Optimization of media for β-fructofuranosidase production by Aspergillus niger in submerged and solid state fermentation

The kinetics of β-fructofuranosidase (Ffase) production by Aspergillus niger in submerged (SmF) and solid-state fermentation (SSF) systems was investigated. The maximum productivity of Ffase (81.8 U/l per h) was obtained in SSF for 72 h while it was 18.3 U/l per h in SmF for 120 h. The productivity of extra cellular Ffase produced in SSF was 5-fold higher than in SmF. Optimization of fermentation medium for Ffase production was carried out using De Meo's fractional factorial design with seven components such as (NH₄)₂SO₄, KH₂PO₄, FeSO₄, MgSO₄ · 7H₂O, sucrose, urea and yeast extract. The media designed for SmF after two steps of optimization supported the growth of A. niger and higher productivity of Ffase (58.3 U/l per h) than with the medium before optimization. The optimized medium of SmF when used in SSF, did not improve the Ffase productivity and therefore medium for SSF was optimized independent of SmF. After two optimization steps, the media was defined for SSF which supported the growth and high level of Ffase productivity (149.1 U/l per h) in SSF compared to the medium before optimization (81.8 U/l per h) and optimized medium for SmF (58.3 U/l per h). Our results suggested that the optimized media for SmF and SSF for the production of Ffase have to be different.     

Exopectinases produced by Aspergillus niger in solid-state and submerged fermentation: a comparative study

Exopectinase production by Aspergillus niger was compared in submerged fermentation (SmF) and solid-state fermentation (SSF). SSF was carried out using polyurethane foam (PUF) as the solid support. The purpose was to study the effect of sucrose addition (0 or 40 g/l) and water activity level (A _w=0.99 or 0.96) on the level of enzyme activity induced by 15 g/l of pectin. Mycelial growth, as well as extracellular protease production, was also monitored. Sucrose addition in SmF resulted in catabolite repression of exopectinase activity. However, in SSF, an enhancement of enzyme activity was observed. Protease levels were minimal in SSF experiments with sucrose and maximal in SmF without sucrose. Exopectinase yields (IU/g X) were negligible in SmF with sucrose. The high levels of exopectinase with sucrose and high A _w in SSF can be explained by a much higher level of biomass production without catabolite repression and with lower protease contamination. Journal of Industrial Microbiology & Biotechnology (2001) 26, 271–275. Received 05 July 2000/ Accepted in revised form 27 January 2001     

Comparative production of cellulases by mutants of Penicillium janthinellum NCIM 1171 and its application in hydrolysis of Avicel and cellulose

Mutants of Penicillium janthinellum NCIM 1171 were evaluated for cellulase production using both submerged fermentation (SmF) and solid state fermentation (SSF). Mutant EU2D-21 gave highest yields of cellulases in both SmF and SSF. Hydrolysis of Avicel and cellulose were compared using SmF and SSF derived enzyme preparations obtained from EU2D-21. Surprisingly, the use of SSF derived preparation gave less hydrolysis compared to SmF derived enzymes. This may be due to inactivation of β-glucosidase at 50 °C in SSF derived enzyme preparations. SmF derived enzyme preparations contained both thermostable and thermosensitive β-glucosidases where as SSF derived enzyme preparations contained predominantly thermosensitive β-glucosidase. This is the first report on less thermostability of SSF derived β-glucosidase which is the main reason for getting less hydrolysis.     

Effect of fermentation system on the production and properties of tannase of Aspergillus niger van Tieghem MTCC 2425

The tannase-producing efficiency of liquid-surface fermentation (LSF) and solid-state fermentation (SSF) vis-à-vis submerged fermentation (SmF) was investigated in a strain of Aspergillus niger, besides finding out if there was a change in the activity pattern of tannase in these fermentation processes. The studies on the physicochemical properties were confined to intracellular tannase as only this form of enzyme was produced by A. niger in all three fermentation processes. In LSF and SmF, the maximum production of tannase was observed by 120 h, whereas in SSF its activity peaked at 96 h of growth. SSF had the maximum efficiency of enzyme production. Tannase produced by the SmF, LSF and SSF processes had similar properties except that the one produced during SSF had a broader pH stability of 4.5-6.5 and thermostability of 20 degrees-60 degrees C.     

Ethanol from lignocellulosic materials by a simultaneous saccharification and fermentation process (SFS) with Kluyveromyces marxianus CECT 10875

Simultaneous saccharification and fermentation (SSF) process for ethanol production from various lignocellulosic woody (poplar and eucalyptus) and herbaceous (Sorghum sp. bagasse, wheat straw and Brassica carinata residue) materials has been assayed using the thermotolerant yeast strain Kluyveromyces marxianus CECT 10875. Biomass samples were previously treated in a steam explosion pilot plant to provide pretreated biomass with increased cellulose content relative to untreated materials and to enhance cellulase accessibility. SSF experiments were performed in laboratory conditions at 42 °C, 10% (w/v) substrate concentration and 15 FPU/g substrate of commercial cellulase. The results indicate that it is possible to reach SSF yields in the range of 50–72% of the maximum theoretical SSF yield, based on the glucose available in pretreated materials, in 72–82 h. Maximum ethanol contents from 16 to 19 g/l were obtained in fermentation media, depending on the material tested.     

Mycophenolic acid production in solid-state fermentation using a packed-bed bioreactor

Mycophenolic acid (MPA) was produced from Penicillium brevicompactum by solid-state fermentation (SSF) using pearl barley, and submerged fermentation (SmF) using mannitol. It was found that SSF was superior to SmF in terms of MPA concentration (1219 mg/L vs. 60 mg/L after 144 h fermentation), and the product yields were 6.1 mg/g pearl barley for SSF and 1.2 mg/g mannitol for SmF. The volumetric productivities were 8.5 and 0.42 mg/L h for SSF and SmF, respectively.The optimum solid substrate of SSF for MPA production was pearl barley, producing 5470 mg/kg compared with wheat bran (1601 mg/kg), oat (3717 mg/kg) and rice (2597 mg/kg). The optimum moisture content, incubation time and inoculum concentrations were 70%, 144 h and 6%, respectively. Neither the addition of mannitol or (NH4)₂HPO₄ nor adjustment of media pH within the range of 3–7 significantly enhanced MPA production.MPA production by SSF using a packed-bed bioreactor was performed and an increased maximum production of MPA 6.9 mg/g was achieved at 168 h incubation time. The higher volumetric productivity and concentrations makes SSF an attractive alternative to SmF for MPA production.     

Production of Xylanase by Thermophilic Melanocarpus albomyces IIS-68

Melanocarpus albomyces IIS-68, a thermophilic fungus was used for the production of extracellular xylanase on various agroresidues in solid-state fermentation (SSF). Growth on untreated wheat straw and sugar cane bagasse supported xylanase production, while rice straw and rice husk did not. Alkali treatment and acid chlorite treatment of these latter substrates, which lead to extensive delignification, enhanced xylanase production. In contrast, these treatments caused a decline in xylanase activity on wheat straw and bagasse. Acetyl esterase was produced concurrently with xylanase, maximal activity being produced on bagasse. Enzyme production was higher in SSF than in submerged fermentation (SmF). Studies with electron micrographs indicated that culture filtrate proteins were able to degrade wall polymers.     

Laccase production in solid‐state and submerged fermentation by Pleurotus ostreatus

A solid‐state fermentation (SSF) system for production of an industrially important enzyme laccase by Pleurotus ostreatus was developed by using potato dextrose yeast extract medium and polyurethane foam as a supporting material. The maximum laccase production in the SSF system was as high as 3×10⁵ U/L. Addition of inducers, such as copper and ferulic acid, further enhanced the laccase production in SSF. Moreover, the time required for the maximum laccase production was reduced to 6 days compared to 10 days reported earlier. The improvement achieved by the SSF system was investigated by comparing it to a submerged fermentation system (SmF), both experimentally and by using a standard theoretical model along with a parameter sensitivity analysis. Laccase production in SSF was found to be twice of that in SmF. One of the main reasons for higher laccase production in SSF compared to SmF was possibly due to the presence of higher proteolytic activity in SmF. Strong proteolytic activity in SmF presumably caused subsequent laccase degradation, which lowered the ultimate laccase production in SmF compared to SSF.     

固液态发酵中橄榄油对Rhizopus chinensis全细胞脂肪酶的影响

主要对华根霉全细胞脂肪酶固态和液态两种发酵过程进行比较,并着重探讨不同培养方式下橄榄油对其合成活力和水解活力的影响。结果表明：液态培养较有利于菌体生长,对脂肪酶的生产也有一定的促进作用。橄榄油的加入不仅有利于菌体生长、提高脂肪酶水解活力,更可使脂肪酶的合成活力显著增加,液态发酵下的效果更为明显。橄榄油在整个发酵过程中可能既作为碳源又是脂肪酶的诱导物。另外,全细胞脂肪酶的水解活力和合成活力在固液态发酵条件下均存在不对应性,表明华根霉可能产性质不同的脂肪酶同功酶。     

Lipase production and Penicillium simplicissimum morphology in solid-state and submerged fermentations

A comparative study of Penicillium simplicissimum morphology and lipase production was performed using solid-state (SSF) and submerged (SmF) fermentation. SSF was carried out on babassu cake as culture medium and SmF on a semi-synthetic medium and a medium based on suspended babassu cake grains. Yield of product on biomass, specific activity and conidia production were 3.3-, 1.3- and 2-fold higher in SSF. In SmF, the type of fungus growth differed according to the medium. Using the semi-synthetic medium, the fungus formed densely interwoven mycelial masses without conidia production, whereas using the babassu-based medium the fungus formed free mycelia and adhered to the surfaces of the grains, producing conidia. The results show that babassu cake induces conidiation in SmF. In SSF, the fungus not only grew on the surface of the grains, producing conidia abundantly, but also effectively colonized and penetrated the babassu particles. The high conidia production and lipase productivity in SSF may be related to the low availability of nutrients or to other stimuli associated with this type of fermentation. Thus, the high production of the thermostable P. simplicissimum lipase, using a non-supplemented, low-cost agro-industrial residue as the culture medium, demonstrates the biotechnological potential of SSF for the production of industrial enzymes.     

Production and Regulation of Lipase Activity from <Emphasis Type="Italic">Penicillium restrictum</Emphasis> in Submerged and Solid-State Fermentations

Different carbon (C) sources, mainly carbohydrates and lipids, have been screened for their capacity to support growth and lipase production by Penicillium restrictum in submerged fermentation (SmF) and in solid-state fermentation (SSF). Completely different physiological behaviors were observed after the addition of easily (oleic acid and glucose) and complex (olive oil and starch) assimilable C sources to the liquid and solid media. Maximal lipolytic activities (12.1 U/mL and 17.4 U/g) by P. restrictum were obtained with olive oil in SmF and in SSF, respectively. Biomass levels in SmF (12.2–14.1 mg/mL) and SSF (7.0–8.0 mg/g) did not varied greatly with the distinct C sources used. High lipase production (12.3 U/g) using glucose was only attained in SSF, perhaps due to the ability of this fermentation process to minimize catabolite repression.     

Enzymatic hydrolysis and simultaneous saccharification and fermentation of alkali/peracetic acid-pretreated sugarcane bagasse for ethanol and 2,3-butanediol production

The enzymatic digestibility of alkali/peracetic acid (PAA)-pretreated bagasse was systematically investigated. The effects of initial solid consistency, cellulase loading and addition of supplemental β-glucosidase on the enzymatic conversion of glycan were studied. It was found the alkali-PAA pulp showed excellent enzymatic digestibility. The enzymatic glycan conversion could reach about 80% after 24 h incubation when enzyme loading was 10 FPU/g solid. Simultaneous saccharification and fermentation (SSF) results indicated that the pulp could be well converted to ethanol. Compared with dilute acid pretreated bagasse (DAPB), alkali-PAA pulp could obtain much higher ethanol and xylose concentrations. The fermentation broth still showed some cellulase activity so that the fed pulp could be further converted to sugars and ethanol. After the second batch SSF, the fermentation broth of alkali-PAA pulp still kept about 50% of initial cellulase activity. However, only 21% of initial cellulase activity was kept in the fermentation broth of DAPB. The xylose syrup obtained in SSF of alkali-PAA pulp could be well converted to 2,3-butanediol by Klebsiella pneumoniae CGMCC 1.9131.     

Algal biomass: A sustainable,economical and renewable approach for microbial production of pectinolytic enzymes using submerged and solid state fermentation techniques

In the past decade, algal waste has been used as useful natural resource for production of enormous range of products that have wide economical and commercial importance. Pectinases are group of enzymes that have wide commercial applications. Hence, current study was designed to utilize algal biomass for the production of pectinases using submerged (SmF) and solid state fermentation (SSF) techniques. Different algal sources including brown (Dictyopteris polypodioides, Sargassum wightii and Dictyopteris divaricata) and green algae (Ulva lactuca and Codium tomentosum) were used and U. lactuca was found to be the most suitable substrate. Several bacterial and fungal strains were screened and among them Bacillus licheniformis KIBGE-IB4 was selected based on maximum pectinase production. SmF and SSF were studied utilizing U. lactuca as a substrate and results revealed that enzyme production was favoured by SmF (2457?±?3.31?U?mg^?1) as compared to SSF (1432?±?1.46?U?mg^?1). Parametric optimization of pectinase production indicated that B. licheniformis KIBGE-IB4 requires 10.0?g L^–1 U. lactuca as a biomass in the medium with a pH 7.0 when incubated at 37?°C for 24 hours. Likewise, production of pectinase using algal resource was also compared with that of the conventional agricultural biomass and it was observed that when U. lactuca was used, the selected bacterial isolate produced a higher yield of enzyme than sugarcane bagasse and rice husk. Hence, it is anticipated that algal biomass can be efficiently utilized as an environmental friendly bioresource for the production of industrially important hydrolytic enzymes.     

Saccharification and fermentation of Sugar Cane bagasse by Klebsiella oxytoca P2 containing chromosomally integrated genes encoding the Zymomonas mobilis ethanol pathway

Pretreatment of sugar cane bagasse is essential for a simultaneous saccharification and fermentation (SSF) process which uses recombinant Klebsiella oxytoca strain P2 and Genencor Spezyme CE. Strain P2 has been genetically engineered to express Zymomonas mobilis genes encoding the ethanol pathway and retains the native ability to transport and metabolize cellobiose (minimizing the need for extracellular cellobiase). In SSF studies with this organism, both the rate of ethanol production and ethanol yield were limited by saccharification at 10 and 20 filter papaer units (FPU) g(-1) acid-treated bagasse. Dilute slurries of biomass were converted to ethanol more efficiently (over 72% of theoretical yield) in simple batch fermentations than slurries containing high solids albeit with the production of lower levels of ethanol. With high solids (i.e., 160 g acid-treated bagasse L(-1)), a combination of 20 FPU cellulase g(-1) bagasse, preincubation under saccharification conditions, and additional grinding (to reduce particle size) were required to produce ca. 40 g ethanol L(-1). Alternatively, almost 40 g ethanol L(-1) was produced with 10 FPU cellulase g(-1) bagasse by incorporating a second saccharification step (no further enzyme addition) followed by a second inoculation and short fermentation. In this way, a theoretical ethanol yield of over 70% was achieved with the production of 20 g ethanol 800 FPU(-1) of commercial cellulase. (c) 1994 John Wiley & Sons, Inc.     

Production of pectinase from deseeded sunflower head by Aspergillus niger in submerged and solid-state conditions

Studies were carried out on the production of pectinases using deseeded sunflower head by Aspergillus niger DMF 27 and DMF 45 in submerged fermentation (SmF) and solid-state fermentation (SSF). Higher titres of endo- and exo-pectinases were observed when medium was supplemented with carbon (4% glucose for SmF and 6% sucrose for SSF) and nitrogen (ammonium sulphate, 0.3% for both SmF and SSF) sources. Green gram husk proved to be relatively a better supplement to attain higher yield of endo-pectinase (11.7 U/g) and exo-pectinase (30.0 U/g) in solid-state conditions. Maximum production of endo-pectinase (19.8 U/g) and exo-pectinase (45.9 U/g) by DMF 45 were recorded in SSF when compared to endo-pectinase (18.9 U/ml) and exo-pectinase (30.3 U/ml) by DMF 27 in SmF under optimum process conditions.     

Production of SCP and cellulase by Aspergillus terreus from bagasse substrate

The fermentation of 1.0% untreated bagasse under optimum cultural and nutritional conditions with Aspergillus terreus GN1 indicated that the maximum rate of protein and cellulase production could be obtained during three days of submerged fermentation. Even though 16.4% protein recovery, 0.55 units CMCase/mL, and 0.027 FPase units/mL were obtained on the seventh day, the rates of increase in protein recovery and cellulase production were slower than those obtained up to these days, which were 14.3% protein recovery, 0.45 units CMCase/mL, and 0.019 units FPase/mL. There was an initial lag in the utilization of cellulose up to two days due to the utilization of the water-soluble carbohydrate present in untreated bagasse. Cellulose utilization and water-soluble carbohydrate content during fermentation were correlated with protein recovery and enzyme production. The protein and cellulase production during three days fermentation with 1.0% untreated and treated bagasse were compared and the protein content of the total biomass was calculated and treated bagasse were compared and the protein content of the biomass was calculated into constituent protein contributed by the fungal mycelium and the under graded bagasse. The total biomass recovered with untreated and treated bagasse was 1020 and 820 mg/g bagasse substrate, respectively, and contained 14.3 and 20.6% crude protein, respectively. The contribution of fungal biomass and under graded bagasse was 309 and 711, and 373 and 447 mg/g untreated and treated bagasse substrates, respectively. In an 8-L-flask trial during three days of fermentation, the recovery of SCP and cellulase were 66 g and 32,400 units (Sigma) for treated bagasse and 82 g and 8200 units (Sigma) for untreated bagasse, respectively.     

Biotechnological advantages of laboratory-scale solid-state fermentation with fungi

Despite the increasing number of publications dealing with solid-state (substrate) fermentation (SSF) it is very difficult to draw general conclusion from the data presented. This is due to the lack of proper standardisation that would allow objective comparison with other processes. Research work has so far focused on the general applicability of SSF for the production of enzymes, metabolites and spores, in that many different solid substrates (agricultural waste) have been combined with many different fungi and the productivity of each fermentation reported. On a gram bench-scale SSF appears to be superior to submerged fermentation technology (SmF) in several aspects. However, SSF up-scaling, necessary for use on an industrial scale, raises severe engineering problems due to the build-up of temperature, pH, O₂, substrate and moisture gradients. Hence, most published reviews also focus on progress towards industrial engineering. The role of the physiological and genetic properties of the microorganisms used during growth on solid substrates compared with aqueous solutions has so far been all but neglected, despite the fact that it may be the microbiology that makes SSF advantageous against the SmF biotechnology. This review will focus on research work allowing comparison of the specific biological particulars of enzyme, metabolite and/or spore production in SSF and in SmF. In these respects, SSF appears to possess several biotechnological advantages, though at present on a laboratory scale only, such as higher fermentation productivity, higher end-concentration of products, higher product stability, lower catabolic repression, cultivation of microorganisms specialized for water-insoluble substrates or mixed cultivation of various fungi, and last but not least, lower demand on sterility due to the low water activity used in SSF.     

Effect of different cultural conditions for phytase production by <Emphasis Type="Italic">Aspergillus niger</Emphasis> CFR 335 in submerged and solid-state fermentations

The present article deals with the studies on the effect of media ingredients, such as carbon, nitrogen, inorganic phosphates, surfactants, and metal salts, on phytase enzyme production by Aspergillus niger CFR 335 in submerged (SmF) and solid-state fermentations (SSF). The results obtained showed a 1.5-fold higher enzyme yield in the presence of sucrose in both SmF and SSF, while peptone was found to be a favorable nitrogen source for SmF. Sodium dihydrogen phosphate (NaH₂PO₄) favored 34% higher enzyme yield than the control, which was followed by 19% higher activity in potassium dihydrogen phosphate (KH₂PO₄) in SSF at 0.015% w/v. The addition of Tween-20 in SmF showed a maximum yield of 12.6 U/mL while, SDS suppressed the growth of the fungus. None of the surfactants favored the enzyme yield in SSF. Calcium chloride (CaCl₂) was extensively efficient in stimulating more than 55% higher phytase production in SmF at 0.01% v/v. In SSF, none of the metal salts stimulated phytase production.     

Solid-state fermentation increases secretome complexity in Aspergillus brasiliensis

Aspergillus is used for the industrial production of enzymes and organic acids, mainly by submerged fermentation (SmF). However, solid-state fermentation (SSF) offers several advantages over SmF. Although differences related to lower catabolite repression and substrate inhibition, as well as higher extracellular enzyme production in SSF compared to SmF have been shown, the mechanisms undelaying such differences are still unknown. To explain some differences among SSF and SmF, the secretome of Aspergillus brasiliensis obtained from cultures in a homogeneous physiological state with high glucose concentrations was analyzed. Of the regulated proteins produced by SmF, 74% were downregulated by increasing the glucose concentration, whereas all those produced by SSF were upregulated. The most abundant and upregulated protein found in SSF was the transaldolase, which could perform a moonlighting function in fungal adhesion to the solid support. This study evidenced that SSF: (i) improves the kinetic parameters in relation to SmF, (ii) prevents the catabolite repression, (iii) increases the branching level of hyphae and oxidative metabolism, as well as the concentration and diversity of secreted proteins, and (iv) favors the secretion of typically intracellular proteins that could be involved in fungal adhesion. All these differences can be related to the fact that molds are more specialized to growth in solid materials because they mimic their natural habitat.