Prolonged release of chlorambucil and etoposide from poly-3-oxybutyrate-based microspheres

Microspheres were obtained on the basis of poly(3-oxibutyrate) (POB) with the inclusion of the Chlorambucil and Etoposide cytostatic drugs in a polymer matrix, and the morphology, kinetics of drug release from microspheres, and the interaction between microspheres and tumor cells in vitro were studied. Data on the kinetics of drug release suggests that a prolonged release occurs by drug diffusion from the polymer matrix at the initial stage and at the expense of hydrolytic degradation of the polymer at a later stage. A study of the biocompatibility and biological activity of biopolymeric microspheres showed that chlorambucil operates actively and strongly inhibits the growth of cultured cells for a short time (24 h). Etoposide acts weaker (the percentage of cell growth suppression during 48 h does not exceed 50%), but subsequently it has a basis for the creation of new dosage forms with prolonged action of Etoposide and chlorambucil for cancer therapy.     

Novel mathematical method for quantitative expression of deviation from the Higuchi model

A simple mathematical method to express the deviation in release profile of a test product following Higuchi's kinetics from an ideal Higuchi release profile was developed. The method is based on calculation of area under the curve (AUC) by using the trapezoidal rule. The precision of prediction depends on the number of data points. The method is exemplified for 2 dosage forms (tablets of diltiazem HCl and microspheres of diclofenac sodium) that are designed to release the drug over a 12-hour period. The method can be adopted for the formulations where drug release is incomplete (<100%) or complete (100%) at last sampling time. To describe the kinetics of drug release from the test formulation, zero-order, first-order, Higuchi's. Hixson-Crowell's, and Weibull's models were used. The criterion for selecting the most appropriate model was based on the goodness-of-fit test. The release kinetics of the tablets and microspheres were explained by the Higuchi model. The release profiles of the test batches were slightly below the ideal Higuchi release profile. For the test products, observed percentage deviation from an ideal Higuchi profile is less than 16% for tablets and less than 11% for microspheres. The proposed method can be extended to the modified release formulations that are designed to release a drug over 6, 18, or 24 hours. If the data points are not evenly separated, the ideal drug release profile and AUC are calculated according to the specific sampling time. The proposed method may be used for comparing formulated products during the research and development stage, for quality control of the products, or for promoting products by comparing performance of the test product with that of the innovator's product.     

Spray-dried poly(D,L-lactide) microspheres containing carboplatin for veterinary use: In vitro and in vivo studies

The aim of this study was the development of a veterinary dosage form constituted by injectable biodegradable microspheres designed for the subcutaneous release of carboplatin, a chemotherapeutic drug. Poly(D,L-lactide) (PDLLA) microspheres were prepared by an emulsification/spray-drying method, using the drug-to-polymer weight ratios 1∶9 and 1∶5; blank microspheres (1% w/v) were prepared as a comparison. Microparticles were characterized in terms of morphology, encapsulation efficiency, and in vitro drug release behavior. In vivo tests were conducted on rats by subcutaneous injection of microsphere aqueous suspensions. Levels of carboplatin were evaluated both in the skin and in serum. The microparticles obtained had a spherical shape; particle size ranged from 5 to 7 μm, dependent on drug loading. Microspheres were able to control the in vitro release of the drug: approximately 90% to 100% of the carboplatin was released over 30 days. In vivo results showed that the microspheres were able to release high drug amounts locally, and sustained serum levels of drug were also achieved. Based on these results, carboplatin-loaded PDLLA microspheres may be useful for local delivery of the antineoplastic drug to the tumor, avoiding tumor recurrence in small animals, and may decrease the formation of distant metastases. Published: September 20, 2005     

In vivo release kinetics of octreotide acetate from experimental polymeric microsphere formulations using oil/water and oil/oil processes

The purpose of the present study was to characterize the in vivo release kinetics of octreotide acetate from microsphere formulations designed to minimize peptide acylation and improve drug stability. Microspheres were prepared by a conventional oil/wate (o/w) method or an experimental oil/oil (o/o) dispersion technique. The dosage forms were administered subcutaneously to a rat animal model, and serum samples were analyzed by radioimmunoassay over a 2-month period. An averaged kinetic profile from each treatment group, as a result, was treated with fractional differential equations. The results indicated that poly(l-lactide) microspheres prepared by the o/o dispersion technique provided lower area under the curve (AUC) values during the initial diffusion-controlled release phase, 7.79 ng×d/mL, versus 75.8 ng/sxd/mL for the o/w batch. During the subsequent erosion-controlled release phase, on the other hand, the o/o technique yielded higher AUC values, 123 ng×d/mL, versus 42.2 ng×d/mL for the o/w batch. The differences observed between the 2 techniques were attributed to the site of drug incorporation during the manufacturing process, given that microspheres contain both porous hydrophilic channels and dense hydrophobic matrix regions. An o/o dispersion technique was therefore expected to produce microspheres with lower incorporation in the aqueous channels, which are responsible for diffusion-mediated drug release.     

Comparative Study of Propranolol hydrochloride Release from Matrix Tablets with Kollidon®SR or Hydroxy Propyl Methyl Cellulose

The release of propranolol hydrochloride from matrix tablets with hydroxy propyl methyl cellulose (HPMC K15M) or KollidonSR at different concentrations was investigated with a view to developing twice daily sustained release dosage form. A hydrophilic matrix-based tablet using different concentrations of HPMC K15M or KollidonSR was developed using direct compression technique to contain 80 mg of propranolol hydrochloride. The resulting matrix tablets prepared with HPMC K15M or KollidonSR fulfilled all the official requirements of tablet dosage forms. Formulations were evaluated for the release of propranolol hydrochloride over a period of 12 h in pH 6.8 phosphate buffer using USP type II dissolution apparatus. Propranolol hydrochloride and pure KollidonSR or HPMC K15M compatibility interactions was investigated by using Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). FTIR spectroscopic and DSC studies revealed that there was no well defined chemical interaction between propranolol hydrochloride with KollidonSR or HPMC K15M. Tablets were exposed to 40 degrees C/75% of RH in open disc for stability. The in vitro drug release study revealed that HPMC K15 at a concentration of 40% of the dosage form weight was able to control the release of propranolol hydrochloride for 12 h, exhibit non-Fickian diffusion with first-order release kinetics where as at 40% KollidonSR same dosage forms show zero-order release kinetics. In conclusion, the in vitro release profile and the mathematical models indicate that release of propranolol hydrochloride can be effectively controlled from a single tablet using HPMC K15M or KollidonSR matrix system.     

Development of a dialysis in vitro release method for biodegradable microspheres

The purpose of this research was to develop a simple and convenient in vitro release method for biodegradable microspheres using a commercially available dialyzer. A 25 KD MWCO Float-a-Lyzer was used to evaluate peptide diffusion at 37°C and 55°C in different buffers and assess the effect of peptide concentration. In vitro release of Leuprolide from PLGA microspheres, having a 1-month duration of action, was assessed using the dialyzer and compared with the commonly used “sample and separate” method with and without agitation. Peptide diffusion through the dialysis membrane was rapid at 37°C and 55°C in all buffers and was independent of peptide concentration. There was no detectable binding to the membrane under the conditions of the study. In vitro release of Leuprolide from PLGA microspheres was tri-phasic and was complete in 28 days with the dialysis technique. With the sample and separate technique, linear release profiles were obtained with complete release occurring under conditions of agitation. Diffusion through the dialysis membrane was sufficiently rapid to qualify the Float-a-Lyzer for an in vitro release system for microparticulate dosage forms. Membrane characteristics render it useful to study drug release under real-time and accelerated conditions. Published: October 6, 2005     

Two-stage optimization process for formulation of chitosan microspheres

The objective of the present study was to optimize the concentration of a chitosan solution, stirring speed, and concentration of drugs having different aqueous solubility for the formulation of chitosan microspheres. Chitosan microspheres (unloaded and drug loaded) were prepared by the chemical denaturation method and were subjected to measurement of morphology, mean particle size, particle size distribution, percentage drug entrapment (PDE), drug loading, and drug release (in vitro). Morphology of the microspheres was dependent on the level of independent process parameters. While mean particle size of unloaded microspheres was found to undergo significant change with each increase in concentration of chitosan solution, the stirring rate was found to have a significant effect only at the lower level (ie, 2000 to 3000 rpm). Of importance, spherical unloaded microspheres were also obtained with a chitosan solution of concentration less than 1 mg/mL. Segregated unloaded microspheres with particle size in the range of 7 to 15 microm and mean particle size of 12.68 microm were obtained in the batch prepared by using a chitosan solution of 2 mg/mL concentration and stirring speed of 3000 rpm. The highest drug load ( microg drug/mg microspheres) was 50.63 and 13.84 for microspheres containing 5-fluorouracil and methotrexate, respectively. While the release of 5-fluorouracil followed Higuchi's square-root model, methotrexate released more slowly with a combination of first-order kinetics and Higuchi's square-root model. The formation of chitosan microspheres is helped by the use of differential stirring. While an increase in the concentration of water-soluble drug may help to increase PDE and drug load over a large concentration range, the effect is limited in case of water-insoluble drugs.     

Microparticulate Based Topical Delivery System of Clobetasol Propionate

Psoriasis is a chronic, autoimmune skin disease affecting approximately 2% of the world's population. Clobetasol propionate which is a superpotent topical corticosteroid is widely used for topical treatment of psoriasis. Conventional dosage forms like creams and ointments are commonly prefered for the therapy. The purpose of this study was to develop a new topical delivery system in order to provide the prolonged release of clobetasol propionate and to reduce systemic absorption and side effects of the drug. Clobetasol propionate loaded-poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres were prepared by oil-in-water emulsion–solvent evaporation technique. Particle size analysis, morphological characterization, DSC and XRD analyses and in vitro drug release studies were performed on the microparticle formulations. Emulgel formulations were prepared as an alternative for topical delivery of clobetasol propionate. In vitro drug release studies were carried out from the emulgel formulations containing pure drug and drug-loaded microspheres. In addition, the same studies were performed to determine the drug release from the commercial cream product of clobetasol propionate. The release of clobetasol propionate from the emulgel formulations was significantly higher than the commercial product. In addition, the encapsulation of clobetasol propionate in the PLGA microspheres significantly delayed the drug release from the emulgel formulation. As a result, the decrease in the side effects of clobetasol propionate by the formulation containing PLGA microspheres is expected.     

Mucoadhesive vaginal tablets as veterinary delivery system for the controlled release of an antimicrobial drug,acriflavine

The aim of the study was the development of mucoadhesive vaginal tablets designed for the local controlled release of acriflavine, an antimicrobial drug used as a model. The tablets were prepared using drug-loaded chitosan microspheres and additional excipients (methylcellulose, sodium alginate, sodium carboxymethylcellulose, or Carbopol 974). The microspheres were prepared by a spray-drying method, using the drug to polymer weight ratios 1:1 and 1:2 and were characterized in terms of morphology, encapsulation efficiency, and in vitro release behavior, as MIC (Minimum Inhibitory Concentration), MBC (Minimum Bacterial Concentration), and killing time (KT). The tablets were prepared by direct compression, characterized by in vitro drug release and in vitro mucoadhesive tests. The microparticles have sizes of 4 to 12 microm; the mean encapsulation yields are about 90%. Acriflavine, encapsulated into the polymer, maintains its antibacterial activity; killing time of the encapsulated drug is similar to that of the free drug. In vitro release profiles of tablets show differences depending on the excipient used. In particular Carbopol 974, which is highly cross-linked, is able to determine a drug-controlled release from the matrix tablets for more than 8 hours. The in vitro adhesion tests, carried out on the same formulation, show a good adhesive behavior. The formulation containing microspheres with drug to polymer weight ratios of 1:1 and Carbopol 974 is characterized by the best release behavior and shows good mucoadhesive properties. These preliminary data indicate that this formulation can be proposed as a mucoadhesive vaginal delivery system for the controlled release of acriflavine.     

Preparation,in vitro release,in vivo absorption and biocompatibility studies of insulin-loaded microspheres in rabbits

The purpose of this study was to develop a single-dose insulin delivery system based on poly (lactide-co-glycolide) (PLGA) microspheres to provide basal insulin level for a prolonged period. Insulin-loaded PLGA microspheres were prepared by water-in-oil-in-water double emulsion (batch A) and solid-in-oil-in-water emulsion (batch B) methods. Microspheres were characterized for physical characteristics and in vitro release. In vivo absorption of insulin and biocompatibility of insulin-loaded PLGA microspheres were performed in diabetic New Zealand white rabbits. Light and transmission electron microscopy were performed on the skin tissues excised from microspheres injected sites in order to study the biocompatibility. The burst release of insulin was high (47%) from batch B and low (5%) from batch A. Therefore, we mixed microspheres of batch A and B in ratio of 3:1 w/w, which produced desirable in vitro release profile. In vivo absorption study showed that insulin-loaded microspheres provided a serum insulin level of 20-40 microU/ml up to 40 days. Biocompatibility study provided evidence of normal inflammatory and foreign body reactions, which were characterized by the presence of macrophages, fibroblasts and foreign body giant cells. Neither necrosis nor tissue damage was identified. At the end of 12 weeks, no distinct histological differences were observed in comparison to the control tissue samples. In conclusion, insulin-loaded PLGA microspheres controlled the in vivo absorption of insulin to maintain the basal insulin level for longer period and the delivery system was biocompatible.     

Controlled release from triple layer,donut-shaped tablets with enteric polymers

The purpose of this research was to evaluate triple layer, donut-shaped tablets (TLDSTs) for extended release dosage forms. TLDSTs were prepared by layering 3 powders sequentially after pressing them with a punch. The core tablet consisted of enteric polymers, mainly hydroxypropyl methylcellulose acetate succinate, and the bottom and top layers were made of a water-insoluble polymer, ethyl cellulose. Drug release kinetics were dependent on the pH of the dissolution medium and the drug properties, such as solubility, salt forms of weak acid and weak base drugs, and drug loading. At a 10% drug loading level, all drugs, regardless of their type or solubility, yielded the same release profiles within an acceptable level of experimental error. As drug loading increased from 10% to 30%, the drug release rate of neutral drugs increased for all except sulfathiazole, which retained the same kinetics as at 10% loading. HCl salts of weak base drugs had much slower release rates than did those of neutral drugs (eg, theophylline) as drug loading increased. The release of labetalol HCl retarded as drug loading increased from 10% to 30%. On the other hand, Na salts of weak acid drugs had much higher release rates than did those of neutral drugs (eg, theophylline). Drug release kinetics were governed by the ionization/erosion process with slight drug diffusion, observing no perfect straight line. A mathematical expression for drug release kinetics (erosion-controlled system) of TLDSTs is presented. In summary, a TLDST is a good design to obtain zero-order or nearly zero-order release kinetics for a wide range of drug solubilities.     

Formulation and in vitro, in vivo evaluation of extended- release matrix tablet of Zidovudine: Influence of combination of hydrophilic and hydrophobic matrix formers

The aim of the present study was to prepare and characterize extended-release matrix tablets of zidovudine using hydrophilic Eudragit RLPO and RSPO alone or their combination with hydrophobic ethyl cellulose. Release kinetics was evaluated by using United States Pharmacopeia (USP)-22 type I dissolution apparatus. Scanning electron microscopy was used to visualize the effect of dissolution medium on matrix tablet surface. Furthermore, the in vitro and in vivo newly formulated sustained-release zidovudine tablets were compared with conventional marketed tablet (Zidovir, Cipla Ltd, Mumbai, India). The in-vitro drug release study revealed that either Eudragit preparation was able to sustain the drug release only for 6 hours (94.3%±4.5% release). Combining Eudragit with ethyl cellulose sustained the drug release for 12 hours (88.1%±4.1% release). Fitting the in vitro drug release data to Korsmeyer equation indicated that diffusion along with erosion could be the mechanism of drug release. In vivo investigation in rabbits showed sustained-release pharmacokinetic profile of zidovudine from the matrix tablets formulated using combination of Eudragits and ethylcellulose. In conclusion, the results suggest that the developed sustained-release tablets of zidovudine could perform therapeutically better than conventional dosage forms, leading to improve efficacy and better patient compliance. Published: January 3, 2006     

Evaluation of acrylate-based block copolymers prepared by atom transfer radical polymerization as matrices for paclitaxel delivery from coronary stents

Acrylate-based block copolymers, synthesized by atom transfer radical polymerization (ATRP) processes, were evaluated as drug delivery matrices for the controlled release of paclitaxel from coronary stents. The polymers were multiblock copolymers consisting of poly(butyl acrylate) or poly(lauryl acrylate) soft blocks and hard blocks composed of poly(methyl methacrylate), poly(isobornyl acrylate), or poly(styrene) homo- or copolymers. Depending on the ratio of hard to soft blocks in the copolymers, coating formulations were produced that possessed variable elastomeric properties, resulting in stent coatings that maintained their integrity when assessed by scanning electron microscopy (SEM) imaging of overexpanded stents. In vitro paclitaxel release kinetics from coronary stents coated with these copolymers typically showed an early burst followed by sustained release behavior, which permitted the elution of the majority of the paclitaxel over a 10-day time period. It was determined that neither the nature of the polyacrylate (n-butyl or lauryl) nor that of the hard block appeared to affect the release kinetics of paclitaxel at a loading of 25% drug by weight, whereas some effects were observed at lower drug loading levels. Differential scanning calorimetry (DSC) analysis indicated that the paclitaxel was at least partially miscible with the poly(n-butyl acrylate) phase of those block copolymers. The copolymers were also evaluated for sterilization stability by exposing both the copolymer alone and copolymer/paclitaxel coated stents to e-beam radiation at doses of 1-3 times the nominal dose used for medical device sterilization (25 kGy). It was found that the copolymers containing blocks bearing quaternary carbons within the polymer backbone were less stable to the radiation and showed a decrease in molecular weight as determined by gel-permeation chromatography. Conversely, those without quaternary carbons showed no significant change in molecular weight when exposed to 3 times the standard radiation dose. There was no significant change in drug release profile from any of the acrylate-based copolymers after exposure to 75 kGy of e-beam radiation, and this was attributed to the inherent radiation stability of the poly(n-butyl acrylate) center block.     

Preparation of biodegradable microspheres and matrix devices containing naltrexone

In this study, the use of biodegradable polymers for microencapsulation of naltrexone using solvent evaporation technique is investigated. The use of naltrexone microspheres for the preparation of matrix devices is also studied. For this purpose, poly(L-lactide) (PLA) microspheres containing naltrexone prepared by solvent evaporation technique were compressed at temperatures above the Tg of the polymer. The effect of different process parameters, such as drug/polymer ratio and stirring rate during preparation of microspheres, on the morphology, size distribution, and in vitro drug release of microspheres was studied. As expected, stirring rate influenced particle size distribution of microspheres and hence drug release profiles. By increasing the stirring speed from 400 to 1200 rpm, the mean diameter of microspheres decreased from 251 μm to 104 μm. The drug release rate from smaller microspheres was faster than from larger microspheres. However, drug release from microspheres with low drug content (20% wt/wt) was not affected by the particle size of microspheres. Increasing the drug content of microspheres from 20% to 50% wt/wt led to significantly faster drug release from microspheres. It was also shown that drug release from matrix devices prepared by compression of naltrexone microspheres is much slower than that of microspheres. No burst release was observed with matrix devices. Applying higher compression force, when compressing microspheres to produce tablets, resulted in lower drug release from matrix devices. The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a PLA microparticulate system or matrix devices.     

Influence of selected formulation variables on the preparation of enzyme-entrapped eudragit S100 microspheres

The aim of this work is to study the influence of formulation parameters in the preparation of sustained release enzyme-loaded Eudragit S100 microspheres by emulsion solvent diffusion technique. A 3(2) full factorial experiment was designed to study the effects of the amount of solvent (dichloromethane) and stabilizers (Tween 20, 40, or 80) on the drug content and microsphere size. The results of analysis of variance test for both effects indicated that the test is significant. The effect of amount of stabilizer was found to be higher on both responses (SS(Y1) = 45.60; SS(Y2) = 737.93), whereas solvent concentration comparatively produced significant effect on the size of microspheres (SS(Y1) = 0.81; SS(Y2) = 358.83). Scanning electron microscopy of microspheres with maximum drug content (2.5 mL dichloromethane and 0.1 mL Tween 80) demonstrated smooth surface spherical particles with mean diameter of 56.83 +/- 2.88 microm. The effect of formulation variables on the integrity of enzyme was confirmed by in vitro proteolytic activity. The enteric nature of microspheres was evaluated and results demonstrated ~6% to 7% release of enzyme in acidic medium. The release of enzyme from microspheres followed Higuchi kinetics. In phosphate buffer, microspheres showed an initial burst release of 20.34% +/- 2.35% in 1 hour with additional 58.79% +/- 4.32% release in the next 5 hours. Three dimensional response graphs were presented to visualize the effect of independent variables on the chosen response. Thus, Eudragit S100 microspheres can be successfully prepared for oral delivery of enzymes with desirable characters in terms of maximum loading and diffusion release pattern.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Synthesis and characterization of hydroxyapatite-ciprofloxacin delivery systems by precipitation and spray drying technique

This investigation synthesized and characterized hydroxyapatite (HAP) microspheres, agglomerated microspheres, and implants containing ciprofloxacin. This delivery system is to be used as an implantable drug delivery system for the treatment of bone infections. The HAP microspheres were made by chemical precipitation followed by a spray-drying technique. Agglomerated microspheres were prepared by a wet granulation process using a granulator. Implants were prepared by direct compression of the granules on a Carver press. Ciprofloxacin was analyzed by high-performance liquid chromatography. Characterization of the HAP microspheres include particle size, size distribution, physical state of the drug in the microsphere, and microstructure of the drug delivery system before and after in vitro release. The particle size, porosity, and morphology of the microspheres were dependent on viscosity and concentration of the slurry as well as the atomization pressure used during spray drying. Even at the highest drug load (2% wt/wt), the drug was present in a noncrystalline state. The drug release from the agglomerated microspheres was quick and almost complete within 1 hour. However, compressing the same amount of agglomerated microspheres into an implant greatly reduced the rate of ciprofloxacin release. Only 12% (wt/wt) of the drug was released from the implant within 1 hour. The in vitro release of ciprofloxacin from these implants follows a diffusion-controlled mechanism. This method provides a unique way of producing various shapes and drug loads of HAP microspheres that can be easily manufactured on a commercial scale. Published: January 28, 2002.     

Preparation and characterization of sodium hexameta phosphate cross-linked chitosan microspheres for controlled and sustained delivery of centchroman

The cross-linked microspheres using chitosan with different molecular weights and degree of deacetylation have been prepared in presence of sodium hexameta polyphosphate (SHMP) as physical cross-linker. The degree of cross-linking through electrostatic interactions in chitosan microspheres has been evaluated by varying the charge density on chitosan and varying degree of dissociation of sodium hexameta polyphosphate by solution pH. The degree of deacetylation and molecular weight of chitosan has controlled electrostatic interactions between hexameta polyphosphate anions and chitosan, which played significant role in swelling, loading and release characteristics of chitosan microspheres for centchroman. The microspheres prepared by hexameta polyphosphate anions cross-linker were compact and more hydrophobic than covalently cross-linked microspheres, which has been attributed to the participation of all amino groups of chitosan in physical cross-linking with added hexameta polyphosphate anions. The microspheres prepared under different experimental conditions have shown an initial step of burst release, which was followed by a step of controlled release for centchroman. The extent of drug release in these steps has shown dependence on properties of chitosan and degree of cross-linking between chitosan and added polyanions. The degree of swelling and release characteristics of microspheres was also studied in presence of organic and inorganic salts, which shown significant effect on controlled characteristics of microspheres due to variations in ionic strength of the medium. The initial step of drug release has followed first order kinetics and become zero order after attaining an equilibrium degree of swelling in these microspheres. The microspheres prepared using chitosan with 62% (w/w) degree of deacetylation and molecular weight of 1134 kg mol⁻¹ have shown a sustained release for centchroman for 50 h at 4% (w/w) degree of cross-linking with SHMP.     

Cellulose-Based Matrix Microspheres of Prednisolone Inclusion Complex: Preparation and Characterization

The purpose of the present investigation was to encapsulate pure prednisolone (PRD) and PRD–hydroxypropyl-β-cyclodextrin (HPβCD) complex in cellulose-based matrix microspheres. The system simultaneously exploits complexation technique to enhance the solubility of low-solubility drug (pure PRD) and subsequent modulation of drug release from microspheres (MIC) at a predetermined time. The microspheres of various compositions were prepared by an oil-in-oil emulsion–solvent evaporation method. The effect of complexation and presence of cellulose polymers on entrapment efficiency, particle size, and drug release had been investigated. The solid-state characterization was performed by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, and powder X-ray diffractometry. The morphology of MIC was examined by scanning electron microscopy. The in vitro drug release profiles from these microspheres showed the desired biphasic release behavior. After enhancing the solubility of prednisolone by inclusion into HPβCD, the drug release was easily modified in the microsphere formulation. It was also demonstrated that the CDs in these microspheres were able to modulate several properties such as morphology, drug loading, and release properties. The release kinetics of prednisolone from microspheres followed quasi-Fickian and first-order release mechanisms. In addition to this, the f ₂-metric technique was used to check the equivalency of dissolution profiles of the optimized formulation before and after stability studies, and it was found to be similar. A good outcome, matrix microspheres (coded as MIC5) containing PRD–HPβCD complex, showed sustained release of drug (95.81%) over a period of 24 h.