Morphological, biochemical and kinetic properties of lipase from Candida rugosa immobilized in zirconium phosphate

Zirconium phosphate (ZrP), a low-cost inorganic material with well-defined physicochemical properties, was successfully used as support for immobilizing Candida rugosa lipase by covalent bonding. The immobilized derivative showed high catalytic activity in both aqueous and non-aqueous media. Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy measurements demonstrated that the ZrP fulfilled the morphological requirements for use as a matrix for immobilizing lipases. The free and immobilized lipases were compared in terms of pH, temperature and thermal stability. The immobilized lipase had a higher pH optimum (7.5) and higher optimum temperature (50°C) than the free lipase. Immobilization also increased the thermal stability. The hydrolysis of p-nitrophenyl palmitate (pNPP) by immobilized lipase, examined at 37°C, followed Michaelis-Menten kinetics. Values for K_m=1.18 µM and V_max=325Umg^-1 indicated that the immobilized system was subject to mass transfer limitations. The immobilized derivative was also tested under repetitive reaction batches in both ester hydrolysis and synthesis.     

Recombinant lipase from Candida rugosa for regioselective hydrolysis of peracetylated nucleosides. A comparison with commercial non-recombinant lipases

Abstract

Commercial lipases from the yeast Candida rugosa have been compared with two recombinant C. rugosa lipases, rCRL1 and rCRL1lid3, with respect to their immobilization and exploitation in biotransformations aimed at the synthesis of pyrimidine nucleosides. Immobilization on octyl-agarose and decaoctyl-Sepabeads but not on Eupergit^® C gave comparable results to commercial lipases for rCRL1, while only a low percentage (12%) of rCRL1lid3 was efficiently immobilized. When immobilized on decaoctyl-Sepabeads, rCRL1 showed a markedly higher stability to chemical inactivation, since it could maintain 100% activity after 180 h incubation in 30% (v/v) acetonitrile. Hydrolysis of peracylated uridine and cytidine and their fluorinated counterparts proceeded with high regioselectivity and good yield, and even improved when rCRL1 was immobilized on decaoctyl-Sepabeads.     

Production of omega-3 polyunsaturated fatty acids through hydrolysis of fish oil by Candida rugosa lipase immobilized and stabilized on different supports

This paper describes the fish oil hydrolysis performed to obtain Omega-3 fatty acids using Candida rugosa lipase (CRL) immobilized and stabilized on different supports. The enzyme was successfully immobilized, presenting higher thermal stability than the free enzyme. Besides, the cationic derivatives were more stable than the others derivatives and free enzyme in methanol, propanol and cyclohexane. Reactions of fish oil hydrolysis were carried out in organic aqueous medium using 10?U of biocatalyst per gram of oil, at 37?°C. After 96?h, the CRL immobilized on cyanogen bromide agarose rendered the lower fish oil hydrolysis, producing 218?μM of Omega-3, which was 1.1-fold more than the hydrolysis catalyzed by free enzyme, while the ionic derivatives rendered the highest fish oil hydrolysis producing 582 and 577?μM of Omega-3 using the carboxymethyl and sulfopropyl derivatives, respectively. The carboxymethyl and the sulfopropyl derivatives resulted in a 2.9-fold increase in the hydrolysis of fish oil, making these derivatives attractive for industrial applications.     

Covalent immobilization of lipase from Candida rugosa onto poly(acrylonitrile-co-2-hydroxyethyl methacrylate) electrospun fibrous membranes for potential bioreactor application

A simple way of fabricating enzymatic membrane reactor with high enzyme loading and activity retention from the conjugation between nanofibrous membrane and lipase was devised. Poly(acrylonitrile-co-2-hydroxyethyl methacrylate) (PANCHEMA) was electrospun into fibrous membrane and used as support for enzyme immobilization. The hydroxyl groups on the fibrous membrane surface were activated with epichlorohydrin, cyanuric chloride or p-benzoquinone, respectively. Lipase from Candida rugosa was covalently immobilized on these fibrous membranes. The resulted bioactive fibrous membranes were examined in catalytic efficiency and activity for hydrolysis. The observed enzyme loading on the fibrous membrane with fiber diameter of 80–150 nm was up to 1.6% (wt/wt), which was as thrice as that on the fibrous membrane with fiber diameter of 800–1000 nm. Activity retention for the immobilized lipase varied between 32.5% and 40.6% with the activation methods of hydroxyl groups. Stabilities of the immobilized lipase were obviously improved. In addition, continuous hydrolysis was carried out with an enzyme-immobilized fibrous membrane bioreactor and a steady hydrolysis conversion (3.6%) was obtained at a 0.23 mL/min flow rate under optimum condition.     

Enhanced activity and enantioselectivity of Candida rugosa lipase immobilized on macroporous adsorptive resins for ibuprofen resolution

The lipase from Candida rugosa was immobilized on three commercially available macroporous adsorptive resins for kinetic resolution of ibuprofen. One resin, CRB02, increased the enzyme activity by 50% to 0.027 g g(-1) min(-1). The deactivation constant (0.19 h(-1)) of the immobilized enzyme was half of that of the native enzyme and the enantioselectivity (E = 29.2) of the immobilized lipase was 2.2 times as much as that of the native lipase for the kinetic resolution of ibuprofen with 1-propanol in isooctane at 30 degrees C.     

Production of Ethyl Butyrate by Candida rugosa Lipase Immobilized in Polyurethane

The enzymatic production of ethyl butyrate was studied: the lipase of Candida rugosa (E.C. 3.1.1.3.) was immobilized in a polyurethane matrix and subsequently introduced in an organic medium containing the substrates in appropriate concentrations. The large majority of experiments was carried out in n-hexane. Two further solvents were tested, namely n-heptane and n-dodecane. The partition coefficients matrix/solvent were estimated for the various solvent systems. The initial esterification rate, the molar yield ester/acid and the degree of conversion were found to be solvent independent when the reaction media were designed so that similar concentrations were created in the microenvironment. Initial rate experiments indicated that in n-hexane the threshold of inhibitory substrate concentrations lies (i) between 0.40 M and 0.50 M for butyric acid, according to the purity of the enzyme preparation and (ii) at 0.30 M for ethanol. Batch operational stability tests indicate that no enzyme deactivation occurs after 20 consecutive batches.     

Studies of reaction parameters on synthesis of Citronellyl laurate ester via immobilized Candida rugosa lipase in organic media

Immobilized Candida rugosa lipase was used for the synthesis of citronellyl laurate from citronellol and lauric acid. Screening of different types of support (Amberlite MB-1 and Celite) for immobilization of lipase and solvent (n-hexane, n-heptane, and iso-octane) and optimization of reaction conditions, such as catalyst loading, effect of substrates molar ratio and temperature, have been studied. The maximum enzyme activity was obtained at 310 K. The immobilized C. rugosa lipase onto Amberlite MB-1 support was found to be the best support with a conversion of 89% of citronellyl laurate ester in iso-octane compared to Celite 545. Deactivation of C. rugosa lipase at 313, 318 and 323 K were observed. Ordered bi bi mechanism with dead end complex of lauric acid was found to fit the initial rate data and the kinetic parameters were obtained by non-linear regression analysis.     

Effect of different carbon sources on lipase production by Candida rugosa

Different carbon sources affecting growth and lipase production in Candida rugosa were studied by using batch cultures on defined medium. Carbohydrates and acids non-related to fats did not induce lipase production. The highest yields of enzyme were obtained with lipids or fatty acids as carbon sources. Tween 80 stimulated lipase biosynthesis and secretion outside the cell. Combinations of two types of substrates, carbohydrates and fatty acids, did not improve lipase production, and in some cases, their consumption was produced in a sequential pattern. Glucose presented a repressing effect on lipase production. Moreover, glucose was found to be effective in stimulating lipase secretion by cells with a high level of cell-bound lipase activity because of their previous growth in oleic acid.     

Amino silicones finished fabrics for lipase immobilization: Fabrics finishing and catalytic performance of immobilized lipase

Finishing of silk fabric was achieved by using amino-functional polydimethylsiloxane (PDMS) and lipase from Candida sp. 99-125 was immobilized on the treated silk fabrics. Hydrophobic fabrics were obtained by dipping the native fabric in 0.125–0.25% (w/v) PDMS solution and dried at 70 °C. The direct adsorption on PDMS-treated fabric was verified to be a better strategy for lipase immobilization than that by covalent binding. Compared to unfinished fabrics, the hydrolytic activity of immobilized enzyme on the finished fabric was improved by 1.6 times. Moreover, the activity of immobilized enzymes on hydrophobic fabrics was significantly improved in different concentrations of strong polar solvents such as methanol and ethanol, and in common organic solvents with different octanol–water partition coefficients (Log P). Enzymatic activity and stability in 15% water content system (added water accounted for the total reaction mixtures, v/v) showed more than 30% improvement in each batch. The amino–silicone finished fabric surface was investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. The hydrophobic fabric immobilized enzyme could be recycled for more than 80 times with no significant decrease in esterification activity. PDMS-treated woven silk fabrics could be a potential support for lipase immobilization in catalytic esterification processes.     

Structure and dynamics of Candida rugosa lipase: the role of organic solvent

The effect of organic solvent on the structure and dynamics of proteins was investigated by multiple molecular dynamics simulations (1 ns each) of Candida rugosa lipase in water and in carbon tetrachloride. The choice of solvent had only a minor structural effect. For both solvents the open and the closed conformation of the lipase were near to their experimental X-ray structures (C rms deviation 1–1.3 Å). However, the solvents had a highly specific effect on the flexibility of solvent-exposed side chains: polar side chains were more flexible in water, but less flexible in organic solvent. In contrast, hydrophobic residues were more flexible in organic solvent, but less flexible in water. As a major effect solvent changed the dynamics of the lid, a mobile element involved in activation of the lipase, which fluctuated as a rigid body about its average position. While in water the deviations were about 1.6 Å, organic solvent reduced flexibility to 0.9 Å. This increase rigidity was caused by two salt bridges (Lys85–Asp284, Lys75–Asp79) and a stable hydrogen bond (Lys75–Asn 292) in organic solvent. Thus, organic solvents stabilize the lid but render the side chains in the hydrophobic substrate-binding site more mobile. Figure Superimposition of open (black, PDB entry 1CRL) and closed (gray, PDB entry 1TRH) conformers of C. rugosa lipase. The mobile lid is indicatedThis revised version was published online in October 2004 with corrections to the Graphical Abstract.     

Immobilization of Candida rugosa lipase in lyotropic liquid crystals and some properties of the immobilized enzyme

Summary Lipase from Candida rugosa has been immobilized in lyotropic liquid crystals consisting of a nonionic surfactant, hexane, and aqueous buffer with the enzyme. The kinetics of butyl butyrate synthesis, diffusion effects, and enzyme stability were investigated. Some basic rules have been formulated for a rational medium design in liquid-crystalline matrices.     

Biodiesel production from pomace oil by using lipase immobilized onto olive pomace

In the present work, microbial lipase from Thermomyces lanuginosus was immobilized by covalent binding onto olive pomace. Immobilized support material used to produce biodiesel with pomace oil and methanol. The properties of the support and immobilized derivative were evaluated by scanning electron microscopy (SEM). The maximum immobilization of T. lanuginosus was obtained as 18.67 mg/g support and the highest specific activity was 10.31 U/mg protein. The properties of immobilized lipase were studied. The effects of protein concentration, pH and buffer concentration on the immobilization and lipase activity were investigated. Biodiesel production using the immobilized lipase was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 93% at 25 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

Hydrolysis of rice bran oil using an immobilized lipase from Candida rugosa in isooctane

The kinetics of enzymatic hydrolysis of rice bran oil in isooctane by immobilized Candida rugosa lipase in a batch reactor showed competitive inhibition by isooctane with a dissociation constant, K1, of 0.92 M. Continuous hydrolysis of rice bran oil was performed in recycling, packed bed reactor with 4352 U of immobilized lipase; the optimum recycle ratio was 9 and the operational half-life was 360 h without isooctane but 288 h with 25% (v/v) isooctane in rice bran oil.     

Improvement of catalytic activity of Candida rugosa lipase in the presence of calix[4]arene bearing iminodicarboxylic/phosphonic acid complexes modified iron oxide nanoparticles

In the present study, iron oxide magnetite nanoparticles, prepared through a co-precipitation method, were coated with phosphonic acid or iminodicarboxylic acid derivatives of calix[4]arene to modulate their surfaces with different acidic groups. Candida rugosa lipase was then directly immobilized onto the modified nanoparticles through sol–gel encapsulation. The catalytic activities and enantioselectivities of the two encapsulated lipases in the hydrolysis reaction of (R/S)-naproxen methyl ester and (R/S)-2-phenoxypropionic acid methyl ester were assessed. The results showed that the activity and enantioselectivity of the lipase were improved when the lipase was encapsulated in the presence of calixarene-based additives; the encapsulated lipase with the phosphonic acid derivative of calix[4]arene had an excellent rate of enantioselectivity against the (R/S)-naproxen methyl and (R/S)-2-phenoxypropionic acid methyl esters, with E = 350 and 246, respectively, compared to the free enzyme. The encapsulated lipases (Fe-Calix-N(COOH)) and (Fe-Calix–P) showed good loading ability and little loss of enzyme activity, and the stability of the catalyst was very good; they only lost 6–11% of the enzyme’s activity after five batches.     

Immobilization of Candida rugosa lipase on colloidal gas aphrons (CGAs)

A novel technique for immobilization of Candida rugosa lipase onto anionic colloidal gas aphrons (CGAs) is described. CGAs are spherical microbubbles (10-100 microm) composed of an inner gas core surrounded by a surfactant shell. In this initial study, greater than 80% lipase (w/w) was effectively retained on the CGAs. Leakage of protein from the CGAs and the activity of the adsorbed lipase decreased with increasing enzyme loading; this indicates that multilayers of lipase may be adsorbing onto the CGAs. The CGA-immobilised lipase displayed normal Michaelis-Menten dependence on substrate concentration and also exhibited greater activity than the free enzyme.     

Resolution of 2-octanol via immobilized Pseudomonas sp. lipase in organic medium

Abstract

Pseudomonas sp. lipase (PSL) immobilization was performed using three different protocols. Lipase immobilized on Diaion HP20 (HP20-PSL) exhibited the highest catalytic activity and stability in the kinetic resolution of racemic 2-octanol. The reaction rate of HP20-PSL was approximately 20 times higher than that of free PSL and the residual activities of HP20-PSL and free PSL were respectively 84% and 19% after incubation in the reaction medium for 72 h. A study of the effect of different reaction parameters on HP20-PSL-catalyzed resolution of (R,S)-2octanol showed that the optimal water content of the immobilized matrix and the optimal molar ratio of vinyl acetate to 2-octanol were 60 ± 5% and 2.5:1, respectively. Under the optimized reaction conditions, (S)-2-octanol of high optically purity (enantiomeric excess > 99%) could be recovered at 53% conversion rate, and HP20-PSL could be reused for ten cycles without significant decrease in its activity and enantioselectivity.     

硅藻土固定中性脂肪酶的制备及其性质

以硅藻土为载体,采用吸附法,对脂肪酶进行固定化,研究了固定化条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件：给酶量为33374U/g,固定化温度为35℃,pH值为7.5,时间为4h,此时固定化酶的活力约为5833U/g载体。固定化酶的热稳定性较游离酶有了很大的提高,其在80℃以下能保持80%以上的酶活,而游离酶60℃残余酶活仅为5%。最适反应温度和最适pH值也分别由游离酶的40℃上升至50℃和由7上升到7.5。对固定化中的中性脂肪酶在生物柴油合成中的应用也进行了初步研究。     

Enzymatic synthesis of sialic acid derivative by immobilized lipase from Candida antarctica

The effects of important reaction parameters on the enhancement of sialic acid derivative lipophilic properties through the lipase-catalyzed esterification of N-acetyl neuraminic acid methyl ester are investigated in this study. It is found that the lipase Novozym 435 from Candida antarctica is particularly useful in the preparation of sialic acid methyl ester monononanoate (SAMEMN). The optimum temperature for the SAMEMN synthesis reaction using Novozym 435 is 60 °C, and nonanoic anhydride is found to be the best substrate among all acyl donors. The Novozym 435-catalyzed esterification of N-acetyl neuraminic acid methyl ester gave a maximum yield of 87.7% after 6 h in acetonitrile at 60 °C. Because the novel method developed is simple, yet effective, it could potentially be used industrially for the production of sialic acid derivatives.     

Sequence of the lid affects activity and specificity of Candida rugosa lipase isoenzymes

The fungus Candida rugosa produces multiple lipase isoenzymes (CRLs) with distinct differences in substrate specificity, in particular with regard to selectivity toward the fatty acyl chain length. Moreover, isoform CRL3 displays high activity towards cholesterol esters. Lipase isoenzymes share over 80% sequence identity but diverge in the sequence of the lid, a mobile loop that modulates access to the active site. In the active enzyme conformation, the open lid participates in the substrate-binding site and contributes to substrate recognition. To address the role of the lid in CRL activity and specificity, we substituted the lid sequences from isoenzymes CRL3 and CRL4 in recombinant rCRL1, thus obtaining enzymes differing only in this stretch of residues. Swapping the CRL3 lid was sufficient to confer to CRL1 cholesterol esterase activity. On the other hand, a specific shift in the chain-length specificity was not observed. Chimeric proteins displayed different sensitivity to detergents in the reaction medium.     

镉对固定化小球藻除磷效果的影响

采用人工配制污水进行静态模拟实验,研究了镉对被海藻酸钙凝胶包埋固定的小球藻去除磷能力的影响.结果表明:在各光照及pH条件下,镉对固定化小球藻吸收磷的效果随着实验时间的推移而变化,在实验的第一天时影响最大;总体而言,镉抑制了固定化小球藻的除磷能力,但在某些条件下镉反而提高了藻对磷的吸收;固定化处理减弱了镉对小球藻除磷能力的影响.具体的光照、pH值与镉的影响效果的关系尚待进一步探讨.