimulated by a high concentration of bile-salts.     

Influence of cultivation conditions on the production of a thermostable extracellular lipase from Amycolatopsis mediterranei DSM 43304

Among several lipase-producing actinomycete strains screened, Amycolatopsis mediterranei DSM 43304 was found to produce a thermostable, extracellular lipase. Culture conditions and nutrient source modification studies involving carbon sources, nitrogen sources, incubation temperature and medium pH were carried out. Lipase activity of 1.37 ± 0.103 IU/ml of culture medium was obtained in 96 h at 28°C and pH 7.5 using linseed oil and fructose as carbon sources and a combination of phytone peptone and yeast extract (5:1) as nitrogen sources. Under optimal culture conditions, the lipase activity was enhanced 12-fold with a twofold increase in lipase specific activity. The lipase showed maximum activity at 60°C and pH 8.0. The enzyme was stable between pH 5.0 and 9.0 and temperatures up to 60°C. Lipase activity was significantly enhanced by Fe³⁺ and strongly inhibited by Hg²⁺. Li⁺, Mg²⁺ and PMSF significantly reduced lipase activity, whereas other metal ions and effectors had no significant effect at 0.01 M concentration. A. mediterranei DSM 43304 lipase exhibited remarkable stability in the presence of a wide range of organic solvents at 25% (v/v) concentration for 24 h. These features render this novel lipase attractive for potential biotechnological applications in organic synthesis reactions.     

Fermentative production of extracellular amylase from novel amylase producer,Tuber maculatum mycelium,and its characterization

Abstract

Truffles are symbiotic hypogeous edible fungi (form of mushroom) that form filamentous mycelia in their initial phase of the growth cycle as well as a symbiotic association with host plant roots. In the present study, Tuber maculatum mycelia were isolated and tested for extracellular amylase production at different pH on solid agar medium. Furthermore, the mycelium was subjected to submerged fermentation for amylase production under different culture conditions such as variable carbon sources and their concentrations, initial medium pH, and incubation time. The optimized conditions after the experiments included soluble starch (0.5% w/v), initial medium pH of 7.0, and incubation time of 7 days, at room temperature (22?±?2?°C) under static conditions which resulted in 1.41?U/mL of amylase. The amylase thus obtained was further characterized for its biocatalytic properties and found to have an optimum activity at pH 5.0 and a temperature of 50?°C. The enzyme showed good thermostability at 50?°C by retaining 98% of the maximal activity after 100?min of incubation. The amylase activity was marginally enhanced in presence of Cu²⁺ and Na⁺ and slightly reduced by K⁺, Ca²⁺, Fe²⁺, Mg²⁺, Co²⁺, Zn²⁺, and Mn²⁺ ions at 1?mM concentration.     

Production of xylanase by Aspergilli using alternative carbon sources: application of the crude extract on cellulose pulp biobleaching

The ability of xylanolytic enzymes produced by Aspergillus fumigatus RP04 and Aspergillus niveus RP05 to promote the biobleaching of cellulose pulp was investigated. Both fungi grew for 4–5 days in liquid medium at 40°C, under static conditions. Xylanase production was tested using different carbon sources, including some types of xylans. A. fumigatus produced high levels of xylanase on agricultural residues (corncob or wheat bran), whereas A. niveus produced more xylanase on birchwood xylan. The optimum temperature of the xylanases from A. fumigatus and A. niveus was around 60–70°C. The enzymes were stable for 30 min at 60°C, maintaining 95–98% of the initial activity. After 1 h at this temperature, the xylanase from A. niveus still retained 85% of initial activity, while the xylanase from A. fumigatus was only 40% active. The pH optimum of the xylanases was acidic (4.5–5.5). The pH stability for the xylanase from A. fumigatus was higher at pH 6.0–8.0, while the enzyme from A. niveus was more stable at pH 4.5–6.5. Crude enzymatic extracts were used to clarify cellulose pulp and the best result was obtained with the A. niveus preparation, showing kappa efficiency around 39.6% as compared to only 11.7% for that of A. fumigatus.     

A unique thermostable and organic solvent tolerant lipase from newly isolated <Emphasis Type="Italic">Aneurinibacillus thermoaerophilus</Emphasis> strain HZ: physical factor studies

A newly isolated thermophilic bacterium, Aneurinibacillus thermoaerophilus strain HZ, from a hot spring recreational area (Sungai Kelah, Malaysia), showed an extracellular lipase activity. It was identified based on 16S rRNA sequencing, where phylogenetic analysis revealed its homology to Aneurinibacillus thermoaerophilus. The strain produced a lipase that was stable in various organic solvents such as dimethyl sulfoxide, toluene, p-xylene, and hexane. In order to increase lipase production, optimization of physical factors which affected the growth and lipase production was studied. The optimal growth was obtained at 50°C and pH 8.0; while the maximal lipase production was achieved in the logarithmic decline phase at 60°C and pH 7.5 with 7% starting inoculum and 150 rev/min shaking rate for 48 h incubation.     

Production of highly active fungal milk-clotting enzyme by solid-state fermentation

Abstract

Cheese production is projected to reach 20 million metric tons by 2020, of which 33% is being produced using calf rennet (EC 3.4.23.4). There is shortage of calf rennet, and use of plant and microbial rennets, hydrolyze milk proteins non-specifically resulting in low curd yields. This study reports fungal enzymes obtained from cost effective medium, with minimal down streaming, whose activity is comparable with calf and Mucor rennet. Of the fifteen fungi that were screened, Mucor thermohyalospora (MTCC 1384) and Rhizopus azygosporus (MTCC 10195) exhibited the highest milk-clotting activity (MCA) of 18,383?±?486?U/ml and 16,373?± 558?U/ml, respectively. Optimization exhibited a 33% increase in enzyme production (30?g wheat bran containing 6% defatted soy meal at 30?°C, pH 7) for M. thermohyalospora. The enzyme was active from pH 5–10 and temperature 45–55?°C. Rhizopus azygosporus exhibited 31% increase in enzyme production (30?g wheat bran containing 4% defatted soy meal at 30?°C, pH 6) and the enzyme was active from pH 6–9 at 50?°C. Curd yields prepared from fungal enzyme extract decreased (5–9%), when compared with calf rennet and Mucor rennet. This study describes the potential of fungal enzymes, hitherto unreported, as a viable alternative to calf rennet     

Biocatalytic potential of lipase from Staphylococcus sp. MS1 for transesterification of jatropha oil into fatty acid methyl esters

An extracellular lipase producing isolate Staphylococcus sp. MS1 was optimized for lipase production and its biocatalytic potential was assessed. Medium with tributyrin (0.25 %) and without any exogenous inorganic nitrogen source was found to be optimum for lipase production from Staphylococcus sp. MS1. The optimum pH and temperature for lipase production were found to be pH 7 and 37 °C respectively, showing lipase activity of 37.91 U. It showed good lipase production at pH 6–8. The lipase was found to be stable in organic solvents like hexane and petroleum ether, showing 98 and 88 % residual activity respectively. The biotransformation using the concentrated enzyme in petroleum ether resulted in the synthesis of fatty acid methyl esters like methyl oleate, methyl palmitate and methyl stearate. Thus, the lipase under study has got the potential to bring about transesterification of oils into methyl esters which can be exploited for various biotechnological applications.     

Temperature-dependent phosphate solubilization by cold- and pH-tolerant species of Aspergillus isolated from Himalayan soil

Ten species of Aspergillus isolated from soil samples collected from different locations in the Indian Himalayan region have been studied for their growth requirements and tricalcium phosphate solubilization at different temperatures. The Aspergillus species could grow at low temperature and tolerated a wide range of pH. Phosphate solubilization by various Aspergillus species ranged between 374 μg/ml (A. candidus) to 1394 μg/ml (A. niger) at 28°C, 33 μg/ml (A. fumigatus) to 2354 μg/ml (A. niger) at 21°C, 93 μg/ml (A. fumigatus) to 1452 μg/ml (A. niger) at 14°C, and 21 μg/ml (A. wentii) to 83 μg/ml (A. niger) at 9°C. At 21 and 28°C, phosphate solubilization showed a decrease within 4 weeks of incubation, whereas at 9°C and 14°C, it continued further up to 6 weeks of incubation. In general, phosphate solubilization by different Aspergillus species was recorded at a maximum of 28°C or 21°C; biomass production was favored at 21°C or 14°C. Conversely, A. nidulans and A. sydowii exhibited maximum phosphate solubilization at 14°C and produced maximum biomass at 21°C. Data suggest that suboptimal conditions (higher or lower temperature) for fungal growth and biomass production were optimal for the production of metabolites involved in phosphate solubilization. Significant negative correlations were obtained between pH and phosphate solubilization for eight species at 28°C, for seven at 21°C, and for nine at 14°C. Extracellular phosphatase activity was exhibited only in case of A. niger, whreas intracellular phosphatase activity was detected in all species, the maximum being in A. niger. Statistically significant positive or negative correlations were obtained between phosphate solubilization and other parameters in most cases at different temperatures.     

Cellulase from Bacillus licheniformis and Brucella sp. isolated from mangrove soils of Mahanadi river delta,Odisha, India

In the present study, two cellulose-degrading bacteria (CDB-5 and CDB-12) were isolated from mangrove soils of Mahanadi river delta, based on halo zone formation in Congo red agar medium and evaluation for cellulase production in CMC broth medium. Based on morphological, biochemical and 16S rRNA gene sequencing, the two strains, CDB-5 and CDB-12, were identified as Brucella sp. and Bacillus licheniformis, respectively. The gene bank accession number of the strains CDB-5 and CDB-12 are KR632646 and KR632645, respectively. The strain Brucella sp. and B. licheniformis showed an enzyme activity of 96.37?U/ml and 98.25?U/ml, respectively, after 72?h of incubation period. Enzyme production was optimized under different growth conditions such as pH, temperature, agitation rate, carbon source, sodium chloride (NaCl), and nitrogen sources. Maximum cellulase production by both the strains was obtained in the same parameter condition such as pH (7.0), rpm (150), and NaCl (2%, w/v) which varies for other parameters. The strain, CDB-5, produced maximum cellulase at 35?°C temperature, maltose as a carbon source, and yeast extract as a nitrogen source where as the strain CDB-12 produces maximum cellulase at 45?°C temperature, carboxyl methyl cellulose (CMC) as carbon source and trypton as a nitrogen source. The bacterial crude enzyme was purified by ammonium sulfate precipitation followed by overnight dialysis. SDS-PAGE analysis of the partially purified cellulase enzyme exhibited band sizes of approximately 55 and 72?kDa.     

Production,optimization, purification,characterization, and anti-cancer application of extracellular L-glutaminase produced from the marine bacterial isolate

Abstract

L-glutaminase from bacterial sources has been proven to be effective and economical agents in cancer therapy, food industry and high-value chemicals like threonine. In the present study, a newly isolated bacterial strain was potentially producing extracellular L-glutaminase, it identified as Bacillus subtilis OHEM11 (MK389501) using the 16S rRNA gene. L-glutaminase production optimized and the optimum factors for production under submerged fermentation were at pH 6.5–7.0 and 35?°C after 28?hr using rhamnose and glutamine as carbon and nitrogen sources, respectively, while bagasse was the best inducer for the production under solid-state fermentation. Ethanol precipitation and ion-exchange chromatography using QFF are the purification steps. L-glutaminase was purified to 2-fold with specific activity 89.78?U/mg and its molecular weight about 54.8?kDa with the alkaline property of the enzyme makes it clear having carcinostatic property; maximum enzyme activity at pH 8.2 and 40?°C and retained about 90% activity for 1?hr. The cytotoxicity effect of L-glutaminase indicated a significant safety on Vero cells with high anticancer activity against NFS-60, HepG-2, and MCF-7 cancer cell lines. The outcomes demonstrated that L-glutaminase could be applied in many biotechnological applications such as pharmaceutical and food processing.     

Production of an alkaline protease using Bacillus pumilus D3 without inactivation by SDS,its characterization and purification

Abstract

In this study, protease-producing capacity of Bacillus pumilus D3, isolated from hydrocarbon contaminated soil, was evaluated and optimized. Optimum growing conditions for B. pumilus D3 in terms of protease production were determined as 1% optimum inoculum size, 35?°C temperature, 11 pH and 48?h incubation time, respectively. Stability studies indicated that the mentioned protease was stable within the pH range of 7–10.5 and between 30?°C and 40?°C temperatures. Surprisingly, the activity of the enzyme increased in the presence of SDS with concentration up to 5?mM. The protease was concentrated 1.6-fold with ammonium sulfate precipitation and dialysis. At least six protein bands were obtained from dialysate by electrophoresis. Four clear protein bands with caseinolytic activity were detected by zymography. Dialysate was further purified by anion-exchange chromatography and the caseinolytic active fraction showed a single band between 29 and 36?kDa of reducing conditions.     

Production of a Thermostable Lipase by Humicola lanuginosa Grown on Sorbitol-Corn Steep Liquor Medium

For thermostable lipase production by Humicola lanuginosa No. 3, a simple optimized medium consisting of (%, w/v): sorbitol, 1.0; corn steep liquor, 1.0; NaCl, 0.5; CaCl₂–2H₂0, 0.01; Silicone Km-70 (antifoamer), 0.2; and whale oil or castor oil as a lipase inducer, 0.3, was used. The yield of the lipase was about 80 — 120U/ml after 25 hr aerobic cultivation at 45°C when the pH was maintained at 7 to 8. The acetone powder preparation of the enzyme was most active at pH 7.0 and 45°C. The enzyme retained 100% activity on incubation for 20 hr at 60°C. The enzyme was able to hydrolyze almost all forms of natural fats tested (14 kinds), coconut oil being the most rapidly hydrolyzed.