Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

Chainia Penicillin V Acylase: Strain Characteristics, Enzyme Immobilization, and Kinetic Studies

Aerobic cultures of an actinomycete were found to produce penicillin V acylase (PVA) (PA, EC-3.5.1.11) extracellularly. The presence of L-2-3 diamino-propionic acid in cell wall and formation of sclerotia on culture media led to its identification as Chainia, a sclerotial Streptomyces. Partially purified acylase was adsorbed on kieselguhr and entrapped in polyacrylamide gel. The immobilized preparation proved effective with respect to retention of enzyme and enzyme activity even after 15 successful cycles. The pH optimum for crude enzyme was in the range of pH 7.5–8.0, and for the (NH4)₂ SO₄ fraction it was pH 8.5. The immobilized enzyme showed maximal activity at pH 9.5. The optimum temperature for acylase activity was at 55°C. The crude enzyme, ammonium sulfate fraction, and immobilized enzyme showed K _m value for penicillin V of 6.13 mM, 14.3 mM, and 17.1 mM, respectively. Received: 11 December 1997 / Accepted: 9 April 1998     

Characterization of a novel immobilized biocatalyst obtained by matrix-assisted refolding of recombinant polyhydroxyoctanoate depolymerase from <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2442 isolated from inclusion bodies

Purification and matrix-assisted refolding of recombinant His-tagged polyhydroxyalkanoate (PhaZ) depolymerase from Pseudomonas putida KT2442 was carried out. His-tagged enzyme was overproduced as inclusion bodies in recombinant E. coli M15 (pREP4, pPAZ3), which were denatured by 8 M urea, immobilized on Ni²⁺-nitrilotriacetate-agarose matrix, and refolded by gradual removal of the chaotropic agent. The refolded enzyme could not be eluted with 1 M imidazole buffer, leading to an immobilized biocatalyst where PhaZ depolymerase was homogeneously distributed in the agarose support as shown by confocal scanning microscopy. Polyhydroxyoctanoate could not be hydrolyzed by this novel immobilized biocatalyst, whereas the attached enzyme was active in the hydrolysis of p-nitrophenyl alkanoate esters, which differed in their alkyl chain length. Taking advantage of the observed esterase activity on p-nitrophenylacetate, functional characterization of immobilized PhaZ depolymerase was carried out. The immobilized enzyme was more stable than its soluble counterpart and showed optimal hydrolytic activity at 37°C and 50 mM phosphate buffer pH 8.0. Kinetic parameters were obtained with both p-nitrophenylacetate and p-nitrophenyloctanoate, which had not been described so far for the soluble enzyme, representing an attractive and alternative chromogenic assay for the study of this paradigmatic enzyme.     

Production of high fructose syrup from <Emphasis Type="Italic">Asparagus</Emphasis> inulin using immobilized exoinulinase from <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> YS-1

Extracellular exoinulinase from Kluyveromyces marxianus YS-1, which hydrolyzes inulin into fructose, was immobilized on Duolite A568 after partial purification by ethanol precipitation and gel exclusion chromatography on Sephadex G-100. Optimum temperature of immobilized enzyme was 55 °C, which was 5 °C higher than the free enzyme and optimal pH was 5.5. Immobilized biocatalyst retained more than 90% of its original activity after incubation at 60 °C for 3 h, whereas in free form its activity was reduced to 10% under same conditions, showing a significant improvement in the thermal stability of the biocatalyst after immobilization. Apparent K _m values for inulin, raffinose and sucrose were found to be 3.75, 28.5 and 30.7 mM, respectively. Activation energy (E _a) of the immobilized biocatalyst was found to be 46.8 kJ/mol. Metal ions like Co²⁺ and Mn²⁺ enhanced the activity, whereas Hg²⁺ and Ag²⁺ were found to be potent inhibitors even at lower concentrations of 1 mM. Immobilized biocatalyst was effectively used in batch preparation of high fructose syrup from Asparagus racemosus raw inulin and pure inulin, which yielded 39.2 and 40.2 g/L of fructose in 4 h; it was 85.5 and 92.6% of total reducing sugars produced, respectively.     

Immobilization of pycnoporus coccineus laccase on Eupergit C: Stabilization and treatment of olive oil mill wastewaters

The use of olive oil mill wastewaters (OMW) as an organic fertilizer is limited by their phytotoxic effect, due to the high concentration of phenolic compounds. As an alternative to physico-chemical methods for OMW detoxification, the laccase from Pycnoporus coccineus, a white-rot fungus with the ability to decrease the chemical oxygen demand (COD) and color of the industrial effluent, is being studied. In this work, the P. coccineus laccase was immobilized on two acrylic epoxy-activated resins, Eupergit C and Eupergit C 250L. The highest activity was obtained with the macroporous Eupergit C 250L, reaching 110 U g^?1 biocatalyst. A substantial stabilization effect against pH and temperature was obtained upon immobilization. The soluble enzyme maintained ≥80% of its initial activity after 24 h at pH 7.0–10.0, whereas the immobilized laccase kept the activity in the pH range 3.0–10.0. The free enzyme was quickly inactivated at temperatures >50°C, whereas the immobilized enzyme was very stable up to 70°C. Gel filtration profiles of the OMW treated with the immobilized enzyme (for 8 h at room temperature) showed both degradation and polymerization of the phenolic compounds.     

The potential of immobilized bacterial α-amylase on coconut coir,a smart carrier for biocatalysts

Purified α-amylase from a soil bacterium Bacillus sp. SKB4 was immobilized on coconut coir, an inexpensive cellulosic fiber, with the cross-linking agent glutaraldehyde. The catalytic properties and stability of the immobilized enzyme were compared with those of its soluble form. The enzyme retained 97.2% of its activity and its catalytic properties were not drastically altered after immobilization. The pH optimum and stability of the immobilized enzyme were shifted towards the alkaline range compared to the free enzyme. The optimum temperature for enzymatic activity was 90°C in both forms of the enzyme. The soluble and immobilized enzyme retained 19% and 70% of original activity, respectively, after pre-incubation for 1 h at 90°C. Immobilized amylase was less susceptible to attack by heavy metal ions and showed higher K_m and V_max values than its free form. The bound enzyme showed significant activity and stability after 6 months of storage at 4°C. All of these characteristics make the new carrier system suitable for use in the bioprocess and food industries.     

Adsorption of peroxidase on Celite 545 directly from ammonium sulfate fractionated white radish (Raphanus sativus) proteins

This paper demonstrates the direct immobilization of peroxidase from ammonium sulfate fractionated white radish proteins on an inorganic support, Celite 545. The adsorbed peroxidase was crosslinked by using glutaraldehyde. The activity yield for white radish peroxidase was adsorbed on Celite 545 was 70% and this activity was decreased and remained 60% of the initial activity after crosslinking by glutaraldehyde. The pH and temperature-optima for both soluble and immobilized peroxidase was at pH 5.5 and 40°C. Immobilized peroxidase retained higher stability against heat and water-miscible organic solvents. In the presence of 5.0 mM mercuric chloride, immobilized white radish peroxidase retained 41% of its initial activity while the free enzyme lost 93% activity. Soluble enzyme lost 61% of its initial activity while immobilized peroxidase retained 86% of the original activity when exposed to 0.02 mM sodium azide for 1 h. The K_m values were 0.056 and 0.07 mM for free and immobilized enzyme, respectively. Immobilized white radish peroxidase exhibited lower V_max as compared to the soluble enzyme. Immobilized peroxidase preparation showed better storage stability as compared to its soluble counterpart.     

Immobilization of Candida rugosa lipase on poly(3-hydroxybutyrate-co-hydroxyvalerate): a new eco-friendly support

The overall objective of this study is to evaluate the morphological [scanning electron microscopy (SEM)], physicochemical [differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), chemical composition analysis, Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR)], and biochemical properties of Candida rugosa lipase (CRL) immobilized on a natural biopolymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. CRL was immobilized by physical adsorption with efficiency of 30%. Compared with free CRL enzyme, there were slight changes in immobilized CRL activity as a function of temperature (from 37°C to 45°C), but a similar optimal pH value of 7.0. Inactivation rate constants for immobilized CRL enzyme were 0.009 and 0.334 h⁻¹, and half-lives were 77 and 2 h at 40°C and 60°C, respectively. Kinetic parameters obtained for immobilized CRL include the Michaelis–Menten constant of K _m = 213.18 mM and maximum reaction velocity of V _max = 318.62 U/g. The operational stability of immobilized CRL was tested repeatedly, and after 12 cycles of reuse, the enzyme retained 50% activity. Based on our results, we propose that PHBV-immobilized CRL could serve as a promising biocatalyst in several industrial applications.     

Sucrose phosphorylase as cross-linked enzyme aggregate: Improved thermal stability for industrial applications

Sucrose phosphorylase is an interesting biocatalyst that can glycosylate a variety of small molecules using sucrose as a cheap but efficient donor substrate. The low thermostability of the enzyme, however, limits its industrial applications, as these are preferably performed at 60°C to avoid microbial contamination. Cross-linked enzyme aggregates (CLEAs) of the sucrose phosphorylase from Bifidobacterium adolescentis were found to have a temperature optimum that is 17°C higher than that of the soluble enzyme. Furthermore, the immobilized enzyme displays an exceptional thermostability, retaining all of its activity after 1 week incubation at 60°C. Recycling of the biocatalyst allows its use in at least ten consecutive reactions, which should dramatically increase the commercial potential of its glycosylating activity.     

Immobilization of Xylan-Degrading Enzymes from Scytalidium thermophilum on Eudragit L-100

Summary Xylanase from Scytalidium thermophilum was immobilized on Eudragit L-100, a pH sensitive copolymer of methacrylic acid and methyl methacrylate. The enzyme was non-covalently immobilized and the system expressed 70% xylanase activity. The immobilized preparation had broader optimum temperature of activity between 55 and 65 °C as compared to 65 °C in case of free enzyme and broader optimum pH between 6.0 and 7.0 as compared to 6.5 in case of free enzyme. Immobilization increased the t_1/2 of enzyme at 60 °C from 15 to 30 min with a stabilization factor of 2. The K_m and V_max values for the immobilized and free xylanase were 0.5% xylan and 0.89 μmol/ml/min and 0.35% xylan and 1.01 μmol/ml/min respectively. An Arrhenius plot showed an increased value of activation energy for immobilized xylanase (227 kcal/mol) as compared to free xylanase (210 kcal/mol) confirming the higher temperature stability of the free enzyme. Enzymatic saccharification of xylan was also improved by xylanase immobilization.     

Preparation and properties of an immobilized cellulase on the reversibly soluble matrix Eudragit L-100

Abstract

To prepare a smart biocatalyst, cellulase was immobilized on the reversibly soluble matrix Eudragit L-100 by non-covalent and covalent methods. Covalent immobilization using carbodiimide coupling exhibited superior enzyme loading and reusability compared with non-covalent immobilization, and the covalent loading was increased by almost 20% through the addition of N-hydroxysuccinimide. The temperature optimum of the cellulase was not improved apparently by immobilization but the pH optimum increased from 4.75 to 5.25. Immobilized cellulase was more active than free cellulase above pH 5.0. Immobilized cellulase was more stable than free cellulase during storage at 4°C, room temperature and 50°C. K_m values of immobilized and free cellulase were 85.55 and 73.84 g L^?1, respectively. About 50% productivity was retained after five cycles for hydrolysis of steam-exploded straw.     

Immobilization of goat brain aminopeptidase B in calcium alginate beads

Aminopeptidase B, an arginyl aminopeptidase, was purified from goat brain with a purification factor of ～280 and a yield of 2.7%. It was entrapped in calcium alginate together with bovine serum albumin. The optimal conditions for immobilization for maximum activity yield were 1% CaCl₂ and 2.5% alginate. The immobilized enzyme retained ～62% of its initial activity and could be used for five successive batch reactions with retention of 30% of the initial activity. The pH and temperature optima of the free and immobilized enzyme were pH 7.4, 45°C and pH 7.8, 50°C respectively, while the pH and thermal stability as well as the stability of the enzyme in organic solvents were improved significantly after entrapment. The K_m value for the immobilized enzyme was about twofold higher than that of the soluble enzyme. Because of this increased stability, the immobilized enzyme may be useful in the meat processing industry.     

Physico-Chemical Characterization of Watermelon Urease upon Immobilization in Alginate Beads

Watermelon (Citrullus vulgaris) urease was immobilized in 3.5% alginate leading to 72% immobilization. There was no leaching of the enzyme over a period of 15 days at 4°C. It continued to hydrolyse urea at a faster rate upto 90 min of incubation. The immobilized urease exhibited a shift of apparent pH optimum by one unit towards acidic side (from pH 8.0 to 7.0). The K_m was found to be 13.3 mM; 1.17 times higher than the soluble enzyme (11.4 mM). The beads were fairly stable upto 50°C and exhibited activity even at ?10°C. The enzyme was significantly activated by ME and it exhibited two peaks of activation; one at lower concentration and another at higher concentration. Time-dependent ureolysis in presence of ME progressed at a much elevated rate. Unlike soluble enzyme, which was inhibited at 200 mM urea, the immobilized enzyme was inhibited at 600 mM of urea and above, and about 47% activity was retained at 2000 mM urea. Moreover, the inhibition caused by high urea concentration was partially abolished by ME. The significance of the observations is discussed.     

Immobilization of pig muscle 3-phosphoglycerate kinase

3-Phosphoglycerate kinase (ATP:3-phospho-d-glycerate 1-phosphotransferase, EC 2.7.2.3) has been covalently immobilized on a polyacrylamide-type support containing carboxylic groups activated by water-soluble carbodiimide. The activity was 88 units g^?1 xerogel. The activity versus pH profile showed a sharper maximum at pH 6.5 in the case of the immobilized enzyme. The immobilized enzyme had a broad apparent optimum temperature range between 40 and 50°C. The apparent K_m values of the immobilized 3-phosphoglycerate kinase were lower for both 3-phosphoglycerate and ATP than those of the soluble enzyme. In the case of the immobilized enzyme stabilities were enhanced.     

IMMOBILIZATION OF OXALATE DECARBOXYLASE TO EUPERGIT AND PROPERTIES OF THE IMMOBILIZED ENZYME

Oxalate decarboxylase, an oxalate degradation enzyme used for medical diagnosis and decreasing the oxalate level in the food or paper industry, was covalently immobilized to Eupergit C. Different immobilization parameters, including ratio of enzyme to support, ammonia sulfate concentration, pH, and incubation time, were optimized. Under the condition of enzyme/support ratio at 1:20, pH 9, with 1.5 mol/L (NH₄)₂SO₄, room temperature, and shaking at 30 rpm for 24 hr, activity recovery of immobilized Oxdc reached 90% with an apparent specific activity of 0.44 U/mg support. The enzymatic properties of immobilized Oxdc were investigated and compared with those of the soluble enzyme. Both shared a similar profile of optimum conditions; the optimum pH and temperature for soluble and immobilized Oxdc were 3.5 and 50°C, respectively. The immobilized enzyme was more stable at lower pH and higher temperatures. The kinetic parameters for soluble and immobilized enzyme were also determined.     

Properties of soluble and immobilized Aspergillus niger β-xylosidase

Aspergillus niger β-xylosidase was characterized when in soluble form and when immobilized to alkylamine porous silica with glutaraldehyde and to alumina with titanium tetrachloride. Energies of activation averaged 13.4 KcaL/mol for the soluble enzyme, 9.0 Kcal/mol when immobilized to alumina, and 8.0 Kcal/mol when bound to silica. The highest activity of all forms of β-xylosidase was found near pH 3. The soluble enzyme was highly stable at pH 4, where lowest rates of decay occurred, and temperature of 65°C and below. The decay rates of alumina-bound β-xylosidase and pH 4 and equivalent temperatures were approximately 10 times as high. Michaells constants were 0.200 and 0.262mM for o-nitrophenyl-β-D -xylopyranoside with soluble and alumina-bound β-xylosidase, respectively.     

Immobilization of α-galactosidase on galactose-containing polymeric beads

Industrial application of α-galactosidase requires efficient methods to immobilize the enzyme, yielding a biocatalyst with high activity and stability compared to free enzyme. An α-galactosidase from tomato fruit was immobilized on galactose-containing polymeric beads. The immobilized enzyme exhibited an activity of 0.62 U/g of support and activity yield of 46%. The optimum pH and temperature for the activity of both free and immobilized enzymes were found as pH 4.0 and 37 °C, respectively. Immobilized α-galactosidase was more stable than free enzyme in the range of pH 4.0–6.0 and more than 85% of the initial activity was recovered. The decrease in reaction rate of the immobilized enzyme at temperatures above 37 °C was much slower than that of the free counterpart. The immobilized enzyme shows 53% activity at 60 °C while free enzyme decreases 33% at the same temperature. The immobilized enzyme retained 50% of its initial activity after 17 cycles of reuse at 37 °C. Under same storage conditions, the free enzyme lost about 71% of its initial activity over a period of 7 months, whereas the immobilized enzyme lost about only 47% of its initial activity over the same period. Operational stability of the immobilized enzyme was also studied and the operational half-life (t_1/2 was determined as 6.72 h for p-nitrophenyl α-d-galactopyranoside (PNPG) as substrate. The kinetic parameters were determined by using PNPG as substrate. The K_m and V_max values were measured as 1.07 mM and 0.01 U/mg for free enzyme and 0.89 mM and 0.1 U/mg for immobilized enzyme, respectively. The synthesis of the galactose-containing polymeric beads and the enzyme immobilization procedure are very simple and also easy to carry out.     

Characterization of molecular-sieve-bound inulinase

The enzyme inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7), prepared from Kluyveromyces marxianus has been immobilized using an inorganic solid support, molecular sieve 4A via the metal link method. The immobilized enzyme had around 22 units of inulinase activity per g of the support with retention of 72% of the original activity. The optimum protein to molecular sieve ratio for the maximum retention of inulinase activity was 9 mg/g molecular sieve. The properties of soluble and immobilized enzyme differed in many respects. The optimum pH of the enzyme shifted from 6 to 5 and the optimum temperature of enzyme activity changed from 50 to 55°C. K_m values were 6.7 mM for soluble enzyme and 10 mM for immobilized enzyme. The heat stability of the enzyme was improved by immobilization. Immobilized enzyme retained about 76% of the original activity after 40 days of storage at room temperature (30±2°C).     

Immobilization of pectinase fromSclerotium rolfsii

Immobilization of pectinase fromS. rolfsii was studied on different matrices of which Amberlite XAD-7 showed maximum adsorption and expression of the enzyme. The most active preparation was obtained when XAD-7 was activated with 2% glutaraldehyde and 1.7 μkat of enzyme per g resin was used for immobilization at pH 5.5 and 28°C. Optimum pH and temperature of theS. rolfsii pectinase remain unaltered, 3.5 and 55°C, respectively, after immobilization. However, the apparentK _M value of the enzyme decreased from 1.75 g/L for soluble enzyme preparation to 1.4 g/L for immobilized enzyme preparation. Both soluble and immobilized enzyme preparations were most stable at pH 4.0. The immobilized enzyme preparation was more stable than the soluble enzyme.     

Purification, immobilization and characterization of linoleic acid isomerase on modified palygorskite

Linoleic acid isomerase from Lactobacillus delbrueckii subsp. bulgaricus 1.1480 was purified by DEAE ion-exchange chromatography and gel filtration chromatography. An overall 5.1% yield and purification of 93-fold were obtained. The molecular weight of the purified protein was ~41 kDa which was analyzed by SDS-PAGE. The purified enzyme was immobilized on palygorskite modified with 3-aminopropyltriethoxysilane. The immobilized enzyme showed an activity of 82 U/g. The optimal temperature and pH for the activity of the free enzyme were 30 °C and pH 6.5, respectively; whereas those for the immobilized enzyme were 35 °C and pH 7.0, respectively. The immobilized enzyme was more stable than the free enzyme at 30–60 °C, and the operational stability result showed that more than 85% of its initial activity was retained after incubation for 3 h. The K _m and V _max values of the immobilized enzyme were found to be 0.0619 mmol l⁻¹ and 0.147 mmol h⁻¹ mg⁻¹, respectively. The immobilized enzyme had high operational stability and retained high enzymatic activity after seven cycles of reuse at 37 °C.