Infrared study of trifluoroacetic acid unpurified synthetic peptides in aqueous solution: trifluoroacetic acid removal and band assignment

Synthetic peptide or protein samples are mostly unpurified with trifluoroacetic acid (TFA) used during the synthesis procedure, which strongly interferes with structure determination by infrared (IR) spectroscopy. The aim of this work was to propose a simple strategy to remove TFA contribution from attenuated total reflection (ATR)–IR spectra of the hexahistidine peptide (His6) in aqueous solution to study the conformation of this synthetic peptide without previous purification. Such a strategy is based on the subtraction mode widely employed to remove water contribution, and it is tested with TFA unpurified histidine as a model system. The subtraction is based on eliminating the strong TFA bands at 1147 and 1200 cm⁻¹ by applying a scaling factor (as in buffer correction). The proposed modes represent excellent strategies that do not modify spectral features, and they provide reliable routines to obtain the synthetic peptide spectrum without TFA contribution. The conformational information from the corrected spectra at different pH values is deduced from semiempirical calculated IR spectra of different His6 conformers. The spectral features and the band positions of the corrected spectrum suggest that the peptide molecules mainly adopt an intermolecular β-sheet structure.     

Optimization of the hydrochloric acid concentration used for trifluoroacetate removal from synthetic peptides.

Trifluoroacetate (CF3COO-, or TFA) is almost always present in commercially synthesized peptides. Unfortunately, it has a strong infrared (IR) absorption band at 1673 cm-1, significantly overlapping or even completely obscuring the amide I band of a peptide. In such cases TFA must be removed from the solution in order to be able to use IR absorption spectroscopy for peptide secondary structure determination. The most convenient and widely used procedure involves peptide lyophilization from a 0.1 M HCl solution. In our studies of the tryptophan-rich antimicrobial peptide indolicidin, we have found that caution should be taken when using this HCl concentration. High HCl concentrations (>10 mM in unbuffered solutions and > 50 mM in buffered solutions) may modify the peptide structure and reduce its thermal stability, thereby interfering with subsequent structural investigations of the peptide. Our results indicate that HCl concentrations between 2 and 10 mM are adequate to remove essentially all TFA impurities without any modification of the peptide secondary structure.     

Efficient solution-phase synthesis of multiple O-phosphoseryl-containing peptides related to casein and statherin.

The multiple Ser(P)-containing peptides, H-Ser(P)-Ser(P)-Ser(P)-Glu-Glu-NHMe.TFA, H-Asp-Ser(P)-Ser(P)-Glu-Glu-NHMe.TFA and H-Glu-Ser(P)-Ser(P)-Glu-Glu-NHMe.TFA were prepared by the use of Boc-Ser(PO3Ph2)-OH in the Boc mode of solution phase peptide synthesis followed by platinum-mediated hydrogenolytic de-protection of the Ser(PO3Ph2)-containing peptides. The protected peptides were assembled using the mixed anhydride coupling methods with 40% TFA/CH2Cl2 used for removal of the Boc group from intermediate Boc-protected peptides.     

Citropin 1.1 Trifluoroacetate to Chloride Counter-Ion Exchange in HCl-Saturated Organic Solutions: An Alternative Approach

In view of the increasing interest in peptides in various market sectors, a stronger emphasis on topics related to their production has been seen. Fmoc-based solid phase peptide synthesis, although being fast and efficient, provides final products with significant amounts of trifluoroacetate ions in the form of either a counter-ion or an unbound impurity. Because of the proven toxicity towards cells and peptide activity inhibition, ion exchange to more biocompatible one is purposeful. Additionally, as most of the currently used counter-ion exchange techniques are time-consuming and burdened by peptide yield reduction risk, development of a new approach is still a sensible solution. In this study, we examined the potential of peptide counter-ion exchange using non-aqueous organic solvents saturated with HCl. Counter-ion exchange of a model peptide, citropin 1.1 (GLFDVIKKVASVIGGL-NH₂), for each solvent was conducted through incubation with subsequent evaporation under reduced pressure, dissolution in water and lyophilization. Each exchange was performed four times and compared to a reference method—lyophilization of the peptide from an 0.1 M HCl solution. The results showed superior counter-ion exchange efficiency for most of the organic solutions in relation to the reference method. Moreover, HCl-saturated acetonitrile and tert-butanol provided a satisfying exchange level after just one repetition. Thus, those two organic solvents can be potentially introduced into routine peptide counter-ion exchange.     

Chemical Cleavage of Bovine β-Lactoglobulin by BNPS-Skatole for Preparative Purposes: Comparative Study of Hydrolytic Procedures and Peptide Characterization

A comparative study of various procedures for tryptophanyl peptide bond cleavage by BNPS-skatole [2-(2-nitrophenyl)-3-methyl-3-bromoindolenine] was carried out on native and on reduced and alkylated bovine β-lactoglobulin (BLG). The reaction yield and the composition of the derived products were studied in acetic acid, trifluoroacetic acid (TFA), and ethanol/TFA. For BNPS-skatole removal, extraction by water or ethyl ether was compared with dialysis and gel filtration. The three expected peptides (1–19, 20–61, 62–162) and incomplete cleaved fragments (1–61, 20–162) were separated and characterized by electrophoresis, reverse-phase high-performance liquid chromatography, and mass spectrometry. The highest hydrolysis yield (67.4%) occurred with native BLG cleaved in 88% acetic acid at 47°C for 60 min. Subsequent water extraction and gel filtration led to total recovery of the material, but reagent elimination was only quantitative after gel filtration. Cleavage specificity was ensured by mass spectrometry and the amino acid composition of peptides 1–19 and 62–162. The chemical side reactions identified are discussed.     

A Dde resin based strategy for inverse solid-phase synthesis of amino terminated peptides, peptide mimetics and protected peptide intermediates.

This report describes a Dde resin based attachment strategy for inverse solid-phase peptide synthesis (ISPPS). This attachment strategy can be used for the synthesis of amino terminated peptides with side chains and the carboxyl terminus either protected or deprotected. Amino acid t-butyl esters were attached through their free amino group to the Dde resin. The t-butyl carboxyl protecting group was removed by 50% TFA, and inverse peptide synthesis cycles performed using an HATU/TMP based coupling method. Protected peptides were cleaved from the resin with dilute hydrazine. Side chain protecting groups could then be removed by treatment with TFMSA/TFA. The potential of this approach was demonstrated by the synthesis of several short protected and unprotected peptides in good yield and with low epimerization. Its potential for peptide mimetic synthesis was demonstrated by the synthesis of two peptide trifluoromethylketones.     

Rapid and effective removal of perfluorooctanoic acid from proteomics samples

We recently demonstrated that perfluorooctanoic acid (PFOA), a volatile surfactant, is as effective as sodium dodecyl sulfate at solubilizing the membrane proteins. PFOA can be removed by repeated evaporation prior to mass spectrometry analysis. However, the removal of PFOA by evaporation is a lengthy process that takes approximately 6 h. Toward the goal of decreasing the length of time required to remove PFOA from protein digests, we tested the efficiency of PFOA removal and subsequent peptide recovery using strong cation exchange (SCX) chromatography, hydrophilic interaction chromatography (HILIC), fluorous solid phase extraction (FSPE), and anion exchange (ANX) chromatography. We found that all these chromatographic techniques except ANX chromatography remove PFOA thoroughly from protein digest. Peptide recovery rates from the SCX chromatography varied widely; nonacidic peptides were recovered at a rate of up to 95%, while acidic peptides were recovered at a rate of less than 10%. On the other hand, acidic peptides were recovered well from HILIC, while peptides whose pIs are greater than 6 were recovered poorly. Peptide recovery using FSPE was considerably lower, less than 10% for most of the peptides. These results indicate that the SCX and HILIC chromatography provide a more rapid alternative to the evaporation method for applications in which recovery of entire set of peptides is not required.     

Investigation of an on-line two-dimensional chromatographic approach for peptide analysis in plasma by LC–MS–MS

Reversed phase and hydrophilic interaction chromatography (HILIC) were successfully coupled for the on-line extraction and quantitative analysis of peptides by ESI–LC–MS/MS. A total of 11 peptides were utilized to determine the conditions for proper focusing and separation on both dimensions. Minor modifications to the initial organic composition of the first reversed-phase dimension provided options between a comprehensive (generic) or more selective approach for peptide transfer to the second HILIC dimension. Ion-pairing with trifluoroacetic acid (TFA) provided adequate chromatographic retention and peak symmetry for the selected peptides on both C₁₈ and HILIC. The resulting signal suppression from TFA was partially recovered by a post-column “TFA fix” using acetic acid yielding improvements in sensitivity. Minimal sample preparation aligned with standard on-line extraction procedures provided highly reproducible and robust results for over 300 sequential matrix injections. Final optimized conditions were successfully employed for the quantitation of peptide PTHrP (1–36) in rat K₃EDTA plasma from 25.0 to 10,000 ng/mL using PTHrP (1–34) as the analog internal standard. This highly orthogonal two-dimensional configuration was found to provide the unique selectivity required to overcome issues with interfering endogenous components and minimize electrospray ionization effects in biological samples.     

Separation of 17 DL-amino acids and chiral sequential analysis of peptides by reversed-phase liquid chromatography after labeling with R(-)-4- (3-isothiocyanatopyrrolidin-1-yl)-7-(N, N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole

Seventeen DL-amino acids labeled with a fluorescent chiral labeling reagent, R(-)-4-(3-isothiocyanatopyrrolidin-1-yl)-7-(N, N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole (R(-)-DBD-PyNCS), were separated by reversed-phase chromatography and detected fluorometrically at 550 nm (excitation at 460 nm). The reagent reacted with amino functional group in dl-amino acids under basic medium. The thiocarbamoyl derivatives were converted to thiohydantoin via thiazolinone in trifluoroacetic acid (TFA) solution. The epimerization ratios during the reaction of the cyclization were less than 37% in all dl-amino acids tested. The resulting thiohydantoin derivatives of individual dl-amino acids were completely separated with isocratic elutions using acidic mobile phase involving 0.1% TFA. The separations of the thiohydantoins yielded from acidic, basic, neutral, hydroxyl, and aromatic amino acids were good enough for the identification of dl-amino acid. The method using the reagent was adopted to identification of dl-amino acid sequences in eight peptides. The separation and identification of the thiohydantoin derivatives liberated from the peptides labeled were performed by the isocratic elutions. The applicability of the proposed procedure to sequential analysis of peptide was demonstrated with [D-Ala(2)]-leucine enkephalin, [D-Ala(2)]-deltorphin II, d-Phe-Met-Arg-Phe-amide, and Phe-D-Met-Arg-Phe-amide. D-Ala, D-Phe, and D-Met in the peptides were positively identified with the proposed procedures. [L-Ala(2)]-leucine enkephalin, beta-lipotropin, Asp-Ser-Asp-Pro-Arg, and Pro-Asp-Val-Asp-His-Val-Phe-Leu-Arg-Phe-amide were also analyzed as the references without D-amino acid.     

A method for the facile solid-phase synthesis of gramicidin S and its analogs

Summary A simple method is described for the facile synthesis of gramicidin S and six other analogs, using standard solidphase synthetic technology and a single solution-phase cyclization step. The peptides were purified to homogeneity and characterized by plasma desorption time-of-flight mass spectrometry and NMR spectroscopy. Complete ¹H NMR assignments for all seven peptides (in aqueous solution) are presented. Unlike previous approaches, the presented method is simple, automatable, rapid (less than three days), high-yielding, requires no side-chain protection during cyclization, and appears to be generally applicable to the preparation of a variety of related head-to-tail cyclic peptides.Abbreviations Boc t-butyloxycarbonyl - BOP benzotriazoyl N-oxytris(dimethylamino)phosphonium hexafluorophosphate - Bzl benzyl - DCC N,N-dicyclohexylcarbodiimide - DCM dichloromethane - DIEA N,N-diisopropylethylamine - DMF N,N-dimethylformamide - DQF-COSY double-quantum-filtered correlation spectroscopy - DSS 2,2-dimethyl-2-silapentane-5-sulfonate, sodium salt - EDAC 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide - HBTU 2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyl uronium hexafluorophosphate - HOBt 1-hydroxybenzotriazole - 4-MeBzl 4-methylbenzyl - NHS N-hydroxysuccinimide - NOESY nuclear Overhauser effect spectroscopy - PAM phenylacetamidomethyl (resin) - RP-HPLC reversed-phase high-performance liquid chromatography - TFA trifluoroacetic acid - TOCSY total correlation spectroscopy - Tos tosyl - Troc 2,2,2-trichloroethylcarbamate.     

C-terminal N-alkylated peptide amides resulting from the linker decomposition of the Rink amide resin: a new cleavage mixture prevents their formation.

Decomposition of the resin linkers during TFA cleavage of the peptides in the Fmoc strategy leads to alkylation of sensitive amino acids. The C-terminal amide alkylation, reported for the first time, is shown to be a major problem in peptide amides synthesized on the Rink amide resin. This side reaction occurs as a result of the Rink amide linker decomposition under TFA treatment of the peptide resin. The use of 1,3-dimethoxybenzene in a cleavage cocktail prevents almost quantitatively formation of C-terminal N-alkylated peptide amides. Oxidized by-product in the tested Cys- and Met-containing peptides were not observed, even if thiols were not used in the cleavage mixture.     

Replacement of trifluoroacetic acid with HCl in the hydrophobic purification steps of pediocin PA-1: a structural effect

Trifluoroacetic acid (TFA) is a purification contaminant associated with pediocin PA-1 that interferes with Fourier transform infrared spectroscopy structural analysis. As revealed by circular dichroism, its presence affects the structural folding of pediocin. Consequently, we propose a new pediocin PA-1 purification procedure using HCl instead of TFA in all of the hydrophobic steps. This procedural change does not affect the purification yield or the amount of pediocin PA-1 purified. Furthermore, removing HCl, as opposed to TFA, after purification is an easier procedure to carry out. In fact, the removal of TFA requires more experimentation and results in protein loss. Thus, HCl is a good alternative to TFA in pediocin PA-1 purification and can be extended to the purification of other proteins. We also show that TFA-induced structural modifications do not significantly affect the antimicrobial activity of pediocin PA-1.     

Replacement of Trifluoroacetic Acid with HCl in the Hydrophobic Purification Steps of Pediocin PA-1: a Structural Effect

Trifluoroacetic acid (TFA) is a purification contaminant associated with pediocin PA-1 that interferes with Fourier transform infrared spectroscopy structural analysis. As revealed by circular dichroism, its presence affects the structural folding of pediocin. Consequently, we propose a new pediocin PA-1 purification procedure using HCl instead of TFA in all of the hydrophobic steps. This procedural change does not affect the purification yield or the amount of pediocin PA-1 purified. Furthermore, removing HCl, as opposed to TFA, after purification is an easier procedure to carry out. In fact, the removal of TFA requires more experimentation and results in protein loss. Thus, HCl is a good alternative to TFA in pediocin PA-1 purification and can be extended to the purification of other proteins. We also show that TFA-induced structural modifications do not significantly affect the antimicrobial activity of pediocin PA-1.     

Stability of the O-octanoyl group of rat ghrelin during chemical synthesis: Counter-ion-dependent alteration of an ester bond breakage

Rat ghrelin, a 28-amino acid residue peptide with an octanoyl group at the side chain of Ser3, was synthesized chemically by applying Fmoc/^tBu strategy. An ester linkage between octanoic acid and the hydroxyl function of Ser3 was found to be maintained without serious damage during the final deprotection with trifluoroacetic acid (TFA). The most notable finding was the counter-ion-dependent stability change of the octanoyl moiety in the molecule. After consolidation of the counter-ion to TFA (TFA form), the octanoyl group persisted stably upon dissolution in water, whereas in the case of the acetate-form peptide, both de-octanoylation and dehydration (formation of the dehydro-Ala residue) occurred in aqueous solution at the same Ser3 residue. The amounts of these degraded products varied with factors such as solvent, temperature and times of lyophilization. These experimental findings lay the basis for performing the bioassay of ghrelin, which has an octanoyl moiety involved in its numerous biological activities thus far revealed.     

Stability of the O-octanoyl group of rat ghrelin during chemical synthesis: Counter-ion-dependent alteration of an ester bond breakage

Summary Rat ghrelin, a 28-amino acid residue peptide with an octanoyl group at the side chain of Ser3, was synthesized chemically by applying Fmoc/ ^t Bu strategy. An ester linkage between octanoic acid and the hydroxyl function of Ser3 was found to be maintained without serious damage during the final deprotection with trifluoroacetic acid (TFA). The most notable finding was the counter-ion-dependent stability change of the octanoyl moiety in the molecule. After consolidation of the counter-ion to TFA (TFA form), the octanoyl group persisted stably upon dissolution in water, whereas in the case of the acetate-form peptide, both de-octanoylation and dehydration (formation of the dehydro-Ala residue) occurred in aqueous solution at the same Ser3 residue. The amounts of these degraded products varied with factors such as solvent, temperature and times of lyophilization. These experimental findings lay the basis for performing the bioassay of ghrelin, which has an octanoyl moiety involved in its numerous biological activities thus far revealed.     

Characterization of secondary amide peptide bond isomerization: thermodynamics and kinetics from 2D NMR spectroscopy

Secondary amide cis peptide bonds are of even lower abundance than the cis tertiary amide bonds of prolines, yet they are of biochemical importance. Using 2D NMR exchange spectroscopy (EXSY) we investigated the formation of cis peptide bonds in several oligopeptides: Ac-G-G-G-NH(2) , Ac-I-G-G-NH(2) , Ac-I-G-G-N-NH(2) and its cyclic form: I-G-G-N in dimethylsulfoxide (DMSO). From the NMR studies, using the amide protons as monitors, an occurrence of 0.13-0.23% of cis bonds was obtained at 296 K. The rate constants for the trans to cis conversion determined from 2D EXSY spectroscopy were 4-9 × 10(-3) s(-1) . Multiple minor conformations were detected for most peptide bonds. From their thermodynamic and kinetic properties the cis isomers are distinguished from minor trans isomers that appear because of an adjacent cis peptide bond. Solvent and sequence effects were investigated utilizing N-methylacetamide (NMA) and various peptides, which revealed a unique enthalpy profile in DMSO. The cyclization of a tetrapeptide resulted in greatly lowered cis populations and slower isomerization rates compared to its linear counterpart, further highlighting the impact of structural constraints.     

Synthesis of glyoxylyl peptides using an Fmoc-protected alpha,alpha'-diaminoacetic acid derivative.

The synthesis of glyoxylyl peptides by coupling the masked glyoxylic acid derivative (FmocNH)(2)CHCO(2)H, 1, to a peptidyl resin assembled using Fmoc/tert-butyl chemistry has been described recently. Deprotection and cleavage of the peptide from the solid support using TFA was followed by unmasking of the glyoxylyl group in solution in the presence of DBU. [] The glyoxylyl peptide was thus generated using non-oxidizing conditions by comparison with the method based on the periodic oxidation of a seryl-precursor. However, base treatment of the (FmocNH)(2)CHCO(2)-peptide led to the formation of a byproduct besides the desired glyoxylyl peptide. This paper describes an optimized procedure for unmasking the Fmoc-protected alpha,alpha'-diaminoacetic acid moiety in solution which suppressed byproduct formation. Also presented is a series of experiments that permitted a structure and a mechanism of formation for the byproduct to be suggested.     

Acid-labile anchoring linkages for solid phase synthesis of C-terminal asparagine peptides using the Fmoc strategy

Two acid-labile substituted benzylamine type anchoring linkages, 4-benzoxy-2,6-dimethoxybenzylamine and 2-benzoxy-4,6-dimethoxybenzylamine, for solid phase synthesis of peptide amides were prepared. The Na-9-fluorenylmethyloxycarbonyl (Fmoc) amino acids could be easily attached to the resins with DCC/HOBt (loading 0.5-0.6 mmol/g resin). After final removal of the Na-protecting groups, treatment with TFA (50-95%) yielded amino acid and peptide amides in high purity. As we could show for the synthesis of thymulin (FTS, pGlu-Ala-Lys-Ser-Gln-Gly-Gly-Ser-Asn), these two resins with anchoring linkages are well suited for the synthesis of C-terminal Asn peptides using protected aspartic acid derivative as starting material.     

Characterization and analysis of biphalin: an opioid peptide with a palindromic sequence.

Among the many opioid peptides developed to date as nonaddictive analgesics, biphalin has exhibited extraordinary high potency and many other desirable characteristics. Biphalin is an octapeptide consisting of two monomers of a modified enkephalin, attached via a hydrazine bridge, and with the amino acids assembled in a palindromic sequence. Its structure is (Tyr-D-Ala-Gly-Phe-NH-)-2. However, this unique peptide, like any other synthetic peptide, needs strict quality control because of certain drawbacks associated with peptide synthesis. This paper discusses our approaches to characterizing and analyzing biphalin. Many techniques were used, including elemental analysis, amino acid analysis, amino acid sequence analysis (AASA), mass spectrometry (MS), 1H-NMR, 1H-correlated spectroscopy (COSY)-NMR, high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Electrospray ionization (ESI) mass spectrometry, which included both ESI-MS and ESI-MS/MS, was performed to confirm the full sequence because AASA results alone verified only the monomer sequence, and not the full sequence. Although the 1H-NMR results led to a preliminary assignment of many protons, the 1H COSY-NMR results allowed for unequivocal assignment of almost all protons. Peptide purity was determined using two techniques, reversed-phase HPLC and CE. The counter-ion of the peptide, trifluoroacetic acid, was determined by CE, using an indirect detection method developed previously in our laboratory. This paper illustrates successful application of nonconventional techniques to characterize and analyze a structurally modified peptide, biphalin, when standard techniques for peptide analysis are inadequate.     

Chemical cleavage of bovine beta-lactoglobulin by BNPS-skatole for preparative purposes: comparative study of hydrolytic procedures and peptide characterization

A comparative study of various procedures for tryptophanyl peptide bond cleavage by BNPS-skatole [2-(2-nitrophenyl)-3-methyl-3-bromoindolenine] was carried out on native and on reduced and alkylated bovine -lactoglobulin (BLG). The reaction yield and the composition of the derived products were studied in acetic acid, trifluoroacetic acid (TFA), and ethanol/TFA. For BNPS-skatole removal, extraction by water or ethyl ether was compared with dialysis and gel filtration. The three expected peptides (1–19, 20–61, 62–162) and incomplete cleaved fragments (1–61, 20–162) were separated and characterized by electrophoresis, reverse-phase high-performance liquid chromatography, and mass spectrometry. The highest hydrolysis yield (67.4%) occurred with native BLG cleaved in 88% acetic acid at 47°C for 60 min. Subsequent water extraction and gel filtration led to total recovery of the material, but reagent elimination was only quantitative after gel filtration. Cleavage specificity was ensured by mass spectrometry and the amino acid composition of peptides 1–19 and 62–162. The chemical side reactions identified are discussed.