Reaction design for evaluation of the substrate range of hydrolases

Biocatalytic acylation reactions involving 24 alcohols, 8 acyl donors and 6 hydrolases were analysed using an original method. The reaction outcome was determined by semi-automated semi-automated solid-phase microextraction and GC/MS (SPME-GC/MS) allowing rapid evaluation of the success rate of each enzyme. Using Candida antarctica Lipase B (CALB), in 36% of the cases (46 reactions) quantitative conversion of the starting alcohol was observed, with an average isolated yield of 96%. The platform was then used to screen other enzymes with the CALB non-reacting substrates, allowing the design and optimisation of some efficient enzymatic reactions. Modification of the odour profile of rose essential oils by enzymatic treatment was also carried out.     

On the nature of ionic liquids and their effects on lipases that catalyze ester synthesis

Free and immobilized lipases from Candida antarctica (CALA and CALB), Thermomyces lanuginosus (TLL) and Rhizomucor miehei (RML) were used as catalysts in the synthesis of butyl propionate by transesterification in reaction media consisting in nine different ionic liquids. Enzyme activities were clearly dependent on the nature of the ions, the results being improving as the alkyl chain length of the imidazolium cation increased, and as a function of the type of anion ([PF₆], [BF₄] or [ethylsulphate]). The best synthetic activity (655.5 U/mg protein at 40 °C) was obtained when free CALB were assayed in the water-miscible IL cocosalkyl pentaethoxy methyl ammonium methosulfate ([CPMA][MS]), and was clearly related with the water content of the medium. The synthetic activity of free CALB in [CPMA][MS] was enhanced with the increase in temperature, while practically no effect was obtained for TLL. The ability of free CALB to synthesize aliphatic esters of different alkyl chain lengths, using different alkyl vinyl esters and 1-alkanols as substrates, was also studied in [CPMA][MS], the best results (4500 U/mg protein) being obtained for the synthesis of hexyl butyrate.     

Biocatalytic synthesis of vitamin A palmitate using immobilized lipase produced by recombinant Pichia pastoris

In this work, the Candida antarctica lipase B (CALB), produced by recombinant Pichia pastoris , was immobilized and used to synthesize vitamin A palmitate by transesterification of vitamin A acetate and palmitic acid in organic solvent. The reaction conditions including the type of solvent, temperature, rotation speed, particle size, and molar ratio between the two substrates were investigated. It turned out that the macroporous resin HPD826 serving as a carrier showed the highest activity (ca. 9200 U g^?1) among all the screened carriers. It was found that the transesterification kinetic of the immobilized CALB followed the ping pong Bi‐Bi mechanism and the reaction product acetic acid inhibited the enzymatic reaction with an inhibition factor of 2.823 mmol L^?1. The conversion ability of the immobilized CALB was 54.3% after 15 cycles. In conclusion, the present work provides a green route for vitamin A palmitate production using immobilized CALB to catalyze the transesterification of vitamin A acetate and palmitic acid.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Kinetic resolution of drug intermediates catalyzed by lipase B from Candida antarctica immobilized on immobead‐350

Novozyme 435, which is a commercial immobilized lipase B from Candida antarctica (CALB), has been proven to be inadequate for the kinetic resolution of rac‐indanyl acetate. As it has been previously described that different immobilization protocols may greatly alter lipase features, in this work, CALB was covalently immobilized on epoxy Immobead‐350 (IB‐350) and on glyoxyl‐agarose to ascertain if better kinetic resolution would result. Afterwards, all CALB biocatalysts were utilized in the hydrolytic resolution of rac‐indanyl acetate and rac‐(chloromethyl)‐2‐(o‐methoxyphenoxy) ethyl acetate. After optimization of the immobilization protocol on IB‐350, its loading capacity was 150 mg protein/g dried support. Furthermore, the CALB‐IB‐350 thermal and solvent stabilities were higher than that of the soluble enzyme (e.g., by a 14‐fold factor at pH 5–70°C and by a 11‐fold factor in dioxane 30%–65°C) and that of the glyoxyl‐agarose‐CALB (e.g., by a 12‐fold factor at pH 10–50°C and by a 21‐fold factor in dioxane 30%–65°C). The CALB‐IB‐350 preparation (with 98% immobilization yield and activity versus p‐nitrophenyl butyrate of 6.26 ± 0.2 U/g) was used in the hydrolysis of rac‐indanyl acetate using a biocatalyst/substrate ratio of 2:1 and a pH value of 7.0 at 30°C for 24 h. The conversion obtained was 48% and the enantiomeric excess of the product (e.e._p) was 97%. These values were much higher than the ones obtained with Novozyme 435, 13% and 26% of conversion and e.e.p, respectively. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:878–889, 2018     

CLEAs of Candida antarctica lipase B (CALB) with a bovine serum albumin (BSA) cofeeder core: Study of their catalytic activity

Highly active CALB cross-linked enzyme aggregates (CLEAs) were synthesized using a layered methodology based on the synthesis of a cross-linked protein cofeeder core over which an external layer of lipase was later cross-linked. The layered CALB CLEAs were characterized in terms of their catalytic activity in three different test reactions: esterification of oleic acid and ethanol in absence of solvents, esterification of oleic acid and heptanol in organic medium, and hydrolysis of triolein in emulsioned medium. The impact of the cross-linker/protein mass ratio on CLEAs activity, and its evolution with storage time were evaluated in the solventless synthesis of ethyloleate. The amount of cross-linker used showed to be a key parameter for the evolution of the catalytic activity of CLEAs during storage. Under the best conditions found, hyperactivated CALB CLEAs with up to 188% of recovered activity in ethyl oleate synthesis were obtained. In terms of hydrolytic activity mature layered CALB CLEAs showed a retained activity of 68%. The assay of dried mature layered CALB CLEAs in heptyl oleate synthesis showed catalytic activities much higher than the one exhibited by free CALB, reaching 1 h-fatty acid conversions of 14% and 2%, respectively. The high catalytic activity shown by layered CALB CLEAs, suggests that they are an interesting alternative specially for the catalysis of fatty acid esterifications in both organic and solventless medium.     

Cross-linked enzyme aggregates of recombinant Candida antarctica lipase B for the efficient synthesis of olvanil,a nonpungent capsaicin analogue

Despite the proven therapeutic role of capsaicin in human health, its usage is still hampered by its high pungency. In this sense, nonpungent capsaicin analogues as olvanil are a feasible alternative to the unpleasant sensations produced by capsaicin while maintaining a similar pharmacological profile. Olvanil can be obtained by a lipase-catalyzed chemoenzymatic process. In the present work, recombinant Candida antarctica lipase B (CALB) was expressed in Pichia pastoris and subsequently immobilized by cross-linked enzyme aggregate (CLEA) methodology for the synthesis of olvanil. The CALB-CLEAs were obtained directly from the fermentation broth of P. pastoris without any purification step in order to assess the role of the contaminant proteins of the crude extract as co-feeders. The CALB-CLEAs were also bioimprinted to enhance the catalytic performance in olvanil synthesis. When CALB was precipitated with isopropanol, the obtained CALB-CLEAs exhibited the highest activity in the synthesis of olvanil, regardless of the glutaraldehyde concentration. The maximum product synthesis was found at 72 hr obtaining 6.8 g L⁻¹ of olvanil with a reaction yield of 16%. When CALB was bioimprinted with olvanil, the synthesis was enhanced 1.3 times, reaching 10.7 g L⁻¹ of olvanil at 72 hr of reaction with a reaction yield of 25%. Scanning electron microscopy images indicated different morphologies of the CLEAs depending on the precipitating agent and the template used for bioimprinting. Recombinant CALB-CLEAs obtained directly from the fermentation broth are a suitable alternative to commercial enzymatic preparations for the synthesis of olvanil in organic medium.     

Development of yeast cells displaying <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase B and their application to ester synthesis reaction

We isolated the lipase B from Candida antarctica CBS 6678 (CALB CBS6678) and successfully constructed CALB-displaying yeast whole-cell biocatalysts using the Flo1p short (FS) anchor system. For the display of CALB on a yeast cell surface, the newly isolated CALB CBS6678 exhibited higher hydrolytic and ester synthesis activities than the well-known CALB, which is registered in GenBank (Z30645). A protease accessibility assay using papain as a protease showed that a large part of CALB, approximately 75%, was localized on an easily accessible part of the yeast cell surface. A comparison of the lipase hydrolytic activities of yeast whole cells displaying only mature CALB (CALB) and those displaying mature CALB with a Pro region (ProCALB) revealed that mature CALB is preferable for yeast cell surface display using the Flo1p anchor system. Lyophilized yeast whole cells displaying CALB were applied to an ester synthesis reaction at 60°C using adipic acid and n-butanol as substrates. The amount of dibutyl adipate (DBA) produced increased with the reaction time until 144 h. This indicated that CALB displayed on the yeast cell surface retained activity under the reaction conditions.     

Expression in Pichia pastoris of Candida antarctica Lipase B and Lipase B Fused to a Cellulose-Binding Domain

Candida antarctica lipase B (CALB) and C. antarctica lipase B fused to a cellulose-binding domain (CBD-CALB) were expressed functionally in the methylotrophic yeast Pichia pastoris. The cellulose-binding domain originates from cellulase A of the anaerobic rumen fungus Neocallimastix patriciarum. The genes were fused to the α-factor secretion signal sequence of Saccharomyces cerevisiae and placed under the control of the alcohol oxidase gene (AOX1) promoter. The recombinant proteins were secreted into the culture medium reaching levels of approximately 25 mg/L. The proteins were purified using hydrophobic interaction chromatography and gel filtration with an overall yield of 69%. Results from endoglycosidase H digestion of the proteins showed that CALB and CBD-CALB were N-glycosylated. The specific hydrolytic activities of recombinant CALB and CBD-CALB were identical to that reported for CALB isolated from its native source. The fusion of the CBD to the lipase resulted in a greatly enhanced binding toward cellulose for CBD-CALB compared with that for CALB.     

Activity and stability of chemically modified Candida antarctica lipase B adsorbed on solid supports

The effect of various covalent chemical modifications on the transesterification activity and stability of adsorbed lipase B from Candida antarctica (CALB) was studied in 2-butanone and o-xylene. CALB species modified with either polyethylene glycol 2000 monomethyl ether (MPEG), polyethylene glycol 300 mono-octyl ether (OPEG) or n-octanol (OCT) were used in combination with a hydrophobic (Accurel) and a hydrophilic (Duolite) support. The thermostabilities of adsorbed CALB in both solvents, and that of free CALB in o-xylene were not influenced by the modifications. In contrast, the thermostability of free CALB in 2-butanone decreased 2.5-fold after MPEG modification and increased 1.5-fold after modification with OPEG and n-octanol, compared to that of native CALB. The activities of the native and modified CALB species were up to 9-fold higher after adsorption onto Accurel than those of the corresponding free enzymes. Adsorption of these enzyme species onto Duolite only resulted in a 2- to 3-fold increase in the activity of OPEG- and OCT-modified CALB. The modified CALB species adsorbed onto Accurel show similar or up to 2-fold lower activities than do native adsorbed CALB species, while 1.5- to 6-fold higher activities were found for modified CALB species adsorbed onto Duolite. We propose that hydrophobic modifiers induce conformational changes of CALB during adsorption on a hydrophobic support whereas all three modifiers protect CALB from structural alterations during adsorption onto a hydrophilic support. Received: 18 March 1999 / Received revision: 21 June 1999 / Accepted: 27 June 1999     

Enzymatic synthesis of ethyl esters from waste oil using mixtures of lipases in a plug‐flow packed‐bed continuous reactor

This work describes the continuous synthesis of ethyl esters via enzymatic catalysis on a packed‐bed continuous reactor, using mixtures of immobilized lipases (combi‐lipases) of Candida antarctica (CALB), Thermomyces lanuginosus (TLL), and Rhizomucor miehei (RML). The influence of the addition of glass beads to the reactor bed, evaluation of the use of different solvents, and flow rate on reaction conditions was studied. All experiments were conducted using the best combination of lipases according to the fatty acid composition of the waste oil (combi‐lipase composition: 40% of TLL, 35% of CALB, and 25% of RML) and soybean oil (combi‐lipase composition: 22.5% of TLL, 50% of CALB, and 27.5% of RML). The best general reaction conditions were found to be using tert‐butanol as solvent, and the flow rate of 0.08 mL min^?1. The combi‐lipase reactors operating at steady state for over 30 days (720 h), kept conversion yields of ～50%, with average productivity of 1.94 g_{ethyl esters} h^?1, regardless of the type of oil in use. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:952–959, 2018     

A lipid-coated lipase as an efficient hydrolytic catalyst in the two-phase aqueous-organic system

The activity of different formulations of Candida antarctica lipase B (CALB), such as crude CALB, purified CALB, purified CALB lyophilized with PEG (CALB + PEG) or oleic acid (CALB + OA), and the commercial formulation Novozym 435, was determined in toluene, carbon tetrachloride, and 1,4-dioxane at various water activities (a(w)). The reaction between vinylacetate and 1-octanol was used as the model reaction and both transesterification (formation of 1-octylacetate) and hydrolytic (formation of acetic acid from vinylacetate) activities were determined. For equal amounts of lipase protein, CALB + PEG (and to a lesser extent CALB + OA) displayed higher activity than that of the other formulations; for instance, in toluene (a(w) < 0.1), it was 260-, 13-, and 1.8-fold more active than crude CALB, purified CALB, and Novozym 435, respectively. Moreover, the transesterification activity of CALB + PEG was of the same order of magnitude (51%) of the activity shown by the enzyme in the hydrolysis of vinylacetate in aqueous buffer. These results suggest that PEG and oleic acid could act as lyoprotectants, preventing the formation of intermolecular interactions during the lyophilization process that might be responsible for protein denaturation. No diffusional limitation was observed for CALB + PEG-catalyzed reactions. Purified CALB, in contrast to the other formulations, showed a marked activity increase (2.1 to 7.8-fold) as a function of a(w) and, in 1,4-dioxane, it was 3.5-fold more active when it was added to the solvent after previous dissolution of the lyophilized powder in water.     

Synthesis of fatty acid ethyl esters with conventional and microwave heating systems using the free lipase B from Candida antarctica

Free Candida antarctica lipase B (Lipozyme, CALB L^®) was used to produce fatty acid ethyl esters (FAEE) from refined soybean oil in solvent-free media using the conventional (CHS) and microwave (MHS) heating systems. Statistical analyses (95% confidence level) for both reaction products, FAEE and free fatty acids (FFA), were performed. An increase in ethanol:oil molar ratio decreased the catalytic performance of CALB L (p?<?.05). The best conditions using the microwave radiation were a molar ratio of ethanol:oil of 3:1, a water content of 20.3?wt.% and an enzyme loading of 3?wt.% and this resulted in a total ester content of 64.7% in 15?min, while the same condition using the conventional heating gave only 21.4%. Moreover, the reaction equilibrium was reached 16 times faster with microwave than with conventional heating. High ethanol:oil molar ratios had a negative effect on FAEE synthesis with both CHS and MHS, probably due to the partial inactivation of the enzymes. MHS improved the reaction performance of CALB L, but other process parameters will have to be optimized to enhance the resulting FAEE yields. The recovery and reuse of CALB L using a MHS was demonstrated. Hence, the use of microwave radiation under the conditions applied in this study was not detrimental to the catalytic performance of CALB L for at least one reuse.     

Candida antarctica lipase B chemically immobilized on epoxy-activated micro- and nanobeads: catalysts for polyester synthesis

Candida antarctica Lipase B (CALB) was covalently immobilized onto epoxy-activated macroporous poly(methyl methacrylate) Amberzyme beads (235 microm particle size, 220 A pore size) and nanoparticles (nanoPSG, diameter 68 nm) with a poly(glycidyl methacrylate) outer region. Amberzyme beads allowed CALB loading up to 0.16 g of enzyme per gram of support. IR microspectroscopy generated images of Amberzyme-CALB beads showed CALB is localized within a 50 microm thick loading front. IR microspectroscopy images, recorded prior to and after treatment of Amberzyme-CALB with DMSO/aqueous Triton X-100, are similar, confirming that CALB is largely chemically linked to Amberzyme. The activity of CALB immobilized on Amberzyme, Lewatit (i.e., Novozym 435 catalyst), and nanoPSG was assessed for lactone ring-opening and step-condensation polymerizations. For example, the percent conversion of -caprolactone using the same amount of enzyme catalyzed by Amberzym-CALB, Novozym 435, and nanoPSG-CALB for 20 min was 7.0, 16, and 65%, respectively. Differences in CALB reactivity were discussed based on resin physical parameters and availability of active sites determined by active site titrations. Regardless of the matrix used and chemical versus physical immobilization, -CL ring-opening polymerizations occur by a chain growth mechanism without chain termination. To test Amberzyme-CALB stability, the catalyst was reused over three reaction cycles for -CL ring-opening polymerization (70 degrees C, 70 min reactions) and glycerol/1,8-octanediol/adipic acid polycondensation reactions (90 degrees C, 64 h). Amberzyme-CALB was found to have far better stability for reuse relative to Novozym 435 for the polycondensation reaction.     

Displaying Candida antarctica lipase B on the cell surface of Aspergillus niger as a potential food-grade whole-cell catalyst

Aspergillus niger is a recognized workhorse used to produce food processing enzymes because of its extraordinarily high protein-producing capacity. We have developed a new cell surface display system de novo in A. niger using expression elements from generally recognized as safe certified microorganisms. Candida antarctica lipase B (CALB), a widely used hydrolase, was fused to an endogenous cell wall mannoprotein, CwpA, and functionally displayed on the cell surface. Localization of CALB was confirmed by enzymatic assay and immunofluorescence analysis using laser scanning confocal microscopy. After induction by maltose for 45 h, the hydrolytic activity and synthesis activity of A. niger mycelium-surface displayed CALB (AN-CALB) reached 400 and 240 U/g dry cell, respectively. AN-CALB was successfully used as a whole-cell catalyst for the enzymatic production of ethyl esters from a series of fatty acids of different chain lengths and ethanol. In a solvent-free system, AN-CALB showed great synthetic activity and afforded high substrate mole conversions, which amounted to 87 % for ethyl hexanoate after 2 h, 89 % for ethyl laurate after 2 h, and 84 % for ethyl stearate after 3 h. These results suggested that CwpA can act as an efficient anchoring motif for displaying enzyme on A. niger, and AN-CALB is a robust, green, and cost-effective alternative food-grade whole-cell catalyst to commercial lipase.     

Kinetic study on the inhibition of xanthine oxidase by acylated derivatives of flavonoids synthesised enzymatically

Studies have reported that flavonoids inhibit xanthine oxidase (XO) activity; however, poor solubility and stability in lipophilic media limit their bioavailability and applications. This study evaluated the kinetic parameters of XO inhibition and partition coefficients of flavonoid esters biosynthesised from hesperidin, naringin, and rutin via enzymatic acylation with hexanoic, octanoic, decanoic, lauric, and oleic acids catalysed by Candida antarctica lipase B (CALB). Quantitative determination by ultra-high performance liquid chromatography–mass spectrometry (UHPLC–MS) showed higher conversion yields (%) for naringin and rutin esters using acyl donors with 8C and 10C. Rutin decanoate had higher partition coefficients (0.95), and naringin octanoate and naringin decanoate showed greater inhibitory effects on XO (IC₅₀ of 110.35 and 117.51?μM, respectively). Kinetic analysis showed significant differences (p?K_m values, whereas the values for V_max were the same, implying the competitive nature of XO inhibition.     

Display of Candida antarctica lipase B on Pichia pastoris and its application to flavor ester synthesis

Two alternative cell-surface display systems were developed in Pichia pastoris using the α-agglutinin and Flo1p (FS) anchor systems, respectively. Both the anchor cell wall proteins were obtained originally from Saccharomyces cerevisiae. Candida antarctica lipase B (CALB) was displayed functionally on the cell surface of P. pastoris using the anchor proteins α-agglutinin and FS. The activity of CALB displayed on P. pastoris was tenfold higher than that of S. cerevisiae. The hydrolytic and synthetic activities of CALB fused with α-agglutinin and FS anchored on P. pastoris were investigated. The hydrolytic activities of both lipases displayed on yeast cells surface were more than 200 U/g dry cell after 120 h of culture (200 and 270 U/g dry cell, respectively). However, the synthetic activity of CALB fused with α-agglutinin on P. pastoris was threefold higher than that of the FS fusion protein when applied to the synthesis of ethyl caproate. Similarly, the CALB displayed on P. pastoris using α-agglutinin had a higher catalytic efficiency with respect to the synthesis of other short-chain flavor esters than that displayed using the FS anchor. Interestingly, for some short-chain esters, the synthetic activity of displaying CALB fused with α-agglutinin on P. pastoris was even higher than that of the commercial CALB Novozyme 435.     

Decarboxylative aldol reaction catalysed by lipases and a protease in organic co-solvent mixtures and nearly anhydrous organic solvent media

Abstract

The effects of the choice of lipase, reaction medium, immobilization, presence of additives and temperature on conversion and stereoselectivity during a lipase catalysed decarboxylative aldol reaction were examined. It was shown that Candida antarctica lipase B (CALB) catalysed a decarboxylative aldol reaction between 4-nitrobenzaldehyde and ethyl acetoacetate in a 60% acetonitrile–40% aqueous buffer co-solvent mixture. Interestingly, free and immobilized forms of CALB showed opposite enantioselectivity in this media. The addition of 30 mol% imidazole increased the reaction rate from 8.5 to 55.7 μM min^??1 mg^??1. A 98% conversion could be achieved in 14 h (instead of 168 h) by adding imidazole. Other lipases also catalysed this reaction in different reaction media to a varying extent. With Mucor javanicus lipase in 30% DMSO, 20% enantiomeric excess (ee) of the (R)-product was observed. CALB also catalysed this reaction in nearly anhydrous acetonitrile. In the presence of cross-linked protein coated microcrystals of CALB, 90% conversion was obtained in this media in 24 h. A commercially available protease, alcalase, was also found to catalyse this reaction. While low water media gave poor conversion, the reaction in aqueous–60% acetonitrile co-solvent mixture gave 99% conversion in 72 h, provided imidazole was used as an additive.     

Production of flavor esters catalyzed by CALB-displaying Pichia pastoris whole-cells in a batch reactor

Candida antarctica lipase B (CALB) has been employed as an efficient catalyst in the preparation of many flavor esters. A CALB-displaying yeast whole-cell biocatalyst could be an attractive alternative to commercial immobilized CALB because of its low-cost preparation and high enzymatic activity. We investigated the potential application of CALB-displaying Pichia pastoris cells for the production of flavor esters. The optimal conditions for flavor esters synthesis by this biocatalyst were determined in 50-ml shake flasks. Under optimized conditions, the synthesis of 12 kinds flavor esters were scaled up in a 5-l batch stirred reactor. Among these, the mole conversions of 10 exceeded 95% after reactions for 4h. In addition, this biocatalyst showed good tolerance for high substrates concentration and excellent operational stability. Repeated use of the cells in 10 batches resulted in an activity loss of less than 10%. Thus, CALB-displaying P. pastoris whole cells are robust biocatalysts with potential commercial application in the large-scale production of flavor esters in non-aqueous media.     

A study on the enzyme catalysed enantioselective hydrolysis of methyl 2-methyl-4-oxopentanoate,a precursor of chiral γ-butyrolactones

Porcine pancreas lipase (PPL) resolution of the α-methyl group of racemic methyl 2-methyl-4-oxopentanoate, a valuable synthetic precursor of fragrances and marine natural products, was enhanced by salt modulation of the enzymatic hydrolysis. For the enantioselective hydrolysis of the title ester, PPL was selected from a series of esterases and lipases, and its enantioselectivity was evaluated by changing the reaction medium parameters. The use of 1.6?mol L^–1 sodium sulfate in phosphate buffer (pH 7.2) improved the enantioselectivity allowing the formation of methyl (2R)-(+)-2-methyl-4-oxopentanoate and (2S)-(–)-2-methyl-4-oxopentanoic acid with an enantiomeric excess of >99% and 71%, respectively. The study showed that a modulation of PPL enantioselectivity could be achieved by using kosmotropic salts in the reaction media. The present method consists of a practical and low-cost option to improve enzymatic kinetic resolution reactions.